AI Coding Interview Questions

AI Coding Interview Questions — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Shape factor (image analysis and microscopy)

    Shape factor (image analysis and microscopy)

    Shape factors are dimensionless quantities used in image analysis and microscopy that numerically describe the shape of a particle, independent of its size. Shape factors are calculated from measured dimensions, such as diameter, chord lengths, area, perimeter, centroid, moments, etc. The dimensions of the particles are usually measured from two-dimensional cross-sections or projections, as in a microscope field, but shape factors also apply to three-dimensional objects. The particles could be the grains in a metallurgical or ceramic microstructure, or the microorganisms in a culture, for example. The dimensionless quantities often represent the degree of deviation from an ideal shape, such as a circle, sphere or equilateral polyhedron. Shape factors are often normalized, that is, the value ranges from zero to one. A shape factor equal to one usually represents an ideal case or maximum symmetry, such as a circle, sphere, square or cube. == Aspect ratio == The most common shape factor is the aspect ratio, a function of the largest diameter and the smallest diameter orthogonal to it: A R = d min d max {\displaystyle A_{R}={\frac {d_{\min }}{d_{\max }}}} The normalized aspect ratio varies from approaching zero for a very elongated particle, such as a grain in a cold-worked metal, to near unity for an equiaxed grain. The reciprocal of the right side of the above equation is also used, such that the AR varies from one to approaching infinity. == Circularity == Another very common shape factor is the circularity (or isoperimetric quotient), a function of the perimeter P and the area A: f circ = 4 π A P 2 {\displaystyle f_{\text{circ}}={\frac {4\pi A}{P^{2}}}} The circularity of a circle is 1, and much less than one for a starfish footprint. The reciprocal of the circularity equation is also used, such that fcirc varies from one for a circle to infinity. == Elongation shape factor == The less-common elongation shape factor is defined as the square root of the ratio of the two second moments in of the particle around its principal axes. f elong = i 2 i 1 {\displaystyle f_{\text{elong}}={\sqrt {\frac {i_{2}}{i_{1}}}}} == Compactness shape factor == The compactness shape factor is a function of the polar second moment in of a particle and a circle of equal area A. f comp = A 2 2 π i 1 2 + i 2 2 {\displaystyle f_{\text{comp}}={\frac {A^{2}}{2\pi {\sqrt {{i_{1}}^{2}+{i_{2}}^{2}}}}}} The fcomp of a circle is one, and much less than one for the cross-section of an I-beam. == Waviness shape factor == The waviness shape factor of the perimeter is a function of the convex portion Pcvx of the perimeter to the total. f wav = P cvx P {\displaystyle f_{\text{wav}}={\frac {P_{\text{cvx}}}{P}}} Some properties of metals and ceramics, such as fracture toughness, have been linked to grain shapes. == An application of shape factors == Greenland, the largest island in the world, has an area of 2,166,086 km2; a coastline (perimeter) of 39,330 km; a north–south length of 2670 km; and an east–west length of 1290 km. The aspect ratio of Greenland is A R = 1290 2670 = 0.483 {\displaystyle A_{R}={\frac {1290}{2670}}=0.483} The circularity of Greenland is f circ = 4 π ( 2166086 ) 39330 2 = 0.0176. {\displaystyle f_{\text{circ}}={\frac {4\pi (2166086)}{39330^{2}}}=0.0176.} The aspect ratio is agreeable with an eyeball-estimate on a globe. Such an estimate on a typical flat map, using the Mercator projection, would be less accurate due to the distorted scale at high latitudes. The circularity is deceptively low, due to the fjords that give Greenland a very jagged coastline (see the coastline paradox). A low value of circularity does not necessarily indicate a lack of symmetry, and shape factors are not limited to microscopic objects.

    Read more →
  • Prequel (mobile application)

    Prequel (mobile application)

    Prequel, Inc. is an American technology company and mobile app developer known for developing the Prequel mobile application, which enables editing photos and videos with filters and effects generated using artificial intelligence. Prequel was founded in 2018 by Serge Aliseenko and Timur Khabirov, who currently serves as the company's CEO. It is headquartered in New York City. As of August 2022, it had been downloaded more than 100 million times. == History == In 2016, entrepreneur Timur Khabirov and investor Serge Aliseenko registered a US corporation named AIAR Labs Inc, which was developing AR solutions as an outsourced contractor. Of several proprietary products, Prequel was selected for beta-testing as a product focused on editing photos and videos. In 2018, Prequel was released on the Apple App Store. The launch cost $3 million USD, financed with the founders’ personal funds. The first release included approximately 10 filters for photos and the same amount of effects that augmented images with rose petals, rain and snow, VHS and film reel simulations, glitch, grain, sun puddles, and lomography. By June 2020, the app had also been released for Android. In 2021, Prequel founders Timur Khabirov and Serge Aliseenko launched a venture studio for startups working with artificial, computer vision, and AR-based visual art. In December 2022, Prequel reached the number 14 slot on the global rankings for Apple App Store’s Top Charts and the number 5 slot on the App Store’s U.S. charts. In March 2023, Prequel launched a new app called Artique, which is an AI-powered image editing app for businesses. Artique provides advertising and marketing graphic design using ready-made templates that users can customize, while giving suggestions and visual cues through artificial intelligence. Prequel was also one of the companies participating in discussions about artificial intelligence at SXSW 2023. == Features == Prequel describes its app as an "Aesthetic Pic Editor. The app uses artificial intelligence to create and edit content. Prequel can be used to touch up faces on images and videos and can also tie various decorative elements to certain points on the human body and face. Prequel filters include the "Cartoon" filter, which converts selfies into cartoon-style pictures. Other filters include Kidcore, Dust, Grain, Fisheye, Retro Style, Miami, Disco, and VHS-style filters, as well as the ability to create Renaissance-style pictures. Prequel also gives users the ability to apply color correction tools and to make moving images with 3D effects out of 2D images. Prequel allows users to take photos and videos directly through the app and apply filters and effects in real time. The app also comes with manual editing options for photos, such as adjusting the brightness and/or exposure and cropping photos, as well as an option to automatically apply adjustments. The Prequel app uses the Core ML, MNN, and TFLight frameworks to work with its neural networks. Some AI solutions are launched server-side, and some on the user's mobile device. A resulting photo or video edited with the app is called "a prequel." The app daily generates over 2 million such prequels, which are published by users in Instagram, TikTok, and other social media. As of 2022, the app has more than 800 filters and effects, along with video templates and support for GIFs and stickers. Prequel is free-to-use, but has a premium version that gives users access to more effects, filters, and beauty tools. Since its launch in 2018, Prequel has been downloaded more than 100 million times.

    Read more →
  • Imaging phantom

    Imaging phantom

    An imaging phantom, or simply phantom (less commonly spelled fantom), is a specially designed object that is scanned or imaged in the field of medical imaging to evaluate, analyze, and tune the performance of various imaging devices. A phantom is more readily available and provides more consistent results than the use of a living subject or cadaver, while also avoiding direct risks to living subjects. Phantoms were originally employed in 2D x-ray–based imaging techniques such as radiography or fluoroscopy, but more recently phantoms with desired imaging characteristics have been developed for 3D techniques such as SPECT, MRI, CT, ultrasound, PET, and other imaging modalities. == Design == A phantom used to evaluate an imaging device should respond in a similar manner to how human tissues and organs would act in that specific imaging modality. For instance, phantoms made for 2D radiography may hold various quantities of x-ray contrast agents with similar x-ray absorbing properties (such as the attenuation coefficient) to normal tissue to tune the contrast of the imaging device or modulate the patient's exposure to radiation. In such a case, the radiography phantom would not necessarily need to have similar textures and mechanical properties since these are not relevant in x-ray imaging modalities. However, in the case of ultrasonography, a phantom with similar rheological and ultrasound scattering properties to real tissue would be essential, but x-ray absorbing properties would not be relevant. The term "phantom" describes an object that is designed to resemble human tissue and can be evaluated, analyzed or manipulated to study the performance of a medical device. Phantoms are created using a digital file that is rendered through magnetic resonance imaging (MRI) or computer-aided design (CAD). The digital files allow for quick modifications that are read by the 3D printer. The 3D printer will create the product in successive layers using polymeric materials. There are several types of phantoms including tissue-mimicking, radiological phantoms, dental phantoms, BOMABs (used to calibrate whole-body counters), and more.

