AI Code Janitor

AI Code Janitor — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Spatiotemporal reservoir resampling

  Spatiotemporal reservoir resampling, commonly known as ReSTIR (from "Reservoir-based SpatioTemporal Importance Resampling"), is a collection of computer graphics techniques for reusing samples during rendering. It was developed primarily to allow more realistic lighting in real-time rendering, because relatively few rays can be traced per pixel while maintaining an acceptable frame rate. It can also be used to speed up off-line path tracing. The first ReSTIR paper, published in 2020, provided algorithms for direct lighting, allowing scenes containing thousands of lights to be rendered in real time on a high-end GPU. Researchers later proposed versions for rendering indirect lighting (and more recently, motion blur and depth of field) and built up a framework of mathematical concepts and notation conventions that help analyze such algorithms. A major focus of this work is removing or reducing the bias that could be introduced when samples from other pixels or frames are reused—or selectively allowing some bias in order to speed up rendering and reduce variance (visible as "noise" in the image). Versions for path tracing apply transformations called shift mappings to samples, typically reusing parts of paths closer to the light and modifying the portion closer to the camera. ReSTIR-related papers and talks have been presented every year at the SIGGRAPH conference since 2020. One of the first games to incorporate ReSTIR into its rendering was Cyberpunk 2077. == Overview and motivation == According to Chris Wyman, one of the co-authors of the original paper, although developers commonly thought that bias was acceptable for real-time rendering, end users (e.g. gamers) are well-aware of the artifacts caused by bias and many have a negative opinion of common sample-reuse techniques such as temporal anti-aliasing (TAA), which may cause "ghosting" when the camera moves, and denoising, which causes blurring and other artifacts. ReSTIR techniques can reduce or avoid these types of bias by reusing samples of the set of possible paths taken by light to reach the camera, instead of reusing rendered pixel color values (which are typically the average of multiple samples, discarding information such as the direction of the light). While other techniques reuse samples in a generic post-processing step, ReSTIR passes can test for shadowing, and reused samples are converted into pixel color values by rendering code that takes the characteristics of different materials into account (e.g. by implementing BRDFs). However the output of ReSTIR is noisy, and a denoising pass is typically still used. Stochastic ray tracing techniques such as path tracing need to average multiple samples (produced by tracing individual rays) in order to render a visually acceptable image. When using a simple unbiased renderer based on Monte Carlo integration, halving the deviation of the result (apparent as "noise" in the image) requires multiplying the number of samples by four, meaning that a rapidly increasingly number of samples is needed to improve quality, Standard ways to mitigate this problem include importance sampling (which requires finding improved sampling distributions for specific situations), and quasi-Monte Carlo integration (which usually still requires tracing a large number of rays). ReSTIR offers a solution that multiplies the effective number of samples while tracing a fixed number of additional rays per frame. Temporal reuse multiplies the effective sample count by the number of frames rendered. Spatial reuse multiplies the effective count by the number of neighboring pixels examined. These two types of reuse can be combined, allowing spatial reuse to be applied recursively, which appears to offer an exponentially increasing effective sample count, however this is quickly limited by the size of the neighborhood used for spatial reuse. Spatial reuse is also potentially less effective near shadow and object edges, especially for objects with fine geometric detail, and temporal reuse is limited by movement of the camera and scene elements. == Variations == Many variations of ReSTIR have been proposed that generalize or improve the original technique (which builds on an earlier method called RIS), specialize it for particular types of illumination or other visual effects, or allow incorporation into rendering algorithms other than standard path tracing. Some published versions are listed below. == Algorithms == === Basic algorithm === ReSTIR uses a combination of resampled importance sampling (RIS) and weighted reservoir sampling (WRS) which the authors call streaming RIS. RIS processes samples from an initial probability distribution (e.g. a probability distribution for which a cheap sampling method exists) and generates samples in a new probability distribution (e.g. a sampling distribution that is optimal for rendering but is impractical to draw samples from directly). WRS allows this to be done while storing only a small number of samples in memory, which is especially helpful on a GPU. Information about the samples is stored in a data structure called a reservoir. WRS also allows samples from multiple reservoirs to be combined ("merged") into a single reservoir; this is crucial for sample reuse. Each pixel has a reservoir, typically containing only a single sample when ReSTIR is used for real-time rendering (some implementations use a larger number, e.g. four samples). The reservoir is typically initialized to a sample drawn using a simple method and is then updated by RIS steps and by reservoir merging, so that the pixel value produced by shading using the sample(s) currently in the reservoir, times the weight for the sample, is always an unbiased estimate of the correct pixel value. If appropriate resampling steps are used, the variance of this estimate (or some function of it, typically the luminance of the RGB color value) decreases with each step. A possible sequence of steps performed for each frame, suitable for computing unbiased direct illumination (DI) is: Perform reservoir resampling by drawing multiple light samples and using streaming RIS to choose one, using probabilities based on a target function, e.g. the luminance of the sample's contribution to the pixel. A weight is also computed for the sample. Typically, a single visibility check is performed here, after choosing a sample, setting the weight to 0 if the light is shadowed. Resampling (combined with the visibility check) ensures that the expected value of the weight times the sample brightness is the correct (unbiased) value for the pixel. (temporal reuse) For each pixel, merge the sample(s) from the previous frame into the current reservoir. Multiple importance sampling (MIS) weights are used to avoid bias due to the fact that the samples in the previous frame's reservoirs may have a different target probability distribution if the objects, lights, or camera have moved. (spatial reuse) For each pixel, choose one or more neighboring pixels and merge their samples into the current pixel's reservoir. Multiple importance sampling (MIS) weights are used to avoid bias due to the fact that the samples in each pixel's reservoir have a different target probability distribution. Because computing unbiased MIS weights requires tracing additional rays (along with other work such as evaluating BRDFs), real-time rendering often uses only a single neighboring pixel. Use the sample in each pixel's reservoir, along with its weight, to determine the color of the pixel for the current frame. Alternatively, multiple samples examined during the preceding steps may be averaged and used to shade the pixel instead (decoupled shading and sampling). For direct lighting, the initial samples used in step 1 are typically drawn by importance sampling from the set of lights in a scene. The algorithm above (from the original ReSTIR paper) draws many lower-quality light samples (e.g. 32) using a fast method, without considering visibility, and chooses one using streaming RIS. Visibility is then tested for the final chosen sample. Considering visibility for each sample drawn would require tracing 32 rays, which would make it much more expensive. The intent is to reduce the number of rays traced, relying on the sample reuse in steps 2 and 3 to make up for the loss of quality caused by rejecting many of the rays due to shadowing. A large part of the initial efforts to optimize ReSTIR (to make it run in real-time on available hardware) went into reducing the cost of randomly sampling the lights. Glossy surfaces may require a larger number of samples, and combining light sampling with BRDF sampling (using MIS) may increase quality. Step 2 (temporal reuse) is sometimes skipped for off-line rendering, and the output of multiple repetitions of initial sampling and spatial reuse is averaged instead; this helps avoids artifacts due to correlations. Step 3 (spatial reuse) may be repeated multiple times in a single frame.

