AI Coding Neovim

AI Coding Neovim — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

ISSCO Graphics

Integrated Software Systems Corporation (ISSCO), doing business as ISSCO Graphics, was an American software developer and publisher based in San Diego, California, and active from 1970 to 1986. They were best known for their enterprise graphics software packages, including Tellagraf, CueChart and Disspla. == History == ISSCO Graphics had considered acquiring Breakthrough Software, whose software focus involved PC DOS, as a means of getting into the PC arena, but backed off when Computer Associates made an offer to acquire ISSCO. By early 1987 it was reported that "Issco users breathe sigh of relief" that all was well. The ISSCO User's Group was founded in 1976. ISSCO, which was founded in 1970 by Peter Preuss, was acquired by Computer Associates in 1986. == Notable products == === Tellagraf === ISSCO's Tellagraf is an early software package designed to allow end-users to "turn out full color, professional quality charts" with initial results displayed on a screen, modified as needed, and then "a final 'hard-copy' can be made .. or made into 35mm color transparencies for projection onto a screen." Users of Tellagraf often had access to CueChart and Disspla software. Often computer sites having one had all three. Terminals with varying degrees of graphics, such as the DEC's VT100 and Tektronix's Tektronix 4xxx family of text and graphics terminals. were supported, and the software ran on popular computing platforms. Four years are important to Tellagraf's early history: 1978: ease of use 1980: graphic-artist quality 1982: introduction of CueChart, and recognition by IEEE. 1983: "quality graphics enters the mainstream of data processing with ..." Tellegraf was eventually acquired by Computer Associates and renamed CA-Tellegraf. SAS users found it helpful. Universities, research institutes and financial services firms were among early users. === Disspla === Disspla is a package of data plotting subroutines that can be used from high level languages. It was also acquired by Computer Associates. === Tellaplan === In 1983 ISSCO introduced Tellaplan, "a project planning, report and schedule charting system for Tell-A- Graf users in IBM MVS or CMS or Digital Equipment Corp. VAX computers" atop which they built "two visual project management software packages" three years later.
Read more →
Blobotics

Blobotics is a term describing research into chemical-based computer processors based on ions rather than electrons. Andrew Adamatzky, a computer scientist at the University of the West of England, Bristol used the term in an article in New Scientist March 28, 2005 [1]. The aim is to create 'liquid logic gates' which would be 'infinitely reconfigurable and self-healing'. The process relies on the Belousov–Zhabotinsky reaction, a repeating cycle of three separate sets of reactions. Such a processor could form the basis of a robot which, using artificial sensors, interact with its surroundings in a way which mimics living creatures. The coining of the term was featured by ABC radio in Australia [2].
Read more →
OpenPipeline

openPipeline is an open-source plug-in for Autodesk Maya that is designed to assist in a Production Pipeline structure and Computer animation. == Development == Created in Maya Embedded Language, openPipeline was initiated at Eyebeam Atelier and further developed at Pratt Institute in the Digital Arts Lab. The initial release date was December 28, 2006. == Contributors == Rob O'Neill (Creator) Paris Mavroidis Meng-Han Ho
Read more →
Voice user interface

