AI Chatbot You Can Talk To

AI Chatbot You Can Talk To — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Standard test image

  A standard test image is a digital image file used across different institutions to test image processing and image compression algorithms. By using the same standard test images, different labs are able to compare results, both visually and quantitatively. The images are in many cases chosen to represent natural or typical images that a class of processing techniques would need to deal with. Other test images are chosen because they present a range of challenges to image reconstruction algorithms, such as the reproduction of fine detail and textures, sharp transitions and edges, and uniform regions. == Historical origins == Test images as transmission system calibration material probably date back to the original Paris to Lyon pantelegraph link. Analogue fax equipment (and photographic equipment for the printing trade) were the largest user groups of the standardized image for calibration technology until the coming of television and digital image transmission systems. == Common test image resolutions == The standard resolution of the images is usually 512×512 or 720×576. Most of these images are available as TIFF files from the University of Southern California's Signal and Image Processing Institute. Kodak has released 768×512 images, available as PNGs, that was originally on Photo CD with higher resolution, that are widely used for comparing image compression techniques.

  Read more →
• 

  Principle of rationality

  The principle of rationality (or rationality principle) was coined by Karl R. Popper in his Harvard Lecture of 1963, and published in his book Myth of Framework. It is related to what he called the 'logic of the situation' in an Economica article of 1944/1945, published later in his book The Poverty of Historicism. According to Popper's rationality principle, agents act in the most adequate way according to the objective situation. It is an idealized conception of human behavior which he used to drive his model of situational analysis. Cognitive scientist Allen Newell elaborated on the principle in his account of knowledge level modeling. == Popper == Popper called for social science to be grounded in what he called situational analysis or situational logic. This requires building models of social situations which include individual actors and their relationship to social institutions, e.g. markets, legal codes, bureaucracies, etc. These models attribute certain aims and information to the actors. This forms the 'logic of the situation', the result of reconstructing meticulously all circumstances of an historical event. The 'principle of rationality' is the assumption that people are instrumental in trying to reach their goals, and this is what drives the model. Popper believed that this model could be continuously refined to approach the objective truth. Popper called his principle of rationality nearly empty (a technical term meaning without empirical content) and strictly speaking false, but nonetheless tremendously useful. These remarks earned him a lot of criticism because seemingly he had swerved from his famous Logic of Scientific Discovery. Among the many philosophers having discussed Popper's principle of rationality from the 1960s up to now are Noretta Koertge, R. Nadeau, Viktor J. Vanberg, Hans Albert, E. Matzner, Ian C. Jarvie, Mark A. Notturno, John Wettersten, Ian C. Böhm. == Newell == In the context of knowledge-based systems, Newell (in 1982) proposed the following principle of rationality: "If an agent has knowledge that one of its actions will lead to one of its goals, then the agent will select that action." This principle is employed by agents at the knowledge level to move closer to a desired goal. An important philosophical difference between Newell and Popper is that Newell argued that the knowledge level is real in the sense that it exists in nature and is not made up. This allowed Newell to treat the rationality principle as a way of understanding nature and avoid the problems Popper ran into by treating knowledge as non physical and therefore non empirical.

  Read more →
• 

  Incremental heuristic search

  Incremental heuristic search algorithms combine both incremental and heuristic search to speed up searches of sequences of similar search problems, which is important in domains that are only incompletely known or change dynamically. Incremental search has been studied at least since the late 1960s. Incremental search algorithms reuse information from previous searches to speed up the current search and solve search problems potentially much faster than solving them repeatedly from scratch. Similarly, heuristic search has also been studied at least since the late 1960s. Heuristic search algorithms, often based on A, use heuristic knowledge in the form of approximations of the goal distances to focus the search and solve search problems potentially much faster than uninformed search algorithms. The resulting search problems, sometimes called dynamic path planning problems, are graph search problems where paths have to be found repeatedly because the topology of the graph, its edge costs, the start vertex or the goal vertices change over time. So far, three main classes of incremental heuristic search algorithms have been developed: The first class restarts A at the point where its current search deviates from the previous one (example: Fringe Saving A). The second class updates the h-values (heuristic, i.e. approximate distance to goal) from the previous search during the current search to make them more informed (example: Generalized Adaptive A). The third class updates the g-values (distance from start) from the previous search during the current search to correct them when necessary, which can be interpreted as transforming the A search tree from the previous search into the A search tree for the current search (examples: Lifelong Planning A, D, D Lite). All three classes of incremental heuristic search algorithms are different from other replanning algorithms, such as planning by analogy, in that their plan quality does not deteriorate with the number of replanning episodes. == Applications == Incremental heuristic search has been extensively used in robotics, where a larger number of path planning systems are based on either D (typically earlier systems) or D Lite (current systems), two different incremental heuristic search algorithms.

  Read more →
• 

  Apprenticeship learning

  In artificial intelligence, apprenticeship learning (or learning from demonstration or imitation learning) is the process of learning by observing an expert. It can be viewed as a form of supervised learning, where the training dataset consists of task executions by a demonstration teacher. == Mapping function approach == Mapping methods try to mimic the expert by forming a direct mapping either from states to actions, or from states to reward values. For example, in 2002 researchers used such an approach to teach an AIBO robot basic soccer skills. === Inverse reinforcement learning approach === Inverse reinforcement learning (IRL) is the process of deriving a reward function from observed behavior. While ordinary "reinforcement learning" involves using rewards and punishments to learn behavior, in IRL the direction is reversed, and a robot observes a person's behavior to figure out what goal that behavior seems to be trying to achieve. The IRL problem can be defined as: Given 1) measurements of an agent's behaviour over time, in a variety of circumstances; 2) measurements of the sensory inputs to that agent; 3) a model of the physical environment (including the agent's body): Determine the reward function that the agent is optimizing. IRL researcher Stuart J. Russell proposes that IRL might be used to observe humans and attempt to codify their complex "ethical values", in an effort to create "ethical robots" that might someday know "not to cook your cat" without needing to be explicitly told. The scenario can be modeled as a "cooperative inverse reinforcement learning game", where a "person" player and a "robot" player cooperate to secure the person's implicit goals, despite these goals not being explicitly known by either the person nor the robot. In 2017, OpenAI and DeepMind applied deep learning to the cooperative inverse reinforcement learning in simple domains such as Atari games and straightforward robot tasks such as backflips. The human role was limited to answering queries from the robot as to which of two different actions were preferred. The researchers found evidence that the techniques may be economically scalable to modern systems. Apprenticeship via inverse reinforcement learning (AIRP) was developed by in 2004 Pieter Abbeel, Professor in Berkeley's EECS department, and Andrew Ng, Associate Professor in Stanford University's Computer Science Department. AIRP deals with "Markov decision process where we are not explicitly given a reward function, but where instead we can observe an expert demonstrating the task that we want to learn to perform". AIRP has been used to model reward functions of highly dynamic scenarios where there is no obvious reward function intuitively. Take the task of driving for example, there are many different objectives working simultaneously - such as maintaining safe following distance, a good speed, not changing lanes too often, etc. This task, may seem easy at first glance, but a trivial reward function may not converge to the policy wanted. One domain where AIRP has been used extensively is helicopter control. While simple trajectories can be intuitively derived, complicated tasks like aerobatics for shows has been successful. These include aerobatic maneuvers like - in-place flips, in-place rolls, loops, hurricanes and even auto-rotation landings. This work was developed by Pieter Abbeel, Adam Coates, and Andrew Ng - "Autonomous Helicopter Aerobatics through Apprenticeship Learning" === System model approach === System models try to mimic the expert by modeling world dynamics. == Plan approach == The system learns rules to associate preconditions and postconditions with each action. In one 1994 demonstration, a humanoid learns a generalized plan from only two demonstrations of a repetitive ball collection task. == Example == Learning from demonstration is often explained from a perspective that the working Robot-control-system is available and the human-demonstrator is using it. And indeed, if the software works, the Human operator takes the robot-arm, makes a move with it, and the robot will reproduce the action later. For example, he teaches the robot-arm how to put a cup under a coffeemaker and press the start-button. In the replay phase, the robot is imitating this behavior 1:1. But that is not how the system works internally; it is only what the audience can observe. In reality, Learning from demonstration is much more complex. One of the first works on learning by robot apprentices (anthropomorphic robots learning by imitation) was Adrian Stoica's PhD thesis in 1995. In 1997, robotics expert Stefan Schaal was working on the Sarcos robot-arm. The goal was simple: solve the pendulum swingup task. The robot itself can execute a movement, and as a result, the pendulum is moving. The problem is, that it is unclear what actions will result into which movement. It is an Optimal control-problem which can be described with mathematical formulas but is hard to solve. The idea from Schaal was, not to use a Brute-force solver but record the movements of a human-demonstration. The angle of the pendulum is logged over three seconds at the y-axis. This results into a diagram which produces a pattern. In computer animation, the principle is called spline animation. That means, on the x-axis the time is given, for example 0.5 seconds, 1.0 seconds, 1.5 seconds, while on the y-axis is the variable given. In most cases it's the position of an object. In the inverted pendulum it is the angle. The overall task consists of two parts: recording the angle over time and reproducing the recorded motion. The reproducing step is surprisingly simple. As an input we know, in which time step which angle the pendulum must have. Bringing the system to a state is called “Tracking control” or PID control. That means, we have a trajectory over time, and must find control actions to map the system to this trajectory. Other authors call the principle “steering behavior”, because the aim is to bring a robot to a given line.