  Read more →
• 

  Inductive logic programming

  Inductive logic programming (ILP) is a subfield of symbolic artificial intelligence which uses logic programming as a uniform representation for examples, background knowledge and hypotheses. The term "inductive" here refers to philosophical (i.e. suggesting a theory to explain observed facts) rather than mathematical (i.e. proving a property for all members of a well-ordered set) induction. Given an encoding of the known background knowledge and a set of examples represented as a logical database of facts, an ILP system will derive a hypothesised logic program which entails all the positive and none of the negative examples. Schema: positive examples + negative examples + background knowledge ⇒ hypothesis. Bioinformatics and drug design have been highlighted as a principal application area of inductive logic programming techniques. == History == Building on earlier work on Inductive inference, Gordon Plotkin was the first to formalise induction in a clausal setting around 1970, adopting an approach of generalising from examples. In 1981, Ehud Shapiro introduced several ideas that would shape the field in his new approach of model inference, an algorithm employing refinement and backtracing to search for a complete axiomatisation of given examples. His first implementation was the Model Inference System in 1981: a Prolog program that inductively inferred Horn clause logic programs from positive and negative examples. The term Inductive Logic Programming was first introduced in a paper by Stephen Muggleton in 1990, defined as the intersection of machine learning and logic programming. Muggleton and Wray Buntine introduced predicate invention and inverse resolution in 1988. Several inductive logic programming systems that proved influential appeared in the early 1990s. FOIL, introduced by Ross Quinlan in 1990 was based on upgrading propositional learning algorithms AQ and ID3. Golem, introduced by Muggleton and Feng in 1990, went back to a restricted form of Plotkin's least generalisation algorithm. The Progol system, introduced by Muggleton in 1995, first implemented inverse entailment, and inspired many later systems. Aleph, a descendant of Progol introduced by Ashwin Srinivasan in 2001, is still one of the most widely used systems as of 2022. At around the same time, the first practical applications emerged, particularly in bioinformatics, where by 2000 inductive logic programming had been successfully applied to drug design, carcinogenicity and mutagenicity prediction, and elucidation of the structure and function of proteins. Unlike the focus on automatic programming inherent in the early work, these fields used inductive logic programming techniques from a viewpoint of relational data mining. The success of those initial applications and the lack of progress in recovering larger traditional logic programs shaped the focus of the field. Recently, classical tasks from automated programming have moved back into focus, as the introduction of meta-interpretative learning makes predicate invention and learning recursive programs more feasible. This technique was pioneered with the Metagol system introduced by Muggleton, Dianhuan Lin, Niels Pahlavi and Alireza Tamaddoni-Nezhad in 2014. This allows ILP systems to work with fewer examples, and brought successes in learning string transformation programs, answer set grammars and general algorithms. == Setting == Inductive logic programming has adopted several different learning settings, the most common of which are learning from entailment and learning from interpretations. In both cases, the input is provided in the form of background knowledge B, a logical theory (commonly in the form of clauses used in logic programming), as well as positive and negative examples, denoted E + {\textstyle E^{+}} and E − {\textstyle E^{-}} respectively. The output is given as a hypothesis H, itself a logical theory that typically consists of one or more clauses. The two settings differ in the format of examples presented. === Learning from entailment === As of 2022, learning from entailment is by far the most popular setting for inductive logic programming. In this setting, the positive and negative examples are given as finite sets E + {\textstyle E^{+}} and E − {\textstyle E^{-}} of positive and negated ground literals, respectively. A correct hypothesis H is a set of clauses satisfying the following requirements, where the turnstile symbol ⊨ {\displaystyle \models } stands for logical entailment: Completeness: B ∪ H ⊨ E + Consistency: B ∪ H ∪ E − ⊭ false {\displaystyle {\begin{array}{llll}{\text{Completeness:}}&B\cup H&\models &E^{+}\\{\text{Consistency: }}&B\cup H\cup E^{-}&\not \models &{\textit {false}}\end{array}}} Completeness requires any generated hypothesis H to explain all positive examples E + {\textstyle E^{+}} , and consistency forbids generation of any hypothesis H that is inconsistent with the negative examples E − {\textstyle E^{-}} , both given the background knowledge B. In Muggleton's setting of concept learning, "completeness" is referred to as "sufficiency", and "consistency" as "strong consistency". Two further conditions are added: "Necessity", which postulates that B does not entail E + {\textstyle E^{+}} , does not impose a restriction on H, but forbids any generation of a hypothesis as long as the positive facts are explainable without it. "Weak consistency", which states that no contradiction can be derived from B ∧ H {\textstyle B\land H} , forbids generation of any hypothesis H that contradicts the background knowledge B. Weak consistency is implied by strong consistency; if no negative examples are given, both requirements coincide. Weak consistency is particularly important in the case of noisy data, where completeness and strong consistency cannot be guaranteed. === Learning from interpretations === In learning from interpretations, the positive and negative examples are given as a set of complete or partial Herbrand structures, each of which are themselves a finite set of ground literals. Such a structure e is said to be a model of the set of clauses B ∪ H {\textstyle B\cup H} if for any substitution θ {\textstyle \theta } and any clause h e a d ← b o d y {\textstyle \mathrm {head} \leftarrow \mathrm {body} } in B ∪ H {\textstyle B\cup H} such that b o d y θ ⊆ e {\textstyle \mathrm {body} \theta \subseteq e} , h e a d θ ⊆ e {\displaystyle \mathrm {head} \theta \subseteq e} also holds. The goal is then to output a hypothesis that is complete, meaning every positive example is a model of B ∪ H {\textstyle B\cup H} , and consistent, meaning that no negative example is a model of B ∪ H {\textstyle B\cup H} . == Approaches to ILP == An inductive logic programming system is a program that takes as an input logic theories B , E + , E − {\displaystyle B,E^{+},E^{-}} and outputs a correct hypothesis H with respect to theories B , E + , E − {\displaystyle B,E^{+},E^{-}} . A system is complete if and only if for any input logic theories B , E + , E − {\displaystyle B,E^{+},E^{-}} any correct hypothesis H with respect to these input theories can be found with its hypothesis search procedure. Inductive logic programming systems can be roughly divided into two classes, search-based and meta-interpretative systems. Search-based systems exploit that the space of possible clauses forms a complete lattice under the subsumption relation, where one clause C 1 {\textstyle C_{1}} subsumes another clause C 2 {\textstyle C_{2}} if there is a substitution θ {\textstyle \theta } such that C 1 θ {\textstyle C_{1}\theta } , the result of applying θ {\textstyle \theta } to C 1 {\textstyle C_{1}} , is a subset of C 2 {\textstyle C_{2}} . This lattice can be traversed either bottom-up or top-down. === Bottom-up search === Bottom-up methods to search the subsumption lattice have been investigated since Plotkin's first work on formalising induction in clausal logic in 1970. Techniques used include least general generalisation, based on anti-unification, and inverse resolution, based on inverting the resolution inference rule. ==== Least general generalisation ==== A least general generalisation algorithm takes as input two clauses C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} and outputs the least general generalisation of C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} , that is, a clause C {\textstyle C} that subsumes C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} , and that is subsumed by every other clause that subsumes C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} . The least general generalisation can be computed by first computing all selections from C 1 {\textstyle C_{1}} and C 2 {\textstyle C_{2}} , which are pairs of literals ( L , M ) ∈ ( C 1 × C 2 ) {\displaystyle (L,M)\in (C_{1}\times C_{2})} sharing the same predicate symbol and negated/unnegated status. Then, the least general generalisation is obtained as the disjunction of the least general generalisations of the indi

