AI Code For You

AI Code For You — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Film-out

Film-out is the process in the computer graphics, video production and filmmaking disciplines of transferring images or animation from videotape or digital files to a traditional film print. Film-out is a broad term that encompasses the conversion of frame rates, color correction, as well as the actual printing, also called scannior recording. The film-out process is different depending on the regional standard of the master videotape in question – NTSC, PAL, or SECAM – or likewise on the several emerging region-independent formats of high definition video (HD video); thus each type is covered separately, taking into account regional film-out industries, methods and technical considerations. == Live action video == Many modern documentaries and low-budget films are shot on videotape or other digital video media, instead of film stock, and completed as digital video. Video production means substantially lower costs than 16 mm or 35 mm film production on all levels. Until recently, the relatively low cost of video ended when the issue of a theatrical presentation was raised, which required a print for film projection. With the growing presence of digital projection, this is becoming less of a factor. === Standard definition (SD) video === Film-out of standard-definition video – or any source that has an incompatible frame rate – is the up-conversion of video media to film for theatrical viewing. The video-to-film conversion process consists of two major steps: first, the conversion of video into digital film frames which are then stored on a computer or on HD videotape; and secondly, the printing of these digital film frames onto actual film. To understand these two steps, it is important to understand how video and film differ. Film (sound film, at least) has remained unchanged for almost a century and creates the illusion of moving images through the rapid projection of still images, frames, upon a screen, typically 24 per second. Traditional interlaced SD video has no real frame rate, (though the term frame is applied to video, it has a different meaning). Instead, video consists of a very fast succession of horizontal lines that continually cascade down the television screen – streaming top to bottom, before jumping back to the top and then streaming down to the bottom again, repeatedly, almost 60 alternating screen-fulls every second for NTSC, or exactly 50 such screen-fulls per second for PAL and SECAM. Since visual movement in video is infused in this continuous cascade of scan lines, there is no discrete image or real frame that can be identified at any one time. Therefore, when transferring video to film, it is necessary to invent individual film frames, 24 for every second of elapsed time. The bulk of the work done by a film-out company is this first step, creating film frames out of the stream of interlaced video. Each company employs its own (often proprietary) technology for turning interlaced video into high-resolution digital video files of 24 discrete images every second, called 24 progressive video or 24p. The technology must filter out all the visually unappealing artifacting that results from the inherent mismatch between video and film movement. Moreover, the conversion process usually requires human intervention at every edit point of a video program, so that each type of scene can be calibrated for maximum visual quality. The use of archival footage in video especially calls for extra attention. Step two, the scanning to film, is the rote part of the process. This is the mechanical step where lasers print each of the newly created frames of the 24p video, stored on computer files or HD videotape, onto rolls of film. Most companies that do film-out, do all the stages of the process themselves for a lump sum. The job includes converting interlaced video into 24p and often a color correction session – (calibrating the image for theatrical projection), before scanning to physical film, (possibly followed by color correction of the film print made from the digital intermediary) – is offered. At the very least, film-out can be understood as the process of converting interlaced video to 24p and then scanning it to film. ==== NTSC video ==== NTSC is the most challenging of the formats when it comes to standards conversion and, specifically, converting to film prints. NTSC runs at the approximate rate of 29.97 video frames (consisting of two interlaced screen-fulls of scan lines, called fields, per frame) per second. In this way, NTSC resolves actual live action movement at almost – but not quite – 60 alternating half-resolution images every second. Because of this 29.97 rate, no direct correlation to film frames at 24 frames per second can be achieved. NTSC is hardest to reconcile with film, thus motivating its own unique processes. ==== PAL and SECAM video ==== PAL and SECAM run at 25 interlaced video frames per second, which can be slowed down or frame-dropped, then deinterlaced, to correlate frame for frame with film running at 24 actual frames per second. PAL and SECAM are less complex and demanding than NTSC for film-out. PAL and SECAM conversions do agitate, though, with the unpleasant choice between slowing down video (and audio pitch, noticeably) by four percent, from 25 to 24 frames per second, in order to maintain a 1:1 frame match, slightly changing the rhythm and feel of the program; or maintaining original speed by periodically dropping frames, thereby creating jerkiness and possible loss of vital detail in fast-moving action or precise edits. === High definition (HD) digital video === High definition digital video can be shot at a variety of frame rates, including 29.97 interlaced (like NTSC) or progressive; or 25 interlaced (like PAL) or progressive; or even 24-progressive (just like film). HD, if shot in 24-progressive, scans nearly perfectly to film without the need for a frame or field conversion process. Other issues remain though, based on the different resolutions, color spaces, and compression schemes that exist in the high-definition video world. == Computer graphics and animation == Artists working with CGI-Computer-generated imagery animation computers create pictures frame by frame. Once the finished product is done, the frames are outputted, normally in a DPX file. These picture data files can then be put on to film using a film recorder for film out. SGI computers started the high-end CGI-Computer-generated imagery animation systems, but with faster computers and the growth of Linux-based systems, many others are on the market now. Movies fully rendered and animated in CGI such as Toy Story, and Antz utilize the film-out method to produce 35mm copies for archival and release prints. Most CGI work is done in 2K Display resolution files (about the size of QXGA) and then output to the Film-out device for creation of 35 mm elements. With 4K Display resolution digital intermediates on the rise, newer types of film-out recorders are being developed to accept 4k resolution files. A 2K movie requires a Storage Area Network storage several terabytes in size to be properly stored and played out. Computer graphics files are handled the same way but in single frames and may use DPX, TIFF or other file formats. == Digital intermediates == Film-out-recording is the last step of digital intermediate workflow. DPX files that were scanned on a motion picture film scanner are stored on a storage area network (often abbreviated as SAN). The scanned DPX footage is edited and composited-FX on workstations, then mastered back on film. Film restoration is also done this way. A "film intermediate" is an analog variation of a digital intermediate, where a project shot on digital video is printed onto film stock and transferred back to digital video to emulate film. The term was coined after it was used on the Oscar-winning 2012 short film "Curfew". The process was also used on the films Dune (2021) and The Batman (2022). == Images for graphic design and print industries == The days of newspapers and magazines shooting 35mm film are almost gone. Digital cameras can now shoot all the images needed, storing them as files (e.g. JPEG, DPX or another format) that are readily edited prior to use. Once the final copy is approved, it can be filmed out for publishing. Digital stills are not the only way to get pictures used in the graphic design and print industries. Film scanners and computer graphics programs are also common sources for graphic design and print industries. == Types of devices == The following devices are used in film-out processes: CRT recorder. Camera and a special TV display Kinescope – early type Electronic Video Recording or EVR – early type EBR Electron Beam Film Recorder 16 mm by 3M Laser film recorder, like Kodak's high-end Lightning II recorder and Arri's Arrilaser. DLP Film recorder, like Cinevation's real-time Cinevator. == History == Lately it has become possible to transfer video images, inclu
Read more →
SCADA Strangelove