    Read more →
  • Radar geo-warping

    Radar geo-warping

    Radar geo-warping is the adjustment of geo-referenced radar images and video data to be consistent with a geographical projection. This image warping avoids any restrictions when displaying it together with video from multiple radar sources or with other geographical data including scanned maps and satellite images which may be provided in a particular projection. There are many areas where geo warping has unique benefits: Single radar video signal displayed together with maps of different geographical projections. E.g. Mercator UTM stereographic Multiple radar video signals displayed simultaneously: Having the computing power to do so on one computer. Adapting the projection of all radar signals allowing the geographically correct display and accurate superimposition of those videos. Slant range correction: a modern 3D radar system can measure the height of a target and hence it is possible to correct the radar video by the real corrected range of the target. Slant Range Correction also allows to compensate the radar tower height e.g. for maritime surveillance radars. == Introduction == Radar video presents the echoes of electromagnetic waves a radar system has emitted and received as reflections afterwards. These echoes are typically presented on a computer screen with a color-coding scheme depicting the reflection strength. Two problems have to be solved during such a visualization process. The first problem arises from the fact that typically the radar antenna turns around its position and measures the reflection echo distances from its position in one direction. This effectively means that the radar video data are present in polar coordinates. In older systems the polar oriented picture has been displayed in so called plan position indicators (PPI). The PPI-scope uses a radial sweep pivoting about the center of the presentation. This results in a map-like picture of the area covered by the radar beam. A long-persistence screen is used so that the display remains visible until the sweep passes again. Bearing to the target is indicated by the target's angular position in relation to an imaginary line extending vertically from the sweep origin to the top of the scope. The top of the scope is either true north (when the indicator is operated in the true bearing mode) or ship's heading (when the indicator is operated in the relative bearing mode). For visualization on a modern computer screen the polar coordinates have to be converted into Cartesian coordinates. This process called radar scan conversion is presented with more detail in the next section. The second problem to solve arises from the fact that a radar system is placed in the real world and measures real world echo positions. These echoes have to be displayed together with other real world data like object positions, vector maps and satellite images in a consistent way. All this information refers to the curved earth surface but is displayed on a flat computer display. Building a link from real world earth positions to display pixels is commonly called geographical referencing or in short geo-referencing. Part of the geo-referencing process is to map the 3D earth surface onto a 2D display. This process of a geographical projection can be performed in many ways, but different data sources have their own 'natural' projection. E.g. Cartesian radar video data from a radar source on the earth surface are geo-referenced by a so-called radar projection. When using this radar projection the Cartesian radar video pixels can directly displayed on a computer screen (only being linearly transformed according to the current position on the screen and e.g. the current zoom level). A problem now arises if e.g. also a satellite map shall be shown together with the radar video data. The 'natural' geographical projection of a satellite image would be a satellite projection which depends on the satellite orbit, position and further parameters. Now either the satellite image has to be reprojected to a radar projection or the radar video has to use the satellite projection. This geographical re-projection is also called geographical warping or Geo Warping where each image pixel has to be transformed from one projection into another. This article describes in further detail the Geo Warping of radar video images in real time. It will also show that radar video Geo Warping is done most efficiently when it is integrated with the radar scan conversion process. == Radar-scan conversion == This section describes the principles of the radar-scan conversion (RSC) process. The radar supplies its measured data in polar coordinates (ρ,θ) directly from the rotating antenna. ρ defines the target/echo distance and θ the target angle in polar world coordinates. These data are measured, digitized and stored in a polar coordinate polar store or polar pixmap. The main RSC task is to convert these data to Cartesian (x, y) display coordinates, creating the necessary display pixels. The RSC process is influenced by the current zoom, shift and rotation settings defining which part of the 'world' shall be visible in the display image. As detailed later the RSC process also takes the currently used geographical projection into account when the radar video images are Geo Warped. The OpenGL RSC is implemented using a reverse scan conversion approach which calculates for every image pixel the most appropriate radar amplitude value in the polar store. This approach generates an optimal image without any artifacts known from forward spoke fill algorithms. By applying bi-linear filtering between adjacent pixels in the polar store during the conversion process the OpenGL RSC finally achieves a very high visual quality radar display image for every zoom level, creating smooth images of the radar echoes. == Radar projection == This section illustrates how radar video data are geo referenced and displayed on a computer screen. The radar sensor is positioned on the earth surface with a height h above the ground. It measures the direct distance d to the target (and not e.g. the distance the target is away from the radar if one would move on the earth surface). This distance is then used in the display plane after adjustment to the current display zoom level by the radar scan converter (RSC). Now it has to be clarified how the radar video data is geo referenced. This basically means, that if we want to display a geographical real world object (like e.g. a light house) which is at the same real world position as the radar target, that it also shall appear at the same position in the display plane. This is realized by calculating the distance from the radar sensor to the respective real world object and use that distance in the display plane. The position of the real world object is typically given in geographical coordinates (latitude, longitude and height above the earth surface). In other words, using a radar projection with geographical data is done by simulating a radar measurement process with the real world objects and use the resulting range and azimuth in the display plane. The second picture to the right shows an example radar projection with the center of projection (COP) at latitude 50.0° and longitude 0.0° which is also the radar position. The dashed lines are the equal-latitude and equal-longitude lines on top of the background map. The solid lines show equal-range and equal-azimuth with the respect to the radar position. It is a feature of the radar projection that equal-range lines are circles and equal-azimuth lines are straight lines. This is necessary to display radar video consistently with other map data when using a radar projection where the projection center has to be the radar position. == Geo Warping process == This section explains the actual geo warping or re-projection process when applied to radar video in real time. Assume we want to display radar video on top of a satellite image. As an example we use the CIB projection which is used to display satellite data in CIB (Controlled Image Base) format. The Figure Geo Warping Radar to CIB Projection shows dashed the maximal range circle for a range of 111 km or 60 miles using the radar projection. Such a range is typical for long range coastal surveillance radars. As stated in the last section this is a perfect circle also on the computer screen. The solid line ellipse shows the same range circle for the CIB projection. Typically the errors occurring without Geo Warping are smallest near the radar position if at least the projection center (COP) coincides with the radar position, as realized in our example. Otherwise the error distribution depends both on the used projection and also on the projection parameters. Thus, in our case the errors are most significant near the maximum radar range. The CIB projection error corrected in east–west direction at half the radar range is 2.6 km and is 5.3 km at the full radar range of 111 km. An error of 5.3 km is

