AI Code Update

AI Code Update — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Inductive bias

  The inductive bias (also known as learning bias) of a learning algorithm is the set of assumptions that the learner uses to predict outputs of given inputs that it has not encountered. Inductive bias is anything which makes the algorithm learn one pattern instead of another pattern (e.g., step-functions in decision trees instead of continuous functions in linear regression models). Learning involves searching a space of solutions for a solution that provides a good explanation of the data. However, in many cases, there may be multiple equally appropriate solutions. An inductive bias allows a learning algorithm to prioritize one solution (or interpretation) over another, independently of the observed data. In machine learning, the aim is to construct algorithms that are able to learn to predict a certain target output. To achieve this, the learning algorithm is presented some training examples that demonstrate the intended relation of input and output values. Then the learner is supposed to approximate the correct output, even for examples that have not been shown during training. Without any additional assumptions, this problem cannot be solved since unseen situations might have an arbitrary output value. The kind of necessary assumptions about the nature of the target function are subsumed in the phrase inductive bias. A classical example of an inductive bias is Occam's razor, assuming that the simplest consistent hypothesis about the target function is actually the best. Here, consistent means that the hypothesis of the learner yields correct outputs for all of the examples that have been given to the algorithm. Approaches to a more formal definition of inductive bias are based on mathematical logic. Here, the inductive bias is a logical formula that, together with the training data, logically entails the hypothesis generated by the learner. However, this strict formalism fails in many practical cases in which the inductive bias can only be given as a rough description (e.g., in the case of artificial neural networks), or not at all. == Types == The following is a list of common inductive biases in machine learning algorithms. Maximum conditional independence: if the hypothesis can be cast in a Bayesian framework, try to maximize conditional independence. This is the bias used in the Naive Bayes classifier. Minimum cross-validation error: when trying to choose among hypotheses, select the hypothesis with the lowest cross-validation error. Although cross-validation may seem to be free of bias, the "no free lunch" theorems show that cross-validation must be biased, for example assuming that there is no information encoded in the ordering of the data. Maximum margin: when drawing a boundary between two classes, attempt to maximize the width of the boundary. This is the bias used in support vector machines. The assumption is that distinct classes tend to be separated by wide boundaries. Minimum description length: when forming a hypothesis, attempt to minimize the length of the description of the hypothesis. Minimum features: unless there is good evidence that a feature is useful, it should be deleted. This is the assumption behind feature selection algorithms. Nearest neighbors: assume that most of the cases in a small neighborhood in feature space belong to the same class. Given a case for which the class is unknown, guess that it belongs to the same class as the majority in its immediate neighborhood. This is the bias used in the k-nearest neighbors algorithm. The assumption is that cases that are near each other tend to belong to the same class. == Shift of bias == Although most learning algorithms have a static bias, some algorithms are designed to shift their bias as they acquire more data. This does not avoid bias, since the bias shifting process itself must have a bias.

  Read more →
• 

  Margin classifier

  In machine learning (ML), a margin classifier is a type of classification model which is able to give an associated distance from the decision boundary for each data sample. For instance, if a linear classifier is used, the distance (typically Euclidean, though others may be used) of a sample from the separating hyperplane is the margin of that sample. The notion of margins is important in several ML classification algorithms, as it can be used to bound the generalization error of these classifiers. These bounds are frequently shown using the VC dimension. The generalization error bound in boosting algorithms and support vector machines is particularly prominent. == Margin for boosting algorithms == The margin for an iterative boosting algorithm given a dataset with two classes can be defined as follows: the classifier is given a sample pair ( x , y ) {\displaystyle (x,y)} , where x ∈ X {\displaystyle x\in X} is a domain space and y ∈ Y = { − 1 , + 1 } {\displaystyle y\in Y=\{-1,+1\}} is the sample's label. The algorithm then selects a classifier h j ∈ C {\displaystyle h_{j}\in C} at each iteration j {\displaystyle j} where C {\displaystyle C} is a space of possible classifiers that predict real values. This hypothesis is then weighted by α j ∈ R {\displaystyle \alpha _{j}\in R} as selected by the boosting algorithm. At iteration t {\displaystyle t} , the margin of a sample x {\displaystyle x} can thus be defined as y ∑ j t α j h j ( x ) ∑ | α j | . {\displaystyle {\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}.} By this definition, the margin is positive if the sample is labeled correctly, or negative if the sample is labeled incorrectly. This definition may be modified and is not the only way to define the margin for boosting algorithms. However, there are reasons why this definition may be appealing. == Examples of margin-based algorithms == Many classifiers can give an associated margin for each sample. However, only some classifiers utilize information of the margin while learning from a dataset. Many boosting algorithms rely on the notion of a margin to assign weight to samples. If a convex loss is utilized (as in AdaBoost or LogitBoost, for instance) then a sample with a higher margin will receive less (or equal) weight than a sample with a lower margin. This leads the boosting algorithm to focus weight on low-margin samples. In non-convex algorithms (e.g., BrownBoost), the margin still dictates the weighting of a sample, though the weighting is non-monotone with respect to the margin. == Generalization error bounds == One theoretical motivation behind margin classifiers is that their generalization error may be bound by the algorithm parameters and a margin term. An example of such a bound is for the AdaBoost algorithm. Let S {\displaystyle S} be a set of m {\displaystyle m} data points, sampled independently at random from a distribution D {\displaystyle D} . Assume the VC-dimension of the underlying base classifier is d {\displaystyle d} and m ≥ d ≥ 1 {\displaystyle m\geq d\geq 1} . Then, with probability 1 − δ {\displaystyle 1-\delta } , we have the bound: P D ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ 0 ) ≤ P S ( y ∑ j t α j h j ( x ) ∑ | α j | ≤ θ ) + O ( 1 m d log 2 ⁡ ( m / d ) / θ 2 + log ⁡ ( 1 / δ ) ) {\displaystyle P_{D}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq 0\right)\leq P_{S}\left({\frac {y\sum _{j}^{t}\alpha _{j}h_{j}(x)}{\sum |\alpha _{j}|}}\leq \theta \right)+O\left({\frac {1}{\sqrt {m}}}{\sqrt {d\log ^{2}(m/d)/\theta ^{2}+\log(1/\delta )}}\right)} for all θ > 0 {\displaystyle \theta >0} .

