AI Chat UI Design

AI Chat UI Design — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Dynamic Graphics Project

    Dynamic Graphics Project

    The Dynamic Graphics Project (commonly referred to as DGP) is an interdisciplinary research laboratory at the University of Toronto devoted to projects involving computer graphics, computer vision, human computer interaction, and visualization. The lab began as the computer graphics research group of Department of Computer Science Professor Leslie Mezei in 1967. Mezei invited Bill Buxton, a pioneer of human–computer interaction (HCI) to join. In 1972, Ronald Baecker, another HCI pioneer joined, establishing DGP as the first Canadian university group focused on computer graphics and human-computer interaction. According to csrankings.org, the DGP is the top research institution in the world for the combined subfields of computer graphics, HCI, and visualization. Since then, DGP has hosted many well known faculty and students in computer graphics, computer vision and HCI (e.g., Alain Fournier, Bill Reeves, Jos Stam, Demetri Terzopoulos, Marilyn Tremaine). DGP also occasionally hosts artists in residence (e.g., Oscar-winner Chris Landreth). Many past and current researchers at Autodesk (and before that Alias Wavefront) graduated after working at DGP. DGP is located in the St. George campus of University of Toronto in the Bahen Centre for Information Technology. DGP researchers regularly publish at ACM SIGGRAPH, ACM SIGCHI and ICCV. DGP hosts the Toronto User Experience (TUX) Speaker Series and the Sanders Series Lectures. == Notable alumni == Bill Buxton (MS 1978) James McCrae (PhD 2013) Dimitris Metaxas (PhD 1992) Bill Reeves (MS 1976, Ph.D. 1980) Jos Stam (MS 1991, Ph.D. 1995)

    Read more →
  • Catalog server

    Catalog server

    A catalog server provides a single point of access that allows users to centrally search for information across a distributed network. In other words, it indexes databases, files and information across large network and allows keywords, Boolean and other searches. If you need to provide a comprehensive searching service for your intranet, extranet or even the Internet, a catalog server is a standard solution.

    Read more →
  • Swizzling (computer graphics)

    Swizzling (computer graphics)

    In computer graphics, swizzles are a class of operations that transform vectors by rearranging components. Swizzles can also project from a vector of one dimensionality to a vector of another dimensionality, such as taking a three-dimensional vector and creating a two-dimensional or five-dimensional vector using components from the original vector. For example, if A = {1,2,3,4}, where the components are x, y, z, and w respectively, one could compute B = A.wwxy, whereupon B would equal {4,4,1,2}. Additionally, one could create a two-dimensional vector with A.wx or a five-dimensional vector with A.xyzwx. Combining vectors and swizzling can be employed in various ways. This is common in GPGPU applications. In terms of linear algebra, this is equivalent to multiplying by a matrix whose rows are standard basis vectors. If A = ( 1 , 2 , 3 , 4 ) T {\displaystyle A=(1,2,3,4)^{T}} , then swizzling A {\displaystyle A} as above looks like A . w w x y = [ 0 0 0 1 0 0 0 1 1 0 0 0 0 1 0 0 ] [ 1 2 3 4 ] = [ 4 4 1 2 ] . {\displaystyle A.\!wwxy={\begin{bmatrix}0&0&0&1\\0&0&0&1\\1&0&0&0\\0&1&0&0\end{bmatrix}}{\begin{bmatrix}1\\2\\3\\4\end{bmatrix}}={\begin{bmatrix}4\\4\\1\\2\end{bmatrix}}.}

    Read more →
  • Operational image

    Operational image

    An operational image, also known as operative image, is an image that serves a functional, rather than aesthetic, purpose. Operational images are not intended to be viewed by people as representations of the real world; they are created to be used as instruments in performing some task or operation, often by machine automation. Operational images are used in a wide variety of applications, such as weapons targeting and guidance systems, and assisting surgeons performing robot-assisted surgery. The term "operational image" was first coined in 2000 by German filmmaker Harun Farocki in the first part of his three-part audiovisual installation, Eye/Machine. Farocki's installation included operational images used by militaries, such as weapons guidance and targeting systems. Eye/Machine featured images shown to the public by the United States military from the cameras used by laser-guided missiles in the Gulf War. Farocki defined operational images as "Images without a social goal, not for edification, not for reflection," and that they "do not represent an object, but rather are part of an operation." According to Volker Pantenburg, operational images are more accurately characterized as "visualizations of data". He describes operational images as a "working image" or an image that "performs work". Operational images are ubiquitous in modern society, used for a variety of military and non-military applications, such as inspecting sewer piping, and assisting surgeons performing robotic surgery.