SCADA Strangelove is an independent group of information security researchers founded in 2012, focused on security assessment of industrial control systems (ICS) and SCADA. == Activities == Main fields of research include: Discovery of 0-day vulnerabilities in cyber physical systems and coordinated vulnerability disclosure; Security assessment of ICS protocols and development suites; Identification of publicly Internet-connected ICS components and secure it with help of proper authorities; Development of security hardening guides for ICS software; Mapping cybersecurity on to functional safety; Awareness control and delivery of information regarding the actual security state of ICS systems. SCADA Strangelove's interests expand further than classic ICS components and covers various embedded systems, however, and encompass smart home components, solar panels, wind turbines, SmartGrid as well as other areas. == Projects == Group members have and continue to develop and publish numerous open source tools for scanning, fingerprinting, security evaluation and password bruteforcing for ICS devices. These devices work over industrial protocols such as modbus, Siemens S7, MMS, ISO EC 60870, ProfiNet. In 2014 Shodan used some of the published tools for building a map of ICS devices which is publicly available on the Internet. Open source security assessment frameworks, such as THC Hydra, Metasploit, and DigitalBond Redpoint have used Shodan-developed tools and techniques. The group has published security-hardening guidelines for industrial solutions based on Siemens SIMATIC WinCC and WinCC Flexible. The guidelines contain detailed security configuration walk-throughs, descriptions of internal security features and appropriate best practices. Among the group’s more noticeable projects is Choo Choo PWN (CCP) also named the Critical Infrastructure Attack (CIA). This is an interactive laboratory built upon ICS software and hardware used in real world. Every system is connected to a toy city infrastructure, which includes factories, railroads and other facilities. The laboratory has been demonstrated at various conferences including PHDays, Power of Community, and 30C3. Primarily the laboratory is used for the discovery of new vulnerabilities and for evaluation of security mechanisms, however it is also used for workshops and other educational activities. At Positive Hack Days IV, contestants found several 0-day vulnerabilities in Indusoft Web Studio 7.1 by Schneider Electric, and in specific ICS hardware RTU PET-7000 during the ICS vulnerability discovery challenge. The group supports Secure Open SmartGrid (SCADASOS) project to find and fix vulnerabilities in intellectual power grid components such as photovoltaic power station, wind turbine, power inverter. More than 80 000 industrial devices were discovered and isolated from the Internet in 2015. == Appearances == Group members are frequently seen presenting at conferences like CCC, SCADA Security Scientific Symposium, Positive Hack Days. Most notable talks are: === 29C3 === An overview of vulnerabilities discovered in the widely distributed Siemens SIMATIC WinCC software and tools that are implemented for searching ICS on the Internet. === PHDays === This talk consisted of an overview of vulnerabilities discovered in various systems produced by ABB, Emerson, Honeywell and Siemens and was presented at PHDays III and PHDays IV. === Confidence 2014 === Implications of security research aimed at realization of various industrial network protocols Profinet, Modbus, DNP3, IEC 61850-8-1 (MMS), IEC (International Electrotechnical Commission) 61870-5-101/104, FTE (Fault Tolerant Ethernet), Siemens S7. === PacSec 2014 === Presentations of security research showing the impact of radio and 3G/4G networks on the security of mobile devices as well as on industrial equipment. === 31C3 === Analysis of security architecture and implementation of the most wide spread platforms for wind and solar energy generation which produce many gigawatts of it. === 32C3 === Cybersecurity assessment of railway signaling systems such as Automatic Train Control (ATC), Computer-based interlocking (CBI) and European Train Control System (ETCS). === China Internet Security Conference 2016 === In "Greater China Cyber Threat Landscape" keynote by Sergey Gordeychik an overview of vulnerabilities, attacks and cyber-security incidents in Greater China region was presented. === Recon 2017 === In talk "Hopeless: Relay Protection for Substation Automation" by Kirill Nesterov and Alexander Tlyapov security analysis results of key Digital Substation component - Relay Protection Terminals was presented. Vulnerabilities, including remote code execution in Siemens SIPROTEC, General Electric Line Distance Relay, NARI and ABB protective relays was presented. == Philosophy == All names, catchwords and graphical elements refer to Stanley Kubrick’s film, Dr. Strangelove. In their talks, group members often refer to Cold War events such as the Caribbean Crisis, and draw parallels between nuclear arms race and the current escalation of cyberwar. Group members follow the approach of “responsible disclosure” and “ready to wait for years, while vendor is patching the vulnerability”. Public exploits for discovered vulnerabilities are not published. This is on account of the longevity of ICS and by implication the long process of patching ICS. However, conflicts still happen, notably in 2012 when the talk at DEF CON was called off due to a dispute of persistent weaknesses in Siemens industrial software.
Read more →
Database