  Read more →
• 

  Count sketch

  Count sketch is a type of dimensionality reduction that is particularly efficient in statistics, machine learning and algorithms. It was invented by Moses Charikar, Kevin Chen and Martin Farach-Colton in an effort to speed up the AMS Sketch by Alon, Matias and Szegedy for approximating the frequency moments of streams (these calculations require counting of the number of occurrences for the distinct elements of the stream). The sketch is nearly identical to the Feature hashing algorithm by John Moody, but differs in its use of hash functions with low dependence, which makes it more practical. In order to still have a high probability of success, the median trick is used to aggregate multiple count sketches, rather than the mean. These properties allow use for explicit kernel methods, bilinear pooling in neural networks and is a cornerstone in many numerical linear algebra algorithms. == Intuitive explanation == The inventors of this data structure offer the following iterative explanation of its operation: at the simplest level, the output of a single hash function s mapping stream elements q into {+1, -1} is feeding a single up/down counter C. After a single pass over the data, the frequency n ( q ) {\displaystyle n(q)} of a stream element q can be approximated, although extremely poorly, by the expected value E [ C ⋅ s ( q ) ] {\displaystyle {\mathbf {E}}[C\cdot s(q)]} ; a straightforward way to improve the variance of the previous estimate is to use an array of different hash functions s i {\displaystyle s_{i}} , each connected to its own counter C i {\displaystyle C_{i}} . For each i, the E [ C i ⋅ s i ( q ) ] = n ( q ) {\displaystyle {\mathbf {E}}[C_{i}\cdot s_{i}(q)]=n(q)} still holds, so averaging across the i range will tighten the approximation; the previous construct still has a major deficiency: if a lower-frequency-but-still-important output element a exhibits a hash collision with a high-frequency element even for one of the s i {\displaystyle s_{i}} hashes, n ( a ) {\displaystyle n(a)} estimate can be significantly affected. Avoiding this requires reducing the frequency of collision counter updates between any two distinct elements. This is achieved by replacing each C i {\displaystyle C_{i}} in the previous construct with an array of m counters (making the counter set into a two-dimensional matrix C i , j {\displaystyle C_{i,j}} ), with index j of a particular counter to be incremented/decremented selected via another set of hash functions h i {\displaystyle h_{i}} that map element q into the range {1..m}. Since E [ C i , h i ( q ) ⋅ s i ( q ) ] = n ( q ) {\displaystyle {\mathbf {E}}[C_{i,h_{i}(q)}\cdot s_{i}(q)]=n(q)} , averaging across all values of i will work. == Mathematical definition == 1. For constants w {\displaystyle w} and t {\displaystyle t} (to be defined later) independently choose d = 2 t + 1 {\displaystyle d=2t+1} random hash functions h 1 , … , h d {\displaystyle h_{1},\dots ,h_{d}} and s 1 , … , s d {\displaystyle s_{1},\dots ,s_{d}} such that h i : [ n ] → [ w ] {\displaystyle h_{i}:[n]\to [w]} and s i : [ n ] → { ± 1 } {\displaystyle s_{i}:[n]\to \{\pm 1\}} . It is necessary that the hash families from which h i {\displaystyle h_{i}} and s i {\displaystyle s_{i}} are chosen be pairwise independent. 2. For each item q i {\displaystyle q_{i}} in the stream, add s j ( q i ) {\displaystyle s_{j}(q_{i})} to the h j ( q i ) {\displaystyle h_{j}(q_{i})} th bucket of the j {\displaystyle j} th hash. At the end of this process, one has w d {\displaystyle wd} sums ( C i j ) {\displaystyle (C_{ij})} where C i , j = ∑ h i ( k ) = j s i ( k ) . {\displaystyle C_{i,j}=\sum _{h_{i}(k)=j}s_{i}(k).} To estimate the count of q {\displaystyle q} s one computes the following value: r q = median i = 1 d s i ( q ) ⋅ C i , h i ( q ) . {\displaystyle r_{q}={\text{median}}_{i=1}^{d}\,s_{i}(q)\cdot C_{i,h_{i}(q)}.} The values s i ( q ) ⋅ C i , h i ( q ) {\displaystyle s_{i}(q)\cdot C_{i,h_{i}(q)}} are unbiased estimates of how many times q {\displaystyle q} has appeared in the stream. The estimate r q {\displaystyle r_{q}} has variance O ( m i n { m 1 2 / w 2 , m 2 2 / w } ) {\displaystyle O(\mathrm {min} \{m_{1}^{2}/w^{2},m_{2}^{2}/w\})} , where m 1 {\displaystyle m_{1}} is the length of the stream and m 2 2 {\displaystyle m_{2}^{2}} is ∑ q ( ∑ i [ q i = q ] ) 2 {\displaystyle \sum _{q}(\sum _{i}[q_{i}=q])^{2}} . Furthermore, r q {\displaystyle r_{q}} is guaranteed to never be more than 2 m 2 / w {\displaystyle 2m_{2}/{\sqrt {w}}} off from the true value, with probability 1 − e − O ( t ) {\displaystyle 1-e^{-O(t)}} . === Vector formulation === Alternatively Count-Sketch can be seen as a linear mapping with a non-linear reconstruction function. Let M ( i ∈ [ d ] ) ∈ { − 1 , 0 , 1 } w × n {\displaystyle M^{(i\in [d])}\in \{-1,0,1\}^{w\times n}} , be a collection of d = 2 t + 1 {\displaystyle d=2t+1} matrices, defined by M h i ( j ) , j ( i ) = s i ( j ) {\displaystyle M_{h_{i}(j),j}^{(i)}=s_{i}(j)} for j ∈ [ w ] {\displaystyle j\in [w]} and 0 everywhere else. Then a vector v ∈ R n {\displaystyle v\in \mathbb {R} ^{n}} is sketched by C ( i ) = M ( i ) v ∈ R w {\displaystyle C^{(i)}=M^{(i)}v\in \mathbb {R} ^{w}} . To reconstruct v {\displaystyle v} we take v j ∗ = median i C j ( i ) s i ( j ) {\displaystyle v_{j}^{}={\text{median}}_{i}C_{j}^{(i)}s_{i}(j)} . This gives the same guarantees as stated above, if we take m 1 = ‖ v ‖ 1 {\displaystyle m_{1}=\|v\|_{1}} and m 2 = ‖ v ‖ 2 {\displaystyle m_{2}=\|v\|_{2}} . == Relation to Tensor sketch == The count sketch projection of the outer product of two vectors is equivalent to the convolution of two component count sketches. The count sketch computes a vector convolution C ( 1 ) x ∗ C ( 2 ) x T {\displaystyle C^{(1)}x\ast C^{(2)}x^{T}} , where C ( 1 ) {\displaystyle C^{(1)}} and C ( 2 ) {\displaystyle C^{(2)}} are independent count sketch matrices. Pham and Pagh show that this equals C ( x ⊗ x T ) {\displaystyle C(x\otimes x^{T})} – a count sketch C {\displaystyle C} of the outer product of vectors, where ⊗ {\displaystyle \otimes } denotes Kronecker product. The fast Fourier transform can be used to do fast convolution of count sketches. By using the face-splitting product such structures can be computed much faster than normal matrices.

