AI Code Breaker

AI Code Breaker — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Carrier cloud

In cloud computing, a carrier cloud is a class of cloud that integrates wide area networks (WAN) and other attributes of communications service providers’ carrier-grade networks to enable the deployment of highly-complex applications in the cloud. In contrast, classic cloud computing focuses on the data center and does not address the network connecting data centers and cloud users. This may result in unpredictable response times and security issues when business-critical data are transferred over the Internet. == History == The advent of virtualization technology, cost-effective computing hardware, and ubiquitous Internet connectivity have enabled the first wave of cloud services starting in the early years of the 21st century. But many businesses and other organizations hesitated to move to more demanding applications, from on-premises dedicated hardware to private or public clouds. As a response, communications service providers started in the 2010/2011 time frame to develop carrier clouds that address perceived weaknesses in existing cloud services. Cited weaknesses vary but often include possible downtime, security issues, high cost of custom software and data transfer, inflexibility of some cloud apps, poor customer and nonfulfillment of service level agreements (SLAs). == Characteristics == To enable the deployment of time-sensitive and business critical applications in the cloud, the carrier cloud is designed to match or even exceed the characteristics of on-premises deployments. Therefore, the carrier cloud is characterized by some or all of the following items: Configurable, elastic network performance: Typical cloud computing solutions use the best effort of the public Internet to connect cloud users and data centers. This approach provides instant connectivity but does not offer control over network capacities, latencies, and jitter. Carrier clouds address these gaps with content delivery networks and/or dedicated virtual private networks (VPN) at OSI layers 1 (optical wavelengths), 2 (data link layer), and 3 (network layer). These VPNs can be configured to offer the desired performance parameters and exhibit the same type of elasticity for the network that regular clouds provide for servers and storage. To achieve the requested performance parameters, such as low latency, cloud applications can be (automatically) allocated to distributed data centers that are close enough to the cloud users. Automatic resource placement: For a cloud with multiple data centers, information about both the data center and the connecting network is relevant for a decision of where to place cloud images and storage volumes. For this decision, carrier clouds can obtain relevant information about the network, e.g., using the Application-Layer Traffic Optimization (ALTO) protocol. High level of security and governance: Cloud application providers are subject to general and domain specific security, privacy, and governance requirements and regulations, such as the European Data Protection Directive and the U.S. Health Insurance Portability and Accountability Act. For added security, the wide area network of the carrier cloud can provide segregated encrypted or unencrypted network links that are not accessible from the general Internet. At the data center, the carrier cloud provides e.g. virtual private servers, management processes, logs, and documentation to fulfill security and governance rules. Location control: Fundamentally, cloud users should not be concerned with the geographic location of their cloud resources. However, privacy and other regulations may mandate that certain types of data must not be sent outside a national jurisdiction or other geographical region. Open APIs: Carrier clouds provide graphical user interfaces and Web application programming interfaces that allow cloud application providers to set up, manage, and monitor both, the data center and the WAN, of their cloud services. == Architecture == Carrier clouds encompass data centers at different network tiers and wide area networks that connect multiple data centers to each other as well as to the cloud users. Links between data centers are used for failover, overflow, backup, and geographic diversity. Carrier clouds can be set up as public, private, or hybrid clouds. The carrier cloud federates these cloud entities by using a single management system to orchestrate, manage, and monitor data center and network resources as a single system.
Read more →
Face Swap Live

Face Swap Live is a mobile app created by Laan Labs that enables users to swap faces with another person in real-time using the device's camera. It was released on December 14, 2015. In addition to swapping faces with another person, the app enables users to create videos using a set of bundled live filters. The app is available on iOS and Android devices. Face Swap Live was named Apple's #2 best-selling paid app in 2016.
Read more →
Scientific Working Group – Imaging Technology