    Read more →
  • Biorobotics

    Biorobotics

    Biorobotics is an interdisciplinary science that combines the fields of biomedical engineering, cybernetics, and robotics to develop new technologies that integrate biology with mechanical systems to develop more efficient communication, alter genetic information, and create machines that imitate biological systems. == Cybernetics == Cybernetics focuses on the communication and system of living organisms and machines that can be applied and combined with multiple fields of study such as biology, mathematics, computer science, engineering, and much more. This discipline falls under the branch of biorobotics because of its combined field of study between biological bodies and mechanical systems. Studying these two systems allows for advanced analysis on the functions and processes of each system as well as the interactions between them. === History === Cybernetic theory is a concept that has existed for centuries, dating back to the era of Plato where he applied the term to refer to the "governance of people". The term cybernetique is seen in the mid-1800s used by physicist André-Marie Ampère. The term cybernetics was popularized in the late 1940s to refer to a discipline that touched on, but was separate, from established disciplines, such as electrical engineering, mathematics, and biology. === Science === Cybernetics is often misunderstood because of the breadth of disciplines it covers. In the early 20th century, it was coined as an interdisciplinary field of study that combines biology, science, network theory, and engineering. Today, it covers all scientific fields with system related processes. The goal of cybernetics is to analyze systems and processes of any system or systems in an attempt to make them more efficient and effective. === Applications === Cybernetics is used as an umbrella term so applications extend to all systems related scientific fields such as biology, mathematics, computer science, engineering, management, psychology, sociology, art, and more. Cybernetics is used amongst several fields to discover principles of systems, adaptation of organisms, information analysis and much more. == Genetic engineering == Genetic engineering is a field that uses advances in technology to modify biological organisms. Through different methods, scientists are able to alter the genetic material of microorganisms, plants and animals to provide them with desirable traits. For example, making plants grow bigger, better, and faster. Genetic engineering is included in biorobotics because it uses new technologies to alter biology and change an organism's DNA for their and society's benefit. === History === Although humans have modified genetic material of animals and plants through artificial selection for millennia (such as the genetic mutations that developed teosinte into corn and wolves into dogs), genetic engineering refers to the deliberate alteration or insertion of specific genes to an organism's DNA. The first successful case of genetic engineering occurred in 1973 when Herbert Boyer and Stanley Cohen were able to transfer a gene with antibiotic resistance to a bacterium. === Science === There are three main techniques used in genetic engineering: The plasmid method, the vector method and the biolistic method. ==== Plasmid method ==== This technique is used mainly for microorganisms such as bacteria. Through this method, DNA molecules called plasmids are extracted from bacteria and placed in a lab where restriction enzymes break them down. As the enzymes do this, some develop a rough edge that resembles that of a staircase which is considered 'sticky' and capable of reconnecting. These 'sticky' molecules are inserted into another bacteria where they will connect to the DNA rings with the altered genetic material. ==== Vector method ==== The vector method is considered a more precise technique than the plasmid method as it involves the transfer of a specific gene instead of a whole sequence. In the vector method, a specific gene from a DNA strand is isolated through restriction enzymes in a laboratory and is inserted into a vector. Once the vector accepts the genetic code, it is inserted into the host cell where the DNA will be transferred. ==== Biolistic method ==== The biolistic method is typically used to alter the genetic material of plants. This method embeds the desired DNA with a metallic particle such as gold or tungsten in a high speed gun. The particle is then bombarded into the plant. Due to the high velocities and the vacuum generated during bombardment, the particle is able to penetrate the cell wall and inserts the new DNA into the cell. === Applications === Genetic engineering has many uses in the fields of medicine, research and agriculture. In the medical field, genetically modified bacteria are used to produce drugs such as insulin, human growth hormones and vaccines. In research, scientists genetically modify organisms to observe physical and behavioral changes to understand the function of specific genes. In agriculture, genetic engineering is extremely important as it is used by farmers to grow crops that are resistant to herbicides and to insects such as BTCorn. == Bionics == Bionics is a medical engineering field and a branch of biorobotics consisting of electrical and mechanical systems that imitate biological systems, such as prosthetics and hearing aids. It's a portmanteau that combines biology and electronics. === History === The history of bionics goes as far back in time as ancient Egypt. A prosthetic toe made out of wood and leather was found on the foot of a mummy. The time period of the mummy corpse was estimated to be from around the fifteenth century B.C. Bionics can also be witnessed in ancient Greece and Rome. Prosthetic legs and arms were made for amputee soldiers. In the early 16th century, a French military surgeon by the name of Ambroise Pare became a pioneer in the field of bionics. He was known for making various types of upper and lower prosthetics. One of his most famous prosthetics, Le Petit Lorrain, was a mechanical hand operated by catches and springs. During the early 19th century, Alessandro Volta further progressed bionics. He set the foundation for the creation of hearing aids with his experiments. He found that electrical stimulation could restore hearing by inserting an electrical implant to the saccular nerve of a patient's ear. In 1945, the National Academy of Sciences created the Artificial Limb Program, which focused on improving prosthetics since there were a large number of World War II amputee soldiers. Since this creation, prosthetic materials, computer design methods, and surgical procedures have improved, creating modern-day bionics. === Science === ==== Prosthetics ==== The important components that make up modern-day prosthetics are the pylon, the socket, and the suspension system. The pylon is the internal frame of the prosthetic that is made up of metal rods or carbon-fiber composites. The socket is the part of the prosthetic that connects the prosthetic to the person's missing limb. The socket consists of a soft liner that makes the fit comfortable, but also snug enough to stay on the limb. The suspension system is important in keeping the prosthetic on the limb. The suspension system is usually a harness system made up of straps, belts or sleeves that are used to keep the limb attached. The operation of a prosthetic could be designed in various ways. The prosthetic could be body-powered, externally-powered, or myoelectrically powered. Body-powered prosthetics consist of cables attached to a strap or harness, which is placed on the person's functional shoulder, allowing the person to manipulate and control the prosthetic as he or she deems fit. Externally-powered prosthetics consist of motors to power the prosthetic and buttons and switches to control the prosthetic. Myoelectrically powered prosthetics are new, advanced forms of prosthetics where electrodes are placed on the muscles above the limb. The electrodes will detect the muscle contractions and send electrical signals to the prosthetic to move the prosthetic. The downside to this type of prosthetic is that if the sensors are not placed correctly on the limb then the electrical impulses will fail to move the prosthetic. TrueLimb is a specific brand of prosthetics that uses myoelectrical sensors which enable a person to have control of their bionic limb. ==== Hearing aids ==== Four major components make up the hearing aid: the microphone, the amplifier, the receiver, and the battery. The microphone takes in outside sound, turns that sound to electrical signals, and sends those signals to the amplifier. The amplifier increases the sound and sends that sound to the receiver. The receiver changes the electrical signal back into sound and sends the sound into the ear. Hair cells in the ear will sense the vibrations from the sound, convert the vibrations into nerve signals, and send it to the brain so

    Read more →
  • Face Swap Live

    Face Swap Live

    Face Swap Live is a mobile app created by Laan Labs that enables users to swap faces with another person in real-time using the device's camera. It was released on December 14, 2015. In addition to swapping faces with another person, the app enables users to create videos using a set of bundled live filters. The app is available on iOS and Android devices. Face Swap Live was named Apple's #2 best-selling paid app in 2016.