  Read more →
• 

  Bayesian network

  A Bayesian network (also known as a Bayes network, Bayes net, belief network, or decision network) is a probabilistic graphical model that represents a set of variables and their conditional dependencies via a directed acyclic graph (DAG). While it is one of several forms of causal notation, causal networks are special cases of Bayesian networks. Bayesian networks are ideal for taking an event that occurred and predicting the likelihood that any one of several possible known causes was the contributing factor. For example, a Bayesian network could represent the probabilistic relationships between diseases and symptoms. Given symptoms, the network can be used to compute the probabilities of the presence of various diseases. Efficient algorithms can perform inference and learning in Bayesian networks. Bayesian networks that model sequences of variables (e.g. speech signals or protein sequences) are called dynamic Bayesian networks. Generalizations of Bayesian networks that can represent and solve decision problems under uncertainty are called influence diagrams. == Graphical model == Formally, Bayesian networks are directed acyclic graphs (DAGs) whose nodes represent variables in the Bayesian sense: they may be observable quantities, latent variables, unknown parameters or hypotheses. Each edge represents a direct conditional dependency. Any pair of nodes that are not connected (i.e. no path connects one node to the other) represent variables that are conditionally independent of each other. Each node is associated with a probability function that takes, as input, a particular set of values for the node's parent variables, and gives (as output) the probability (or probability distribution, if applicable) of the variable represented by the node. For example, if m {\displaystyle m} parent nodes represent m {\displaystyle m} Boolean variables, then the probability function could be represented by a table of 2 m {\displaystyle 2^{m}} entries, one entry for each of the 2 m {\displaystyle 2^{m}} possible parent combinations. Similar ideas may be applied to undirected, and possibly cyclic, graphs such as Markov networks. == Example == Suppose we want to model the dependencies between three variables: the sprinkler (or more appropriately, its state - whether it is on or not), the presence or absence of rain and whether the grass is wet or not. Observe that two events can cause the grass to become wet: an active sprinkler or rain. Rain has a direct effect on the use of the sprinkler (namely that when it rains, the sprinkler usually is not active). This situation can be modeled with a Bayesian network (shown to the right). Each variable has two possible values, T (for true) and F (for false). The joint probability function is, by the chain rule of probability, Pr ( G , S , R ) = Pr ( G ∣ S , R ) Pr ( S ∣ R ) Pr ( R ) {\displaystyle \Pr(G,S,R)=\Pr(G\mid S,R)\Pr(S\mid R)\Pr(R)} where G = "Grass wet (true/false)", S = "Sprinkler turned on (true/false)", and R = "Raining (true/false)". The model can answer questions about the presence of a cause given the presence of an effect (so-called inverse probability) like "What is the probability that it is raining, given the grass is wet?" by using the conditional probability formula and summing over all nuisance variables: Pr ( R = T ∣ G = T ) = Pr ( G = T , R = T ) Pr ( G = T ) = ∑ x ∈ { T , F } Pr ( G = T , S = x , R = T ) ∑ x , y ∈ { T , F } Pr ( G = T , S = x , R = y ) {\displaystyle \Pr(R=T\mid G=T)={\frac {\Pr(G=T,R=T)}{\Pr(G=T)}}={\frac {\sum _{x\in \{T,F\}}\Pr(G=T,S=x,R=T)}{\sum _{x,y\in \{T,F\}}\Pr(G=T,S=x,R=y)}}} Using the expansion for the joint probability function Pr ( G , S , R ) {\displaystyle \Pr(G,S,R)} and the conditional probabilities from the conditional probability tables (CPTs) stated in the diagram, one can evaluate each term in the sums in the numerator and denominator. For example, Pr ( G = T , S = T , R = T ) = Pr ( G = T ∣ S = T , R = T ) Pr ( S = T ∣ R = T ) Pr ( R = T ) = 0.99 × 0.01 × 0.2 = 0.00198. {\displaystyle {\begin{aligned}\Pr(G=T,S=T,R=T)&=\Pr(G=T\mid S=T,R=T)\Pr(S=T\mid R=T)\Pr(R=T)\\&=0.99\times 0.01\times 0.2\\&=0.00198.\end{aligned}}} Then the numerical results (subscripted by the associated variable values) are Pr ( R = T ∣ G = T ) = 0.00198 T T T + 0.1584 T F T 0.00198 T T T + 0.288 T T F + 0.1584 T F T + 0.0 T F F = 891 2491 ≈ 35.77 % . {\displaystyle \Pr(R=T\mid G=T)={\frac {0.00198_{TTT}+0.1584_{TFT}}{0.00198_{TTT}+0.288_{TTF}+0.1584_{TFT}+0.0_{TFF}}}={\frac {891}{2491}}\approx 35.77\%.} To answer an interventional question, such as "What is the probability that it would rain, given that we wet the grass?" the answer is governed by the post-intervention joint distribution function Pr ( S , R ∣ do ( G = T ) ) = Pr ( S ∣ R ) Pr ( R ) {\displaystyle \Pr(S,R\mid {\text{do}}(G=T))=\Pr(S\mid R)\Pr(R)} obtained by removing the factor Pr ( G ∣ S , R ) {\displaystyle \Pr(G\mid S,R)} from the pre-intervention distribution. The do operator forces the value of G to be true. The probability of rain is unaffected by the action: Pr ( R ∣ do ( G = T ) ) = Pr ( R ) . {\displaystyle \Pr(R\mid {\text{do}}(G=T))=\Pr(R).} To predict the impact of turning the sprinkler on: Pr ( R , G ∣ do ( S = T ) ) = Pr ( R ) Pr ( G ∣ R , S = T ) {\displaystyle \Pr(R,G\mid {\text{do}}(S=T))=\Pr(R)\Pr(G\mid R,S=T)} with the term Pr ( S = T ∣ R ) {\displaystyle \Pr(S=T\mid R)} removed, showing that the action affects the grass but not the rain. These predictions may not be feasible given unobserved variables, as in most policy evaluation problems. The effect of the action do ( x ) {\displaystyle {\text{do}}(x)} can still be predicted, however, whenever the back-door criterion is satisfied. It states that, if a set Z of nodes can be observed that d-separates (or blocks) all back-door paths from X to Y then Pr ( Y , Z ∣ do ( x ) ) = Pr ( Y , Z , X = x ) Pr ( X = x ∣ Z ) . {\displaystyle \Pr(Y,Z\mid {\text{do}}(x))={\frac {\Pr(Y,Z,X=x)}{\Pr(X=x\mid Z)}}.} A back-door path is one that ends with an arrow into X. Sets that satisfy the back-door criterion are called "sufficient" or "admissible." For example, the set Z = R is admissible for predicting the effect of S = T on G, because R d-separates the (only) back-door path S ← R → G. However, if S is not observed, no other set d-separates this path and the effect of turning the sprinkler on (S = T) on the grass (G) cannot be predicted from passive observations. In that case P(G | do(S = T)) is not "identified". This reflects the fact that, lacking interventional data, the observed dependence between S and G is due to a causal connection or is spurious (apparent dependence arising from a common cause, R). (see Simpson's paradox) To determine whether a causal relation is identified from an arbitrary Bayesian network with unobserved variables, one can use the three rules of "do-calculus" and test whether all do terms can be removed from the expression of that relation, thus confirming that the desired quantity is estimable from frequency data. Using a Bayesian network can save considerable amounts of memory over exhaustive probability tables, if the dependencies in the joint distribution are sparse. For example, a naive way of storing the conditional probabilities of 10 two-valued variables as a table requires storage space for 2 10 = 1024 {\displaystyle 2^{10}=1024} values. If no variable's local distribution depends on more than three parent variables, the Bayesian network representation stores at most 10 ⋅ 2 3 = 80 {\displaystyle 10\cdot 2^{3}=80} values. One advantage of Bayesian networks is that it is intuitively easier for a human to understand (a sparse set of) direct dependencies and local distributions than complete joint distributions. == Inference and learning == Bayesian networks perform three main inference tasks: Inferring unobserved variables Parameter learning for the probability distributions of each node in the network Structure learning of the graphical network === Inferring unobserved variables === Because a Bayesian network is a complete model for its variables and their relationships, it can be used to answer probabilistic queries about them. For example, the network can be used to update knowledge of the state of a subset of variables when other variables (the evidence variables) are observed. This process of computing the posterior distribution of variables given evidence is called probabilistic inference. The posterior gives a universal sufficient statistic for detection applications, when choosing values for the variable subset that minimize some expected loss function, for instance the probability of decision error. A Bayesian network can thus be considered a mechanism for automatically applying Bayes' theorem to complex problems. The most common exact inference methods are: variable elimination, which eliminates (by integration or summation) the non-observed non-query variables one by one by distributing the sum over the prod

