AI Chat List

AI Chat List — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Inferential theory of learning

    Inferential theory of learning

    Inferential Theory of Learning (ITL) is an area of machine learning which describes inferential processes performed by learning agents. ITL has been continuously developed by Ryszard S. Michalski, starting in the 1980s. The first known publication of ITL was in 1983. In the ITL learning process is viewed as a search (inference) through hypotheses space guided by a specific goal. The results of learning need to be stored. Stored information will later be used by the learner for future inferences. Inferences are split into multiple categories including conclusive, deduction, and induction. In order for an inference to be considered complete it was required that all categories must be taken into account. This is how the ITL varies from other machine learning theories like Computational Learning Theory and Statistical Learning Theory; which both use singular forms of inference. == Usage == The most relevant published usage of ITL was in scientific journal published in 2012 and used ITL as a way to describe how agent-based learning works. According to the journal "The Inferential Theory of Learning (ITL) provides an elegant way of describing learning processes by agents".

    Read more →
  • Kernel-phase

    Kernel-phase

    Kernel-phases are observable quantities used in high resolution astronomical imaging used for superresolution image creation. It can be seen as a generalization of closure phases for redundant arrays. For this reason, when the wavefront quality requirement are met, it is an alternative to aperture masking interferometry that can be executed without a mask while retaining phase error rejection properties. The observables are computed through linear algebra from the Fourier transform of direct images. They can then be used for statistical testing, model fitting, or image reconstruction. == Prerequisites == In order to extract kernel-phases from an image, some requirements must be met: Images are nyquist-sampled (at least 2 pixels per resolution element ( λ D {\displaystyle {\frac {\lambda }{D}}} )) Images are taken in near monochromatic light Exposure time is shorter than the timescale of aberrations Strehl ratio is high (good adaptive optics) Linearity of the pixel response (i.e. no saturation) Deviations from these requirements are known to be acceptable, but lead to observational bias that should be corrected by the observation of calibrators. == Definition == The method relies on a discrete model of the instrument's pupil plane and the corresponding list of baselines to provide corresponding vectors φ {\displaystyle \varphi } of pupil plane errors and Φ {\displaystyle \Phi } of image plane Fourier Phases. When the wavefront error in the pupil plane is small enough (i.e. when the Strehl ratio of the imaging system is sufficiently high), the complex amplitude associated to the instrumental phase in one point of the pupil φ k {\displaystyle \varphi _{k}} , can be approximated by e i φ k ≈ 1 + i φ k {\displaystyle e^{i\varphi _{k}}\approx 1+{\mathit {i}}\varphi _{k}} . This permits the expression of the pupil-plane phase aberrations φ {\displaystyle \varphi } to the image plane Fourier phase as a linear transformation described by the matrix A {\displaystyle A} : Φ = Φ 0 + A ⋅ φ {\displaystyle \Phi =\Phi _{0}+A\cdot \varphi } Where Φ 0 {\displaystyle \Phi _{0}} is the theoretical Fourier phase vector of the object. In this formalism, singular value decomposition can be used to find a matrix K {\displaystyle K} satisfying K ⋅ A = 0 {\displaystyle K\cdot A=0} . The rows of K {\displaystyle K} constitute a basis of the kernel of A T {\displaystyle A^{T}} . K ⋅ Φ = K ⋅ Φ 0 + K ⋅ A ⋅ φ {\displaystyle K\cdot \Phi =K\cdot \Phi _{0}+{\cancel {K\cdot A\cdot \varphi }}} The vector K . Φ {\displaystyle K.\Phi } is called the kernel-phase vector of observables. This equation can be used for model-fitting as it represents the interpretation of a sub-space of the Fourier phase that is immune to the instrumental phase errors to the first order. == Applications == The technique was first used in the re-analysis of archival images from the Hubble Space Telescope where it enabled the discovery of a number of brown dwarf in close binary systems. The technique is used as an alternative to aperture masking interferometry, especially for fainter stars because it does not require the use of masks that typically block 90% of the light, and therefore allows higher throughput. It is also considered to be an alternative to coronagraphy for direct detection of exoplanets at very small separations (below 2 λ D {\displaystyle 2{\frac {\lambda }{D}}} ) where coronagraphs are limited by the wavefront errors of adaptive optics. The same framework can be used for wavefront sensing. In the case of an asymmetric aperture, a pseudo-inverse of A {\displaystyle A} can be used to reconstruct the wavefront errors directly from the image. A Python library called xara is available on GitHub and maintained by Frantz Martinache to facilitate the extraction and interpretation of kernel-phases. The KERNEL project, has received funding from the European Research Council to explore the potential of these observables for a number of use-cases, including direct detection of exoplanets, image reconstruction, and image plane wavefront sensing for adaptive optics.

    Read more →
  • Agent-assisted automation

    Agent-assisted automation

    Agent-assisted automation is a type of call center technology that automates elements of what the call center agent 1) does with his/her desktop tools and/or 2) says to customers during the call using pre-recorded audio. It is a relatively new category of call center technology that shows promise in improving call center productivity and compliance. == Types of agent-assisted automation == === Pre-recorded audio === Pre-recorded audio (sometimes referred to as soundboard (computer program) or as soundboard technology) is another form of agent-assisted automation. The purpose of using pre-recorded messages is to increase the probability (and in some cases error-proof the process so) that the right information is provided to customers at the right time. The required disclosures are pre-recorded to ensure accuracy and understandability. By integrating the recordings with the customer relationship management software, the right combination of disclosures can be played based on the combination of goods and services the customer purchased. The integration with the customer relationship management software also ensures that the order cannot be submitted until the disclosures are played, essentially error-proofing (poka-yoke) the process of ensuring the customer gets all the required consumer protection information. Phone surveys are ideal applications of this technology. Whether surveying market preferences or political views, the pre-recorded audio with an agent listening allows the questions to be asked in the same way every time, uninfluenced by the agents' fatigue levels, accents, or their own views. === Fraud prevention === Fraud prevention is a specialized type of agent-assisted automation focused on reducing ID theft and credit card fraud. ID theft and credit card fraud are huge threats for call centers and their customers and few good solutions exist, but new agent-assisted automation solutions are producing promising results. The technology allows the agents to remain on the phone while the customers use their phone key pads to enter the information. The tones are masked and the information passes directly into the customer relationship management system or payment gateway in the case of credit card transactions. The automation essentially makes it impossible for call center agents and also call center personnel that might be monitoring the calls to steal the credit card number, social security number, or other personally identifiable information. === Outbound telemarketing === Another specialized application space of agent-assisted automation is in outbound telemarketing, which goes under numerous headings including outbound prospecting, cold calling, solicitation, fund-raising, etc. Turnover is high among agents engaged in this kind of work because the task is tedious and emotionally difficult. It is tedious because the agent spends the bulk of their day, not talking to qualified leads, but in getting wrong numbers and answering machines. == Benefits == Just as automation has benefited manufacturing by reducing the mental and physical effort required of workers while simultaneously improving throughput, quality, and safety, agent-assisted automation is improving call center results while reducing the tiring aspects of the job for agents. In some cases, the agent-assisted automation streamlines the process and allows calls to be handled more quickly. By eliminating cutting and pasting from one application to another, by auto-navigating applications, and by providing a single view of the customer, agent-assisted automation can reduce call handle time and increase agent productivity. Second, in theory, the more steps that can be automated and the more logic that can be built into the call flow (e.g., if the customer buys items 2 and 9, then disclosures a, c, and f are read by the pre-recorded audio), then companies may be able to reduce the amount of training that is required of the agents while at the same time ensuring more consistency and accuracy. However, no published studies have reported this result yet. But an even larger problem in call centers is between-agent variation in behavior and results. Agents differ in the amount of training and coaching they receive, they differ in the amount of experience they have, their jobs are repetitious and tiring, and the process and procedures the agents are supposed to follow constantly change. Moreover, there are significant individual differences between agents in their intelligence, personality, motivations, etc. which all affect performance. Despite the large amount of money call centers have spent over decades trying to reduce between-agent variation, the problem is still so prevalent that one large study of customer interactions with call centers found that a customer's experience was completely a function of the quality of the agent who happened to answer the phone. Therefore, the most significant benefit of agent-assisted automation may prove to be in how the automation error-proofs or poka-yoke the process and ensures that something that needs to be done or said happens every time. Properly implemented, the between-agent variation for whatever step of the process the automation is applied to may be able to be reduced to near zero. This is especially important in a collection agency whose processes and procedures are closely regulated by the Fair Debt Collection Practices Act.