A voice user interface (VUI) enables spoken human interaction with computers, using speech recognition to understand spoken commands and answer questions, and typically text to speech to play a reply. A voice command device is a device controlled with a voice user interface. Voice user interfaces have been added to automobiles, home automation systems, computer operating systems, home appliances like washing machines and microwave ovens, and television remote controls. They are the primary way of interacting with virtual assistants on smartphones and smart speakers. Older automated attendants (which route phone calls to the correct extension) and interactive voice response systems (which conduct more complicated transactions over the phone) can respond to the pressing of keypad buttons via DTMF tones, but those with a full voice user interface allow callers to speak requests and responses without having to press any buttons. Newer voice command devices are speaker-independent, so they can respond to multiple voices, regardless of accent or dialectal influences. They are also capable of responding to several commands at once, separating vocal messages, and providing appropriate feedback, accurately imitating a natural conversation. == Overview == A VUI is the interface to any speech application. Only a short time ago, controlling a machine by simply talking to it was only possible in science fiction. Until recently, this area was considered to be artificial intelligence. However, advances in technologies like text-to-speech, speech-to-text, natural language processing, and cloud services contributed to the mass adoption of these types of interfaces. VUIs have become more commonplace, and people are taking advantage of the value that these hands-free, eyes-free interfaces provide in many situations. VUIs rely on the ability to process input reliably, inconsistent performance often leads to decreased user engagement and negative feedback. Designing a good VUI requires interdisciplinary talents of computer science, linguistics and human factors such as psychology. Even with advanced development tools, constructing an effective VUI requires understanding of both the tasks to be performed, as well as the target audience that will use the final system. The closer the VUI matches the user's mental model of the task, the easier it will be to use with little or no training, resulting in both higher efficiency and higher user satisfaction. A VUI designed for the general public should emphasize ease of use and provide a lot of help and guidance for first-time callers. In contrast, a VUI designed for a small group of power users (including field service workers), should focus more on productivity and less on help and guidance. Such applications should streamline the call flows, minimize prompts, eliminate unnecessary iterations and allow elaborate "mixed initiative dialogs", which enable callers to enter several pieces of information in a single utterance and in any order or combination. In short, speech applications have to be carefully crafted for the specific business process that is being automated. Not all business processes render themselves equally well for speech automation. In general, the more complex the inquiries and transactions are, the more challenging they will be to automate, and the more likely they will be to fail with the general public. In some scenarios, automation is simply not applicable, so live agent assistance is the only option. A legal advice hotline, for example, would be very difficult to automate. On the flip side, speech is perfect for handling quick and routine transactions, like changing the status of a work order, completing a time or expense entry, or transferring funds between accounts. == History == Early applications for VUI included voice-activated dialing of phones, either directly or through a (typically Bluetooth) headset or vehicle audio system. In 2007, a CNN business article reported that voice command was over a billion dollar industry and that companies like Google and Apple were trying to create speech recognition features. In the years since the article was published, the world has witnessed a variety of voice command devices. Additionally, Google has created a speech recognition engine called Pico TTS and Apple released Siri. Voice command devices are becoming more widely available, and innovative ways for using the human voice are always being created. For example, Business Week suggests that the future remote controller is going to be the human voice. Currently Xbox Live allows such features and Jobs hinted at such a feature on the new Apple TV. == Voice command software products on computing devices == Both Apple Mac and Windows PC provide built in speech recognition features for their latest operating systems. === Microsoft Windows === Two Microsoft operating systems, Windows 7 and Windows Vista, provide speech recognition capabilities. Microsoft integrated voice commands into their operating systems to provide a mechanism for people who want to limit their use of the mouse and keyboard, but still want to maintain or increase their overall productivity. ==== Windows Vista ==== With Windows Vista voice control, a user may dictate documents and emails in mainstream applications, start and switch between applications, control the operating system, format documents, save documents, edit files, efficiently correct errors, and fill out forms on the Web. The speech recognition software learns automatically every time a user uses it, and speech recognition is available in English (U.S.), English (U.K.), German (Germany), French (France), Spanish (Spain), Japanese, Chinese (Traditional), and Chinese (Simplified). In addition, the software comes with an interactive tutorial, which can be used to train both the user and the speech recognition engine. ==== Windows 7 ==== In addition to all the features provided in Windows Vista, Windows 7 provides a wizard for setting up the microphone and a tutorial on how to use the feature. ==== Mac OS X ==== All Mac OS X computers come pre-installed with the speech recognition software. The software is user-independent, and it allows for a user to, "navigate menus and enter keyboard shortcuts; speak checkbox names, radio button names, list items, and button names; and open, close, control, and switch among applications." However, the Apple website recommends a user buy a commercial product called Dictate. === Commercial products === If a user is not satisfied with the built in speech recognition software or a user does not have a built speech recognition software for their OS, then a user may experiment with a commercial product such as Braina Pro or DragonNaturallySpeaking for Windows PCs, and Dictate, the name of the same software for Mac OS. == Voice command mobile devices == Any mobile device running Android OS, Microsoft Windows Phone, iOS 9 or later, or Blackberry OS provides voice command capabilities. In addition to the built-in speech recognition software for each mobile phone's operating system, a user may download third party voice command applications from each operating system's application store: Apple App store, Google Play, Windows Phone Marketplace (initially Windows Marketplace for Mobile), or BlackBerry App World. === Android OS === Google has developed an open source operating system called Android, which allows a user to perform voice commands such as: send text messages, listen to music, get directions, call businesses, call contacts, send email, view a map, go to websites, write a note, and search Google. The speech recognition software is available for all devices since Android 2.2 "Froyo", but the settings must be set to English. Google allows for the user to change the language, and the user is prompted when he or she first uses the speech recognition feature if he or she would like their voice data to be attached to their Google account. If a user decides to opt into this service, it allows Google to train the software to the user's voice. Google introduced the Google Assistant with Android 7.0 "Nougat". It is much more advanced than the older version. Amazon.com has the Echo that uses Amazon's custom version of Android to provide a voice interface. === Microsoft Windows === Windows Phone is Microsoft's mobile device's operating system. On Windows Phone 7.5, the speech app is user independent and can be used to: call someone from your contact list, call any phone number, redial the last number, send a text message, call your voice mail, open an application, read appointments, query phone status, and search the web. In addition, speech can also be used during a phone call, and the following actions are possible during a phone call: press a number, turn the speaker phone on, or call someone, which puts the current call on hold. Windows 10 introduces Cortana, a voice control system that replaces the formerly used voice control on Windows
Read more →
Legendre moment