The Scientific Working Group on Imaging Technology was convened by the Federal Bureau of Investigation in 1997 to provide guidance to law enforcement agencies and others in the criminal justice system regarding the best practices for photography, videography, and video and image analysis. This group was terminated in 2015. == History == As technology has advanced through the years, law enforcement has needed to stay abreast of emerging technological advances and use these in the investigation of crime. A factor that is considered when new technology is used in these investigations is the determination of whether the use of that new technology will be admissible in court. The judicial system in the United States currently has two standards used in the determination of admissibility of testimony regarding scientific evidence; the Daubert Standard and the Frye Standard. These standards guide the courts in the admissibility of testimony derived from the use of new technologies and scientific techniques. The Federal Bureau of Investigation (FBI), seeking to address possible admissibility issues with such testimony, established Scientific Working Groups starting with the Scientific Working Group on DNA Analysis and Methods (SWGDAM) in 1988. The goal of these groups is to open lines of communication between law enforcement agencies and forensic laboratories around the world while providing guidance on the use of new and innovative technologies and techniques. This guidance can lead to admissibility of evidence and/or testimony, provided proper methods in the collection of evidence and its analysis are employed. In 2009, the National Academy of Sciences released a report entitled, "Strengthening Forensic Science in the United States: A Path Forward." This report addresses many topics including challenges and disparities facing the forensic science community, standardization, certification of practitioners and accreditation of their respective entities, problems related to the interpretation of forensic evidence, the need for research, and the admission of forensic science evidence in litigation. This report mentions the Scientific Working Groups and their role in forensic science. The history of imaging technology (photography) can be said to extend back to the times of Chinese philosopher Mo-Ti (470-390 B.C.) who described the principles behind the precursor to the camera obscura. Since that time, advances in imaging technology include the discovery of chemical photographic processes in the 19th century and the use of electronic imaging technology that includes analog video cameras and digital video and still cameras. By the mid 1990s, it was apparent that technologically advanced camera systems such as these were being adopted for use in the criminal justice system. This led the FBI to convene a meeting of individuals working in the field of forensic imaging from federal, state, local, and foreign law enforcement, and the U.S. military, during the summer of 1997. As a result of this meeting, the Technical Working Group on Imaging Technology was formed from a core group of the meeting’s participants. This group later became the Scientific Working Group on Imaging Technology (SWGIT). Prior to the inception of SWGIT, some law enforcement agencies began adopting digital imaging technology. Due to the lack of guidelines or standards, some of these agencies attempted to replace all their film cameras with substandard digital cameras, only to find that the equipment they had purchased was not capable of accomplishing the mission for which they were intended. At that time only low resolution digital cameras were deemed affordable by some law enforcement agencies. Some of these agencies were forced to rethink their photography procedures and reverted to the use of film cameras or replaced their low-resolution digital cameras with higher quality, more expensive equipment. Also lacking at this early stage was guidance on how to store and archive digital image files. When SWGIT was formed, it was tasked with providing guidance to law enforcement and others in the criminal justice system by releasing documents that describe the best practices and guidelines for the use of imaging technology, to include these concerns and many others. This group was terminated in 2015. == SWGIT Function == During its existence, SWGIT provided information on the appropriate use of various imaging technologies including both established and new. This was accomplished through the release of documents such as the SWGIT Best Practices documents. As changes in technology occurred, these documents were updated. Over the course of its existence, SWGIT collaborated with other Scientific Working Groups to address imaging concerns within their respective disciplines. SWGIT published over 20 documents that dealt specifically with imaging technology. SWGIT also co-published documents with the Scientific Working Group on Digital Evidence (SWGDE) that had a component or components dealing with imaging technology. SWGIT also provided imaging technology guidance and input for documents from the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group for Forensic Document Examination (SWGDOC), and the Scientific Working Group on Shoeprint and Tire Tread Evidence (SWGTREAD). SWGIT assisted the American Society of Crime Lab Directors/Laboratory Accreditation Board (ASCLD/LAB) in the writing of definitions and standards for the accreditation of Digital and Multimedia Evidence sections of crime laboratories. In addition to releasing documents, SWGIT members disseminated best practices for law enforcement professionals where imaging technology was concerned. This was carried out by attending and lecturing at meetings and conferences of various forensic organizations that included: The American Academy of Forensic Sciences (AAFS) The International Association for Identification (IAI) The Law Enforcement and Emergency Services Video Association (LEVA) The American Society of Crime Lab Directors (ASCLD) The SWGIT membership consisted of approximately fifty scientists, photographers, instructors, and managers from more than two dozen federal, state, and local law enforcement agencies, as well as from the academic and research communities. The membership elected its officers from within. SWGIT was composed of the Executive Committee, four standing subcommittees, and ad hoc subcommittees appointed on an as-needed basis. The standing subcommittees were: Image Analysis, Forensic Photography, Video, and Outreach. This group was terminated in 2015. == Legal Proceedings == The following court cases have conducted Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579 (1993) hearings in which SWGIT best practice documents have been cited as accepted protocol, methodology, and as generally accepted techniques in the forensic community: U. S. v. Rudy Frabizio, U.S. District Court, Boston, MA, 2008 (Image Authentication) U.S. v. Nobumochi Furukawa, U.S. District Court, Minnesota, 2007 (Video Authentication) U.S. v. John Stroman, U.S. District Court, South Carolina, 2007 (Facial Comparison Analysis) State of Texas v. Daniel Day, Tarrant County Texas, 2005 (Camera Identification to Images) U.S. v. Marc Watzman, U.S. District Court, Northern Illinois, 2004 (Video Authentication) U.S. v. McKreith, U.S. District Court, Fort Lauderdale, FL, 2002 (Photo comparison of shirt) == Termination == This group was unfunded by the FBI in 2015.
Read more →
Aldus PhotoStyler