In computing, a database is an organized collection of data or a type of data store based on the use of a database management system (DBMS), the software that interacts with end users, applications, and the database itself to capture and analyze the data. The DBMS additionally encompasses the core facilities provided to administer the database. The sum total of the database, the DBMS and the associated applications can be referred to as a database system. Often the term "database" is also used loosely to refer to any of the DBMS, the database system or an application associated with the database. Before digital storage and retrieval of data became widespread, index cards were used for data storage in a wide range of applications and environments: in the home to record and store recipes, shopping lists, contact information and other organizational data; in business to record presentation notes, project research and notes, and contact information; in schools as flash cards or other visual aids; and in academic research to hold data such as bibliographical citations or notes in a card file. Professional book indexers used index cards in the creation of book indexes until they were replaced by indexing software in the 1980s and 1990s. Small databases can be stored on a file system, while large databases are hosted on computer clusters or cloud storage. The design of databases spans formal techniques and practical considerations, including data modeling, efficient data representation and storage, query languages, security and privacy of sensitive data, and distributed computing issues, including supporting concurrent access and fault tolerance. Computer scientists may classify database management systems according to the database models that they support. Relational databases became dominant in the 1980s. These model data as rows and columns in a series of tables, and the vast majority use SQL for writing and querying data. In the 2000s, non-relational databases became popular, collectively referred to as NoSQL, because they use different query languages. == Terminology and overview == Formally, a "database" refers to a set of related data accessed through the use of a "database management system" (DBMS), which is an integrated set of computer software that allows users to interact with one or more databases and provides access to all of the data contained in the database (although restrictions may exist that limit access to particular data). The DBMS provides various functions that allow entry, storage and retrieval of large quantities of information and provides ways to manage how that information is organized. Because of the close relationship between them, the term "database" is often used casually to refer to both a database and the DBMS used to manipulate it. Outside the world of professional information technology, the term database is often used to refer to any collection of related data (such as a spreadsheet or a card index) as size and usage requirements typically necessitate use of a database management system. Existing DBMSs provide various functions that allow management of a database and its data which can be classified into four main functional groups: Data definition – Creation, modification and removal of definitions that detail how the data is to be organized. Update – Insertion, modification, and deletion of the data itself. Retrieval – Selecting data according to specified criteria (e.g., a query, a position in a hierarchy, or a position in relation to other data) and providing that data either directly to the user, or making it available for further processing by the database itself or by other applications. The retrieved data may be made available in a more or less direct form without modification, as it is stored in the database, or in a new form obtained by altering it or combining it with existing data from the database. Administration – Registering and monitoring users, enforcing data security, monitoring performance, maintaining data integrity, dealing with concurrency control, and recovering information that has been corrupted by some event such as an unexpected system failure. Both a database and its DBMS conform to the principles of a particular database model. "Database system" refers collectively to the database model, database management system, and database. Physically, database servers are dedicated computers that hold the actual databases and run only the DBMS and related software. Database servers are usually multiprocessor computers, with generous memory and RAID disk arrays used for stable storage. Hardware database accelerators, connected to one or more servers via a high-speed channel, are also used in large-volume transaction processing environments. DBMSs are found at the heart of most database applications. DBMSs may be built around a custom multitasking kernel with built-in networking support, but modern DBMSs typically rely on a standard operating system to provide these functions. Since DBMSs comprise a significant market, computer and storage vendors often take into account DBMS requirements in their own development plans. Databases and DBMSs can be categorized according to the database model(s) that they support (such as relational or XML), the type(s) of computer they run on (from a server cluster to a mobile phone), the query language(s) used to access the database (such as SQL or XQuery), and their internal engineering, which affects performance, scalability, resilience, and security. == History == The sizes, capabilities, and performance of databases and their respective DBMSs have grown in orders of magnitude. These performance increases were enabled by the technology progress in the areas of processors, computer memory, computer storage, and computer networks. The concept of a database was made possible by the emergence of direct access storage media such as magnetic disks, which became widely available in the mid-1960s; earlier systems relied on sequential storage of data on magnetic tape. The subsequent development of database technology can be divided into three eras based on data model or structure: navigational, SQL/relational, and post-relational. The two main early navigational data models were the hierarchical model and the CODASYL model (network model). These were characterized by the use of pointers (often physical disk addresses) to follow relationships from one record to another. The relational model, first proposed in 1970 by Edgar F. Codd, departed from this tradition by insisting that applications should search for data by content, rather than by following links. The relational model employs sets of ledger-style tables, each used for a different type of entity. Only in the mid-1980s did computing hardware become powerful enough to allow the wide deployment of relational systems (DBMSs plus applications). By the early 1990s, however, relational systems dominated in all large-scale data processing applications, and as of 2018 they remain dominant: IBM Db2, Oracle, MySQL, and Microsoft SQL Server are the most searched DBMS. The dominant database language, standardized SQL for the relational model, has influenced database languages for other data models. Object databases were developed in the 1980s to overcome the inconvenience of object–relational impedance mismatch, which led to the coining of the term "post-relational" and also the development of hybrid object–relational databases. The next generation of post-relational databases in the late 2000s became known as NoSQL databases, introducing fast key–value stores and document-oriented databases. A competing "next generation" known as NewSQL databases attempted new implementations that retained the relational/SQL model while aiming to match the high performance of NoSQL compared to commercially available relational DBMSs. === 1960s, navigational DBMS === The introduction of the term database coincided with the availability of direct-access storage (disks and drums) from the mid-1960s onwards. The term represented a contrast with the tape-based systems of the past, allowing shared interactive use rather than daily batch processing. The Oxford English Dictionary cites a 1962 report by the System Development Corporation of California as the first to use the term "data-base" in a specific technical sense. As computers grew in speed and capability, a number of general-purpose database systems emerged; by the mid-1960s a number of such systems had come into commercial use. Interest in a standard began to grow, and Charles Bachman, author of one such product, the Integrated Data Store (IDS), founded the Database Task Group within CODASYL, the group responsible for the creation and standardization of COBOL. In 1971, the Database Task Group delivered their standard, which generally became known as the CODASYL approach, and soon a number of commercial products based on this approach entered the market. The CODASYL approach of
Read more →
Overcast (app)

Overcast is a podcast app for iOS that was launched in 2014 by founder and operator Marco Arment. == Founder and operator == Arment was also the Chief Technology Officer of Tumblr and founder of Instapaper before founding Overcast, and he had created his own podcasts before launching the app. In March 2023, Arment told The Vergecast how he built and maintains Overcast by himself, and that he uses ad banners promoting podcasts to cover the costs of the free app. == Features and reception == In 2014, Overcast received positive reviews from MacWorld and iMore. In 2015, The Verge and The Sweet Setup each named it the best podcast app for iOS that year. In 2017, Discover Pods gave an endorsement citing the "smart speed" feature, which shortens quiet gaps in a podcast. In April 2019, Overcast introduced a feature that allowed users to share clips from podcasts to social media. In January 2020, Overcast was updated to allow users to skip the intros and outros of podcasts.
Read more →
Toad (software)