    Read more →
  • Augmented Analytics

    Augmented Analytics

    Augmented Analytics is an approach of data analytics that employs the use of machine learning and natural language processing to automate analysis processes normally done by a specialist or data scientist. The term was introduced in 2017 by Rita Sallam, Cindi Howson, and Carlie Idoine in a Gartner research paper. Augmented analytics is based on business intelligence and analytics. In the graph extraction step, data from different sources are investigated. == Defining Augmented Analytics == Machine Learning – a systematic computing method that uses algorithms to sift through data to identify relationships, trends, and patterns. It is a process that allows algorithms to dynamically learn from data instead of having a set base of programmed rules. Natural language generation (NLG) – a software capability that takes unstructured data and translates it into plain-English, readable, language. Automating Insights – using machine learning algorithms to automate data analysis processes. Natural Language Query – enabling users to query data using business terms that are either typed onto a search box or spoken. == Data Democratization == Data Democratization is the democratizing data access in order to relieve data congestion and get rid of any sense of data "gatekeepers". This process must be implemented alongside a method for users to make sense of the data. This process is used in hopes of speeding up company decision making and uncovering opportunities hidden in data. There are three aspects to democratising data: Data Parameterisation and Characterisation. Data Decentralisation using an OS of blockchain and DLT technologies, as well as an independently governed secure data exchange to enable trust. Consent Market-driven Data Monetisation. When it comes to connecting assets, there are two features that will accelerate the adoption and usage of data democratisation: decentralized identity management and business data object monetization of data ownership. It enables multiple individuals and organizations to identify, authenticate, and authorize participants and organizations, enabling them to access services, data or systems across multiple networks, organizations, environments, and use cases. It empowers users and enables a personalized, self-service digital onboarding system so that users can self-authenticate without relying on a central administration function to process their information. Simultaneously, decentralized identity management ensures the user is authorized to perform actions subject to the system’s policies based on their attributes (role, department, organization, etc.) and/ or physical location. == Use cases == Agriculture – Farmers collect data on water use, soil temperature, moisture content and crop growth, augmented analytics can be used to make sense of this data and possibly identify insights that the user can then use to make business decisions. Smart Cities – Many cities across the United States, known as Smart Cities collect large amounts of data on a daily basis. Augmented analytics can be used to simplify this data in order to increase effectiveness in city management (transportation, natural disasters, etc.). Analytic Dashboards – Augmented analytics has the ability to take large data sets and create highly interactive and informative analytical dashboards that assist in many organizational decisions. Augmented Data Discovery – Using an augmented analytics process can assist organizations in automatically finding, visualizing and narrating potentially important data correlations and trends. Data Preparation – Augmented analytics platforms have the ability to take large amounts of data and organize and "clean" the data in order for it to be usable for future analyses. Business – Businesses collect large amounts of data, daily. Some examples of types of data collected in business operations include; sales data, consumer behavior data, distribution data. An augmented analytics platform provides access to analysis of this data, which could be used in making business decisions.

    Read more →
  • Patch management

    Patch management

    Patch management (or patch management policy or patch policy or patch management process) is concerned with the identification, acquisition, distribution, testing and installation of patches to systems. Proper patch management can be a net productivity boost for an organization. Patches can be used to defend against and eliminate potential vulnerabilities of a system, so that no threats may exploit them. Problems can arise during patch management, including buggy patches that either fail to fix their problem or introduce new issues. Patch management tools help orchestrate all of the procedures involved in patch management. == Description == Patch management is defined as a sub-practice of various disciplines including vulnerability management (part of security management), lifecycle management (with further possible sub-classification into application lifecycle management and release management), change management, and systems management. The practice is broadly concerned with the identification, acquisition, distribution, and installation of patches to systems. Some definitions of patch management are as a software-level practice, while others are as a systems-level process: software, drivers, and firmware. == Cost–benefit analysis == While reserving time for patching takes up enterprise resources, there are balancing factors which can make proper patch management into a net productivity boost for an organization. Up-to-date systems often perform more efficiently, less costly, with less errors, less security risks, and better user workflow. Additionally, compliance with changing local and federal regulations are more likely to be satisfied. Patching security vulnerabilities has been one among many competing priorities for organizations, leading to longer periods before patching for some organizations. Equifax was too slow to implement its 2015 patch management plan to be able to mitigate or prevent the 2017 Equifax data breach, leading to scrutiny from regulators. == Relation to security management == Patches can be used to defend against and eliminate potential vulnerabilities of a system, so that no threats may exploit them; therefore, patch management can be considered a sub-discipline of vulnerability management. Every patchable device in a system presents an attack surface that must be secured. === Time plan === Automatic updates are where the patch is applied automatically with little to know actions or planning required. This approach is recommended for many individuals and organizations. Some organizations also have to prioritize which patches to prioritize given limited resources. Patch Tuesday is the most common process when major companies like Microsoft and Adobe release patches on a known date so that companies can plan resources around implementing the patches more quickly. Linux is open-sourced and patches can be released at any time, leading some to rely on mailing lists or other ways to be alerted to updates. === Inventory === Taking an inventory of software and hardware, including versions can make it easier to correlate with bugs or patches as they become known. Taking stock of how much education and support others in an organization need to install their patches can also help for planning how to implement the patch or design systems to begin with. Streamlining the process by using tools that can communicate with each other can also help to reduce the time of exposure to known vulnerabilities. == Challenges == There are a multitude of problems that can arise during patch management. A common issue is buggy patches, which either fail to fix their problem or introduce new issues. Another issue is deployment synchronization, since various subsystems may receive instructions to update at different times. Similarly, the difficulty of patch management across many devices may grow at an uncontrollable rate depending on organizational size. One prominent demonstration of the challenges facing proper patch management was the buggy Falcon Sensor patch by CrowdStrike which caused one of the worst IT outages of all time. == Implementations == A patch management tool (alternatively patch manager, patch management system, patch management software, or centralized patch management) help orchestrate all of the procedures involved in patch management. Tools can be in-house (applied locally by local administrators), or external, as with managed service providers (applied externally by a provider). === Patch management software === Windows Update for Business, System Center Configuration Manager, and Windows Server Update Services offer control over patch deployment, with features enabling testing, scheduling updates, and setting custom configurations on Windows platforms. === Managed service providers === == Regulatory requirements (United States) == Timely patching of software vulnerabilities is a requirement under multiple regulatory frameworks in the United States. The Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to protect electronic protected health information by implementing security measures sufficient to reduce risks to a reasonable and appropriate level, which industry guidance has long interpreted to include timely patch management. A proposed new HIPAA Security Rule would make patch management requirements explicit, mandating that covered entities and business associates deploy security patches and updates within a defined risk-based timeline and maintain written procedures for prioritizing, testing, and applying patches to systems that store, process, or transmit ePHI. The 2025 proposal continues to receive industry pushback as of December 2025. HIPAA was last updated in 2013. The Payment Card Industry Data Security Standard (PCI DSS) requires organizations to protect system components from known vulnerabilities by installing applicable security patches within one month of release for critical patches. The Cybersecurity and Infrastructure Security Agency (CISA) maintains a Known Exploited Vulnerabilities (KEV) catalog that compels U.S. federal agencies to remediate listed vulnerabilities within specified timelines. Agencies are typically required to patch within 3 weeks, though some vulnerabilities must be fixed within 24 hours.

