AI Chatbot Options

AI Chatbot Options — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Cloud manufacturing

  Cloud manufacturing (CMfg) is a new manufacturing paradigm developed from existing advanced manufacturing models (e.g., ASP, AM, NM, MGrid) and enterprise information technologies under the support of cloud computing, Internet of Things (IoT), virtualization and service-oriented technologies, and advanced computing technologies. It transforms manufacturing resources and manufacturing capabilities into manufacturing services, which can be managed and operated in an intelligent and unified way to enable the full sharing and circulating of manufacturing resources and manufacturing capabilities. CMfg can provide safe and reliable, high quality, cheap and on-demand manufacturing services for the whole lifecycle of manufacturing. The concept of manufacturing here refers to big manufacturing that includes the whole lifecycle of a product (e.g. design, simulation, production, test, maintenance). The concept of Cloud manufacturing was initially proposed by the research group led by Prof. Bo Hu Li and Prof. Lin Zhang in China in 2010. Related discussions and research were conducted hereafter, and some similar definitions (e.g. Cloud-Based Design and Manufacturing (CBDM). ) to cloud manufacturing were introduced. Cloud manufacturing is a type of parallel, networked, and distributed system consisting of an integrated and inter-connected virtualized service pool (manufacturing cloud) of manufacturing resources and capabilities as well as capabilities of intelligent management and on-demand use of services to provide solutions for all kinds of users involved in the whole lifecycle of manufacturing. == Types == Cloud Manufacturing can be divided into two categories. The first category concerns deploying manufacturing software on the Cloud, i.e. a “manufacturing version” of Computing. CAx software can be supplied as a service on the Manufacturing Cloud (MCloud). The second category has a broader scope, cutting across production, management, design and engineering abilities in a manufacturing business. Unlike with computing and data storage, manufacturing involves physical equipment, monitors, materials and so on. In this kind of Cloud Manufacturing system, both material and non-material facilities are implemented on the Manufacturing Cloud to support the whole supply chain. Costly resources are shared on the network. This means that the utilisation rate of rarely used equipment rises and the cost of expensive equipment is reduced. According to the concept of Cloud technology, there will not be direct interaction between Cloud Users and Service Providers. The Cloud User should neither manage nor control the infrastructure and manufacturing applications. As a matter of fact, the former can be considered part of the latter. In CMfg system, various manufacturing resources and abilities can be intelligently sensed and connected into wider Internet, and automatically managed and controlled using IoT technologies (e.g., RFID, wired and wireless sensor network, embedded system). Then the manufacturing resources and abilities are virtualized and encapsulated into different manufacturing cloud services (MCSs), that can be accessed, invoked, and deployed based on knowledge by using virtualization technologies, service-oriented technologies, and cloud computing technologies. The MCSs are classified and aggregated according to specific rules and algorithms, and different kinds of manufacturing clouds are constructed. Different users can search and invoke the qualified MCSs from related manufacturing cloud according to their needs, and assemble them to be a virtual manufacturing environment or solution to complete their manufacturing task involved in the whole life cycle of manufacturing processes under the support of cloud computing, service-oriented technologies, and advanced computing technologies. Four types of cloud deployment modes (public, private, community and hybrid clouds) are ubiquitous as a single point of access. Private cloud refers to a centralized management effort in which manufacturing services are shared within one company or its subsidiaries. Enterprises' mission-critical and core-business applications are often kept in a private cloud. Community cloud is a collaborative effort in which manufacturing services are shared between several organizations from a specific community with common concerns. Public cloud realizes the key concept of sharing services with the general public in a multi-tenant environment. Hybrid cloud is a composition of two or more clouds (private, community or public) that remain distinct entities but are also bound together, offering the benefits of multiple deployment modes. == Resources == From the resource’s perspective, each kind of manufacturing capability requires support from the related manufacturing resource. For each type of manufacturing capability, its related manufacturing resource comes in two forms, soft resources and hard resources. === Soft resources === Software: software applications throughout the product lifecycle including design, analysis, simulation, process planning, and are only beginning to be embraced by the electronics manufacturing industry. Knowledge: experience and know-how needed to complete a production task, i.e. engineering knowledge, product models, standards, evaluation procedures and results, customer feedback, and manufacturing in the cloud provides just as many solutions as the number of questions it also raises for manufacturing executives wanting to make the best possible decision. Skill: expertise in performing a specific manufacturing task. Personnel: human resource engaged in the manufacturing process, i.e. designers, operators, managers, technicians, project teams, customer service, etc. Experience: performance, quality, client evaluation, etc. Business Network: business relationships and business opportunity networks that exist in an enterprise. === Hard resources === Manufacturing Equipment: facilities needed for completing a manufacturing task, e.g. machine tools, cutters, test and monitoring equipment and other fabrication tools. Monitoring/Control Resource: devices used to identify and control other manufacturing resource, for instance, RFID (Radio-Frequency IDentification), WSN (Wireless Sensor Network), virtual managers and remote controllers. Computational Resource: computing devices to support production process, e.g. servers, computers, storage media, control devices, etc. Materials: inputs and outputs in a production system, e.g. raw material, product-in-progress, finished product, power, water, lubricants, etc. Storage: automated storage and retrieval systems, logic controllers, location of warehouses, volume capacity and schedule/optimization methods. Transportation: movement of manufacturing inputs/outputs from one location to another. It includes the modes of transport, e.g. air, rail, road, water, cable, pipeline and space, and the related price, and time taken.