  Read more →
• 

  Autonomous logistics

  Autonomous logistics describes systems that provide unmanned, autonomous transfer of equipment, baggage, people, information or resources from point-to-point with minimal human intervention. Autonomous logistics is a new area being researched and currently there are few papers on the topic, with even fewer systems developed or deployed. With web enabled cloud software there are companies focused on developing and deploying such systems which will begin coming online in 2018. == Autonomous logistics vehicles == There are several subclasses of autonomous logistics vehicles: Ground autonomous logistics Based on Unmanned ground vehicle technology, a large autonomous logistics tracked carrier, which can be deployed in a tropical forest for day and night, has been developed. Another example is the TerraMax autonomous truck based on Oshkosh's Medium Tactical Vehicle Replacement (MTVR) military truck platform. Most recently, TerraMax competed in the 2007 Darpa Urban Challenge. The MTVR was designed for the U.S. Marine Corps with a 70% off-road mission profile. TerraMax's unmanned ground vehicle kit does not interfere with the conventional operation of the vehicle. A robust sensor suite allows for 360-degree situational awareness around TerraMax. Elements of the autonomous navigation kit could be used to enhance driver awareness. The complete kit could be used in applications such as snow removal on airport runways. Aerial autonomous logistics Based on unmanned aerial vehicle technology, aerial autonomous logistics (or logistics UAVs) provides transfer of resources and equipment in disaster relief situations, replenishment operations, reconnaissance operations where information is gathered, and general parcel or package delivery. Space autonomous logistics Describes the ability to provide logistics to and from space, be that orbital, lunar or beyond. Current space logistics vehicle examples are the Progress spacecraft, Russian expendable freighter uncrewed resupply spacecraft and the Automated Transfer Vehicle, expendable uncrewed resupply spacecraft developed by the European Space Agency. Above Water autonomous logistics Based on unmanned surface vehicle technology, this class of vehicles provides a range of surface fleet replenishment and equipment transfer capabilities. Subsea autonomous logistics Using autonomous underwater vehicle technology, these vehicles provide re-supply to underwater facilities, reconnaissance of underwater structures, emergency recovery capability, and so on. == Agent-based logistics == Shipping containers handle most of today's intercontinental transport of packaged goods. Managing them in terms of planning and scheduling is a challenging task due to the complexity and dynamics of the involved processes. Hence, recent developments show an increasing trend towards autonomous control with software agents acting on behalf of the logistic objects. Despite the high degree of autonomy it is still necessary to cooperate in order to achieve certain goals. The current trends and recent changes in logistics lead to new, complex and partially conflicting requirements for logistic planning and control systems. Due to the distributed nature of logistics, the usage of agent technology is promising. Due to the mobile nature of logistics, the usage of mobile agent technology is promising as well. Scenarios of usage of mobile agents in logistics has been envisioned.

  Read more →
• 

  Stability (learning theory)