    Read more →
  • Tapingo

    Tapingo

    Tapingo was an American mobile commerce application that offers advance ordering for pickup and food delivery services for college campuses. The company was acquired by Grubhub in September 2018 for approximately $150 million. Following the acquisition, Tapingo’s campus-ordering functionality was integrated into the Grubhub app (Grubhub Campus Dining) and the Tapingo service was discontinued during 2019. Tapingo is differentiated from other on-demand delivery/logistics companies, such as Waiter.com, Postmates, or DoorDash, by focusing its efforts on serving the college market. Through Tapingo, users can browse menus, place orders, pay for the meal and schedule the pickup or have it delivered. On certain campuses, students are able to use their university's meal dollars to pay for food. In the spring of 2012, Tapingo first launched its services on five campuses (Santa Clara University, Loyola Marymount University, Biola University, the University of Maine, and California Lutheran University), and has since expanded to more than 200 college campuses across the U.S. and Canada, serving 100 markets. To date, Tapingo has received venture funding from Carmel Ventures, Khosla Ventures, Kinzon Capital, DCM Ventures and Qualcomm Ventures. In fall 2015, Tapingo announced expansion plans through major partnership deals with national brands like Chipotle Mexican Grill and 7-Eleven, regional restaurants such as Taco Bueno, and global foodservice provider Aramark.

    Read more →
  • TowIt

    TowIt

    "TowIt" is a free, global, cross-platform mobile app, website, and Web API that allows civilians to report parking violations and dangerous driving in real-time. The mission is to remove the barriers required to make cities effectively fight and deter bad parking and dangerous driving habits. The company ultimately aims to better existing social controls in order to drive necessary behavioral change through increased education, real-time reporting, optimized enforcement, as well as the resulting reactivity. == User base and adoption == The application has users reporting vehicular infractions in upwards of 30 countries. The top reporting countries are: Portugal, Canada, United States of America and Australia. Users have adopted TowIt for a variety of reasons, usually central to their geographical location and the prominent offences in those specific areas. For instance, the majority of Portuguese reports are cars parked on sidewalks, footpaths and pedestrian crossings, Australian reports are largely focused on the abuse of disabled parking spaces, and in Toronto or San Francisco users generally capture cars parked in bicycle lanes. == Functions == === Data collection === TowIt gathers data on individual parking offences, the prominence of various offence types, as well as recurring offenders. This allows the company to identify trends and hotspots in order to take action against problem vehicles, as well as to help improve urban planning, traffic congestion and gridlock management. Individuals modify or improve an aspect of their behavior in response to their awareness of being observed, theoretically more so when demonstrating selfishness, egocentrism, narcissism and anti-social behavior. The company states that by becoming a user, one can "help TowIt relieve congestion, reduce collisions, open up economies, improve the environment and enhance the lives of urban residents and suburban commuters alike". The company has acknowledged that there are numerous legislative changes that would be required to integrate with governments at any level in many countries. A simple three-step process allows users to take a photo of an offending vehicle and subsequently verifying the offending vehicle's license plate information before submitting by tapping the TowIt (submit) button. Photographical evidence can only be captured with the camera from within the TowIt application. An Internet connection is required. The company has stated that this was purposefully done for quality control and report validation purposes. Users may only submit and view their own report history on either the iOS or Android applications. Globally submitted reports are displayed uncensored and in aggregate only on the Android application and the TowIt website. The "Global Feed" feature was removed from iOS (see iTunes Connect Acceptance Issues). TowIt's back-end automatically geotags the report and compares it to local parking by-law data, including by-law types, locations, times, side(s) of street, etc.- where available. Valid reports are posted to the global feed, to the TowIt website, and passed on to municipalities and police for enforcement (where connected). === Technologies used under license === TowIt currently utilizes the following software or software libraries under license: AngularJS, Apache Cordova, Apple iTunes Store EULA, Chart.js, Google Play Distribution Agreement, Ionic Framework, MongoDB, Moment.js, Python 2.7, Python Flask, and jQuery. == Company history == The TowIt application was conceived by Michael Duncan McArthur on December 5, 2014, as a response to Toronto Mayor John Tory's election mandate to "get this city moving". The application was announced via TowIt's official Twitter page on January 6, 2015. After the initial public announcement, Michael & Gregory were contacted by members of John Tory's staff on January 8, 2015, and invited to demo a prototype at Toronto City Hall on January 12, 2015. The two were also invited to meet with Toronto Councillor Norm Kelly, in his City Hall office, for a subsequent demo of the live Android application on January 28, 2015. A similar meeting and demo took place with members of the Traffic Services department of Toronto Police Service on February 2, 2015. Michael & Gregory teamed up with friends and Toronto-based developers Dae-Seon Moon, Jesse Malone, and Marcus Veres to complete the prototype in time to meet the city's imposed demo deadline and to launch the initial Android version of the application. TowIt officially launched on the Android platform on January 16, 2015. A subsequent iOS launch took place on March 19, 2015. === iTunes connect acceptance issues === The iOS version of the application was delayed for approximately two months, only after significant deliberation with Apple's iTunes Connect review board around (as then stated) rule: "14.1 - Any App that is defamatory, offensive, mean-spirited, or likely to place the targeted individual or group in harm's way will be rejected." The result was having to remove the "Global Feed" feature from the iOS platform, in which civilian users could view all recent reports from within the application. This feature still exists on the Android platform. === Business and legal === TowIt engaged Wildeboer Dellelce, one of Canada's leading business law and transactional corporate finance law firms, on January 17, 2015. The company filed for incorporation as "TowIt Solutions Inc." by both Michael & Gregory in the Canadian province of Ontario on January 22, 2015. TowIt continues to operate under a Freemium business model. The company is 100% bootstrapped and has received no outside investment to date. TowIt was accepted into the MaRS Discovery District's Venture Services program on March 4, 2015. === Lobbyist registration === After receiving initial press coverage in January and February 2015, an unknown entity reported Michael & Gregory's initial communications with city staff to the City of Toronto's Lobbyist Registrar. This complaint resulted in legal threats of fines received on February 10, 2015, for apparently and unknowingly breaking municipal lobbying by-laws. These fines (of up to $100,000) were eventually withdrawn after Michael & Gregory immediately provided all records of communication with city officials and registered as lobbyists in the City of Toronto on the subjects of By-law / Regulation, Parking, and Technology. Their registration was accepted by the Lobbyist Registrar on March 6, 2015. However, communication with Toronto city staff was reduced greatly as a result, which the company believes may have been the desired intent of the original complaint. === Outreach and activism === TowIt encourages its global user base to reach out to their local government representatives to promote the app at the users' own will. This tactic is used not only to demonstrate grassroots support, but also to avoid future lobbying issues. On June 2, 2015, the company officially partnered with Australian campaign "No Permit No Park" who advocate for the creation of inclusive communities. == Reception == The Best Planning Apps for 2016 by Planetizen, 5 Toronto apps you should be using by Indie88, 12 Best Apps Made In Canada by TechVibes.