Aldus PhotoStyler was a graphics software program developed by the Taiwanese company Ulead. Released in June 1991 as the first 24 bit image editor for Windows, it was bought the same year by the Aldus Prepress group. Its main competition was Adobe Photoshop. Version 2.0 (late 1993) introduced a new user interface and improved color calibration. PhotoStyler SE - lacking some features of the version 2.0 - was bundled with scanners like HP ScanJet. The product disappeared from the Adobe product line after Adobe acquired Aldus in 1994.
Read more →
Underwater computer vision

Underwater computer vision is a subfield of computer vision. In recent years, with the development of underwater vehicles ( ROV, AUV, gliders), the need to be able to record and process huge amounts of information has become increasingly important. Applications range from inspection of underwater structures for the offshore industry to the identification and counting of fishes for biological research. However, no matter how big the impact of this technology can be to industry and research, it still is in a very early stage of development compared to traditional computer vision. One reason for this is that, the moment the camera goes into the water, a whole new set of challenges appear. On one hand, cameras have to be made waterproof, marine corrosion deteriorates materials quickly and access and modifications to experimental setups are costly, both in time and resources. On the other hand, the physical properties of the water make light behave differently, changing the appearance of a same object with variations of depth, organic material, currents, temperature etc. == Applications == Seafloor survey Vehicle navigation and positioning Biological monitoring {possibly aquatic biomonitoring) Video mosaics as visual navigation maps Submarine pipeline inspection Wreckage visualization Maintenance of underwater structures Drowning detection systems == Medium differences == === Illumination === In air, light comes from the whole hemisphere on cloudy days, and is dominated by the sun. In water direct lighting comes from a cone about 96° wide above the scene. This phenomenon is called Snell's window. Artificial lighting can be used where natural light levels are insufficient and where the light path is too long to produce acceptable colour, as the loss of colour is a function of the total distance through water from the source to the camera lens port. === Light attenuation === Unlike air, water attenuates light exponentially. This results in hazy images with very low contrast. The main reasons for light attenuation are light absorption (where energy is removed from the light) and light scattering, by which the direction of light is changed. Light scattering can further be divided into forward scattering, which results in an increased blurriness and backward scattering that limits the contrast and is responsible for the characteristic veil of underwater images. Both scattering and attenuation are heavily influenced by the amount of organic matter dissolved or suspended in the water. Light attenuation in water is also a function of the wavelength. This means that different colours are attenuated at different rates, leading to colour degradation.with depth and distance. Red and orange light are attenuated faster, followed by yellows and greens. Blue is the least attenuated visible wavelength. === Artificial lighting === == Challenges == In high level computer vision, human structures are frequently used as image features for image matching in different applications. However, the sea bottom lacks such features, making it hard to find correspondences in two images. In order to be able to use a camera in the water, a watertight housing is required. However, refraction will happen at the water-glass and glass-air interface due to differences in density of the materials. This has the effect of introducing a non-linear image deformation. The motion of the vehicle presents another special challenge. Underwater vehicles are constantly moving due to currents and other phenomena. This introduces another uncertainty to algorithms, where small motions may appear in all directions. This can be specially important for video tracking. In order to reduce this problem image stabilization algorithms may be applied. == Relevant technology == === Image restoration === Image restoration< techniques are intended to model the degradation process and then invert it, obtaining the new image after solving. It is generally a complex approach that requires plenty of parameters that vary a lot between different water conditions. === Image enhancement === Image enhancement only tries to provide a visually more appealing image without taking the physical image formation process into account. These methods are usually simpler and less computational intensive. === Color correction === Various algorithms exist that perform automatic color correction. The UCM (Unsupervised Color Correction Method), for example, does this in the following steps: It firstly reduces the color cast by equalizing the color values. Then it enhances contrast by stretching the red histogram towards the maximum and finally saturation and intensity components are optimized. == Underwater stereo vision == It is usually assumed that stereo cameras have been calibrated previously, geometrically and radiometrically. This leads to the assumption that corresponding pixels should have the same color. However this can not be guaranteed in an underwater scene, because of dispersion and backscatter. However, it is possible to digitally model this phenomenon and create a virtual image with those effects removed == Other application fields == Imaging sonars have become more and more accessible and gained resolution, delivering better images. Sidescan sonars are used to produce complete maps of regions of the sea floor stitching together sequences of sonar images. However, sonar images often lack proper contrast and are degraded by artefacts and distortions due to noise, attitude changes of the AUV/ROV carrying the sonar or non uniform beam patterns. Another common problem with sonar computer vision is the comparatively low frame rate of sonar images.
Read more →
Prism Video Converter

