AI Code For You

AI Code For You — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Research software engineering

    Research software engineering

    Research software engineering is the application of software engineering practices, methods and techniques for research software, i.e. software that was made for and is mainly used within research projects. As usual for software engineering, this also includes knowledge of other (and in this case varying) research fields as well as open science that need to be incorporated into a software development process. The term was proposed in a research paper in 2010 in response to an empirical survey on tools used for software development in research projects. It started to be used in United Kingdom in 2012, when it was needed to define the type of software development needed in research. This focuses on reproducibility, reusability, and accuracy of data analysis and applications created for research. == Support == Various type of associations and organisations have been created around this role to support the creation of posts in universities and research institutes. In 2014 a Research Software Engineer Association was created in UK, which attracted 160 members in the first three months and which lead to the creation of the Society of Research Software Engineering in 2019. Other countries like the Netherlands, Germany, and the USA followed creating similar communities and there are similar efforts being pursued in Asia, Australia, Canada, New Zealand, the Nordic countries, and Belgium. In January 2021 the International Council of RSE Associations was introduced. UK counts over 40 universities and institutes with groups that provide access to software expertise to different areas of research. Additionally, the Engineering and Physical Sciences Research Council created a Research Software Engineer fellowship to promote this role and help the creation of RSE groups across UK, with calls in 2015, 2017, and 2020. The world first RSE conference took place in UK in September 2016 and it has been repeated annually (except for a gap in 2020) since. In 2019 the first national RSE conferences in Germany and the Netherlands were held, next editions were planned for 2020 and then cancelled. US-RSE held its first national conference in 2023. The Research Software Alliance was formed in 2019 to advance the global research software ecosystem by collaborating with decision makers and key influencers. The SORSE (A Series of Online Research Software Events) community was established in late‑2020 in response to the COVID-19 pandemic and ran its first online event in September 2020.

    Read more →
  • Variational message passing

    Variational message passing

    Variational message passing (VMP) is an approximate inference technique for continuous- or discrete-valued Bayesian networks, with conjugate-exponential parents, developed by John Winn. VMP was developed as a means of generalizing the approximate variational methods used by such techniques as latent Dirichlet allocation, and works by updating an approximate distribution at each node through messages in the node's Markov blanket. == Likelihood lower bound == Given some set of hidden variables H {\displaystyle H} and observed variables V {\displaystyle V} , the goal of approximate inference is to maximize a lower-bound on the probability that a graphical model is in the configuration V {\displaystyle V} . Over some probability distribution Q {\displaystyle Q} (to be defined later), ln ⁡ P ( V ) = ∑ H Q ( H ) ln ⁡ P ( H , V ) P ( H | V ) = ∑ H Q ( H ) [ ln ⁡ P ( H , V ) Q ( H ) − ln ⁡ P ( H | V ) Q ( H ) ] {\displaystyle \ln P(V)=\sum _{H}Q(H)\ln {\frac {P(H,V)}{P(H|V)}}=\sum _{H}Q(H){\Bigg [}\ln {\frac {P(H,V)}{Q(H)}}-\ln {\frac {P(H|V)}{Q(H)}}{\Bigg ]}} . So, if we define our lower bound to be L ( Q ) = ∑ H Q ( H ) ln ⁡ P ( H , V ) Q ( H ) {\displaystyle L(Q)=\sum _{H}Q(H)\ln {\frac {P(H,V)}{Q(H)}}} , then the likelihood is simply this bound plus the relative entropy between P {\displaystyle P} and Q {\displaystyle Q} . Because the relative entropy is non-negative, the function L {\displaystyle L} defined above is indeed a lower bound of the log likelihood of our observation V {\displaystyle V} . The distribution Q {\displaystyle Q} will have a simpler character than that of P {\displaystyle P} because marginalizing over P {\displaystyle P} is intractable for all but the simplest of graphical models. In particular, VMP uses a factorized distribution Q ( H ) = ∏ i Q i ( H i ) , {\displaystyle Q(H)=\prod _{i}Q_{i}(H_{i}),} where H i {\displaystyle H_{i}} is a disjoint part of the graphical model. == Determining the update rule == The likelihood estimate needs to be as large as possible; because it's a lower bound, getting closer log ⁡ P {\displaystyle \log P} improves the approximation of the log likelihood. By substituting in the factorized version of Q {\displaystyle Q} , L ( Q ) {\displaystyle L(Q)} , parameterized over the hidden nodes H i {\displaystyle H_{i}} as above, is simply the negative relative entropy between Q j {\displaystyle Q_{j}} and Q j ∗ {\displaystyle Q_{j}^{}} plus other terms independent of Q j {\displaystyle Q_{j}} if Q j ∗ {\displaystyle Q_{j}^{}} is defined as Q j ∗ ( H j ) = 1 Z e E − j { ln ⁡ P ( H , V ) } {\displaystyle Q_{j}^{}(H_{j})={\frac {1}{Z}}e^{\mathbb {E} _{-j}\{\ln P(H,V)\}}} , where E − j { ln ⁡ P ( H , V ) } {\displaystyle \mathbb {E} _{-j}\{\ln P(H,V)\}} is the expectation over all distributions Q i {\displaystyle Q_{i}} except Q j {\displaystyle Q_{j}} . Thus, if we set Q j {\displaystyle Q_{j}} to be Q j ∗ {\displaystyle Q_{j}^{}} , the bound L {\displaystyle L} is maximized. == Messages in variational message passing == Parents send their children the expectation of their sufficient statistic while children send their parents their natural parameter, which also requires messages to be sent from the co-parents of the node. == Relationship to exponential families == Because all nodes in VMP come from exponential families and all parents of nodes are conjugate to their children nodes, the expectation of the sufficient statistic can be computed from the normalization factor. == VMP algorithm == The algorithm begins by computing the expected value of the sufficient statistics for that vector. Then, until the likelihood converges to a stable value (this is usually accomplished by setting a small threshold value and running the algorithm until it increases by less than that threshold value), do the following at each node: Get all messages from parents. Get all messages from children (this might require the children to get messages from the co-parents). Compute the expected value of the nodes sufficient statistics. == Constraints == Because every child must be conjugate to its parent, this has limited the types of distributions that can be used in the model. For example, the parents of a Gaussian distribution must be a Gaussian distribution (corresponding to the Mean) and a gamma distribution (corresponding to the precision, or one over σ {\displaystyle \sigma } in more common parameterizations). Discrete variables can have Dirichlet parents, and Poisson and exponential nodes must have gamma parents. More recently, VMP has been extended to handle models that violate this conditional conjugacy constraint. == Literature == John Winn; Christopher M. Bishop (2005). "Variational Message Passing" (PDF). Journal of Machine Learning Research. 6: 661–694. ISSN 1533-7928. Wikidata Q139488859. Beal, M.J. (2003). Variational Algorithms for Approximate Bayesian Inference (PDF) (PhD). Gatsby Computational Neuroscience Unit, University College London. Archived from the original (PDF) on 2005-04-28. Retrieved 2007-02-15.