    Read more →
  • Comparison of user features of messaging platforms

    Comparison of user features of messaging platforms

    Comparison of user features of messaging platforms refers to a comparison of all the various user features of various electronic instant messaging platforms. This includes a wide variety of resources; it includes standalone apps, platforms within websites, computer software, and various internal functions available on specific devices, such as iMessage for iPhones. This entry includes only the features and functions that shape the user experience for such apps. A comparison of the underlying system components, programming aspects, and other internal technical information, is outside the scope of this entry. == Overview and background == Instant messaging technology is a type of online chat that offers real-time text transmission over the Internet. A LAN messenger operates in a similar way over a local area network. Short messages are typically transmitted between two parties when each user chooses to complete a thought and select "send". Some IM applications can use push technology to provide real-time text, which transmits messages character by character, as they are composed. More advanced instant messaging can add file transfer, clickable hyperlinks, Voice over IP, or video chat. Non-IM types of chat include multicast transmission, usually referred to as "chat rooms", where participants might be anonymous or might be previously known to each other (for example collaborators on a project that is using chat to facilitate communication). Instant messaging systems tend to facilitate connections between specified known users (often using a contact list also known as a "buddy list" or "friend list"). Depending on the IM protocol, the technical architecture can be peer-to-peer (direct point-to-point transmission) or client-server (an Instant message service center retransmits messages from the sender to the communication device). By 2010, instant messaging over the Web was in sharp decline, in favor of messaging features on social networks. The most popular IM platforms were terminated, such as AIM which closed down and Windows Live Messenger which merged into Skype. Instant messaging has since seen a revival in popularity in the form of "messaging apps" (usually on mobile devices) which by 2014 had more users than social networks. As of 2010, social networking providers often offer IM abilities. Facebook Chat is a form of instant messaging, and Twitter can be thought of as a Web 2.0 instant messaging system. Similar server-side chat features are part of most dating websites, such as OkCupid or PlentyofFish. The spread of smartphones and similar devices in the late 2000s also caused increased competition with conventional instant messaging, by making text messaging services still more ubiquitous. Many instant messaging services offer video calling features, voice over IP and web conferencing services. Web conferencing services can integrate both video calling and instant messaging abilities. Some instant messaging companies are also offering desktop sharing, IP radio, and IPTV to the voice and video features. The term "Instant Messenger" is a service mark of Time Warner and may not be used in software not affiliated with AOL in the United States. For this reason, in April 2007, the instant messaging client formerly named Gaim (or gaim) announced that they would be renamed "Pidgin". In the 2010s, more people started to use messaging apps on modern computers and devices like WhatsApp, WeChat, Viber, Facebook Messenger, Telegram, Signal and Line rather than instant messaging on computers like AIM and Windows Live Messenger. For example, WhatsApp was founded in 2009, and Facebook acquired in 2014, by which time it already had half a billion users. === Concepts === ==== Backchannel ==== Backchannel is the practice of using networked computers to maintain a real-time online conversation alongside the primary group activity or live spoken remarks. The term was coined in the field of linguistics to describe listeners' behaviours during verbal communication. (See Backchannel (linguistics).) The term "backchannel" generally refers to online conversation about the conference topic or speaker. Occasionally backchannel provides audience members a chance to fact-check the presentation. First growing in popularity at technology conferences, backchannel is increasingly a factor in education where WiFi connections and laptop computers allow participants to use ordinary chat like IRC or AIM to actively communicate during presentation. More recent research include works where the backchannel is brought publicly visible, such as the ClassCommons, backchan.nl and Fragmented Social Mirror. Twitter is also widely used today by audiences to create backchannels during broadcasting of content or at conferences. For example, television drama, other forms of entertainment and magazine programs. This practice is often also called live tweeting. Many conferences nowadays also have a hashtag that can be used by the participants to share notes and experiences; furthermore such hashtags can be user generated. == Features == Various platforms and apps are distinguished by their strengths and features in regards to specific functions. === Group messaging === === Official channels === Some apps include a feature known as "official channels" which allows companies, especially news media outlets, publications, and other mass media companies, to offer an official channel, which users can join, and thereby receive regular updates, published articles, or news updates from companies or news outlets. Two apps which have a large amount of such channels available are Line and Telegram. === Video group calls === == Basic default platforms == Basic platforms which are common across entire categories of mobile devices, computers, or operating systems. === SMS === SMS (short message service) is a text messaging service component of most telephone, Internet, and mobile device systems. It uses standardized communication protocols to enable mobile devices to exchange short text messages. An intermediary service can facilitate a text-to-voice conversion to be sent to landlines. SMS, as used on modern devices, originated from radio telegraphy in radio memo pagers that used standardized phone protocols. These were defined in 1985 as part of the Global System for Mobile Communications (GSM) series of standards. The first test SMS message was sent on December 3, 1992, when Neil Papwort, a test engineer for Sema Group, used a personal computer to send "Merry Christmas" to the phone of colleague Richard Jarvis. It commercially rolled out to many cellular networks that decade. SMS became hugely popular worldwide as a way of text communication. By the end of 2010, SMS was the most widely used data application, with an estimated 3.5 billion active users, or about 80% of all mobile phone subscribers. The protocols allowed users to send and receive messages of up to 160 characters (when entirely alpha-numeric) to and from GSM mobiles. Although most SMS messages are sent from one mobile phone to another, support for the service has expanded to include other mobile technologies, such as ANSI CDMA networks and Digital AMPS. Mobile marketing, a type of direct marketing, uses SMS. According to a 2018 market research report the global SMS messaging business was estimated to be worth over US$100 billion, accounting for almost 50 percent of all the revenue generated by mobile messaging. A Flash SMS is a type of SMS that appears directly on the main screen without user interaction and is not automatically stored in the inbox. It can be useful in emergencies, such as a fire alarm or cases of confidentiality, as in delivering one-time passwords. ==== Threaded SMS format ==== Threaded SMS is a visual styling orientation of SMS message history that arranges messages to and from a contact in chronological order on a single screen. It was first invented by a developer working to implement the SMS client for the BlackBerry, who was looking to make use of the blank screen left below the message on a device with a larger screen capable of displaying far more than the usual 160 characters, and was inspired by threaded Reply conversations in email. Visually, this style of representation provides a back-and-forth chat-like history for each individual contact. Hierarchical-threading at the conversation-level (as typical in blogs and on-line messaging boards) is not widely supported by SMS messaging clients. This limitation is due to the fact that there is no session identifier or subject-line passed back and forth between sent and received messages in the header data (as specified by SMS protocol) from which the client device can properly thread an incoming message to a specific dialogue, or even to a specific message within a dialogue. Most smart phone text-messaging-clients are able to create some contextual threading of "group messages" which narrows the context of the thread around the common interests shared by