Toad is a database management toolset from Quest Software for managing relational and non-relational databases using SQL aimed at database developers, database administrators, and data analysts. The Toad toolset runs against Oracle, SQL Server, IBM DB2 (LUW & z/OS), SAP and MySQL. A Toad product for data preparation supports many data platforms. == History == A practicing Oracle DBA, Jim McDaniel, designed Toad for his own use in the mid-1990s. He called it Tool for Oracle Application Developers, shortened to "TOAD". McDaniel initially distributed the tool as shareware and later online as freeware. Quest Software acquired TOAD in October 1998. Quest Software itself was acquired by Dell in 2012 to form Dell Software. In June 2016, Dell announced the sale of their software division, including the Quest business, to Francisco Partners and Elliott Management Corporation. On October 31, 2016, the sale was finalized. On November 1, 2016, the sale of Dell Software to Francisco Partners and Elliott Management was completed, and the company re-launched as Quest Software. == Features == Connection Manager - Allow users to connect natively to the vendor’s database whether on-premise or DBaaS. Browser - Allow users to browse all the different database/schema objects and their properties effective management. Editor - A way to create and maintain scripts and database code with debugging and integration with source control. Unit Testing (Oracle) - Ensures code is functionally tested before it is released into production. Static code review (Oracle) - Ensures code meets required quality level using a rules-based system. SQL Optimization - Provides developers with a way to tune and optimize SQL statements and database code without relying on a DBA. Advanced optimization enables DBAs to tune SQL effectively in production. Scalability testing and database workload replay - Ensures that database code and SQL will scale properly before it gets released into production. == Books == Toad Pocket Reference for Oracle plsql 1st Edition by Jim McDaniel and Patrick McGrath, O'Reilly, 2002 (ISBN 0596003374, ISBN 978-0-596-00337-1) Toad Pocket Reference for Oracle 2nd Edition by Jeff Smith, Bert Scalzo, and Patrick McGrath, O'Reilly, 2005 (ISBN 0596009712, ISBN 978-0-596-00971-7) TOAD Handbook by Bert Scalzo and Dan Hotka, Sams, 2003 (ISBN 0672324865, ISBN 978-0-672-32486-4) TOAD Handbook 2nd Edition by Bert Scalzo and Dan Hotka, Addison-Wesley Professional, 2009 (ISBN 0321649109, ISBN 978-0-321-64910-2). TOAD Handbook 2nd Edition by Bert Scalzo and Dan Hotka, Addison-Wesley Professional, 2009 (ISBN 0321649109, ISBN 978-0-321-64910-2).
Read more →
Shape table

Shape tables are a feature of the Apple II ROMs which allows for manipulation of small images encoded as a series of vectors. An image (or shape) can be drawn in the high-resolution graphics mode—with scaling and rotation—via software routines in the ROM. Shape tables are supported via Applesoft BASIC and from machine code in the "Programmer's Aid" package that was bundled with the original Integer BASIC ROMs for that computer. Applesoft's high-resolution graphics routines were not optimized for speed, so shape tables were not typically used for performance-critical software such as games, which were typically written in assembly language and used pre-shifted bitmap shapes. Shape tables were used primarily for static shapes and sometimes for fancy text; Beagle Bros offered a number of fonts in Font Mechanic as Applesoft shape tables. == Technical details == The vectors of a two-dimensional graphic, each encoding a direction from the previous pixel along with a flag indicating whether the new pixel should be illuminated or not, were encoded up to three in a byte. These were stored in a table via the Monitor or the POKE command. From there, the graphic could be referenced by number (a table could contain up to 255 shapes), and built-in Applesoft routines permitted scaling, rotating, and drawing or erasing the shape. An XOR mode was also available to allow the shape to be visible on any color background; this had the advantage, also, of allowing the shape to be easily erased by redrawing it. Apple did not provide any utilities for creating shape tables; they had to be created by hand, usually by plotting on graph paper, then calculating the hexadecimal values and entering them into the computer. Beagle Bros created a shape table editing program, which eliminated the "number crunching", called Apple Mechanic, and a related program, Font Mechanic.
Read more →
Common Image Generator Interface