Prism is a multi-format video converter developed by NCH Software for Windows and Mac OS. It offers converting tools for instant media conversions. Prism Video Converter can handle large and high-quality resolution media files. It provides built-in compressor and adjuster settings, allowing users to customize and optimize their videos according to their needs. The software also includes features such as previewing videos and adding effects. Prism offers a free version for non-commercial use as well as a premium version. == Features == Prism Video File Converter supports a wide range of file formats. It enables users to convert videos into formats like AVI, ASF, WMV, MP4, 3GP, etc. It offers the ability to convert DVDs into various formats. It provides tools for adjusting colour and filter options. Prism Video File Converter provides several customizable options for tweaking the output files during the conversion process. Users can adjust compression/encoder rates, set the resolution and frame rate, and specify the desired output file size. The software also offers various effects like video rotation, captions, watermarks, and text overlay. It also includes a built-in preview feature, that enables users to view their videos before and after the conversion process. It supports batch conversion and running conversion in background. == Controversy == Previously, Prism and certain other NCH Software products were bundled with optional browser plugins, including the Google Chrome toolbar and the Conduit toolbar. This resulted in user complaints and raised concerns from antivirus software companies like Norton and McAfee, which flagged them as potential malware. NCH Software has since removed all toolbars, browsers, and third-party app offerings in all Prism versions.
Read more →
Masking (art)

In art, craft, and engineering, masking is the use of materials to protect areas from change, or to focus change on other areas. This can describe either the techniques and materials used to control the development of a work of art by protecting a desired area from change; or a phenomenon that (either intentionally or unintentionally) causes a sensation to be concealed from conscious attention. The term is derived from the word mask, in the sense that it hides the face from view. == In painting == Masking materials supplement a painter's dexterity and choice of applicator to control where paint is laid. Examples include the use of a stencil or masking tape to protect areas which are not to be painted. === Solid masks === Most solid masks require an adhesive to hold the mask in place while work is performed. Some, such as masking tape and frisket, come with adhesive pre-applied. Solid masks are readily available in bulk, and are used in large painting jobs. Paper products Kraft paper Butcher paper Masking tape Plastic film Frisket Polyester tape Stencils Silk screen === Liquid masks === Liquid masks are preferred where precision is needed; they prevent paint from seeping underneath, resulting in clean edges. Care must be taken to remove them without damaging the work underneath. Latex or other polymers Molten wax Gesso, typically a substrate for painting, but can also be applied to achieve masking effects == In photography == Masks used for photography are used to enhance the quality of an image. Representations of a scene—whether film, video display, or printed—do not have the dynamic contrast range available to the human eye looking directly at the same scene. Adjusting the contrast in an image helps restore some of the perceived qualities of the original scene. These adjustments are typically performed on "blown-out" highlights, and "crushed" or "muddy" shadow areas, where clipping has occurred; or on desaturated colors. Photographic masks are peculiar in that they are produced from the image they will alter, an exercise in recursion. Masks used to produce other effects are similar to those used in painting. === Controlling exposure === ==== Film ==== The basic methods of controlling exposure are dodging and burning, which respectively lighten (reduce exposure) and darken (increase exposure) areas of an image. The tools a film photographer uses range from shaped pieces of black material (such as studio foil, foam, and paper) to the photographer's hands. To create a photographic mask, a sheet of negative film is contact-exposed to the original film negative or slide positive in a particular way. Both films are then combined to produce a processed positive. The process is similar when applied using digital techniques: the inverse of the working image is reduced to an image mask; filters or other adjustments are then applied, using the mask to selectively block portions of the image. ==== Digital ==== Image editors offer at the very least a "Select All" command and a rectangular "marquee" selection tool. (The word "marquee" describes the "crawling ants" border used to highlight the active region.) Once a selection is created, further changes to the image will be confined to that area. To continue editing the rest of the image, the selection is either "deselected" or the entire image is selected. Advanced suites offer more ways to select portions of an image, as well as ways to combine these selections through. Selection masks can be switched between an editable greyscale image and a mask. They allow the user to create a mask using the suite's painting tools. === Contrast masking === When the contrast range of an image needs to be adjusted, a contrast mask is a simple solution. The processed image resembles what would be achieved when exposing through a neutral density filter, but the effects are focused highly upon the extreme regions of the image. The blocking areas of the mask coincide with the highlights of the image, and the permissive areas with the shadows, resulting in more detail appearing in each. ==== Film ==== The mask is often made from high-quality black-and-white film, such as Kodak Technical Pan, which allows for a degree of softening on the mask. Its processing time is reduced so as to not completely oppose the original negative. Both negatives are combined and registered, and collectively exposed with additional time to compensate for the presence of the mask. ==== Digital ==== Contrast masking is made simpler with digital editing. A grayscale version of the image is produced, either by desaturation or by calculating selected ratios of the image's color channels, inverted, and blurred. The mask and original image are blended together to produce the final processed image. Some image editors allow for refinement of the effect by changing the strength of the blend. Contrast masking can be considered to be the opposite of gamma correction, which adjusts the midtones of an image. Effects similar to contrast masking can be achieved by adjusting the response curves of an image. === Unsharp masking === A derivative of contrast masking is unsharp masking, an unusual term for a process intended to increase the apparent sharpness (acutance) of an image. Unsharp masking uses a blurred form of the image to increase contrast along regions of moderate contrast difference. Around edges, the blur region causes highlights to overexpose and shadows to underexpose. Taken to an extreme, the edges become overly visible and detract from the quality of the image—this is referred to as halation. Unsharp masking does not increase the actual sharpness, as it cannot recover details lost to blurring. ==== Film ==== Unsharp masking allows the photographer to sharpen areas that have become blurred in the original negative, due to long shutter speed/exposure time, or from using a wide aperture/"fast" lens. When creating the unsharp mask, extra space or diffusing material is added between the image and the mask to produce the necessary blur. ==== Digital ==== Unsharp masking has become automated in digital editing, with higher-end suites offering the process as a "tool" or "filter" in their standard sharpening kits—the actual creation of a mask is bypassed in favor of calculations that represent the mask's effect. The process depends on three factors: the radius of the blur, the strength of the effect, and the threshold degree of contrast above which the effect will be applied. (Adjusting the threshold allows the editor to apply the effect selectively upon moderately defined edges and ignore image noise.) Unsharp masking is computationally more complex than other sharpening algorithms, but results in a higher-quality remedy. Deconvolution allows for truer sharpening, but is much more complex than unsharp masking.
Read more →
Google Tasks