    Read more →
  • Amaryllo

    Amaryllo

    Amaryllo Inc. is a multinational company founded in Amsterdam, the Netherlands, and now headquartered in the United States. It operates as a cloud service platform, providing cloud storage and cloud computing solutions to enterprises and brand companies. Amaryllo began with Skype IP camera development, pioneering biometric robotic technologies, encrypted P2P network, and secure cloud storage. Amaryllo was founded by Band of Angels member, Marcus Yang to develop patents for a new type of robotic cameras that is claimed to "talk, hear, sense, recognize human faces, and track intruders". It also claims to have made the world's first security robot based on the WebRTC protocol, Icam PRO FHD, and won the 2015 CES Best of Innovation Award under Embedded Technology category. Its home security robots claim to employ 256-bit encryption and run on the WebRTC protocol. Amaryllo products are sold in over 100 Countries across 6 Continents. == History == Amaryllo revealed its first smart home security products at Internationale Funkausstellung Berlin (IFA) 2013 with a Skype-enabled IP camera called iCam HD. Amaryllo announced its second Skype-certified smart home product, iBabi HD, at CES 2014. The company was chosen as a "Cool Vendor" by Gartner in Connected Home 2014. Amaryllo introduced WebRTC-based smart home products after Microsoft terminated embedded Skype services in mid 2014. Since then, Amaryllo has been developing camera robots with auto-tracking and facial recognition technologies. Its camera robots, ATOM AR3 and ATOM AR3S, were introduced in late 2016. It focuses on wired and wireless technology based on AI services. == Cloud Service Platform == Amaryllo offers prepaid cloud storage through digital codes and gift cards, distributed via InComm Payments, Blackhawk Network, and other partners. It provides high-performance cloud computing service through Rescale partnership. Amaryllo provides free cameras under an annual cloud storage subscription on its website. == Global Supercomputing Network (GSN) == The Global Supercomputing Network (GSN) is a distributed high-performance computing (HPC) platform developed by Amaryllo. The network is designed to provide scalable Infrastructure as a Service (IaaS) by connecting a global array of data centers to offer GPU computing resources for specialized industrial and scientific applications. === Architecture and Technology === GSN operates as a decentralized distributed network of servers rather than a single centralized supercomputer. The platform integrates an artificial intelligence assistant named Genie, also developed by Amaryllo. Genie's primary function is to manage computing allocation, helping users identify and connect to available resources across the network’s various nodes based on the specific requirements of their tasks. === Services === The network primarily focuses on the rental of GPU processing resources, catering to fields that require massive parallel processing capabilities, including: Artificial Intelligence and Machine Learning: Training large language models (LLMs) and neural networks. Scientific Simulations: Executing complex calculations in physics, chemistry, and bioinformatics. Data Analytics: Processing large-scale datasets. By utilizing a rental model, GSN allows organizations to access high-end hardware without the capital expenditure associated with purchasing and maintaining physical server infrastructure. === Infrastructure and Partnerships === The network’s physical footprint is expanded through strategic partnerships with data center operators. GSN collaborates with MettaDC and Cyber DC to provide colocation services. These partnerships facilitate the deployment of Nvidia server clusters within secure, Tier-rated facilities, ensuring high availability and connectivity for GSN users. == Official Brand Licensee of HP == Amaryllo Inc. is an official licensee of HP Inc., managing both B2B and B2C cloud services under the HP brand. Through this partnership, Amaryllo offers a range of secure and scalable cloud solutions, including HP Cloud, which provides subscription and one-time payment storage for reliable data backup and storage for individuals, families, and businesses. HP Cloud employs cloud computing technologies to create smart albums for users.

    Read more →
  • Image warping

    Image warping

    Image warping is the process of digitally manipulating an image such that any shapes portrayed in the image have been significantly distorted. Warping may be used for correcting image distortion as well as for creative purposes (e.g., morphing). The same techniques are equally applicable to video. While an image can be transformed in various ways, pure warping means that points are mapped to points without changing the colors. This can be based mathematically on any function from (part of) the plane to the plane. If the function is injective the original can be reconstructed. If the function is a bijection any image can be inversely transformed. Some methods are: Images may be distorted through simulation of optical aberrations. Images may be viewed as if they had been projected onto a curved or mirrored surface. (This is often seen in ray traced images.) Images can be partitioned into image polygons and each polygon distorted. Images can be distorted using morphing. The most obvious approach to transforming a digital image is the forward mapping. This applies the transform directly to the source image, typically generating unevenly-spaced points that will then be interpolated to generate the required regularly-spaced pixels. However, for injective transforms reverse mapping is also available. This applies the inverse transform to the target pixels to find the unevenly-spaced locations in the source image that contribute to them. Estimating them from source image pixels will require interpolation of the source image. To work out what kind of warping has taken place between consecutive images, one can use optical flow estimation techniques. == Image warping toolbox == ImWIP is an open-source, image warping tool for modeling deformation and motion in digital images, which contains differentiable image warping operators, together with their exact adjoints and derivatives.

    Read more →
  • Multi-focus image fusion

    Multi-focus image fusion

    Multi-focus image fusion is a multiple image compression technique using input images with different focus depths to make one output image that preserves all information. == Overview == The main idea of image fusion is gathering important and the essential information from the input images into one single image which ideally has all of the information of the input images. The research history of image fusion spans over 30 years and many scientific papers. Image fusion generally has two aspects: image fusion methods and objective evaluation metrics. In visual sensor networks (VSN), sensors are cameras which record images and video sequences. In many applications of VSN, a camera can't give a perfect illustration including all details of the scene. This is because of the limited depth of focus of the optical lens of cameras. Therefore, just the object located in the focal length of camera is focused and clear, and other parts of the image are blurred. VSN captures images with different depths of focus using several cameras. Due to the large amount of data generated by cameras compared to other sensors such as pressure and temperature sensors and some limitations of bandwidth, energy consumption and processing time, it is essential to process the local input images to decrease the amount of transmitted data. == Multi-Focus image fusion in the spatial domain == Huang and Jing have reviewed and applied several focus measurements in the spatial domain for the multi-focus image fusion process, suitable for real-time applications. They mentioned some focus measurements including variance, energy of image gradient (EOG), Tenenbaum's algorithm (Tenengrad), energy of Laplacian (EOL), sum-modified-Laplacian (SML), and spatial frequency (SF). Their experiments showed that EOL gave better results than other methods like variance and spatial frequency. == Multi-Focus image fusion in multi-scale transform and DCT domain == Image fusion based on the multi-scale transform is the most commonly used and promising technique. Laplacian pyramid transform, gradient pyramid-based transform, morphological pyramid transform and the premier ones, discrete wavelet transform, shift-invariant wavelet transform (SIDWT), and discrete cosine harmonic wavelet transform (DCHWT) are some examples of image fusion methods based on multi-scale transform. These methods are complex and have some limitations e.g. processing time and energy consumption. For example, multi-focus image fusion methods based on DWT require a lot of convolution operations, so they take more time and energy to process. Therefore, most methods in multi-scale transform are not suitable for real-time applications. Moreover, these methods are not very successful along edges, due to the wavelet transform process missing the edges of the image. They create ringing artefacts in the output image and reduce its quality. Due to the aforementioned problems in the multi-scale transform methods, researchers are interested in multi-focus image fusion in the DCT domain. DCT-based methods are more efficient in terms of transmission and archiving images coded in Joint Photographic Experts Group (JPEG) standard to the upper node in the VSN agent. A JPEG system consists of a pair of an encoder and a decoder. In the encoder, images are divided into non-overlapping 8×8 blocks, and the DCT coefficients are calculated for each. Since the quantization of DCT coefficients is a lossy process, many of the small-valued DCT coefficients are quantized to zero, which corresponds to high frequencies. DCT-based image fusion algorithms work better when the multi-focus image fusion methods are applied in the compressed domain. In addition, in the spatial-based methods, the input images must be decoded and then transferred to the spatial domain. After implementation of the image fusion operations, the output fused images must again be encoded. DCT domain-based methods do not require complex and time-consuming consecutive decoding and encoding operations. Therefore, the image fusion methods based on DCT domain operate with much less energy and processing time. Recently, a lot of research has been carried out in the DCT domain. DCT+Variance, DCT+Corr_Eng, DCT+EOL, and DCT+VOL are some prominent examples of DCT based methods.