    Read more →
  • Occam learning

    Occam learning

    In computational learning theory, Occam learning is a model of algorithmic learning where the objective of the learner is to output a succinct representation of received training data. This is closely related to probably approximately correct (PAC) learning, where the learner is evaluated on its predictive power of a test set. Occam learnability implies PAC learning, and for a wide variety of concept classes, the converse is also true: PAC learnability implies Occam learnability. == Introduction == Occam Learning is named after Occam's razor, which is a principle stating that, given all other things being equal, a shorter explanation for observed data should be favored over a lengthier explanation. The theory of Occam learning is a formal and mathematical justification for this principle. It was first shown by Blumer, et al. that Occam learning implies PAC learning, which is the standard model of learning in computational learning theory. In other words, parsimony (of the output hypothesis) implies predictive power. == Definition of Occam learning == The succinctness of a concept c {\displaystyle c} in concept class C {\displaystyle {\mathcal {C}}} can be expressed by the length s i z e ( c ) {\displaystyle size(c)} of the shortest bit string that can represent c {\displaystyle c} in C {\displaystyle {\mathcal {C}}} . Occam learning connects the succinctness of a learning algorithm's output to its predictive power on unseen data. Let C {\displaystyle {\mathcal {C}}} and H {\displaystyle {\mathcal {H}}} be concept classes containing target concepts and hypotheses respectively. Then, for constants α ≥ 0 {\displaystyle \alpha \geq 0} and 0 ≤ β < 1 {\displaystyle 0\leq \beta <1} , a learning algorithm L {\displaystyle L} is an ( α , β ) {\displaystyle (\alpha ,\beta )} -Occam algorithm for C {\displaystyle {\mathcal {C}}} using H {\displaystyle {\mathcal {H}}} iff, given a set S = { x 1 , … , x m } {\displaystyle S=\{x_{1},\dots ,x_{m}\}} of m {\displaystyle m} samples labeled according to a concept c ∈ C {\displaystyle c\in {\mathcal {C}}} , L {\displaystyle L} outputs a hypothesis h ∈ H {\displaystyle h\in {\mathcal {H}}} such that h {\displaystyle h} is consistent with c {\displaystyle c} on S {\displaystyle S} (that is, h ( x ) = c ( x ) , ∀ x ∈ S {\displaystyle h(x)=c(x),\forall x\in S} ), and s i z e ( h ) ≤ ( n ⋅ s i z e ( c ) ) α m β {\displaystyle size(h)\leq (n\cdot size(c))^{\alpha }m^{\beta }} where n {\displaystyle n} is the maximum length of any sample x ∈ S {\displaystyle x\in S} . An Occam algorithm is called efficient if it runs in time polynomial in n {\displaystyle n} , m {\displaystyle m} , and s i z e ( c ) . {\displaystyle size(c).} We say a concept class C {\displaystyle {\mathcal {C}}} is Occam learnable with respect to a hypothesis class H {\displaystyle {\mathcal {H}}} if there exists an efficient Occam algorithm for C {\displaystyle {\mathcal {C}}} using H . {\displaystyle {\mathcal {H}}.} == The relation between Occam and PAC learning == Occam learnability implies PAC learnability, as the following theorem of Blumer, et al. shows: === Theorem (Occam learning implies PAC learning) === Let L {\displaystyle L} be an efficient ( α , β ) {\displaystyle (\alpha ,\beta )} -Occam algorithm for C {\displaystyle {\mathcal {C}}} using H {\displaystyle {\mathcal {H}}} . Then there exists a constant a > 0 {\displaystyle a>0} such that for any 0 < ϵ , δ < 1 {\displaystyle 0<\epsilon ,\delta <1} , for any distribution D {\displaystyle {\mathcal {D}}} , given m ≥ a ( 1 ϵ log ⁡ 1 δ + ( ( n ⋅ s i z e ( c ) ) α ϵ ) 1 1 − β ) {\displaystyle m\geq a\left({\frac {1}{\epsilon }}\log {\frac {1}{\delta }}+\left({\frac {(n\cdot size(c))^{\alpha }}{\epsilon }}\right)^{\frac {1}{1-\beta }}\right)} samples drawn from D {\displaystyle {\mathcal {D}}} and labelled according to a concept c ∈ C {\displaystyle c\in {\mathcal {C}}} of length n {\displaystyle n} bits each, the algorithm L {\displaystyle L} will output a hypothesis h ∈ H {\displaystyle h\in {\mathcal {H}}} such that e r r o r ( h ) ≤ ϵ {\displaystyle error(h)\leq \epsilon } with probability at least 1 − δ {\displaystyle 1-\delta } .Here, e r r o r ( h ) {\displaystyle error(h)} is with respect to the concept c {\displaystyle c} and distribution D {\displaystyle {\mathcal {D}}} . This implies that the algorithm L {\displaystyle L} is also a PAC learner for the concept class C {\displaystyle {\mathcal {C}}} using hypothesis class H {\displaystyle {\mathcal {H}}} . A slightly more general formulation is as follows: === Theorem (Occam learning implies PAC learning, cardinality version) === Let 0 < ϵ , δ < 1 {\displaystyle 0<\epsilon ,\delta <1} . Let L {\displaystyle L} be an algorithm such that, given m {\displaystyle m} samples drawn from a fixed but unknown distribution D {\displaystyle {\mathcal {D}}} and labeled according to a concept c ∈ C {\displaystyle c\in {\mathcal {C}}} of length n {\displaystyle n} bits each, outputs a hypothesis h ∈ H n , m {\displaystyle h\in {\mathcal {H}}_{n,m}} that is consistent with the labeled samples. Then, there exists a constant b {\displaystyle b} such that if log ⁡ | H n , m | ≤ b ϵ m − log ⁡ 1 δ {\displaystyle \log |{\mathcal {H}}_{n,m}|\leq b\epsilon m-\log {\frac {1}{\delta }}} , then L {\displaystyle L} is guaranteed to output a hypothesis h ∈ H n , m {\displaystyle h\in {\mathcal {H}}_{n,m}} such that e r r o r ( h ) ≤ ϵ {\displaystyle error(h)\leq \epsilon } with probability at least 1 − δ {\displaystyle 1-\delta } . While the above theorems show that Occam learning is sufficient for PAC learning, it doesn't say anything about necessity. Board and Pitt show that, for a wide variety of concept classes, Occam learning is in fact necessary for PAC learning. They proved that for any concept class that is polynomially closed under exception lists, PAC learnability implies the existence of an Occam algorithm for that concept class. Concept classes that are polynomially closed under exception lists include Boolean formulas, circuits, deterministic finite automata, decision-lists, decision-trees, and other geometrically defined concept classes. A concept class C {\displaystyle {\mathcal {C}}} is polynomially closed under exception lists if there exists a polynomial-time algorithm A {\displaystyle A} such that, when given the representation of a concept c ∈ C {\displaystyle c\in {\mathcal {C}}} and a finite list E {\displaystyle E} of exceptions, outputs a representation of a concept c ′ ∈ C {\displaystyle c'\in {\mathcal {C}}} such that the concepts c {\displaystyle c} and c ′ {\displaystyle c'} agree except on the set E {\displaystyle E} . == Proof that Occam learning implies PAC learning == We first prove the Cardinality version. Call a hypothesis h ∈ H {\displaystyle h\in {\mathcal {H}}} bad if e r r o r ( h ) ≥ ϵ {\displaystyle error(h)\geq \epsilon } , where again e r r o r ( h ) {\displaystyle error(h)} is with respect to the true concept c {\displaystyle c} and the underlying distribution D {\displaystyle {\mathcal {D}}} . The probability that a set of samples S {\displaystyle S} is consistent with h {\displaystyle h} is at most ( 1 − ϵ ) m {\displaystyle (1-\epsilon )^{m}} , by the independence of the samples. By the union bound, the probability that there exists a bad hypothesis in H n , m {\displaystyle {\mathcal {H}}_{n,m}} is at most | H n , m | ( 1 − ϵ ) m {\displaystyle |{\mathcal {H}}_{n,m}|(1-\epsilon )^{m}} , which is less than δ {\displaystyle \delta } if log ⁡ | H n , m | ≤ O ( ϵ m ) − log ⁡ 1 δ {\displaystyle \log |{\mathcal {H}}_{n,m}|\leq O(\epsilon m)-\log {\frac {1}{\delta }}} . This concludes the proof of the second theorem above. Using the second theorem, we can prove the first theorem. Since we have a ( α , β ) {\displaystyle (\alpha ,\beta )} -Occam algorithm, this means that any hypothesis output by L {\displaystyle L} can be represented by at most ( n ⋅ s i z e ( c ) ) α m β {\displaystyle (n\cdot size(c))^{\alpha }m^{\beta }} bits, and thus log ⁡ | H n , m | ≤ ( n ⋅ s i z e ( c ) ) α m β {\displaystyle \log |{\mathcal {H}}_{n,m}|\leq (n\cdot size(c))^{\alpha }m^{\beta }} . This is less than O ( ϵ m ) − log ⁡ 1 δ {\displaystyle O(\epsilon m)-\log {\frac {1}{\delta }}} if we set m ≥ a ( 1 ϵ log ⁡ 1 δ + ( ( n ⋅ s i z e ( c ) ) α ) ϵ ) 1 1 − β ) {\displaystyle m\geq a\left({\frac {1}{\epsilon }}\log {\frac {1}{\delta }}+\left({\frac {(n\cdot size(c))^{\alpha })}{\epsilon }}\right)^{\frac {1}{1-\beta }}\right)} for some constant a > 0 {\displaystyle a>0} . Thus, by the Cardinality version Theorem, L {\displaystyle L} will output a consistent hypothesis h {\displaystyle h} with probability at least 1 − δ {\displaystyle 1-\delta } . This concludes the proof of the first theorem above. == Improving sample complexity for common problems == Though Occam and PAC learnability are equivalent, the Occam framework can be used to produce tighter bounds on the sample complexity of classical problems including conjunctions, co

