AI Coding Neovim

AI Coding Neovim — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Feed forward (control)

  A feed forward (sometimes written feedforward) is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator. In control engineering, a feedforward control system is a control system that uses sensors to detect disturbances affecting the system and then applies an additional input to minimize the effect of the disturbance. This requires a mathematical model of the system so that the effect of disturbances can be properly predicted. A control system which has only feed-forward behavior responds to its control signal in a pre-defined way without responding to the way the system reacts; it is in contrast with a system that also has feedback, which adjusts the input to take account of how it affects the system, and how the system itself may vary unpredictably. In a feed-forward system, the control variable adjustment is not error-based. Instead it is based on knowledge about the process in the form of a mathematical model of the process and knowledge about, or measurements of, the process disturbances. Some prerequisites are needed for control scheme to be reliable by pure feed-forward without feedback: the external command or controlling signal must be available, and the effect of the output of the system on the load should be known (that usually means that the load must be predictably unchanging with time). Sometimes pure feed-forward control without feedback is called 'ballistic', because once a control signal has been sent, it cannot be further adjusted; any corrective adjustment must be by way of a new control signal. In contrast, 'cruise control' adjusts the output in response to the load that it encounters, by a feedback mechanism. These systems could relate to control theory, physiology, or computing. == Overview == With feed-forward or feedforward control, the disturbances are measured and accounted for before they have time to affect the system. In the house example, a feed-forward system may measure the fact that the door is opened and automatically turn on the heater before the house can get too cold. The difficulty with feed-forward control is that the effects of the disturbances on the system must be accurately predicted, and there must not be any unmeasured disturbances. For instance, if a window was opened that was not being measured, the feed-forward-controlled thermostat might let the house cool down. The term has specific meaning within the field of CPU-based automatic control. The discipline of feedforward control as it relates to modern, CPU based automatic controls is widely discussed, but is seldom practiced due to the difficulty and expense of developing or providing for the mathematical model required to facilitate this type of control. Open-loop control and feedback control, often based on canned PID control algorithms, are much more widely used. There are three types of control systems: open-loop, feed-forward, and feedback. An example of a pure open-loop control system is manual non-power-assisted steering of a motor car; the steering system does not have access to an auxiliary power source and does not respond to varying resistance to turning of the direction wheels; the driver must make that response without help from the steering system. In comparison, power steering has access to a controlled auxiliary power source, which depends on the engine speed. When the steering wheel is turned, a valve is opened which allows fluid under pressure to turn the wheels. A sensor monitors that pressure so that the valve only opens enough to cause the correct pressure to reach the wheel turning mechanism. This is feed-forward control where the output of the system, the change in direction of travel of the vehicle, plays no part in the system. See Model predictive control. If the driver is included in the system, then they do provide a feedback path by observing the direction of travel and compensating for errors by turning the steering wheel. In that case you have a feedback system, and the block labeled System in Figure(c) is a feed-forward system. In other words, systems of different types can be nested, and the overall system regarded as a black-box. Feedforward control is distinctly different from open-loop control and teleoperator systems. Feedforward control requires a mathematical model of the plant (process and/or machine being controlled) and the plant's relationship to any inputs or feedback the system might receive. Neither open-loop control nor teleoperator systems require the sophistication of a mathematical model of the physical system or plant being controlled. Control based on operator input without integral processing and interpretation through a mathematical model of the system is a teleoperator system and is not considered feedforward control. == History == Historically, the use of the term feedforward is found in works by Harold S. Black in US patent 1686792 (invented 17 March 1923) and D. M. MacKay as early as 1956. While MacKay's work is in the field of biological control theory, he speaks only of feedforward systems. MacKay does not mention feedforward control or allude to the discipline of feedforward controls. MacKay and other early writers who use the term feedforward are generally writing about theories of how human or animal brains work. Black also has US patent 2102671 invented 2 August 1927 on the technique of feedback applied to electronic systems. The discipline of feedforward controls was largely developed by professors and graduate students at Georgia Tech, MIT, Stanford and Carnegie Mellon. Feedforward is not typically hyphenated in scholarly publications. Meckl and Seering of MIT and Book and Dickerson of Georgia Tech began the development of the concepts of Feedforward Control in the mid-1970s. The discipline of Feedforward Controls was well defined in many scholarly papers, articles and books by the late 1980s. == Benefits == The benefits of feedforward control are significant and can often justify the extra cost, time and effort required to implement the technology. Control accuracy can often be improved by as much as an order of magnitude if the mathematical model is of sufficient quality and implementation of the feedforward control law is well thought out. Energy consumption by the feedforward control system and its driver is typically substantially lower than with other controls. Stability is enhanced such that the controlled device can be built of lower cost, lighter weight, springier materials while still being highly accurate and able to operate at high speeds. Other benefits of feedforward control include reduced wear and tear on equipment, lower maintenance costs, higher reliability and a substantial reduction in hysteresis. Feedforward control is often combined with feedback control to optimize performance. == Model == The mathematical model of the plant (machine, process or organism) used by the feedforward control system may be created and input by a control engineer or it may be learned by the control system. Control systems capable of learning and/or adapting their mathematical model have become more practical as microprocessor speeds have increased. The discipline of modern feedforward control was itself made possible by the invention of microprocessors. Feedforward control requires integration of the mathematical model into the control algorithm such that it is used to determine the control actions based on what is known about the state of the system being controlled. In the case of control for a lightweight, flexible robotic arm, this could be as simple as compensating between when the robot arm is carrying a payload and when it is not. The target joint angles are adjusted to place the payload in the desired position based on knowing the deflections in the arm from the mathematical model's interpretation of the disturbance caused by the payload. Systems that plan actions and then pass the plan to a different system for execution do not satisfy the above definition of feedforward control. Unless the system includes a means to detect a disturbance or receive an input and process that input through the mathematical model to determine the required modification to the control action, it is not true feedforward control. === Open system === In control theory, an open system is a feed forward system that does not have any feedback loop to control its output. In contrast, a closed system uses on a feedback loop to control the operation of the system. In an open system, the output of the system is not fed back into the input to the system for control or operation. == Applications == === Physiological feed-forward system === In physiology, feed-forward control is exemplified by the normal anticipatory regulation of heartbeat in advance of actual physical exertion by the central autonomic network. Feed-forward