Google Tasks is a task management application developed by Google and included with Google Workspace. Included initially as a feature in Gmail and Google Calendar, Google Tasks launched as a core product with a standalone app in 2018. It is available for Android and iOS, as well as in the right-hand side panel on Google Workspace apps on the web and in Google Calendar. == History and development == Google Tasks began as an integration within other apps in G Suite (now Google Workspace), allowing to-do items to be created in Calendar and Gmail. Upon graduating to a core service on June 28, 2018, Google Tasks launched as a dedicated mobile app in which tasks can be sorted into lists, managed, and completed. Google Tasks launched the ability to create tasks from Google Chat messages in 2022.
Read more →
Computational heuristic intelligence

Computational heuristic intelligence (CHI) refers to specialized programming techniques in computational intelligence (also called artificial intelligence, or AI). These techniques have the express goal of avoiding complexity issues, also called NP-hard problems, by using human-like techniques. They are best summarized as the use of exemplar-based methods (heuristics), rather than rule-based methods (algorithms). Hence the term is distinct from the more conventional computational algorithmic intelligence, or symbolic AI. An example of a CHI technique is the encoding specificity principle of Tulving and Thompson. In general, CHI principles are problem solving techniques used by people, rather than programmed into machines. It is by drawing attention to this key distinction that the use of this term is justified in a field already replete with confusing neologisms. Note that the legal systems of all modern human societies employ both heuristics (generalisations of cases) from individual trial records as well as legislated statutes (rules) as regulatory guides. Another recent approach to the avoidance of complexity issues is to employ feedback control rather than feedforward modeling as a problem-solving paradigm. This approach has been called computational cybernetics, because (a) the term 'computational' is associated with conventional computer programming techniques which represent a strategic, compiled, or feedforward model of the problem, and (b) the term 'cybernetic' is associated with conventional system operation techniques which represent a tactical, interpreted, or feedback model of the problem. Of course, real programs and real problems both contain both feedforward and feedback components. A real example which illustrates this point is that of human cognition, which clearly involves both perceptual (bottom-up, feedback, sensor-oriented) and conceptual (top-down, feedforward, motor-oriented) information flows and hierarchies. The AI engineer must choose between mathematical and cybernetic problem solution and machine design paradigms. This is not a coding (program language) issue, but relates to understanding the relationship between the declarative and procedural programming paradigms. The vast majority of STEM professionals never get the opportunity to design or implement pure cybernetic solutions. When pushed, most responders will dismiss the importance of any difference by saying that all code can be reduced to a mathematical model anyway. Unfortunately, not only is this belief false, it fails most spectacularly in many AI scenarios. Mathematical models are not time agnostic, but by their very nature are pre-computed, i.e. feedforward. Dyer [2012] and Feldman [2004] have independently investigated the simplest of all somatic governance paradigms, namely control of a simple jointed limb by a single flexor muscle. They found that it is impossible to determine forces from limb positions- therefore, the problem cannot have a pre-computed (feedforward) mathematical solution. Instead, a top-down command bias signal changes the threshold feedback level in the sensorimotor loop, e.g. the loop formed by the afferent and efferent nerves, thus changing the so-called ‘equilibrium point’ of the flexor muscle/ elbow joint system. An overview of the arrangement reveals that global postures and limb position are commanded in feedforward terms, using global displacements (common coding), with the forces needed being computed locally by feedback loops. This method of sensorimotor unit governance, which is based upon what Anatol Feldman calls the ‘equilibrium Point’ theory, is formally equivalent to a servomechanism such as a car's ‘cruise control’.
Read more →
Oculus Medium