  Read more →
• 

  Artificial development

  Artificial development, also known as artificial embryogeny or machine intelligence or computational development, is an area of computer science and engineering concerned with computational models motivated by genotype–phenotype mappings in biological systems. Artificial development is often considered a sub-field of evolutionary computation, although the principles of artificial development have also been used within stand-alone computational models. Within evolutionary computation, the need for artificial development techniques was motivated by the perceived lack of scalability and evolvability of direct solution encodings (Tufte, 2008). Artificial development entails indirect solution encoding. Rather than describing a solution directly, an indirect encoding describes (either explicitly or implicitly) the process by which a solution is constructed. Often, but not always, these indirect encodings are based upon biological principles of development such as morphogen gradients, cell division and cellular differentiation (e.g. Doursat 2008), gene regulatory networks (e.g. Guo et al., 2009), degeneracy (Whitacre et al., 2010), grammatical evolution (de Salabert et al., 2006), or analogous computational processes such as re-writing, iteration, and time. The influences of interaction with the environment, spatiality and physical constraints on differentiated multi-cellular development have been investigated more recently (e.g. Knabe et al. 2008). Artificial development approaches have been applied to a number of computational and design problems, including electronic circuit design (Miller and Banzhaf 2003), robotic controllers (e.g. Taylor 2004), and the design of physical structures (e.g. Hornby 2004).

  Read more →
• 

  Calibration (statistics)