    Read more →
  • Thermal attack

    Thermal attack

    A thermal attack (aka thermal imaging attack) is an approach that exploits heat traces to uncover the entered credentials. These attacks rely on the phenomenon of heat transfer from one object to another. During authentication, heat transfers from the users' hands to the surface they are interacting with, leaving heat traces behind that can be analyzed using thermal cameras that operate in the far-infrared spectrum. These traces can be recovered and used to reconstruct the passwords. In some cases, the attack can be successful even 30 seconds after the user has authenticated. Thermal attacks can be performed after the victim had authenticated, alleviating the need for in-situ observation attacks (e.g., shoulder surfing attacks) that can be affected by hand occlusions. While smudge attacks can reveal the order of entries of graphical passwords, such as the Android Lock Patterns, thermal attacks can reveal the order of entries even in the case of PINs or alphanumeric passwords. The reason thermal attacks leak information about the order of entry is because keys and buttons that the user touches first lose heat over time, while recently touched ones maintain the heat signature for a longer time. This results in distinguishable heat patterns that can tell the attacker which entry was entered first. Thermal attacks were shown to be effective against plastic keypads, such as the ones used to enter credit card's PINs in supermarkets and restaurants, and on handheld mobile devices such as smartphones and tablets. In their paper published at the Conference on Human Factors in Computing Systems (CHI 2017), Abdelrahman et al. showed that the attack is feasible on today's smartphones. They also proposed some ways to mitigate the attack, such as swiping randomly on the screen to distort the heat traces, or forcing maximum CPU usage for a few seconds. Thermal attacks can also infer passwords from heat traces on keyboards. Researchers at the University of Glasgow showed that attackers who use AI methods can be more effective in performing thermal attacks. Their study presents a new tool called ThermoSecure and evaluates it in two user studies. The results show that ThermoSecure can successfully attack passwords with an average accuracy of 92% to 55%, depending on the length of the password. The effectiveness of thermal attacks also depends on typing behavior and the material of the keycaps. ABS keycaps, which retain heat traces longer, are more vulnerable to thermal attacks. The study also discusses ways to protect against thermal attacks and presents seven potential mitigation approaches. Dr Khamis, who led the development of the technology with Norah Alotaibi and John Williamson, said with thermal imaging cameras more affordable than ever and machine learning becoming more accessible, it was "very likely that people around the world are developing systems along similar lines to ThermoSecure in order to steal passwords". == Thermal Attack Mitigation == === Simple and Practical Measures === One basic and effective way to mitigate thermal attacks is to deliberately create heat noise over the input interface, such as a keypad or keyboard, after entering a password. For instance, placing one's palm over the entire interface for a few seconds after use can obscure the thermal pattern left by the fingers, making it much more difficult for an unauthorized user to interpret the heat traces. === Range of Proposed Strategies === In addition to simple methods, researchers have developed a spectrum of mitigation strategies to counter thermal attacks. These strategies encompass 15 different approaches including: Use of Biometrics: Replacing traditional pin codes or passwords with biometric authentication, such as fingerprint recognition or facial recognition, eliminates the issue of residual heat on keypads. Heating the Interface: Implementing technology to slightly warm up the keypad can effectively neutralize the heat traces left by fingers, preventing thermal cameras from capturing the pattern. Randomizing Key Layouts: Employing dynamic key layouts that change positions every time the interface is used, making it impossible to correlate heat patterns with static input positions. === Technological Intervention on Thermal Cameras === Another avenue for mitigation is to address the issue at the source by modifying thermal cameras. Proposals have been made to develop thermal cameras that can automatically detect vulnerable interfaces such as keyboards or keypads. When these interfaces are detected within the camera's field of view, the camera would be programmed to prevent the user from recording images of them. This solution, however, would require widespread adoption by thermal camera manufacturers. Additionally, the approach is particularly viable for thermal cameras connected to a computing device, such as a smartphone, which can process the images in real time. Many affordable thermal cameras are standalone and do not have connectivity or processing capabilities. However, thermal cameras designed for connection to mobile devices can utilize the smartphone's processing power, making this mitigation approach feasible for such devices.