Oculus Medium is a digital sculpting software that works with virtual reality headsets and 6DoF motion controllers. It is used to create and paint digital sculptures. Medium works only on Oculus Rift. It was released on December 5, 2016, following with a major update in 2018 introducing new features and a revamped UI. On December 9, 2019, Oculus Medium was acquired by Adobe and re-named to "Medium by Adobe".
Read more →
Automatic scorer

An automatic scorer is the computerized scoring system to keep track of scoring in ten-pin bowling. It was introduced en masse in bowling alleys in the 1970s and combined with mechanical pinsetters to detect overturned pins. By eliminating the need for manual score-keeping, these systems have introduced new bowlers into the game who otherwise would not participate because they had to count the score themselves, as many do not understand the mathematical formula involved in bowler scoring. At first, people were skeptical about whether a computer could keep an accurate score. In the twenty-first century, automatic scorers are used in most bowling centers around the world. The three manufacturers of these specialty computers have been Brunswick Bowling, AMF Bowling (later QubicaAMF), and RCA. == History == Automatic equipment is considered a cornerstone of the modern bowling center. The traditional bowling center of the early 20th century was advanced in automation when the pinsetter person ("pin boy"), who set back up by hand the bowled down pins, was replaced by a machine that automatically replaced the pins in their proper play positions. This machine came out in the 1950s. A detection system was developed from the pinsetter mechanism in the 1960s that could tell which pins had been knocked down, and that information could be transferred to a digital computer. Automatic electronic scoring was first conceived by Robert Reynolds, who was described by a newspaper story at the time as "a West Coast electronics calculator expert." He worked with the technical staff of Brunswick Bowling to develop it. The goal was realized in the late 1960s when a specialized computer was designed for the purpose of automatic scorekeeping for bowling. The field test for the automatic scorer took place at Village Lanes bowling center, Chicago in 1967. The scoring machine received approval for official use by the American Bowling Congress in August of that year. They were first used in national official league gaming on October 10, 1967. In November, Brunswick announced that they were accepting orders for the new digital computer, which cost around $3,000 per bowling lane. Bowling centers that installed these new automatic scoring devices in the 1970s charged a ten cents extra per line of scoring for the convenience. == Description == Each Automatic Scorer computer unit kept score for four lanes. It had two bowler identification panels serving two lanes each. The bowler pushed it into his named position when his turn came up so the computer knew who was bowling and score accordingly. After the bowler rolled the bowling ball down the lane and knocked down pins, the pinsetter detected which pins were down and relayed this information back to the computer for scoring. The result was then printed on a scoresheet and projected overhead onto a large screen for all to see. The Automatic Scorer digital computer was mathematically accurate, however the detection system at the pinsetter mechanism sometimes reported the wrong number of pins knocked down. The computer could be corrected manually for any errors in the system; similarly, human errors, such as neglecting to move the bowler identification mechanism, could be corrected for by manual action. The scorer could take into account bowlers' handicaps and could adjust for late-arriving bowlers. The automatic scorer is directly connected to the foul detection unit. As a result, foul line violations are automatically scored. Brunswick had put ten years of research and development into the Automatic Scorer, and by 1972 there were over 500 of these computers installed in bowling centers around the world. AMF Bowling, competitor to Brunswick, entered into the automatic scorer computer field during the 1970s and their systems were installed into their brand of bowling centers. By 1974, RCA was also making these computers for automatic scoring. == Reception and further developments == The purposes of the computerized scoring were to avoid errors by human scorers and to prevent cheating. It had the side benefit of speeding up the progress of the game and introducing new bowlers to the game. Score-keeping for bowling is based on a formula that many new to bowling were not familiar with and thought difficult to learn. These casual bowlers unfamiliar with the formula thought the scores given by the computers were confusing. Some bowlers were not comfortable with automatic scorers when they were introduced in the 1970s, so kept score using the traditional method on paper score sheets. The introduction of this device increased the popularity of the sport. Automatic scorers came to be considered a normal part of modern bowling installations worldwide, with owners and managers saying that bowlers expect such equipment to be present in bowling establishments and that business increased following their introduction. Brunswick introduced a color television style automatic scorer in 1983. Bowling center owners could use these style automatic scorers for advertising, management, videos, and live television. By the 2010s, these types of electronic visual displays could show bowler avatars and social media connections to publicize the bowlers' scores. Some are capable of being extended entertainment systems of games for children and adults. Some scoring systems support variations on traditional bowling, such as different kinds of bingo games where certain pins have to be knocked down at certain times or practice regimes where certain spares have to be accomplished. By this point, QubicaAMF Worldwide, an outgrowth of AMF, was one of the leading providers of bowling scoring equipment.
Read more →
ViEWER