  Read more →
• 

  Word2vec

  Word2vec is a technique in natural language processing for obtaining vector representations of words. These vectors capture information about the meaning of the word based on the surrounding words. The word2vec algorithm estimates these representations by modeling text in a large corpus. Once trained, such a model can detect synonymous words or suggest additional words for a partial sentence. Word2vec was developed by Tomáš Mikolov, Kai Chen, Greg Corrado, Ilya Sutskever and Jeff Dean at Google, and published in 2013. Word2vec represents a word as a high-dimension vector of numbers which capture relationships between words. In particular, words which appear in similar contexts are mapped to vectors which are nearby as measured by cosine similarity. This indicates the level of semantic similarity between the words, so for example the vectors for walk and ran are nearby, as are those for "but" and "however", and "Berlin" and "Germany". == Approach == Word2vec is a group of related models that are used to produce word embeddings. These models are shallow, two-layer neural networks that are trained to reconstruct linguistic contexts of words. Word2vec takes as its input a large corpus of text and produces a mapping of the set of words to a vector space, typically of several hundred dimensions, with each unique word in the corpus being assigned a vector in the space. Word2vec can use either of two model architectures to produce these distributed representations of words: continuous bag of words (CBOW) or continuously sliding skip-gram. In both architectures, word2vec considers both individual words and a sliding context window as it iterates over the corpus. The CBOW can be viewed as a 'fill in the blank' task, where the word embedding represents the way the word influences the relative probabilities of other words in the context window. Words which are semantically similar should influence these probabilities in similar ways, because semantically similar words should be used in similar contexts. The order of context words does not influence prediction (bag of words assumption). In the continuous skip-gram architecture, the model uses the current word to predict the surrounding window of context words. The skip-gram architecture weighs nearby context words more heavily than more distant context words. According to the authors' note, CBOW is faster while skip-gram does a better job for infrequent words. After the model is trained, the learned word embeddings are positioned in the vector space such that words that share common contexts in the corpus — that is, words that are semantically and syntactically similar — are located close to one another in the space. More dissimilar words are located farther from one another in the space. == Mathematical details == This section is based on expositions. A corpus is a sequence of words. Both CBOW and skip-gram are methods to learn one vector per word appearing in the corpus. Let V {\displaystyle V} ("vocabulary") be the set of all words appearing in the corpus C {\displaystyle C} . Our goal is to learn one vector v w ∈ R d {\displaystyle v_{w}\in \mathbb {R} ^{d}} for each word w ∈ V {\displaystyle w\in V} . The idea of skip-gram is that the vector of a word should be close to the vector of each of its neighbors. The idea of CBOW is that the vector-sum of a word's neighbors should be close to the vector of the word. === Continuous bag-of-words (CBOW) === The idea of CBOW is to represent each word with a vector, such that it is possible to predict a word using the sum of the vectors of its neighbors. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i + j : j ∈ N ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i+j}\colon j\in N)} where N {\displaystyle N} is a set of (non-zero) indices representing the relative locations of nearby words considered to be in w i {\displaystyle w_{i}} 's neighborhood. For example, if we want each word in the corpus to be predicted by every other word in a small span of 4 words. The set of relative indexes of neighbor words will be: N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} , and the objective is to maximize ∑ i ln ⁡ Pr ( w i ∣ w i − 2 , w i − 1 , w i + 1 , w i + 2 ) {\displaystyle \sum _{i}\ln \Pr(w_{i}\mid w_{i-2},w_{i-1},w_{i+1},w_{i+2})} . In standard bag-of-words, a word's context is represented by a word-count (aka a word histogram) of its neighboring words. For example, the "sat" in "the cat sat on the mat" is represented as {"the": 2, "cat": 1, "on": 1}. Note that the last word "mat" is not used to represent "sat", because it is outside the neighborhood N = { − 2 , − 1 , + 1 , + 2 } {\displaystyle N=\{-2,-1,+1,+2\}} . In continuous bag-of-words, the histogram is multiplied by a matrix V {\displaystyle V} to obtain a continuous representation of the word's context. The matrix V {\displaystyle V} is also called a dictionary. Its columns are the word vectors. It has D {\displaystyle D} columns, where D {\displaystyle D} is the size of the dictionary. Let d {\displaystyle d} be the length of each word vector. We have V ∈ R d × D {\displaystyle V\in \mathbb {R} ^{d\times D}} . For example, multiplying the word histogram {"the": 2, "cat": 1, "on": 1} with V {\displaystyle V} , we obtain 2 v the + v cat + v on {\displaystyle 2v_{\text{the}}+v_{\text{cat}}+v_{\text{on}}} . This is then multiplied with another matrix V ′ {\displaystyle V'} of shape R D × d {\displaystyle \mathbb {R} ^{D\times d}} . Each row of it is a word vector v ′ {\displaystyle v'} . This results in a vector of length D {\displaystyle D} , one entry per dictionary entry. Then, apply the softmax to obtain a probability distribution over the dictionary. This system can be visualized as a neural network, similar in spirit to an autoencoder, of architecture linear-linear-softmax, as depicted in the diagram. The system is trained by gradient descent to minimize the cross-entropy loss. In full formula, the cross-entropy loss is: − ∑ i ln ⁡ e v w i ′ ⋅ ( ∑ j ∈ N v w j + i ) ∑ w ′ e v w ′ ′ ⋅ ( ∑ j ∈ N v w j + i ) {\displaystyle -\sum _{i}\ln {\frac {e^{v_{w_{i}}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}{\sum _{w'}e^{v_{w'}'\cdot (\sum _{j\in N}v_{w_{j+i}})}}}} where the outer summation ∑ i {\displaystyle \sum _{i}} is over the words in a corpus, the quantity ∑ j ∈ N v w j + i {\displaystyle \sum _{j\in N}v_{w_{j+i}}} is the sum of a word's neighbors' vectors, etc. Once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. For example, the word "sat" can be represented as either the "sat"-th column of V {\displaystyle V} or the "sat"-th row of V ′ {\displaystyle V'} . It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. === Skip-gram === The idea of skip-gram is to represent each word with a vector, such that it is possible to predict the vectors of its neighbors using the vector of a word. The architecture is still linear-linear-softmax, the same as CBOW, but the input and the output are switched. Specifically, for each word w i {\displaystyle w_{i}} in the corpus, the one-hot encoding of the word is used as the input to the neural network. The output of the neural network is a probability distribution over the dictionary, representing a prediction of individual words in the neighborhood of w i {\displaystyle w_{i}} . The objective of training is to maximize ∑ i ∑ j ∈ N ln ⁡ Pr ( w j + i ∣ w i ) {\displaystyle \sum _{i}\sum _{j\in N}\ln \Pr(w_{j+i}\mid w_{i})} . In full formula, the loss function is − ∑ i ∑ j ∈ N ln ⁡ e v w j + i ′ ⋅ v w i ∑ w ′ e v w ′ ′ ⋅ v w i {\displaystyle -\sum _{i}\sum _{j\in N}\ln {\frac {e^{v_{w_{j+i}}'\cdot v_{w_{i}}}}{\sum _{w'}e^{v_{w'}'\cdot v_{w_{i}}}}}} Same as CBOW, once such a system is trained, we have two trained matrices V , V ′ {\displaystyle V,V'} . Either the column vectors of V {\displaystyle V} or the row vectors of V ′ {\displaystyle V'} can serve as the dictionary. It is also possible to simply define V ′ = V ⊤ {\displaystyle V'=V^{\top }} , in which case there would no longer be a choice. Essentially, skip-gram and CBOW are exactly the same in architecture. They only differ in the objective function during training. == History == During the 1980s, there were some early attempts at using neural networks to represent words and concepts as vectors. In 2010, Tomáš Mikolov (then at Brno University of Technology) with co-authors applied a simple recurrent neural network with a single hidden

  Read more →
• 

  Witness set

  In combinatorics and computational learning theory, a witness set is a set of elements that distinguishes a given Boolean function from a given class of other Boolean functions. Let C {\displaystyle C} be a concept class over a domain X {\displaystyle X} (that is, a family of Boolean functions over X {\displaystyle X} ) and c {\displaystyle c} be a concept in X {\displaystyle X} (a single Boolean function). A subset S {\displaystyle S} of X {\displaystyle X} is a witness set for c {\displaystyle c} in X {\displaystyle X} if S {\displaystyle S} distinguishes c {\displaystyle c} from all the other functions in C {\displaystyle C} , in the sense that no other function in C {\displaystyle C} has the same values on S {\displaystyle S} . For a concept class with | C | {\displaystyle |C|} concepts, there exists a concept that has a witness of size at most log 2 ⁡ | C | {\displaystyle \log _{2}|C|} ; this bound is tight when C {\displaystyle C} consists of all Boolean functions over X {\displaystyle X} . By a result of Bondy (1972) there exists a single witness set of size at most | C | − 1 {\displaystyle |C|-1} that is valid for all concepts in C {\displaystyle C} ; this bound is tight when C {\displaystyle C} consists of the indicator functions of the empty set and some singleton sets. One way to construct this set is to interpret the concepts as bitstrings, and the domain elements as positions in these bitstrings. Then the set of positions at which a trie of the bitstrings branches forms the desired witness set. This construction is central to the operation of the fusion tree data structure. The minimum size of a witness set for c {\displaystyle c} is called the witness size or specification number and is denoted by w C ( c ) {\displaystyle w_{C}(c)} . The value max { w C ( c ) : c ∈ C } {\displaystyle \max\{w_{C}(c):c\in C\}} is called the teaching dimension of C {\displaystyle C} . It represents the number of examples of a concept that need to be presented by a teacher to a learner, in the worst case, to enable the learner to determine which concept is being presented. Witness sets have also been called teaching sets, keys, specifying sets, or discriminants. The "witness set" terminology is from Kushilevitz et al. (1996), who trace the concept of witness sets to work by Cover (1965).

  Read more →
• 

  Error tolerance (PAC learning)