    Read more →
  • Algorithmic learning theory

    Algorithmic learning theory

    Algorithmic learning theory is a mathematical framework for analyzing machine learning problems and algorithms. Synonyms include formal learning theory and algorithmic inductive inference. Algorithmic learning theory is different from statistical learning theory in that it does not make use of statistical assumptions and analysis. Both algorithmic and statistical learning theory are concerned with machine learning and can thus be viewed as branches of computational learning theory. == Distinguishing characteristics == Unlike statistical learning theory and most statistical theory in general, algorithmic learning theory does not assume that data are random samples, that is, that data points are independent of each other. This makes the theory suitable for domains where observations are (relatively) noise-free but not random, such as language learning and automated scientific discovery. The fundamental concept of algorithmic learning theory is learning in the limit: as the number of data points increases, a learning algorithm should converge to a correct hypothesis on every possible data sequence consistent with the problem space. This is a non-probabilistic version of statistical consistency, which also requires convergence to a correct model in the limit, but allows a learner to fail on data sequences with probability measure 0 . Algorithmic learning theory investigates the learning power of Turing machines. Other frameworks consider a much more restricted class of learning algorithms than Turing machines, for example, learners that compute hypotheses more quickly, for instance in polynomial time. An example of such a framework is probably approximately correct learning . == Learning in the limit == The concept was introduced in E. Mark Gold's seminal paper "Language identification in the limit". The objective of language identification is for a machine running one program to be capable of developing another program by which any given sentence can be tested to determine whether it is "grammatical" or "ungrammatical". The language being learned need not be English or any other natural language - in fact the definition of "grammatical" can be absolutely anything known to the tester. In Gold's learning model, the tester gives the learner an example sentence at each step, and the learner responds with a hypothesis, which is a suggested program to determine grammatical correctness. It is required of the tester that every possible sentence (grammatical or not) appears in the list eventually, but no particular order is required. It is required of the learner that at each step the hypothesis must be correct for all the sentences so far. A particular learner is said to be able to "learn a language in the limit" if there is a certain number of steps beyond which its hypothesis no longer changes. At this point it has indeed learned the language, because every possible sentence appears somewhere in the sequence of inputs (past or future), and the hypothesis is correct for all inputs (past or future), so the hypothesis is correct for every sentence. The learner is not required to be able to tell when it has reached a correct hypothesis, all that is required is that it be true. Gold showed that any language which is defined by a Turing machine program can be learned in the limit by another Turing-complete machine using enumeration. This is done by the learner testing all possible Turing machine programs in turn until one is found which is correct so far - this forms the hypothesis for the current step. Eventually, the correct program will be reached, after which the hypothesis will never change again (but note that the learner does not know that it won't need to change). Gold also showed that if the learner is given only positive examples (that is, only grammatical sentences appear in the input, not ungrammatical sentences), then the language can only be guaranteed to be learned in the limit if there are only a finite number of possible sentences in the language (this is possible if, for example, sentences are known to be of limited length). Language identification in the limit is a highly abstract model. It does not allow for limits of runtime or computer memory which can occur in practice, and the enumeration method may fail if there are errors in the input. However the framework is very powerful, because if these strict conditions are maintained, it allows the learning of any program known to be computable. This is because a Turing machine program can be written to mimic any program in any conventional programming language. See Church-Turing thesis. == Other identification criteria == Learning theorists have investigated other learning criteria, such as the following. Efficiency: minimizing the number of data points required before convergence to a correct hypothesis. Mind Changes: minimizing the number of hypothesis changes that occur before convergence. Mind change bounds are closely related to mistake bounds that are studied in statistical learning theory. Kevin Kelly has suggested that minimizing mind changes is closely related to choosing maximally simple hypotheses in the sense of Occam’s Razor. == Annual conference == Since 1990, there is an International Conference on Algorithmic Learning Theory (ALT), called Workshop in its first years (1990–1997). Between 1992 and 2016, proceedings were published in the LNCS series. Starting from 2017, they are published by the Proceedings of Machine Learning Research. The 34th conference will be held in Singapore in Feb 2023. The topics of the conference cover all of theoretical machine learning, including statistical and computational learning theory, online learning, active learning, reinforcement learning, and deep learning.

    Read more →
  • Personoid

    Personoid

    Personoid is the concept coined by Stanisław Lem, a Polish science-fiction writer, in Non Serviam, from his book A Perfect Vacuum (1971). His personoids are an abstraction of functions of human mind and they live in computers; they do not need any human-like physical body. In cognitive and software modeling, personoid is a research approach to the development of intelligent autonomous agents. In frame of the IPK (Information, Preferences, Knowledge) architecture, it is a framework of abstract intelligent agent with a cognitive and structural intelligence. It can be seen as an essence of high intelligent entities. From the philosophical and systemics perspectives, personoid societies can also be seen as the carriers of a culture. According to N. Gessler, the personoids study can be a base for the research on artificial culture and culture evolution. == Personoids on TV and cinema == Welt am Draht (1973) The Thirteenth Floor (1999)

    Read more →
  • Apache Giraph

    Apache Giraph

    Apache Giraph is an Apache project to perform graph processing on big data. Giraph utilizes Apache Hadoop's MapReduce implementation to process graphs. Facebook used Giraph with some performance improvements to analyze one trillion edges using 200 machines in 4 minutes. Giraph is based on a paper published by Google about its own graph processing system called Pregel. It can be compared to other Big Graph processing libraries such as Cassovary. As of September 2023, it is no longer actively developed.

    Read more →
  • Algorithmic learning theory

    Algorithmic learning theory

    Algorithmic learning theory is a mathematical framework for analyzing machine learning problems and algorithms. Synonyms include formal learning theory and algorithmic inductive inference. Algorithmic learning theory is different from statistical learning theory in that it does not make use of statistical assumptions and analysis. Both algorithmic and statistical learning theory are concerned with machine learning and can thus be viewed as branches of computational learning theory. == Distinguishing characteristics == Unlike statistical learning theory and most statistical theory in general, algorithmic learning theory does not assume that data are random samples, that is, that data points are independent of each other. This makes the theory suitable for domains where observations are (relatively) noise-free but not random, such as language learning and automated scientific discovery. The fundamental concept of algorithmic learning theory is learning in the limit: as the number of data points increases, a learning algorithm should converge to a correct hypothesis on every possible data sequence consistent with the problem space. This is a non-probabilistic version of statistical consistency, which also requires convergence to a correct model in the limit, but allows a learner to fail on data sequences with probability measure 0 . Algorithmic learning theory investigates the learning power of Turing machines. Other frameworks consider a much more restricted class of learning algorithms than Turing machines, for example, learners that compute hypotheses more quickly, for instance in polynomial time. An example of such a framework is probably approximately correct learning . == Learning in the limit == The concept was introduced in E. Mark Gold's seminal paper "Language identification in the limit". The objective of language identification is for a machine running one program to be capable of developing another program by which any given sentence can be tested to determine whether it is "grammatical" or "ungrammatical". The language being learned need not be English or any other natural language - in fact the definition of "grammatical" can be absolutely anything known to the tester. In Gold's learning model, the tester gives the learner an example sentence at each step, and the learner responds with a hypothesis, which is a suggested program to determine grammatical correctness. It is required of the tester that every possible sentence (grammatical or not) appears in the list eventually, but no particular order is required. It is required of the learner that at each step the hypothesis must be correct for all the sentences so far. A particular learner is said to be able to "learn a language in the limit" if there is a certain number of steps beyond which its hypothesis no longer changes. At this point it has indeed learned the language, because every possible sentence appears somewhere in the sequence of inputs (past or future), and the hypothesis is correct for all inputs (past or future), so the hypothesis is correct for every sentence. The learner is not required to be able to tell when it has reached a correct hypothesis, all that is required is that it be true. Gold showed that any language which is defined by a Turing machine program can be learned in the limit by another Turing-complete machine using enumeration. This is done by the learner testing all possible Turing machine programs in turn until one is found which is correct so far - this forms the hypothesis for the current step. Eventually, the correct program will be reached, after which the hypothesis will never change again (but note that the learner does not know that it won't need to change). Gold also showed that if the learner is given only positive examples (that is, only grammatical sentences appear in the input, not ungrammatical sentences), then the language can only be guaranteed to be learned in the limit if there are only a finite number of possible sentences in the language (this is possible if, for example, sentences are known to be of limited length). Language identification in the limit is a highly abstract model. It does not allow for limits of runtime or computer memory which can occur in practice, and the enumeration method may fail if there are errors in the input. However the framework is very powerful, because if these strict conditions are maintained, it allows the learning of any program known to be computable. This is because a Turing machine program can be written to mimic any program in any conventional programming language. See Church-Turing thesis. == Other identification criteria == Learning theorists have investigated other learning criteria, such as the following. Efficiency: minimizing the number of data points required before convergence to a correct hypothesis. Mind Changes: minimizing the number of hypothesis changes that occur before convergence. Mind change bounds are closely related to mistake bounds that are studied in statistical learning theory. Kevin Kelly has suggested that minimizing mind changes is closely related to choosing maximally simple hypotheses in the sense of Occam’s Razor. == Annual conference == Since 1990, there is an International Conference on Algorithmic Learning Theory (ALT), called Workshop in its first years (1990–1997). Between 1992 and 2016, proceedings were published in the LNCS series. Starting from 2017, they are published by the Proceedings of Machine Learning Research. The 34th conference will be held in Singapore in Feb 2023. The topics of the conference cover all of theoretical machine learning, including statistical and computational learning theory, online learning, active learning, reinforcement learning, and deep learning.