    Read more →
  • Gapo

    Gapo

    Gapo is a Vietnamese social networking service based in Hanoi, Vietnam. Users are able to create a personal profile and share text, photos and videos with others on the platform. Users can also use Gapo for live streaming, instant messaging, blogging, and online payments. Gapo was launched in July 2019 by Hà Trung Kiên and Duong Vi Khoa. == History == Gapo was founded in response to calls for Vietnam's Communist-led government to produce a domestic alternative to social media giants like Facebook and Google. Gapo officially launched on July 23, 2019 at an event in Hanoi. The company received 500 billion đồng (US$22 million) in funding from technology corporation G-Group to be utilized in the first phase of development. They also partnered with Sony Music Entertainment to provide music content to its services. == Features == Gapo features a news feed for posting content, livestreaming, instant messaging, and blogging. It also allows users to pay online and access public services. == Reception == Within two days of launch, Gapo received about 200,000 registrations. By September 2019, the user base increased to one million. Upon launch, Gapo experienced significant technical difficulties. Users complained about the inability to sign up for a new account and said that certain functions were not available for use at launch. This issue caused Gapo to temporarily suspend their services in order to perform upgrades and bug fixes. Gapo relaunched the next day, though many users reported that the access speed decreased. The mobile app also received mixed reviews from users in both the App Store and the Google Play Store, with an average rating of 3.1 and 3.5, respectively. Most users found the app to be a knockoff of Facebook, although some users praised the app for being locally developed. === Expert opinions on platform viability === Le Hong Hiep of the ISEAS - Yusof Ishak Institute was doubtful that a Vietnamese-owned social network service could be as powerful as a foreign-based service, stating that Vietnam might not be able to develop a viable social media network to compete with the likes of Facebook or Google. Others, like blogger Ann Chi, said that, due to local players complying with local censorship policy, there is a chance that locals might not trust Gapo and other local services in light of possible surveillance. Regarding the targeted user base figure for the end of 2019 and 2021, experts cautioned that the company might need an additional trillion đồng of funding to reach its planned user base targets. In response, the company stated that Gapo was never meant to compete with Facebook, but instead noted that the main difference between Gapo and Facebook is that Gapo provides a personalized user experience through customization. == Censorship == Gapo has the right to censor posts and news that are deemed offensive and inaccurate by users or not approved by the censorship curators.

    Read more →
  • Game Jolt

    Game Jolt

    Game Jolt is a social community platform for video games, gamers and content creators. Founded by Yaprak and David DeCarmine, it is available on iOS, Android, and on the web and as a desktop app for Windows and Linux. Users share interactive content through a variety of formats including images, videos, live streams, chat rooms, and virtual events. == Features == === Crowd streaming === In 2021 Game Jolt revealed their own live streaming feature called Firesides. Firesides allowed multiple users to simultaneously livestream together with nearly no delay. The feature launched with a virtual concert showcasing its ability to accommodate multiple streamers. On October 16, 2023, Firesides were removed from Game Jolt. === Mobile app === Game Jolt Social by Game Jolt Inc. launched on both the Apple App Store and Google Play Store in March 2022. "It's clear to us that Gen Z is tired of generic social media and they want a place specifically for gaming that supports all types of content they're creating–art, videos, thoughts, and livestreams all in one place." said Game Jolt founder and CEO Yaprak DeCarmine, in a statement to VentureBeat. === Game API === The Game Jolt Application Programming Interface (usually known as the Game Jolt Game API) allows any developer using a game development platform that supports HTTP operations and MD5 or SHA-1. Game Jolt advertises that the API can: Create multiple "scoreboards" which collect high scores from players made publicly available on the game's profile and give user accounts EXP Award player's trophies which give user accounts EXP Store game data on Game Jolt's data servers Log whether a user is currently playing a game they're logged into via the GJAPI == Game jams and competitions == Game Jolt regularly hosts game jams where participants are encouraged to develop games for a chance to win prizes. They hosted their first game jam in 2009, Shocking Contest. In November 2014, Game Jolt announced the "Indies vs PewDiePie" game jam, partnering with the popular YouTuber Felix "PewDiePie" Kjellberg. Developers were given a weekend (21–24 November) to create a game with the theme of "fun to play, fun to watch" to suit the Let's Plays entertainment style. Users could rate entries afterwards until December 1 when the scores were counted up. The prize to the top 10 rated games was Felix playing the games on his channel as a means of promotion for the developers, although later he played other entries. One of the participants of the jam, now known as Outerminds Inc. was discovered and hired by PewDiePie to develop his mobile game, Legend of the Brofist. Game Jolt partnered with Felix, Sean "Jacksepticeye" McLoughlin and Mark "Markiplier" Fischbach to host "Indies vs Gamers" in July 2015. The requirements for entries were arcade games using the Game Jolt Game API highscore tables, to be made between the July 17–20 and the top 5 games were played on the partner's YouTube channels. Following the "Indies vs PewDiePie" game jam in 2014, Game Jolt released their internal jam hosting tools public for all users to use as a service, to create their own game jams that integrated with the main site. Today, Game Jolt focuses on hosting and co-hosting game competitions with established brands in order to bring monetary and educational opportunities to their users. On April 15, 2024, an announcement was made about a collaboration with Pocket Worlds for the "HighRise Game Jam". Pocket Worlds had sold NFTs up until roughly 2022, causing a community outburst. The situation was addressed, and the situation started to disperse. == Contests == == Events == Game Jolt hosts both physical and virtual events to entertain and prank its users, which consists of the following: == History == Game Jolt has supported independent creators with a central platform to manage their content and communities since its start in 2003. David DeCarmine began development of Game Jolt at the age of 14 for a group of hobbyists, making games and sharing on forums in an early iteration known as Holo World. The original intention was to create a platform for gamers where new games could be discoverable and quickly playable, and where feedback could be provided directly to the creators, allowing them to continue improving their games. In 2008, Game Jolt was registered as an LLC, then incorporated as Game Jolt Inc. in September 2020. A new site launched in 2015 featuring a responsive design, automated curation for both games and game news articles which weighs how recent a game was uploaded and how popular it is ("hot") and filtering options on game listings for platform, maturity rating and development status. In March 2022, Game Jolt launched a mobile application simultaneously on the Google Play Store and Apple App Store targeted at Gen Z gamers and creators. While in beta, the mobile app had 100,000 installs pre-launch. === Game store === Game Jolt continues to host a large library of independent games. Game developers can upload their games directly to the site to share or sell. They would allow distribution for downloadable games, later adding support for Adobe Flash, Unity and Java games which allowed support for browser based games. In February 2013, Game Jolt built support for browser-based HTML5 games as well. A user levelling system was released into public beta in April 2013, incorporating the GJAPI trophies and highscores, as well as site activity, to generate 'EXP' (experience points). Game Jolt Jams released in early 2014 as a service to allow users to create their own game jams that integrated with the main site. In April 2016, an online marketplace was announced and released the following month with an exclusive set of game titles, including Bendy and the Ink Machine, allowing developers to sell their games on the site. In January 2016, Game Jolt released source code of the client and site's front end on GitHub under MIT license. In January 2022, Game Jolt banned adult games from appearing on the site, stating in an email to developers that the site had become a "social media platform" and they "had to make decisions around the direction and future of the brand which has now included the removal of hosted games with explicitly adult content." In response to a tweet by Itch.io saying the site is not for prudes, they wrote in their own tweet: "Game Jolt is a platform with a large audience of 13-16 year olds. Our users asked us to clean up, so here we are." == Investments == After bootstrapping Game Jolt with revenue earned from ads on the website for years, the DeCarmines secured venture capital in 2020 from SoftBank, doing so again in 2021 from founders of Twitch, Rec Room, Modio and more.