The Common Image Generator Interface (CIGI) (pronounced sig-ee), is an on-the-wire data protocol that allows communication between an Image Generator and its host simulation. The interface is designed to promote a standard way for a host device to communicate with an image generator (IG) within the industry. CIGI enables plug-and-play by standard-compliant image generator vendors and reduces integration costs when upgrading visual systems. == Background == Most high-end simulators do not have everything running on a single machine the way popular home software flight simulators are currently implemented. The airplane model is run on one machine, normally referred to as the host, and the out the window visuals or scene graph program is run on another, usually referred to as an Image Generator (IG). Frequently there are multiple IGs required to display the surrounding environment created by a host. CIGI is the interface between the 'host' and the IGs. The main goal of CIGI is to capitalize on previous investments through the use of a common interface. CIGI is designed to assist suppliers and integrators of IG systems with ease of integration, code reuse, and overall cost reduction. In the past most image generators provided their own proprietary interface; every host had to implement that interface making changing image generators a costly ordeal. CIGI was created to standardize the interface between the host and the image generator so that little modification would be needed to switch image generators. The CIGI initiative was largely spearheaded by The Boeing Company during the early 21st century. The latest version of CIGI (CIGI 4.0) was developed by the Simulation Interoperability Standards Organization (SISO) in the form of SISO-STD-013-2014, Standard for Common Image Generator Interface (CIGI), Version 4.0, dated 22 August 2014. SISO-STD-013-2014 is freely available from SISO. == Definitions == Image generator – In this context an image generator consists of one or more rendering channels that produce an image that can be used to visualize an “Out-The-Window” scene, or images produced by various sensor simulations such as Infra-red, Day TV, electro-optical, and night vision. Host simulation – In this context a “Host” is the computational system that provides information about the device being simulated so that the image generator can portray the correct scenery to the user. This information is passed via CIGI to the image generator. == Maturation == CIGI 4 is the latest version of the standard as was approved by the Simulation Interoperability Standards Organization on August 22, 2014. CIGI became an international SISO standard known as SISO-STD-013-2014; which contains the CIGI version 4.0 Interface Control Document (ICD). CIGI 4.0 is the official standard, published by SISO. Previous versions of CIGI were spearheaded by Boeing include CIGI v3.3, in November 2008, v3.2 April 2006, v3.1 June 2004, v3 November 2003, v2 in March 2002, and the original (v1) in March 2001 == Protocol dependencies == Typically, CIGI uses UDP as its transport protocol, but CIGI does not require a specific transport mechanism, only packet definition conformance. CIGI traffic does not have a well known port; however, the use of ports 8004-8005 has been widely adopted by commercial image generator vendors implementations. == Development tools == === Host Emulator === The Host Emulator can be used as a surrogate to manipulate the interface when a simulation Host is not available. It is a Windows-based image generator Host application used to develop, integrate and test image generators that use the CIGI protocol. It provides a graphical user interface (GUI) for the creation, modification and deletion of entities; manipulation of views; control of environmental attributes and phenomena; and other host functions. The Host Emulator has several features that are useful for integration and testing. A free-flight mode allows for fixed-wing and rotorcraft flight, movement along entity axes and free rotation using a joystick or a joystick-like widget. Scripting and record/playback features support regression testing, demonstrations and other tasks needing exact reproduction of certain sequences of events. A packet-level snoop feature allows the user to examine the contents of CIGI messages, image generator response times and latencies. A Heartbeat Monitor Window shows a graphical timing history of the Image Generator's data frame rate. Other features include explicit packet creation, animation control, missile flyouts and a situation display window (Host Emulator 3.x only). === Multi-Purpose Viewer === The Multi-Purpose Viewer (MPV) provides the basic functionality expected of an Image Generator, such as loading and displaying a terrain database, displaying entities and so forth. The Multi-Purpose Viewer can be used as a surrogate to manipulate the interface when a real Image Generator is not available. The MPV is capable of operating with both the Windows and Linux operating systems. === CIGI Class Library === The CCL is an object-oriented software interface that automatically handles message composition and decomposition (i.e. packing, unpacking and byte swapping to the ICD specification) on both the Host and Image Generator sides of the interface. The CCL interprets Host or Image Generator messages based on compile time parameters. It also performs error handling and translation between different versions of CIGI. Each packet type has its own class. The individual packet members are accessed through packet class accessors. Outgoing messages are constructed by placing each packet into the outgoing buffer using a streaming operator. Incoming messages are parsed using callback or event-based mechanisms that supply the using program with fully populated packet objects. === Current tool suite === A set of CIGI development tools are managed and maintained by the SISO CIGI Product Support Group. The latest packages are available on SourceForge. Comments/Suggestions to the package can be directed to the SISO discussion board at: https://discussions.sisostds.org/index.htm?A0=SAC-PSG-CIGI Archived 2017-09-13 at the Wayback Machine === Wireshark === Wireshark is a free and open source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education. Wireshark provides a dissector for CIGI packets. As of October 2016, “The CIGI dissector is fully functional for CIGI version 2 and 3. Version 1 is not yet implemented.” === Older versions of CIGI === A CIGI Interface Control Document (ICD) and development suite is available in open source format. The tools, ICD, and accompanying user documentation can be found and downloaded from the CIGI sourceforge web site. The SourceForge version of the MPV is limited in its support of CIGI data packets and is intended to grow as needs arise. The MPV uses CIGI 3 as its interface, but the MPV is backward-compatible with earlier CIGI versions through the use of the CCL. The MPV uses the Open Scene Graph library to render a scene. The scene graph is manipulated according to the CIGI commands received from the Host via the CCL. The MPV itself is an application layer that consists of a small kernel leveraging heavily on a plug-in architecture for ease of maintainability and flexibility. An implementer can implement the interface from scratch, however a full suite of integration tools is available. These tools consist of three elements. The Host Emulator (HE), the Multi-Purpose Viewer (MPV), and the CIGI Class Library (CCL).
Read more →
North Atlantic Population Project

The North Atlantic Population Project (NAPP) is a collaboration of historical demographers in Britain, Canada, Denmark, Germany, Iceland, Norway, and Sweden to produce a massive census microdata collection for the North Atlantic Region in the late-nineteenth century. The database includes complete individual-level census enumerations for each country, and provides information on over 110 million people. This large scale allows detailed analysis of small geographic areas and population subgroups. The NAPP database is designed to be compatible with the Integrated Public Use Microdata Series (IPUMS), and is disseminated through the IPUMS data-access system at the Minnesota Population Center, University of Minnesota. Major collaborators on the project include Lisa Dillon, University of Montreal; Chad Gaffield, University of Ottawa; Ólöf Garðarsdóttir, Statistics Iceland; Marianne Jarnes Erikstad, University of Tromsø; Jan Oldervall University of Bergen; Evan Roberts, University of Minnesota; Steven Ruggles, University of Minnesota; Kevin Schürer, UK Data Archive; Gunnar Thorvaldsen, University of Tromsø; and Matthew Woollard, UK Data Archive. The project is also coordinated by the Minnesota Population Center at the University of Minnesota.
Read more →
Anna Becker