  In PAC learning, error tolerance refers to the ability of an algorithm to learn when the examples received have been corrupted in some way. In fact, this is a very common and important issue since in many applications it is not possible to access noise-free data. Noise can interfere with the learning process at different levels: the algorithm may receive data that have been occasionally mislabeled, or the inputs may have some false information, or the classification of the examples may have been maliciously adulterated. == Notation and the Valiant learning model == In the following, let X {\displaystyle X} be our n {\displaystyle n} -dimensional input space. Let H {\displaystyle {\mathcal {H}}} be a class of functions that we wish to use in order to learn a { 0 , 1 } {\displaystyle \{0,1\}} -valued target function f {\displaystyle f} defined over X {\displaystyle X} . Let D {\displaystyle {\mathcal {D}}} be the distribution of the inputs over X {\displaystyle X} . The goal of a learning algorithm A {\displaystyle {\mathcal {A}}} is to choose the best function h ∈ H {\displaystyle h\in {\mathcal {H}}} such that it minimizes e r r o r ( h ) = P x ∼ D ( h ( x ) ≠ f ( x ) ) {\displaystyle error(h)=P_{x\sim {\mathcal {D}}}(h(x)\neq f(x))} . Let us suppose we have a function s i z e ( f ) {\displaystyle size(f)} that can measure the complexity of f {\displaystyle f} . Let Oracle ( x ) {\displaystyle {\text{Oracle}}(x)} be an oracle that, whenever called, returns an example x {\displaystyle x} and its correct label f ( x ) {\displaystyle f(x)} . When no noise corrupts the data, we can define learning in the Valiant setting: Definition: We say that f {\displaystyle f} is efficiently learnable using H {\displaystyle {\mathcal {H}}} in the Valiant setting if there exists a learning algorithm A {\displaystyle {\mathcal {A}}} that has access to Oracle ( x ) {\displaystyle {\text{Oracle}}(x)} and a polynomial p ( ⋅ , ⋅ , ⋅ , ⋅ ) {\displaystyle p(\cdot ,\cdot ,\cdot ,\cdot )} such that for any 0 < ε ≤ 1 {\displaystyle 0<\varepsilon \leq 1} and 0 < δ ≤ 1 {\displaystyle 0<\delta \leq 1} it outputs, in a number of calls to the oracle bounded by p ( 1 ε , 1 δ , n , size ( f ) ) {\displaystyle p\left({\frac {1}{\varepsilon }},{\frac {1}{\delta }},n,{\text{size}}(f)\right)} , a function h ∈ H {\displaystyle h\in {\mathcal {H}}} that satisfies with probability at least 1 − δ {\displaystyle 1-\delta } the condition error ( h ) ≤ ε {\displaystyle {\text{error}}(h)\leq \varepsilon } . In the following we will define learnability of f {\displaystyle f} when data have suffered some modification. == Classification noise == In the classification noise model a noise rate 0 ≤ η < 1 2 {\displaystyle 0\leq \eta <{\frac {1}{2}}} is introduced. Then, instead of Oracle ( x ) {\displaystyle {\text{Oracle}}(x)} that returns always the correct label of example x {\displaystyle x} , algorithm A {\displaystyle {\mathcal {A}}} can only call a faulty oracle Oracle ( x , η ) {\displaystyle {\text{Oracle}}(x,\eta )} that will flip the label of x {\displaystyle x} with probability η {\displaystyle \eta } . As in the Valiant case, the goal of a learning algorithm A {\displaystyle {\mathcal {A}}} is to choose the best function h ∈ H {\displaystyle h\in {\mathcal {H}}} such that it minimizes e r r o r ( h ) = P x ∼ D ( h ( x ) ≠ f ( x ) ) {\displaystyle error(h)=P_{x\sim {\mathcal {D}}}(h(x)\neq f(x))} . In applications it is difficult to have access to the real value of η {\displaystyle \eta } , but we assume we have access to its upperbound η B {\displaystyle \eta _{B}} . Note that if we allow the noise rate to be 1 / 2 {\displaystyle 1/2} , then learning becomes impossible in any amount of computation time, because every label conveys no information about the target function. Definition: We say that f {\displaystyle f} is efficiently learnable using H {\displaystyle {\mathcal {H}}} in the classification noise model if there exists a learning algorithm A {\displaystyle {\mathcal {A}}} that has access to Oracle ( x , η ) {\displaystyle {\text{Oracle}}(x,\eta )} and a polynomial p ( ⋅ , ⋅ , ⋅ , ⋅ ) {\displaystyle p(\cdot ,\cdot ,\cdot ,\cdot )} such that for any 0 ≤ η ≤ 1 2 {\displaystyle 0\leq \eta \leq {\frac {1}{2}}} , 0 ≤ ε ≤ 1 {\displaystyle 0\leq \varepsilon \leq 1} and 0 ≤ δ ≤ 1 {\displaystyle 0\leq \delta \leq 1} it outputs, in a number of calls to the oracle bounded by p ( 1 1 − 2 η B , 1 ε , 1 δ , n , s i z e ( f ) ) {\displaystyle p\left({\frac {1}{1-2\eta _{B}}},{\frac {1}{\varepsilon }},{\frac {1}{\delta }},n,size(f)\right)} , a function h ∈ H {\displaystyle h\in {\mathcal {H}}} that satisfies with probability at least 1 − δ {\displaystyle 1-\delta } the condition e r r o r ( h ) ≤ ε {\displaystyle error(h)\leq \varepsilon } . == Statistical query learning == Statistical Query Learning is a kind of active learning problem in which the learning algorithm A {\displaystyle {\mathcal {A}}} can decide if to request information about the likelihood P f ( x ) {\displaystyle P_{f(x)}} that a function f {\displaystyle f} correctly labels example x {\displaystyle x} , and receives an answer accurate within a tolerance α {\displaystyle \alpha } . Formally, whenever the learning algorithm A {\displaystyle {\mathcal {A}}} calls the oracle Oracle ( x , α ) {\displaystyle {\text{Oracle}}(x,\alpha )} , it receives as feedback probability Q f ( x ) {\displaystyle Q_{f(x)}} , such that Q f ( x ) − α ≤ P f ( x ) ≤ Q f ( x ) + α {\displaystyle Q_{f(x)}-\alpha \leq P_{f(x)}\leq Q_{f(x)}+\alpha } . Definition: We say that f {\displaystyle f} is efficiently learnable using H {\displaystyle {\mathcal {H}}} in the statistical query learning model if there exists a learning algorithm A {\displaystyle {\mathcal {A}}} that has access to Oracle ( x , α ) {\displaystyle {\text{Oracle}}(x,\alpha )} and polynomials p ( ⋅ , ⋅ , ⋅ ) {\displaystyle p(\cdot ,\cdot ,\cdot )} , q ( ⋅ , ⋅ , ⋅ ) {\displaystyle q(\cdot ,\cdot ,\cdot )} , and r ( ⋅ , ⋅ , ⋅ ) {\displaystyle r(\cdot ,\cdot ,\cdot )} such that for any 0 < ε ≤ 1 {\displaystyle 0<\varepsilon \leq 1} the following hold: Oracle ( x , α ) {\displaystyle {\text{Oracle}}(x,\alpha )} can evaluate P f ( x ) {\displaystyle P_{f(x)}} in time q ( 1 ε , n , s i z e ( f ) ) {\displaystyle q\left({\frac {1}{\varepsilon }},n,size(f)\right)} ; 1 α {\displaystyle {\frac {1}{\alpha }}} is bounded by r ( 1 ε , n , s i z e ( f ) ) {\displaystyle r\left({\frac {1}{\varepsilon }},n,size(f)\right)} A {\displaystyle {\mathcal {A}}} outputs a model h {\displaystyle h} such that e r r ( h ) < ε {\displaystyle err(h)<\varepsilon } , in a number of calls to the oracle bounded by p ( 1 ε , n , s i z e ( f ) ) {\displaystyle p\left({\frac {1}{\varepsilon }},n,size(f)\right)} . Note that the confidence parameter δ {\displaystyle \delta } does not appear in the definition of learning. This is because the main purpose of δ {\displaystyle \delta } is to allow the learning algorithm a small probability of failure due to an unrepresentative sample. Since now Oracle ( x , α ) {\displaystyle {\text{Oracle}}(x,\alpha )} always guarantees to meet the approximation criterion Q f ( x ) − α ≤ P f ( x ) ≤ Q f ( x ) + α {\displaystyle Q_{f(x)}-\alpha \leq P_{f(x)}\leq Q_{f(x)}+\alpha } , the failure probability is no longer needed. The statistical query model is strictly weaker than the PAC model: any efficiently SQ-learnable class is efficiently PAC learnable in the presence of classification noise, but there exist efficient PAC-learnable problems such as parity that are not efficiently SQ-learnable. == Malicious classification == In the malicious classification model an adversary generates errors to foil the learning algorithm. This setting describes situations of error burst, which may occur when for a limited time transmission equipment malfunctions repeatedly. Formally, algorithm A {\displaystyle {\mathcal {A}}} calls an oracle Oracle ( x , β ) {\displaystyle {\text{Oracle}}(x,\beta )} that returns a correctly labeled example x {\displaystyle x} drawn, as usual, from distribution D {\displaystyle {\mathcal {D}}} over the input space with probability 1 − β {\displaystyle 1-\beta } , but it returns with probability β {\displaystyle \beta } an example drawn from a distribution that is not related to D {\displaystyle {\mathcal {D}}} . Moreover, this maliciously chosen example may strategically selected by an adversary who has knowledge of f {\displaystyle f} , β {\displaystyle \beta } , D {\displaystyle {\mathcal {D}}} , or the current progress of the learning algorithm. Definition: Given a bound β B < 1 2 {\displaystyle \beta _{B}<{\frac {1}{2}}} for 0 ≤ β < 1 2 {\displaystyle 0\leq \beta <{\frac {1}{2}}} , we say that f {\displaystyle f} is efficiently learnable using H {\displaystyle {\mathcal {H}}} in the malicious classification model, if there exist a learning algorithm A {\displaystyle {\mathcal {A}}} that has access to Oracle ( x , β ) {\displaystyle {\text{Oracle}}(x,\beta )}