  Stability, also known as algorithmic stability, is a notion in computational learning theory of how a machine learning algorithm output is changed with small perturbations to its inputs. A stable learning algorithm is one for which the prediction does not change much when the training data is modified slightly. For instance, consider a machine learning algorithm that is being trained to recognize handwritten letters of the alphabet, using 1000 examples of handwritten letters and their labels ("A" to "Z") as a training set. One way to modify this training set is to leave out an example, so that only 999 examples of handwritten letters and their labels are available. A stable learning algorithm would produce a similar classifier with both the 1000-element and 999-element training sets. Stability can be studied for many types of learning problems, from language learning to inverse problems in physics and engineering, as it is a property of the learning process rather than the type of information being learned. The study of stability gained importance in computational learning theory in the 2000s when it was shown to have a connection with generalization. It was shown that for large classes of learning algorithms, notably empirical risk minimization algorithms, certain types of stability ensure good generalization. == History == A central goal in designing a machine learning system is to guarantee that the learning algorithm will generalize, or perform accurately on new examples after being trained on a finite number of them. In the 1990s, milestones were reached in obtaining generalization bounds for supervised learning algorithms. The technique historically used to prove generalization was to show that an algorithm was consistent, using the uniform convergence properties of empirical quantities to their means. This technique was used to obtain generalization bounds for the large class of empirical risk minimization (ERM) algorithms. An ERM algorithm is one that selects a solution from a hypothesis space H {\displaystyle H} in such a way to minimize the empirical error on a training set S {\displaystyle S} . A general result, proved by Vladimir Vapnik for an ERM binary classification algorithms, is that for any target function and input distribution, any hypothesis space H {\displaystyle H} with VC-dimension d {\displaystyle d} , and n {\displaystyle n} training examples, the algorithm is consistent and will produce a training error that is at most O ( d n ) {\displaystyle O\left({\sqrt {\frac {d}{n}}}\right)} (plus logarithmic factors) from the true error. The result was later extended to almost-ERM algorithms with function classes that do not have unique minimizers. Vapnik's work, using what became known as VC theory, established a relationship between generalization of a learning algorithm and properties of the hypothesis space H {\displaystyle H} of functions being learned. However, these results could not be applied to algorithms with hypothesis spaces of unbounded VC-dimension. Put another way, these results could not be applied when the information being learned had a complexity that was too large to measure. Some of the simplest machine learning algorithms—for instance, for regression—have hypothesis spaces with unbounded VC-dimension. Another example is language learning algorithms that can produce sentences of arbitrary length. Stability analysis was developed in the 2000s for computational learning theory and is an alternative method for obtaining generalization bounds. The stability of an algorithm is a property of the learning process, rather than a direct property of the hypothesis space H {\displaystyle H} , and it can be assessed in algorithms that have hypothesis spaces with unbounded or undefined VC-dimension such as nearest neighbor. A stable learning algorithm is one for which the learned function does not change much when the training set is slightly modified, for instance by leaving out an example. A measure of Leave one out error is used in a Cross Validation Leave One Out (CVloo) algorithm to evaluate a learning algorithm's stability with respect to the loss function. As such, stability analysis is the application of sensitivity analysis to machine learning. == Summary of classic results == Early 1900s - Stability in learning theory was earliest described in terms of continuity of the learning map L {\displaystyle L} , traced to Andrey Nikolayevich Tikhonov. 1979 - Devroye and Wagner observed that the leave-one-out behavior of an algorithm is related to its sensitivity to small changes in the sample. 1999 - Kearns and Ron discovered a connection between finite VC-dimension and stability. 2002 - In a landmark paper, Bousquet and Elisseeff proposed the notion of uniform hypothesis stability of a learning algorithm and showed that it implies low generalization error. Uniform hypothesis stability, however, is a strong condition that does not apply to large classes of algorithms, including ERM algorithms with a hypothesis space of only two functions. 2002 - Kutin and Niyogi extended Bousquet and Elisseeff's results by providing generalization bounds for several weaker forms of stability which they called almost-everywhere stability. Furthermore, they took an initial step in establishing the relationship between stability and consistency in ERM algorithms in the Probably Approximately Correct (PAC) setting. 2004 - Poggio et al. proved a general relationship between stability and ERM consistency. They proposed a statistical form of leave-one-out-stability which they called CVEEEloo stability, and showed that it is a) sufficient for generalization in bounded loss classes, and b) necessary and sufficient for consistency (and thus generalization) of ERM algorithms for certain loss functions such as the square loss, the absolute value and the binary classification loss. 2010 - Shalev Shwartz et al. noticed problems with the original results of Vapnik due to the complex relations between hypothesis space and loss class. They discuss stability notions that capture different loss classes and different types of learning, supervised and unsupervised. 2016 - Moritz Hardt et al. proved stability of gradient descent given certain assumption on the hypothesis and number of times each instance is used to update the model. == Preliminary definitions == We define several terms related to learning algorithms training sets, so that we can then define stability in multiple ways and present theorems from the field. A machine learning algorithm, also known as a learning map L {\displaystyle L} , maps a training data set, which is a set of labeled examples ( x , y ) {\displaystyle (x,y)} , onto a function f {\displaystyle f} from X {\displaystyle X} to Y {\displaystyle Y} , where X {\displaystyle X} and Y {\displaystyle Y} are in the same space of the training examples. The functions f {\displaystyle f} are selected from a hypothesis space of functions called H {\displaystyle H} . The training set from which an algorithm learns is defined as S = { z 1 = ( x 1 , y 1 ) , . . , z m = ( x m , y m ) } {\displaystyle S=\{z_{1}=(x_{1},\ y_{1})\ ,..,\ z_{m}=(x_{m},\ y_{m})\}} and is of size m {\displaystyle m} in Z = X × Y {\displaystyle Z=X\times Y} drawn i.i.d. from an unknown distribution D. Thus, the learning map L {\displaystyle L} is defined as a mapping from Z m {\displaystyle Z_{m}} into H {\displaystyle H} , mapping a training set S {\displaystyle S} onto a function f S {\displaystyle f_{S}} from X {\displaystyle X} to Y {\displaystyle Y} . Here, we consider only deterministic algorithms where L {\displaystyle L} is symmetric with respect to S {\displaystyle S} , i.e. it does not depend on the order of the elements in the training set. Furthermore, we assume that all functions are measurable and all sets are countable. The loss V {\displaystyle V} of a hypothesis f {\displaystyle f} with respect to an example z = ( x , y ) {\displaystyle z=(x,y)} is then defined as V ( f , z ) = V ( f ( x ) , y ) {\displaystyle V(f,z)=V(f(x),y)} . The empirical error of f {\displaystyle f} is I S [ f ] = 1 n ∑ V ( f , z i ) {\displaystyle I_{S}[f]={\frac {1}{n}}\sum V(f,z_{i})} . The true error of f {\displaystyle f} is I [ f ] = E z V ( f , z ) {\displaystyle I[f]=\mathbb {E} _{z}V(f,z)} Given a training set S of size m, we will build, for all i = 1....,m, modified training sets as follows: By removing the i-th element S | i = { z 1 , . . . , z i − 1 , z i + 1 , . . . , z m } {\displaystyle S^{|i}=\{z_{1},...,\ z_{i-1},\ z_{i+1},...,\ z_{m}\}} By replacing the i-th element S i = { z 1 , . . . , z i − 1 , z i ′ , z i + 1 , . . . , z m } {\displaystyle S^{i}=\{z_{1},...,\ z_{i-1},\ z_{i}',\ z_{i+1},...,\ z_{m}\}} == Definitions of stability == === Hypothesis Stability === An algorithm L {\displaystyle L} has hypothesis stability β with respect to the loss function V if the following holds: ∀ i ∈ { 1 , . . . , m } , E S , z [ | V ( f S , z ) − V ( f S |

  Read more →
• 

  Human-in-the-loop

  Human-in-the-loop (HITL) is used in multiple contexts. It can be defined as a model requiring human interaction. HITL is associated with modeling and simulation (M&S) in the live, virtual, and constructive taxonomy. HITL, along with the related human-on-the-loop, are also used in relation to lethal autonomous weapons. Further, HITL is used in the context of machine learning.It is also used in conversational AI to manage complex interactions that require human empathy. == Machine learning == In machine learning, HITL is used in the sense of humans aiding the computer in making the correct decisions in building a model. HITL improves machine learning over random sampling by selecting the most critical data needed to refine the model. == Simulation == In simulation, HITL models may conform to human factors requirements as in the case of a mockup. In this type of simulation, a human is always part of the simulation and consequently influences the outcome in such a way that is difficult if not impossible to reproduce exactly. HITL also readily allows for the identification of problems and requirements that may not be easily identified by other means of simulation. HITL is often referred to as an interactive simulation, which is a special kind of physical simulation in which physical simulations include human operators, such as in a flight or a driving simulator. === Benefits === Human-in-the-loop allows the user to change the outcome of an event or process. The immersion effectively contributes to a positive transfer of acquired skills into the real world. This can be demonstrated by trainees utilizing flight simulators in preparation to become pilots. HITL also allows for the acquisition of knowledge regarding how a new process may affect a particular event. Utilizing HITL allows participants to interact with realistic models and attempt to perform as they would in an actual scenario. HITL simulations bring to the surface issues that would not otherwise be apparent until after a new process has been deployed. A real-world example of HITL simulation as an evaluation tool is its usage by the Federal Aviation Administration (FAA) to allow air traffic controllers to test new automation procedures by directing the activities of simulated air traffic while monitoring the effect of the newly implemented procedures. As with most processes, there is always the possibility of human error, which can only be reproduced using HITL simulation. Although much can be done to automate systems, humans typically still need to take the information provided by a system to determine the next course of action based on their judgment and experience. Intelligent systems can only go so far in certain circumstances to automate a process; only humans in the simulation can accurately judge the final design. Tabletop simulation may be useful in the very early stages of project development for the purpose of collecting data to set broad parameters, but the important decisions require human-in-the-loop simulation. HITL reflects scenarios where human input remains essential despite advances in automation. === Within the virtual simulation taxonomy === Virtual simulations inject HITL in a central role by exercising motor control skills (e.g. flying an airplane), decision making skills (e.g. committing fire control resources to action), or communication skills (e.g. as members of a C4I team). === Examples === Flight simulators Driving simulators Marine simulators Video games Supply chain management simulators Digital puppetry === Misconceptions === Although human-in-the-loop simulation can include a computer simulation in the form of a synthetic environment, computer simulation is not necessarily a form of human-in-the-loop simulation, and is often considered as human-out-of-the loop simulation. In this particular case, a computer model’s behavior is modified according to a set of initial parameters. The results of the model differ from the results stemming from a true human-in-the-loop simulation because the results can easily be replicated time and time again, by simply providing identical parameters. == Weapons == === Taxonomy === Three classifications of the degree of human control of autonomous weapon systems were laid out by Bonnie Docherty in a 2012 Human Rights Watch report. human-in-the-loop: a human must instigate the action of the weapon (in other words not fully autonomous) human-on-the-loop: a human may abort an action human-out-of-the-loop: no human action is involved === Positive human action === In discussions of autonomous weapons and nuclear command and control, the phrase positive human action has been used alongside "human-in-the-loop" to emphasize that a human operator must affirmatively authorize the use of force. Descriptions of the United States Navy's Aegis Combat System have used the phrase in characterizing a requirement for affirmative human action to initiate live firing. A survey of autonomous weapons systems described the Aegis "Auto SM" mode as one in which "the system fully develops the engagement process however engagement requires positive human action". The phrase entered United States federal law in the National Defense Authorization Act for Fiscal Year 2025, which stipulates that artificial intelligence systems not compromise "the principle of requiring positive human actions in execution of decisions by the President with respect to the employment of nuclear weapons".