  Read more →
• 

  Multiclass classification

  In machine learning and statistical classification, multiclass classification or multinomial classification is the problem of classifying instances into one of three or more classes (classifying instances into one of two classes is called binary classification). For example, deciding on whether an image is showing a banana, peach, orange, or an apple is a multiclass classification problem, with four possible classes (banana, peach, orange, apple), while deciding on whether an image contains an apple or not is a binary classification problem (with the two possible classes being: apple, no apple). While many classification algorithms (e.g., decision trees, k-NN, neural networks and multinomial logistic regression) naturally permit the use of more than two classes, some are by nature binary algorithms (e.g., classical binary support vector machine) and require decomposition strategies such as one-vs-all, one-vs-one, or ECOC to solve multiclass problems. Multiclass classification should not be confused with multi-label classification, where multiple labels are to be predicted for each instance (e.g., predicting that an image contains both an apple and an orange, in the previous example). == Better-than-random multiclass models == From the confusion matrix of a multiclass model, we can determine whether a model does better than chance. Let K ≥ 3 {\displaystyle K\geq 3} be the number of classes, O {\displaystyle {\mathcal {O}}} a set of observations, y ^ : O → { 1 , . . . , K } {\displaystyle {\hat {y}}:{\mathcal {O}}\to \{1,...,K\}} a model of the target variable y : O → { 1 , . . . , K } {\displaystyle y:{\mathcal {O}}\to \{1,...,K\}} and n i , j {\displaystyle n_{i,j}} be the number of observations in the set { y = i } ∩ { y ^ = j } {\displaystyle \{y=i\}\cap \{{\hat {y}}=j\}} . We note n i . = ∑ j n i , j {\displaystyle n_{i.}=\sum _{j}n_{i,j}} , n . j = ∑ i n i , j {\displaystyle n_{.j}=\sum _{i}n_{i,j}} , n = ∑ j n . j = ∑ i n i . {\displaystyle n=\sum _{j}n_{.j}=\sum _{i}n_{i.}} , λ i = n i . n {\displaystyle \lambda _{i}={\frac {n_{i.}}{n}}} and μ j = n . j n {\displaystyle \mu _{j}={\frac {n_{.j}}{n}}} . It is assumed that the confusion matrix ( n i , j ) i , j {\displaystyle (n_{i,j})_{i,j}} contains at least one non-zero entry in each row, that is λ i > 0 {\displaystyle \lambda _{i}>0} for any i {\displaystyle i} . Finally we call "normalized confusion matrix" the matrix of conditional probabilities ( P ( y ^ = j ∣ y = i ) ) i , j = ( n i , j n i . ) i , j {\displaystyle (\mathbb {P} ({\hat {y}}=j\mid y=i))_{i,j}=\left({\frac {n_{i,j}}{n_{i.}}}\right)_{i,j}} . === Intuitive explanation === The lift is a way of measuring the deviation from independence of two events A {\displaystyle A} and B {\displaystyle B} : L i f t ( A , B ) = P ( A ∩ B ) P ( A ) P ( B ) = P ( A ∣ B ) P ( A ) = P ( B ∣ A ) P ( B ) {\displaystyle \mathrm {Lift} (A,B)={\frac {\mathbb {P} (A\cap B)}{\mathbb {P} (A)\mathbb {P} (B)}}={\frac {\mathbb {P} (A\mid B)}{\mathbb {P} (A)}}={\frac {\mathbb {P} (B\mid A)}{\mathbb {P} (B)}}} We have L i f t ( A , B ) > 1 {\displaystyle \mathrm {Lift} (A,B)>1} if and only if events A {\displaystyle A} and B {\displaystyle B} occur simultaneously with a greater probability than if they were independent. In other words, if one of the two events occurs, the probability of observing the other event increases. A first condition to satisfy is to have L i f t ( y = i , y ^ = i ) ≥ 1 {\displaystyle \mathrm {Lift} (y=i,{\hat {y}}=i)\geq 1} for any i {\displaystyle i} . And the quality of a model (better or worse than chance) does not change if we over- or undersample the dataset, that is if we multiply each row R i {\displaystyle R_{i}} of the confusion matrix by a constant c i {\displaystyle c_{i}} . Thus the second condition is that the necessary and sufficient conditions for doing better than chance need only depend on the normalized confusion matrix. The condition on lifts can be reformulated with One versus Rest binary models : for any i {\displaystyle i} , we define the binary target variable y i {\displaystyle y_{i}} which is the indicator of event { y = i } {\displaystyle \{y=i\}} , and the binary model y ^ i {\displaystyle {\hat {y}}_{i}} of y i {\displaystyle y_{i}} which is the indicator of event { y ^ = i } {\displaystyle \{{\hat {y}}=i\}} . Each of the y ^ i {\displaystyle {\hat {y}}_{i}} models is a "One versus Rest" model. L i f t ( y = i , y ^ = i ) {\displaystyle \mathrm {Lift} (y=i,{\hat {y}}=i)} only depends on the events { y = i } {\displaystyle \{y=i\}} and { y ^ = i } {\displaystyle \{{\hat {y}}=i\}} , so merging or not merging the other classes doesn't change its value. We therefore have L i f t ( y = i , y ^ = i ) = L i f t ( y i = 1 , y ^ i = 1 ) {\displaystyle \mathrm {Lift} (y=i,{\hat {y}}=i)=\mathrm {Lift} (y_{i}=1,{\hat {y}}_{i}=1)} and the first condition is that all binary One versus Rest models are better than chance. ==== Example ==== If K = 2 {\displaystyle K=2} and 2 is the class of interest , the normalized confusion matrix is ( s p e c i f i c i t y 1 − s p e c i f i c i t y 1 − s e n s i t i v i t y s e n s i t i v i t y ) {\displaystyle {\begin{pmatrix}\mathrm {specificity} &1-\mathrm {specificity} \\1-\mathrm {sensitivity} &\mathrm {sensitivity} \end{pmatrix}}} and we have L i f t ( y = 1 , y ^ = 1 ) − 1 = P ( y = y ^ = 1 ) λ 1 μ 1 − 1 = n 1 , 1 n n 1. n .1 − 1 {\displaystyle \mathrm {Lift} (y=1,{\hat {y}}=1)-1={\frac {\mathbb {P} (y={\hat {y}}=1)}{\lambda _{1}\mu _{1}}}-1={\frac {n_{1,1}n}{n_{1.}n_{.1}}}-1} = n 1 , 1 ( n 1 , 1 + n 1 , 2 + n 2 , 1 + n 2 , 2 ) − ( n 1 , 1 + n 1 , 2 ) ( n 1 , 1 + n 2 , 1 ) n 1. n .1 = n 1 , 1 n 2 , 2 − n 1 , 2 n 2 , 1 n 1. n .1 {\displaystyle ={\frac {n_{1,1}(n_{1,1}+n_{1,2}+n_{2,1}+n_{2,2})-(n_{1,1}+n_{1,2})(n_{1,1}+n_{2,1})}{n_{1.}n_{.1}}}={\frac {n_{1,1}n_{2,2}-n_{1,2}n_{2,1}}{n_{1.}n_{.1}}}} . Thus L i f t ( y = 1 , y ^ = 1 ) ≥ 1 ⟺ n 1 , 1 n 2 , 2 − n 1 , 2 n 2 , 1 ≥ 0 {\displaystyle \mathrm {Lift} (y=1,{\hat {y}}=1)\geq 1\iff n_{1,1}n_{2,2}-n_{1,2}n_{2,1}\geq 0} . Similarly, by swapping the roles of 1 and 2, we find that L i f t ( y = 2 , y ^ = 2 ) ≥ 1 ⟺ n 1 , 1 n 2 , 2 − n 1 , 2 n 2 , 1 ≥ 0 {\displaystyle \mathrm {Lift} (y=2,{\hat {y}}=2)\geq 1\iff n_{1,1}n_{2,2}-n_{1,2}n_{2,1}\geq 0} . Dividing by n 1. n 2. {\displaystyle n_{1.}n_{2.}} we find that the necessary and sufficient condition on the normalized confusion matrix is s e n s i t i v i t y s p e c i f i c i t y − ( 1 − s e n s i t i v i t y ) ( 1 − s p e c i f i c i t y ) ≥ 0 ⟺ s e n s i t i v i t y + s p e c i f i c i t y − 1 ≥ 0 ⟺ J ≥ 0 {\displaystyle \mathrm {sensitivity} \ \mathrm {specificity} -(1-\mathrm {sensitivity} )(1-\mathrm {specificity} )\geq 0\iff \mathrm {sensitivity} +\mathrm {specificity} -1\geq 0\iff J\geq 0} . This brings us back to the classical binary condition: Youden's J must be positive (or zero for random models). === Random models === A random model is a model that is independent of the target variable. This property is easily reformulated with the confusion matrix. This proposition shows that the model y ^ {\displaystyle {\hat {y}}} of y {\displaystyle y} is uninformative if and only if there are two families of numbers ( α i ) i {\displaystyle (\alpha _{i})_{i}} and ( β j ) j {\displaystyle (\beta _{j})_{j}} such that P ( { y = i } ∩ { y ^ = j } ) = α i β j {\displaystyle \mathbb {P} (\{y=i\}\cap \{{\hat {y}}=j\})=\alpha _{i}\beta _{j}} for any i {\displaystyle i} and j {\displaystyle j} . === Multiclass likelihood ratios and diagnostic odds ratios === We define generalized likelihood ratios calculated from the normalized confusion matrix: for any i {\displaystyle i} and j ≠ i {\displaystyle j\not =i} , let L R i , j = P ( y ^ = j ∣ y = j ) P ( y ^ = j ∣ y = i ) {\displaystyle \mathrm {LR} _{i,j}={\frac {\mathbb {P} ({\hat {y}}=j\mid y=j)}{\mathbb {P} ({\hat {y}}=j\mid y=i)}}} . When K = 2 {\displaystyle K=2} , if 2 is the class of interest,, we find the classical likelihood ratios L R 1 , 2 = L R + {\displaystyle \mathrm {LR} _{1,2}=\mathrm {LR} _{+}} and L R 2 , 1 = 1 L R − {\displaystyle \mathrm {LR} _{2,1}={\frac {1}{\mathrm {LR} _{-}}}} . Multiclass diagnostic odds ratios can also be defined using the formula D O R i , j = D O R j , i = L R i , j L R j , i = n i , i n j , j n i , j n j , i = P ( y ^ = j ∣ y = j ) / P ( y ^ = i ∣ y = j ) P ( y ^ = j ∣ y = i ) / P ( y ^ = i ∣ y = i ) {\displaystyle \mathrm {DOR} _{i,j}=\mathrm {DOR} _{j,i}=\mathrm {LR} _{i,j}\mathrm {LR} _{j,i}={\frac {n_{i,i}n_{j,j}}{n_{i,j}n_{j,i}}}={\frac {\mathbb {P} ({\hat {y}}=j\mid y=j)/\mathbb {P} ({\hat {y}}=i\mid y=j)}{\mathbb {P} ({\hat {y}}=j\mid y=i)/\mathbb {P} ({\hat {y}}=i\mid y=i)}}} We saw above that a better-than-chance model (or a random model) must verify L i f t ( y = i , y ^ = i ) ≥ 1 {\displaystyle \mathrm {Lift} (y=i,{\hat {y}}=i)\geq 1} for any i {\displaystyle i} and λ i {\displaystyle \lambda _{i}} . According to the previous corollary, likelihood ratios are thus greater