  Read more →
• 

  Modern Hopfield network

  Modern Hopfield networks (also known as Dense Associative Memories) are generalizations of the classical Hopfield networks that break the linear scaling relationship between the number of input features and the number of stored memories. This is achieved by introducing stronger non-linearities (either in the energy function or neurons’ activation functions) leading to super-linear (even an exponential) memory storage capacity as a function of the number of feature neurons. The network still requires a sufficient number of hidden neurons. The key theoretical idea behind the modern Hopfield networks is to use an energy function and an update rule that is more sharply peaked around the stored memories in the space of neuron’s configurations compared to the classical Hopfield network. == Classical Hopfield networks == Hopfield networks are recurrent neural networks with dynamical trajectories converging to fixed point attractor states and described by an energy function. The state of each model neuron i {\textstyle i} is defined by a time-dependent variable V i {\displaystyle V_{i}} , which can be chosen to be either discrete or continuous. A complete model describes the mathematics of how the future state of activity of each neuron depends on the known present or previous activity of all the neurons. In the original Hopfield model of associative memory, the variables were binary, and the dynamics were described by a one-at-a-time update of the state of the neurons. An energy function quadratic in the V i {\displaystyle V_{i}} was defined, and the dynamics consisted of changing the activity of each single neuron i {\displaystyle i} only if doing so would lower the total energy of the system. This same idea was extended to the case of V i {\displaystyle V_{i}} being a continuous variable representing the output of neuron i {\displaystyle i} , and V i {\displaystyle V_{i}} being a monotonic function of an input current. The dynamics became expressed as a set of first-order differential equations for which the "energy" of the system always decreased. The energy in the continuous case has one term which is quadratic in the V i {\displaystyle V_{i}} (as in the binary model), and a second term which depends on the gain function (neuron's activation function). While having many desirable properties of associative memory, both of these classical systems suffer from a small memory storage capacity, which scales linearly with the number of input features. == Discrete variables == A simple example of the Modern Hopfield network can be written in terms of binary variables V i {\displaystyle V_{i}} that represent the active V i = + 1 {\displaystyle V_{i}=+1} and inactive V i = − 1 {\displaystyle V_{i}=-1} state of the model neuron i {\displaystyle i} . E = − ∑ μ = 1 N mem F ( ∑ i = 1 N f ξ μ i V i ) {\displaystyle E=-\sum \limits _{\mu =1}^{N_{\text{mem}}}F{\Big (}\sum \limits _{i=1}^{N_{f}}\xi _{\mu i}V_{i}{\Big )}} In this formula the weights ξ μ i {\textstyle \xi _{\mu i}} represent the matrix of memory vectors (index μ = 1... N mem {\displaystyle \mu =1...N_{\text{mem}}} enumerates different memories, and index i = 1... N f {\displaystyle i=1...N_{f}} enumerates the content of each memory corresponding to the i {\displaystyle i} -th feature neuron), and the function F ( x ) {\displaystyle F(x)} is a rapidly growing non-linear function. The update rule for individual neurons (in the asynchronous case) can be written in the following form V i ( t + 1 ) = sign ⁡ [ ∑ μ = 1 N mem ( F ( ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) − F ( − ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) ) ] {\displaystyle V_{i}^{(t+1)}=\operatorname {sign} {\bigg [}\sum \limits _{\mu =1}^{N_{\text{mem}}}{\bigg (}F{\Big (}\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}-F{\Big (}-\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}{\bigg )}{\bigg ]}} which states that in order to calculate the updated state of the i {\textstyle i} -th neuron the network compares two energies: the energy of the network with the i {\displaystyle i} -th neuron in the ON state and the energy of the network with the i {\displaystyle i} -th neuron in the OFF state, given the states of the remaining neuron. The updated state of the i {\displaystyle i} -th neuron selects the state that has the lowest of the two energies. In the limiting case when the non-linear energy function is quadratic F ( x ) = x 2 {\displaystyle F(x)=x^{2}} these equations reduce to the familiar energy function and the update rule for the classical binary Hopfield network. The memory storage capacity of these networks can be calculated for random binary patterns. For the power energy function F ( x ) = x n {\displaystyle F(x)=x^{n}} the maximal number of memories that can be stored and retrieved from this network without errors is given by N mem max ≈ 1 2 ( 2 n − 3 ) ! ! N f n − 1 ln ⁡ ( N f ) {\displaystyle N_{\text{mem}}^{\max }\approx {\frac {1}{2(2n-3)!!}}{\frac {N_{f}^{n-1}}{\ln(N_{f})}}} For an exponential energy function F ( x ) = e x {\textstyle F(x)=e^{x}} the memory storage capacity is exponential in the number of feature neurons N mem max ≈ 2 N f / 2 {\displaystyle N_{\text{mem}}^{\max }\approx 2^{N_{f}/2}} == Continuous variables == Modern Hopfield networks or Dense Associative Memories can be best understood in continuous variables and continuous time. Consider the network architecture, shown in Fig.1, and the equations for the neurons' state evolutionwhere the currents of the feature neurons are denoted by x i {\textstyle x_{i}} , and the currents of the memory neurons are denoted by h μ {\displaystyle h_{\mu }} ( h {\displaystyle h} stands for hidden neurons). There are no synaptic connections among the feature neurons or the memory neurons. A matrix ξ μ i {\displaystyle \xi _{\mu i}} denotes the strength of synapses from a feature neuron i {\displaystyle i} to the memory neuron μ {\displaystyle \mu } . The synapses are assumed to be symmetric, so that the same value characterizes a different physical synapse from the memory neuron μ {\displaystyle \mu } to the feature neuron i {\displaystyle i} . The outputs of the memory neurons and the feature neurons are denoted by f μ {\displaystyle f_{\mu }} and g i {\displaystyle g_{i}} , which are non-linear functions of the corresponding currents. In general these outputs can depend on the currents of all the neurons in that layer so that f μ = f ( { h μ } ) {\displaystyle f_{\mu }=f(\{h_{\mu }\})} and g i = g ( { x i } ) {\textstyle g_{i}=g(\{x_{i}\})} . It is convenient to define these activation function as derivatives of the Lagrangian functions for the two groups of neuronsThis way the specific form of the equations for neuron's states is completely defined once the Lagrangian functions are specified. Finally, the time constants for the two groups of neurons are denoted by τ f {\displaystyle \tau _{f}} and τ h {\displaystyle \tau _{h}} , I i {\displaystyle I_{i}} is the input current to the network that can be driven by the presented data. General systems of non-linear differential equations can have many complicated behaviors that can depend on the choice of the non-linearities and the initial conditions. For Hopfield networks, however, this is not the case - the dynamical trajectories always converge to a fixed point attractor state. This property is achieved because these equations are specifically engineered so that they have an underlying energy function The terms grouped into square brackets represent a Legendre transform of the Lagrangian function with respect to the states of the neurons. If the Hessian matrices of the Lagrangian functions are positive semi-definite, the energy function is guaranteed to decrease on the dynamical trajectory This property makes it possible to prove that the system of dynamical equations describing temporal evolution of neurons' activities will eventually reach a fixed point attractor state. In certain situations one can assume that the dynamics of hidden neurons equilibrates at a much faster time scale compared to the feature neurons, τ h ≪ τ f {\textstyle \tau _{h}\ll \tau _{f}} . In this case the steady state solution of the second equation in the system (1) can be used to express the currents of the hidden units through the outputs of the feature neurons. This makes it possible to reduce the general theory (1) to an effective theory for feature neurons only. The resulting effective update rules and the energies for various common choices of the Lagrangian functions are shown in Fig.2. In the case of log-sum-exponential Lagrangian function the update rule (if applied once) for the states of the feature neurons is the attention mechanism commonly used in many modern AI systems (see Ref. for the derivation of this result from the continuous time formulation). == Relationship to classical Hopfield network with continuous variables == Classical formulation of continuous Hopfield networks can be understood as a

  Read more →
• 

  Colloquis

  Colloquis, previously known as ActiveBuddy and Conversagent, was a company that created conversation-based interactive agents originally distributed via instant messaging platforms. The company had offices in New York, New York, and Sunnyvale, California. == History == Founded in 2000, the company was the brainchild of Robert Hoffer, Timothy Kay, and Peter Levitan. The idea for interactive agents (also known as Internet bots) came from the team's vision to add functionality to increasingly popular instant messaging services. The original implementation took shape as a word-based adventure game but quickly grew to include a wide range of database applications, including access to news, weather, stock information, movie times, Yellow Pages listings, and detailed sports data, as well as a variety of tools (calculators, translator, etc.). These various applications were bundled into one entity and launched as SmarterChild in 2001. SmarterChild acted as a showcase for the quick data access and possibilities for fun conversation that the company planned to turn into customized, niche-specific products. The rapid success of SmarterChild led to targeted promotional products for Radiohead, Austin Powers, The Sporting News, and others. ActiveBuddy sought to strengthen its hold on the interactive agent market for the future by filing for, and receiving, a controversial patent on their creation in 2002. The company also released the BuddyScript SDK, a free developer kit that allow programmers to design and launch their own interactive agents using ActiveBuddy's proprietary scripting language, in 2002. Ultimately, however, the decline in ad spending in 2001 and 2002 led to a shift in corporate strategy towards business focused Automated Service Agents, building products for clients including Cingular, Comcast and Cox Communications. The company subsequently changed its name from ActiveBuddy to Conversagent in 2003, and then again to Colloquis in 2006. Colloquis was purchased by Microsoft in October 2006.