Anna Becker is an Israeli researcher known in the field of artificial intelligence and computer science within the financial field. == Early life and education == Becker was born in Russia and immigrated to Israel at 16 after graduating from a school in Moscow. At 17, she began her studies at Technion – Israel Institute of Technology. During her master's degree in computer science, she taught first-year students of the same course, and at 27, Becker completed her PhD in Computer Science and Artificial Intelligence. == Career == While pursuing her PhD, Becker resolved an NP-complete approximation algorithm that had been unresolved for over twenty years. This made her a recognized scholar in the field. After completing her PhD, she developed an approximation technique by a factor of two. This technique is widely used today in operating systems, database systems, and VLSI chip designs. She then founded and sold Strategy Runner, a fintech software. After this, she founded EndoTech, an algorithmic trading platform based on artificial intelligence and machine learning. EndoTech's trading strategies have been operating in live cryptocurrency markets since 2017. The platform's BTC Alpha strategy has reported an average annual return of 163% on fixed capital over eight years of live operation, with a maximum drawdown of 14% and a trade accuracy rate of approximately 83%. In 2026, EndoTech entered a partnership with Bit1 Exchange to make its BTC Alpha and ETH Alpha copy trading strategies accessible to retail investors with no minimum deposit requirement, through a full-custody model in which user funds remain in their own exchange wallets at all times.As of 2023, Becker is working on Fianchetto Fund, an AI-based investing analysis platform. Becker has also co-authored a book on Bayesian networks, which has been published widely in the field of computer science and artificial intelligence.
Read more →
Tuber (app)

Tuber (Chinese: Tuber浏览器) was a web browser mobile app developed by Shanghai Fengxuan Information Technology that allowed users within mainland China to view filtered versions of certain websites normally blocked by the Great Firewall. Filtered versions of websites such as Google, Facebook, Instagram, YouTube, Twitter, Netflix, IMDb, and Wikipedia could be viewed. The app was backed by cybersecurity company Qihoo 360 which served as the parent company. The app required phone number registration. Sensitive keywords were blocked by the app. On October 9, 2020, Global Times editor Rita Bai Yunyi tweeted that the move represented "a great step for China's opening up". The app was removed from China domestic app stores and operations ceased as of October 10, 2020. On October 12, when questioned by a Bloomberg News reporter on the topic, Foreign Ministry spokesperson Zhao Lijian replied, "This is not a diplomatic issue, and I do not have the relevant information you mentioned. China has always managed the Internet in accordance with the law. I suggest you ask the competent department for the specific situation."
Read more →
Medical data breach

Medical data, including patients' identity information, health status, disease diagnosis and treatment, and biogenetic information, not only involve patients' privacy but also have a special sensitivity and important value, which may bring physical and mental distress and property loss to patients and even negatively affect social stability and national security once leaked. However, the development and application of medical AI must rely on a large amount of medical data for algorithm training, and the larger and more diverse the amount of data, the more accurate the results of its analysis and prediction will be. However, the application of big data technologies such as data collection, analysis and processing, cloud storage, and information sharing has increased the risk of data leakage. In the United States, the rate of such breaches has increased over time, with 176 million records breached by the end of 2017. By 2024, the U.S. Department of Health and Human Services reported 725 large healthcare data breaches affecting approximately 275 million individual records in a single year, marking a significant escalation in both the frequency and scale of incidents. == Black market for health data == In February 2015 an NPR report claimed that organized crime networks had ways of selling health data in the black market. In 2015 a Beazley employee estimated that medical records could sell on the black market for US$40-50. == How data is lost == Theft, data loss, hacking, and unauthorized account access are ways in which medical data breaches happen. Among reported breaches of medical information in the United States networked information systems accounted for the largest number of records breached. There are many data breaches happening in the US health care system, among business associates of the health care providers that continuously gain access to patients' data. == List of data breaches == In February 2024, a ransomware attack on Change Healthcare, a subsidiary of UnitedHealth Group, compromised the protected health information of approximately 100 million individuals, making it the largest healthcare data breach in United States history. The attack disrupted claims processing for healthcare providers nationwide for several weeks. In May 2024, MediSecure suffered a cyberattack involving ransomware in Australia. In May 2021, the Health Service Executive in the Republic of Ireland was the victim of a cyberattack involving ransomware, in the Health Service Executive cyberattack, with admission records and test results present in a sample of the data reviewed by the Financial Times. In October 2018, the Centers for Medicare and Medicaid Services in the US reported that around 75,000 individual records had been affected by a data breach that took place through the ACA Agent and Broker Portal. In 2018, Social Indicators Research published the scientific evidence of 173,398,820 (over 173 million) individuals affected in USA from October 2008 (when the data were collected) to September 2017 (when the statistical analysis took place). In 2015, Anthem Inc. lost data for 37 million people in the Anthem medical data breach In 2014 4.5 million people using Complete Health Systems had their data stolen In 2013-14 1 million people using Montana Department of Public Health and Human Services had their data stolen In 2013 4 million people using Advocate Health and Hospitals Corporation had their data stolen In 2011 4.9 million users of Tricare services had their data stolen due to an employee error by Science Applications International Corporation In 2011 1.9 million people using Health Net had their data stolen In 2011 1 million people using Nemours Foundation had their data stolen In 2010 6800 people using New York-Presbyterian Hospital and Columbia University Medical Center had their data breached. In response, those organizations agreed to pay the United States Department of Health and Human Services a US$4.8 million dollar fine. In 2009 1 million people using BlueCross BlueShield of Tennessee had their data stolen == Regulation == In the United States, the Health Insurance Portability and Accountability Act and Health Information Technology for Economic and Clinical Health Act require companies to report data breaches to affected individuals and the federal government. Under the HIPAA Breach Notification Rule, covered entities must notify affected individuals without unreasonable delay and no later than 60 days after discovering a breach of unsecured protected health information. Breaches affecting 500 or more individuals must also be reported to the HHS Secretary and to prominent media outlets serving the affected state or jurisdiction within the same timeframe; HHS publicly lists these larger breaches on its breach portal, commonly known as the "wall of shame." Breaches affecting fewer than 500 individuals are reported to HHS annually, no later than 60 days after the end of the calendar year in which they were discovered. Health Information Privacy Health Insurance Portability and Accountability Act of 1996 (HIPAA). - 45 CFR Parts 160 and 164, Standards for Privacy of Individually Identifiable Health Information and Security Standards for the Protection of Electronic Protected Health Information. HIPAA includes provisions designed to save health care businesses money by encouraging electronic transactions, as well as regulations to protect the security and confidentiality of patient information. The Privacy Rule became effective April 14, 2001, and most covered entities (health plans, health care clearinghouses, and health care providers that conduct certain financial and administrative transactions electronically) had until April 2003 to comply. This security provision became effective April 21, 2003. The Health Insurance Portability and Accountability Act (HIPAA) is the baseline set of federal regulations governing medical information. It does three things: i. i. i.Establish a structure for how personal health information is disclosed and establish the rights of individuals with respect to health information; ii.Specify security standards for the retention and transmission of electronic patient information; iii.Need a common format and data structure for the electronic exchange of health information. California-Specific Laws California’s medical privacy laws, primarily the Confidentiality of Medical Information Act (CMIA), the data breach sections of the Civil Code, and sections of the Health and Safety Code, provide HIPAA-like protections, although the terminology is different. HIPAA establishes a federal "minimum standard" that applies where there are gaps in California law, and HIPAA also specifies that stricter state laws will override or supersede HIPAA. California's health care privacy laws apply to providers who provide personal health records (PHR), while HIPAA only applies when the provider providing the PHR is a business associate of a covered entity. Federal law does not grant individuals the right to file a lawsuit in the event of a data breach (only the Attorney General can file a lawsuit), but California law does. This means that California law sets a higher standard for medical privacy, and that individuals in California enjoy stronger legal protections and more ways to hold entities that violate their medical privacy accountable. In the UK, the legal framework for how patient data is cared for and processed is the Data Protection Act 2018 (DPA), which incorporates the EU General Data Protection Regulation (GDPR) into law, and the common law duty of confidentiality (CLDC). The data protection legislation requires that the collection and processing of personal data be fair, lawful and transparent. This means that the collection and processing of data as defined by data protection legislation must always have a valid lawful basis and must also meet the requirements of the CLDC. In the China, Article 18 of the "National Health Care Big Data Standards, Security and Services Management Measures (for Trial Implementation)" (National Health Planning and Development (2018) No. 23) promulgated by the National Health Care Commission in 2018 states, "The responsible unit shall adopt measures such as data classification, important data backup, and encryption authentication to guarantee the security of health care big data." However, the scope and definition of important data are not covered. Although the "Information Security Technology-Healthcare Data Security Guide" (the "Guide") issued by the National Standardization Committee also proposes that important data should be evaluated and approved in accordance with the regulations, there is likewise no definition of the connotation and definition of important data.
Read more →
Starlight Information Visualization System