In mathematics, Legendre moments are a type of image moment and are achieved by using the Legendre polynomial. Legendre moments are used in areas of image processing including: pattern and object recognition, image indexing, line fitting, feature extraction, edge detection, and texture analysis. Legendre moments have been studied as a means to reduce image moment calculation complexity by limiting the amount of information redundancy through approximation. == Legendre moments == Source: With order of m + n, and object intensity function f(x,y): L m n = ( 2 m + 1 ) ( 2 n + 1 ) 4 ∫ − 1 1 ∫ − 1 1 P m ( x ) P n ( y ) f ( x , y ) d x d y {\displaystyle L_{mn}={\frac {(2m+1)(2n+1)}{4}}\int \limits _{-1}^{1}\int \limits _{-1}^{1}P_{m}(x)P_{n}(y)f(x,y)\,dx\,dy} where m,n = 1, 2, 3, ...∞ with the nth-order Legendre polynomials being: P n ( x ) = ∑ k = 0 n a k , n x k = ( − 1 ) n 2 n n ! ( d d x ) [ ( 1 − x 2 ) n ] {\displaystyle P_{n}(x)=\sum _{k=0}^{n}a_{k,n}x^{k}={\frac {(-1)^{n}}{2^{n}n!}}\left({\frac {d}{dx}}\right)[(1-x^{2})^{n}]} which can also be written: P n ( x ) = ∑ k = 0 D ( n ) ( − 1 ) k ( 2 n − 2 k ) ! 2 n k ! ( n − k ) ! ( n − 2 k ) ! x n − 2 k = ( 2 n ) ! 2 n ( n ! ) 2 x n − ( 2 n − 2 ) ! 2 n 1 ! ( n − 1 ) ! ( n − 2 ) ! x n − 2 + ⋯ {\displaystyle {\begin{aligned}P_{n}(x)&=\sum _{k=0}^{D(n)}(-1)^{k}{\frac {(2n-2k)!}{2^{n}k!(n-k)!(n-2k)!}}x^{n-2k}\\[5pt]&={\frac {(2n)!}{2^{n}(n!)^{2}}}x^{n}-{\frac {(2n-2)!}{2^{n}1!(n-1)!(n-2)!}}x^{n-2}+\cdots \end{aligned}}} where D(n) = floor(n/2). The set of Legendre polynomials {Pn(x)} form an orthogonal set on the interval [−1,1]: ∫ − 1 1 P n ( x ) P m ( x ) d x = 2 2 n + 1 δ n m {\displaystyle \int _{-1}^{1}P_{n}(x)P_{m}(x)\,dx={\frac {2}{2n+1}}\delta _{nm}} A recurrence relation can be used to compute the Legendre polynomial: ( n + 1 ) P n + 1 ( x ) − ( 2 n + 1 ) x P n ( x ) + n P n − 1 ( x ) = 0 {\displaystyle (n+1)P_{n+1}(x)-(2n+1)xP_{n}(x)+nP_{n-1}(x)=0} f(x,y) can be written as an infinite series expansion in terms of Legendre polynomials [−1 ≤ x,y ≤ 1.]: f ( x , y ) = ∑ m = 0 ∞ ∑ n = 0 ∞ λ m n P m ( x ) P n ( y ) {\displaystyle f(x,y)=\sum _{m=0}^{\infty }\sum _{n=0}^{\infty }\lambda _{mn}P_{m}(x)P_{n}(y)}
Read more →
Google Tasks

Google Tasks is a task management application developed by Google and included with Google Workspace. Included initially as a feature in Gmail and Google Calendar, Google Tasks launched as a core product with a standalone app in 2018. It is available for Android and iOS, as well as in the right-hand side panel on Google Workspace apps on the web and in Google Calendar. == History and development == Google Tasks began as an integration within other apps in G Suite (now Google Workspace), allowing to-do items to be created in Calendar and Gmail. Upon graduating to a core service on June 28, 2018, Google Tasks launched as a dedicated mobile app in which tasks can be sorted into lists, managed, and completed. Google Tasks launched the ability to create tasks from Google Chat messages in 2022.
Read more →
Irwin Sobel