    Read more →
  • Sufficient dimension reduction

    Sufficient dimension reduction

    In statistics, sufficient dimension reduction (SDR) is a paradigm for analyzing data that combines the ideas of dimension reduction with the concept of sufficiency. Dimension reduction has long been a primary goal of regression analysis. Given a response variable y and a p-dimensional predictor vector x {\displaystyle {\textbf {x}}} , regression analysis aims to study the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , the conditional distribution of y {\displaystyle y} given x {\displaystyle {\textbf {x}}} . A dimension reduction is a function R ( x ) {\displaystyle R({\textbf {x}})} that maps x {\displaystyle {\textbf {x}}} to a subset of R k {\displaystyle \mathbb {R} ^{k}} , k < p, thereby reducing the dimension of x {\displaystyle {\textbf {x}}} . For example, R ( x ) {\displaystyle R({\textbf {x}})} may be one or more linear combinations of x {\displaystyle {\textbf {x}}} . A dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} is said to be sufficient if the distribution of y ∣ R ( x ) {\displaystyle y\mid R({\textbf {x}})} is the same as that of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, no information about the regression is lost in reducing the dimension of x {\displaystyle {\textbf {x}}} if the reduction is sufficient. == Graphical motivation == In a regression setting, it is often useful to summarize the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} graphically. For instance, one may consider a scatterplot of y {\displaystyle y} versus one or more of the predictors or a linear combination of the predictors. A scatterplot that contains all available regression information is called a sufficient summary plot. When x {\displaystyle {\textbf {x}}} is high-dimensional, particularly when p ≥ 3 {\displaystyle p\geq 3} , it becomes increasingly challenging to construct and visually interpret sufficiency summary plots without reducing the data. Even three-dimensional scatter plots must be viewed via a computer program, and the third dimension can only be visualized by rotating the coordinate axes. However, if there exists a sufficient dimension reduction R ( x ) {\displaystyle R({\textbf {x}})} with small enough dimension, a sufficient summary plot of y {\displaystyle y} versus R ( x ) {\displaystyle R({\textbf {x}})} may be constructed and visually interpreted with relative ease. Hence sufficient dimension reduction allows for graphical intuition about the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} , which might not have otherwise been available for high-dimensional data. Most graphical methodology focuses primarily on dimension reduction involving linear combinations of x {\displaystyle {\textbf {x}}} . The rest of this article deals only with such reductions. == Dimension reduction subspace == Suppose R ( x ) = A T x {\displaystyle R({\textbf {x}})=A^{T}{\textbf {x}}} is a sufficient dimension reduction, where A {\displaystyle A} is a p × k {\displaystyle p\times k} matrix with rank k ≤ p {\displaystyle k\leq p} . Then the regression information for y ∣ x {\displaystyle y\mid {\textbf {x}}} can be inferred by studying the distribution of y ∣ A T x {\displaystyle y\mid A^{T}{\textbf {x}}} , and the plot of y {\displaystyle y} versus A T x {\displaystyle A^{T}{\textbf {x}}} is a sufficient summary plot. Without loss of generality, only the space spanned by the columns of A {\displaystyle A} need be considered. Let η {\displaystyle \eta } be a basis for the column space of A {\displaystyle A} , and let the space spanned by η {\displaystyle \eta } be denoted by S ( η ) {\displaystyle {\mathcal {S}}(\eta )} . It follows from the definition of a sufficient dimension reduction that F y ∣ x = F y ∣ η T x , {\displaystyle F_{y\mid x}=F_{y\mid \eta ^{T}x},} where F {\displaystyle F} denotes the appropriate distribution function. Another way to express this property is y ⊥ ⊥ x ∣ η T x , {\displaystyle y\perp \!\!\!\perp {\textbf {x}}\mid \eta ^{T}{\textbf {x}},} or y {\displaystyle y} is conditionally independent of x {\displaystyle {\textbf {x}}} , given η T x {\displaystyle \eta ^{T}{\textbf {x}}} . Then the subspace S ( η ) {\displaystyle {\mathcal {S}}(\eta )} is defined to be a dimension reduction subspace (DRS). === Structural dimensionality === For a regression y ∣ x {\displaystyle y\mid {\textbf {x}}} , the structural dimension, d {\displaystyle d} , is the smallest number of distinct linear combinations of x {\displaystyle {\textbf {x}}} necessary to preserve the conditional distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} . In other words, the smallest dimension reduction that is still sufficient maps x {\displaystyle {\textbf {x}}} to a subset of R d {\displaystyle \mathbb {R} ^{d}} . The corresponding DRS will be d-dimensional. === Minimum dimension reduction subspace === A subspace S {\displaystyle {\mathcal {S}}} is said to be a minimum DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} if it is a DRS and its dimension is less than or equal to that of all other DRSs for y ∣ x {\displaystyle y\mid {\textbf {x}}} . A minimum DRS S {\displaystyle {\mathcal {S}}} is not necessarily unique, but its dimension is equal to the structural dimension d {\displaystyle d} of y ∣ x {\displaystyle y\mid {\textbf {x}}} , by definition. If S {\displaystyle {\mathcal {S}}} has basis η {\displaystyle \eta } and is a minimum DRS, then a plot of y versus η T x {\displaystyle \eta ^{T}{\textbf {x}}} is a minimal sufficient summary plot, and it is (d + 1)-dimensional. == Central subspace == If a subspace S {\displaystyle {\mathcal {S}}} is a DRS for y ∣ x {\displaystyle y\mid {\textbf {x}}} , and if S ⊂ S drs {\displaystyle {\mathcal {S}}\subset {\mathcal {S}}_{\text{drs}}} for all other DRSs S drs {\displaystyle {\mathcal {S}}_{\text{drs}}} , then it is a central dimension reduction subspace, or simply a central subspace, and it is denoted by S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . In other words, a central subspace for y ∣ x {\displaystyle y\mid {\textbf {x}}} exists if and only if the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} of all dimension reduction subspaces is also a dimension reduction subspace, and that intersection is the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} . The central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does not necessarily exist because the intersection ⋂ S drs {\textstyle \bigcap {\mathcal {S}}_{\text{drs}}} is not necessarily a DRS. However, if S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} does exist, then it is also the unique minimum dimension reduction subspace. === Existence of the central subspace === While the existence of the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} is not guaranteed in every regression situation, there are some rather broad conditions under which its existence follows directly. For example, consider the following proposition from Cook (1998): Let S 1 {\displaystyle {\mathcal {S}}_{1}} and S 2 {\displaystyle {\mathcal {S}}_{2}} be dimension reduction subspaces for y ∣ x {\displaystyle y\mid {\textbf {x}}} . If x {\displaystyle {\textbf {x}}} has density f ( a ) > 0 {\displaystyle f(a)>0} for all a ∈ Ω x {\displaystyle a\in \Omega _{x}} and f ( a ) = 0 {\displaystyle f(a)=0} everywhere else, where Ω x {\displaystyle \Omega _{x}} is convex, then the intersection S 1 ∩ S 2 {\displaystyle {\mathcal {S}}_{1}\cap {\mathcal {S}}_{2}} is also a dimension reduction subspace. It follows from this proposition that the central subspace S y ∣ x {\displaystyle {\mathcal {S}}_{y\mid x}} exists for such x {\displaystyle {\textbf {x}}} . == Methods for dimension reduction == There are many existing methods for dimension reduction, both graphical and numeric. For example, sliced inverse regression (SIR) and sliced average variance estimation (SAVE) were introduced in the 1990s and continue to be widely used. Although SIR was originally designed to estimate an effective dimension reducing subspace, it is now understood that it estimates only the central subspace, which is generally different. More recent methods for dimension reduction include likelihood-based sufficient dimension reduction, estimating the central subspace based on the inverse third moment (or kth moment), estimating the central solution space, graphical regression, envelope model, and the principal support vector machine. For more details on these and other methods, consult the statistical literature. Principal components analysis (PCA) and similar methods for dimension reduction are not based on the sufficiency principle. === Example: linear regression === Consider the regression model y = α + β T x + ε , where ε ⊥ ⊥ x . {\displaystyle y=\alpha +\beta ^{T}{\textbf {x}}+\varepsilon ,{\text{ where }}\varepsilon \perp \!\!\!\perp {\textbf {x}}.} Note that the distribution of y ∣ x {\displaystyle y\mid {\textbf {x}}} is the same as the distribution of y ∣ β T x {\displ