    Read more →
  • Web application firewall

    Web application firewall

    A Web application firewall (WAF) is a specific form of application firewall that filters, monitors, and blocks HTTP traffic to and from a web service. By inspecting HTTP traffic, it can prevent attacks exploiting a Web application's known vulnerabilities, such as SQL injection, cross-site scripting (XSS), file inclusion, and improper system configuration. Financial institutions often utilize WAFs to help in the mitigation of Web application zero-day vulnerabilities, as well as hard-to-patch bugs or weaknesses through custom attack signature strings. == History == Dedicated Web application firewalls entered the market in the late 1990s during a time when web server attacks were becoming more prevalent. Early WAF products, from Kavado and Gilian technologies, tried to solve the increasing amount of attacks on Web applications in the late 1990s. In 2002, the open-source project ModSecurity was formed in order to make WAF technology more accessible. They finalized a core rule set for protecting Web applications, based on OASIS Web Application Security Technical Committee’s (WAS TC) vulnerability work. In 2003, they expanded and standardized rules through the Open Web Application Security Project’s (OWASP) Top 10 List, an annual ranking for Web security vulnerabilities. This list would become the industry standard for Web application security compliance. Since then, the market has continued to grow and evolve, especially focusing on credit card fraud prevention. With the development of the Payment Card Industry Data Security Standard (PCI DSS), a standardization of control over cardholder data, security has become more regulated in this sector. == Description == A Web application firewall is a special type of application firewall that applies specifically to Web applications. It is deployed in front of Web applications and analyzes bi-directional web-based (HTTP) traffic – detecting and blocking anything malicious. The OWASP provides a broad technical definition for a WAF as “a security solution on the Web application level which – from a technical point of view – does not depend on the application itself”. According to the PCI DSS Information Supplement for requirement 6.6, a WAF is defined as “a security policy enforcement point positioned between a Web application and the client endpoint. This functionality can be implemented in software or hardware, running in an appliance device, or in a typical server running a common operating system. It may be a stand-alone device or integrated into other network components.” In other words, a WAF can be a virtual or physical appliance that prevents vulnerabilities in Web applications from being exploited by outside threats. These vulnerabilities may be because the application itself is a legacy type or was insufficiently coded by design. The WAF addresses these code shortcomings by special configurations of rule-sets, also known as policies. Previously unknown vulnerabilities can be discovered through penetration testing or via a vulnerability scanner. A Web application vulnerability scanner, also known as a web application security scanner, is defined in the SAMATE NIST 500-269 as “an automated program that examines Web applications for potential security vulnerabilities. In addition to searching for Web application-specific vulnerabilities, the tools also look for software coding errors.” Resolving vulnerabilities is commonly referred to as remediation. Corrections to the code can be made in the application, but typically a more prompt response is necessary. In these situations, the application of a custom policy for a unique Web application vulnerability to provide a temporary but immediate fix (known as a virtual patch) may be necessary. WAFs are not an ultimate security solution, rather they are meant to be used in conjunction with other network perimeter security solutions such as network firewalls and intrusion prevention systems to provide a holistic defense strategy. WAFs typically follow a positive security model, a negative security, or a combination of both as mentioned by the SANS Institute. WAFs use a combination of rule-based logic, parsing, and signatures to detect and prevent attacks such as cross-site scripting and SQL injection. In general, features like browser emulation, obfuscation and virtualization, and IP obfuscation are used to attempt to bypass WAFs. The OWASP produces a list of the top ten Web application security flaws. All commercial WAF offerings cover these ten flaws at a minimum. There are non-commercial options as well. As mentioned earlier, the well-known open-source WAF engine called ModSecurity is one of these options. A WAF engine alone is insufficient to provide adequate protection, therefore OWASP along with Trustwave's Spiderlabs help organize and maintain a Core-Rule Set via GitHub to use with the ModSecurity WAF engine. == Deployment options == Although the names for operating mode may differ, WAFs are basically deployed inline in three different ways. According to NSS Labs, deployment options are transparent bridge, transparent reverse proxy, and reverse proxy. "Transparent" refers to the fact that the HTTP traffic is sent straight to the Web application, therefore the WAF is transparent between the client and server. This is in contrast to reverse proxy, where the WAF acts as a proxy, and the client’s traffic is sent directly to the WAF. The WAF then separately sends filtered traffic to Web applications. This can provide additional benefits such as IP masking but may introduce disadvantages such as performance latencies. == JA3 fingerprint == JA3, developed by Salesforce in 2017, is a technique for generating a unique fingerprint for SSL/TLS traffic based on specific fields in the handshake, such as the version, cipher suites, and extensions used by the client. This fingerprint enables the identification and tracking of clients based on the characteristics of their encrypted traffic. In the context of distributed denial of service (DDoS) protection, JA3 fingerprints are used to detect and differentiate malicious traffic, often associated with attack bots, from legitimate traffic, allowing for more precise filtering of potential threats. In September 2023, AWS WAF announced built-in support for JA3, enabling customers to inspect the JA3 fingerprints of incoming requests. JA3 was deprecated in May 2025 in favor of JA4. JA4 is currently patent pending.

    Read more →
  • Showbox.com

    Showbox.com

    Showbox is an online video streaming platform that enables users to stream and download many videos, commonly movies and TV shows, for free. == History == The company opened the platforms to users who registered from its beta in late 2015. The platform was officially launched in February 2016, enabling any visitor to sign up and create videos online. In April 2016, Showbox was featured on the Product Hunt website, coming to the top of the website's lists for that day and week with over 1400 upvotes from the Product Hunt community. Also in April 2016, Showbox partnered with YouTube's leading multi-channel networks, including Fullscreen, BroadbandTV, StyleHaul, AwesomenessTV, and BuzzMyVideos, to enable their communities of creators to access the platform. In June 2016, the company launched Showbox For Brands, a business-oriented video creation platform, enabling companies to create video content in-house and with their communities and influencers. In March 2017, the company launched Showbox Engage, a use case of its B2B product launched in 2016, enabling companies to launch user-generated content campaigns with their communities. In April 2017, Showbox and the United Nations announced a partnership around the 70th anniversary of the declaration of human rights, with an annual, ongoing global campaign in 135 languages, inviting people worldwide to create their part of the declaration in a video from anywhere around the world. In November 2017, Showbox partnered with the Ad:tech and Digital Marketing World Forum conferences (DMWF) in New York to provide their users and communities with a User Generated Content video solution. == Technology == Showbox's video creation technology includes an online green screen feature, proprietary computer vision algorithms, deep learning technology to support the automatic creation of videos in the cloud, and advanced video composition, including special effects. == Coverage and awards == In March 2015, Showbox was nominated as one of the 10 Israeli startups to take over our TV screens this year. In July 2016, Showbox won the Publicis90 award as part of Publicis' "global initiative to foster digital entrepreneurship". In March 2017, Showbox was chosen as one of The Culture Trip's 10 startups to watch for in 2017.