Irwin Sobel (born September 12, 1940) is a scientist and researcher in digital image processing. == Biography == Irwin Sobel was born in New York City. He graduated from MIT in 1961 and completed his Ph.D. research at the Stanford Artificial Intelligence Project (SAIL) with thesis Camera Models and Machine Perception. His Ph.D. advisor was Jerome A. Feldman. Starting in 1973, he spent nine years doing postdoctoral research at Columbia University. After 1982, he worked as a Senior Researcher at HP Labs. == Sobel operator == In 1968, Sobel gave a talk entitled "An Isotropic 3x3 Image Gradient Operator" at SAIL; this method became known as the Sobel operator. It was developed jointly with a colleague, Gary Feldman, also at SAIL.
Read more →
Butler in a Box

Butler in a Box was an early voice-controlled home automation device developed in 1983 by magician Gus Searcy and programmer Franz Kavan. The device allowed users to control various home electronics, such as lights and phones, using voice commands. It predated modern smart speakers and virtual assistants by several decades. == History == The idea for the Butler in a Box originated in 1983 when Searcy was asked by friends why he couldn't simply command lights to turn on and off if he could pull rabbits out of hats, given his background as a professional magician. Searcy partnered with former IBM programmer Kavan to develop the device, with their first prototype being named "Sidney". The Butler in a Box combined remote control technology with voice recognition to enable control of home devices. However, it faced challenges due to the technological limitations of the era and its high price point of nearly $1,500 (equivalent to around $3,700 in 2021). == Features and functionality == Users could activate the Butler in a Box by speaking a wake word, typically a traditional butler name, and the device would address the user as "boss". It was capable of performing tasks such as: Turning lights on and off, controlling individual zones if lights were connected to remote control modules Making and receiving phone calls Setting timers Pairing with sensors to function as a security alarm system However, the device required extensive voice training for each user, a time-consuming process compared to modern voice recognition. Additionally, settings and trained commands would be lost if power was out for over 3 hours due to the volatile memory technology used at the time. == Reception and legacy == While innovative for its time, the Butler in a Box did not achieve widespread commercial success due to its high price and the technical limitations of the 1980s. Nevertheless, it served as an important early step in the development of home automation and showcased the potential for voice-controlled technology to enhance accessibility and convenience in the home. Decades later, products like Amazon Alexa, Google Home, and Apple's Siri would make voice-controlled smart home devices commonplace and affordable, building on the groundwork laid by early attempts like the Butler in a Box.
Read more →
Shape analysis (digital geometry)

This article describes shape analysis to analyze and process geometric shapes. == Description == Shape analysis is the (mostly) automatic analysis of geometric shapes, for example using a computer to detect similarly shaped objects in a database or parts that fit together. For a computer to automatically analyze and process geometric shapes, the objects have to be represented in a digital form. Most commonly a boundary representation is used to describe the object with its boundary (usually the outer shell, see also 3D model). However, other volume based representations (e.g. constructive solid geometry) or point based representations (point clouds) can be used to represent shape. Once the objects are given, either by modeling (computer-aided design), by scanning (3D scanner) or by extracting shape from 2D or 3D images, they have to be simplified before a comparison can be achieved. The simplified representation is often called a shape descriptor (or fingerprint, signature). These simplified representations try to carry most of the important information, while being easier to handle, to store and to compare than the shapes directly. A complete shape descriptor is a representation that can be used to completely reconstruct the original object (for example the medial axis transform). == Application fields == Shape analysis is used in many application fields: archeology for example, to find similar objects or missing parts architecture for example, to identify objects that spatially fit into a specific space medical imaging to understand shape changes related to illness or aid surgical planning virtual environments or on the 3D model market to identify objects for copyright purposes security applications such as face recognition entertainment industry (movies, games) to construct and process geometric models or animations computer-aided design and computer-aided manufacturing to process and to compare designs of mechanical parts or design objects. == Shape descriptors == Shape descriptors can be classified by their invariance with respect to the transformations allowed in the associated shape definition. Many descriptors are invariant with respect to congruency, meaning that congruent shapes (shapes that could be translated, rotated and mirrored) will have the same descriptor (for example moment or spherical harmonic based descriptors or Procrustes analysis operating on point clouds). Another class of shape descriptors (called intrinsic shape descriptors) is invariant with respect to isometry. These descriptors do not change with different isometric embeddings of the shape. Their advantage is that they can be applied nicely to deformable objects (e.g. a person in different body postures) as these deformations do not involve much stretching but are in fact near-isometric. Such descriptors are commonly based on geodesic distances measures along the surface of an object or on other isometry invariant characteristics such as the Laplace–Beltrami spectrum (see also spectral shape analysis). There are other shape descriptors, such as graph-based descriptors like the medial axis or the Reeb graph that capture geometric and/or topological information and simplify the shape representation but can not be as easily compared as descriptors that represent shape as a vector of numbers. From this discussion it becomes clear, that different shape descriptors target different aspects of shape and can be used for a specific application. Therefore, depending on the application, it is necessary to analyze how well a descriptor captures the features of interest.
Read more →
Robinson compass mask