  Read more →
• 

  Cross-entropy

  In information theory, the cross-entropy between two probability distributions p {\displaystyle p} and q {\displaystyle q} , over the same underlying set of events, measures the average number of bits needed to identify an event drawn from the set when the coding scheme used for the set is optimized for an estimated probability distribution q {\displaystyle q} , rather than the true distribution p {\displaystyle p} . == Definition == The cross-entropy of the distribution q {\displaystyle q} relative to a distribution p {\displaystyle p} over a given set is defined as follows: H ( p , q ) = − E p ⁡ [ log ⁡ q ] , {\displaystyle H(p,q)=-\operatorname {E} _{p}[\log q],} where E p ⁡ [ ⋅ ] {\displaystyle \operatorname {E} _{p}[\cdot ]} is the expected value operator with respect to the distribution p {\displaystyle p} . The definition may be formulated using the Kullback–Leibler divergence D K L ( p ∥ q ) {\displaystyle D_{\mathrm {KL} }(p\parallel q)} , divergence of p {\displaystyle p} from q {\displaystyle q} (also known as the relative entropy of p {\displaystyle p} with respect to q {\displaystyle q} ). H ( p , q ) = H ( p ) + D K L ( p ∥ q ) , {\displaystyle H(p,q)=H(p)+D_{\mathrm {KL} }(p\parallel q),} where H ( p ) {\displaystyle H(p)} is the entropy of p {\displaystyle p} . For discrete probability distributions p {\displaystyle p} and q {\displaystyle q} with the same support X {\displaystyle {\mathcal {X}}} , this means The situation for continuous distributions is analogous. We have to assume that p {\displaystyle p} and q {\displaystyle q} are absolutely continuous with respect to some reference measure r {\displaystyle r} (usually r {\displaystyle r} is a Lebesgue measure on a Borel σ-algebra). Let P {\displaystyle P} and Q {\displaystyle Q} be probability density functions of p {\displaystyle p} and q {\displaystyle q} with respect to r {\displaystyle r} . Then − ∫ X P ( x ) log ⁡ Q ( x ) d x = E p ⁡ [ − log ⁡ Q ] , {\displaystyle -\int _{\mathcal {X}}P(x)\,\log Q(x)\,\mathrm {d} x=\operatorname {E} _{p}[-\log Q],} and therefore NB: The notation H ( p , q ) {\displaystyle H(p,q)} is also used for a different concept, the joint entropy of p {\displaystyle p} and q {\displaystyle q} . == Motivation == In information theory, the Kraft–McMillan theorem establishes that any directly decodable coding scheme for coding a message to identify one value x i {\displaystyle x_{i}} out of a set of possibilities { x 1 , … , x n } {\displaystyle \{x_{1},\ldots ,x_{n}\}} can be seen as representing an implicit probability distribution q ( x i ) = ( 1 2 ) ℓ i {\displaystyle q(x_{i})=\left({\frac {1}{2}}\right)^{\ell _{i}}} over { x 1 , … , x n } {\displaystyle \{x_{1},\ldots ,x_{n}\}} , where ℓ i {\displaystyle \ell _{i}} is the length of the code for x i {\displaystyle x_{i}} in bits. Therefore, cross-entropy can be interpreted as the expected message-length per datum when a wrong distribution q {\displaystyle q} is assumed while the data actually follows a distribution p {\displaystyle p} . That is why the expectation is taken over the true probability distribution p {\displaystyle p} and not q . {\displaystyle q.} Indeed the expected message-length under the true distribution p {\displaystyle p} is E p ⁡ [ ℓ ] = − E p ⁡ [ ln ⁡ q ( x ) ln ⁡ ( 2 ) ] = − E p ⁡ [ log 2 ⁡ q ( x ) ] = − ∑ x i p ( x i ) log 2 ⁡ q ( x i ) = − ∑ x p ( x ) log 2 ⁡ q ( x ) = H ( p , q ) . {\displaystyle {\begin{aligned}\operatorname {E} _{p}[\ell ]&=-\operatorname {E} _{p}\left[{\frac {\ln {q(x)}}{\ln(2)}}\right]\\[1ex]&=-\operatorname {E} _{p}\left[\log _{2}{q(x)}\right]\\[1ex]&=-\sum _{x_{i}}p(x_{i})\,\log _{2}q(x_{i})\\[1ex]&=-\sum _{x}p(x)\,\log _{2}q(x)=H(p,q).\end{aligned}}} == Estimation == There are many situations where cross-entropy needs to be measured but the distribution of p {\displaystyle p} is unknown. An example is language modeling, where a model is created based on a training set T {\displaystyle T} , and then its cross-entropy is measured on a test set to assess how accurate the model is in predicting the test data. In this example, p {\displaystyle p} is the true distribution of words in any corpus, and q {\displaystyle q} is the distribution of words as predicted by the model. Since the true distribution is unknown, cross-entropy cannot be directly calculated. In these cases, an estimate of cross-entropy is calculated using the following formula: H ( T , q ) = − ∑ i = 1 N 1 N log 2 ⁡ q ( x i ) {\displaystyle H(T,q)=-\sum _{i=1}^{N}{\frac {1}{N}}\log _{2}q(x_{i})} where N {\displaystyle N} is the size of the test set, and q ( x ) {\displaystyle q(x)} is the probability of event x {\displaystyle x} estimated from the training set. In other words, q ( x i ) {\displaystyle q(x_{i})} is the probability estimate of the model that the i-th word of the text is x i {\displaystyle x_{i}} . The sum is averaged over the N {\displaystyle N} words of the test. This is a Monte Carlo estimate of the true cross-entropy, where the test set is treated as samples from p ( x ) {\displaystyle p(x)} . == Relation to maximum likelihood == The cross entropy arises in classification problems when introducing a logarithm in the guise of the log-likelihood function. This section concerns the estimation of the probabilities of different discrete outcomes. To this end, denote a parametrized family of distributions by q θ {\displaystyle q_{\theta }} , with θ {\displaystyle \theta } subject to the optimization effort. Consider a given finite sequence of N {\displaystyle N} values x i {\displaystyle x_{i}} from a training set, obtained from conditionally independent sampling. The likelihood assigned to any considered parameter θ {\displaystyle \theta } of the model is then given by the product over all probabilities q θ ( X = x i ) {\displaystyle q_{\theta }(X=x_{i})} . Repeated occurrences are possible, leading to equal factors in the product. If the count of occurrences of the value equal to x {\displaystyle x} is denoted by # x {\displaystyle \#x} , then the frequency of that value equals # x / N {\displaystyle \#x/N} . If p ( X = x ) {\displaystyle p(X=x)} is the underlying probability distribution, for large N {\displaystyle N} we expect p ( X = x ) ≈ # x / N {\displaystyle p(X=x)\approx \#x/N} , by the law of large numbers. Writing our likelihood function as the product of observations from the distribution q θ {\displaystyle q_{\theta }} : L ( θ ; x ) = ∏ i q θ ( X = x i ) = ∏ x q θ ( X = x ) # x ≈ ∏ x q θ ( X = x ) N ⋅ p ( X = x ) = exp ⁡ log ⁡ [ ∏ x q θ ( X = x ) N ⋅ p ( X = x ) ] = exp ⁡ ( ∑ x N ⋅ p ( X = x ) log ⁡ q θ ( X = x ) ) , {\displaystyle {\begin{aligned}{\mathcal {L}}(\theta ;{\mathbf {x} })&=\prod _{i}q_{\theta }(X=x_{i})=\prod _{x}q_{\theta }(X=x)^{\#x}\\&\approx \prod _{x}q_{\theta }(X=x)^{N\cdot p(X=x)}=\exp \log \left[\prod _{x}q_{\theta }(X=x)^{N\cdot p(X=x)}\right]\\&=\exp \left(\sum _{x}N\cdot p(X=x)\log q_{\theta }(X=x)^{}\right),\end{aligned}}} where we have used the calculation rules for the logarithm in the final line. Notice how the exponent contains a − H ( p , q θ ) {\displaystyle -H(p,q_{\theta })} term. Taking the logarithm of both sides gives: log ⁡ L ( θ ; x ) = − N ⋅ H ( p , q θ ) . {\displaystyle \log {\mathcal {L}}(\theta ;{\mathbf {x} })=-N\cdot H(p,q_{\theta }).} Since the logarithm is a monotonically increasing function, the maximizing value of θ {\displaystyle \theta } is unaffected by this final step. Similarly, the maximizing value of θ {\displaystyle \theta } is unaffected by the factor of N {\displaystyle N} . So we observe that the likelihood maximization amounts to minimization of the cross-entropy. == Cross-entropy minimization == Cross-entropy minimization is frequently used in optimization and rare-event probability estimation. When comparing a distribution q {\displaystyle q} against a fixed reference distribution p {\displaystyle p} , cross-entropy and KL divergence are identical up to an additive constant (since p {\displaystyle p} is fixed): According to the Gibbs' inequality, both take on their minimal values when p = q {\displaystyle p=q} , which is 0 {\displaystyle 0} for KL divergence, and H ( p ) {\displaystyle \mathrm {H} (p)} for cross-entropy. In the engineering literature, the principle of minimizing KL divergence (Kullback's "Principle of Minimum Discrimination Information") is often called the Principle of Minimum Cross-Entropy (MCE), or Minxent. However, as discussed in the article Kullback–Leibler divergence, sometimes the distribution q {\displaystyle q} is the fixed prior reference distribution, and the distribution p {\displaystyle p} is optimized to be as close to q {\displaystyle q} as possible, subject to some constraint. In this case the two minimizations are not equivalent. This has led to some ambiguity in the literature, with some authors attempting to resolve the inconsistency by restating cross-entropy to be D K L ( p ∥ q ) {\displaystyle D_{\mathrm {KL} }(p\parallel q)} , rather than H (

  Read more →
• 

  Confirmatory blockmodeling

  Confirmatory blockmodeling is a deductive approach in blockmodeling, where a blockmodel (or part of it) is prespecify before the analysis, and then the analysis is fit to this model. When only a part of analysis is prespecify (like individual cluster(s) or location of the block types), it is called partially confirmatory blockmodeling. This is so-called indirect approach, where the blockmodeling is done on the blockmodel fitting (e.g., a priori hypothesized blockmodel). Opposite approach to the confirmatory blockmodeling is an inductive exploratory blockmodeling.