  Read more →
• 

  Ameca (robot)

  Ameca is a robotic humanoid created in 2021 by Engineered Arts, headquarters in Falmouth, Cornwall, United Kingdom. The project commenced in February 2021, and the first public demonstration was at the CES 2022 show in Las Vegas. Ameca's appearance features grey rubber skin on the face and hands, and is specifically designed to appear genderless. In 2024, an Ameca unit was installed in Edinburgh in the UK to reside at the National Robotarium. Ameca generation 3 has been released and showcased at ICRA 2025 along with Ami. == History == The first generation of Ameca was developed at Engineered Arts headquarters in Falmouth, Cornwall, United Kingdom. The project started in February 2021, with the first video revealed publicly on 1 December 2021. Ameca gained widespread attention on Twitter and TikTok ahead of its first public demonstration at the Consumer Electronics Show 2022, where it was covered by CNET and other news outlets. In 2022, Ameca presented an Alternative Christmas message by British TV Channel 4 for Christmas Day. Ameca was associated with the Museum of the Future's robotic family, where it could interact with visitors. In 2024, an Ameca unit was installed in Edinburgh in the UK to reside at the National Robotarium. In January 2026, Ameca served as an ambassador for the European Space Agency (ESA) at the 18th European Space Conference. == Features == It is designed as a platform for further developing robotics technologies involving human-robot interaction. utilizes embedded microphones, binocular eye mounted cameras, a chest camera and facial recognition software to interact with the public. Interactions can be governed by either OpenAI's GPT-3 or human telepresence. It also features articulated motorized arms, fingers, neck and facial features. Ameca's appearance features grey rubber skin on the face and hands, and is specifically designed to appear genderless. == Public appearances == Computer History Museum, California Heinz Nixdorf MuseumsForum, Paderborn, Germany Copernicus Science Center, Warsaw, Poland Museum of the Future, Dubai Consumer Electronics Show 2022 Deutsches Museum Nuremberg OMR Festival 2022 Hosted by Vodafone GITEX 2022 International Conference on Robotics and Automation 2023 International Telecommunication Union AI for Good Global Summit 2023 Sphere (Not Ameca, Custom humanoid named Aura built on Ameca technology)

  Read more →
• 

  Causal Markov condition

  The Causal Markov (CM) condition states that, conditional on the set of all its direct causes, a node is independent of all variables which are not effects or direct causes of that node. In the event that the structure of a Bayesian network accurately depicts causality, the two conditions are equivalent. This is related to the Markov condition, an assumption made in Bayesian probability theory, that every node in a Bayesian network is conditionally independent of its nondescendants, given its parents. Stated loosely, it is assumed that a node has no bearing on nodes which do not descend from it. In a DAG, this local Markov condition is equivalent to the global Markov condition, which states that d-separations in the graph also correspond to conditional independence relations. This also means that a node is conditionally independent of the entire network, given its Markov blanket. A network may accurately embody the Markov condition without depicting causality, in which case it should not be assumed to embody the causal Markov condition. == Motivation == Statisticians are enormously interested in the ways in which certain events and variables are connected. The precise notion of what constitutes a cause and effect is necessary to understand the connections between them. The central idea behind the philosophical study of probabilistic causation is that causes raise the probabilities of their effects, all else being equal. A deterministic interpretation of causation means that if A causes B, then A must always be followed by B. In this sense, smoking does not cause cancer because some smokers never develop cancer. On the other hand, a probabilistic interpretation simply means that causes raise the probability of their effects. In this sense, changes in meteorological readings associated with a storm do cause that storm, since they raise its probability. (However, simply looking at a barometer does not change the probability of the storm, for a more detailed analysis, see:). == Examples == In a simple view, releasing one's hand from a hammer causes the hammer to fall. However, doing so in outer space does not produce the same outcome, calling into question if releasing one's fingers from a hammer always causes it to fall. A causal graph could be created to acknowledge that both the presence of gravity and the release of the hammer contribute to its falling. However, it would be very surprising if the surface underneath the hammer affected its falling. This essentially states the Causal Markov Condition, that given the existence of gravity the release of the hammer, it will fall regardless of what is beneath it. == Implications == === Dependence and Causation === It follows from the definition that if X and Y are in V and are probabilistically dependent, then either X causes Y, Y causes X, or X and Y are both effects of some common cause Z in V. This definition was seminally introduced by Hans Reichenbach as the Common Cause Principle (CCP). === Screening === It once again follows from the definition that the parents of X screen X from other "indirect causes" of X (parents of Parents(X)) and other effects of Parents(X) which are not also effects of X.

  Read more →
• 

  Tensor product network

  A tensor product network, in artificial neural networks, is a network that exploits the properties of tensors to model associative concepts such as variable assignment. Orthonormal vectors are chosen to model the ideas (such as variable names and target assignments), and the tensor product of these vectors construct a network whose mathematical properties allow the user to easily extract the association from it.

  Read more →
• 

  Joseph Nechvatal

  Joseph Nechvatal (born January 15, 1951) is an American post-conceptual digital artist and art theoretician who creates computer-assisted paintings and computer animations, often using custom computer viruses. == Life and work == Joseph Nechvatal was born in Chicago. He studied fine art and philosophy at Southern Illinois University Carbondale, Cornell University, and Columbia University. He earned a Doctor of Philosophy in Philosophy of Art and Technology at the Planetary Collegium at University of Wales, Newport and has taught art theory and art history at the School of Visual Arts. He has had many solo exhibitions and is one of five artists that art historian Patrick Frank examines in his 2024 book Art of the 1980s: As If the Digital Mattered. His work in the late 1970s and early 1980s chiefly consisted of postminimal gray palimpsest-like drawings that were often photo-mechanically enlarged. Beginning in 1979 he became associated with the artist group Colab, organized the Public Arts International/Free Speech series, and helped established the non-profit group ABC No Rio. In 1983 he co-founded the avant-garde electronic art music audio project Tellus Audio Cassette Magazine. In 1984, Nechvatal began work on an opera called XS: The Opera Opus (1984-6) with the no wave musical composer Rhys Chatham. He began using computers and robotics to make post-conceptual paintings in 1986 and later, in his signature work, began to employ self-created computer viruses. From 1991 to 1993, he was artist-in-residence at the Louis Pasteur Atelier in Arbois, France and at the Saline Royale/Ledoux Foundation's computer lab. There he worked on The Computer Virus Project, his first artistic experiment with computer viruses and computer virus animation. He exhibited computer-robotic paintings at Documenta 8 in 1987. In 2002 he extended his experimentation into viral artificial life through a collaboration with the programmer Stephane Sikora of music2eye in a work called the Computer Virus Project II. Nechvatal has also created a noise music work called viral symphOny, a collaborative sound symphony created by using his computer virus software at the Institute for Electronic Arts at Alfred University. In 2021 Pentiments released Nechvatal's retrospective audio cassette called Selected Sound Works (1981-2021) and in 2022 his The Viral Tempest, a double vinyl LP of new audio work. In 2025, he joined the roster of artists/musicians at Table of the Elements with two CD/book releases: Selected Sound Works (1981-2021) and The Marriage of Orlando and Artaud, Even. From 1999 to 2013, Nechvatal taught art theories of immersive virtual reality and the viractual at the School of Visual Arts in New York City (SVA). A book of his collected essays entitled Towards an Immersive Intelligence: Essays on the Work of Art in the Age of Computer Technology and Virtual Reality (1993–2006) was published by Edgewise Press in 2009. Also in 2009, his virtual reality art theory and art history book Immersive Ideals / Critical Distances was published. In 2011, his book Immersion Into Noise was published by Open Humanities Press in conjunction with the University of Michigan Library's Scholarly Publishing Office. Nechvatal has also published three books with Punctum Books: Minóy (noise music—ed.—2014), Destroyer of Naivetés (poetry—2015), and Styling Sagaciousness (poetry—2022). In 2023 his art theory cybersex farce novella venus©~Ñ~vibrator, even was published by Orbis Tertius Press The Joseph Nechvatal archive is housed at The Fales Library Downtown Collection at the NYU Special Collections Library in New York City. === Viractualism === Viractualism is an art theory concept developed by Nechvatal in 1999 from Ph.D. research Nechvatal conducted at the Planetary Collegium at University of Wales, Newport. There he developed his concept of the viractual, which strives to create an interface between the actual and the virtual.