    Read more →
  • Film recorder

    Film recorder

    A film recorder is a graphical output device for transferring images to photographic film from a digital source. In a typical film recorder, an image is passed from a host computer to a mechanism to expose film through a variety of methods, historically by direct photography of a high-resolution cathode-ray tube (CRT) display. The exposed film can then be developed using conventional developing techniques, and displayed with a slide or motion picture projector. The use of film recorders predates the current use of digital projectors, which eliminate the time and cost involved in the intermediate step of transferring computer images to film stock, instead directly displaying the image signal from a computer. Motion picture film scanners are the opposite of film recorders, copying content from film stock to a computer system. Film recorders can be thought of as modern versions of kinescopes. == Design == === Operation === All film recorders typically work in the same manner. The image is fed from a host computer as a raster stream over a digital interface. A film recorder exposes film through various mechanisms; flying spot (early recorders); photographing a high resolution video monitor; electron beam recorder (Sony HDVS); a CRT scanning dot (Celco); focused beam of light from a light valve technology (LVT) recorder; a scanning laser beam (Arrilaser); or recently, full-frame LCD array chips. For color image recording on a CRT film recorder, the red, green, and blue channels are sequentially displayed on a single gray scale CRT, and exposed to the same piece of film as a multiple exposure through a filter of the appropriate color. This approach yields better resolution and color quality than possible with a tri-phosphor color CRT. The three filters are usually mounted on a motor-driven wheel. The filter wheel, as well as the camera's shutter, aperture, and film motion mechanism are usually controlled by the recorder's electronics and/or the driving software. CRT film recorders are further divided into analog and digital types. The analog film recorder uses the native video signal from the computer, while the digital type uses a separate display board in the computer to produce a digital signal for a display in the recorder. Digital CRT recorders provide a higher resolution at a higher cost compared to analog recorders due to the additional specialized hardware. Typical resolutions for digital recorders were quoted as 2K and 4K, referring to 2048×1366 and 4096×2732 pixels, respectively, while analog recorders provided a resolution of 640×428 pixels in comparison. Higher-quality LVT film recorders use a focused beam of light to write the image directly onto a film loaded spinning drum, one pixel at a time. In one example, the light valve was a liquid-crystal shutter, the light beam was steered with a lens, and text was printed using a pre-cut optical mask. The LVT will record pixel beyond grain. Some machines can burn 120-res or 120 lines per millimeter. The LVT is basically a reverse drum scanner. The exposed film is developed and printed by regular photographic chemical processing. === Formats === Film recorders are available for a variety of film types and formats. The 35 mm negative film and transparencies are popular because they can be processed by any photo shop. Single-image 4×5 film and 8×10 are often used for high-quality, large format printing. Some models have detachable film holders to handle multiple formats with the same camera or with Polaroid backs to provide on-site review of output before exposing film. == Uses == Film recorders are used in digital printing to generate master negatives for offset and other bulk printing processes. For preview, archiving, and small-volume reproduction, film recorders have been rendered obsolete by modern printers that produce photographic-quality hardcopies directly on plain paper. They are also used to produce the master copies of movies that use computer animation or other special effects based on digital image processing. However, most cinemas nowadays use Digital Cinema Packages on hard drives instead of film stock. === Computer graphics === Film recorders were among the earliest computer graphics output devices; for example, the IBM 740 CRT Recorder was announced in 1954. Film recorders were also commonly used to produce slides for slide projectors; but this need is now largely met by video projectors that project images directly from a computer to a screen. The terms "slide" and "slide deck" are still commonly used in presentation programs. === Current uses === Currently, film recorders are primarily used in the motion picture film-out process for the ever increasing amount of digital intermediate work being done. Although significant advances in large venue video projection alleviates the need to output to film, there remains a deadlock between the motion picture studios and theater owners over who should pay for the cost of these very costly projection systems. This, combined with the increase in international and independent film production, will keep the demand for film recording steady for at least a decade. == Key manufacturers == Traditional film recorder manufacturers have all but vanished from the scene or have evolved their product lines to cater to the motion picture industry. Dicomed was one such early provider of digital color film recorders. Polaroid, Management Graphics, Inc, MacDonald-Detwiler, Information International, Inc., and Agfa were other producers of film recorders. Arri is the only current major manufacturer of film recorders. Kodak Lightning I film recorder. One of the first laser recorders. Needed an engineering staff to set up. Kodak Lightning II film recorder used both gas and diode laser to record on to film. The last LVT machines produced by Kodak / Durst-Dice stopped production in 2002. There are no LVT film recorders currently being produced. LVT Saturn 1010 uses a LED exposure (RGB) to 8"x10" film at 1000-3000ppi. LUX Laser Cinema Recorder from Autologic/Information International in Thousand Oaks, California. Sales end in March 2000. Used on the 1997 film “Titanic”. Arri produces the Arrilaser line of laser-based motion picture film recorders. MGI produced the Solitaire line of CRT-based motion picture film recorders. Matrix, originally ImaPRO, a branch of Agfa Division, produced the QCR line of CRT-based motion picture film recorders. CCG, formerly Agfa film recorders, has been a steady manufacturer of film recorders based in Germany. In 2004 CCG introduced Definity, a motion picture film recorder utilizing LCD technology. In 2010 CCG introduced the first full LED LCD film recorder as a new step in film recording. Cinevator was made by Cinevation AS, in Drammen, Norway. The Cinevator was a real-time digital film recorder. It could record IN, IP and prints with and without sound Oxberry produced the Model 3100 film recorder camera system, with interchangeable pin-registered movements (shuttles) for 35 mm (full frame/Silent, 1.33:1) and 16 mm (regular 16, "2R"), and others have adapted the Oxberry movements for CinemaScope, 1.85:1, 1.75:1, 1.66:1, as well as Academy/Sound (1.37:1) in 35 mm and Super-16 in 16 mm ("1R"). For instance, the "Solitaire" and numerous others employed the Oxberry 3100 camera system. == History == Before video tape recorders or VTRs were invented, TV shows were either broadcast live or recorded to film for later showing, using the kinescope process. In 1967, CBS Laboratories introduced the Electronic Video Recording format, which used video and telecined-to-video film sources, which were then recorded with an electron-beam recorder at CBS' EVR mastering plant at the time to 35mm film stock in a rank of 4 strips on the film, which was then slit down to 4 8.75 mm (0.344 in) film copies, for playback in an EVR player. All types of CRT recorders were (and still are) used for film recording. Some early examples used for computer-output recording were the 1954 IBM 740 CRT Recorder, and the 1962 Stromberg-Carlson SC-4020, the latter using a Charactron CRT for text and vector graphic output to either 16 mm motion picture film, 16 mm microfilm, or hard-copy paper output. Later 1970 and 80s-era recording to B&W (and color, with 3 separate exposures for red, green, and blue)) 16 mm film was done with an EBR (Electron Beam Recorder), the most prominent examples made by 3M), for both video and COM (Computer Output Microfilm) applications. Image Transform in Universal City, California used specially modified 3M EBR film recorders that could perform color film-out recording on 16 mm by exposing three 16 mm frames in a row (one red, one green and one blue). The film was then printed to color 16 mm or 35 mm film. The video fed to the recorder could either be NTSC, PAL or SECAM. Later, Image Transform used specially modified VTRs to record 24 frame for their "Image Vision" system. The modified 1 inch type B videotape VTRs would record