  Read more →
• 

  Language identification in the limit

  Language identification in the limit is a formal model for inductive inference of formal languages, mainly by computers (see machine learning and induction of regular languages). It was introduced by E. Mark Gold in a technical report and a journal article with the same title. In this model, a teacher provides to a learner some presentation (i.e. a sequence of strings) of some formal language. The learning is seen as an infinite process. Each time the learner reads an element of the presentation, it should provide a representation (e.g. a formal grammar) for the language. Gold defines that a learner can identify in the limit a class of languages if, given any presentation of any language in the class, the learner will produce only a finite number of wrong representations, and then stick with the correct representation. However, the learner need not be able to announce its correctness; and the teacher might present a counterexample to any representation arbitrarily long after. Gold defined two types of presentations: Text (positive information): an enumeration of all strings the language consists of. Complete presentation (positive and negative information): an enumeration of all possible strings, each with a label indicating if the string belongs to the language or not. == Learnability == This model is an early attempt to formally capture the notion of learnability. Gold's journal article introduces for contrast the stronger models Finite identification (where the learner has to announce correctness after a finite number of steps), and Fixed-time identification (where correctness has to be reached after an apriori-specified number of steps). A weaker formal model of learnability is the Probably approximately correct learning (PAC) model, introduced by Leslie Valiant in 1984. == Examples == It is instructive to look at concrete examples (in the tables) of learning sessions the definition of identification in the limit speaks about. A fictitious session to learn a regular language L over the alphabet {a,b} from text presentation:In each step, the teacher gives a string belonging to L, and the learner answers a guess for L, encoded as a regular expression. In step 3, the learner's guess is not consistent with the strings seen so far; in step 4, the teacher gives a string repeatedly. After step 6, the learner sticks to the regular expression (ab+ba). If this happens to be a description of the language L the teacher has in mind, it is said that the learner has learned that language.If a computer program for the learner's role would exist that was able to successfully learn each regular language, that class of languages would be identifiable in the limit. Gold has shown that this is not the case. A particular learning algorithm always guessing L to be just the union of all strings seen so far:If L is a finite language, the learner will eventually guess it correctly, however, without being able to tell when. Although the guess didn't change during step 3 to 6, the learner couldn't be sure to be correct.Gold has shown that the class of finite languages is identifiable in the limit, however, this class is neither finitely nor fixed-time identifiable. Learning from complete presentation by telling:In each step, the teacher gives a string and tells whether it belongs to L (green) or not (red, struck-out). Each possible string is eventually classified in this way by the teacher. Learning from complete presentation by request:The learner gives a query string, the teacher tells whether it belongs to L (yes) or not (no); the learner then gives a guess for L, followed by the next query string. In this example, the learner happens to query in each step just the same string as given by the teacher in example 3.In general, Gold has shown that each language class identifiable in the request-presentation setting is also identifiable in the telling-presentation setting, since the learner, instead of querying a string, just needs to wait until it is eventually given by the teacher. == Gold's theorem == More formally, a language L {\displaystyle L} is a nonempty set, and its elements are called sentences. a language family is a set of languages. a language-learning environment E {\displaystyle E} for a language L {\displaystyle L} is a stream of sentences from L {\displaystyle L} , such that each sentence in L {\displaystyle L} appears at least once. a language learner is a function f {\displaystyle f} that sends a list of sentences to a language. This is interpreted as saying that, after seeing sentences a 1 , a 2 . . . , a n {\displaystyle a_{1},a_{2}...,a_{n}} in that order, the language learner guesses that the language that produces the sentences should be f ( a 1 , . . . , a n ) {\displaystyle f(a_{1},...,a_{n})} . Note that the learner is not obliged to be correct — it could very well guess a language that does not even contain a 1 , . . . , a n {\displaystyle a_{1},...,a_{n}} . a language learner f {\displaystyle f} learns a language L {\displaystyle L} in environment E = ( a 1 , a 2 , . . . ) {\displaystyle E=(a_{1},a_{2},...)} if the learner always guesses L {\displaystyle L} after seeing enough examples from the environment. a language learner f {\displaystyle f} learns a language L {\displaystyle L} if it learns L {\displaystyle L} in any environment E {\displaystyle E} for L {\displaystyle L} . a language family is learnable if there exists a language learner that can learn all languages in the family. Notes: In the context of Gold's theorem, sentences need only be distinguishable. They need not be anything in particular, such as finite strings (as usual in formal linguistics). Learnability is not a concept for individual languages. Any individual language L {\displaystyle L} could be learned by a trivial learner that always guesses L {\displaystyle L} . Learnability is not a concept for individual learners. A language family is learnable if, and only if, there exists some learner that can learn the family. It does not matter how well the learner performs for learning languages outside the family. Gold's theorem is easily bypassed if negative examples are allowed. In particular, the language family { L 1 , L 2 , . . . , L ∞ } {\displaystyle \{L_{1},L_{2},...,L_{\infty }\}} can be learned by a learner that always guesses L ∞ {\displaystyle L_{\infty }} until it receives the first negative example ¬ a n {\displaystyle \neg a_{n}} , where a n ∈ L n + 1 ∖ L n {\displaystyle a_{n}\in L_{n+1}\setminus L_{n}} , at which point it always guesses L n {\displaystyle L_{n}} . == Learnability characterization == Dana Angluin gave the characterizations of learnability from text (positive information) in a 1980 paper. If a learner is required to be effective, then an indexed class of recursive languages is learnable in the limit if there is an effective procedure that uniformly enumerates tell-tales for each language in the class (Condition 1). It is not hard to see that if an ideal learner (i.e., an arbitrary function) is allowed, then an indexed class of languages is learnable in the limit if each language in the class has a tell-tale (Condition 2). == Language classes learnable in the limit == The table shows which language classes are identifiable in the limit in which learning model. On the right-hand side, each language class is a superclass of all lower classes. Each learning model (i.e. type of presentation) can identify in the limit all classes below it. In particular, the class of finite languages is identifiable in the limit by text presentation (cf. Example 2 above), while the class of regular languages is not. Pattern Languages, introduced by Dana Angluin in another 1980 paper, are also identifiable by normal text presentation; they are omitted in the table, since they are above the singleton and below the primitive recursive language class, but incomparable to the classes in between. == Sufficient conditions for learnability == Condition 1 in Angluin's paper is not always easy to verify. Therefore, people come up with various sufficient conditions for the learnability of a language class. See also Induction of regular languages for learnable subclasses of regular languages. === Finite thickness === A class of languages has finite thickness if every non-empty set of strings is contained in at most finitely many languages of the class. This is exactly Condition 3 in Angluin's paper. Angluin showed that if a class of recursive languages has finite thickness, then it is learnable in the limit. A class with finite thickness certainly satisfies MEF-condition and MFF-condition; in other words, finite thickness implies M-finite thickness. === Finite elasticity === A class of languages is said to have finite elasticity if for every infinite sequence of strings s 0 , s 1 , . . . {\displaystyle s_{0},s_{1},...} and every infinite sequence of languages in the class L 1 , L 2 , . . . {\displaystyle L_{1},L_{2},...} , there exists a finite number n such