Starlight is a software product originally developed at Pacific Northwest National Laboratory and now by Future Point Systems. It is an advanced visual analysis environment. In addition to using information visualization to show the importance of individual pieces of data by showing how they relate to one another, it also contains a small suite of tools useful for collaboration and data sharing, as well as data conversion, processing, augmentation and loading. The software, originally developed for the intelligence community, allows users to load data from XML files, databases, RSS feeds, web services, HTML files, Microsoft Word, PowerPoint, Excel, CSV, Adobe PDF, TXT files, etc. and analyze it with a variety of visualizations and tools. The system integrates structured, unstructured, geospatial, and multimedia data, offering comparisons of information at multiple levels of abstraction, simultaneously and in near real-time. In addition Starlight allows users to build their own named entity-extractors using a combination of algorithms, targeted normalization lists and regular expressions in the Starlight Data Engineer (SDE). As an example, Starlight might be used to look for correlations in a database containing records about chemical spills. An analyst could begin by grouping records according to the cause of the spill to reveal general trends. Sorting the data a second time, they could apply different colors based on related details such as the company responsible, age of equipment or geographic location. Maps and photographs could be integrated into the display, making it even easier to recognize connections among multiple variables. Starlight has been deployed to both the Iraq and Afghanistan wars and used on a number of large-scale projects. PNNL began developing Starlight in the mid-1990s, with funding from the Land Information Warfare Agency, a part of the Army Intelligence and Security Command and continued developed at the laboratory with funding from the NSA and the CIA. Starlight integrates visual representations of reports, radio transcripts, radar signals, maps and other information. The software system was recently honored with an R&D 100 Award for technical innovation. In 2006 Future Point Systems, a Silicon Valley startup, acquired rights to jointly develop and distribute the Starlight product in cooperation with the Pacific Northwest National Laboratory. The software is now also used outside of the military/intelligence communities in a number of commercial environments.
Read more →
Magiran

Magiran (Persian: مگیران)—Iran's publications database—is a digital library that was founded in 2000 and includes digitized versions of scientific journals, which currently provides the possibility of searching among the full text of 1,500 journals. Registration is required for full access to the database, but access to some items such as newspapers is also possible without registration. A list of Iranian researchers is also maintained there.
Read more →
Physical information security