    Read more →
  • Graphics

    Graphics

    Graphics (from Ancient Greek γραφικός (graphikós) 'pertaining to drawing, painting, writing, etc.') are visual images or designs on some surface, such as a wall, canvas, screen, paper, or stone, to inform, illustrate, or entertain. In contemporary usage, it includes a pictorial representation of data, as in design and manufacture, in typesetting and the graphic arts, and in educational and recreational software. Images that are generated by a computer are called computer graphics. Examples are photographs, drawings, line art, mathematical graphs, line graphs, charts, diagrams, typography, numbers, symbols, geometric designs, maps, engineering drawings, or other images. Graphics often combine text, illustration, and color. Graphic design may consist of the deliberate selection, creation, or arrangement of typography alone, as in a brochure, flyer, poster, web site, or book without any other element. The objective can be clarity or effective communication, association with other cultural elements, or merely the creation of a distinctive style. Graphics can be functional or artistic. The latter can be a recorded version, such as a photograph, or an interpretation by a scientist to highlight essential features, or an artist, in which case the distinction with imaginary graphics may become blurred. It can also be used for architecture. == History == The earliest graphics known to anthropologists studying prehistoric periods are cave paintings and markings on boulders, bone, ivory, and antlers, which were created during the Upper Palaeolithic period from 40,000 to 10,000 B.C. or earlier. Many of these were found to record astronomical, seasonal, and chronological details. Some of the earliest graphics and drawings are known to the modern world, from almost 6,000 years ago, are that of engraved stone tablets and ceramic cylinder seals, marking the beginning of the historical periods and the keeping of records for accounting and inventory purposes. Records from Egypt predate these and papyrus was used by the Egyptians as a material on which to plan the building of pyramids; they also used slabs of limestone and wood. From 600 to 250 BC, the Greeks played a major role in geometry. They used graphics to represent their mathematical theories such as the Circle Theorem and the Pythagorean theorem. In art, "graphics" is often used to distinguish work in a monotone and made up of lines, as opposed to painting. === Drawing === Drawing generally involves making marks on a surface by applying pressure from a tool or moving a tool across a surface. In which a tool is always used as if there were no tools it would be art. Graphical drawing is an instrumental guided drawing. === Printmaking === Woodblock printing, including images is first seen in China after paper was invented (about A.D. 105). In the West, the main techniques have been woodcut, engraving and etching, but there are many others. ==== Etching ==== Etching is an intaglio method of printmaking in which the image is incised into the surface of a metal plate using an acid. The acid eats the metal, leaving behind roughened areas, or, if the surface exposed to the acid is very thin, burning a line into the plate. The use of the process in printmaking is believed to have been invented by Daniel Hopfer (c. 1470–1536) of Augsburg, Germany, who decorated armour in this way. Etching is also used in the manufacturing of printed circuit boards and semiconductor devices. === Line art === Line art is a rather non-specific term sometimes used for any image that consists of distinct straight and curved lines placed against a (usually plain) background, without gradations in shade (darkness) or hue (color) to represent two-dimensional or three-dimensional objects. Line art is usually monochromatic, although lines may be of different colors. === Illustration === An illustration is a visual representation such as a drawing, painting, photograph or other work of art that stresses the subject more than form. The aim of an illustration is to elucidate or decorate a story, poem or piece of textual information (such as a newspaper article), traditionally by providing a visual representation of something described in the text. The editorial cartoon, also known as a political cartoon, is an illustration containing a political or social message. Illustrations can be used to display a wide range of subject matter and serve a variety of functions, such as: giving faces to characters in a story displaying a number of examples of an item described in an academic textbook (e.g. A Typology) visualizing step-wise sets of instructions in a technical manual communicating subtle thematic tone in a narrative linking brands to the ideas of human expression, individuality, and creativity making a reader laugh or smile for fun (to make laugh) funny === Graphs === A graph or chart is a graphic that represents tabular or numeric data. Charts are often used to make it easier to understand large quantities of data and the relationships between different parts of the data. === Diagrams === A diagram is a simplified and structured visual representation of concepts, ideas, constructions, relations, statistical data, etc., used to visualize and clarify the topic. === Symbols === A symbol, in its basic sense, is a representation of a concept or quantity; i.e., an idea, object, concept, quality, etc. In more psychological and philosophical terms, all concepts are symbolic in nature, and representations for these concepts are simply token artifacts that are allegorical to (but do not directly codify) a symbolic meaning, or symbolism. === Maps === A map is a simplified depiction of a space, a navigational aid which highlights relations between objects within that space. Usually, a map is a two-dimensional, geometrically accurate representation of a three-dimensional space. One of the first 'modern' maps was made by Waldseemüller. === Photography === One difference between photography and other forms of graphics is that a photographer, in principle, just records a single moment in reality, with seemingly no interpretation. However, a photographer can choose the field of view and angle, and may also use other techniques, such as various lenses to choose the view or filters to change the colors. In recent times, digital photography has opened the way to an infinite number of fast, but strong, manipulations. Even in the early days of photography, there was controversy over photographs of enacted scenes that were presented as 'real life' (especially in war photography, where it can be very difficult to record the original events). Shifting the viewer's eyes ever so slightly with simple pinpricks in the negative could have a dramatic effect. The choice of the field of view can have a strong effect, effectively 'censoring out' other parts of the scene, accomplished by cropping them out or simply not including them in the photograph. This even touches on the philosophical question of what reality is. The human brain processes information based on previous experience, making us see what we want to see or what we were taught to see. Photography does the same, although the photographer interprets the scene for their viewer. === Engineering drawings === An engineering drawing is a type of drawing and is technical in nature, used to fully and clearly define requirements for engineered items. It is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance (such as typefaces and line styles), size, etc. === Computer graphics === There are two types of computer graphics: raster graphics, where each pixel is separately defined (as in a digital photograph), and vector graphics, where mathematical formulas are used to draw lines and shapes, which are then interpreted at the viewer's end to produce the graphic. Using vectors results in infinitely sharp graphics and often smaller files, but, when complex, like vectors take time to render and may have larger file sizes than a raster equivalent. In 1950, the first computer-driven display was attached to MIT's Whirlwind I computer to generate simple pictures. This was followed by MIT's TX-0 and TX-2, interactive computing which increased interest in computer graphics during the late 1950s. In 1962, Ivan Sutherland invented Sketchpad, an innovative program that influenced alternative forms of interaction with computers. In the mid-1960s, large computer graphics research projects were begun at MIT, General Motors, Bell Labs, and Lockheed Corporation. Douglas T. Ross of MIT developed an advanced compiler language for graphics programming. S.A.Coons, also at MIT, and J. C. Ferguson at Boeing, began work in sculptured surfaces. GM developed their DAC-1 system, and other companies, such as Douglas, Lockheed, and McDonnell, also made significant developments. In 1968, ray tracing was first described by Arthur Appel of the IBM Research Center, Yorktown Heights, N