  Read more →
• 

  Instance selection

  Instance selection (or dataset reduction, or dataset condensation) is an important data pre-processing step that can be applied in many machine learning (or data mining) tasks. Approaches for instance selection can be applied for reducing the original dataset to a manageable volume, leading to a reduction of the computational resources that are necessary for performing the learning process. Algorithms of instance selection can also be applied for removing noisy instances, before applying learning algorithms. This step can improve the accuracy in classification problems. Algorithm for instance selection should identify a subset of the total available data to achieve the original purpose of the data mining (or machine learning) application as if the whole data had been used. Considering this, the optimal outcome of IS would be the minimum data subset that can accomplish the same task with no performance loss, in comparison with the performance achieved when the task is performed using the whole available data. Therefore, every instance selection strategy should deal with a trade-off between the reduction rate of the dataset and the classification quality. == Instance selection algorithms == The literature provides several different algorithms for instance selection. They can be distinguished from each other according to several different criteria. Considering this, instance selection algorithms can be grouped in two main classes, according to what instances they select: algorithms that preserve the instances at the boundaries of classes and algorithms that preserve the internal instances of the classes. Within the category of algorithms that select instances at the boundaries it is possible to cite DROP3, ICF and LSBo. On the other hand, within the category of algorithms that select internal instances, it is possible to mention ENN and LSSm. In general, algorithm such as ENN and LSSm are used for removing harmful (noisy) instances from the dataset. They do not reduce the data as the algorithms that select border instances, but they remove instances at the boundaries that have a negative impact on the data mining task. They can be used by other instance selection algorithms, as a filtering step. For example, the ENN algorithm is used by DROP3 as the first step, and the LSSm algorithm is used by LSBo. There is also another group of algorithms that adopt different selection criteria. For example, the algorithms LDIS, CDIS and XLDIS select the densest instances in a given arbitrary neighborhood. The selected instances can include both, border and internal instances. The LDIS and CDIS algorithms are very simple and select subsets that are very representative of the original dataset. Besides that, since they search by the representative instances in each class separately, they are faster (in terms of time complexity and effective running time) than other algorithms, such as DROP3 and ICF. Besides that, there is a third category of algorithms that, instead of selecting actual instances of the dataset, select prototypes (that can be synthetic instances). In this category it is possible to include PSSA, PSDSP and PSSP. The three algorithms adopt the notion of spatial partition (a hyperrectangle) for identifying similar instances and extract prototypes for each set of similar instances. In general, these approaches can also be modified for selecting actual instances of the datasets. The algorithm ISDSP adopts a similar approach for selecting actual instances (instead of prototypes).

  Read more →
• 

  Modern Hopfield network

  Modern Hopfield networks (also known as Dense Associative Memories) are generalizations of the classical Hopfield networks that break the linear scaling relationship between the number of input features and the number of stored memories. This is achieved by introducing stronger non-linearities (either in the energy function or neurons’ activation functions) leading to super-linear (even an exponential) memory storage capacity as a function of the number of feature neurons. The network still requires a sufficient number of hidden neurons. The key theoretical idea behind the modern Hopfield networks is to use an energy function and an update rule that is more sharply peaked around the stored memories in the space of neuron’s configurations compared to the classical Hopfield network. == Classical Hopfield networks == Hopfield networks are recurrent neural networks with dynamical trajectories converging to fixed point attractor states and described by an energy function. The state of each model neuron i {\textstyle i} is defined by a time-dependent variable V i {\displaystyle V_{i}} , which can be chosen to be either discrete or continuous. A complete model describes the mathematics of how the future state of activity of each neuron depends on the known present or previous activity of all the neurons. In the original Hopfield model of associative memory, the variables were binary, and the dynamics were described by a one-at-a-time update of the state of the neurons. An energy function quadratic in the V i {\displaystyle V_{i}} was defined, and the dynamics consisted of changing the activity of each single neuron i {\displaystyle i} only if doing so would lower the total energy of the system. This same idea was extended to the case of V i {\displaystyle V_{i}} being a continuous variable representing the output of neuron i {\displaystyle i} , and V i {\displaystyle V_{i}} being a monotonic function of an input current. The dynamics became expressed as a set of first-order differential equations for which the "energy" of the system always decreased. The energy in the continuous case has one term which is quadratic in the V i {\displaystyle V_{i}} (as in the binary model), and a second term which depends on the gain function (neuron's activation function). While having many desirable properties of associative memory, both of these classical systems suffer from a small memory storage capacity, which scales linearly with the number of input features. == Discrete variables == A simple example of the Modern Hopfield network can be written in terms of binary variables V i {\displaystyle V_{i}} that represent the active V i = + 1 {\displaystyle V_{i}=+1} and inactive V i = − 1 {\displaystyle V_{i}=-1} state of the model neuron i {\displaystyle i} . E = − ∑ μ = 1 N mem F ( ∑ i = 1 N f ξ μ i V i ) {\displaystyle E=-\sum \limits _{\mu =1}^{N_{\text{mem}}}F{\Big (}\sum \limits _{i=1}^{N_{f}}\xi _{\mu i}V_{i}{\Big )}} In this formula the weights ξ μ i {\textstyle \xi _{\mu i}} represent the matrix of memory vectors (index μ = 1... N mem {\displaystyle \mu =1...N_{\text{mem}}} enumerates different memories, and index i = 1... N f {\displaystyle i=1...N_{f}} enumerates the content of each memory corresponding to the i {\displaystyle i} -th feature neuron), and the function F ( x ) {\displaystyle F(x)} is a rapidly growing non-linear function. The update rule for individual neurons (in the asynchronous case) can be written in the following form V i ( t + 1 ) = sign ⁡ [ ∑ μ = 1 N mem ( F ( ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) − F ( − ξ μ i + ∑ j ≠ i ξ μ j V j ( t ) ) ) ] {\displaystyle V_{i}^{(t+1)}=\operatorname {sign} {\bigg [}\sum \limits _{\mu =1}^{N_{\text{mem}}}{\bigg (}F{\Big (}\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}-F{\Big (}-\xi _{\mu i}+\sum \limits _{j\neq i}\xi _{\mu j}V_{j}^{(t)}{\Big )}{\bigg )}{\bigg ]}} which states that in order to calculate the updated state of the i {\textstyle i} -th neuron the network compares two energies: the energy of the network with the i {\displaystyle i} -th neuron in the ON state and the energy of the network with the i {\displaystyle i} -th neuron in the OFF state, given the states of the remaining neuron. The updated state of the i {\displaystyle i} -th neuron selects the state that has the lowest of the two energies. In the limiting case when the non-linear energy function is quadratic F ( x ) = x 2 {\displaystyle F(x)=x^{2}} these equations reduce to the familiar energy function and the update rule for the classical binary Hopfield network. The memory storage capacity of these networks can be calculated for random binary patterns. For the power energy function F ( x ) = x n {\displaystyle F(x)=x^{n}} the maximal number of memories that can be stored and retrieved from this network without errors is given by N mem max ≈ 1 2 ( 2 n − 3 ) ! ! N f n − 1 ln ⁡ ( N f ) {\displaystyle N_{\text{mem}}^{\max }\approx {\frac {1}{2(2n-3)!!}}{\frac {N_{f}^{n-1}}{\ln(N_{f})}}} For an exponential energy function F ( x ) = e x {\textstyle F(x)=e^{x}} the memory storage capacity is exponential in the number of feature neurons N mem max ≈ 2 N f / 2 {\displaystyle N_{\text{mem}}^{\max }\approx 2^{N_{f}/2}} == Continuous variables == Modern Hopfield networks or Dense Associative Memories can be best understood in continuous variables and continuous time. Consider the network architecture, shown in Fig.1, and the equations for the neurons' state evolutionwhere the currents of the feature neurons are denoted by x i {\textstyle x_{i}} , and the currents of the memory neurons are denoted by h μ {\displaystyle h_{\mu }} ( h {\displaystyle h} stands for hidden neurons). There are no synaptic connections among the feature neurons or the memory neurons. A matrix ξ μ i {\displaystyle \xi _{\mu i}} denotes the strength of synapses from a feature neuron i {\displaystyle i} to the memory neuron μ {\displaystyle \mu } . The synapses are assumed to be symmetric, so that the same value characterizes a different physical synapse from the memory neuron μ {\displaystyle \mu } to the feature neuron i {\displaystyle i} . The outputs of the memory neurons and the feature neurons are denoted by f μ {\displaystyle f_{\mu }} and g i {\displaystyle g_{i}} , which are non-linear functions of the corresponding currents. In general these outputs can depend on the currents of all the neurons in that layer so that f μ = f ( { h μ } ) {\displaystyle f_{\mu }=f(\{h_{\mu }\})} and g i = g ( { x i } ) {\textstyle g_{i}=g(\{x_{i}\})} . It is convenient to define these activation function as derivatives of the Lagrangian functions for the two groups of neuronsThis way the specific form of the equations for neuron's states is completely defined once the Lagrangian functions are specified. Finally, the time constants for the two groups of neurons are denoted by τ f {\displaystyle \tau _{f}} and τ h {\displaystyle \tau _{h}} , I i {\displaystyle I_{i}} is the input current to the network that can be driven by the presented data. General systems of non-linear differential equations can have many complicated behaviors that can depend on the choice of the non-linearities and the initial conditions. For Hopfield networks, however, this is not the case - the dynamical trajectories always converge to a fixed point attractor state. This property is achieved because these equations are specifically engineered so that they have an underlying energy function The terms grouped into square brackets represent a Legendre transform of the Lagrangian function with respect to the states of the neurons. If the Hessian matrices of the Lagrangian functions are positive semi-definite, the energy function is guaranteed to decrease on the dynamical trajectory This property makes it possible to prove that the system of dynamical equations describing temporal evolution of neurons' activities will eventually reach a fixed point attractor state. In certain situations one can assume that the dynamics of hidden neurons equilibrates at a much faster time scale compared to the feature neurons, τ h ≪ τ f {\textstyle \tau _{h}\ll \tau _{f}} . In this case the steady state solution of the second equation in the system (1) can be used to express the currents of the hidden units through the outputs of the feature neurons. This makes it possible to reduce the general theory (1) to an effective theory for feature neurons only. The resulting effective update rules and the energies for various common choices of the Lagrangian functions are shown in Fig.2. In the case of log-sum-exponential Lagrangian function the update rule (if applied once) for the states of the feature neurons is the attention mechanism commonly used in many modern AI systems (see Ref. for the derivation of this result from the continuous time formulation). == Relationship to classical Hopfield network with continuous variables == Classical formulation of continuous Hopfield networks can be understood as a