ViEWER, the Virtual Environment Workbench for Education and Research, is a proprietary, freeware computer program for Microsoft Windows written by researchers at the University of Idaho for the study of visual perception and complex immersive three-dimensional environments. It was created using C++ and OpenGL, and has been used by Dr. Brian Dyre, Dr. Steffen Werner, Dr. Ernesto Bustamante, Dr. Ben Barton, and their undergraduate and graduate researchers in visual perception, signal detection, and child-safety experiments.
Read more →
IRows

iRows was a web-based spreadsheet in beta with a GUI similar to the traditional desktop-based spreadsheet applications, such as Microsoft Excel and OpenOffice.org. It was shut down on December 31, 2006, after it was announced that its two founders had been hired by Google. iRows used Ajax and XML. It was described as an example of a Web 2.0 system. iRows supported conventional spreadsheet features functions, value formatting and charts and added web oriented spreadsheet capabilities like collaboration (multiple people using a shared spreadsheet, sending a spreadsheet as a link instead of an attachment and ability to publish spreadsheets on other web pages (e.g. blogs).
Read more →
Image subtraction

Image subtraction or pixel subtraction or difference imaging is an image processing technique whereby the digital numeric value of one pixel or whole image is subtracted from another image, and a new image generated from the result. This is primarily done for one of two reasons – levelling uneven sections of an image such as half an image having a shadow on it, or detecting changes between two images. This method can show things in the image that have changed position, brightness, color, or shape. For this technique to work, the two images must first be spatially aligned to match features between them, and their photometric values and point spread functions must be made compatible, either by careful calibration, or by post-processing (using color mapping). The complexity of the pre-processing needed before differencing varies with the type of image, but is essential to ensure good subtraction of static features. This is commonly used in fields such as time-domain astronomy (known primarily as difference imaging) to find objects that fluctuate in brightness or move. In automated searches for asteroids or Kuiper belt objects, the target moves and will be in one place in one image, and in another place in a reference image made an hour or day later. Thus, image processing algorithms can make the fixed stars in the background disappear, leaving only the target. Distinct families of astronomical image subtraction techniques have emerged, operating in both image space or frequency space, with distinct trade-offs in both quality of subtraction and computational cost. These algorithms lie at the heart of almost all modern (and upcoming) transient surveys, and can enable the detection of even faint supernovae embedded in bright galaxies. Nevertheless, in astronomical imaging, significant 'residuals' remain around bright, complex sources, necessitating further algorithmic steps to identify candidates (known as real-bogus classification) The Hutchinson metric can be used to "measure of the discrepancy between two images for use in fractal image processing".
Read more →
VEX Robotics