    Read more →
  • World Database of Happiness

    World Database of Happiness

    The World Database of Happiness is a web-based archive of research findings on subjective appreciation of life, based in the Erasmus Happiness Economics Research Organization of the Erasmus University Rotterdam in The Netherlands. The database contains both an overview of scientific publications on happiness and a digest of research findings. Happiness is defined as the degree to which an individual judges the quality of his or her life as a whole favorably. Two 'components' of happiness are distinguished: hedonic level of affect (the degree to which pleasant affect dominates) and contentment (perceived realization of wants). == Aims == The World Database of Happiness is a tool to quickly acquire an overview on the ever-growing stream of research findings on happiness Medio 2023 the database covered some 16,000 scientific publications on happiness, from which were extracted 23,000 distributional findings (on how happy people are) and another 24,000 correlational findings (on factors associated with more and less happiness). The first findings date from 1915. == Technique == The World Database of Happiness is a ‘findings archive’, which consists of electronic ‘finding pages’ on which separate research results are described in a standard format and terminology. These finding pages can be selected on various characteristics, such as population studies, the measure of happiness used and observed co-variates. All finding-pages have a specific internet address to which links can be made in scientific review papers or policy recommendations. This allows a concise presentation of many findings in a table, while providing readers with access to detail. == Scientific use == The Database has been cited in 254 scientific papers, for example to access under what conditions economic growth enhances average happiness or to show that rising mean happiness at first raises happiness inequality, but further rise will diminish these differences, or that healthy eating is associated with more happiness, even after controlling for the effect on health Another finding is that relative simple happiness training techniques raise happiness by some 5% == Popular use == The World Database of Happiness is often used by popular media to make lists of the happiest countries around the globe. An example is the Happy Planet Index, which aims to chart sustainable happiness all over the world by combining data on longevity, happiness and the size of the ecological footprint of citizens. == Strengths and weaknesses == The database has a clear conceptual focus, it includes only research findings on subjective enjoyment of one's life as a whole. Thereby it evades the Babel that has haunted the study of happiness for ages. The other side of that coin is that much interesting research is left out. The findings are reported with technical details about measurement and statistical analysis. This detail is welcomed by scholars, but makes the information difficult to digest for lay-persons. Still another limitation is that the determinants of happiness appear to vary considerably across persons and situations, which make it hard to draw general conclusions about the causes of happiness. What is clear is that poor health, separation, unemployment and lack of social contact are all strongly negatively associated with happiness. Another problem for the World database of happiness is that the studies on happiness increase with such a high rate that it gets increasingly difficult to offer a complete overview of all research findings. A further concern is that the Database of Happiness is exclusively focused on hedonic happiness (feeling good) and not on mature happiness that might exist in the face of suffering

    Read more →
  • Quantum robotics

    Quantum robotics

    Quantum robotics is an interdisciplinary field that investigates the intersection of robotics and quantum mechanics. This field, in particular, explores the applications of quantum phenomena such as quantum entanglement within the realm of robotics. Examples of its applications include quantum communication in multi-agent cooperative robotic scenarios, the use of quantum algorithms in performing robotics tasks, and the integration of quantum devices (e.g., quantum detectors) in robotic systems. == Introduction == The free-space quantum communication between mobile platforms was proposed for reconfigurable quantum key distribution (QKD) applications using unmanned aerial vehicle (UAVs, a.k.a. drones) in 2017. This technology was later advanced in various aspects in mobile drone and vehicle platforms in several configurations such as drone-to-drone, drone-to-moving vehicle, and vehicle-to-vehicle systems. Some research has contributed to low-size, low-weight, and low-power quantum key distribution systems for small-form UAVs, the characterization of a polarization-based receiver for mobile free-space optical QKD, and optical-relayed entanglement distribution using drones as mobile nodes. The topic of free-space quantum communication between mobile platforms, initially developed to meet the need for free-space QKD and entanglement distribution using mobile nodes, was brought into the robotics domain as an emerging interdisciplinary mechatronics topic to investigate the interface between quantum technologies and the robotic systems domain. The main advantage of such integrated technology is the guaranteed security in communication between multi-agent and cooperative autonomous systems. Other advances are anticipated. == Quantum entanglement == According to quantum mechanics, entanglement occurs when more than one particle become connected. If the state of one particle changes then it will instantly change the state of other particles regardless of their distance. Entangled sensors do the same kind of work and achieve strong sensitivity. A group of quantum robots can measure magnetic fields, gravitational fields and other physical properties using entangled sensors with high rate of accuracy. Again the connection of one robot to other is increased (become strong) by quantum entanglement. == Quantum teleportation == Quantum teleportation is the transfer of quantum information (not physical objects). This is used in case of multi robot process. One robot is programmed with a complex quantum update. Then that robot can teleport that complex quantum information (the update) to other robots. This teleportation or communication is very secure because all the work is done in quantum state. == Kinematics == Quantum computing has been proposed as being optimal for calculating inverse kinematics values. == Alice and Bob robots == In the realm of quantum mechanics, the names Alice and Bob are frequently employed to illustrate various phenomena, protocols, and applications. These include their roles in QKD, quantum cryptography, entanglement, and teleportation. The terms "Alice Robot" and "Bob Robot" serve as analogous expressions that merge the concepts of Alice and Bob from quantum mechanics with mechatronic mobile platforms (such as robots, drones, and autonomous vehicles). For example, the Alice Robot functions as a transmitter platform that communicates with the Bob Robot, housing the receiving detectors.