  Read more →
• 

  Granular computing

  Granular computing is an emerging computing paradigm of information processing that concerns the processing of complex information entities called "information granules", which arise in the process of data abstraction and derivation of knowledge from information or data. Generally speaking, information granules are collections of entities that usually originate at the numeric level and are arranged together due to their similarity, functional or physical adjacency, indistinguishability, coherency, or the like. At present, granular computing is more a theoretical perspective than a coherent set of methods or principles. As a theoretical perspective, it encourages an approach to data that recognizes and exploits the knowledge present in data at various levels of resolution or scales. In this sense, it encompasses all methods which provide flexibility and adaptability in the resolution at which knowledge or information is extracted and represented. == Types of granulation == As mentioned above, granular computing is not an algorithm or process; there is no particular method that is called "granular computing". It is rather an approach to looking at data that recognizes how different and interesting regularities in the data can appear at different levels of granularity, much as different features become salient in satellite images of greater or lesser resolution. On a low-resolution satellite image, for example, one might notice interesting cloud patterns representing cyclones or other large-scale weather phenomena, while in a higher-resolution image, one misses these large-scale atmospheric phenomena but instead notices smaller-scale phenomena, such as the interesting pattern that is the streets of Manhattan. The same is generally true of all data: At different resolutions or granularities, different features and relationships emerge. The aim of granular computing is to try to take advantage of this fact in designing more effective machine-learning and reasoning systems. There are several types of granularity that are often encountered in data mining and machine learning, and we review them below: === Value granulation (discretization/quantization) === One type of granulation is the quantization of variables. It is very common that in data mining or machine-learning applications the resolution of variables needs to be decreased in order to extract meaningful regularities. An example of this would be a variable such as "outside temperature" (temp), which in a given application might be recorded to several decimal places of precision (depending on the sensing apparatus). However, for purposes of extracting relationships between "outside temperature" and, say, "number of health-club applications" (club), it will generally be advantageous to quantize "outside temperature" into a smaller number of intervals. ==== Motivations ==== There are several interrelated reasons for granulating variables in this fashion: Based on prior domain knowledge, there is no expectation that minute variations in temperature (e.g., the difference between 80–80.7 °F (26.7–27.1 °C)) could have an influence on behaviors driving the number of health-club applications. For this reason, any "regularity" which our learning algorithms might detect at this level of resolution would have to be spurious, as an artifact of overfitting. By coarsening the temperature variable into intervals the difference between which we do anticipate (based on prior domain knowledge) might influence number of health-club applications, we eliminate the possibility of detecting these spurious patterns. Thus, in this case, reducing resolution is a method of controlling overfitting. By reducing the number of intervals in the temperature variable (i.e., increasing its grain size), we increase the amount of sample data indexed by each interval designation. Thus, by coarsening the variable, we increase sample sizes and achieve better statistical estimation. In this sense, increasing granularity provides an antidote to the so-called curse of dimensionality, which relates to the exponential decrease in statistical power with increase in number of dimensions or variable cardinality. Independent of prior domain knowledge, it is often the case that meaningful regularities (i.e., which can be detected by a given learning methodology, representational language, etc.) may exist at one level of resolution and not at another. For example, a simple learner or pattern recognition system may seek to extract regularities satisfying a conditional probability threshold such as p ( Y = y j | X = x i ) ≥ α . {\displaystyle p(Y=y_{j}|X=x_{i})\geq \alpha .} In the special case where α = 1 , {\displaystyle \alpha =1,} this recognition system is essentially detecting logical implication of the form X = x i → Y = y j {\displaystyle X=x_{i}\rightarrow Y=y_{j}} or, in words, "if X = x i , {\displaystyle X=x_{i},} then Y = y j {\displaystyle Y=y_{j}} ". The system's ability to recognize such implications (or, in general, conditional probabilities exceeding threshold) is partially contingent on the resolution with which the system analyzes the variables. As an example of this last point, consider the feature space shown to the right. The variables may each be regarded at two different resolutions. Variable X {\displaystyle X} may be regarded at a high (quaternary) resolution wherein it takes on the four values { x 1 , x 2 , x 3 , x 4 } {\displaystyle \{x_{1},x_{2},x_{3},x_{4}\}} or at a lower (binary) resolution wherein it takes on the two values { X 1 , X 2 } . {\displaystyle \{X_{1},X_{2}\}.} Similarly, variable Y {\displaystyle Y} may be regarded at a high (quaternary) resolution or at a lower (binary) resolution, where it takes on the values { y 1 , y 2 , y 3 , y 4 } {\displaystyle \{y_{1},y_{2},y_{3},y_{4}\}} or { Y 1 , Y 2 } , {\displaystyle \{Y_{1},Y_{2}\},} respectively. At the high resolution, there are no detectable implications of the form X = x i → Y = y j , {\displaystyle X=x_{i}\rightarrow Y=y_{j},} since every x i {\displaystyle x_{i}} is associated with more than one y j , {\displaystyle y_{j},} and thus, for all x i , {\displaystyle x_{i},} p ( Y = y j | X = x i ) < 1. {\displaystyle p(Y=y_{j}|X=x_{i})<1.} However, at the low (binary) variable resolution, two bilateral implications become detectable: X = X 1 ↔ Y = Y 1 {\displaystyle X=X_{1}\leftrightarrow Y=Y_{1}} and X = X 2 ↔ Y = Y 2 {\displaystyle X=X_{2}\leftrightarrow Y=Y_{2}} , since every X 1 {\displaystyle X_{1}} occurs iff Y 1 {\displaystyle Y_{1}} and X 2 {\displaystyle X_{2}} occurs iff Y 2 . {\displaystyle Y_{2}.} Thus, a pattern recognition system scanning for implications of this kind would find them at the binary variable resolution, but would fail to find them at the higher quaternary variable resolution. ==== Issues and methods ==== It is not feasible to exhaustively test all possible discretization resolutions on all variables in order to see which combination of resolutions yields interesting or significant results. Instead, the feature space must be preprocessed (often by an entropy analysis of some kind) so that some guidance can be given as to how the discretization process should proceed. Moreover, one cannot generally achieve good results by naively analyzing and discretizing each variable independently, since this may obliterate the very interactions that we had hoped to discover. A sample of papers that address the problem of variable discretization in general, and multiple-variable discretization in particular, is as follows: Chiu, Wong & Cheung (1991), Bay (2001), Liu et al. (2002), Wang & Liu (1998), Zighed, Rabaséda & Rakotomalala (1998), Catlett (1991), Dougherty, Kohavi & Sahami (1995), Monti & Cooper (1999), Fayyad & Irani (1993), Chiu, Cheung & Wong (1990), Nguyen & Nguyen (1998), Grzymala-Busse & Stefanowski (2001), Ting (1994), Ludl & Widmer (2000), Pfahringer (1995), An & Cercone (1999), Chiu & Cheung (1989), Chmielewski & Grzymala-Busse (1996), Lee & Shin (1994), Liu & Wellman (2002), Liu & Wellman (2004). === Variable granulation (clustering/aggregation/transformation) === Variable granulation is a term that could describe a variety of techniques, most of which are aimed at reducing dimensionality, redundancy, and storage requirements. We briefly describe some of the ideas here, and present pointers to the literature. ==== Variable transformation ==== A number of classical methods, such as principal component analysis, multidimensional scaling, factor analysis, and structural equation modeling, and their relatives, fall under the genus of "variable transformation." Also in this category are more modern areas of study such as dimensionality reduction, projection pursuit, and independent component analysis. The common goal of these methods in general is to find a representation of the data in terms of new variables, which are a linear or nonlinear transformation of the original variables, and in which important stati