    Read more →
  • Transfer function matrix

    Transfer function matrix

    In control system theory, and various branches of engineering, a transfer function matrix, or just transfer matrix is a generalisation of the transfer functions of single-input single-output (SISO) systems to multiple-input and multiple-output (MIMO) systems. The matrix relates the outputs of the system to its inputs. It is a particularly useful construction for linear time-invariant (LTI) systems because it can be expressed in terms of the s-plane. In some systems, especially ones consisting entirely of passive components, it can be ambiguous which variables are inputs and which are outputs. In electrical engineering, a common scheme is to gather all the voltage variables on one side and all the current variables on the other regardless of which are inputs or outputs. This results in all the elements of the transfer matrix being in units of impedance. The concept of impedance (and hence impedance matrices) has been borrowed into other energy domains by analogy, especially mechanics and acoustics. Many control systems span several different energy domains. This requires transfer matrices with elements in mixed units. This is needed both to describe transducers that make connections between domains and to describe the system as a whole. If the matrix is to properly model energy flows in the system, compatible variables must be chosen to allow this. == General == A MIMO system with m outputs and n inputs is represented by a m × n matrix. Each entry in the matrix is in the form of a transfer function relating an output to an input. For example, for a three-input, two-output system, one might write, [ y 1 y 2 ] = [ g 11 g 12 g 13 g 21 g 22 g 23 ] [ u 1 u 2 u 3 ] {\displaystyle {\begin{bmatrix}y_{1}\\y_{2}\end{bmatrix}}={\begin{bmatrix}g_{11}&g_{12}&g_{13}\\g_{21}&g_{22}&g_{23}\end{bmatrix}}{\begin{bmatrix}u_{1}\\u_{2}\\u_{3}\end{bmatrix}}} where the un are the inputs, the ym are the outputs, and the gmn are the transfer functions. This may be written more succinctly in matrix operator notation as, Y = G U {\displaystyle \mathbf {Y} =\mathbf {G} \mathbf {U} } where Y is a column vector of the outputs, G is a matrix of the transfer functions, and U is a column vector of the inputs. In many cases, the system under consideration is a linear time-invariant (LTI) system. In such cases, it is convenient to express the transfer matrix in terms of the Laplace transform (in the case of continuous time variables) or the z-transform (in the case of discrete time variables) of the variables. This may be indicated by writing, for instance, Y ( s ) = G ( s ) U ( s ) {\displaystyle \mathbf {Y} (s)=\mathbf {G} (s)\mathbf {U} (s)} which indicates that the variables and matrix are in terms of s, the complex frequency variable of the s-plane arising from Laplace transforms, rather than time. The examples in this article are all assumed to be in this form, although that is not explicitly indicated for brevity. For discrete time systems s is replaced by z from the z-transform, but this makes no difference to subsequent analysis. The matrix is particularly useful when it is a proper rational matrix, that is, all its elements are proper rational functions. In this case, the state-space representation can be applied. In systems engineering, the overall system transfer matrix G (s) is decomposed into two parts: H (s) representing the system being controlled, and C(s) representing the control system. C (s) takes as its inputs the inputs of G (s) and the outputs of H (s). The outputs of C (s) form the inputs for H (s). == Electrical systems == In electrical systems, it is often the case that the distinction between input and output variables is ambiguous. They can be either, depending on circumstance and point of view. In such cases, the concept of port (a place where energy is transferred from one system to another) can be more useful than input and output. It is customary to define two variables for each port (p): the voltage across it (Vp) and the current entering it (Ip). For instance, the transfer matrix of a two-port network can be defined as follows, [ V 1 V 2 ] = [ z 11 z 12 z 21 z 22 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\\\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} where the zmn are called the impedance parameters, or z-parameters. They are so-called because they are in units of impedance and relate port currents to a port voltage. The z-parameters are not the only way that transfer matrices are defined for two-port networks. Six basic matrices relate voltages and currents, each with advantages for particular system network topologies. However, only two of these can be extended beyond two ports to an arbitrary number of ports. These two are the z-parameters and their inverse, the admittance parameters or y-parameters. To understand the relationship between port voltages and currents and inputs and outputs, consider the simple voltage divider circuit. If we only wish to consider the output voltage (V2) resulting from applying the input voltage (V1) then the transfer function can be expressed as, [ V 2 ] = [ R 2 R 1 + R 2 ] [ V 1 ] {\displaystyle {\begin{bmatrix}V_{2}\end{bmatrix}}={\begin{bmatrix}{\dfrac {R_{2}}{R_{1}+R_{2}}}\end{bmatrix}}{\begin{bmatrix}V_{1}\end{bmatrix}}} which can be considered the trivial case of a 1×1 transfer matrix. The expression correctly predicts the output voltage if there is no current leaving port 2, but is increasingly inaccurate as the load increases. If, however, we attempt to use the circuit in reverse, driving it with a voltage at port 2 and calculate the resulting voltage at port 1 the expression gives completely the wrong result even with no load on port 1. It predicts a greater voltage at port 1 than was applied at port 2, an impossibility with a purely resistive circuit like this one. To correctly predict the behaviour of the circuit, the currents entering or leaving the ports must also be taken into account, which is what the transfer matrix does. The impedance matrix for the voltage divider circuit is, [ V 1 V 2 ] = [ R 1 + R 2 R 2 R 2 R 2 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}R_{1}+R_{2}&R_{2}\\R_{2}&R_{2}\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} which fully describes its behaviour under all input and output conditions. At microwave frequencies, none of the transfer matrices based on port voltages and currents are convenient to use in practice. Voltage is difficult to measure directly, current next to impossible, and the open circuits and short circuits required by the measurement technique cannot be achieved with any accuracy. For waveguide implementations, circuit voltage and current are entirely meaningless. Transfer matrices using different sorts of variables are used instead. These are the powers transmitted into, and reflected from a port, which are readily measured in the transmission line technology used in distributed-element circuits in the microwave band. The most well-known and widely used of these sorts of parameters is the scattering parameters, or s-parameters. == Mechanical and other systems == The concept of impedance can be extended into the mechanical and other domains through a mechanical-electrical analogy, hence the impedance parameters and other forms of 2-port network parameters can also be extended to the mechanical domain. To do this, an effort variable and a flow variable are made analogues of voltage and current, respectively. For mechanical systems under translation these variables are force and velocity respectively. Expressing the behaviour of a mechanical component as a two-port or multi-port with a transfer matrix is a useful thing to do because, like electrical circuits, the component can often be operated in reverse and its behaviour is dependent on the loads at the inputs and outputs. For instance, a gear train is often characterised simply by its gear ratio, a SISO transfer function. However, the gearbox output shaft can be driven around to turn the input shaft, requiring a MIMO analysis. In this example, the effort and flow variables are torque T and angular velocity ω, respectively. The transfer matrix in terms of z-parameters will look like, [ T 1 T 2 ] = [ z 11 z 12 z 21 z 22 ] [ ω 1 ω 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\T_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\end{bmatrix}}{\begin{bmatrix}\omega _{1}\\\omega _{2}\end{bmatrix}}} However, the z-parameters are not necessarily the most convenient for characterising gear trains. A gear train is the analogue of an electrical transformer and the h-parameters (hybrid parameters) better describe transformers because they directly include the turns ratios (the analogue of gear ratios). The gearbox transfer matrix in h-parameter format is, [ T 1 ω 2 ] = [ h 11 h 12 h 21 h 22 ] [ ω 1 T 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\\omega _{2}\end{bm