    Read more →
  • Integrated test facility

    Integrated test facility

    An integrated test facility (ITF) creates a fictitious entity in a database to process test transactions simultaneously with live input. ITF can be used to incorporate test transactions into a normal production run of a system. Its advantage is that periodic testing does not require separate test processes. However, careful planning is necessary, and test data must be isolated from production data. Moreover, ITF validates the correct operation of a transaction in an application, but it does not ensure that a system is being operated correctly. Integrated test facility is considered a useful audit tool during an IT audit because it uses the same programs to compare processing using independently calculated data. This involves setting up dummy entities on an application system and processing test or production data against the entity as a means of verifying processing accuracy.

    Read more →
  • Averaged one-dependence estimators

    Averaged one-dependence estimators

    Averaged one-dependence estimators (AODE) is a probabilistic classification learning technique. It was developed to address the attribute-independence problem of the popular naive Bayes classifier. It frequently develops substantially more accurate classifiers than naive Bayes at the cost of a modest increase in the amount of computation. == The AODE classifier == AODE seeks to estimate the probability of each class y given a specified set of features x1, ... xn, P(y | x1, ... xn). To do so it uses the formula P ^ ( y ∣ x 1 , … x n ) = ∑ i : 1 ≤ i ≤ n ∧ F ( x i ) ≥ m P ^ ( y , x i ) ∏ j = 1 n P ^ ( x j ∣ y , x i ) ∑ y ′ ∈ Y ∑ i : 1 ≤ i ≤ n ∧ F ( x i ) ≥ m P ^ ( y ′ , x i ) ∏ j = 1 n P ^ ( x j ∣ y ′ , x i ) {\displaystyle {\hat {P}}(y\mid x_{1},\ldots x_{n})={\frac {\sum _{i:1\leq i\leq n\wedge F(x_{i})\geq m}{\hat {P}}(y,x_{i})\prod _{j=1}^{n}{\hat {P}}(x_{j}\mid y,x_{i})}{\sum _{y^{\prime }\in Y}\sum _{i:1\leq i\leq n\wedge F(x_{i})\geq m}{\hat {P}}(y^{\prime },x_{i})\prod _{j=1}^{n}{\hat {P}}(x_{j}\mid y^{\prime },x_{i})}}} where P ^ ( ⋅ ) {\displaystyle {\hat {P}}(\cdot )} denotes an estimate of P ( ⋅ ) {\displaystyle P(\cdot )} , F ( ⋅ ) {\displaystyle F(\cdot )} is the frequency with which the argument appears in the sample data and m is a user specified minimum frequency with which a term must appear in order to be used in the outer summation. In recent practice m is usually set at 1. == Derivation of the AODE classifier == We seek to estimate P(y | x1, ... xn). By the definition of conditional probability P ( y ∣ x 1 , … x n ) = P ( y , x 1 , … x n ) P ( x 1 , … x n ) . {\displaystyle P(y\mid x_{1},\ldots x_{n})={\frac {P(y,x_{1},\ldots x_{n})}{P(x_{1},\ldots x_{n})}}.} For any 1 ≤ i ≤ n {\displaystyle 1\leq i\leq n} , P ( y , x 1 , … x n ) = P ( y , x i ) P ( x 1 , … x n ∣ y , x i ) . {\displaystyle P(y,x_{1},\ldots x_{n})=P(y,x_{i})P(x_{1},\ldots x_{n}\mid y,x_{i}).} Under an assumption that x1, ... xn are independent given y and xi, it follows that P ( y , x 1 , … x n ) = P ( y , x i ) ∏ j = 1 n P ( x j ∣ y , x i ) . {\displaystyle P(y,x_{1},\ldots x_{n})=P(y,x_{i})\prod _{j=1}^{n}P(x_{j}\mid y,x_{i}).} This formula defines a special form of One Dependence Estimator (ODE), a variant of the naive Bayes classifier that makes the above independence assumption that is weaker (and hence potentially less harmful) than the naive Bayes' independence assumption. In consequence, each ODE should create a less biased estimator than naive Bayes. However, because the base probability estimates are each conditioned by two variables rather than one, they are formed from less data (the training examples that satisfy both variables) and hence are likely to have more variance. AODE reduces this variance by averaging the estimates of all such ODEs. == Features of the AODE classifier == Like naive Bayes, AODE does not perform model selection and does not use tuneable parameters. As a result, it has low variance. It supports incremental learning whereby the classifier can be updated efficiently with information from new examples as they become available. It predicts class probabilities rather than simply predicting a single class, allowing the user to determine the confidence with which each classification can be made. Its probabilistic model can directly handle situations where some data are missing. AODE has computational complexity O ( l n 2 ) {\displaystyle O(ln^{2})} at training time and O ( k n 2 ) {\displaystyle O(kn^{2})} at classification time, where n is the number of features, l is the number of training examples and k is the number of classes. This makes it infeasible for application to high-dimensional data. However, within that limitation, it is linear with respect to the number of training examples and hence can efficiently process large numbers of training examples. == Implementations == The free Weka machine learning suite includes an implementation of AODE.

    Read more →
  • Mutation (evolutionary algorithm)

    Mutation (evolutionary algorithm)