  Read more →
• 

  Ave!Comics

  Ave!Comics Production is a privately owned French company editing comics on smartphones, tablets and computers. It was founded in 2008 and it is a subsidiary of Aquafadas, a software development company in digital publishing owned by Kobo Inc. AveComics is a comic book store for digital comic books that can be used on computers, tablets, and smartphones.(iOS, Android) Readers can buy and read comic books, manga and graphic novels in French, English and Spanish. AveComics uses a technology created by Aquafadas for comics transformation, distribution and reading, based around its AVE format. The AveComics application was also a finalist in the BlackBerry Innovation Awards 2009, in the "Entertainment" category. == Company history == Aquafadas, a company working on creative software for Flash, HTML5, photo, and video editing, created the application MyComics to allow the reading of comics on mobile in 2006. This application was made available in 2008, to enable the reading and storing of comics on iPhone and iPod Touch. A reading system adapted to low resolution screens was also available. In October of the same year, the company launched a comics library on both devices, in partnership with the Angoulême International Comics Festival, Fnac and SNCF. This library included the official selection of the festival, and was downloaded over 150 000 times. In December 2008 "The Adventures of Lucky Luke n°3", at Lucky Comics was published on both devices. The comic made a 50 000 € turnover. In April 2009, "Les Blondes" 10th volume was the top-selling comic for 10 months on the AppStore. After, in August 2009, the AveComics application was launched on iPhone, iPod Touch and BlackBerry. The company's website was launched in September when more than 100 titles were available on smartphones and computers. == Catalogue == AveComics works with over 80 international publishers including Glénat, Marsu Productions, Delcourt, Casterman, Soleil, Ubisoft, Les Humanoïdes Associés and Mad Fabrik. Comics such as "Assassin's Creed", "Talisman", "Titeuf", and "Seoul District" are sold by the company. == Award == Grand Prix Software Venture Capital - Senate 2008.

  Read more →
• 

  Quantum machine learning

  Quantum machine learning (QML) is the study of quantum algorithms for machine learning. It often refers to quantum algorithms for machine learning tasks which analyze classical data, sometimes called quantum-enhanced machine learning. QML algorithms use qubits and quantum operations to try to improve the space and time complexity of classical machine learning algorithms. Hybrid QML methods involve both classical and quantum processing, where computationally difficult subroutines are outsourced to a quantum device. These routines can be more complex in nature and executed faster on a quantum computer. Furthermore, quantum algorithms can be used to analyze quantum states instead of classical data. The term "quantum machine learning" is sometimes used to refer classical machine learning methods applied to data generated from quantum experiments (i.e. machine learning of quantum systems), such as learning the phase transitions of a quantum system or creating new quantum experiments. QML also extends to a branch of research that explores methodological and structural similarities between certain physical systems and learning systems, in particular neural networks. For example, some mathematical and numerical techniques from quantum physics are applicable to classical deep learning and vice versa. Furthermore, researchers investigate more abstract notions of learning theory with respect to quantum information, sometimes referred to as "quantum learning theory". == Machine learning with quantum computers == Quantum-enhanced machine learning refers to quantum algorithms that solve tasks in machine learning, thereby improving and often expediting classical machine learning techniques. Such algorithms typically require one to encode the given classical data set into a quantum computer to make it accessible for quantum information processing. Subsequently, quantum information processing routines are applied and the result of the quantum computation is read out by measuring the quantum system. For example, the outcome of the measurement of a qubit reveals the result of a binary classification task. While many proposals of QML algorithms are still purely theoretical and require a full-scale universal quantum computer to be tested, others have been implemented on small-scale or special purpose quantum devices. === Quantum associative memories and quantum pattern recognition === Early work on quantum associative memories has been done by Dan Ventura and Tony Martinez and by Carlo A. Trugenberger in the late 1990s and early 2000s. Associative (or content-addressable) memories are able to recognize stored content on the basis of a similarity measure, while random access memories are accessed by the address of stored information and not its content. As such they must be able to retrieve both incomplete and corrupted patterns, the essential machine learning task of pattern recognition. Typical classical associative memories store p patterns in the O ( n 2 ) {\displaystyle O(n^{2})} interactions (synapses) of a real, symmetric energy matrix over a network of n artificial neurons. The encoding is such that the desired patterns are local minima of the energy functional and retrieval is done by minimizing the total energy, starting from an initial configuration. Unfortunately, classical associative memories are severely limited by the phenomenon of cross-talk. When too many patterns are stored, spurious memories appear which quickly proliferate, so that the energy landscape becomes disordered and no retrieval is anymore possible. The number of storable patterns is typically limited by a linear function of the number of neurons, p ≤ O ( n ) {\displaystyle p\leq O(n)} . Quantum associative memories (in their simplest realization) store patterns in a unitary matrix U acting on the Hilbert space of n qubits. Retrieval is realized by the unitary evolution of a fixed initial state to a quantum superposition of the desired patterns with probability distribution peaked on the most similar pattern to an input. By its very quantum nature, the retrieval process is thus probabilistic. Because quantum associative memories are free from cross-talk, however, spurious memories are never generated. Correspondingly, they have a superior capacity than classical ones. The number of parameters in the unitary matrix U is O ( p n ) {\displaystyle O(pn)} . One can thus have efficient, spurious-memory-free quantum associative memories for any polynomial number of patterns. If the matrix U is encoded as a unique operator (as opposed as to a sequence of gates as in the circuit model), e.g. by an optical interferometer, the retrieval becomes efficient even for an exponential number of patterns. === Linear algebra simulation with quantum amplitudes === A number of quantum algorithms for machine learning are based on the idea of amplitude encoding, that is, to associate the amplitudes of a quantum state with the inputs and outputs of computations. Since a state of n {\displaystyle n} qubits is described by 2 n {\displaystyle 2^{n}} complex amplitudes, this information encoding can allow for an exponentially compact representation. Intuitively, this corresponds to associating a discrete probability distribution over binary random variables with a classical vector. The goal of algorithms based on amplitude encoding is to formulate quantum algorithms whose resources grow polynomially in the number of qubits n {\displaystyle n} , which amounts to a logarithmic time complexity in the number of amplitudes and thereby the dimension of the input. Many QML algorithms in this category are based on variations of the quantum algorithm for linear systems of equations (colloquially called HHL, after the paper's authors) which, under specific conditions, performs a matrix inversion using an amount of physical resources growing only logarithmically in the dimensions of the matrix. One of these conditions is that a Hamiltonian which entry-wise corresponds to the matrix can be simulated efficiently, which is known to be possible if the matrix is sparse or low rank. For reference, any known classical algorithm for matrix inversion requires a number of operations that grows more than quadratically in the dimension of the matrix (e.g. O ( n 2.373 ) {\displaystyle O{\mathord {\left(n^{2.373}\right)}}} ), but they are not restricted to sparse matrices. Quantum matrix inversion can be applied to machine learning methods in which the training reduces to solving a linear system of equations, for example in least-squares linear regression, the least-squares version of support vector machines, and Gaussian processes. A crucial bottleneck of methods that simulate linear algebra computations with the amplitudes of quantum states is state preparation, which often requires one to initialise a quantum system in a state whose amplitudes reflect the features of the entire dataset. Although efficient methods for state preparation are known for specific cases, this step easily hides the complexity of the task. === Variational quantum algorithms (VQAs) === In a variational quantum algorithm, a classical computer optimizes the parameters used to prepare a quantum state, while a quantum computer is used to do the actual state preparation and measurement. VQAs are considered promising candidates for noisy intermediate-scale quantum computers. Variational quantum circuits (or parameterized quantum circuits) are a popular class of VQAs where the parameters are those used in a fixed quantum circuit. Researchers have studied VQCs to solve optimization problems and find the ground state energy of complex quantum systems, which were difficult to solve using a classical computer. === Quantum binary classifier === Pattern reorganization is one of the important tasks of machine learning, binary classification is one of the tools or algorithms to find patterns. Binary classification is used in supervised learning and in unsupervised learning. In QML, classical bits are converted to qubits and they are mapped to Hilbert space; complex value data are used in a quantum binary classifier to use the advantage of Hilbert space. By exploiting the quantum mechanic properties such as superposition, entanglement, interference the quantum binary classifier produces the accurate result in short period of time. === Quantum machine learning algorithms based on Grover search === Another approach to improving classical machine learning with quantum information processing uses amplitude amplification methods based on Grover's search algorithm, which has been shown to solve unstructured search problems with a quadratic speedup compared to classical algorithms. These quantum routines can be employed for learning algorithms that translate into an unstructured search task, as can be done, for instance, in the case of the k-medians and the k-nearest neighbors algorithms. Other applications include quadratic speedups in the training of perceptrons. An e