  Read more →
• 

  Induction of regular languages

  In computational learning theory, induction of regular languages refers to the task of learning a formal description (e.g. grammar) of a regular language from a given set of example strings. Although E. Mark Gold has shown that not every regular language can be learned this way (see language identification in the limit), approaches have been investigated for a variety of subclasses. They are sketched in this article. For learning of more general grammars, see Grammar induction. == Definitions == A regular language is defined as a (finite or infinite) set of strings that can be described by one of the mathematical formalisms called "finite automaton", "regular grammar", or "regular expression", all of which have the same expressive power. Since the latter formalism leads to shortest notations, it shall be introduced and used here. Given a set Σ of symbols (a.k.a. alphabet), a regular expression can be any of ∅ (denoting the empty set of strings), ε (denoting the singleton set containing just the empty string), a (where a is any character in Σ; denoting the singleton set just containing the single-character string a), r + s (where r and s are, in turn, simpler regular expressions; denoting their set's union) r ⋅ s (denoting the set of all possible concatenations of strings from r's and s's set), r + (denoting the set of n-fold repetitions of strings from r's set, for any n ≥ 1), or r (similarly denoting the set of n-fold repetitions, but also including the empty string, seen as 0-fold repetition). For example, using Σ = {0,1}, the regular expression (0+1+ε)⋅(0+1) denotes the set of all binary numbers with one or two digits (leading zero allowed), while 1⋅(0+1)⋅0 denotes the (infinite) set of all even binary numbers (no leading zeroes). Given a set of strings (also called "positive examples"), the task of regular language induction is to come up with a regular expression that denotes a set containing all of them. As an example, given {1, 10, 100}, a "natural" description could be the regular expression 1⋅0, corresponding to the informal characterization "a 1 followed by arbitrarily many (maybe even none) 0's". However, (0+1) and 1+(1⋅0)+(1⋅0⋅0) is another regular expression, denoting the largest (assuming Σ = {0,1}) and the smallest set containing the given strings, and called the trivial overgeneralization and undergeneralization, respectively. Some approaches work in an extended setting where also a set of "negative example" strings is given; then, a regular expression is to be found that generates all of the positive, but none of the negative examples. == Lattice of automata == Dupont et al. have shown that the set of all structurally complete finite automata generating a given input set of example strings forms a lattice, with the trivial undergeneralized and the trivial overgeneralized automaton as bottom and top element, respectively. Each member of this lattice can be obtained by factoring the undergeneralized automaton by an appropriate equivalence relation. For the above example string set {1, 10, 100}, the picture shows at its bottom the undergeneralized automaton Aa,b,c,d in grey, consisting of states a, b, c, and d. On the state set {a,b,c,d}, a total of 15 equivalence relations exist, forming a lattice. Mapping each equivalence E to the corresponding quotient automaton language L(Aa,b,c,d / E) obtains the partially ordered set shown in the picture. Each node's language is denoted by a regular expression. The language may be recognized by quotient automata w.r.t. different equivalence relations, all of which are shown below the node. An arrow between two nodes indicates that the lower node's language is a proper subset of the higher node's. If both positive and negative example strings are given, Dupont et al. build the lattice from the positive examples, and then investigate the separation border between automata that generate some negative example and such that do not. Most interesting are those automata immediately below the border. In the picture, separation borders are shown for the negative example strings 11 (green), 1001 (blue), 101 (cyan), and 0 (red). Coste and Nicolas present an own search method within the lattice, which they relate to Mitchell's version space paradigm. To find the separation border, they use a graph coloring algorithm on the state inequality relation induced by the negative examples. Later, they investigate several ordering relations on the set of all possible state fusions. Kudo and Shimbo use the representation by automaton factorizations to give a unique framework for the following approaches (sketched below): k-reversible languages and the "tail clustering" follow-up approach, Successor automata and the predecessor-successor method, and pumping-based approaches (framework-integration challenged by Luzeaux, however). Each of these approaches is shown to correspond to a particular kind of equivalence relations used for factorization. == Approaches == === k-reversible languages === Angluin considers so-called "k-reversible" regular automata, that is, deterministic automata in which each state can be reached from at most one state by following a transition chain of length k. Formally, if Σ, Q, and δ denote the input alphabet, the state set, and the transition function of an automaton A, respectively, then A is called k-reversible if: ∀a0, ..., ak ∈ Σ ∀s1, s2 ∈ Q: δ(s1, a0...ak) = δ(s2, a0...ak) ⇒ s1 = s2, where δ means the homomorphic extension of δ to arbitrary words. Angluin gives a cubic algorithm for learning of the smallest k-reversible language from a given set of input words; for k = 0, the algorithm has even almost linear complexity. The required state uniqueness after k + 1 given symbols forces unifying automaton states, thus leading to a proper generalization different from the trivial undergeneralized automaton. This algorithm has been used to learn simple parts of English syntax; later, an incremental version has been provided. Another approach based on k-reversible automata is the tail clustering method. === Successor automata === From a given set of input strings, Vernadat and Richetin build a so-called successor automaton, consisting of one state for each distinct character and a transition between each two adjacent characters' states. For example, the singleton input set {aabbaabb} leads to an automaton corresponding to the regular expression (a+⋅b+). An extension of this approach is the predecessor-successor method which generalizes each character repetition immediately to a Kleene + and then includes for each character the set of its possible predecessors in its state. Successor automata can learn exactly the class of local languages. Since each regular language is the homomorphic image of a local language, grammars from the former class can be learned by lifting, if an appropriate (depending on the intended application) homomorphism is provided. In particular, there is such a homomorphism for the class of languages learnable by the predecessor-successor method. The learnability of local languages can be reduced to that of k-reversible languages. === Early approaches === Chomsky and Miller (1957) used the pumping lemma: they guess a part v of an input string uvw and try to build a corresponding cycle into the automaton to be learned; using membership queries they ask, for appropriate k, which of the strings uw, uvvw, uvvvw, ..., uvkw also belongs to the language to be learned, thereby refining the structure of their automaton. In 1959, Solomonoff generalized this approach to context-free languages, which also obey a pumping lemma. === Cover automata === Câmpeanu et al. learn a finite automaton as a compact representation of a large finite language. Given such a language F, they search a so-called cover automaton A such that its language L(A) covers F in the following sense: L(A) ∩ Σ≤ l = F, where l is the length of the longest string in F, and Σ≤ l denotes the set of all strings not longer than l. If such a cover automaton exists, F is uniquely determined by A and l. For example, F = {ad, read, reread } has l = 6 and a cover automaton corresponding to the regular expression (r⋅e)⋅a⋅d. For two strings x and y, Câmpeanu et al. define x ~ y if xz ∈ F ⇔ yz ∈ F for all strings z of a length such that both xz and yz are not longer than l. Based on this relation, whose lack of transitivity causes considerable technical problems, they give an O(n4) algorithm to construct from F a cover automaton A of minimal state count. Moreover, for union, intersection, and difference of two finite languages they provide corresponding operations on their cover automata. Păun et al. improve the time complexity to O(n2). === Residual automata === For a set S of strings and a string u, the Brzozowski derivative u−1S is defined as the set of all rest-strings obtainable from a string in S by cutting off its prefix u (if possible), formally: u−1S = {v ∈ Σ: uv ∈ S}, cf. picture. Denis et al. define a