    Mutation is a genetic operator used to maintain genetic diversity of the chromosomes of a population of an evolutionary algorithm (EA), including genetic algorithms in particular. It is analogous to biological mutation. The classic example of a mutation operator of a binary coded genetic algorithm (GA) involves a probability that an arbitrary bit in a genetic sequence will be flipped from its original state. A common method of implementing the mutation operator involves generating a random variable for each bit in a sequence. This random variable tells whether or not a particular bit will be flipped. This mutation procedure, based on the biological point mutation, is called single point mutation. Other types of mutation operators are commonly used for representations other than binary, such as floating-point encodings or representations for combinatorial problems. The purpose of mutation in EAs is to introduce diversity into the sampled population. Mutation operators are used in an attempt to avoid local minima by preventing the population of chromosomes from becoming too similar to each other, thus slowing or even stopping convergence to the global optimum. This reasoning also leads most EAs to avoid only taking the fittest of the population in generating the next generation, but rather selecting a random (or semi-random) set with a weighting toward those that are fitter. The following requirements apply to all mutation operators used in an EA: every point in the search space must be reachable by one or more mutations. there must be no preference for parts or directions in the search space (no drift). small mutations should be more probable than large ones. For different genome types, different mutation types are suitable. Some mutations are Gaussian, Uniform, Zigzag, Scramble, Insertion, Inversion, Swap, and so on. An overview and more operators than those presented below can be found in the introductory book by Eiben and Smith or in. == Bit string mutation == The mutation of bit strings ensue through bit flips at random positions. Example: The probability of a mutation of a bit is 1 l {\displaystyle {\frac {1}{l}}} , where l {\displaystyle l} is the length of the binary vector. Thus, a mutation rate of 1 {\displaystyle 1} per mutation and individual selected for mutation is reached. == Mutation of real numbers == Many EAs, such as the evolution strategy or the real-coded genetic algorithms, work with real numbers instead of bit strings. This is due to the good experiences that have been made with this type of coding. The value of a real-valued gene can either be changed or redetermined. A mutation that implements the latter should only ever be used in conjunction with the value-changing mutations and then only with comparatively low probability, as it can lead to large changes. In practical applications, the respective value range of the decision variables to be changed of the optimisation problem to be solved is usually limited. Accordingly, the values of the associated genes are each restricted to an interval [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} . Mutations may or may not take these restrictions into account. In the latter case, suitable post-treatment is then required as described below. === Mutation without consideration of restrictions === A real number x {\displaystyle x} can be mutated using normal distribution N ( 0 , σ ) {\displaystyle {\mathcal {N}}(0,\sigma )} by adding the generated random value to the old value of the gene, resulting in the mutated value x ′ {\displaystyle x'} : x ′ = x + N ( 0 , σ ) {\displaystyle x'=x+{\mathcal {N}}(0,\sigma )} In the case of genes with a restricted range of values, it is a good idea to choose the step size of the mutation σ {\displaystyle \sigma } so that it reasonably fits the range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} of the gene to be changed, e.g.: σ = x max − x min 6 {\displaystyle \sigma ={\frac {x_{\text{max}}-x_{\text{min}}}{6}}} The step size can also be adjusted to the smaller permissible change range depending on the current value. In any case, however, it is likely that the new value x ′ {\displaystyle x'} of the gene will be outside the permissible range of values. Such a case must be considered a lethal mutation, since the obvious repair by using the respective violated limit as the new value of the gene would lead to a drift. This is because the limit value would then be selected with the entire probability of the values beyond the limit of the value range. The evolution strategy works with real numbers and mutation based on normal distribution. The step sizes are part of the chromosome and are subject to evolution together with the actual decision variables. === Mutation with consideration of restrictions === One possible form of changing the value of a gene while taking its value range [ x min , x max ] {\displaystyle [x_{\min },x_{\max }]} into account is the mutation relative parameter change of the evolutionary algorithm GLEAM (General Learning Evolutionary Algorithm and Method), in which, as with the mutation presented earlier, small changes are more likely than large ones. First, an equally distributed decision is made as to whether the current value x {\displaystyle x} should be increased or decreased and then the corresponding total change interval is determined. Without loss of generality, an increase is assumed for the explanation and the total change interval is then [ x , x max ] {\displaystyle [x,x_{\max }]} . It is divided into k {\displaystyle k} sub-areas of equal size with the width δ {\displaystyle \delta } , from which k {\displaystyle k} sub-change intervals of different size are formed: i {\displaystyle i} -th sub-change interval: [ x , x + δ ⋅ i ] {\displaystyle [x,x+\delta \cdot i]} with δ = ( x max − x ) k {\displaystyle \delta ={\frac {(x_{\text{max}}-x)}{k}}} and i = 1 , … , k {\displaystyle i=1,\dots ,k} Subsequently, one of the k {\displaystyle k} sub-change intervals is selected in equal distribution and a random number, also equally distributed, is drawn from it as the new value x ′ {\displaystyle x'} of the gene. The resulting summed probabilities of the sub-change intervals result in the probability distribution of the k {\displaystyle k} sub-areas shown in the adjacent figure for the exemplary case of k = 10 {\displaystyle k=10} . This is not a normal distribution as before, but this distribution also clearly favours small changes over larger ones. This mutation for larger values of k {\displaystyle k} , such as 10, is less well suited for tasks where the optimum lies on one of the value range boundaries. This can be remedied by significantly reducing k {\displaystyle k} when a gene value approaches its limits very closely. === Common properties === For both mutation operators for real-valued numbers, the probability of an increase and decrease is independent of the current value and is 50% in each case. In addition, small changes are considerably more likely than large ones. For mixed-integer optimization problems, rounding is usually used. == Mutation of permutations == Mutations of permutations are specially designed for genomes that are themselves permutations of a set. These are often used to solve combinatorial tasks. In the two mutations presented, parts of the genome are rotated or inverted. === Rotation to the right === The presentation of the procedure is illustrated by an example on the right: === Inversion === The presentation of the procedure is illustrated by an example on the right: === Variants with preference for smaller changes === The requirement raised at the beginning for mutations, according to which small changes should be more probable than large ones, is only inadequately fulfilled by the two permutation mutations presented, since the lengths of the partial lists and the number of shift positions are determined in an equally distributed manner. However, the longer the partial list and the shift, the greater the change in gene order. This can be remedied by the following modifications. The end index j {\displaystyle j} of the partial lists is determined as the distance d {\displaystyle d} to the start index i {\displaystyle i} : j = ( i + d ) mod | P 0 | {\displaystyle j=(i+d){\bmod {\left|P_{0}\right|}}} where d {\displaystyle d} is determined randomly according to one of the two procedures for the mutation of real numbers from the interval [ 0 , | P 0 | − 1 ] {\displaystyle \left[0,\left|P_{0}\right|-1\right]} and rounded. For the rotation, k {\displaystyle k} is determined similarly to the distance d {\displaystyle d} , but the value 0 {\displaystyle 0} is forbidden. For the inversion, note that i ≠ j {\displaystyle i\neq j} must hold, so for d {\displaystyle d} the value 0 {\displaystyle 0} must be excluded.

    Read more →
  • Crossover (evolutionary algorithm)

    Crossover (evolutionary algorithm)

    Crossover in evolutionary algorithms and evolutionary computation, also called recombination, is a genetic operator used to combine the genetic information of two parents to generate new offspring. It is one way to stochastically generate new solutions from an existing population, and is analogous to the crossover that happens during sexual reproduction in biology. New solutions can also be generated by cloning an existing solution, which is analogous to asexual reproduction. Newly generated solutions may be mutated before being added to the population. The aim of recombination is to transfer good characteristics from two different parents to one child. Different algorithms in evolutionary computation may use different data structures to store genetic information, and each genetic representation can be recombined with different crossover operators. Typical data structures that can be recombined with crossover are bit arrays, vectors of real numbers, or trees. The list of operators presented below is by no means complete and serves mainly as an exemplary illustration of this dyadic genetic operator type. More operators and more details can be found in the literature. == Crossover for binary arrays == Traditional genetic algorithms store genetic information in a chromosome represented by a bit array. Crossover methods for bit arrays are popular and an illustrative example of genetic recombination. === One-point crossover === A point on both parents' chromosomes is picked randomly, and designated a 'crossover point'. Bits to the right of that point are swapped between the two parent chromosomes. This results in two offspring, each carrying some genetic information from both parents. === Two-point and k-point crossover === In two-point crossover, two crossover points are picked randomly from the parent chromosomes. The bits in between the two points are swapped between the parent organisms. Two-point crossover is equivalent to performing two single-point crossovers with different crossover points. This strategy can be generalized to k-point crossover for any positive integer k, picking k crossover points. === Uniform crossover === In uniform crossover, typically, each bit is chosen from either parent with equal probability. Other mixing ratios are sometimes used, resulting in offspring which inherit more genetic information from one parent than the other. In a uniform crossover, we don’t divide the chromosome into segments, rather we treat each gene separately. In this, we essentially flip a coin for each chromosome to decide whether or not it will be included in the off-spring. == Crossover for integer or real-valued genomes == For the crossover operators presented above and for most other crossover operators for bit strings, it holds that they can also be applied accordingly to integer or real-valued genomes whose genes each consist of an integer or real-valued number. Instead of individual bits, integer or real-valued numbers are then simply copied into the child genome. The offspring lie on the remaining corners of the hyperbody spanned by the two parents P 1 = ( 1.5 , 6 , 8 ) {\displaystyle P_{1}=(1.5,6,8)} and P 2 = ( 7 , 2 , 1 ) {\displaystyle P_{2}=(7,2,1)} , as exemplified in the accompanying image for the three-dimensional case. === Discrete recombination === If the rules of the uniform crossover for bit strings are applied during the generation of the offspring, this is also called discrete recombination. === Intermediate recombination === In this recombination operator, the allele values of the child genome a i {\displaystyle a_{i}} are generated by mixing the alleles of the two parent genomes a i , P 1 {\displaystyle a_{i,P_{1}}} and a i , P 2 {\displaystyle a_{i,P_{2}}} : α i = α i , P 1 ⋅ β i + α i , P 2 ⋅ ( 1 − β i ) w i t h β i ∈ [ − d , 1 + d ] {\displaystyle \alpha _{i}=\alpha _{i,P_{1}}\cdot \beta _{i}+\alpha _{i,P_{2}}\cdot \left(1-\beta _{i}\right)\quad {\mathsf {with}}\quad \beta _{i}\in \left[-d,1+d\right]} randomly equally distributed per gene i {\displaystyle i} The choice of the interval [ − d , 1 + d ] {\displaystyle [-d,1+d]} causes that besides the interior of the hyperbody spanned by the allele values of the parent genes additionally a certain environment for the range of values of the offspring is in question. A value of 0.25 {\displaystyle 0.25} is recommended for d {\displaystyle d} to counteract the tendency to reduce the allele values that otherwise exists at d = 0 {\displaystyle d=0} . The adjacent figure shows for the two-dimensional case the range of possible new alleles of the two exemplary parents P 1 = ( 3 , 6 ) {\displaystyle P_{1}=(3,6)} and P 2 = ( 9 , 2 ) {\displaystyle P_{2}=(9,2)} in intermediate recombination. The offspring of discrete recombination C 1 {\displaystyle C_{1}} and C 2 {\displaystyle C_{2}} are also plotted. Intermediate recombination satisfies the arithmetic calculation of the allele values of the child genome required by virtual alphabet theory. Discrete and intermediate recombination are used as a standard in the evolution strategy. == Crossover for permutations == For combinatorial tasks, permutations are usually used that are specifically designed for genomes that are themselves permutations of a set. The underlying set is usually a subset of N {\displaystyle \mathbb {N} } or N 0 {\displaystyle \mathbb {N} _{0}} . If 1- or n-point or uniform crossover for integer genomes is used for such genomes, a child genome may contain some values twice and others may be missing. This can be remedied by genetic repair, e.g. by replacing the redundant genes in positional fidelity for missing ones from the other child genome. In order to avoid the generation of invalid offspring, special crossover operators for permutations have been developed which fulfill the basic requirements of such operators for permutations, namely that all elements of the initial permutation are also present in the new one and only the order is changed. It can be distinguished between combinatorial tasks, where all sequences are admissible, and those where there are constraints in the form of inadmissible partial sequences. A well-known representative of the first task type is the traveling salesman problem (TSP), where the goal is to visit a set of cities exactly once on the shortest tour. An example of the constrained task type is the scheduling of multiple workflows. Workflows involve sequence constraints on some of the individual work steps. For example, a thread cannot be cut until the corresponding hole has been drilled in a workpiece. Such problems are also called order-based permutations. In the following, two crossover operators are presented as examples, the partially mapped crossover (PMX) motivated by the TSP and the order crossover (OX1) designed for order-based permutations. A second offspring can be produced in each case by exchanging the parent chromosomes. === Partially mapped crossover (PMX) === The PMX operator was designed as a recombination operator for TSP like Problems. The explanation of the procedure is illustrated by an example: === Order crossover (OX1) === The order crossover goes back to Davis in its original form and is presented here in a slightly generalized version with more than two crossover points. It transfers information about the relative order from the second parent to the offspring. First, the number and position of the crossover points are determined randomly. The resulting gene sequences are then processed as described below: Among other things, order crossover is well suited for scheduling multiple workflows, when used in conjunction with 1- and n-point crossover. === Further crossover operators for permutations === Over time, a large number of crossover operators for permutations have been proposed, so the following list is only a small selection. For more information, the reader is referred to the literature. cycle crossover (CX) order-based crossover (OX2) position-based crossover (POS) edge recombination voting recombination (VR) alternating-positions crossover (AP) maximal preservative crossover (MPX) merge crossover (MX) sequential constructive crossover operator (SCX) The usual approach to solving TSP-like problems by genetic or, more generally, evolutionary algorithms, presented earlier, is either to repair illegal descendants or to adjust the operators appropriately so that illegal offspring do not arise in the first place. Alternatively, Riazi suggests the use of a double chromosome representation, which avoids illegal offspring.