  There are two main uses of the term calibration in statistics that denote special types of statistical inference problems. Calibration can mean a reverse process to regression, where instead of a future dependent variable being predicted from known explanatory variables, a known observation of the dependent variables is used to predict a corresponding explanatory variable; procedures in statistical classification to determine class membership probabilities which assess the uncertainty of a given new observation belonging to each of the already established classes. In addition, calibration is used in statistics with the usual general meaning of calibration. For example, model calibration can be also used to refer to Bayesian inference about the value of a model's parameters, given some data set, or more generally to any type of fitting of a statistical model. As Philip Dawid puts it, "a forecaster is well calibrated if, for example, of those events to which he assigns a probability 30 percent, the long-run proportion that actually occurs turns out to be 30 percent." == In classification == Calibration in classification means transforming classifier scores into class membership probabilities. An overview of calibration methods for two-class and multi-class classification tasks is given by Gebel (2009). A classifier might separate the classes well, but be poorly calibrated, meaning that the estimated class probabilities are far from the true class probabilities. In this case, a calibration step may help improve the estimated probabilities. A variety of metrics exist that are aimed to measure the extent to which a classifier produces well-calibrated probabilities. Foundational work includes the Expected Calibration Error (ECE). Into the 2020s, variants include the Adaptive Calibration Error (ACE) and the Test-based Calibration Error (TCE), which address limitations of the ECE metric that may arise when classifier scores concentrate on narrow subset of the [0,1] range. A 2020s advancement in calibration assessment is the introduction of the Estimated Calibration Index (ECI). The ECI extends the concepts of the Expected Calibration Error (ECE) to provide a more nuanced measure of a model's calibration, particularly addressing overconfidence and underconfidence tendencies. Originally formulated for binary settings, the ECI has been adapted for multiclass settings, offering both local and global insights into model calibration. This framework aims to overcome some of the theoretical and interpretative limitations of existing calibration metrics. Through a series of experiments, Famiglini et al. demonstrate the framework's effectiveness in delivering a more accurate understanding of model calibration levels and discuss strategies for mitigating biases in calibration assessment. An online tool has been proposed to compute both ECE and ECI. The following univariate calibration methods exist for transforming classifier scores into class membership probabilities in the two-class case: Assignment value approach, see Garczarek (2002) Bayes approach, see Bennett (2002) Isotonic regression, see Zadrozny and Elkan (2002) Platt scaling (a form of logistic regression), see Lewis and Gale (1994) and Platt (1999) Bayesian Binning into Quantiles (BBQ) calibration, see Naeini, Cooper, Hauskrecht (2015) Beta calibration, see Kull, Filho, Flach (2017) === In probability prediction and forecasting === In prediction and forecasting, a Brier score is sometimes used to assess prediction accuracy of a set of predictions, specifically that the magnitude of the assigned probabilities track the relative frequency of the observed outcomes. Philip E. Tetlock employs the term "calibration" in this sense in his 2015 book Superforecasting. This differs from accuracy and precision. For example, as expressed by Daniel Kahneman, "if you give all events that happen a probability of .6 and all the events that don't happen a probability of .4, your discrimination is perfect but your calibration is miserable". In meteorology, in particular, as concerns weather forecasting, a related mode of assessment is known as forecast skill. == In regression == The calibration problem in regression is the use of known data on the observed relationship between a dependent variable and an independent variable to make estimates of other values of the independent variable from new observations of the dependent variable. This can be known as "inverse regression"; there is also sliced inverse regression. The following multivariate calibration methods exist for transforming classifier scores into class membership probabilities in the case with classes count greater than two: Reduction to binary tasks and subsequent pairwise coupling, see Hastie and Tibshirani (1998) Dirichlet calibration, see Gebel (2009) === Example === One example is that of dating objects, using observable evidence such as tree rings for dendrochronology or carbon-14 for radiometric dating. The observation is caused by the age of the object being dated, rather than the reverse, and the aim is to use the method for estimating dates based on new observations. The problem is whether the model used for relating known ages with observations should aim to minimise the error in the observation, or minimise the error in the date. The two approaches will produce different results, and the difference will increase if the model is then used for extrapolation at some distance from the known results.

  Read more →
• 

  L-1 Identity Solutions

  L-1 Identity Solutions, Inc. was an American biometric technology company headquartered in Stamford, Connecticut, specializing in identity management products and services including facial recognition systems, fingerprint readers, and secure credentialing solutions for governments and commercial enterprises. The company's shares traded on the New York Stock Exchange under the ticker symbol "ID." == History == L-1 Identity Solutions was formed on August 29, 2006, from a merger of Viisage Technology, Inc. and Identix Incorporated. Prior to the Safran acquisition, L-1 divested its Intelligence Services Group (ISG) comprising SpecTal LLC, Advanced Concepts Inc., and McClendon LLC to BAE Systems, Inc. for approximately $297 million. The transaction, initially announced in September 2010, closed on February 15, 2011, with more than 1,000 ISG employees joining BAE Systems' Intelligence & Security sector. It specializes in selling face recognition systems, electronic passports, such as Fly Clear, and other biometric technology to governments such as the United States and Saudi Arabia. It also licenses technology to other companies internationally, including China. On July 26, 2011, Safran (NYSE Euronext Paris: SAF) acquired L-1 Identity Solutions, Inc. for a total cash amount of USD 1.09 billion. L-1 was part of Morpho's MorphoTrust department which rebranded to Idemia in 2017. Bioscrypt is a biometrics research, development and manufacturing company purchased by L-1 Identity Solutions. It provides fingerprint IP readers for physical access control systems, Facial recognition system readers for contactless access control authentication and OEM fingerprint modules for embedded applications. According to IMS Research, Bioscrypt has been the world market leader in biometric access control for enterprises (since 2006) with a worldwide market share of over 13%. In 2011, Bioscrypt was sold to Safran Morpho.