    Read more →
  • Per-pixel lighting

    Per-pixel lighting

    In computer graphics, per-pixel lighting refers to any technique for lighting an image or scene that calculates illumination for each pixel on a rendered image. This is in contrast to other popular methods of lighting such as vertex lighting, which calculates illumination at each vertex of a 3D model and then interpolates the resulting values over the model's faces to calculate the final per-pixel color values. Per-pixel lighting is commonly used with techniques, such as blending, alpha blending, alpha to coverage, anti-aliasing, texture filtering, clipping, hidden-surface determination, Z-buffering, stencil buffering, shading, mipmapping, normal mapping, bump mapping, displacement mapping, parallax mapping, shadow mapping, specular mapping, shadow volumes, high-dynamic-range rendering, ambient occlusion (screen space ambient occlusion, screen space directional occlusion, ray-traced ambient occlusion), ray tracing, global illumination, and tessellation. Each of these techniques provides some additional data about the surface being lit or the scene and light sources that contributes to the final look and feel of the surface. Most modern video game engines implement lighting using per-pixel techniques instead of vertex lighting to achieve increased detail and realism. The id Tech 4 engine, used to develop such games as Brink and Doom 3, was one of the first game engines to implement a completely per-pixel shading engine. All versions of the CryENGINE, Frostbite Engine, and Unreal Engine, among others, also implement per-pixel shading techniques. Deferred shading is a recent development in per-pixel lighting notable for its use in the Frostbite Engine and Battlefield 3. Deferred shading techniques are capable of rendering potentially large numbers of small lights inexpensively (other per-pixel lighting approaches require full-screen calculations for each light in a scene, regardless of size). == History == While only recently have personal computers and video hardware become powerful enough to perform full per-pixel shading in real-time applications such as games, many of the core concepts used in per-pixel lighting models have existed for decades. Frank Crow published a paper describing the theory of shadow volumes in 1977. This technique uses the stencil buffer to specify areas of the screen that correspond to surfaces that lie in a "shadow volume", or a shape representing a volume of space eclipsed from a light source by some object. These shadowed areas are typically shaded after the scene is rendered to buffers by storing shadowed areas with the stencil buffer. Jim Blinn first introduced the idea of normal mapping in a 1978 SIGGRAPH paper. Blinn pointed out that the earlier idea of unlit texture mapping proposed by Edwin Catmull was unrealistic for simulating rough surfaces. Instead of mapping a texture onto an object to simulate roughness, Blinn proposed a method of calculating the degree of lighting a point on a surface should receive based on an established "perturbation" of the normals across the surface. == Hardware rendering == Real-time applications, such as video games, usually implement per-pixel lighting through the use of pixel shaders, allowing the GPU hardware to process the effect. The scene to be rendered is first rasterized onto a number of buffers storing different types of data to be used in rendering the scene, such as depth, normal direction, and diffuse color. Then, the data is passed into a shader and used to compute the final appearance of the scene, pixel-by-pixel. Deferred shading is a per-pixel shading technique that has recently become feasible for games. With deferred shading, a "g-buffer" is used to store all terms needed to shade a final scene on the pixel level. The format of this data varies from application to application depending on the desired effect, and can include normal data, positional data, specular data, diffuse data, emissive maps and albedo, among others. Using multiple render targets, all of this data can be rendered to the g-buffer with a single pass, and a shader can calculate the final color of each pixel based on the data from the g-buffer in a final "deferred pass". Because deferred shading assumes only one visible fragment per pixel sample, transparent objects are generally handled in a separate forward pass. == Software rendering == Per-pixel lighting is also performed in software on many high-end commercial rendering applications which typically do not render at interactive framerates. This is called offline rendering or software rendering. NVidia's mental ray rendering software, which is integrated with such suites as Autodesk's Softimage is a well-known example.

    Read more →
  • DataViva

    DataViva

    DataViva is an information visualization engine created by the Strategic Priorities Office of the government of Minas Gerais. DataViva makes official data about exports, industries, locations and occupations available for the entirety of Brazil through eight apps and more than 100 million possible visualizations. The first set of datum – also available at ALICEWEB – is provided by MDIC (Ministry of Development, Industry and Foreign Trade) / SECEX (Secretariat of Foreign Trade), an official institution of the Government of Brazil and shows foreign trade statistics for all exporting municipalities in the country. The other database, provided by Ministério do Trabalho e Emprego (MTE – Ministry of Labor and Employment), shows information about all the industries and occupations in Brazil (RAIS – Annual Social Information Report). The platform consists of eight core applications, each of which allows different ways of visualizing the data available. Some applications are descriptive, that is, showing data aggregated at various levels in a simple and comparative way, such as Treemapping. Others are prescriptive, using calculations that allow an analytic visualization of the data, based on theories such as the Product Space. All the applications are generated using D3plus, an open source JavaScript library built on top of D3.js by Alexander Simoes and Dave Landry. Inspired by The Observatory of Economic Complexity, DataViva is an open data, open-source, and free to use tool. It was developed in a partnership with Datawheel, co-founded by MIT Media Lab Professor César Hidalgo, and is maintained by the Government of Minas Gerais.

    Read more →