    Read more →
  • Software construction

    Software construction

    Software construction is the process of creating working software via coding and integration. The process includes unit and integration testing although does not include higher level testing such as system testing. Construction is an aspect of the software development lifecycle and is integrated in the various software development process models with varying focus on construction as an activity separate from other activities. In the waterfall model, a software development effort consists of sequential phases including requirements analysis, design, and planning which are prerequisites for starting construction. In an iterative model such as scrum, evolutionary prototyping, or extreme programming, construction as an activity that occurs concurrently or overlapping other activities. Construction planning may include defining the order in which components are created and integrated, the software quality management processes, and the allocation of tasks to teams and developers. To facilitate project management, numerous construction aspects can be measured; these include the amount of code developed, modified, reused, and destroyed, code complexity, code inspection statistics, faults-fixed and faults-found rates, and effort expended. These measurements can be useful for aspects such as ensuring quality and improving the process. == Activities == Construction includes many activities. === Coding === The following are a few of the key aspects of the coding activity: Naming Choice of name for each identifier. One study showed that the effort required to debug a program is minimized when variable names are between 10 and 16 characters. Logic Organization into statements and routines Highly cohesive routines proved to be less error prone than routines with lower cohesion. A study of 450 routines found that 50 percent of the highly cohesive routines were fault free compared to only 18 percent of routines with low cohesion. Another study of a different 450 routines found that routines with the highest coupling-to-cohesion ratios had 7 times as many errors as those with the lowest coupling-to-cohesion ratios and were 20 times as costly to fix. Although studies showed inconclusive results regarding the correlation between routine sizes and the rate of errors in them, but one study found that routines with fewer than 143 lines of code were 2.4 times less expensive to fix than larger routines. Another study showed that the code needed to be changed least when routines averaged 100 to 150 lines of code. Another study found that structural complexity and amount of data in a routine were correlated with errors regardless of its size. Interfaces between routines are some of the most error-prone areas of a program. One study showed that 39 percent of all errors were errors in communication between routines. Unused parameters are correlated with an increased error rate. In one study, only 17 to 29 percent of routines with more than one unreferenced variable had no errors, compared to 46 percent in routines with no unused variables. The number of parameters of a routine should be 7 at maximum as research has found that people generally cannot keep track of more than about seven chunks of information at once. One experiment showed that designs which access arrays sequentially, rather than randomly, result in fewer variables and fewer variable references. One experiment found that loops-with-exit are more comprehensible than other kinds of loops. Regarding the level of nesting in loops and conditionals, studies have shown that programmers have difficulty comprehending more than three levels of nesting. Control flow complexity has been shown to correlate with low reliability and frequent errors. Modularity Structuring and refactoring the code into classes, packages and other structures. When considering containment, the maximum number of data members in a class shouldn't exceed 7±2. Research has shown that this number is the number of discrete items a person can remember while performing other tasks. When considering inheritance, the number of levels in the inheritance tree should be limited. Deep inheritance trees have been found to be significantly associated with increased fault rates. When considering the number of routines in a class, it should be kept as small as possible. A study on C++ programs has found an association between the number of routines and the number of faults. A study by NASA showed that the putting the code into well-factored classes can double the code reusability compared to the code developed using functional design. Error handling Encoding logic to handle both planned and unplanned errors and exceptions. Resource management Managing computational resource use via exclusion mechanisms and discipline in accessing serially reusable resources, including threads or database locks. Security Prevention of code-level security breaches such as buffer overrun and array index overflow. Optimization Optimization while avoiding premature optimization. Documentation Both embedded in the code as comments and as external documents. === Integration === Integration is about combining separately constructed parts. Concerns include planning the sequence in which components will be integrated, creating scaffolding to support interim versions of the software, determining the degree of testing and quality work performed on components before they are integrated, and determining points in the project at which interim versions are tested. === Testing === Testing can reduce the time between when faulty logic is inserted in the code and when it is detected. In some cases, testing is performed after code has been written, but in test-first programming, test cases are created before code is written. Construction includes at least two forms of testing, often performed by the developer who wrote the code: unit testing and integration testing. === Reuse === Software reuse entails more than creating and using libraries. It requires formalizing the practice of reuse by integrating reuse processes and activities into the software life cycle. The tasks related to reuse in software construction during coding and testing may include: selection of the reusable code, evaluation of code or test re-usability, reporting reuse metrics. === Quality assurance === Techniques for ensuring quality as software is constructed include: Testing One study found that the average defect detection rates of Unit testing and integration testing are 30% and 35% respectively. Software inspection With respect to software inspection, one study found that the average defect detection rate of formal code inspections is 60%. Regarding the cost of finding defects, a study found that code reading detected 80% more faults per hour than testing. Another study shown that it costs six times more to detect design defects by using testing than by using inspections. A study by IBM showed that only 3.5 hours were needed to find a defect through code inspections versus 15–25 hours through testing. Microsoft has found that it takes 3 hours to find and fix a defect by using code inspections and 12 hours to find and fix a defect by using testing. In a 700 thousand lines program, it was reported that code reviews were several times as cost-effective as testing. Studies found that inspections result in 20% - 30% fewer defects per 1000 lines of code than less formal review practices and that they increase productivity by about 20%. Formal inspections will usually take 10% - 15% of the project budget and will reduce overall project cost. Researchers found that having more than 2 - 3 reviewers on a formal inspection doesn't increase the number of defects found, although the results seem to vary depending on the kind of material being inspected. Technical review With respect to technical review, one study found that the average defect detection rates of informal code reviews and desk checking are 25% and 40% respectively. Walkthroughs were found to have a defect detection rate of 20% - 40%, but were found also to be expensive especially when project pressures increase. Code reading was found by NASA to detect 3.3 defects per hour of effort versus 1.8 defects per hour for testing. It also finds 20% - 60% more errors over the life of the project than different kinds of testing. A study of 13 reviews about review meetings, found that 90% of the defects were found in preparation for the review meeting while only around 10% were found during the meeting. Static analysis With respect to Static analysis (IEEE1028), studies have shown that a combination of these techniques needs to be used to achieve a high defect detection rate. Other studies showed that different people tend to find different defects. One study found that the extreme programming practices of pair programming, desk checking, unit testing, integration testing, and regression testing can achieve a 90% defect detection rate. An experiment involving exper