In image processing, a Robinson compass mask is a type of compass mask used for edge detection. It has eight major compass orientations, each will extract the edges in respect to its direction. A combined use of compass masks of different directions could detect the edges from different angles. == Technical explanation == The Robinson compass mask is defined by taking a single mask and rotating it to form eight orientations: North: [ − 1 0 1 − 2 0 2 − 1 0 1 ] {\displaystyle {\text{North:}}{\begin{bmatrix}-1&0&1\\-2&0&2\\-1&0&1\end{bmatrix}}} North West: [ 0 1 2 − 1 0 1 − 2 − 1 0 ] {\displaystyle {\text{North West:}}{\begin{bmatrix}0&1&2\\-1&0&1\\-2&-1&0\end{bmatrix}}} West: [ 1 2 1 0 0 0 − 1 − 2 − 1 ] {\displaystyle {\text{West:}}{\begin{bmatrix}1&2&1\\0&0&0\\-1&-2&-1\end{bmatrix}}} South West: [ 2 1 0 1 0 − 1 0 − 1 − 2 ] {\displaystyle {\text{South West:}}{\begin{bmatrix}2&1&0\\1&0&-1\\0&-1&-2\end{bmatrix}}} South: [ 1 0 − 1 2 0 − 2 1 0 − 1 ] {\displaystyle {\text{South:}}{\begin{bmatrix}1&0&-1\\2&0&-2\\1&0&-1\end{bmatrix}}} South East: [ 0 − 1 − 2 1 0 − 1 2 1 0 ] {\displaystyle {\text{South East:}}{\begin{bmatrix}0&-1&-2\\1&0&-1\\2&1&0\end{bmatrix}}} East: [ − 1 − 2 − 1 0 0 0 1 2 1 ] {\displaystyle {\text{East:}}{\begin{bmatrix}-1&-2&-1\\0&0&0\\1&2&1\end{bmatrix}}} North East: [ − 2 − 1 0 − 1 0 1 0 1 2 ] {\displaystyle {\text{North East:}}{\begin{bmatrix}-2&-1&0\\-1&0&1\\0&1&2\end{bmatrix}}} The direction axis is the line of zeros in the matrix. Robinson compass mask is similar to kirsch compass masks, but is simpler to implement. Since the matrix coefficients only contains 0, 1, 2, and are symmetrical, only the results of four masks need to be calculated, the other four results are the negation of the first four results. An edge, or contour is an tiny area with neighboring distinct pixel values. The convolution of each mask with the image would create a high value output where there is a rapid change of pixel value, thus an edge point is found. All the detected edge points would line up as edges. == Example == An example of Robinson compass masks applied to the original image. Obviously, the edges in the direction of the mask is enhanced.
Read more →
Automatic meter reading