    Read more →
  • Imaging

    Imaging

    Imaging is the process of creating visual representations of objects, scenes, or phenomena. The term encompasses both the formation of images through physical processes and the technologies used to capture, store, process, and display them. While traditional imaging relies on visible light, modern imaging systems can visualize information across the electromagnetic spectrum and through other physical phenomena such as sound waves, magnetic fields, and particle emissions, enabling the visualization of subjects invisible to the human eye. Imaging science is the multidisciplinary field concerned with the theoretical foundations and practical applications of image creation and analysis. The field draws on physics, mathematics, electrical engineering, computer science, computer vision, and perceptual psychology to develop systems that generate, collect, duplicate, analyze, modify, and visualize images. == Principles == === The imaging chain === The imaging chain is a conceptual framework describing the interconnected components of any imaging system. Understanding each link in this chain allows engineers and scientists to optimize system performance for specific applications. The chain begins with the subject and its observable properties, typically energy that is emitted, reflected, or transmitted. A light source or other energy source may illuminate the subject to make these properties detectable. The capture device then collects this energy using appropriate sensors: optical systems for electromagnetic radiation, transducers for acoustic waves, or antenna arrays for radio frequencies. In digital systems, a processor converts the captured signals into a format suitable for rendering, applying algorithms for noise reduction, enhancement, or reconstruction. Finally, a display renders the processed information as a visible image on media such as paper, screens, or projection surfaces. Throughout this process, the characteristics of the human visual system inform design decisions, as the ultimate purpose of most imaging systems is to convey information to human observers. === Coherent and non-coherent imaging === Imaging systems are often classified by whether they use coherent or non-coherent illumination. Coherent imaging employs an active source that produces waves with a consistent phase relationship, as in radar, synthetic aperture radar, medical ultrasound, and optical coherence tomography. These systems can capture phase information in addition to amplitude, enabling techniques such as holography and interferometry. Non-coherent imaging systems, including conventional photography, fluorescence microscopy, and telescopes, rely on illumination sources where light waves have random phase relationships. == Methods and applications == Imaging methods span a wide range of physical principles, each suited to particular applications. Optical imaging encompasses photography, cinematography, microscopy, and telescopic observation. These methods capture electromagnetic radiation in or near the visible spectrum and form the basis of most consumer and scientific imaging. Extensions include thermography, which visualizes infrared radiation to reveal temperature distributions, and multispectral imaging, which captures data across multiple wavelength bands for applications in remote sensing and materials analysis. Medical imaging comprises techniques designed to visualize the interior of the human body for diagnostic and therapeutic purposes. Radiography and computed tomography use X-rays to image dense structures such as bone. Magnetic resonance imaging exploits nuclear magnetic properties to produce detailed soft-tissue images without ionizing radiation. Ultrasound imaging uses high-frequency sound waves and is particularly valuable for real-time imaging and fetal monitoring. Nuclear medicine techniques such as positron emission tomography track radioactive tracers to reveal metabolic activity. Emerging modalities include photoacoustic imaging, which combines optical and acoustic principles, and Magneto-acousto-electrical tomography, which maps electrical conductivity in biological tissues. Acoustic imaging uses sound waves to create images. Beyond medical ultrasound, applications include sonar for underwater navigation and mapping, seismic imaging for geological exploration, and industrial non-destructive testing. Radar and microwave imaging employ radio waves to detect and image objects. Synthetic aperture radar produces high-resolution images from aircraft or satellites regardless of weather or lighting conditions, making it essential for Earth observation and reconnaissance. Ground-penetrating radar images subsurface structures for archaeological and engineering applications. Electron and particle imaging use beams of electrons or other particles to achieve resolutions far beyond the diffraction limit of visible light. Electron microscopes can image individual atoms, enabling advances in materials science and structural biology. Chemical imaging combines spectroscopy with spatial imaging to map the chemical composition of samples, with applications in pharmaceutical development, food safety, and forensics. LIDAR (Light Detection and Ranging) measures distances using laser pulses to create three-dimensional representations of surfaces and objects, widely used in autonomous vehicles, topographic mapping, and forestry. Computational and digital imaging encompasses image processing, computer graphics, three-dimensional rendering, and digital image restoration. Computer vision applies algorithmic analysis to extract information from images automatically. == History == Photography and imaging have always been intertwined. When Joseph Nicéphore Niépce created the first permanent photograph using heliography in 1826, and Louis Daguerre refined the process into the daguerreotype a decade later, they weren't just inventing a new art form, they were laying the groundwork for an entire scientific discipline built on silver halide chemistry. For most of the nineteenth century, photography remained the province of specialists. That changed with George Eastman's Kodak camera, introduced in 1888 with the slogan "You press the button, we do the rest." Suddenly, anyone could take pictures. Around the same time, Wilhelm Röntgen stumbled onto X-rays in 1895, an accident that would spawn the entire field of medical imaging. World War II proved to be a turning point. Radar technology, developed frantically on both sides of the conflict, introduced concepts that engineers would later adapt for synthetic aperture radar and medical ultrasound. Then the charge-coupled device came: Willard Boyle and George E. Smith built the first one at Bell Labs in 1969, and within a few decades it had made film nearly obsolete. Magnetic resonance imaging arrived in the 1970s, offering doctors something X-rays never could, detailed views of soft tissue without any radiation. Digital cameras took over fast. By the 2000s, film was already in decline; by the 2010s, smartphones had put a surprisingly capable camera in nearly every pocket. Features that once required real skill, proper exposure, sharp focus, accurate color, became automatic. Today, billions of photos get uploaded to social media every day. As a result, a growing issue is that generative artificial intelligence can fabricate photorealistic images from scratch. What counts as a "real" photograph is no longer necessarily obvious.