  Read more →
• 

  Fyre (software)

  Fyre, formerly de Jong Explorer, is a cross-platform tool for producing artwork based on histograms of iterated chaotic functions. It implements the Peter de Jong map in a fixed function pipeline through either a GTK GUI frontend, or a command line facility for easier rendering of high-resolution, high quality images. The program was renamed from de Jong Explorer to Fyre simply because 'It wasn't taken yet' and so that in the future, it could support more functions than just the standard Peter de Jong map. Fyre features a sidebar on the left to which the user can input the required variables and on the right is displayed the result of the equation. == Extra features == Additional image manipulation tools such as Gaussian blurs and Gamma controls are included in the program. The advantage to using them directly within Fyre is that the image accuracy and quality do not decline. Fyre features animation capabilities so that a user can link together several maps and create uncompressed AVIs from them. However, the uncompressed animation files are very large and so should be compressed with a separate tool, such as mencoder. == Peter de Jong Map == For most values of a,b,c and d the point (x,y) moves chaotically. The resulting image is a map of the probability that the point lies within the area represented by each pixel. Therefore, the longer that the user lets Fyre render for, the larger the probability map becomes and the more accurate the resulting image.

  Read more →
• 

  Ordination (statistics)

  Ordination or gradient analysis, in multivariate analysis, is a method complementary to data clustering, and used mainly in exploratory data analysis (rather than in hypothesis testing). In contrast to cluster analysis, ordination orders quantities in a (usually lower-dimensional) latent space. In the ordination space, quantities that are near each other share attributes (i.e., are similar to some degree), and dissimilar objects are farther from each other. Such relationships between the objects, on each of several axes or latent variables, are then characterized numerically and/or graphically in a biplot. The first ordination method, principal components analysis, was suggested by Karl Pearson in 1901. == Methods == Ordination methods can broadly be categorized in eigenvector-, algorithm-, or model-based methods. Many classical ordination techniques, including principal components analysis, correspondence analysis (CA) and its derivatives (detrended correspondence analysis, canonical correspondence analysis, and redundancy analysis, belong to the first group). The second group includes some distance-based methods such as non-metric multidimensional scaling, and machine learning methods such as T-distributed stochastic neighbor embedding and nonlinear dimensionality reduction. The third group includes model-based ordination methods, which can be considered as multivariate extensions of Generalized Linear Models. Model-based ordination methods are more flexible in their application than classical ordination methods, so that it is for example possible to include random-effects. Unlike in the aforementioned two groups, there is no (implicit or explicit) distance measure in the ordination. Instead, a distribution needs to be specified for the responses as is typical for statistical models. These and other assumptions, such as the assumed mean-variance relationship, can be validated with the use of residual diagnostics, unlike in other ordination methods. == Applications == Ordination can be used on the analysis of any set of multivariate objects. It is frequently used in several environmental or ecological sciences, particularly plant community ecology. It is also used in genetics and systems biology for microarray data analysis and in psychometrics.