  Read more →
• 

  Pixel binning

  Pixel binning, also known as binning, is a process image sensors of digital cameras use to combine adjacent pixels throughout an image, by summing or averaging their values, during or after readout. It improves low-light performance while still allowing for highly detailed photographs in good light. Charge from adjacent pixels in CCD or charge-coupled device image sensors and some other image sensors can be combined during readout, increasing the line rate or frame rate. In the context of image processing, binning is the procedure of combining clusters of adjacent pixels, throughout an image, into single pixels. For example, in 2×2 binning, an array of 4 pixels becomes a single larger pixel, reducing the number of pixels to 1/4 and halving the image resolution in each dimension. The result can be the sum, average, median, minimum, or maximum value of the cluster. Some systems use more advanced algorithms such as considering the values of nearby pixels, edge detection, self-claimed "AI", etc. to increase the perceived visual quality of the final downsized image. This aggregation, although associated with loss of information, reduces the amount of data to be processed, facilitating analysis. The binned image has lower resolution, but the relative noise level in each pixel is generally reduced. == History == Normally, an increase in megapixel count on a constant image sensor size would lead to a sacrifice of the surface size of the individual pixels, which would result in each pixel being able to catch less light in the same time, thus leading to a darker and/or noisier image in low light (given the same exposure time). In the past, camera manufacturers had to compromise between low-light performance and the amount of detail in good light, by dropping the megapixel count like HTC did in 2013 with their four-megapixel "UltraPixel" camera. However, this results in less detailed images in daylight where enough light is available. With pixel binning, the camera has "the best of both worlds", meaning both the benefit of high detail in good light and the benefit of high brightness in low light. In low light, the surfaces of four or more pixels can act as one large pixel that catches far more light. For example, some smartphones such as the Samsung Galaxy A15 are able to capture photographs with up to fifty megapixels in daylight. However, in low light, the individual pixels would be too small to capture the light needed for a bright image with the short exposure time available for handheld shooting. Therefore, with pixel binning activated, the 50-megapixel image sensor acts as a 12.5-megapixel image sensor, a quarter of its original resolution, with an accordingly larger surface area per pixel.

  Read more →
• 

  Multi expression programming

  Multi Expression Programming (MEP) is an evolutionary algorithm for generating mathematical functions describing a given set of data. MEP is a Genetic Programming variant encoding multiple solutions in the same chromosome. MEP representation is not specific (multiple representations have been tested). In the simplest variant, MEP chromosomes are linear strings of instructions. This representation was inspired by Three-address code. MEP strength consists in the ability to encode multiple solutions, of a problem, in the same chromosome. In this way, one can explore larger zones of the search space. For most of the problems this advantage comes with no running-time penalty compared with genetic programming variants encoding a single solution in a chromosome. == Representation == MEP chromosomes are arrays of instructions represented in Three-address code format. Each instruction contains a variable, a constant, or a function. If the instruction is a function, then the arguments (given as instruction's addresses) are also present. === Example of MEP program === Here is a simple MEP chromosome (labels on the left side are not a part of the chromosome): 1: a 2: b 3: + 1, 2 4: c 5: d 6: + 4, 5 7: 3, 5 == Fitness computation == When the chromosome is evaluated it is unclear which instruction will provide the output of the program. In many cases, a set of programs is obtained, some of them being completely unrelated (they do not have common instructions). For the above chromosome, here is the list of possible programs obtained during decoding: E1 = a, E2 = b, E4 = c, E5 = d, E3 = a + b. E6 = c + d. E7 = (a + b) d. Each instruction is evaluated as a possible output of the program. The fitness (or error) is computed in a standard manner. For instance, in the case of symbolic regression, the fitness is the sum of differences (in absolute value) between the expected output (called target) and the actual output. == Fitness assignment process == Which expression will represent the chromosome? Which one will give the fitness of the chromosome? In MEP, the best of them (which has the lowest error) will represent the chromosome. This is different from other GP techniques: In Linear genetic programming the last instruction will give the output. In Cartesian Genetic Programming the gene providing the output is evolved like all other genes. Note that, for many problems, this evaluation has the same complexity as in the case of encoding a single solution in each chromosome. Thus, there is no penalty in running time compared to other techniques. == Software == === MEPX === MEPX is a cross-platform (Windows, macOS, and Linux Ubuntu) free software for the automatic generation of computer programs. It can be used for data analysis, particularly for solving symbolic regression, statistical classification and time-series problems. === libmep === Libmep is a free and open source library implementing Multi Expression Programming technique. It is written in C++. === hmep === hmep is a new open source library implementing Multi Expression Programming technique in Haskell programming language.

  Read more →
• 

  Prefrontal cortex basal ganglia working memory

  Prefrontal cortex basal ganglia working memory (PBWM) is an algorithm that models working memory in the prefrontal cortex and the basal ganglia. It can be compared to long short-term memory (LSTM) in functionality, but is more biologically explainable. It uses the primary value learned value model to train prefrontal cortex working-memory updating system, based on the biology of the prefrontal cortex and basal ganglia. It is used as part of the Leabra framework and was implemented in Emergent in 2019. == Abstract == The prefrontal cortex has long been thought to subserve both working memory (the holding of information online for processing) and "executive" functions (deciding how to manipulate working memory and perform processing). Although many computational models of working memory have been developed, the mechanistic basis of executive function remains elusive. PBWM is a computational model of the prefrontal cortex to control both itself and other brain areas in a strategic, task-appropriate manner. These learning mechanisms are based on subcortical structures in the midbrain, basal ganglia and amygdala, which together form an actor/critic architecture. The critic system learns which prefrontal representations are task-relevant and trains the actor, which in turn provides a dynamic gating mechanism for controlling working memory updating. Computationally, the learning mechanism is designed to simultaneously solve the temporal and structural credit assignment problems. The model's performance compares favorably with standard backpropagation-based temporal learning mechanisms on the challenging 1-2-AX working memory task, and other benchmark working memory tasks. == Model == First, there are multiple separate stripes (groups of units) in the prefrontal cortex and striatum layers. Each stripe can be independently updated, such that this system can remember several different things at the same time, each with a different "updating policy" of when memories are updated and maintained. The active maintenance of the memory is in prefrontal cortex (PFC), and the updating signals (and updating policy more generally) come from the striatum units (a subset of basal ganglia units). PVLV provides reinforcement learning signals to train up the dynamic gating system in the basal ganglia. === Sensory input and motor output === The sensory input is connected to the posterior cortex which is connected to the motor output. The sensory input is also linked to the PVLV system. === Posterior cortex === The posterior cortex form the hidden layers of the input/output mapping. The PFC is connected with the posterior cortex to contextualize this input/output mapping. === PFC === The PFC (for output gating) has a localist one-to-one representation of the input units for every stripe. Thus, you can look at these PFC representations and see directly what the network is maintaining. The PFC maintains the working memory needed to perform the task. === Striatum === This is the dynamic gating system representing the striatum units of the basal ganglia. Every even-index unit within a stripe represents "Go", while the odd-index units represent "NoGo." The Go units cause updating of the PFC, while the NoGo units cause the PFC to maintain its existing memory representation. There are groups of units for every stripe. In the PBWM model in Emergent, the matrices represent the striatum. === PVLV === All of these layers are part of PVLV system. The PVLV system controls the dopaminergic modulation of the basal ganglia (BG). Thus, BG/PVLV form an actor-critic architecture where the PVLV system learns when to update. ==== SNrThal ==== SNrThal represents the substantia nigra pars reticulata (SNr) and the associated area of the thalamus, which produce a competition among the Go/NoGo units within a given stripe and mediates competition using k-winners-take-all dynamics. If there is more overall Go activity in a given stripe, then the associated SNrThal unit gets activated, and it drives updating in PFC. For every stripe, there is one unit in SNrThal. ==== VTA and SNc ==== Ventral tegmental area (VTA) and substantia nigra pars compacta (SNc) are part of the dopamine layer. This layer models midbrain dopamine neurons. They control the dopaminergic modulation of the basal ganglia.