    Read more →
  • Cyborg

    Cyborg

    A cyborg () is a being with both organic and biomechatronic body parts. It is a portmanteau of cybernetic and organism. The term was coined in 1960 by Manfred Clynes and Nathan S. Kline. In contrast to biorobots and androids, the term cyborg applies to a living organism that has undergone restoration of function or enhancements of abilities due to the integration of some artificial component or technology that relies on feedback. == Description and definition == Alternative names for a cyborg include cybernetic organism, cyber-organism, cyber-organic being, cybernetically enhanced organism, cybernetically augmented organism, technorganic being, techno-organic being, and techno-organism. Unlike bionics, biorobotics, or androids, a cyborg is an organism that has restored function or, especially, enhanced abilities due to the integration of some artificial component or technology that relies on some sort of feedback, for example: prostheses, artificial organs, implants or, in some cases, wearable technology. Cyborg technologies may enable or support collective intelligence. A related idea is the "augmented human". While cyborgs are commonly thought of as mammals, including humans, the term can apply to any organism. === Placement and distinctions === D. S. Halacy's Cyborg: Evolution of the Superman (1965) featured an introduction which spoke of a "new frontier" that was "not merely space, but more profoundly the relationship between 'inner space' to 'outer space' – a bridge...between mind and matter." In "A Cyborg Manifesto", Donna Haraway rejects the notion of rigid boundaries between humanity and technology, arguing that, as humans depend on more technology over time, humanity and technology have become too interwoven to draw lines between them. She believes that since we have allowed and created machines and technology to be so advanced, there should be no reason to fear what we have created, and cyborgs should be embraced because they are part of human identities. However, Haraway has also expressed concern over the contradictions of scientific objectivity and the ethics of technological evolution, and has argued that "There are political consequences to scientific accounts of the world." === Biosocial definition === According to some definitions of the term, the physical attachments that humans have with even the most basic technologies have already made them cyborgs. In a typical example, a human with an artificial cardiac pacemaker or implantable cardioverter-defibrillator would be considered a cyborg, since these devices measure voltage potentials in the body, perform signal processing, and can deliver electrical stimuli, using a synthetic feedback mechanism to keep that person alive. Implants, especially cochlear implants, that combine mechanical modification with any kind of feedback response are also cybernetic enhancements. Some theorists cite such modifications as contact lenses, hearing aids, smartphones, or intraocular lenses as examples of fitting humans with technology to enhance their biological capabilities. The emerging trend of implanting microchips inside the body (mainly the hands), to make financial operations like a contactless payment, or basic tasks like opening a door, has been erroneously marketed as more recent examples of cybernetic enhancement. The latter has not yet seen significant traction outside niche areas in Scandinavia and in actual function is little more than a pre-programmed Radio-frequency identification (RFID) microchip encased in glass that does not interact with the human body (it is the same technology used in the microchips injected into animals for ease of identification), thus not fitting the definition of a cybernetic implant. As cyborgs currently are on the rise, some theorists argue there is a need to develop new definitions of aging. For instance, a bio-techno-social definition of aging has been suggested. The term is also used to address human-technology mixtures in the abstract. This includes not only commonly used pieces of technology such as phones, computers, the Internet, and so on, but also artifacts that are not usually considered technology; for example, pen and paper, and speech and language. When augmented with these technologies and connected in communication with people in other times and places, a person becomes capable of more than they were before. An example is a computer, which gains power by using Internet protocols to connect with other computers. Another example is a social-media bot—either a bot-assisted human or a human-assisted-bot—used to target social media with likes and shares. Cybernetic technologies thus include highways, pipes, electrical wiring, buildings, electrical plants, libraries, and other infrastructural constructs. Bruce Sterling, in his Shaper/Mechanist universe, suggested an idea of an alternative cyborg called 'Lobster', which is made not by using internal implants, but by using an external shell (e.g. a powered exoskeleton). The computer game Deus Ex: Invisible War prominently features cyborgs called Omar, Russian for 'lobster'. === Evolutionary perspective === In 1994, Hans Hass formulated a scientific view of the human-machine hybrids he called "hypercells". They can expand their biological cell body with artificial artifacts and thus expand their performance body. The theory of hypercells or Homo proteus, as Hass called the human-machine hybrid to distinguish Homo sapiens, extends Charles Darwin's theory of evolution and deals with the course of evolution beyond humans. In his 2019 book Novacene, James Lovelock used the term "cyborgs" to refer to the next generation of beings who will become the "understanders of the future" and "lead the cosmos to self-knowledge". While acknowledging the organic component in Clynes' and Kline's definition, he proposed that these cyborgs "will have designed and built themselves from the artificial intelligence systems we have already constructed", and used the term cyborg "to emphasize that the new intelligent beings will have arisen, like us, from Darwinian evolution." == Origins == The concept of a man-machine mixture was widespread in science fiction before World War II. As early as 1843, Edgar Allan Poe described a man with extensive prostheses in the short story "The Man That Was Used Up". In 1911, Jean de La Hire introduced the Nyctalope, a science fiction hero who was perhaps the first literary cyborg, in Le Mystère des XV (later translated as The Nyctalope on Mars). Nearly two decades later, Edmond Hamilton presented space explorers with a mixture of organic and machine parts in his 1928 novel The Comet Doom. He later featured the talking, living brain of an old scientist, Simon Wright, floating in a transparent case, and in all the adventures of his famous hero, Captain Future. In 1944, in the short story "No Woman Born", C. L. Moore wrote of Deirdre, a dancer, whose body was burned completely and whose brain was placed in a faceless but beautiful and supple mechanical body. In 1960, the term "cyborg" was coined by Manfred E. Clynes and Nathan S. Kline to refer to their conception of an enhanced human being who could survive in extraterrestrial environments: For the exogenously extended organizational complex functioning as an integrated homeostatic system unconsciously, we propose the term 'Cyborg'. Their concept was the outcome of thinking about the need for an intimate relationship between human and machine as the new frontier of space exploration was beginning to develop. A designer of physiological instrumentation and electronic data-processing systems, Clynes was the chief research scientist in the Dynamic Simulation Laboratory at Rockland State Hospital in New York. The term first appears in print 5 months earlier when The New York Times reported on the "Psychophysiological Aspects of Space Flight Symposium" where Clynes and Kline first presented their paper: A cyborg is essentially a man-machine system in which the control mechanisms of the human portion are modified externally by drugs or regulatory devices so that the being can live in an environment different from the normal one. Thereafter, Hamilton would first use the term "cyborg" explicitly in the 1962 short story, "After a Judgment Day", to describe the "mechanical analogs" called "Charlies," explaining that "[c]yborgs, they had been called from the first one in the 1960s...cybernetic organisms." The 1972 novel Cyborg by Martin Caidin introduced the character of bionic government agent Steve Austin, and was adapted into the popular television series The Six Million Dollar Man, which ran from 1973 to 1978. In 2001, a book titled Cyborg: Digital Destiny and Human Possibility in the Age of the Wearable computer was published by Doubleday. Some of the ideas in the book were incorporated into the documentary film Cyberman that same year. == Cyborg tissues in engineering == Cyborg tissues structured with carbon nanotubes and plan

    Read more →
  • RFinder

    RFinder

    RFinder ("repeater finder") is a subscription-based website and mobile app. RFinder's main service is the World Wide Repeater Directory (WWRD), which is a directory of amateur radio repeaters. RFinder is the official repeater directory of several amateur radio associations. RFinder has listings for several amateur radio modes, including FM, D-STAR, DMR, and ATV. == World Wide Repeater Directory == Repeaters are listed in the directory along with its call sign, Maidenhead Locator System and GPS coordinates, transmit/receive offset ("split"), CTCSS and DCS squelch settings, and VoIP settings (IRLP and Echolink nodes). The directory has over 50,000 repeater listings in over 170 countries. === Website === The RFinder website has several search options including for routes. === Forums === RFinder user forums is for help and support for the app and hardware. === Mobile app === RFinder has mobile apps for Android and iOS. When using the mobile app, RFinder can display the distance to repeaters, based on the mobile device's current location. === ARRL Repeater Directory === The ARRL publishes the ARRL Repeater Directory which contains over 31,000 repeater listings for the US and Canada with listings provided by RFinder. == Subscription == RFinder requires a subscription. A one-year subscription is US$12.99. == Radio programming software == Some radio programming software applications can query RFinder and download repeater listing to program radios. Compatible software includes: CHIRP RT Systems == Radio associations == RFinder is the official repeater directory of the following associations: Amateur Radio Society Italy American Radio Relay League Cayman Amateur Radio Society Deutscher Amateur Radio Club Federacion Mexicana de Radio Experimentadores L’association Réseau des Émetteurs Français Lietuvos Radijo Mėgėjų Draugija Liga de Amadores Brasilieros de Radio Emissão Radio Amateurs of Canada Radio Society of Great Britain Rede dos Emissores Portugueses Unión de Radioaficionados Españoles