Physical information security is the intersection or common ground between physical security and information security. It primarily concerns the protection of tangible information-related assets such as computer systems and storage media against physical, real-world threats such as unauthorized physical access, theft, fire and flood. It typically involves physical controls such as protective barriers and locks, uninterruptible power supplies, and shredders. Information security controls in the physical domain complement those in the logical domain (such as encryption), and procedural or administrative controls (such as information security awareness and compliance with policies and laws). == Background == Asset are inherently valuable and yet vulnerable to a wide variety of threats, both malicious (e.g. theft, arson) and accidental/natural (e.g. lost property, bush fire). If threats materialize and exploit those vulnerabilities causing incidents, there are likely to be adverse impacts on the organizations or individuals who legitimately own and utilize the assets, varying from trivial to devastating in effect. Security controls are intended to reduce the probability or frequency of occurrence and/or the severity of the impacts arising from incidents, thus protecting the value of the assets. Physical security involves the use of controls such as smoke detectors, fire alarms and extinguishers, along with related laws, regulations, policies and procedures concerning their use. Barriers such as fences, walls and doors are obvious physical security controls, designed to deter or prevent unauthorized physical access to a controlled area, such as a home or office. The moats and battlements of Mediaeval castles are classic examples of physical access controls, as are bank vaults and safes. Information security controls protect the value of information assets, particularly the information itself (i.e. the intangible information content, data, intellectual property, knowledge etc.) but also computer and telecommunications equipment, storage media (including papers and digital media), cables and other tangible information-related assets (such as computer power supplies). The corporate mantra "Our people are our greatest assets" is literally true in the sense that so-called knowledge workers qualify as extremely valuable, perhaps irreplaceable information assets. Health and safety measures and even medical practice could therefore also be classed as physical information security controls since they protect humans against injuries, diseases and death. This perspective exemplifies the ubiquity and value of information. Modern human society is heavily reliant on information, and information has importance and value at a deeper, more fundamental level. In principle, the subcellular biochemical mechanisms that maintain the accuracy of DNA replication could even be classed as vital information security controls, given that genes are 'the information of life'. Malicious actors who may benefit from physical access to information assets include computer crackers, corporate spies, and fraudsters. The value of information assets is self-evident in the case of, say, stolen laptops or servers that can be sold-on for cash, but the information content is often far more valuable, for example encryption keys or passwords (used to gain access to further systems and information), trade secrets and other intellectual property (inherently valuable or valuable because of the commercial advantages they confer), and credit card numbers (used to commit identity fraud and further theft). Furthermore, the loss, theft or damage of computer systems, plus power interruptions, mechanical/electronic failures and other physical incidents prevent them being used, typically causing disruption and consequential costs or losses. Unauthorized disclosure of confidential information, and even the coercive threat of such disclosure, can be damaging as we saw in the Sony Pictures Entertainment hack at the end of 2014 and in numerous privacy breach incidents. Even in the absence of evidence that disclosed personal information has actually been exploited, the very fact that it is no longer secured and under the control of its rightful owners is itself a potentially harmful privacy impact. Substantial fines, adverse publicity/reputational damage and other noncompliance penalties and impacts that flow from serious privacy breaches are best avoided, regardless of cause! == Examples of physical attacks to obtain information == There are several ways to obtain information through physical attacks or exploitations. A few examples are described below. === Dumpster diving === Dumpster diving is the practice of searching through trash in the hope of obtaining something valuable such as information carelessly discarded on paper, computer disks or other hardware. === Overt access === Sometimes attackers will simply go into a building and take the information they need. Frequently when using this strategy, an attacker will masquerade as someone who belongs in the situation. They may pose as a copy room employee, remove a document from someone's desk, copy the document, replace the original, and leave with the copied document. Individuals pretending to building maintenance may gain access to otherwise restricted spaces. They might walk right out of the building with a trash bag containing sensitive documents, carrying portable devices or storage media that were left out on desks, or perhaps just having memorized a password on a sticky note stuck to someone's computer screen or called out to a colleague across an open office. == Examples of Physical Information Security Controls == Shredding paper documents prior to their disposal can prevent unintended information leakage. Digital data can be encrypted or securely wiped. Offices may require visitors to present valid identification cards or valid access keys. Office workers may be required to obey "clear desk" policies, protecting documents and other storage media (including portable IT devices) by tidying them away out of sight (for example in locked drawers, filing cabinets, safes or a Bank vault). Workers may be required to memorize their passwords or use a password manager instead of writing passwords on paper. Computers are vulnerable to outages caused by power cuts, accidental disconnection, flat batteries, brown-outs, surges, spikes, electrical interference and electronic failures. Physical information security controls to address the associated risks include: fuses, no-break battery-backed power supplies, electrical generators, redundant power sources and cabling, "Do not remove" warning signs on plugs, surge protectors, power quality monitoring, spare batteries, professional design and installation of power circuits plus regular inspections/tests and preventive maintenance.
Read more →
Stanza Living

Stanza Living is the common brand name for Dtwelve Spaces Private Limited. It provides fully-managed shared living accommodations to students and young professionals. Founded by Anindya Dutta and Sandeep Dalmia, the company is present across 23 cities including Delhi, NCR, Bangalore, Visakhapatnam, Hyderabad, Chennai, Coimbatore, Indore, Pune, Baroda, Vijayawada, and Dehradun, Kota in India, with a capacity of 70,000 beds. Stanza Living is a technology-enabled housing concept which provides fully-furnished residences with amenities like meals, internet, laundry services, housekeeping, security and community engagement programmes. The company has an asset-light business model under which it engages in long-term lease agreements with property owners/developers, who convert their assets into shared living residences as per company guidelines. These assets are subsequently operated by Stanza Living. == Industry background == A report by Cushman & Wakefield (C&W) titled 'Exploring the Student Housing Universe in India City Insights', estimates that there were over 9.08 million migrant student enrolments in India's higher educational institutions (HEIs) for the year 2018-19 who need quality accommodation facilities. According to the report, Delhi-NCR, Mumbai, and Pune are the three biggest markets for student housing in the country, and these cities require an additional 4.75 lakh beds from organized co-living operators to meet the current demand. == History == Stanza Living provides tech-enabled, fully managed community living facilities for students and working professionals. The company was launched as a student housing business in Delhi NCR with a capacity of 100 beds, and grew to 14 cities by 2019. By early 2020, the company began catering to working professionals as well. The company has a combined inventory of 70,000 beds under management for both students and working professionals. Stanza Living is currently valued at $300 million. It has raised a capital of about $70 million from leading global investors like Falcon Edge Capital, Sequoia Capital, Matrix Partners and Accel Partners. November 2017 – Seed funding, September 2018 – Series A, March 2019 – Debt financing, July 2019 – Series C round, December 2019 - Debt financing. The company has invested in building technology products for business efficiency and consumer experience, like the Stanza Resident App and Stanza Real Estate App. Stanza Living has close to 1,500 employees across India. It is recognized among Top Real Estate Tech Startups of 2020 across the globe by research and analysis company Tracxn. The company has been shortlisted among Top 25 Start-ups of India in 2019 by LinkedIn == Founders == Stanza Living was co-founded by Anindya Dutta and Sandeep Dalmia. Sandeep Dalmia is an alumnus of Delhi College of Engineering and IIM Ahmedabad. Prior to Stanza, he was a Principal at Boston Consulting Group, working across India, US and South East Asia markets. Anindya Dutta was previously a Real Estate investor with Oaktree Capital and prior to that, he worked at Goldman Sachs in London. He is an alumnus of IIT Kharagpur and IIM Ahmedabad.
Read more →