  Read more →
• 

  Genigraphics

  Genigraphics is a large-format printing service bureau specializing in providing poster session services to medical and scientific conferences throughout the US and Canada. The company began in 1973 as a division of General Electric. == History == Genigraphics began as a computer graphics system, developed by General Electric in the late 1960s, for NASA to use in space flight simulation. The technologies thus developed provided a foundation for the company's expansion into the commercial market. The Computed Images System & Services division (CISS, to become Genigraphics Corporation) of GE delivered the first presentation graphics system to Amoco Oil's corporate headquarters in 1973. It was named the 100 Series, and was based on DEC's PDP 11 series of mini computer systems. The first Genigraphics systems (100 Series and 100A Series) used an array of buttons, dials, knobs and joysticks, along with a built in keyboard, as the means of user interface. The PDP-11/40 computer was housed in a tall cabinet and used random access magnetic tape drives (DECtape) for storing completed presentations. The graphics generator (Forox recorder) was capable of outputting 2,000 line resolution, suitable for 35mm and 72mm film and large sheet film positive using larger cassettes for recording. 4000 and 8000 line resolution was later achieved with duplex scanning and 4x scanning by modifying to the Forox recorder's settings menu. Subsequent models (100B,C,D,D+ and D+/GVP) replaced the knobs and dials with an on screen, text based menu system, a graphics tablet and a pen. The pen/tablet combination gave way to a mouse like device in later models, and served to provide the interface with the graphics tools. User interaction with the computer for functions such as media initialization or modem to modem data transfer required a DECwriter serial terminal. In 1982, GE divested the Genigraphics division along with a host of other "non essential" business units (Genitext, Geniponics) and Genigraphics Corporation was born. Shortly after the divestiture, the headquarters of Genigraphics was moved from Liverpool, New York to Saddle Brook, New Jersey. Major success followed as the company grew exponentially over the next few years selling both systems and slide creation services. Genigraphics film recorders produced high-resolution digital images on 35mm film. The computer-generated scenes for The Last Starfighter were calculated on a Cray X-MP supercomputer and mastered with a Genigraphics film recorder. At its peak, Genigraphics Corporation employed roughly 300 people in 24 offices worldwide, with revenues upwards of $70 million annually. By the late 1980s Genigraphics saw demand for its proprietary systems dwindle and began selling the MASTERPIECE 8770 film recorder and GRAFTIME software as a peripheral for DEC Vaxes, IBM PC AT’s, and Mac NuBus machines. But the MASTERPIECE film recorder proved too expensive to sell in volume. In 1988, the company began a partnership with Microsoft to help develop the PowerPoint software. In exchange, every copy of PowerPoint included a “Send to Genigraphics” link to have files sent to a Genigraphics service bureau to be produced as 35mm slides. This partnership continued until 2001. In 1989, after three years of flat revenue, Genigraphics sold its hardware business in order to focus on its service bureau business and partnership with Microsoft via PowerPoint. In 1994, all assets of Genigraphics, including equipment, software development, in-house artwork, trademarks, and rights to the Microsoft partnership, were sold to InFocus Corporation of Wilsonville, Oregon who continued to operate under the Genigraphics brand name. The twenty-four service bureaus were consolidated to a 20,000 square foot facility next to the FedEx hub in Memphis, Tennessee. This allowed PowerPoint slide orders to be received until 10pm and delivered across the United States by the following morning. In 1995, InFocus registered www.genigraphics.com and was among the first to offer a form of ecommerce allowing 35mm slides, color prints and transparencies, printed booklets, and digital projectors to be purchased online. In 1998, then current management bought Genigraphics from InFocus and have operated it continuously ever since as Genigraphics LLC. That same year, InFocus projector rentals were added to the “Send to Genigraphics” link in PowerPoint and Genigraphics became the rental and repair center for all InFocus national accounts. It also marked Genigraphics entry into the new industry of large format printing; leveraging their knowledge of, and access to, PowerPoint programming code to develop a proprietary printer driver to output directly to an Epson 9500 wide format printer. At the time, Genigraphics was the exclusive 35mm slide vendor for all Kinko’s stores in the United States and poster printing was added to the arrangement. In 2003, Genigraphics closed their 35mm slide E6 photo lab – one of the last high-volume commercial E6 labs in the US – and expanded their large format printing capabilities. Since 2003, Genigraphics has become a major player in the poster session market, providing printing and on-site services to medical and scientific conferences throughout the US and Canada. As of February 2019, over 150,000 medical or scientific ‘ePosters’ are made available through their ResearchPosters.com archive service. === Partnership with Microsoft and development of PowerPoint === As presentations began to be created on personal computers in the late 80’s, Genigraphics sought presentation software partners in Silicon Valley who would be interested in sending files to Genigraphics via dial-up modem to be produced on 35mm slides. In 1987, Michael Beetner, Director of Marketing Planning for Genigraphics, met with Robert Gaskins, head of Microsoft's Graphics Business Unit, who was leading the development of the newly released PowerPoint software. A joint development agreement between Microsoft and Genigraphics was agreed upon and announced at Mac World 1988. According to Erica Robles-Anderson and Patrik Svensson, "It would be hard to overestimate Genigraphics’ influence on PowerPoint. PowerPoint 2.0 was designed for Genigraphics film recorders. It shipped with Genigraphics color palettes, schemes, and the distinctively Genigraphics color-gradient backgrounds. The application contained a ‘Send to Genigraphics’ menu item that wrote the presentation to floppy disk or transmitted the order directly via modem. Within three and a half months PowerPoint orders accounted for ten percent of revenue at Genigraphics service centers. PowerPoint 3.0 was even more intimately dependent upon Genigraphics. The software incorporated a collection of clip art images and symbols that had been produced by hundreds of artists at dozens of service centers across tens of thousands of presentations. Genigraphics artists designed PowerPoint 3.0 colors, templates, and sample presentations. The software even used Genigraphics (rather than Excel) chart style. Bar charts were rendered two-dimensionally with apparent thickness added to make them seemingly recede from the axes. The technique made it easier for viewers to compare bar heights and estimate values from axis ticks and labels. Pie charts were handled analogously. Microsoft paid Genigraphics to produce more than 500 clip art drawings and symbols used in Microsoft programs.” In exchange for Genigraphics development efforts, Microsoft included a “Send to Genigraphics” link in every copy of PowerPoint through the 10.0 version (2000/2001). The arrangement came to an end when Microsoft restructured as a result of anti-trust lawsuits.