  Read more →
• 

  Grammar systems theory

  Grammar systems theory is a field of theoretical computer science that studies systems of finite collections of formal grammars generating a formal language. Each grammar works on a string, a so-called sequential form that represents an environment. Grammar systems can thus be used as a formalization of decentralized or distributed systems of agents in artificial intelligence. Let A {\displaystyle \mathbb {A} } be a simple reactive agent moving on the table and trying not to fall down from the table with two reactions, t for turning and ƒ for moving forward. The set of possible behaviors of A {\displaystyle \mathbb {A} } can then be described as formal language L A = { ( f m t n f r ) + : 1 ≤ m ≤ k ; 1 ≤ n ≤ ℓ ; 1 ≤ r ≤ k } , {\displaystyle \mathbb {L_{A}} =\{(f^{m}t^{n}f^{r})^{+}:1\leq m\leq k;1\leq n\leq \ell ;1\leq r\leq k\},} where ƒ can be done maximally k times and t can be done maximally ℓ times considering the dimensions of the table. Let G A {\displaystyle \mathbb {G_{A}} } be a formal grammar which generates language L A {\displaystyle \mathbb {L_{A}} } . The behavior of A {\displaystyle \mathbb {A} } is then described by this grammar. Suppose the A {\displaystyle \mathbb {A} } has a subsumption architecture; each component of this architecture can be then represented as a formal grammar, too, and the final behavior of the agent is then described by this system of grammars. The schema on the right describes such a system of grammars which shares a common string representing an environment. The shared sequential form is sequentially rewritten by each grammar, which can represent either a component or generally an agent. If grammars communicate together and work on a shared sequential form, it is called a Cooperating Distributed (DC) grammar system. Shared sequential form is a similar concept to the blackboard approach in AI, which is inspired by an idea of experts solving some problem together while they share their proposals and ideas on a shared blackboard. Each grammar in a grammar system can also work on its own string and communicate with other grammars in a system by sending their sequential forms on request. Such a grammar system is then called a Parallel Communicating (PC) grammar system. PC and DC are inspired by distributed AI. If there is no communication between grammars, the system is close to the decentralized approaches in AI. These kinds of grammar systems are sometimes called colonies or Eco-Grammar systems, depending (besides others) on whether the environment is changing on its own (Eco-Grammar system) or not (colonies).