  Read more →
• 

  Teaching dimension

  In computational learning theory, the teaching dimension of a concept class C is defined to be max c ∈ C { w C ( c ) } {\displaystyle \max _{c\in C}\{w_{C}(c)\}} , where w C ( c ) {\displaystyle {w_{C}(c)}} is the minimum size of a witness set for c in C. Intuitively, this measures the number of instances that are needed to identify a concept in the class, using supervised learning with examples provided by a helpful teacher who is trying to convey the concept as succinctly as possible. This definition was formulated in 1995 by Sally Goldman and Michael Kearns, based on earlier work by Goldman, Ron Rivest, and Robert Schapire. The teaching dimension of a finite concept class can be used to give a lower and an upper bound on the membership query cost of the concept class. In Stasys Jukna's book "Extremal Combinatorics", a lower bound is given for the teaching dimension in general: Let C be a concept class over a finite domain X. If the size of C is greater than 2 k ( | X | k ) , {\displaystyle 2^{k}{|X| \choose k},} then the teaching dimension of C is greater than k. However, there are more specific teaching models that make assumptions about teacher or learner, and can get lower values for the teaching dimension. For instance, several models are the classical teaching (CT) model, the optimal teacher (OT) model, recursive teaching (RT), preference-based teaching (PBT), and non-clashing teaching (NCT).

  Read more →
• 

  Arattai

  Arattai Messenger (or simply Arattai) is an encrypted messaging service for instant messaging, voice calls, and video calls, developed by Zoho Corporation. The name Arattai means "chat" or "conversation" in Tamil. The app was soft-launched in January 2021. The app saw a sharp surge in downloads in September 2025, partially fueled by endorsements from Indian government officials. However, the app dropped from the top rankings in October 2025. == History == Arattai was initially tested internally among Zoho employees before being released publicly in early 2021. The launch coincided with a surge in interest for privacy-focused and messaging services, triggered by concerns over WhatsApp's updated terms of service. In September 2025, Arattai experienced a major surge in adoption, with daily sign-ups reportedly increasing 100-fold, from around 3,000 to more than 350,000 in three days. The surge in downloads was attributed to Zoho products being promoted by Indian government officials as part of their Make in India push for homegrown alternatives to foreign‐owned apps, amid deteriorating India–US relations. The growth temporarily strained Zoho's infrastructure, prompting rapid scaling of servers and capacity expansion. During the same period, the app reached the top position in Apple's App Store charts for the "Social Networking" category in India. The app dropped from the top ranking in late October 2025. == Reception == At launch, Arattai was positioned as a potential domestic rival to WhatsApp in India, but analysts noted that it faced challenges with encryption, ecosystem, and network effect. Critics pointed to occasional sync delays.

  Read more →
• 

  Persian Speech Corpus

  The Persian Speech Corpus is a Modern Persian speech corpus for speech synthesis. The corpus contains phonetic and orthographic transcriptions of about 2.5 hours of Persian speech aligned with recorded speech on the phoneme level, including annotations of word boundaries. Previous spoken corpora of Persian include FARSDAT, which consists of read aloud speech from newspaper texts from 100 Persian speakers and the Telephone FARsi Spoken language DATabase (TFARSDAT) which comprises seven hours of read and spontaneous speech produced by 60 native speakers of Persian from ten regions of Iran. The Persian Speech Corpus was built using the same methodologies laid out in the doctoral project on Modern Standard Arabic of Nawar Halabi at the University of Southampton. The work was funded by MicroLinkPC, who own an exclusive license to commercialise the corpus, though the corpus is available for non-commercial use through the corpus' website. It is distributed under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. The corpus was built for speech synthesis purposes, but has been used for building HMM based voices in Persian. It can also be used to automatically align other speech corpora with their phonetic transcript and could be used as part of a larger corpus for training speech recognition systems. == Contents == The corpus is downloadable from its website, and contains the following: 396 .wav files containing spoken utterances 396 .lab files containing text utterances 396 .TextGrid files containing the phoneme labels with time stamps of the boundaries where these occur in the .wav files. phonetic-transcript.txt which has the form "[wav_filename]" "[Phoneme Sequence]" in every line orthographic-transcript.txt which has the form "[wav_filename]" "[Orthographic Transcript]" in every line

  Read more →
• 

  Latent class model

  In statistics, a latent class model (LCM) is a model for clustering multivariate discrete data. It assumes that the data arise from a mixture of discrete distributions, within each of which the variables are independent. It is called a latent class model because the class to which each data point belongs is unobserved (or latent). Latent class analysis (LCA) is a subset of structural equation modeling used to find groups or subtypes of cases in multivariate categorical data. These groups or subtypes of cases are called "latent classes". When faced with the following situation, a researcher might opt to use LCA to better understand the data: Symptoms a, b, c, and d have been recorded in a variety of patients diagnosed with diseases X, Y, and Z. Disease X is associated with symptoms a, b, and c; disease Y is linked to symptoms b, c, and d; and disease Z is connected to symptoms a, c, and d. In this context, the LCA would attempt to detect the presence of latent classes (i.e., the disease entities), thus creating patterns of association in the symptoms. As in factor analysis, LCA can also be used to classify cases according to their maximum likelihood class membership probability. The key criterion for resolving the LCA is identifying latent classes in which the observed symptom associations are effectively rendered null. This is because within each class, the diseases responsible for the symptoms create a structure of dependencies. As a result, the symptoms become conditionally independent, meaning that, given the class a case belongs to, the symptoms are no longer related to one another. == Model == Within each latent class, the observed variables are statistically independent—an essential aspect of latent class modeling. Usually, the observed variables are statistically dependent. By introducing the latent variable, independence is restored in the sense that within classes, variables are independent (local independence). Therefore, the association between the observed variables is explained by the classes of the latent variable (McCutcheon, 1987). In one form, the LCM is written as p i 1 , i 2 , … , i N ≈ ∑ t T p t ∏ n N p i n , t n , {\displaystyle p_{i_{1},i_{2},\ldots ,i_{N}}\approx \sum _{t}^{T}p_{t}\,\prod _{n}^{N}p_{i_{n},t}^{n},} where T {\displaystyle T} is the number of latent classes and p t {\displaystyle p_{t}} are the so-called recruitment or unconditional probabilities that should sum to one. p i n , t n {\displaystyle p_{i_{n},t}^{n}} are the marginal or conditional probabilities. For a two-way latent class model, the form is p i j ≈ ∑ t T p t p i t p j t . {\displaystyle p_{ij}\approx \sum _{t}^{T}p_{t}\,p_{it}\,p_{jt}.} This two-way model is related to probabilistic latent semantic analysis and non-negative matrix factorization. The probability model used in LCA is closely related to the Naive Bayes classifier. The main difference is that in LCA, the class membership of an individual is a latent variable, whereas in Naive Bayes classifiers, the class membership is an observed label. == Related methods == There are a number of methods with distinct names and uses that share a common relationship. Cluster analysis is, like LCA, used to discover taxon-like groups of cases in data. Multivariate mixture estimation (MME) is applicable to continuous data and assumes that such data arise from a mixture of distributions, such as a set of heights arising from a mixture of men and women. If a multivariate mixture estimation is constrained so that measures must be uncorrelated within each distribution, it is termed latent profile analysis. Modified to handle discrete data, this constrained analysis is known as LCA. Discrete latent trait models further constrain the classes to form from segments of a single dimension, allocating members to classes based on that dimension. An example would be assigning cases to social classes based on ability or merit. In a practical instance, the variables could be multiple choice items of a political questionnaire. In this case, the data consists of an N-way contingency table with answers to the items for a number of respondents. In this example, the latent variable refers to political opinion, and the latent classes to political groups. Given group membership, the conditional probabilities specify the chance that certain answers are chosen. == Application == LCA may be used in many fields, such as: collaborative filtering, Behavior Genetics and Evaluation of diagnostic tests.

  Read more →