    Read more →
  • Feature hashing

    Feature hashing

    In machine learning, feature hashing, also known as the hashing trick (by analogy to the kernel trick), is a fast and space-efficient way of vectorizing features, i.e. turning arbitrary features into indices in a vector or matrix. It works by applying a hash function to the features and using their hash values as indices directly (after a modulo operation), rather than looking the indices up in an associative array. In addition to its use for encoding non-numeric values, feature hashing can also be used for dimensionality reduction. This trick is often attributed to Weinberger et al. (2009), but there exists a much earlier description of this method published by John Moody in 1989. == Motivation == === Motivating example === In a typical document classification task, the input to the machine learning algorithm (both during learning and classification) is free text. From this, a bag of words (BOW) representation is constructed: the individual tokens are extracted and counted, and each distinct token in the training set defines a feature (independent variable) of each of the documents in both the training and test sets. Machine learning algorithms, however, are typically defined in terms of numerical vectors. Therefore, the bags of words for a set of documents is regarded as a term-document matrix where each row is a single document, and each column is a single feature/word; the entry i, j in such a matrix captures the frequency (or weight) of the j'th term of the vocabulary in document i. (An alternative convention swaps the rows and columns of the matrix, but this difference is immaterial.) Typically, these vectors are extremely sparse—according to Zipf's law. The common approach is to construct, at learning time or prior to that, a dictionary representation of the vocabulary of the training set, and use that to map words to indices. Hash tables and tries are common candidates for dictionary implementation. E.g., the three documents John likes to watch movies. Mary likes movies too. John also likes football. can be converted, using the dictionary to the term-document matrix ( John likes to watch movies Mary too also football 1 1 1 1 1 0 0 0 0 0 1 0 0 1 1 1 0 0 1 1 0 0 0 0 0 1 1 ) {\displaystyle {\begin{pmatrix}{\textrm {John}}&{\textrm {likes}}&{\textrm {to}}&{\textrm {watch}}&{\textrm {movies}}&{\textrm {Mary}}&{\textrm {too}}&{\textrm {also}}&{\textrm {football}}\\1&1&1&1&1&0&0&0&0\\0&1&0&0&1&1&1&0&0\\1&1&0&0&0&0&0&1&1\end{pmatrix}}} (Punctuation was removed, as is usual in document classification and clustering.) The problem with this process is that such dictionaries take up a large amount of storage space and grow in size as the training set grows. On the contrary, if the vocabulary is kept fixed and not increased with a growing training set, an adversary may try to invent new words or misspellings that are not in the stored vocabulary so as to circumvent a machine learned filter. To address this challenge, Yahoo! Research attempted to use feature hashing for their spam filters. Note that the hashing trick isn't limited to text classification and similar tasks at the document level, but can be applied to any problem that involves large (perhaps unbounded) numbers of features. === Mathematical motivation === Mathematically, a token is an element t {\displaystyle t} in a finite (or countably infinite) set T {\displaystyle T} . Suppose we only need to process a finite corpus, then we can put all tokens appearing in the corpus into T {\displaystyle T} , meaning that T {\displaystyle T} is finite. However, suppose we want to process all possible words made of the English letters, then T {\displaystyle T} is countably infinite. Most neural networks can only operate on real vector inputs, so we must construct a "dictionary" function ϕ : T → R n {\displaystyle \phi :T\to \mathbb {R} ^{n}} . When T {\displaystyle T} is finite, of size | T | = m ≤ n {\displaystyle |T|=m\leq n} , then we can use one-hot encoding to map it into R n {\displaystyle \mathbb {R} ^{n}} . First, arbitrarily enumerate T = { t 1 , t 2 , . . , t m } {\displaystyle T=\{t_{1},t_{2},..,t_{m}\}} , then define ϕ ( t i ) = e i {\displaystyle \phi (t_{i})=e_{i}} . In other words, we assign a unique index i {\displaystyle i} to each token, then map the token with index i {\displaystyle i} to the unit basis vector e i {\displaystyle e_{i}} . One-hot encoding is easy to interpret, but it requires one to maintain the arbitrary enumeration of T {\displaystyle T} . Given a token t ∈ T {\displaystyle t\in T} , to compute ϕ ( t ) {\displaystyle \phi (t)} , we must find out the index i {\displaystyle i} of the token t {\displaystyle t} . Thus, to implement ϕ {\displaystyle \phi } efficiently, we need a fast-to-compute bijection h : T → { 1 , . . . , m } {\displaystyle h:T\to \{1,...,m\}} , then we have ϕ ( t ) = e h ( t ) {\displaystyle \phi (t)=e_{h(t)}} . In fact, we can relax the requirement slightly: It suffices to have a fast-to-compute injection h : T → { 1 , . . . , n } {\displaystyle h:T\to \{1,...,n\}} , then use ϕ ( t ) = e h ( t ) {\displaystyle \phi (t)=e_{h(t)}} . In practice, there is no simple way to construct an efficient injection h : T → { 1 , . . . , n } {\displaystyle h:T\to \{1,...,n\}} . However, we do not need a strict injection, but only an approximate injection. That is, when t ≠ t ′ {\displaystyle t\neq t'} , we should probably have h ( t ) ≠ h ( t ′ ) {\displaystyle h(t)\neq h(t')} , so that probably ϕ ( t ) ≠ ϕ ( t ′ ) {\displaystyle \phi (t)\neq \phi (t')} . At this point, we have just specified that h {\displaystyle h} should be a hashing function. Thus we reach the idea of feature hashing. == Algorithms == === Feature hashing (Weinberger et al. 2009) === The basic feature hashing algorithm presented in (Weinberger et al. 2009) is defined as follows. First, one specifies two hash functions: the kernel hash h : T → { 1 , 2 , . . . , n } {\displaystyle h:T\to \{1,2,...,n\}} , and the sign hash ζ : T → { − 1 , + 1 } {\displaystyle \zeta :T\to \{-1,+1\}} . Next, one defines the feature hashing function: ϕ : T → R n , ϕ ( t ) = ζ ( t ) e h ( t ) {\displaystyle \phi :T\to \mathbb {R} ^{n},\quad \phi (t)=\zeta (t)e_{h(t)}} Finally, extend this feature hashing function to strings of tokens by ϕ : T ∗ → R n , ϕ ( t 1 , . . . , t k ) = ∑ j = 1 k ϕ ( t j ) {\displaystyle \phi :T^{}\to \mathbb {R} ^{n},\quad \phi (t_{1},...,t_{k})=\sum _{j=1}^{k}\phi (t_{j})} where T ∗ {\displaystyle T^{}} is the set of all finite strings consisting of tokens in T {\displaystyle T} . Equivalently, ϕ ( t 1 , . . . , t k ) = ∑ j = 1 k ζ ( t j ) e h ( t j ) = ∑ i = 1 n ( ∑ j : h ( t j ) = i ζ ( t j ) ) e i {\displaystyle \phi (t_{1},...,t_{k})=\sum _{j=1}^{k}\zeta (t_{j})e_{h(t_{j})}=\sum _{i=1}^{n}\left(\sum _{j:h(t_{j})=i}\zeta (t_{j})\right)e_{i}} ==== Geometric properties ==== We want to say something about the geometric property of ϕ {\displaystyle \phi } , but T {\displaystyle T} , by itself, is just a set of tokens, we cannot impose a geometric structure on it except the discrete topology, which is generated by the discrete metric. To make it nicer, we lift it to T → R T {\displaystyle T\to \mathbb {R} ^{T}} , and lift ϕ {\displaystyle \phi } from ϕ : T → R n {\displaystyle \phi :T\to \mathbb {R} ^{n}} to ϕ : R T → R n {\displaystyle \phi :\mathbb {R} ^{T}\to \mathbb {R} ^{n}} by linear extension: ϕ ( ( x t ) t ∈ T ) = ∑ t ∈ T x t ζ ( t ) e h ( t ) = ∑ i = 1 n ( ∑ t : h ( t ) = i x t ζ ( t ) ) e i {\displaystyle \phi ((x_{t})_{t\in T})=\sum _{t\in T}x_{t}\zeta (t)e_{h(t)}=\sum _{i=1}^{n}\left(\sum _{t:h(t)=i}x_{t}\zeta (t)\right)e_{i}} There is an infinite sum there, which must be handled at once. There are essentially only two ways to handle infinities. One may impose a metric, then take its completion, to allow well-behaved infinite sums, or one may demand that nothing is actually infinite, only potentially so. Here, we go for the potential-infinity way, by restricting R T {\displaystyle \mathbb {R} ^{T}} to contain only vectors with finite support: ∀ ( x t ) t ∈ T ∈ R T {\displaystyle \forall (x_{t})_{t\in T}\in \mathbb {R} ^{T}} , only finitely many entries of ( x t ) t ∈ T {\displaystyle (x_{t})_{t\in T}} are nonzero. Define an inner product on R T {\displaystyle \mathbb {R} ^{T}} in the obvious way: ⟨ e t , e t ′ ⟩ = { 1 , if t = t ′ , 0 , else. ⟨ x , x ′ ⟩ = ∑ t , t ′ ∈ T x t x t ′ ⟨ e t , e t ′ ⟩ {\displaystyle \langle e_{t},e_{t'}\rangle ={\begin{cases}1,{\text{ if }}t=t',\\0,{\text{ else.}}\end{cases}}\quad \langle x,x'\rangle =\sum _{t,t'\in T}x_{t}x_{t'}\langle e_{t},e_{t'}\rangle } As a side note, if T {\displaystyle T} is infinite, then the inner product space R T {\displaystyle \mathbb {R} ^{T}} is not complete. Taking its completion would get us to a Hilbert space, which allows well-behaved infinite sums. Now we have an inner product space, with enough structure to describe the geometry of the feature hashing function ϕ : R T → R n {\displaystyle \phi :\ma

    Read more →
  • Conference app

    Conference app

    A conference app, also known as an event app or meeting app, is a mobile app developed to help attendees and meeting planners manage their conference experience. It typically includes conference proceedings and venue information, allowing users to create personalized schedules and engage with other users. A conference app can be a native app or web-based. In recent years, conference apps have gained in popularity as a sustainable solution for event management by reducing paper produced by printed materials. Advanced features often include real-time notifications for updates or changes, integration with virtual meeting platforms for hybrid or fully online events, and analytics tools for organizers to measure attendance and engagement. Additionally, some apps support sponsorship and exhibitor features, enabling businesses to showcase their products or services directly within the app.