  Read more →
• 

  Language identification in the limit

  Language identification in the limit is a formal model for inductive inference of formal languages, mainly by computers (see machine learning and induction of regular languages). It was introduced by E. Mark Gold in a technical report and a journal article with the same title. In this model, a teacher provides to a learner some presentation (i.e. a sequence of strings) of some formal language. The learning is seen as an infinite process. Each time the learner reads an element of the presentation, it should provide a representation (e.g. a formal grammar) for the language. Gold defines that a learner can identify in the limit a class of languages if, given any presentation of any language in the class, the learner will produce only a finite number of wrong representations, and then stick with the correct representation. However, the learner need not be able to announce its correctness; and the teacher might present a counterexample to any representation arbitrarily long after. Gold defined two types of presentations: Text (positive information): an enumeration of all strings the language consists of. Complete presentation (positive and negative information): an enumeration of all possible strings, each with a label indicating if the string belongs to the language or not. == Learnability == This model is an early attempt to formally capture the notion of learnability. Gold's journal article introduces for contrast the stronger models Finite identification (where the learner has to announce correctness after a finite number of steps), and Fixed-time identification (where correctness has to be reached after an apriori-specified number of steps). A weaker formal model of learnability is the Probably approximately correct learning (PAC) model, introduced by Leslie Valiant in 1984. == Examples == It is instructive to look at concrete examples (in the tables) of learning sessions the definition of identification in the limit speaks about. A fictitious session to learn a regular language L over the alphabet {a,b} from text presentation:In each step, the teacher gives a string belonging to L, and the learner answers a guess for L, encoded as a regular expression. In step 3, the learner's guess is not consistent with the strings seen so far; in step 4, the teacher gives a string repeatedly. After step 6, the learner sticks to the regular expression (ab+ba). If this happens to be a description of the language L the teacher has in mind, it is said that the learner has learned that language.If a computer program for the learner's role would exist that was able to successfully learn each regular language, that class of languages would be identifiable in the limit. Gold has shown that this is not the case. A particular learning algorithm always guessing L to be just the union of all strings seen so far:If L is a finite language, the learner will eventually guess it correctly, however, without being able to tell when. Although the guess didn't change during step 3 to 6, the learner couldn't be sure to be correct.Gold has shown that the class of finite languages is identifiable in the limit, however, this class is neither finitely nor fixed-time identifiable. Learning from complete presentation by telling:In each step, the teacher gives a string and tells whether it belongs to L (green) or not (red, struck-out). Each possible string is eventually classified in this way by the teacher. Learning from complete presentation by request:The learner gives a query string, the teacher tells whether it belongs to L (yes) or not (no); the learner then gives a guess for L, followed by the next query string. In this example, the learner happens to query in each step just the same string as given by the teacher in example 3.In general, Gold has shown that each language class identifiable in the request-presentation setting is also identifiable in the telling-presentation setting, since the learner, instead of querying a string, just needs to wait until it is eventually given by the teacher. == Gold's theorem == More formally, a language L {\displaystyle L} is a nonempty set, and its elements are called sentences. a language family is a set of languages. a language-learning environment E {\displaystyle E} for a language L {\displaystyle L} is a stream of sentences from L {\displaystyle L} , such that each sentence in L {\displaystyle L} appears at least once. a language learner is a function f {\displaystyle f} that sends a list of sentences to a language. This is interpreted as saying that, after seeing sentences a 1 , a 2 . . . , a n {\displaystyle a_{1},a_{2}...,a_{n}} in that order, the language learner guesses that the language that produces the sentences should be f ( a 1 , . . . , a n ) {\displaystyle f(a_{1},...,a_{n})} . Note that the learner is not obliged to be correct — it could very well guess a language that does not even contain a 1 , . . . , a n {\displaystyle a_{1},...,a_{n}} . a language learner f {\displaystyle f} learns a language L {\displaystyle L} in environment E = ( a 1 , a 2 , . . . ) {\displaystyle E=(a_{1},a_{2},...)} if the learner always guesses L {\displaystyle L} after seeing enough examples from the environment. a language learner f {\displaystyle f} learns a language L {\displaystyle L} if it learns L {\displaystyle L} in any environment E {\displaystyle E} for L {\displaystyle L} . a language family is learnable if there exists a language learner that can learn all languages in the family. Notes: In the context of Gold's theorem, sentences need only be distinguishable. They need not be anything in particular, such as finite strings (as usual in formal linguistics). Learnability is not a concept for individual languages. Any individual language L {\displaystyle L} could be learned by a trivial learner that always guesses L {\displaystyle L} . Learnability is not a concept for individual learners. A language family is learnable if, and only if, there exists some learner that can learn the family. It does not matter how well the learner performs for learning languages outside the family. Gold's theorem is easily bypassed if negative examples are allowed. In particular, the language family { L 1 , L 2 , . . . , L ∞ } {\displaystyle \{L_{1},L_{2},...,L_{\infty }\}} can be learned by a learner that always guesses L ∞ {\displaystyle L_{\infty }} until it receives the first negative example ¬ a n {\displaystyle \neg a_{n}} , where a n ∈ L n + 1 ∖ L n {\displaystyle a_{n}\in L_{n+1}\setminus L_{n}} , at which point it always guesses L n {\displaystyle L_{n}} . == Learnability characterization == Dana Angluin gave the characterizations of learnability from text (positive information) in a 1980 paper. If a learner is required to be effective, then an indexed class of recursive languages is learnable in the limit if there is an effective procedure that uniformly enumerates tell-tales for each language in the class (Condition 1). It is not hard to see that if an ideal learner (i.e., an arbitrary function) is allowed, then an indexed class of languages is learnable in the limit if each language in the class has a tell-tale (Condition 2). == Language classes learnable in the limit == The table shows which language classes are identifiable in the limit in which learning model. On the right-hand side, each language class is a superclass of all lower classes. Each learning model (i.e. type of presentation) can identify in the limit all classes below it. In particular, the class of finite languages is identifiable in the limit by text presentation (cf. Example 2 above), while the class of regular languages is not. Pattern Languages, introduced by Dana Angluin in another 1980 paper, are also identifiable by normal text presentation; they are omitted in the table, since they are above the singleton and below the primitive recursive language class, but incomparable to the classes in between. == Sufficient conditions for learnability == Condition 1 in Angluin's paper is not always easy to verify. Therefore, people come up with various sufficient conditions for the learnability of a language class. See also Induction of regular languages for learnable subclasses of regular languages. === Finite thickness === A class of languages has finite thickness if every non-empty set of strings is contained in at most finitely many languages of the class. This is exactly Condition 3 in Angluin's paper. Angluin showed that if a class of recursive languages has finite thickness, then it is learnable in the limit. A class with finite thickness certainly satisfies MEF-condition and MFF-condition; in other words, finite thickness implies M-finite thickness. === Finite elasticity === A class of languages is said to have finite elasticity if for every infinite sequence of strings s 0 , s 1 , . . . {\displaystyle s_{0},s_{1},...} and every infinite sequence of languages in the class L 1 , L 2 , . . . {\displaystyle L_{1},L_{2},...} , there exists a finite number n such