  Read more →
• 

  Latent and observable variables

  In statistics, latent variables (from Latin: present participle of lateo 'lie hidden') are variables that can only be inferred indirectly through a mathematical model from other observable variables that can be directly observed or measured. Such latent variable models are used in many disciplines, including engineering, medicine, ecology, physics, machine learning/artificial intelligence, natural language processing, bioinformatics, chemometrics, demography, economics, management, political science, psychology and the social sciences. Latent variables may correspond to aspects of physical reality. These could in principle be measured, but may not be for practical reasons. Among the earliest expressions of this idea is Francis Bacon's polemic the Novum Organum, itself a challenge to the more traditional logic expressed in Aristotle's Organon: But the latent process of which we speak, is far from being obvious to men’s minds, beset as they now are. For we mean not the measures, symptoms, or degrees of any process which can be exhibited in the bodies themselves, but simply a continued process, which, for the most part, escapes the observation of the senses. In this situation, the term hidden variables is commonly used, reflecting the fact that the variables are meaningful, but not observable. Other latent variables correspond to abstract concepts, like categories, behavioral or mental states, or data structures. The terms hypothetical variables or hypothetical constructs may be used in these situations. The use of latent variables can serve to reduce the dimensionality of data. Many observable variables can be aggregated in a model to represent an underlying concept, making it easier to understand the data. In this sense, they serve a function similar to that of scientific theories. At the same time, latent variables link observable "sub-symbolic" data in the real world to symbolic data in the modeled world. == Examples == === Psychology === Latent variables, as created by factor analytic methods, generally represent "shared" variance, or the degree to which variables "move" together. Variables that have no correlation cannot result in a latent construct based on the common factor model. The "Big Five personality traits" have been inferred using factor analysis. extraversion spatial ability wisdom: “Two of the more predominant means of assessing wisdom include wisdom-related performance and latent variable measures.” Spearman's g, or the general intelligence factor in psychometrics === Economics === Examples of latent variables from the field of economics include quality of life, business confidence, morale, happiness and conservatism: these are all variables which cannot be measured directly. However, by linking these latent variables to other, observable variables, the values of the latent variables can be inferred from measurements of the observable variables. Quality of life is a latent variable which cannot be measured directly, so observable variables are used to infer quality of life. Observable variables to measure quality of life include wealth, employment, environment, physical and mental health, education, recreation and leisure time, and social belonging. === Medicine === Latent-variable methodology is used in many branches of medicine. A class of problems that naturally lend themselves to latent variables approaches are longitudinal studies where the time scale (e.g. age of participant or time since study baseline) is not synchronized with the trait being studied. For such studies, an unobserved time scale that is synchronized with the trait being studied can be modeled as a transformation of the observed time scale using latent variables. Examples of this include disease progression modeling and modeling of growth (see box). == Inferring latent variables == There exists a range of different model classes and methodology that make use of latent variables and allow inference in the presence of latent variables. Models include: linear mixed-effects models and nonlinear mixed-effects models Hidden Markov models Factor analysis Item response theory Analysis and inference methods include: Principal component analysis Instrumented principal component analysis Partial least squares regression Latent semantic analysis and probabilistic latent semantic analysis EM algorithms Metropolis–Hastings algorithm === Bayesian algorithms and methods === Bayesian statistics is often used for inferring latent variables. Latent Dirichlet allocation The Chinese restaurant process is often used to provide a prior distribution over assignments of objects to latent categories. The Indian buffet process is often used to provide a prior distribution over assignments of latent binary features to objects.

  Read more →
• 

  Skipper (computer software)

  Skipper is a visualization tool and code/schema generator for PHP ORM frameworks like Doctrine2, Doctrine, Propel, and CakePHP, which are used to create database abstraction layer. Skipper is developed by Czech company Inventic, s.r.o. based in Brno, and was known as ORM Designer prior to rebranding in 2014. == Overview == Generates visual model from the schema definition files Repetitive import/export of schema definitions in supported formats (XML, YML, PHP annotations) Schema definition files are automatically generated from the visual model Visual representation uses ER diagram extended by concepts of inheritance and many-to-many Supports customization using .xml configuration files and JavaScript Does not support direct connections to the database Crude and simplistic visual representation and menus == Architecture == Skipper was built on the Qt framework. Import/export of the schema definitions uses XSL transformations powered by LibXslt library. Imported source files are first converted to XML format: no conversion for XML, simple conversion for YML, creating the Abstract Syntax Tree and its subsequent conversion to XML for PHP annotations. The import/export scripts are configured in JavaScript and can be freely customized. == Supported ORM frameworks == Frameworks supported for visual model and schema files generation: Doctrine2 Doctrine CakePHP == History == Skipper was created as an internal tool for the web applications developed by Inventic. It was first published as a commercial tool under the name ORM Designer in 2009. Application was reworked and optimized in January 2013, and released as ORM Designer 2. In May 2013 ORM Designer became part of the South Moravian Innovation Center Incubator program (support program for innovative technological startups). In June 2014, ORM Designer version 3 was released and rebranded under the name of Skipper

  Read more →
• 

  Relationship square

  In statistics, the relationship square is a graphical representation for use in the factorial analysis of a table individuals x variables. This representation completes classical representations provided by principal component analysis (PCA) or multiple correspondence analysis (MCA), namely those of individuals, of quantitative variables (correlation circle) and of the categories of qualitative variables (at the centroid of the individuals who possess them). It is especially important in factor analysis of mixed data (FAMD) and in multiple factor analysis (MFA). == Definition of relationship square in the MCA frame == The first interest of the relationship square is to represent the variables themselves, not their categories, which is all the more valuable as there are many variables. For this, we calculate for each qualitative variable j {\displaystyle j} and each factor F s {\displaystyle F_{s}} ( F s {\displaystyle F_{s}} , rank s {\displaystyle s} factor, is the vector of coordinates of the individuals along the axis of rank s {\displaystyle s} ; in PCA, F s {\displaystyle F_{s}} is called principal component of rank s {\displaystyle s} ), the square of the correlation ratio between the F s {\displaystyle F_{s}} and the variable j {\displaystyle j} , usually denoted : η 2 ( j , F s ) {\displaystyle \eta ^{2}(j,F_{s})} Thus, to each factorial plane, we can associate a representation of qualitative variables themselves. Their coordinates being between 0 and 1, the variables appear in the square having as vertices the points (0,0), ( 0,1), (1,0) and (1,1). == Example in MCA == Six individuals ( i 1 , … , i 6 ) {\displaystyle i_{1},\ldots ,i_{6})} are described by three variables ( q 1 , q 2 , q 3 ) {\displaystyle (q_{1},q_{2},q_{3})} having respectively 3, 2 and 3 categories. Example : the individual i 1 {\displaystyle i_{1}} possesses the category a {\displaystyle a} of q 1 {\displaystyle q_{1}} , d {\displaystyle d} of q 2 {\displaystyle q_{2}} and f {\displaystyle f} of q 3 {\displaystyle q_{3}} . Applied to these data, the MCA function included in the R Package FactoMineR provides to the classical graph in Figure 1. The relationship square (Figure 2) makes easier the reading of the classic factorial plane. It indicates that: The first factor is related to the three variables but especially q 3 {\displaystyle q_{3}} (which have a very high coordinate along the first axis) and then q 2 {\displaystyle q_{2}} . The second factor is related only to q 1 {\displaystyle q_{1}} and q 3 {\displaystyle q_{3}} (and not to q 2 {\displaystyle q_{2}} which has a coordinate along axis 2 equal to 0) and that in a strong and equal manner. All this is visible on the classic graphic but not so clearly. The role of the relationship square is first to assist in reading a conventional graphic. This is precious when the variables are numerous and possess numerous coordinates. == Extensions == This representation may be supplemented with those of quantitative variables, the coordinates of the latter being the square of correlation coefficients (and not of correlation ratios). Thus, the second advantage of the relationship square lies in the ability to represent simultaneously quantitative and qualitative variables. The relationship square can be constructed from any factorial analysis of a table individuals x variables. In particular, it is (or should be) used systematically: in multiple correspondences analysis (MCA); in principal components analysis (PCA) when there are many supplementary variables; in factor analysis of mixed data (FAMD). An extension of this graphic to groups of variables (how to represent a group of variables by a single point ?) is used in Multiple Factor Analysis (MFA) == History == The idea of representing the qualitative variables themselves by a point (and not the categories) is due to Brigitte Escofier. The graphic as it is used now has been introduced by Brigitte Escofier and Jérôme Pagès in the framework of multiple factor analysis == Conclusion == In MCA, the relationship square provides a synthetic view of the connections between mixed variables, all the more valuable as there are many variables having many categories. This representation iscan be useful in any factorial analysis when there are numerous mixed variables, active and/or supplementary.