    Read more →
  • Markov blanket

    Markov blanket

    In statistics and machine learning, a Markov blanket of a random variable is a set of variables that renders the variable conditionally independent of all other variables in the system. This concept is central in probabilistic graphical models and feature selection. If a Markov blanket is minimal—meaning that no variable in it can be removed without losing this conditional independence—it is called a Markov boundary. Identifying a Markov blanket or boundary allows for efficient inference and helps isolate relevant variables for prediction or causal reasoning. The terms Markov blanket and Markov boundary were coined by Judea Pearl in 1988. A Markov blanket may be derived from the structure of a probabilistic graphical model such as a Bayesian network or Markov random field. == Definition == A Markov blanket of a random variable Y {\displaystyle Y} in a random variable set S = { X 1 , … , X n } {\displaystyle {\mathcal {S}}=\{X_{1},\ldots ,X_{n}\}} is any subset S 1 {\displaystyle {\mathcal {S}}_{1}} of S {\displaystyle {\mathcal {S}}} , conditioned on which other variables are independent with Y {\displaystyle Y} : Y ⊥ ⊥ S ∖ S 1 ∣ S 1 {\displaystyle Y\perp \!\!\!\perp {\mathcal {S}}\smallsetminus {\mathcal {S}}_{1}\mid {\mathcal {S}}_{1}} It means that S 1 {\displaystyle {\mathcal {S}}_{1}} contains at least all the information one needs to infer Y {\displaystyle Y} , where the variables in S ∖ S 1 {\displaystyle {\mathcal {S}}\smallsetminus {\mathcal {S}}_{1}} are redundant. In general, a given Markov blanket is not unique. Any set in S {\displaystyle {\mathcal {S}}} that contains a Markov blanket is also a Markov blanket itself. Specifically, S {\displaystyle {\mathcal {S}}} is a Markov blanket of Y {\displaystyle Y} in S {\displaystyle {\mathcal {S}}} . === Example === In a Bayesian network, the Markov blanket of a node consists of its parents, its children, and its children's other parents (i.e., co-parents). Knowing the values of these nodes makes the target node conditionally independent of the rest of the network. In a Markov random field, the Markov blanket of a node is simply its immediate neighbors. == Markov condition == The concept of a Markov blanket is rooted in the Markov condition, which states that in a probabilistic graphical model, each variable is conditionally independent of its non-descendants given its parents. This condition implies the existence of a minimal separating set — the Markov blanket — that shields a variable from the rest of the network. For instance, when a person holds an object stationary against gravity, the object’s acceleration is fully determined by its direct causes—namely, the upward force from the hand and the downward gravitational pull. Other variables such as air pressure or temperature are causally irrelevant. == Markov boundary == A Markov boundary of Y {\displaystyle Y} in S {\displaystyle {\mathcal {S}}} is a subset S 2 {\displaystyle {\mathcal {S}}_{2}} of S {\displaystyle {\mathcal {S}}} , such that S 2 {\displaystyle {\mathcal {S}}_{2}} itself is a Markov blanket of Y {\displaystyle Y} , but any proper subset of S 2 {\displaystyle {\mathcal {S}}_{2}} is not a Markov blanket of Y {\displaystyle Y} . In other words, a Markov boundary is a minimal Markov blanket. The Markov boundary of a node A {\displaystyle A} in a Bayesian network is the set of nodes composed of A {\displaystyle A} 's parents, A {\displaystyle A} 's children, and A {\displaystyle A} 's children's other parents. In a Markov random field, the Markov boundary for a node is the set of its neighboring nodes. In a dependency network, the Markov boundary for a node is the set of its parents. === Uniqueness of Markov boundary === The Markov boundary always exists. Under some mild conditions, the Markov boundary is unique. However, for most practical and theoretical scenarios multiple Markov boundaries may provide alternative solutions. When there are multiple Markov boundaries, quantities measuring causal effect could fail. == In cognitive science == In the study of consciousness, brain function, and complex adaptive systems, Markov blankets are proposed as a mathematical mechanism which delimits the extent of cognitive entities, whether it be physical or causal.

    Read more →
  • Receptron

    Receptron

    The receptron (short for "reservoir perceptron") is a neuromorphic data processing model — specifically neuromorphic computing — that generalizes the traditional perceptron, by incorporating non-linear interactions between inputs. Unlike classical perceptron, which rely on linearly independent weights, the receptron leverages complexity in physical substrates, such as the electric conduction properties of nanostructured materials or optical speckle fields, to perform classification tasks. The receptron bridges unconventional computing and neural network principles, enabling solutions that do not require the training approaches typical of artificial neural networks based on the perceptron model. == Algorithm == The receptron is an algorithm for supervised learning of binary classifiers, so a classification algorithm that makes its predictions based on a predictor function, combining a set of weights with the feature vector. The mathematical model is based on the sum of inputs with non-linear interactions: S = ∑ k = 1 n x j w ~ j ( x → ) | S ∈ R {\displaystyle S=\sum _{k=1}^{n}x_{j}{\widetilde {w}}_{j}({\vec {x}})|S\in R} (1) where j ∈ [ 1 , n ] {\displaystyle j\in [1,n]} and w ~ j {\displaystyle {\widetilde {w}}_{j}} are non-linear weight functions depending on the inputs, x → {\displaystyle {\vec {x}}} . Nonlinearity will typically make the system extremely complex, and allowing for the solution of problems not solvable through the simpler rules of a linear system, such as the perceptron or McCulloch Pitts neurons, which is based on the sum of linearly independent weights: S = ∑ k = 1 n x j w j p {\displaystyle S=\sum _{k=1}^{n}x_{j}w_{j}^{p}} (2) where w j {\displaystyle w_{j}} are constant real values. A consequence of this simplicity is the limitation to linearly separable functions, which necessitates multi-layer architectures and training algorithms like backpropagation As in the perceptron case, the summation in Eq. 1 origins the activation of the receptron output through the thresholding process, Y ( x 1 , . . . , x n ) = { 1 if S > th 0 if S ≤ th {\displaystyle Y(x_{1},...,x_{n})={\begin{cases}1&{\text{if }}S>{\text{th}}\\0&{\text{if }}S\leq {\text{th}}\end{cases}}} (3) where th is a constant threshold parameter. Equation 3 can be written by using the Heaviside step function. The weight functions w ~ ( x → ) {\displaystyle {\widetilde {w}}({\vec {x}})} can be written with a finite number of parameters w j 1 . . . j n {\displaystyle w_{j_{1}...j_{n}}} , simplifying the model representation. One can Taylor-expand w ~ ( x → ) {\displaystyle {\widetilde {w}}({\vec {x}})} and use the idempotency of Boolean variables ( x j ) q = x j ∀ q ≥ 1 {\displaystyle (x_{j})^{q}=x_{j}\forall q\geq 1} such that S ′ = b + ∑ k = 1 n x j w ~ j ( x → ) {\displaystyle S'=b+\sum _{k=1}^{n}x_{j}{\widetilde {w}}_{j}({\vec {x}})} can be written as S ′ ( x → ) = b + ∑ j w j x j + ∑ j < k w j k x j x k + ∑ j < k < l w j k l x j x k x l + . . . {\displaystyle S'({\vec {x}})=b+\sum _{j}w_{j}x_{j}+\sum _{j Read more →