    Read more →
  • Optical sorting

    Optical sorting

    Optical sorting (sometimes called digital sorting) is the automated process of sorting solid products using cameras and/or lasers. Depending on the types of sensors used and the software-driven intelligence of the image processing system, optical sorters can recognize an object's color, size, shape, structural properties and chemical composition. The sorter compares objects to user-defined accept/reject criteria to identify and remove defective products and foreign material (FM) from the production line, or to separate product of different grades or types of materials. Optical sorters are in widespread use in the food industry worldwide, with the highest adoption in processing harvested foods such as potatoes, fruits, vegetables and nuts where it achieves non-destructive, 100 percent inspection in-line at full production volumes. The technology is also used in pharmaceutical manufacturing and nutraceutical manufacturing, tobacco processing, waste recycling and other industries. Compared to manual sorting, which is subjective and inconsistent, optical sorting helps improve product quality, maximize throughput and increase yields while reducing labor costs. == History == Optical sorting is an idea that first came out of the desire to automate industrial sorting of agricultural goods like fruits and vegetables. Before automated optical sorting technology was conceived in the 1930s, companies like Unitec were producing wooden machinery to assist in the mechanical sorting of fruit processing. In 1931, a company known as “the Electric Sorting Company” was incorporated and began the creation of the world’s first color sorters, which were being installed and used in Michigan’s bean industry by 1932. In 1937, optical sorting technology had advanced to allow for systems based on a two-color principle of selection. The next few decades saw the installation of new and improved sorting mechanisms, like gravity feed systems and the implementation of optical sorting in more agricultural industries. In the late 1960s, optical sorting began to be implemented to new industries beyond agriculture, like the sorting of ferrous and non-ferrous metals. By the 1990s, optical sorting was being used heavily in the sorting of solid wastes. With the large technological revolution happening in the late 1990s and early 2000s, optical sorters were being made more efficient via the implementation of new optical sensors, like CCD, UV, and IR cameras. Today, optical sorting is used in a wide variety of industries and, as such, is implemented with a varying selection of mechanisms to assist in that specific sorter’s task. == The sorting system == In general, optical sorters feature four major components: the feed system, the optical system, image processing software, and the separation system. The objective of the feed system is to spread products into a uniform monolayer so products are presented to the optical system evenly, without clumps, at a constant velocity. The optical system includes lights and sensors housed above and/or below the flow of the objects being inspected. The image processing system compares objects to user-defined accept/reject thresholds to classify objects and actuate the separation system. The separation system — usually compressed air for small products and mechanical devices for larger products, like whole potatoes — pinpoints objects while in-air and deflects the objects to remove into a reject chute while the good product continues along its normal trajectory. The ideal sorter to use depends on the application. Therefore, the product's characteristics and the user's objectives determine the ideal sensors, software-driven capabilities and mechanical platform. == Sensors == Optical sorters require a combination of lights and sensors to illuminate and capture images of the objects so the images can be processed. The processed images will determine if the material should be accepted or rejected. There are camera sorters, laser sorters and sorters that feature a combination of the two on one platform. Lights, cameras, lasers and laser sensors can be designed to function within visible light wavelengths as well as the infrared (IR) and ultraviolet (UV) spectrums. The optimal wavelengths for each application maximize the contrast between the objects to be separated. Cameras and laser sensors can differ in spatial resolution, with higher resolutions enabling the sorter to detect and remove smaller defects. === Cameras === Monochromatic cameras detect shades of gray from black to white and can be effective when sorting products with high-contrast defects. Sophisticated color cameras with high color resolution are capable of detecting millions of colors to better distinguish more subtle color defects. Trichromatic color cameras (also called three-channel cameras) divide light into three bands, which can include red, green and/or blue within the visible spectrum as well as IR and UV. The interaction of different materials with parts of the electromagnetic spectrum make these contrasts more evident than how they appear to the naked human eye. Coupled with intelligent software, sorters that feature cameras are capable of recognizing each object's color, size and shape; as well as the color, size, shape and location of a defect on a product. Some intelligent sorters even allow the user to define a defective product based on the total defective surface area of any given object. === Lasers === While cameras capture product information based primarily on material reflectance, lasers and their sensors are able to distinguish a material's structural properties along with their color. This structural property inspection allows lasers to detect a wide range of organic and inorganic foreign material such as insects, glass, metal, sticks, rocks and plastic; even if they are the same color as the good product. Lasers can be designed to operate within specific wavelengths of light; whether on the visible spectrum or beyond. For example, lasers can detect chlorophyll by stimulating fluorescence using specific wavelengths; which is a process that is very effective for removing foreign material from green vegetables. === Camera/laser combinations === Sorters equipped with cameras and lasers on one platform are generally capable of identifying the widest variety of attributes. Cameras are often better at recognizing color, size and shape while laser sensors identify differences in structural properties to maximize foreign material detection and removal. === Hyperspectral Imaging === Driven by the need to solve previously impossible sorting challenges, a new generation of sorters that feature multispectral and hyperspectral imaging Optical Sorters. Like trichromatic cameras, multispectral and hyperspectral cameras collect data from the electromagnetic spectrum. Unlike trichromatic cameras, which divide light into three bands, hyperspectral systems can divide light into hundreds of narrow bands over a continuous range that covers a vast portion of the electromagnetic spectrum. This opens the door for more detailed analysis that leads to a more consistent product. Using IR alone might detect some defects, but combining it with a broader range of the spectrum makes it more effective. Compared to the three data points per pixel collected by trichromatic cameras, hyperspectral cameras can collect hundreds of data points per pixel, which are combined to create a unique spectral signature (also called a fingerprint) for each object. When complemented by capable software intelligence, a hyperspectral sorter processes those fingerprints to enable sorting on the chemical composition of the product. This is an emerging area of chemometrics. == Software-driven intelligence == Once the sensors capture the object's response to the energy source, image processing is used to manipulate the raw data. The image processing extracts and categorizes information about specific features. The user then defines accept/reject thresholds that are used to determine what is good and bad in the raw data flow. The art and science of image processing lies in developing algorithms that maximize the effectiveness of the sorter while presenting a simple user-interface to the operator. Object-based recognition is a classic example of software-driven intelligence. It allows the user to define a defective product based on where a defect lies on the product and/or the total defective surface area of an object. It offers more control in defining a wider range of defective products. When used to control the sorter's ejection system, it can improve the accuracy of ejecting defective products. This improves product quality and increases yields. New software-driven capabilities are constantly being developed to address the specific needs of various applications. As computing hardware becomes more powerful, new software-driven advancements become possible. Some of these advancements enhance the effectivene

    Read more →
  • Irwin Sobel

    Irwin Sobel

    Irwin Sobel (born September 12, 1940) is a scientist and researcher in digital image processing. == Biography == Irwin Sobel was born in New York City. He graduated from MIT in 1961 and completed his Ph.D. research at the Stanford Artificial Intelligence Project (SAIL) with thesis Camera Models and Machine Perception. His Ph.D. advisor was Jerome A. Feldman. Starting in 1973, he spent nine years doing postdoctoral research at Columbia University. After 1982, he worked as a Senior Researcher at HP Labs. == Sobel operator == In 1968, Sobel gave a talk entitled "An Isotropic 3x3 Image Gradient Operator" at SAIL; this method became known as the Sobel operator. It was developed jointly with a colleague, Gary Feldman, also at SAIL.