  Read more →
• 

  Automated Pain Recognition

  Automated Pain Recognition (APR) is a method for objectively measuring pain and at the same time represents an interdisciplinary research area that comprises elements of medicine, psychology, psychobiology, and computer science. The focus is on computer-aided objective recognition of pain, implemented on the basis of machine learning. Automated pain recognition allows for the valid, reliable detection and monitoring of pain in people who are unable to communicate verbally. The underlying machine learning processes are trained and validated in advance by means of unimodal or multimodal body signals. Signals used to detect pain may include facial expressions or gestures and may also be of a (psycho-)physiological or paralinguistic nature. To date, the focus has been on identifying pain intensity, but visionary efforts are also being made to recognize the quality, site, and temporal course of pain. However, the clinical implementation of this approach is a controversial topic in the field of pain research. Critics of automated pain recognition argue that pain diagnosis can only be performed subjectively by humans. == Background == Pain diagnosis under conditions where verbal reporting is restricted - such as in verbally and/or cognitively impaired people or in patients who are sedated or mechanically ventilated - is based on behavioral observations by trained professionals. However, all known observation procedures (e.g., Zurich Observation Pain Assessment (ZOPA)); Pain Assessment in Advanced Dementia Scale (PAINAD) require a great deal of specialist expertise. These procedures can be made more difficult by perception- and interpretation-related misjudgments on the part of the observer. With regard to the differences in design, methodology, evaluation sample, and conceptualization of the phenomenon of pain, it is difficult to compare the quality criteria of the various tools. Even if trained personnel could theoretically record pain intensity several times a day using observation instruments, it would not be possible to measure it every minute or second. In this respect, the goal of automated pain recognition is to use valid, robust pain response patterns that can be recorded multimodally for a temporally dynamic, high-resolution, automated pain intensity recognition system. == Procedure == For automated pain recognition, pain-relevant parameters are usually recorded using non-invasive sensor technology, which captures data on the (physical) responses of the person in pain. This can be achieved with camera technology that captures facial expressions, gestures, or posture, while audio sensors record paralinguistic features. (Psycho-)physiological information such as muscle tone and heart rate can be collected via biopotential sensors (electrodes). Pain recognition requires the extraction of meaningful characteristics or patterns from the data collected. This is achieved using machine learning techniques that are able to provide an assessment of the pain after training (learning), e.g., "no pain," "mild pain," or "severe pain." == Parameters == Although the phenomenon of pain comprises different components (sensory discriminative, affective (emotional), cognitive, vegetative, and (psycho-)motor), automated pain recognition currently relies on the measurable parameters of pain responses. These can be divided roughly into the two main categories of "physiological responses" and "behavioral responses". === Physiological responses === In humans, pain almost always initiates autonomic nervous processes that are reflected measurably in various physiological signals. ==== Physiological signals ==== Measurements can include electrodermal activity (EDA, also skin conductance), electromyography (EMG), electrocardiogram (ECG), blood volume pulse (BVP), electroencephalogram (EEG), respiration, and body temperature, which are regulatory mechanisms of the sympathetic and parasympathetic systems. Physiological signals are mainly recorded using special non-invasive surface electrodes (for EDA, EMG, ECG, and EEG), a blood volume pulse sensor (BVP), a respiratory belt (respiration), and a thermal sensor (body temperature). Endocrinological and immunological parameters can also be recorded, but this requires measures that are somewhat invasive (e.g., blood sampling). === Behavioral responses === Behavioral responses to pain fulfil two functions: protection of the body (e.g., through protective reflexes) and external communication of the pain (e.g., as a cry for help). The responses are particularly evident in facial expressions, gestures, and paralinguistic features. ==== Facial expressions ==== Behavioral signals captured comprise facial expression patterns (expressive behavior), which are measured with the aid of video signals. Facial expression recognition is based on the everyday clinical observation that pain often manifests itself in the patient's facial expressions but that this is not necessarily always the case, since facial expressions can be inhibited through self-control. Despite the possibility that facial expressions may be influenced consciously, facial expression behavior represents an essential source of information for pain diagnosis and is thus also a source of information for automatic pain recognition. One advantage of video-based facial expression recognition is the contact-free measurement of the face, provided that it can be captured on video, which is not possible in every position (e.g., lying face down) or may be limited by bandages covering the face. Facial expression analysis relies on rapid, spontaneous, and temporary changes in neuromuscular activity that lead to visually detectable changes in the face. ==== Gestures ==== Gestures are also captured predominantly using non-contact camera technology. Motor pain responses vary and are strongly dependent on the type and cause of the pain. They range from abrupt protective reflexes (e.g., spontaneous retraction of extremities or doubling up) to agitation (pathological restlessness) and avoidance behavior (hesitant, cautious movements). ==== Paralinguistic features of language ==== Among other things, pain leads to nonverbal linguistic behavior that manifests itself in sounds such as sighing, gasping, moaning, whining, etc. Paralinguistic features are usually recorded using highly sensitive microphones. == Algorithms == After the recording, pre-processing (e.g., filtering), and extraction of relevant features, an optional information fusion can be performed. During this process, modalities from different signal sources are merged to generate new or more precise knowledge. The pain is classified using machine learning processes. The method chosen has a significant influence on the recognition rate and depends greatly on the quality and granularity of the underlying data. Similar to the field of affective computing, the following classifiers are currently being used: Support Vector Machine (SVM): The goal of an SVM is to find a clearly defined optimal hyperplane with the greatest minimal distance to two (or more) classes to be separated. The hyperplane acts as a decision function for classifying an unknown pattern. Random Forest (RF): RF is based on the composition of random, uncorrelated decision trees. An unknown pattern is judged individually by each tree and assigned to a class. The final classification of the patterns by the RF is then based on a majority decision. k-Nearest Neighbors (k-NN): The k-NN algorithm classifies an unknown object using the class label that most commonly classifies the k neighbors closest to it. Its neighbors are determined using a selected similarity measure (e.g., Euclidean distance, Jaccard coefficient, etc.). Artificial neural networks (ANNs): ANNs are inspired by biological neural networks and model their organizational principles and processes in a very simplified manner. Class patterns are learned by adjusting the weights of the individual neuronal connections. == Databases == In order to classify pain in a valid manner, it is necessary to create representative, reliable, and valid pain databases that are available to the machine learner for training. An ideal database would be sufficiently large and would consist of natural (not experimental), high-quality pain responses. However, natural responses are difficult to record and can only be obtained to a limited extent; in most cases they are characterized by suboptimal quality. The databases currently available therefore contain experimental or quasi-experimental pain responses, and each database is based on a different pain model. The following list shows a selection of the most relevant pain databases (last updated: April 2020): UNBC-McMaster Shoulder Pain BioVid Heat Pain EmoPain SenseEmotion X-ITE Pain

  Read more →