  Read more →
• 

  Medoid

  Medoids are representative objects of a data set or a cluster within a data set whose sum of dissimilarities to all the objects in the cluster is minimal. Medoids are similar in concept to means or centroids, but medoids are always restricted to be members of the data set. Medoids are most commonly used on data when a mean or centroid cannot be defined, such as graphs. They are also used in contexts where the centroid is not representative of the dataset like in images, 3-D trajectories and gene expression (where while the data is sparse the medoid need not be). These are also of interest while wanting to find a representative using some distance other than squared euclidean distance (for instance in movie-ratings). For some data sets there may be more than one medoid, as with medians. A common application of the medoid is the k-medoids clustering algorithm, which is similar to the k-means algorithm but works when a mean or centroid is not definable. This algorithm basically works as follows. First, a set of medoids is chosen at random. Second, the distances to the other points are computed. Third, data are clustered according to the medoid they are most similar to. Fourth, the medoid set is optimized via an iterative process. Note that a medoid is not equivalent to a median, a geometric median, or centroid. A median is only defined on 1-dimensional data, and it only minimizes dissimilarity to other points for metrics induced by a norm (such as the Manhattan distance or Euclidean distance). A geometric median is defined in any dimension, but unlike a medoid, it is not necessarily a point from within the original dataset. == Definition == Let X := { x 1 , x 2 , … , x n } {\textstyle {\mathcal {X}}:=\{x_{1},x_{2},\dots ,x_{n}\}} be a set of n {\textstyle n} points in a space with a distance function d. Medoid is defined as x medoid = arg ⁡ min y ∈ X ∑ i = 1 n d ( y , x i ) . {\displaystyle x_{\text{medoid}}=\arg \min _{y\in {\mathcal {X}}}\sum _{i=1}^{n}d(y,x_{i}).} == Clustering with medoids == Medoids are a popular replacement for the cluster mean when the distance function is not (squared) Euclidean distance, or not even a metric (as the medoid does not require the triangle inequality). When partitioning the data set into clusters, the medoid of each cluster can be used as a representative of each cluster. Clustering algorithms based on the idea of medoids include: Partitioning Around Medoids (PAM), the standard k-medoids algorithm Hierarchical Clustering Around Medoids (HACAM), which uses medoids in hierarchical clustering == Algorithms to compute the medoid of a set == From the definition above, it is clear that the medoid of a set X {\displaystyle {\mathcal {X}}} can be computed after computing all pairwise distances between points in the ensemble. This would take O ( n 2 ) {\textstyle O(n^{2})} distance evaluations (with n = | X | {\displaystyle n=|{\mathcal {X}}|} ). In the worst case, one can not compute the medoid with fewer distance evaluations. However, there are many approaches that allow us to compute medoids either exactly or approximately in sub-quadratic time under different statistical models. If the points lie on the real line, computing the medoid reduces to computing the median which can be done in O ( n ) {\textstyle O(n)} by Quick-select algorithm of Hoare. However, in higher dimensional real spaces, no linear-time algorithm is known. RAND is an algorithm that estimates the average distance of each point to all the other points by sampling a random subset of other points. It takes a total of O ( n log ⁡ n ϵ 2 ) {\textstyle O\left({\frac {n\log n}{\epsilon ^{2}}}\right)} distance computations to approximate the medoid within a factor of ( 1 + ϵ Δ ) {\textstyle (1+\epsilon \Delta )} with high probability, where Δ {\textstyle \Delta } is the maximum distance between two points in the ensemble. Note that RAND is an approximation algorithm, and moreover Δ {\textstyle \Delta } may not be known apriori. RAND was leveraged by TOPRANK which uses the estimates obtained by RAND to focus on a small subset of candidate points, evaluates the average distance of these points exactly, and picks the minimum of those. TOPRANK needs O ( n 5 3 log 4 3 ⁡ n ) {\textstyle O(n^{\frac {5}{3}}\log ^{\frac {4}{3}}n)} distance computations to find the exact medoid with high probability under a distributional assumption on the average distances. trimed presents an algorithm to find the medoid with O ( n 3 2 2 Θ ( d ) ) {\textstyle O(n^{\frac {3}{2}}2^{\Theta (d)})} distance evaluations under a distributional assumption on the points. The algorithm uses the triangle inequality to cut down the search space. Meddit leverages a connection of the medoid computation with multi-armed bandits and uses an upper-Confidence-bound type of algorithm to get an algorithm which takes O ( n log ⁡ n ) {\textstyle O(n\log n)} distance evaluations under statistical assumptions on the points. Correlated Sequential Halving also leverages multi-armed bandit techniques, improving upon Meddit. By exploiting the correlation structure in the problem, the algorithm is able to provably yield drastic improvement (usually around 1-2 orders of magnitude) in both number of distance computations needed and wall clock time. == Implementations == An implementation of RAND, TOPRANK, and trimed can be found here. An implementation of Meddit can be found here and here. An implementation of Correlated Sequential Halving can be found here. == Medoids in text and natural language processing (NLP) == Medoids can be applied to various text and NLP tasks to improve the efficiency and accuracy of analyses. By clustering text data based on similarity, medoids can help identify representative examples within the dataset, leading to better understanding and interpretation of the data. === Text clustering === Text clustering is the process of grouping similar text or documents together based on their content. Medoid-based clustering algorithms can be employed to partition large amounts of text into clusters, with each cluster represented by a medoid document. This technique helps in organizing, summarizing, and retrieving information from large collections of documents, such as in search engines, social media analytics and recommendation systems. === Text summarization === Text summarization aims to produce a concise and coherent summary of a larger text by extracting the most important and relevant information. Medoid-based clustering can be used to identify the most representative sentences in a document or a group of documents, which can then be combined to create a summary. This approach is especially useful for extractive summarization tasks, where the goal is to generate a summary by selecting the most relevant sentences from the original text. === Sentiment analysis === Sentiment analysis involves determining the sentiment or emotion expressed in a piece of text, such as positive, negative, or neutral. Medoid-based clustering can be applied to group text data based on similar sentiment patterns. By analyzing the medoid of each cluster, researchers can gain insights into the predominant sentiment of the cluster, helping in tasks such as opinion mining, customer feedback analysis, and social media monitoring. === Topic modeling === Topic modeling is a technique used to discover abstract topics that occur in a collection of documents. Medoid-based clustering can be applied to group documents with similar themes or topics. By analyzing the medoids of these clusters, researchers can gain an understanding of the underlying topics in the text corpus, facilitating tasks such as document categorization, trend analysis, and content recommendation. === Techniques for measuring text similarity in medoid-based clustering === When applying medoid-based clustering to text data, it is essential to choose an appropriate similarity measure to compare documents effectively. Each technique has its advantages and limitations, and the choice of the similarity measure should be based on the specific requirements and characteristics of the text data being analyzed. The following are common techniques for measuring text similarity in medoid-based clustering: ==== Cosine similarity ==== Cosine similarity is a widely used measure to compare the similarity between two pieces of text. It calculates the cosine of the angle between two document vectors in a high-dimensional space. Cosine similarity ranges between -1 and 1, where a value closer to 1 indicates higher similarity, and a value closer to -1 indicates lower similarity. By visualizing two lines originating from the origin and extending to the respective points of interest, and then measuring the angle between these lines, one can determine the similarity between the associated points. Cosine similarity is less affected by document length, so it may be better at producing medoids that are representative of the content of a cluster instead of the lengt

  Read more →
• 

  Junction tree algorithm

  The junction tree algorithm (also known as 'Clique Tree') is a method used in machine learning to extract marginalization in general graphs. In essence, it entails performing belief propagation on a modified graph called a junction tree. The graph is called a tree because it branches into different sections of data; nodes of variables are the branches. The basic premise is to eliminate cycles by clustering them into single nodes. Multiple extensive classes of queries can be compiled at the same time into larger structures of data. There are different algorithms to meet specific needs and for what needs to be calculated. Inference algorithms gather new developments in the data and calculate it based on the new information provided. == Junction tree algorithm == === Hugin algorithm === If the graph is directed then moralize it to make it un-directed. Introduce the evidence. Triangulate the graph to make it chordal. Construct a junction tree from the triangulated graph (we will call the vertices of the junction tree "supernodes"). Propagate the probabilities along the junction tree (via belief propagation) Note that this last step is inefficient for graphs of large treewidth. Computing the messages to pass between supernodes involves doing exact marginalization over the variables in both supernodes. Performing this algorithm for a graph with treewidth k will thus have at least one computation which takes time exponential in k. It is a message passing algorithm. The Hugin algorithm takes fewer computations to find a solution compared to Shafer-Shenoy. === Shafer-Shenoy algorithm === Computed recursively Multiple recursions of the Shafer-Shenoy algorithm results in Hugin algorithm Found by the message passing equation Separator potentials are not stored The Shafer-Shenoy algorithm is the sum product of a junction tree. It is used because it runs programs and queries more efficiently than the Hugin algorithm. The algorithm makes calculations for conditionals for belief functions possible. Joint distributions are needed to make local computations happen. === Underlying theory === The first step concerns only Bayesian networks, and is a procedure to turn a directed graph into an undirected one. We do this because it allows for the universal applicability of the algorithm, regardless of direction. The second step is setting variables to their observed value. This is usually needed when we want to calculate conditional probabilities, so we fix the value of the random variables we condition on. Those variables are also said to be clamped to their particular value. The third step is to ensure that graphs are made chordal if they aren't already chordal. This is the first essential step of the algorithm. It makes use of the following theorem: Theorem: For an undirected graph, G, the following properties are equivalent: Graph G is triangulated. The clique graph of G has a junction tree. There is an elimination ordering for G that does not lead to any added edges. Thus, by triangulating a graph, we make sure that the corresponding junction tree exists. A usual way to do this, is to decide an elimination order for its nodes, and then run the Variable elimination algorithm. The variable elimination algorithm states that the algorithm must be run each time there is a different query. This will result to adding more edges to the initial graph, in such a way that the output will be a chordal graph. All chordal graphs have a junction tree. The next step is to construct the junction tree. To do so, we use the graph from the previous step, and form its corresponding clique graph. Now the next theorem gives us a way to find a junction tree: Theorem: Given a triangulated graph, weight the edges of the clique graph by their cardinality, |A∩B|, of the intersection of the adjacent cliques A and B. Then any maximum-weight spanning tree of the clique graph is a junction tree. So, to construct a junction tree we just have to extract a maximum weight spanning tree out of the clique graph. This can be efficiently done by, for example, modifying Kruskal's algorithm. The last step is to apply belief propagation to the obtained junction tree. Usage: A junction tree graph is used to visualize the probabilities of the problem. The tree can become a binary tree to form the actual building of the tree. A specific use could be found in auto encoders, which combine the graph and a passing network on a large scale automatically. === Inference Algorithms === Loopy belief propagation: A different method of interpreting complex graphs. The loopy belief propagation is used when an approximate solution is needed instead of the exact solution. It is an approximate inference. Cutset conditioning: Used with smaller sets of variables. Cutset conditioning allows for simpler graphs that are easier to read but are not exact.