    Read more →
  • ImageNet

    ImageNet

    The ImageNet project is a large visual database designed for use in visual object recognition software research. More than 14 million images have been hand-annotated by the project to indicate what objects are pictured and in at least one million of the images, bounding boxes are also provided. ImageNet contains more than 20,000 categories, with a typical category, such as "balloon" or "strawberry", consisting of several hundred images. The database of annotations of third-party image URLs is freely available directly from ImageNet, though the actual images are not owned by ImageNet. Since 2010, the ImageNet project runs an annual software contest, the ImageNet Large Scale Visual Recognition Challenge (ILSVRC), where software programs compete to correctly classify and detect objects and scenes. The challenge uses a "trimmed" list of one thousand non-overlapping classes. == History == AI researcher Fei-Fei Li began working on the idea for ImageNet in 2006. At a time when most AI research focused on models and algorithms, Li wanted to expand and improve the data available to train AI algorithms. In 2007, Li met with Princeton professor Christiane Fellbaum, one of the creators of WordNet, to discuss the project. As a result of this meeting, Li went on to build ImageNet starting from the roughly 22,000 nouns of WordNet and using many of its features. She was also inspired by a 1987 estimate that the average person recognizes roughly 30,000 different kinds of objects. As an assistant professor at Princeton, Li assembled a team of researchers to work on the ImageNet project. They used Amazon Mechanical Turk to help with the classification of images. Labeling started in July 2008 and ended in April 2010. It took 49K workers from 167 countries filtering and labeling over 160M candidate images. They had enough budget to have each of the 14 million images labelled three times. The original plan called for 10,000 images per category, for 40,000 categories at 400 million images, each verified 3 times. They found that humans can classify at most 2 images/sec. At this rate, it was estimated to take 19 human-years of labor (without rest). They presented their database for the first time as a poster at the 2009 Conference on Computer Vision and Pattern Recognition (CVPR) in Florida, titled "ImageNet: A Preview of a Large-scale Hierarchical Dataset". The poster was reused at Vision Sciences Society 2009. In 2009, Alex Berg suggested adding object localization as a task. Li approached PASCAL Visual Object Classes contest in 2009 for a collaboration. It resulted in the subsequent ImageNet Large Scale Visual Recognition Challenge starting in 2010, which has 1000 classes and object localization, as compared to PASCAL VOC which had just 20 classes and 19,737 images (in 2010). === Significance for deep learning === On 30 September 2012, a convolutional neural network (CNN) called AlexNet achieved a top-5 error of 15.3% in the ImageNet 2012 Challenge, more than 10.8 percentage points lower than that of the runner-up. Using convolutional neural networks was feasible due to the use of graphics processing units (GPUs) during training, an essential ingredient of the deep learning revolution. According to The Economist, "Suddenly people started to pay attention, not just within the AI community but across the technology industry as a whole." In 2015, AlexNet was outperformed by Microsoft's very deep CNN with over 100 layers, which won the ImageNet 2015 contest, having 3.57% error on the test set. Andrej Karpathy estimated in 2014 that with concentrated effort, he could reach 5.1% error rate, and ~10 people from his lab reached ~12-13% with less effort. It was estimated that with maximal effort, a human could reach 2.4%. == Dataset == ImageNet crowdsources its annotation process. Image-level annotations indicate the presence or absence of an object class in an image, such as "there are tigers in this image" or "there are no tigers in this image". Object-level annotations provide a bounding box around the (visible part of the) indicated object. ImageNet uses a variant of the broad WordNet schema to categorize objects, augmented with 120 categories of dog breeds to showcase fine-grained classification. In 2012, ImageNet was the world's largest academic user of Mechanical Turk. The average worker identified 50 images per minute. The original plan of the full ImageNet would have roughly 50M clean, diverse and full resolution images spread over approximately 50K synsets. This was not achieved. The summary statistics given on April 30, 2010: Total number of non-empty synsets: 21841 Total number of images: 14,197,122 Number of images with bounding box annotations: 1,034,908 Number of synsets with SIFT features: 1000 Number of images with SIFT features: 1.2 million === Categories === The categories of ImageNet were filtered from the WordNet concepts. Each concept, since it can contain multiple synonyms (for example, "kitty" and "young cat"), so each concept is called a "synonym set" or "synset". There were more than 100,000 synsets in WordNet 3.0, majority of them are nouns (80,000+). The ImageNet dataset filtered these to 21,841 synsets that are countable nouns that can be visually illustrated. Each synset in WordNet 3.0 has a "WordNet ID" (wnid), which is a concatenation of part of speech and an "offset" (a unique identifying number). Every wnid starts with "n" because ImageNet only includes nouns. For example, the wnid of synset "dog, domestic dog, Canis familiaris" is "n02084071". The categories in ImageNet fall into 9 levels, from level 1 (such as "mammal") to level 9 (such as "German shepherd"). === Image format === The images were scraped from online image search (Google, Picsearch, MSN, Yahoo, Flickr, etc) using synonyms in multiple languages. For example: German shepherd, German police dog, German shepherd dog, Alsatian, ovejero alemán, pastore tedesco, 德国牧羊犬. ImageNet consists of images in RGB format with varying resolutions. For example, in ImageNet 2012, "fish" category, the resolution ranges from 4288 x 2848 to 75 x 56. In machine learning, these are typically preprocessed into a standard constant resolution, and whitened, before further processing by neural networks. For example, in PyTorch, ImageNet images are by default normalized by dividing the pixel values so that they fall between 0 and 1, then subtracting by [0.485, 0.456, 0.406], then dividing by [0.229, 0.224, 0.225]. These are the mean and standard deviations for ImageNet, so this whitens the input data. === Labels and annotations === Each image is labelled with exactly one wnid. Dense SIFT features (raw SIFT descriptors, quantized codewords, and coordinates of each descriptor/codeword) for ImageNet-1K were available for download, designed for bag of visual words. The bounding boxes of objects were available for about 3000 popular synsets with on average 150 images in each synset. Furthermore, some images have attributes. They released 25 attributes for ~400 popular synsets: Color: black, blue, brown, gray, green, orange, pink, red, violet, white, yellow Pattern: spotted, striped Shape: long, round, rectangular, square Texture: furry, smooth, rough, shiny, metallic, vegetation, wooden, wet === ImageNet-21K === The full original dataset is referred to as ImageNet-21K. ImageNet-21k contains 14,197,122 images divided into 21,841 classes. Some papers round this up and name it ImageNet-22k. The full ImageNet-21k was released in Fall of 2011, as fall11_whole.tar. There is no official train-validation-test split for ImageNet-21k. Some classes contain only 1-10 samples, while others contain thousands. === ImageNet-1K === There are various subsets of the ImageNet dataset used in various context, sometimes referred to as "versions". One of the most highly used subsets of ImageNet is the "ImageNet Large Scale Visual Recognition Challenge (ILSVRC) 2012–2017 image classification and localization dataset". This is also referred to in the research literature as ImageNet-1K or ILSVRC2017, reflecting the original ILSVRC challenge that involved 1,000 classes. ImageNet-1K contains 1,281,167 training images, 50,000 validation images and 100,000 test images. Each category in ImageNet-1K is a leaf category, meaning that there are no child nodes below it, unlike ImageNet-21K. For example, in ImageNet-21K, there are some images categorized as simply "mammal", whereas in ImageNet-1K, there are only images categorized as things like "German shepherd", since there are no child-words below "German shepherd". === Later developments === In the WordNet they built ImageNet on, there were 2832 synsets in the "person" subtree. During 2018--2020 period, they removed the download of the ImageNet-21k as they went through extensive filtering in these person synsets. Out of these 2832 synsets, 1593 were deemed "potentially offensive". Out of the remaining 1239, 1081 were deemed not really "visual". The result was that only 158 syn