Automatic meter reading (AMR) is the technology of automatically collecting consumption, diagnostic, and status data from water meter or energy metering devices (gas, electric) and transferring that data to a central database for billing, troubleshooting, and analyzing. This technology mainly saves utility providers the expense of periodic trips to each physical location to read a meter. Another advantage is that billing can be based on near real-time consumption rather than on estimates based on past or predicted consumption. This timely information coupled with analysis can help both utility providers and customers better control the use and production of electric energy, gas usage, or water consumption. AMR technologies include handheld, mobile and network technologies based on telephony platforms (wired and wireless), radio frequency (RF), or powerline transmission. == Technologies == === Touch technology === With touch-based AMR, a meter reader carries a handheld computer or data collection device with a wand or probe. The device automatically collects the readings from a meter by touching or placing the read probe close to a reading coil enclosed in the touchpad. When a button is pressed, the probe sends an interrogate signal to the touch module to collect the meter reading. The software in the device matches the serial number to one in the route database, and saves the meter reading for later download to a billing or data collection computer. Since the meter reader still has to go to the site of the meter, this is sometimes referred to as "on-site" AMR. Another form of contact reader uses a standardized infrared port to transmit data. Protocols are standardized between manufacturers by such documents as ANSI C12.18 or IEC 61107. === AMR hosting === AMR hosting is a back-office solution which allows a user to track their electricity, water, or gas consumption over the Internet. All data is collected in near real-time, and is stored in a database by data acquisition software. The user can view the data via a web application, and can analyze the data using various online analysis tools such as charting load profiles, analyzing tariff components, and verify their utility bill. === Radio frequency network === Radio frequency based AMR can take many forms. The more common ones are handheld, mobile, satellite and fixed network solutions. There are both two-way RF systems and one-way RF systems in use that use both licensed and unlicensed RF bands. In a two-way or "wake up" system, a radio signal is normally sent to an AMR meter's unique serial number, instructing its transceiver to power-up and transmit its data. The meter transceiver and the reading transceiver both send and receive radio signals. In a one-way "bubble-up" or continuous broadcast type system, the meter transmits continuously and data is sent every few seconds. This means the reading device can be a receiver only, and the meter a transmitter only. Data travels only from the meter transmitter to the reading receiver. There are also hybrid systems that combine one-way and two-way techniques, using one-way communication for reading and two-way communication for programming functions. RF-based meter reading usually eliminates the need for the meter reader to enter the property or home, or to locate and open an underground meter pit. The utility saves money by increased speed of reading, has less liability from entering private property, and has fewer missed readings from being unable to access the meter. The technology based on RF is not readily accepted everywhere. In several Asian countries, the technology faces a barrier of regulations in place pertaining to use of the radio frequency of any radiated power. For example, in India the radio frequency which is generally in ISM band is not free to use even for low power radio of 10 mW. The majority of manufacturers of electricity meters have radio frequency devices in the frequency band of 433/868 MHz for large scale deployment in European countries. The frequency band of 2.4 GHz can be now used in India for outdoor as well as indoor applications, but few manufacturers have shown products within this frequency band. Initiatives in radio frequency AMR in such countries are being taken up with regulators wherever the cost of licensing outweighs the benefits of AMR. ==== Handheld ==== In handheld AMR, a meter reader carries a handheld computer with a built-in or attached receiver/transceiver (radio frequency or touch) to collect meter readings from an AMR capable meter. This is sometimes referred to as "walk-by" meter reading since the meter reader walks by the locations where meters are installed as they go through their meter reading route. Handheld computers may also be used to manually enter readings without the use of AMR technology as an alternate but this will not support exhaustive data which can be accurately read using the meter reading electronically. ==== Mobile ==== Mobile or "drive-by" meter reading is where a reading device is installed in a vehicle. The meter reader drives the vehicle while the reading device automatically collects the meter readings. Often, for mobile meter reading, the reading equipment includes navigational and mapping features provided by GPS and mapping software. With mobile meter reading, the reader does not normally have to read the meters in any particular route order, but just drives the service area until all meters are read. Components often consist of a laptop or proprietary computer, software, RF receiver/transceiver, and external vehicle antennas. ==== Satellite ==== Transmitters for data collection satellites can be installed in the field next to existing meters. The satellite AMR devices communicate with the meter for readings, and then sends those readings over a fixed or mobile satellite network. This network requires a clear view to the sky for the satellite transmitter/receiver, but eliminates the need to install fixed towers or send out field technicians, thereby being particularly suited for areas with low geographic meter density. ==== RF technologies commonly used for AMR ==== Narrow Band (single fixed radio frequency) Spread spectrum Direct-sequence spread spectrum (DSSS) Frequency-hopping spread spectrum (FHSS) There are also meters using AMR with RF technologies such as cellular phone data systems, Zigbee, Bluetooth, Wavenis and others. Some systems operate with U.S. Federal Communications Commission (FCC) licensed frequencies and others under FCC Part 15, which allows use of unlicensed radio frequencies. ==== Wi-Fi ==== WiSmart is a versatile platform which can be used by a variety of electrical home appliances in order to provide wireless TCP/IP communication using the 802.11 b/g protocol. Devices such as the Smart Thermostat permit a utility to lower a home's power consumption to help manage power demand. The city of Corpus Christi became one of the first cities in the United States to implement citywide Wi-Fi, which had been free until May 31, 2007, mainly to facilitate AMR after a meter reader was attacked by a dog. Today many meters are designed to transmit using Wi-Fi, even if a Wi-Fi network is not available, and they are read using a drive-by local Wi-Fi hand held receiver. The meters installed in Corpus Christi are not directly Wi-Fi enabled, but rather transmit narrow-band burst telemetry on the 460 MHz band. This narrow-band signal has much greater range than Wi-Fi, so the number of receivers required for the project are far fewer. Special receiver stations then decode the narrow-band signals and resend the data via Wi-Fi. Most of the automated utility meters installed in the Corpus Christi area are battery powered. Wi-Fi technology is unsuitable for long-term battery-powered operation. === Power line communication === PLC is a method where electronic data is transmitted over power lines back to the substation, then relayed to a central computer in the utility's main office. This would be considered a type of fixed network system—the network being the distribution network which the utility has built and maintains to deliver electric power. Such systems are primarily used for electric meter reading. Some providers have interfaced gas and water meters to feed into a PLC type system. == Brief history == In 1972, Theodore George "Ted" Paraskevakos, while working with Boeing in Huntsville, Alabama, developed a sensor monitoring system which used digital transmission for security, fire and medical alarm systems as well as meter reading capabilities for all utilities. This technology was a spin-off of the automatic telephone line identification system, now known as caller ID. In 1974, Paraskevakos was awarded a U.S. patent for this technology. In 1977, he launched Metretek, Inc., which developed and produced the first fully automated, commercially available remote meter reading and load management system. Since this system was developed pre-Internet, Metret
Read more →
Direct voice input