  Read more →
• 

  Apache Giraph

  Apache Giraph is an Apache project to perform graph processing on big data. Giraph utilizes Apache Hadoop's MapReduce implementation to process graphs. Facebook used Giraph with some performance improvements to analyze one trillion edges using 200 machines in 4 minutes. Giraph is based on a paper published by Google about its own graph processing system called Pregel. It can be compared to other Big Graph processing libraries such as Cassovary. As of September 2023, it is no longer actively developed.

  Read more →
• 

  Unspent transaction output

  In cryptocurrencies, an unspent transaction output (UTXO, often capitalized as UTxO) is a distinctive element in a subset of digital currency models. A UTXO represents a certain amount of cryptocurrency that has been authorized by a sender and is available to be spent by a recipient. The utilization of UTXOs in transaction processes is a key feature of many cryptocurrencies, but it primarily characterizes those implementing the UTXO model. UTXOs employ public key cryptography to ascertain and transfer ownership. More specifically, the recipient's public key is formatted into the UTXO, thereby limiting the capability to spend the UTXO to the account that can demonstrate ownership of the corresponding private key. A valid digital signature associated with the public key must be included for the UTXO to be spent. In the UTXO model, each unit of currency is treated as a discrete object. The history of a UTXO is documented only within the blocks where it is transferred. To ascertain the total balance of an account, one must scan each block to find the latest UTXOs linked to that account. While all nodes within a blockchain network must consent to the block history, the blocks relevant to an account's balance are unique to that account. UTXOs constitute a chain of ownership depicted as a series of digital signatures dating back to the coin's inception, regardless of whether the coin was minted via mining, staking, or another procedure determined by the cryptocurrency protocol. The UTXO model was invented for Bitcoin. Cardano uses an extended version of the UTXO model known as EUTXO. == Origins == The conceptual framework of the UTXO model can be traced back to Hal Finney's Reusable Proofs of Work proposal, which itself was based on Adam Back's 1997 Hashcash proposal. Bitcoin, released in 2009, was the first widespread implementation of the UTXO model in practice. == UTXO model vs. account Model == Cryptocurrencies that utilize the UTXO model function differently compared to those using the account model. In the UTXO model, individual units of cryptocurrency, termed as unspent transaction outputs (UTXOs), are transferred between users, analogous to the exchange of physical cash. This model impacts how transactions and ownership are recorded and verified within the blockchain network. The account model preserves a record of each account and its corresponding balance for every block added to the network. This setup enables quicker balance verification without the need to scan historical blocks, but it increases the raw size of each block (though data compression techniques can be utilized to alleviate this). However, both models necessitate the inspection of past blocks to fully authenticate the origin of coins. In the UTXO model, each object is immutable - units of coins cannot be 'edited' in the same way an account balance is modified when a transaction occurs. Rather, the balance is computed from the transaction history dating back to when the coins were first minted. This simplicity enhances security, as a UTXO either exists in its anticipated form or it does not. In contrast, the account model requires meticulous verification of the account's status during transactions, which can lead to oversights if not conducted correctly. In valid blockchain transactions, only unspent outputs (UTXOs) are permissible for funding subsequent transactions. This requirement is critical to prevent double-spending and fraud. Accordingly, inputs in a transaction are removed from the UTXO set, while outputs create new UTXOs that are added to the set. The holders of private keys, such as those with cryptocurrency wallets, can utilize these UTXOs for future transactions.

  Read more →
• 

  Recursive neural network

  A recursive neural network is a kind of deep neural network created by applying the same set of weights recursively over a structured input, to produce a structured prediction over variable-size input structures, or a scalar prediction on it, by traversing a given structure in topological order. These networks were first introduced to learn distributed representations of structure (such as logical terms), but have been successful in multiple applications, for instance in learning sequence and tree structures in natural language processing (mainly continuous representations of phrases and sentences based on word embeddings). == Architectures == === Basic === In the simplest architecture, nodes are combined into parents using a weight matrix (which is shared across the whole network) and a non-linearity such as the tanh {\displaystyle \tanh } hyperbolic function. If c 1 {\displaystyle c_{1}} and c 2 {\displaystyle c_{2}} are n {\displaystyle n} -dimensional vector representations of nodes, their parent will also be an n {\displaystyle n} -dimensional vector, defined as: p 1 , 2 = tanh ⁡ ( W [ c 1 ; c 2 ] ) {\displaystyle p_{1,2}=\tanh(W[c_{1};c_{2}])} where W {\displaystyle W} is a learned n × 2 n {\displaystyle n\times 2n} weight matrix. This architecture, with a few improvements, has been used for successfully parsing natural scenes, syntactic parsing of natural language sentences, and recursive autoencoding and generative modeling of 3D shape structures in the form of cuboid abstractions. === Recursive cascade correlation (RecCC) === RecCC is a constructive neural network approach to deal with tree domains with pioneering applications to chemistry and extension to directed acyclic graphs. === Unsupervised RNN === A framework for unsupervised RNN has been introduced in 2004. === Tensor === Recursive neural tensor networks use a single tensor-based composition function for all nodes in the tree. == Training == === Stochastic gradient descent === Typically, stochastic gradient descent (SGD) is used to train the network. The gradient is computed using backpropagation through structure (BPTS), a variant of backpropagation through time used for recurrent neural networks. == Properties == The universal approximation capability of RNNs over trees has been proved in literature. == Related models == === Recurrent neural networks === Recurrent neural networks are recursive artificial neural networks with a certain structure: that of a linear chain. Whereas recursive neural networks operate on any hierarchical structure, combining child representations into parent representations, recurrent neural networks operate on the linear progression of time, combining the previous time step and a hidden representation into the representation for the current time step. === Tree Echo State Networks === An efficient approach to implement recursive neural networks is given by the Tree Echo State Network within the reservoir computing paradigm. === Extension to graphs === Extensions to graphs include graph neural network (GNN), Neural Network for Graphs (NN4G), and more recently convolutional neural networks for graphs.