  Read more →
• 

  Kolmogorov–Arnold Networks

  Kolmogorov–Arnold Networks (KANs) are a type of artificial neural network architecture inspired by the Kolmogorov–Arnold representation theorem, also known as the superposition theorem. Unlike traditional multilayer perceptrons (MLPs), which rely on fixed activation functions and linear weights, KANs replace each weight with a learnable univariate function, often represented using splines. == History == KANs (Kolmogorov–Arnold Networks) were proposed by Liu et al. (2024) as a generalization of the Kolmogorov–Arnold representation theorem (KART), aiming to outperform MLPs in small-scale AI and scientific tasks. Before KANs, numerous studies explored KART's connections to neural networks or used it as a basis for designing new network architectures. In the 1980s and 1990s, early research applied KART to neural network design. Kůrková et al. (1992), Hecht-Nielsen (1987), and Nees (1994) established theoretical foundations for multilayer networks based on KART. Igelnik et al. (2003) introduced the Kolmogorov Spline Network using cubic splines to model complex functions. Sprecher (1996, 1997) introduced numerical methods for building network layers, while Nakamura et al. (1993) created activation functions with guaranteed approximation accuracy. These works linked KART's theoretical potential with practical neural network implementation. KART has also been used in other computational and theoretical fields. Coppejans (2004) developed nonparametric regression estimators using B-splines, Bryant (2008) applied it to high-dimensional image tasks, Liu (2015) investigated theoretical applications in optimal transport and image encryption, and more recently, Polar and Poluektov (2021) used Urysohn operators for efficient KART construction, while Fakhoury et al. (2022) introduced ExSpliNet, integrating KART with probabilistic trees and multivariate B-splines for improved function approximation. == Architecture == KANs are based on the Kolmogorov–Arnold representation theorem, which was linked to the 13th Hilbert problem. Given x = ( x 1 , x 2 , … , x n ) {\displaystyle x=(x_{1},x_{2},\dots ,x_{n})} consisting of n variables, a multivariate continuous function f ( x ) {\displaystyle f(x)} can be represented as: f ( x ) = f ( x 1 , … , x n ) = ∑ q = 1 2 n + 1 Φ q ( ∑ p = 1 n φ q , p ( x p ) ) {\displaystyle f(x)=f(x_{1},\dots ,x_{n})=\sum _{q=1}^{2n+1}\Phi _{q}\left(\sum _{p=1}^{n}\varphi _{q,p}(x_{p})\right)} (1) This formulation contains two nested summations: an outer and an inner sum. The outer sum ∑ q = 1 2 n + 1 {\displaystyle \sum _{q=1}^{2n+1}} aggregates 2 n + 1 {\displaystyle 2n+1} terms, each involving a function Φ q : R → R {\displaystyle \Phi _{q}:\mathbb {R} \to \mathbb {R} } . The inner sum ∑ p = 1 n {\displaystyle \sum _{p=1}^{n}} computes n terms for each q, where each term φ q , p : [ 0 , 1 ] → R {\displaystyle \varphi _{q,p}:[0,1]\to \mathbb {R} } is a continuous function of the single variable x p {\displaystyle x_{p}} . The inner continuous functions φ q , p {\displaystyle \varphi _{q,p}} are universal, independent of f {\displaystyle f} , while the outer functions Φ q {\displaystyle \Phi _{q}} depend on the specific function f {\displaystyle f} being represented. The representation (1) holds for all multivariate functions f {\displaystyle f} as proved in . If f {\displaystyle f} is continuous, then the outer functions Φ q {\displaystyle \Phi _{q}} are continuous; if f {\displaystyle f} is discontinuous, then the corresponding Φ q {\displaystyle \Phi _{q}} are generally discontinuous, while the inner functions φ q , p {\displaystyle \varphi _{q,p}} remain the same universal functions. Liu et al. proposed the name KAN. A general KAN network consisting of L layers takes x to generate the output as: K A N ( x ) = ( Φ L − 1 ∘ Φ L − 2 ∘ ⋯ ∘ Φ 1 ∘ Φ 0 ) x {\displaystyle \mathrm {KAN} (x)=(\Phi ^{L-1}\circ \Phi ^{L-2}\circ \cdots \circ \Phi ^{1}\circ \Phi ^{0})x} (3) Here, Φ l {\displaystyle \Phi ^{l}} is the function matrix of the l-th KAN layer or a set of pre-activations. Let i denote the neuron of the l-th layer and j the neuron of the (l+1)-th layer. The activation function φ j , i l {\displaystyle \varphi _{j,i}^{l}} connects (l, i) to (l+1, j): φ j , i l , l = 0 , … , L − 1 , i = 1 , … , n l , j = 1 , … , n l + 1 {\displaystyle \varphi _{j,i}^{l},\quad l=0,\dots ,L-1,\;i=1,\dots ,n_{l},\;j=1,\dots ,n_{l+1}} (4) where nl is the number of nodes of the l-th layer. Thus, the function matrix Φ l {\displaystyle \Phi ^{l}} can be represented as an n l + 1 × n l {\displaystyle n_{l+1}\times n_{l}} matrix of activations: x l + 1 = ( φ 1 , 1 l ( ⋅ ) φ 1 , 2 l ( ⋅ ) ⋯ φ 1 , n l l ( ⋅ ) φ 2 , 1 l ( ⋅ ) φ 2 , 2 l ( ⋅ ) ⋯ φ 2 , n l l ( ⋅ ) ⋮ ⋮ ⋱ ⋮ φ n l + 1 , 1 l ( ⋅ ) φ n l + 1 , 2 l ( ⋅ ) ⋯ φ n l + 1 , n l l ( ⋅ ) ) x l {\displaystyle x^{l+1}={\begin{pmatrix}\varphi _{1,1}^{l}(\cdot )&\varphi _{1,2}^{l}(\cdot )&\cdots &\varphi _{1,n_{l}}^{l}(\cdot )\\\varphi _{2,1}^{l}(\cdot )&\varphi _{2,2}^{l}(\cdot )&\cdots &\varphi _{2,n_{l}}^{l}(\cdot )\\\vdots &\vdots &\ddots &\vdots \\\varphi _{n_{l+1},1}^{l}(\cdot )&\varphi _{n_{l+1},2}^{l}(\cdot )&\cdots &\varphi _{n_{l+1},n_{l}}^{l}(\cdot )\end{pmatrix}}x^{l}} == Implementations == To make the KAN layers optimizable, the inner function is formed by the combination of spline and basic functions as the formula: φ ( x ) = w b b ( x ) + w s spline ( x ) {\displaystyle \varphi (x)=w_{b}\,b(x)+w_{s}\,{\text{spline}}(x)} where b ( x ) {\displaystyle b(x)} is the basic function, usually defined as s i l u ( x ) = x / ( 1 + e x ) {\displaystyle silu(x)=x/(1+e^{x})} and w b {\displaystyle w_{b}} is the base weight matrix. Also, w s {\displaystyle w_{s}} is the spline weight matrix and spline ( x ) {\displaystyle {\text{spline}}(x)} is the spline function. The spline function can be a sum of B-splines. spline ( x ) = ∑ i c i B i ( x ) {\displaystyle {\text{spline}}(x)=\sum _{i}c_{i}B_{i}(x)} Many studies suggested to use other polynomial and curve functions instead of B-spline to create new KAN variants. == Functions used == The choice of functional basis strongly influences the performance of KANs. Common function families include: B-splines: Provide locality, smoothness, and interpretability; they are the most widely used in current implementations. RBFs (include Gaussian RBFs): Capture localized features in data and are effective in approximating functions with non-linear or clustered structures. Chebyshev polynomials: Offer efficient approximation with minimized error in the maximum norm, making them useful for stable function representation. Rational function: Useful for approximating functions with singularities or sharp variations, as they can model asymptotic behavior better than polynomials. Fourier series: Capture periodic patterns effectively and are particularly useful in domains such as physics-informed machine learning. Wavelet functions (DoG, Mexican hat, Morlet, and Shannon): Used for feature extraction as they can capture both high-frequency and low-frequency data components. Piecewise linear functions: Provide efficient approximation for multivariate functions in KANs. == Usage == In some modern neural architectures like convolutional neural networks (CNNs), recurrent neural networks (RNNs), and Transformers, KANs are typically used as drop-in substitutes for MLP layers. Despite KANs' general-purpose design, researchers have created and used them for a number of tasks: Scientific machine learning (SciML): Function fitting, partial differential equations (PDEs) and physical/mathematical laws. Continual learning: KANs better preserve previously learned information during incremental updates, avoiding catastrophic forgetting due to the locality of spline adjustments. Graph neural networks: Extensions such as Kolmogorov–Arnold Graph Neural Networks (KA-GNNs) integrate KAN modules into message-passing architectures, showing improvements in molecular property prediction tasks. Sensor data processing: Kolmogorov–Arnold Networks (KANs) have recently been applied to sensor data processing due to their ability to model complex nonlinear relationships with relatively few parameters and improved interpretability compared to conventional multilayer perceptrons. Applications include industrial soft sensors, biomedical signal analysis, remote sensing, and environmental monitoring systems. == Drawbacks == KANs can be computationally intensive and require a large number of parameters due to their use of polynomial functions to capture data.

  Read more →
• 

  Semantic decomposition (natural language processing)

  A semantic decomposition is an algorithm that breaks down the meanings of phrases or concepts into less complex concepts. The result of a semantic decomposition is a representation of meaning. This representation can be used for tasks, such as those related to artificial intelligence or machine learning. Semantic decomposition is common in natural language processing applications. The basic idea of a semantic decomposition is taken from the learning skills of adult humans, where words are explained using other words. It is based on Meaning-text theory. Meaning-text theory is used as a theoretical linguistic framework to describe the meaning of concepts with other concepts. == Background == Given that an AI does not inherently have language, it is unable to think about the meanings behind the words of a language. An artificial notion of meaning needs to be created for a strong AI to emerge. Creating an artificial representation of meaning requires the analysis of what meaning is. Many terms are associated with meaning, including semantics, pragmatics, knowledge and understanding or word sense. Each term describes a particular aspect of meaning, and contributes to a multitude of theories explaining what meaning is. These theories need to be analyzed further to develop an artificial notion of meaning best fit for our current state of knowledge. == Graph representations == Representing meaning as a graph is one of the two ways that both an AI cognition and a linguistic researcher think about meaning (connectionist view). Logicians utilize a formal representation of meaning to build upon the idea of symbolic representation, whereas description logics describe languages and the meaning of symbols. This contention between 'neat' and 'scruffy' techniques has been discussed since the 1970s. Research has so far identified semantic measures and with that word-sense disambiguation (WSD) - the differentiation of meaning of words - as the main problem of language understanding. As an AI-complete environment, WSD is a core problem of natural language understanding. AI approaches that use knowledge-given reasoning creates a notion of meaning combining the state of the art knowledge of natural meaning with the symbolic and connectionist formalization of meaning for AI. The abstract approach is shown in Figure. First, a connectionist knowledge representation is created as a semantic network consisting of concepts and their relations to serve as the basis for the representation of meaning. This graph is built out of different knowledge sources like WordNet, Wiktionary, and BabelNET. The graph is created by lexical decomposition that recursively breaks each concept semantically down into a set of semantic primes. The primes are taken from the theory of Natural Semantic Metalanguage, which has been analyzed for usefulness in formal languages. Upon this graph marker passing is used to create the dynamic part of meaning representing thoughts. The marker passing algorithm, where symbolic information is passed along relations form one concept to another, uses node and edge interpretation to guide its markers. The node and edge interpretation model is the symbolic influence of certain concepts. Future work uses the created representation of meaning to build heuristics and evaluate them through capability matching and agent planning, chatbots or other applications of natural language understanding.