VEX Robotics is one of the main robotics programs for elementary through university students, and a subset of Innovation First International. The VEX Robotics competitions and programs were overseen by the Robotics Education & Competition Foundation (RECF), until May 2026 when VEX split from the foundation. VEX Robotics Competition was named the largest robotics competition in the world by Guinness World Records. There are four leagues of VEX Robotics competitions designed for different age groups and skill levels: VEX V5 Robotics Competition (previously VEX EDR, VRC) is for middle and high school students, and is the largest competition out of the four. VEX Robotics teams have an opportunity to compete annually in the VEX V5 Robotics Competition (V5RC). VEX IQ Robotics Competition is for elementary and middle school students. VEX IQ robotics teams have an opportunity to compete annually in the VEX IQ Robotics Competition (VIQRC). VEX AI is a 'spinoff' of VEX U, for high school and college level students. The competition features no driver control periods, hence the name 'VEX AI'. VEX AI robotics teams have an opportunity to compete in the VEX AI Competition (VAIC). VEX U is a robotics competition for college and university students. The game is similar to V5RC, but traditionally with separate, more relaxed rules on the construction of their robots. In each of the four leagues, students are given a new challenge annually and must design, build, program, and drive a robot to complete the challenge as best they can. The robotics teams that consistently display exceptional mastery in all of these areas will eventually progress to the VEX Robotics World Championship. The description and rules for the season's competition are released during the world championship of the previous season. From 2021 to 2025, the VEX Robotics World Championship was held in Dallas, Texas each year in mid-April or mid-May, depending on which league the teams are competing in. St. Louis, Missouri will host the event in 2026 and 2027. == VEX V5 == VEX V5 is a STEM learning system designed by VEX Robotics and the REC Foundation to help middle and high school students develop problem-solving and computational thinking skills. It was introduced at the VEX Robotics World Championship in April 2019 as a replacement for a previous system called VEX EDR (VEX Cortex). The program utilizes the VEX V5 Construction and Control System as a standardized hardware, firmware, and software compatibility platform. Robotics teams and clubs can use the VEX V5 system to build robots to compete in the annual VEX V5 Robotics Competition. === Construction and Control System === The VEX V5 Construction and Control System is a metal-based robotics platform with machinable, bolt-together pieces that can be used to construct custom robotic mechanisms. The robot is controlled by a programmable processor known as the VEX V5 Brain. The Brain is equipped with a color LCD touchscreen, 21 hardware ports, an SD card port, a battery port, 8 legacy sensor ports, and a micro-USB programming port. Usage with a VEX V5 Radio enables wireless driving and wireless programming of the brain via the VEX V5 Controller. The controller allows wireless user input to the robot brain, and two controllers can be daisy-chained if necessary. Each controller has two hardware ports, a micro-USB port, two 2-axis joysticks, a monochrome LCD, and twelve buttons. The controller's LCD can be written wirelessly from the robot, providing users with configurable feedback from the robot brain. The VEX V5 Motors connect to the brain via the hardware ports and are equipped with an internal optical shaft encoder to provide feedback on the rotational status of the motor. The motor's speed is programmable but may also be altered by exchanging the internal gear cartridge with one of three cartridges of different gear ratios. The three cartridges are 100 rpm, 200 rpm, and 600 rpm. === VEXcode V5 === VEXcode V5 is a Scratch-based coding environment designed by VEX Robotics for programming VEX Robotics hardware, such as the VEX V5 Brain. The block-style interface makes programming simple for elementary through high-school students. VEXcode is consistent across VEX 123, GO, IQ, and V5 and can be used to program the devices from each. VEXcode allows the block programs to be viewed as equivalent C++ or programs to help more advanced students transition from blocks to text. This also allows easy interconversion between text-based and block-based programming. VEXcode also lets students code in C++, which gives the opportunity to learn basic C++, but to collect data from sensors or to move the drivetrain, VEX uses a header file. === PROS === PROS is a C/C++ programming environment for VEX V5 hardware maintained by students of Purdue University through Purdue ACM SIGBots. It provides a more bare-bones environment for more knowledgeable students that allows for an industry-applicable experience. It has a more robust API that allows for more precise control of the hardware for competition-level uses in VRC/VEX U. It is based on FreeRTOS. == VEX V5 Robotics Competition == VEX V5 Robotics Competition (V5RC) is a robotics competition for registered middle and high school teams that utilize the VEX V5 Construction and Control System. In this competition, teams design, cad, build, and program robots to compete at tournaments. At tournaments, teams participate in qualifying matches where two randomly chosen alliances of two teams each compete for the highest team ranking. Before the Elimination Rounds, the top-ranking teams choose their permanent alliance partners, starting with the highest-ranked team, and continuing until the alliance capacity for the tournament is reached. The new alliances then compete in an elimination bracket, and the tournament champions, alongside other award winners, qualify for their regional culminating event. . The current challenge is VEX V5 Robotics Competition: Override. === General rules === Middle and high school students have the same game and rules. The most general and basic rules for the VEX V5 Robotics Competition are as follows, but each year may have exceptions and/or additional constraints. Each robot is partnered with another robot in a pair called an "alliance". In any given match, each alliance competes against one other alliance. One team is designated as the red alliance, and the other as the blue alliance. No robot may exceed the dimensions of an 18-inch cube until the match has begun. No robot may contain hardware, software, material, or content that is not distributed by or explicitly allowed by VEX Robotics. The playing field consists of a 12-foot by 12-foot square of foam tiles bordered by a wall of metal-framed polycarbonate dividers. Anything outside of these border walls is considered as off of the playing field. The various field elements associated with that season's competition are arranged in a defined and reproducible manner before the start of each match. At the start of the match is a 15-second 'autonomous' period, where all four robots navigate the field based on pre-programmed instructions without driver input. After the autonomous period has ended, the 'driver control' period begins. This stage of the match consists of one minute and forty-five seconds of manual control of the robot using one or two handheld controllers utilized by the respective number of 'drivers'. The object of the match is to attain a higher score, i.e. more points, than the opposing alliance. The method by which the alliances attain these points varies significantly with each season. Throughout the match, the blue alliance is not allowed to enter the red alliance's 'protected zone' of the field, and vice versa. The designated areas of the field are often different for each season. During the autonomous period, the protected zone normally consists of half of the field where the alliance starts, whereas the driver control period rarely features a defined protected zone, as was the case for VRC Tipping Point, VRC High Stakes, and VRC Push Back. Intentionally removing game objects from the field will result in a warning, minor violation, and/or major violation (disqualification). Intentionally and repeatedly damaging any of the robots involved, either during the match or otherwise, will result in immediate disqualification. === 2025-2026 Game: Push Back === The objective of the game is to score as many blocks as possible in goals within a 15-second autonomous period, and 1:45 driver control period. Each field consists of two long goals, two center goals, four loaders, and two park zones. ==== Field Element - Goals ==== The goals may be pictured as 'bridges' above the field. Long goals can fit fifteen blocks of any color, while center goals can fit seven. Goals feature control bonuses that are always awarded to the alliance with the most blocks scored in the control zone of each goal. Center goal control zones inco
Read more →