Direct voice input (DVI), sometimes called voice input control (VIC), is a style of human–machine interaction "HMI" in which the user makes voice commands to issue instructions to the machine through speech recognition. In the field of military aviation, DVI has been introduced into the cockpits of several modern military aircraft, such as the Eurofighter Typhoon, the Lockheed Martin F-35 Lightning II, the Dassault Rafale, the KF-21 Boramae and the Saab JAS 39 Gripen. Such systems have also been used for various other purposes, including industry control systems and speech recognition assistance for impaired individuals. == Overview == DVI systems can be divided into two major categories of functionality: "user-dependent" or "user-independent". A user-dependent system requires that a personal voice template to be generated for a specific person; the template for this individual has to be loaded onto their assigned machine prior to use of the DVI system for it to function properly. In contrast, a user-independent system does not require any personal voice template, being intended to respond correctly to the voice of any user. They can also be categorised between "discrete recognition" and "continuous recognition". Users of a discrete recognition system must pause between each word so that the DVI system can identify the separations between each word, while a continuous speech recognition system is capable of understanding a normal rate of speech. During the mid-2000s, researchers at the National Aerospace Laboratory in the Netherlands examined the use of DVI in the "GRACE" simulator; a total of twelve pilots participated in the ensuing experiment. The tests performed reportedly revealed that, while the hardware itself functioned well, several improvements were desirable prior to real-world deployment on aircraft since DVI operations actually consumed more time in comparison to traditional existing methods. Recommendations for improvements included the adoption of simpler syntax, the achievement of a greater recognition rate, and a decrease in response times; all of the issues encountered were determined to be of a technological nature, and were deemed feasible to resolve. The researchers concluded that in cockpits, especially during emergencies where pilots have to operate entirely on their own, a DVI system could be highly relevant, but that it was not of crucial importance during most other conceivable scenarios. Around the same time, evaluations of DVI systems for civil aviation purposes were conducted within the framework of Project SafeSound, coordinated by the European Union. It involved the observation of pilot workloads in real-world cockpits and contrasting them against pilot activity in flight simulators using both conventional systems and DVI assistance. The project aimed to enhance aviation safety and to decrease the workload in both ground and flight operations via the application of enhanced audio functions. == Applications == === Aviation === Prior to its widespread deployment, a handful of conventional military aircraft were converted to trial DVI systems; examples include the Harrier AV-8B and F-16 VISTA. In another case, a General Dynamics F-16 Fighting Falcon simulator was modified with DVI for a voice control study that was undertaken by the Royal Netherlands Air Force. DVI trials have also been conducted on helicopters, including the Boeing AH-64 Apache, showing the potential to improve flight safety and mission effectiveness. Numerous modern fighter aircraft have been outfitted with DVI systems, often in combination with various other man-machine interface schemes, such as HOTAS-compliant controls and other advanced control technologies. The combination of Voice and HOTAS control schemes has sometimes been referred to as the "V-TAS" concept. A prominent fighter aircraft to be furnished with a V-TAS cockpit is the Eurofighter Typhoon. The Lockheed Martin F-35 Lightning II also features a DVI system, which was developed by Adacel. Other examples includes the Dassault Rafale and the Saab JAS 39 Gripen. Numerous aircraft have been planned to use DVI. At one stage, the United States Air Force had sought to integrate DVI upon the Lockheed Martin F-22 Raptor; however, the technology was eventually judged to pose too many technical risks at that point in time, and thus such efforts were abandoned. === Personal === By 1990, working prototypes of speech recognition systems were being demonstrated; these were being promoted for the purpose of providing an effective man-machine interface for individuals with impaired speech. Techniques employed included time-encoded digital speech and automatic token set selection. Investigations of these early DVI systems reportedly included the use of automatic diagnostic routines and limited-scale trials using volunteers. During the 2010s, various companies were offering voice recognition systems to the general public in the form of personal digital assistants. One example is the Google Voice service, which allows users to pose questions via a DVI package installed on either a personal computer, tablet, or mobile phone. Numerous digital assistants have been developed, such as Amazon Echo, Siri, and Cortana, that use DVI to interact with users. === Commercial === DVI technology has enabled automated telephone systems to be widely deployed. Many companies commonly use centralised phone systems that route callers to the correct department via such methods. Various car manufacturers have also furnished their road vehicles with DVI systems; these typically allow drivers to control infotainment systems and interact with mobile phones with more convenience than legacy methods. During the late 1980s, investigations into the use of DVI systems for controlling CNC machines and other manufacturing apparatus were underway. During the 2010s, such systems were being used for logistics and warehouse management purposes.
Read more →
Elowan