  Read more →
• 

  Symbolic regression

  Symbolic regression (SR) is a type of regression analysis that searches the space of mathematical expressions to find the model that best fits a given dataset, both in terms of accuracy and simplicity. No particular model is provided as a starting point for symbolic regression. Instead, initial expressions are formed by randomly combining mathematical building blocks such as mathematical operators, analytic functions, constants, and state variables. Usually, a subset of these primitives will be specified by the person operating it, but that's not a requirement of the technique. The symbolic regression problem for mathematical functions has been tackled with a variety of methods, including recombining equations most commonly using genetic programming, as well as more recent methods utilizing Bayesian methods and neural networks. Another non-classical alternative method to SR is called Universal Functions Originator (UFO), which has a different mechanism, search-space, and building strategy. Further methods such as Exact Learning attempt to transform the fitting problem into a moments problem in a natural function space, usually built around generalizations of the Meijer-G function. By not requiring a priori specification of a model, symbolic regression isn't affected by human bias, or unknown gaps in domain knowledge. It attempts to uncover the intrinsic relationships of the dataset, by letting the patterns in the data itself reveal the appropriate models, rather than imposing a model structure that is deemed mathematically tractable from a human perspective. The fitness function that drives the evolution of the models takes into account not only error metrics (to ensure the models accurately predict the data), but also special complexity measures, thus ensuring that the resulting models reveal the data's underlying structure in a way that's understandable from a human perspective. This facilitates reasoning and favors the odds of getting insights about the data-generating system, as well as improving generalisability and extrapolation behaviour by preventing overfitting. Accuracy and simplicity may be left as two separate objectives of the regression—in which case the optimum solutions form a Pareto front—or they may be combined into a single objective by means of a model selection principle such as minimum description length. It has been proven that symbolic regression is an NP-hard problem. Nevertheless, if the sought-for equation is not too complex it is possible to solve the symbolic regression problem exactly by generating every possible function (built from some predefined set of operators) and evaluating them on the dataset in question. == Difference from classical regression == While conventional regression techniques seek to optimize the parameters for a pre-specified model structure, symbolic regression avoids imposing prior assumptions, and instead infers the model from the data. In other words, it attempts to discover both model structures and model parameters. This approach has the disadvantage of having a much larger space to search, because not only the search space in symbolic regression is infinite, but there are an infinite number of models which will perfectly fit a finite data set (provided that the model complexity isn't artificially limited). This means that it will possibly take a symbolic regression algorithm longer to find an appropriate model and parametrization, than traditional regression techniques. This can be attenuated by limiting the set of building blocks provided to the algorithm, based on existing knowledge of the system that produced the data; but in the end, using symbolic regression is a decision that has to be balanced with how much is known about the underlying system. Nevertheless, this characteristic of symbolic regression also has advantages: because the evolutionary algorithm requires diversity in order to effectively explore the search space, the result is likely to be a selection of high-scoring models (and their corresponding set of parameters). Examining this collection could provide better insight into the underlying process, and allows the user to identify an approximation that better fits their needs in terms of accuracy and simplicity. == Benchmarking == === SRBench === In 2021, SRBench was proposed as a large benchmark for symbolic regression. In its inception, SRBench featured 14 symbolic regression methods, 7 other ML methods, and 252 datasets from PMLB. The benchmark intends to be a living project: it encourages the submission of improvements, new datasets, and new methods, to keep track of the state of the art in SR. === SRBench Competition 2022 === In 2022, SRBench announced the competition Interpretable Symbolic Regression for Data Science, which was held at the GECCO conference in Boston, MA. The competition pitted nine leading symbolic regression algorithms against each other on a novel set of data problems and considered different evaluation criteria. The competition was organized in two tracks, a synthetic track and a real-world data track. ==== Synthetic Track ==== In the synthetic track, methods were compared according to five properties: re-discovery of exact expressions; feature selection; resistance to local optima; extrapolation; and sensitivity to noise. Rankings of the methods were: QLattice PySR (Python Symbolic Regression) uDSR (Deep Symbolic Optimization) ==== Real-world Track ==== In the real-world track, methods were trained to build interpretable predictive models for 14-day forecast counts of COVID-19 cases, hospitalizations, and deaths in New York State. These models were reviewed by a subject expert and assigned trust ratings and evaluated for accuracy and simplicity. The ranking of the methods was: uDSR (Deep Symbolic Optimization) QLattice geneticengine (Genetic Engine) == Non-standard methods == Most symbolic regression algorithms prevent combinatorial explosion by implementing evolutionary algorithms that iteratively improve the best-fit expression over many generations. Recently, researchers have proposed algorithms utilizing other tactics in AI. Silviu-Marian Udrescu and Max Tegmark developed the "AI Feynman" algorithm, which attempts symbolic regression by training a neural network to represent the mystery function, then runs tests against the neural network to attempt to break up the problem into smaller parts. For example, if f ( x 1 , . . . , x i , x i + 1 , . . . , x n ) = g ( x 1 , . . . , x i ) + h ( x i + 1 , . . . , x n ) {\displaystyle f(x_{1},...,x_{i},x_{i+1},...,x_{n})=g(x_{1},...,x_{i})+h(x_{i+1},...,x_{n})} , tests against the neural network can recognize the separation and proceed to solve for g {\displaystyle g} and h {\displaystyle h} separately and with different variables as inputs. This is an example of divide and conquer, which reduces the size of the problem to be more manageable. AI Feynman also transforms the inputs and outputs of the mystery function in order to produce a new function which can be solved with other techniques, and performs dimensional analysis to reduce the number of independent variables involved. The algorithm was able to "discover" 100 equations from The Feynman Lectures on Physics, while a leading software using evolutionary algorithms, Eureqa, solved only 71. AI Feynman, in contrast to classic symbolic regression methods, requires a very large dataset in order to first train the neural network and is naturally biased towards equations that are common in elementary physics.

  Read more →
• 

  List of artificial intelligence journals

  This is a list of notable peer-reviewed academic journals that publish research in the field of artificial intelligence (AI), including areas such as machine learning, computer vision, natural language processing, robotics, and intelligent systems. == General artificial intelligence == Artificial Intelligence (journal) – Elsevier Journal of Artificial Intelligence Research (JAIR) – AI Access Foundation Knowledge-Based Systems – Elsevier == Machine learning == Data Mining and Knowledge Discovery – Springer Machine Learning (journal) – Springer Journal of Machine Learning Research – Microtome Pattern Recognition (journal) – Elsevier Neural Networks (journal) – Elsevier Neural Computation (journal) – MIT Press Neurocomputing (journal) - Elsevier == Deep learning and neural computation == IEEE Transactions on Evolutionary Computation – IEEE IEEE Transactions on Neural Networks and Learning Systems – IEEE Nature Machine Intelligence – Springer Nature == Computer vision == International Journal of Computer Vision – Springer IEEE Transactions on Pattern Analysis and Machine Intelligence – IEEE Machine Vision and Applications – Springer == Natural language processing == Computational Linguistics (journal) – MIT Press Natural Language Processing Transactions of the Association for Computational Linguistics – ACL == Robotics and intelligent systems == IEEE Transactions on Robotics – IEEE Autonomous Robots – Springer Journal of Intelligent & Robotic Systems – Springer == Interdisciplinary and ethics in AI == AI & Society – Springer Artificial Life – MIT Press Philosophy & Technology – Springer Minds and Machines – Springer

  Read more →