  Read more →
• 

  Nearest neighbor search

  Nearest neighbor search (NNS), as a form of proximity search, is the optimization problem of finding the point in a given set that is closest (or most similar) to a given point. Closeness is typically expressed in terms of a dissimilarity function: the less similar the objects, the larger the function values. Formally, the nearest neighbor (NN) search problem is defined as follows: given a set S of points in a space M and a query point q ∈ M {\displaystyle q\in M} , find the closest point in S to q. Donald Knuth in volume 3 of The Art of Computer Programming (1973) called it the post-office problem, referring to an application of assigning to a residence the nearest post office. A direct generalization of this problem is a k-NN search, where we need to find the k closest points. Most commonly M is a metric space and dissimilarity is expressed as a distance metric, which is symmetric and satisfies the triangle inequality. Even more common, M is taken to be the d-dimensional vector space where dissimilarity is measured using the Euclidean distance, Manhattan distance or other distance metric. However, the dissimilarity function can be arbitrary. One example is asymmetric Bregman divergence, for which the triangle inequality does not hold. == Applications == The nearest neighbor search problem arises in numerous fields of application, including: Pattern recognition – in particular for optical character recognition Statistical classification – see k-nearest neighbor algorithm Computer vision – for point cloud registration Computational geometry – see Closest pair of points problem Cryptanalysis – for lattice problem Databases – e.g. content-based image retrieval Coding theory – see maximum likelihood decoding Semantic search Vector databases, where nearest-neighbor lookup over embeddings is used to retrieve semantically similar records Retrieval-augmented generation systems, where nearest-neighbor retrieval over embeddings is used to fetch candidate passages or documents before generation Data compression – see MPEG-2 standard Robotic sensing Recommendation systems, e.g. see Collaborative filtering Internet marketing – see contextual advertising and behavioral targeting DNA sequencing Spell checking – suggesting correct spelling Plagiarism detection Similarity scores for predicting career paths of professional athletes. Cluster analysis – assignment of a set of observations into subsets (called clusters) so that observations in the same cluster are similar in some sense, usually based on Euclidean distance Chemical similarity Sampling-based motion planning == Methods == Various solutions to the NNS problem have been proposed. The quality and usefulness of the algorithms are determined by the time complexity of queries as well as the space complexity of any search data structures that must be maintained. The informal observation usually referred to as the curse of dimensionality states that there is no general-purpose exact solution for NNS in high-dimensional Euclidean space using polynomial preprocessing and polylogarithmic search time. === Exact methods === ==== Linear search ==== The simplest solution to the NNS problem is to compute the distance from the query point to every other point in the database, keeping track of the "best so far". This algorithm, sometimes referred to as the naive approach, has a running time of O(dN), where N is the cardinality of S and d is the dimensionality of S. There are no search data structures to maintain, so the linear search has no space complexity beyond the storage of the database. Naive search can, on average, outperform space partitioning approaches on higher dimensional spaces. The absolute distance is not required for distance comparison, only the relative distance. In geometric coordinate systems the distance calculation can be sped up considerably by omitting the square root calculation from the distance calculation between two coordinates. The distance comparison will still yield identical results. ==== Space partitioning ==== Since the 1970s, the branch and bound methodology has been applied to the problem. In the case of Euclidean space, this approach encompasses spatial index or spatial access methods. Several space-partitioning methods have been developed for solving the NNS problem. Perhaps the simplest is the k-d tree, which iteratively bisects the search space into two regions containing half of the points of the parent region. Queries are performed via traversal of the tree from the root to a leaf by evaluating the query point at each split. Depending on the distance specified in the query, neighboring branches that might contain hits may also need to be evaluated. For constant dimension query time, average complexity is O(log N) in the case of randomly distributed points, worst case complexity is O(kN^(1-1/k)) Alternatively the R-tree data structure was designed to support nearest neighbor search in dynamic context, as it has efficient algorithms for insertions and deletions such as the R tree. R-trees can yield nearest neighbors not only for Euclidean distance, but can also be used with other distances. In the case of general metric space, the branch-and-bound approach is known as the metric tree approach. Particular examples include vp-tree and BK-tree methods. Using a set of points taken from a 3-dimensional space and put into a BSP tree, and given a query point taken from the same space, a possible solution to the problem of finding the nearest point-cloud point to the query point is given in the following description of an algorithm. (Strictly speaking, no such point may exist, because it may not be unique. But in practice, usually we only care about finding any one of the subset of all point-cloud points that exist at the shortest distance to a given query point.) The idea is, for each branching of the tree, guess that the closest point in the cloud resides in the half-space containing the query point. This may not be the case, but it is a good heuristic. After having recursively gone through all the trouble of solving the problem for the guessed half-space, now compare the distance returned by this result with the shortest distance from the query point to the partitioning plane. This latter distance is that between the query point and the closest possible point that could exist in the half-space not searched. If this distance is greater than that returned in the earlier result, then clearly there is no need to search the other half-space. If there is such a need, then you must go through the trouble of solving the problem for the other half space, and then compare its result to the former result, and then return the proper result. The performance of this algorithm is nearer to logarithmic time than linear time when the query point is near the cloud, because as the distance between the query point and the closest point-cloud point nears zero, the algorithm needs only perform a look-up using the query point as a key to get the correct result. === Approximation methods === An approximate nearest neighbor search algorithm is allowed to return points whose distance from the query is at most c {\displaystyle c} times the distance from the query to its nearest points. The appeal of this approach is that, in many cases, an approximate nearest neighbor is almost as good as the exact one. In particular, if the distance measure accurately captures the notion of user quality, then small differences in the distance should not matter. ==== Greedy search in proximity neighborhood graphs ==== Proximity graph methods (such as navigable small world graphs and HNSW) are considered the current state-of-the-art for the approximate nearest neighbors search. The methods are based on greedy traversing in proximity neighborhood graphs G ( V , E ) {\displaystyle G(V,E)} in which every point x i ∈ S {\displaystyle x_{i}\in S} is uniquely associated with vertex v i ∈ V {\displaystyle v_{i}\in V} . The search for the nearest neighbors to a query q in the set S takes the form of searching for the vertex in the graph G ( V , E ) {\displaystyle G(V,E)} . The basic algorithm – greedy search – works as follows: search starts from an enter-point vertex v i ∈ V {\displaystyle v_{i}\in V} by computing the distances from the query q to each vertex of its neighborhood { v j : ( v i , v j ) ∈ E } {\displaystyle \{v_{j}:(v_{i},v_{j})\in E\}} , and then finds a vertex with the minimal distance value. If the distance value between the query and the selected vertex is smaller than the one between the query and the current element, then the algorithm moves to the selected vertex, and it becomes new enter-point. The algorithm stops when it reaches a local minimum: a vertex whose neighborhood does not contain a vertex that is closer to the query than the vertex itself. The idea of proximity neighborhood graphs was exploited in multiple publications, including the seminal paper by Arya and Mount, in the VoroNet syst

  Read more →
• 

  List of datasets for machine-learning research

  These datasets are used in machine learning (ML) research and have been cited in peer-reviewed academic journals. Datasets are an integral part of the field of machine learning. Major advances in this field can result from advances in learning algorithms (such as deep learning), computer hardware, and, less intuitively, the availability of high-quality training datasets. High-quality labeled training datasets for supervised and semi-supervised machine-learning algorithms are usually difficult and expensive to produce because of the large amount of time needed to label the data. Although they do not need to be labeled, high-quality unlabeled datasets for unsupervised learning can also be difficult and costly to produce. Many organizations, including governments, publish and share their datasets, often using common metadata formats (such as Croissant). The datasets are classified, based on the licenses, into two groups: open data and non-open data. The datasets from various governmental-bodies are presented in List of open government data sites. The datasets are ported on open data portals. They are made available for searching, depositing and accessing through interfaces like Open API. The datasets are made available as various sorted types and subtypes. == List of sorting used for datasets == The data portal is classified based on its type of license. The open source license based data portals are known as open data portals which are used by many government organizations and academic institutions. == List of open data portals == == List of portals suitable for multiple types of applications == The data portal sometimes lists a wide variety of subtypes of datasets pertaining to many machine learning applications. == List of portals suitable for a specific subtype of applications == The data portals which are suitable for a specific subtype of machine learning application are listed in the subsequent sections. == Image data == == Text data == These datasets consist primarily of text for tasks such as natural language processing, sentiment analysis, translation, and cluster analysis. === Reviews === === News articles === === Messages === === Twitter and tweets === === Dialogues === === Legal === === Other text === == Sound data == These datasets consist of sounds and sound features used for tasks such as speech recognition and speech synthesis. === Speech === === Music === === Other sounds === == Signal data == Datasets containing electric signal information requiring some sort of signal processing for further analysis. === Electrical === === Motion-tracking === === Other signals === == Chemical data == Datasets from physical systems. === Chemical Reactions with transition states (TS) === === OpenReACT-CHON-EFH === OpenReACT-CHON-EFH (Open Reaction Dataset of Atomic ConfiguraTions comprising C, H, O and N with Energies, Forces and Hessians) is a 2025 open-access benchmark for machine-learning interatomic potentials. RTP set – 35,087 stationary-point geometries (reactant, transition state and product) drawn from 11,961 elementary reactions, each labeled with density-functional energies, atomic forces and full Hessian matrices at the ωB97X-D/6-31G(d) level. IRC set – 34,248 structures along 600 minimum-energy reaction paths, used to test extrapolation beyond trained stationary points. NMS set – 62,527 off-equilibrium geometries generated by normal-mode sampling to probe model robustness under thermal perturbations. The collection underpins the study Does Hessian Data Improve the Performance of Machine Learning Potentials? and was used to train and benchmark the machine-learning interatomic potentials reported therein. The dataset itself is distributed under a CC licence via Figshare. == Physical data == Datasets from physical systems. === High-energy physics === === Systems === === Astronomy === === Earth science === === Other physical === == Biological data == Datasets from biological systems. === Human === === Animal === === Fungi === === Plant === === Microbe === === Drug discovery === == Anomaly data == == Question answering data == This section includes datasets that deals with structured data. == Dialog or instruction prompted data == This section includes datasets that contains multi-turn text with at least two actors, a "user" and an "agent". The user makes requests for the agent, which performs the request. == Cybersecurity == == Climate and sustainability == == Code data == == Multivariate data == === Financial === === Weather === === Census === === Transit === === Internet === === Games === === Other multivariate === == Curated repositories of datasets == As datasets come in myriad formats and can sometimes be difficult to use, there has been considerable work put into curating and standardizing the format of datasets to make them easier to use for machine learning research. OpenML: Web platform with Python, R, Java, and other APIs for downloading hundreds of machine learning datasets, evaluating algorithms on datasets, and benchmarking algorithm performance against dozens of other algorithms. PMLB: A large, curated repository of benchmark datasets for evaluating supervised machine learning algorithms. Provides classification and regression datasets in a standardized format that are accessible through a Python API. Metatext NLP: https://metatext.io/datasets web repository maintained by community, containing nearly 1000 benchmark datasets, and counting. Provides many tasks from classification to QA, and various languages from English, Portuguese to Arabic. Appen: Off The Shelf and Open Source Datasets hosted and maintained by the company. These biological, image, physical, question answering, signal, sound, text, and video resources number over 250 and can be applied to over 25 different use cases.