Elowan is a plant-robot cyborg. Using its own internal bioelectrical signals, The plant has a robotic extension that makes it move towards light sources. Electrodes are inserted into the leaves, stem, and ground to detect the faint bioelectrical signals the plant produces. Then they are amplified so the robot can read them. So when the plant "wants" to go to light, the cyborg automatically goes to the nearest light source. Future extensions of the robot could provide: Protection, growth frameworks, and nutrients. Other factors that could make the cyborg move are temperature, soil, and gravity conditions Elowan is one in a series of plant-electronic hybrid experiments.
Read more →
Couch to 5K

Couch to 5K, abbreviated C25K, is an exercise plan that gradually progresses from beginner running toward a 5 kilometre (3.1 mile) run over nine weeks. == Operations == The Couch to 5K running plan, also known as C25K, created by Josh Clark in 1996, was developed with the expectation of creating a plan for new runners to start running. The plan is aimed to have users work out for 20 to 30 minutes, three days a week. Within the program, users can be expected to perform different tasks such as intervals of running with period of short walks in between to help build endurance in the weeks up to the final goal of a 5K run. During the nine weeks leading up to the race, the runner will learn to set their own pace and where their strengths and weaknesses are within running. Often, the daily workouts start with a five-minute warm-up walk and works up to running five kilometres without a walking break within nine weeks. Users are not expected to have any experience in running and can be some of the first running that they ever do. The main goal is to turn that unexperienced runner into someone who can run a 5K. Clark started the website Kick and featured C25K on the site. In 2001, Kick merged with Cool Running, a New England–based running site. Clark later sold his stake in Cool Running and the Couch to 5K program. Cool Running was absorbed into Active.com, operated by Active Network, LLC. Active Network provides mobile apps for Couch to 5K, as well as 5K to 10K, a follow-up program. The NHS in the UK provides downloadable podcasts and a smartphone app (Android and iOS) for the plan. A mobile app, created by Zen Labs, has training plans that are based on the Couch to 5K running plan from CoolRunning.com. It is one of the highest-rated health and fitness apps available on Android and iOS. As of 2016, the C25K app has been used by over 5 million people.
Read more →
BevQ

BevQ is a queue management mobile application developed by Faircode Technologies of Kochi, Kerala. It is provided by the Kerala State Beverages Corporation under Government of Kerala. == History == This app was released together by the Government of Kerala and the Kerala State Beverages Corporation in order to implement social distancing in the liquor stores Kerala in the case of the COVID-19 pandemic in Kerala and to reduce the congestion of people. The BevQ App was released by Faircode Technologies on 27 May 2020 on the Google Play Store. In January 2021, the app was withdrawn as bars had opened. In June 2021, there was a commitment from the Kerala CM that the App will be relaunched again. It has been reported that over 132,000 new users downloaded the app in the 48 hours after the announcement. == Achievements == The BEVQ app, which works only in the state of Kerala, beat all other Indian food and drink apps in 2020 to see the highest growth in year-on-year sessions, according to the State of Mobile 2021 report by App Annie. The app even beat the likes of Domino’s, which is used all across India. Around 300 government Liquor shops and 900 private liquor shops were enlisted in the platform. More than 200 million unique users registered in the platform. About 250,000 tokens were given out a day.
Read more →