    Read more →
  • The Triple Revolution

    The Triple Revolution

    "The Triple Revolution" was an open memorandum sent to U.S. President Lyndon B. Johnson and other government figures on March 22, 1964. It concerned three megatrends of the time: increasing use of automation, the nuclear arms race, and advancements in human rights. Drafted under the auspices of the Center for the Study of Democratic Institutions, it was signed by an array of noted social activists, professors, and technologists who identified themselves as the Ad Hoc Committee on the Triple Revolution. The chief initiator of the proposal was W. H. "Ping" Ferry, at that time a vice-president of CSDI, basing it in large part on the ideas of the futurist Robert Theobald. == Overview == The statement identified three revolutions underway in the world: the cybernation revolution of increasing automation; the weaponry revolution of mutually assured destruction; and the human rights revolution. It discussed primarily the cybernation revolution. The committee claimed that machines would usher in "a system of almost unlimited productive capacity" while continually reducing the number of manual laborers needed, and increasing the skill needed to work, thereby producing increasing levels of unemployment. It proposed that the government should ease this transformation through large-scale public works, low-cost housing, public transit, electrical power development, income redistribution, union representation for the unemployed, and government restraint on technology deployment. == Legacy == Martin Luther King Jr.'s final Sunday sermon, delivered six days before his April 1968 assassination, explicitly references the thesis of "The Triple Revolution": There can be no gainsaying of the fact that a great revolution is taking place in the world today. In a sense it is a triple revolution: that is, a technological revolution, with the impact of automation and cybernation; then there is a revolution in weaponry, with the emergence of atomic and nuclear weapons of warfare; then there is a human rights revolution, with the freedom explosion that is taking place all over the world. Yes, we do live in a period where changes are taking place. And there is still the voice crying through the vista of time saying, "Behold, I make all things new; former things are passed away." In Harlan Ellison's 1967 anthology Dangerous Visions, Philip José Farmer's story "Riders of the Purple Wage" uses the Triple Revolution document as the premise of a future society, in which the "purple wage" of the title is a guaranteed income dole on which most of the population lives. At the 1968 World Science Fiction Convention in San Francisco, Farmer delivered a lengthy Guest of Honor speech in which he called for the founding of a grassroots activist organization called REAP which would work for implementation of the Ad Hoc Committee's recommendations. Looking back on the proposal in his 2008 book, Daniel Bell wrote: "the cybernetic revolution quickly proved to be illusory. There were no spectacular jumps in productivity. ... Cybernation had proved to be one more instance of the penchant for overdramatizing a momentary innovation and blowing it up far out of proportion to its actuality. ... The image of a completely automated production economy—with an endless capacity to turn out goods—was simply a social-science fiction of the early 1960s. Paradoxically, the vision of Utopia was suddenly replaced by the spectre of Doomsday. In place of the early-sixties theme of endless plenty, the picture by the end of the decade was one of a fragile planet of limited resources whose finite stocks were being rapidly depleted, and whose wastes from soaring industrial production were polluting the air and waters." In his 2015 book Rise of the Robots, Martin Ford claims The Triple Revolution's predictions of steady decline in future employment were not wrong, but rather premature. He cites "Seven Deadly Trends" that began in the 1970s-1980s and by the mid-2010s appeared set to continue: Stagnation in real wages Decline in labor's share of national income in many countries (breakdown of Bowley's law), while corporate profits increased Declining labor force participation Diminishing job creation, lengthening jobless recoveries, and soaring long-term unemployment Rising inequality Declining incomes, and underemployment for recent college graduates Polarization and part-time jobs (middle-class jobs are disappearing, to be replaced by a small number of high-paying jobs and large number of low-paying jobs) According to Ford, the 1960s were part of what in retrospect seems like a golden age for labor in the United States, when productivity and wages rose together in near lockstep, and unemployment was low. But after about 1980, wages began stagnating while productivity continued to rise. Labor's share of the economic output began to decline. Ford describes the role that automation and information technology play in these trends, and how new technologies including narrow AI threaten to destroy jobs faster than displaced workers can be retrained for new jobs, before automation takes the new jobs as well. This includes many job categories, such as in transportation, that were never threatened by automation before. According to a 2013 study, about 47% of US jobs are susceptible to automation. == Signatories ==

    Read more →
  • Multiple buffering

    Multiple buffering

    In computer science, multiple buffering is the use of more than one buffer to hold a block of data, so that a "reader" will see a complete (though perhaps old) version of the data instead of a partially updated version of the data being created by a "writer". It is very commonly used for computer display images. It is also used to avoid the need to use dual-ported RAM (DPRAM) when the readers and writers are different devices. == Description == === Double buffering Petri net === The Petri net in the illustration shows double buffering. Transitions W1 and W2 represent writing to buffer 1 and 2 respectively while R1 and R2 represent reading from buffer 1 and 2 respectively. At the beginning, only the transition W1 is enabled. After W1 fires, R1 and W2 are both enabled and can proceed in parallel. When they finish, R2 and W1 proceed in parallel and so on. After the initial transient where W1 fires alone, this system is periodic and the transitions are enabled – always in pairs (R1 with W2 and R2 with W1 respectively). == Double buffering in computer graphics == In computer graphics, double buffering is a technique for drawing graphics that shows less stutter, tearing, and other artifacts. It is difficult for a program to draw a display so that pixels do not change more than once. For instance, when updating a page of text, it is much easier to clear the entire page and then draw the letters than to somehow erase only the pixels that are used in old letters but not in new ones. However, this intermediate image is seen by the user as flickering. In addition, computer monitors constantly redraw the visible video page (traditionally at around 60 times a second), so even a perfect update may be visible momentarily as a horizontal divider between the "new" image and the un-redrawn "old" image, known as tearing. === Software double buffering === A software implementation of double buffering has all drawing operations store their results in some region of system RAM; any such region is often called a "back buffer". When all drawing operations are considered complete, the whole region (or only the changed portion) is copied into the video RAM (the "front buffer"); this copying is usually synchronized with the monitor's raster beam in order to avoid tearing. Software implementations of double buffering necessarily require more memory and CPU time than single buffering because of the system memory allocated for the back buffer, the time for the copy operation, and the time waiting for synchronization. Compositing window managers often combine the "copying" operation with "compositing" used to position windows, transform them with scale or warping effects, and make portions transparent. Thus, the "front buffer" may contain only the composite image seen on the screen, while there is a different "back buffer" for every window containing the non-composited image of the entire window contents. === Page flipping === In the page-flip method, instead of copying the data, both buffers are capable of being displayed. At any one time, one buffer is actively being displayed by the monitor, while the other, background buffer is being drawn. When the background buffer is complete, the roles of the two are switched. The page-flip is typically accomplished by modifying a hardware register in the video display controller—the value of a pointer to the beginning of the display data in the video memory. The page-flip is much faster than copying the data and can guarantee that tearing will not be seen as long as the pages are switched over during the monitor's vertical blanking interval—the blank period when no video data is being drawn. The currently active and visible buffer is called the front buffer, while the background page is called the back buffer. == Triple buffering == In computer graphics, triple buffering is similar to double buffering but can provide improved performance. In double buffering, the program must wait until the finished drawing is copied or swapped before starting the next drawing. This waiting period could be several milliseconds during which neither buffer can be touched. In triple buffering, the program has two back buffers and can immediately start drawing in the one that is not involved in such copying. The third buffer, the front buffer, is read by the graphics card to display the image on the monitor. Once the image has been sent to the monitor, the front buffer is flipped with (or copied from) the back buffer holding the most recent complete image. Since one of the back buffers is always complete, the graphics card never has to wait for the software to complete. Consequently, the software and the graphics card are completely independent and can run at their own pace. Finally, the displayed image was started without waiting for synchronization and thus with minimum lag. Due to the software algorithm not polling the graphics hardware for monitor refresh events, the algorithm may continuously draw additional frames as fast as the hardware can render them. For frames that are completed much faster than interval between refreshes, it is possible to replace a back buffers' frames with newer iterations multiple times before copying. This means frames may be written to the back buffer that are never used at all before being overwritten by successive frames. Nvidia has implemented this method under the name "Fast Sync". An alternative method sometimes referred to as triple buffering is a swap chain three buffers long. After the program has drawn both back buffers, it waits until the first one is placed on the screen, before drawing another back buffer (i.e. it is a 3-long first in, first out queue). Most Windows games seem to refer to this method when enabling triple buffering. == Quad buffering == The term quad buffering is the use of double buffering for each of the left and right eye images in stereoscopic implementations, thus four buffers total (if triple buffering was used then there would be six buffers). The command to swap or copy the buffer typically applies to both pairs at once, so at no time does one eye see an older image than the other eye. Quad buffering requires special support in the graphics card drivers which is disabled for most consumer cards. AMD's Radeon HD 6000 Series and newer support it. 3D standards like OpenGL and Direct3D support quad buffering. == Double buffering for DMA == The term double buffering is used for copying data between two buffers for direct memory access (DMA) transfers, not for enhancing performance, but to meet specific addressing requirements of a device (particularly 32-bit devices on systems with wider addressing provided via Physical Address Extension). Windows device drivers are a place where the term "double buffering" is likely to be used. Linux and BSD source code calls these "bounce buffers". Some programmers try to avoid this kind of double buffering with zero-copy techniques. == Other uses == Double buffering is also used as a technique to facilitate interlacing or deinterlacing of video signals.

    Read more →