  Read more →
• 

  Dropbox Carousel

  Dropbox Carousel was a photo and video management app offered by Dropbox. The third-party native app, available on Android and iOS, allowed users to store, manage, and organize photos. Photos were organized by date, time and event and backed up on Dropbox. It competed in this space against other online photo storage services such as Google's Google Photos, Apple's iCloud, and Yahoo's Flickr. Chris Lee, Dropbox's head of product development for Carousel described the app as an add-on to Dropbox, a “dedicated experience for photos and videos” and a space for “reliving personal memories”. == History == Mailbox founder, Gentry Underwood unveiled Carousel at a gathering in San Francisco on April 9, 2014. Much of the features in Carousel come from Snapjoy, a photo start-up, that Dropbox acquired on December 19, 2012. When Carousel was launched, it marked amongst many others, a series of acquisitions made by Dropbox to prep up before opening its stock for public offering. The acquisitions would help demonstrate its expansive product offerings pitching potential profitability to investors. In December 2015, Dropbox announced that Carousel would be shut down and some Carousel features would be integrated into the primary Dropbox application. On March 31, 2016, Carousel was deactivated. == Features == Carousel prompted users to free local storage once it had synced and backed-up local photos to the cloud. Flashback was a feature (enabled by default) that showed past photos or videos taken the same day, a year, or some years back. Flashback used an algorithm designed to identify human faces - resulting in greater likelihood of the user's picture or people in the user's close circle appearing. A scrollable timeline, which was earlier a scroll wheel, at the bottom let the user scroll to photo(s) at a specific date with a finger swipe.

  Read more →
• 

  Probit model

  In statistics, a probit model is a type of regression where the dependent variable can take only two values, for example married or not married. The word is a portmanteau, coming from probability + unit. The purpose of the model is to estimate the probability that an observation with particular characteristics will fall into a specific one of the categories; moreover, classifying observations based on their predicted probabilities is a type of binary classification model. A probit model is a popular specification for a binary response model. As such it treats the same set of problems as does logistic regression using similar techniques. When viewed in the generalized linear model framework, the probit model employs a probit link function. It is most often estimated using the maximum likelihood procedure, such an estimation being called a probit regression. == Conceptual framework == Suppose a response variable Y is binary, that is it can have only two possible outcomes which we will denote as 1 and 0. For example, Y may represent presence/absence of a certain condition, success/failure of some device, answer yes/no on a survey, etc. We also have a vector of regressors X, which are assumed to influence the outcome Y. Specifically, we assume that the model takes the form P ( Y = 1 ∣ X ) = Φ ( X T β ) , {\displaystyle P(Y=1\mid X)=\Phi (X^{\operatorname {T} }\beta ),} where P is the probability and Φ {\displaystyle \Phi } is the cumulative distribution function (CDF) of the standard normal distribution. The parameters β are typically estimated by maximum likelihood. It is possible to motivate the probit model as a latent variable model. Suppose there exists an auxiliary random variable Y ∗ = X T β + ε , {\displaystyle Y^{\ast }=X^{T}\beta +\varepsilon ,} where ε ~ N(0, 1). Then Y can be viewed as an indicator for whether this latent variable is positive: Y = { 1 Y ∗ > 0 0 otherwise } = { 1 X T β + ε > 0 0 otherwise } {\displaystyle Y=\left.{\begin{cases}1&Y^{}>0\\0&{\text{otherwise}}\end{cases}}\right\}=\left.{\begin{cases}1&X^{\operatorname {T} }\beta +\varepsilon >0\\0&{\text{otherwise}}\end{cases}}\right\}} The use of the standard normal distribution causes no loss of generality compared with the use of a normal distribution with an arbitrary mean and standard deviation, because adding a fixed amount to the mean can be compensated by subtracting the same amount from the intercept, and multiplying the standard deviation by a fixed amount can be compensated by multiplying the weights by the same amount. To see that the two models are equivalent, note that P ( Y = 1 ∣ X ) = P ( Y ∗ > 0 ) = P ( X T β + ε > 0 ) = P ( ε > − X T β ) = P ( ε < X T β ) by symmetry of the normal distribution = Φ ( X T β ) {\displaystyle {\begin{aligned}P(Y=1\mid X)&=P(Y^{\ast }>0)\\&=P(X^{\operatorname {T} }\beta +\varepsilon >0)\\&=P(\varepsilon >-X^{\operatorname {T} }\beta )\\&=P(\varepsilon 0 {\displaystyle t,\lim _{n\rightarrow \infty }n_{t}/n=c_{t}>0} . Denote p ^ t = r t / n t {\displaystyle {\hat {p}}_{t}=r_{t}/n_{t}} σ ^ t 2 = 1 n t p ^ t ( 1 − p ^ t ) φ 2 ( Φ − 1 ( p ^ t ) ) {\displaystyle {\hat {\sigma }}_{t}^{2}={\frac {1}{n_{t}}}{\frac {{\hat {p}}_{t}(1-{\hat {p}}_{t})}{\varphi ^{2}{\big (}\Phi ^{-1}({\hat {p}}_{t}){\big )}}}} Then Berkson's minimum chi-square estimator is a generalized least squares estimator in a regression of Φ − 1 ( p ^ t ) {\displaystyle \Phi ^{-1}({\hat {p}}_{t})} on x ( t ) {\displaystyle x_{(t)}} with weights σ ^ t − 2 {\displaystyle {\hat {\sigma }}_{t}^{-2}} : β ^ = ( ∑ t = 1 T σ ^ t − 2 x ( t ) x ( t ) T ) − 1 ∑ t = 1 T σ ^ t − 2 x ( t ) Φ − 1 ( p ^ t ) {\displaystyle {\hat {\beta }}={\Bigg (}\sum _{t=1}^{T}{\hat {\sigma }}_{t}^{-2}x_{(t)}x_{(t)}^{\operatorname {T} }{\Bigg )}^{-1}\sum _{t=1}^{T}{\hat {\sigma }}_{t}^{-2}x_{(t)}\Phi ^{-1}({\hat {p}}_{t})} It can be shown that this estimator is consistent (as n→∞ and T fixed), asymptotically normal and efficient. Its advantage is the presence of a closed-form formula for the estimator. However, it is only meaningful to carry out this analysis when individual observations are not available, only their aggregated counts r t {\displaystyle r_{t}} , n t {\disp

  Read more →
• 

  Concept class

  In computational learning theory in mathematics, a concept over a domain X is a total Boolean function over X. A concept class is a class of concepts. Concept classes are a subject of computational learning theory. Concept class terminology frequently appears in model theory associated with probably approximately correct (PAC) learning. In this setting, if one takes a set Y as a set of (classifier output) labels, and X is a set of examples, the map c : X → Y {\displaystyle c:X\to Y} , i.e. from examples to classifier labels (where Y = { 0 , 1 } {\displaystyle Y=\{0,1\}} and where c is a subset of X), c is then said to be a concept. A concept class C {\displaystyle C} is then a collection of such concepts. Given a class of concepts C, a subclass D is reachable if there exists a sample s such that D contains exactly those concepts in C that are extensions to s. Not every subclass is reachable. == Background == A sample s {\displaystyle s} is a partial function from X {\displaystyle X} to { 0 , 1 } {\displaystyle \{0,1\}} . Identifying a concept with its characteristic function mapping X {\displaystyle X} to { 0 , 1 } {\displaystyle \{0,1\}} , it is a special case of a sample. Two samples are consistent if they agree on the intersection of their domains. A sample s ′ {\displaystyle s'} extends another sample s {\displaystyle s} if the two are consistent and the domain of s {\displaystyle s} is contained in the domain of s ′ {\displaystyle s'} . == Examples == Suppose that C = S + ( X ) {\displaystyle C=S^{+}(X)} . Then: the subclass { { x } } {\displaystyle \{\{x\}\}} is reachable with the sample s = { ( x , 1 ) } {\displaystyle s=\{(x,1)\}} ; the subclass S + ( Y ) {\displaystyle S^{+}(Y)} for Y ⊆ X {\displaystyle Y\subseteq X} are reachable with a sample that maps the elements of X − Y {\displaystyle X-Y} to zero; the subclass S ( X ) {\displaystyle S(X)} , which consists of the singleton sets, is not reachable. == Applications == Let C {\displaystyle C} be some concept class. For any concept c ∈ C {\displaystyle c\in C} , we call this concept 1 / d {\displaystyle 1/d} -good for a positive integer d {\displaystyle d} if, for all x ∈ X {\displaystyle x\in X} , at least 1 / d {\displaystyle 1/d} of the concepts in C {\displaystyle C} agree with c {\displaystyle c} on the classification of x {\displaystyle x} . The fingerprint dimension F D ( C ) {\displaystyle FD(C)} of the entire concept class C {\displaystyle C} is the least positive integer d {\displaystyle d} such that every reachable subclass C ′ ⊆ C {\displaystyle C'\subseteq C} contains a concept that is 1 / d {\displaystyle 1/d} -good for it. This quantity can be used to bound the minimum number of equivalence queries needed to learn a class of concepts according to the following inequality: F D ( C ) − 1 ≤ # E Q ( C ) ≤ ⌈ F D ( C ) ln ⁡ ( | C | ) ⌉ {\textstyle FD(C)-1\leq \#EQ(C)\leq \lceil FD(C)\ln(|C|)\rceil } .

  Read more →