    Read more →
  • Optical sorting

    Optical sorting

    Optical sorting (sometimes called digital sorting) is the automated process of sorting solid products using cameras and/or lasers. Depending on the types of sensors used and the software-driven intelligence of the image processing system, optical sorters can recognize an object's color, size, shape, structural properties and chemical composition. The sorter compares objects to user-defined accept/reject criteria to identify and remove defective products and foreign material (FM) from the production line, or to separate product of different grades or types of materials. Optical sorters are in widespread use in the food industry worldwide, with the highest adoption in processing harvested foods such as potatoes, fruits, vegetables and nuts where it achieves non-destructive, 100 percent inspection in-line at full production volumes. The technology is also used in pharmaceutical manufacturing and nutraceutical manufacturing, tobacco processing, waste recycling and other industries. Compared to manual sorting, which is subjective and inconsistent, optical sorting helps improve product quality, maximize throughput and increase yields while reducing labor costs. == History == Optical sorting is an idea that first came out of the desire to automate industrial sorting of agricultural goods like fruits and vegetables. Before automated optical sorting technology was conceived in the 1930s, companies like Unitec were producing wooden machinery to assist in the mechanical sorting of fruit processing. In 1931, a company known as “the Electric Sorting Company” was incorporated and began the creation of the world’s first color sorters, which were being installed and used in Michigan’s bean industry by 1932. In 1937, optical sorting technology had advanced to allow for systems based on a two-color principle of selection. The next few decades saw the installation of new and improved sorting mechanisms, like gravity feed systems and the implementation of optical sorting in more agricultural industries. In the late 1960s, optical sorting began to be implemented to new industries beyond agriculture, like the sorting of ferrous and non-ferrous metals. By the 1990s, optical sorting was being used heavily in the sorting of solid wastes. With the large technological revolution happening in the late 1990s and early 2000s, optical sorters were being made more efficient via the implementation of new optical sensors, like CCD, UV, and IR cameras. Today, optical sorting is used in a wide variety of industries and, as such, is implemented with a varying selection of mechanisms to assist in that specific sorter’s task. == The sorting system == In general, optical sorters feature four major components: the feed system, the optical system, image processing software, and the separation system. The objective of the feed system is to spread products into a uniform monolayer so products are presented to the optical system evenly, without clumps, at a constant velocity. The optical system includes lights and sensors housed above and/or below the flow of the objects being inspected. The image processing system compares objects to user-defined accept/reject thresholds to classify objects and actuate the separation system. The separation system — usually compressed air for small products and mechanical devices for larger products, like whole potatoes — pinpoints objects while in-air and deflects the objects to remove into a reject chute while the good product continues along its normal trajectory. The ideal sorter to use depends on the application. Therefore, the product's characteristics and the user's objectives determine the ideal sensors, software-driven capabilities and mechanical platform. == Sensors == Optical sorters require a combination of lights and sensors to illuminate and capture images of the objects so the images can be processed. The processed images will determine if the material should be accepted or rejected. There are camera sorters, laser sorters and sorters that feature a combination of the two on one platform. Lights, cameras, lasers and laser sensors can be designed to function within visible light wavelengths as well as the infrared (IR) and ultraviolet (UV) spectrums. The optimal wavelengths for each application maximize the contrast between the objects to be separated. Cameras and laser sensors can differ in spatial resolution, with higher resolutions enabling the sorter to detect and remove smaller defects. === Cameras === Monochromatic cameras detect shades of gray from black to white and can be effective when sorting products with high-contrast defects. Sophisticated color cameras with high color resolution are capable of detecting millions of colors to better distinguish more subtle color defects. Trichromatic color cameras (also called three-channel cameras) divide light into three bands, which can include red, green and/or blue within the visible spectrum as well as IR and UV. The interaction of different materials with parts of the electromagnetic spectrum make these contrasts more evident than how they appear to the naked human eye. Coupled with intelligent software, sorters that feature cameras are capable of recognizing each object's color, size and shape; as well as the color, size, shape and location of a defect on a product. Some intelligent sorters even allow the user to define a defective product based on the total defective surface area of any given object. === Lasers === While cameras capture product information based primarily on material reflectance, lasers and their sensors are able to distinguish a material's structural properties along with their color. This structural property inspection allows lasers to detect a wide range of organic and inorganic foreign material such as insects, glass, metal, sticks, rocks and plastic; even if they are the same color as the good product. Lasers can be designed to operate within specific wavelengths of light; whether on the visible spectrum or beyond. For example, lasers can detect chlorophyll by stimulating fluorescence using specific wavelengths; which is a process that is very effective for removing foreign material from green vegetables. === Camera/laser combinations === Sorters equipped with cameras and lasers on one platform are generally capable of identifying the widest variety of attributes. Cameras are often better at recognizing color, size and shape while laser sensors identify differences in structural properties to maximize foreign material detection and removal. === Hyperspectral Imaging === Driven by the need to solve previously impossible sorting challenges, a new generation of sorters that feature multispectral and hyperspectral imaging Optical Sorters. Like trichromatic cameras, multispectral and hyperspectral cameras collect data from the electromagnetic spectrum. Unlike trichromatic cameras, which divide light into three bands, hyperspectral systems can divide light into hundreds of narrow bands over a continuous range that covers a vast portion of the electromagnetic spectrum. This opens the door for more detailed analysis that leads to a more consistent product. Using IR alone might detect some defects, but combining it with a broader range of the spectrum makes it more effective. Compared to the three data points per pixel collected by trichromatic cameras, hyperspectral cameras can collect hundreds of data points per pixel, which are combined to create a unique spectral signature (also called a fingerprint) for each object. When complemented by capable software intelligence, a hyperspectral sorter processes those fingerprints to enable sorting on the chemical composition of the product. This is an emerging area of chemometrics. == Software-driven intelligence == Once the sensors capture the object's response to the energy source, image processing is used to manipulate the raw data. The image processing extracts and categorizes information about specific features. The user then defines accept/reject thresholds that are used to determine what is good and bad in the raw data flow. The art and science of image processing lies in developing algorithms that maximize the effectiveness of the sorter while presenting a simple user-interface to the operator. Object-based recognition is a classic example of software-driven intelligence. It allows the user to define a defective product based on where a defect lies on the product and/or the total defective surface area of an object. It offers more control in defining a wider range of defective products. When used to control the sorter's ejection system, it can improve the accuracy of ejecting defective products. This improves product quality and increases yields. New software-driven capabilities are constantly being developed to address the specific needs of various applications. As computing hardware becomes more powerful, new software-driven advancements become possible. Some of these advancements enhance the effectivene

    Read more →
  • Adobe PhotoDeluxe

    Adobe PhotoDeluxe

    PhotoDeluxe was a consumer-oriented image editing software line published by Adobe Systems from 1996 until July 8, 2002. At that time it was replaced by Adobe's newly launched consumer-oriented image editing software Photoshop Elements. Adobe no longer provides technical support for the PhotoDeluxe software line. PhotoDeluxe had a range of image processing capabilities for the home photographer and image handler. These included removing red-eye, cropping, and adjusting brightness, contrast, and sharpness. It also included software to extract pictures from an image scanner. Among the functionality included was the ability to dynamically resize photos and export them in a wide range of formats. It also had a range of printing options including printing multiple copies of an image on the same page. It was often bundled free with Epson scanners or as free software with new computers. == Features == Despite the critical concerns regarding the quality of the setup, Photo Deluxe supports layering, blurs, sharpening, cloning, gradient fills, color and background switches, color variations, resizing options, and many other features. Another drawback of PhotoDeluxe was that it was designed for Mac computers, so working on Windows PC was a problem for those who were unable to customize their preferences. == Versions == === Adobe PhotoDeluxe 1.0 === The first version was released in 1996 for Windows and Macintosh computers. In one year, it sold over one million copies. === Adobe PhotoDeluxe 2.0 === The new version was released in 1997 and had added features such as a Clone Tool, red-eye removal, and sample templates for making posters, cards, and calendars. It also had new special effect features. === Adobe PhotoDeluxe 3.0 === The 3rd version was released in 1998. The new features included customizable clipart settings, the ability to import photos on the web, enhanced repair activities following Guided Activities, and Adobe Connectables to add new activities. === Adobe PhotoDeluxe Home Edition (4.0) === Version 4.0 was created by the makers of Photoshop. It had advanced abilities such as tools to add animation, voice, and music to a picture. It also had features to restore photos to their original position. == History == Adobe PhotoDeluxe 1.0 was released in 1996 for Macintosh computers, initially retailing for an MSRP of $49. The software did quite well, reportedly selling over a million copies by February of the next year, primarily due to bundles with companies like Apple and Hewlett-Packard. PhotoDeluxe was primarily advertised to consumers as a way to do basic photo manipulation, such as cropping and rotating images, or creating simple cards and calendars. PhotoDeluxe 2.0 was released in 1997, and was the last version of PhotoDeluxe that Adobe made that worked on Macs. PhotoDeluxe 2.0 became the "number one selling consumer photo-editing software product in the world." PhotoDeluxe 3.0 was released in 1998, where it was rebranded as "3.0 Home Edition", as Adobe released PhotoDeluxe Business Edition later that year for a higher price. PhotoDeluxe Home Edition, unofficially called PhotoDeluxe 4.0, was released in 1999 and was the last version of PhotoDeluxe to be released. Adobe officially cancelled PhotoDeluxe on July 8, 2002, citing the presence of Photoshop and Photoshop Elements, with support being officially cancelled in mid-2003. No version of PhotoDeluxe is compatible with Windows 10, rendering the program obsolete. == Pricing == All home versions of PhotoDeluxe retailed for an MSRP of $49. PhotoDeluxe 2.0 and onwards allowed users to upgrade from a previous version of PhotoDeluxe or a competing piece of graphics software for $39. Additionally PhotoDeluxe Business Edition allowed a similar deal, allowing users to upgrade from other versions of PhotoDeluxe or a competing software for $59, instead of its normal price of $99. Adobe also offered a bundle allowing users of 1.0 or 2.0 to get 3.0 and Business Edition for $79.

    Read more →