  Read more →
• 

  European Conference on Computer Vision

  The European Conference on Computer Vision (ECCV) is a biennial research conference with the proceedings published by Springer Science+Business Media. Similar to ICCV in scope and quality, it is held those years which ICCV is not. It is considered to be one of the top conferences in computer vision, alongside CVPR and ICCV, with an 'A' rating from the Australian Ranking of ICT Conferences and an 'A1' rating from the Brazilian ministry of education. The acceptance rate for ECCV 2010 was 24.4% for posters and 3.3% for oral presentations. Like other top computer vision conferences, ECCV has tutorial talks, technical sessions, and poster sessions. The conference is usually spread over five to six days with the main technical program occupying three days in the middle, and tutorial and workshops, focused on specific topics, being held in the beginning and at the end. The ECCV presents the Koenderink Prize annually to recognize fundamental contributions in computer vision. == Location == The conference is usually held in autumn in Europe.

  Read more →
• 

  Paint.NET

  Paint.NET (sometimes stylized as paint.net) is a freeware general-purpose raster graphics editor program for Microsoft Windows, developed with the .NET platform. Paint.NET was originally created by Rick Brewster as a Washington State University student project, and has evolved from a simple replacement for the Microsoft Paint program into a program for editing mainly graphics, with support for plugins. == History == Paint.NET originated as a computer science senior design project by Rick Brewster during spring 2004 at Washington State University. Version 1.0 consisted of 36,000 lines of code and was written in four months. In contrast, version 3.35 has approximately 162,000 lines of code. The Paint.NET project continued over the summer and into the autumn 2004 semester for both the version 1.1 and 2.0 releases. Development continued with one programmer who worked on previous versions of Paint.NET while he was a student at WSU. As of May 2006 the program had been downloaded at least 2 million times, at a rate of about 180,000 per month. Initially, Paint.NET was released under a modified version of the MIT License, with the exclusion of the installer, text, and graphics. However, citing issues with the open source code being plagiarized by others that had rebranded the software as their own and bundled user content without their permission, the availability of the source code was restricted, in December 2007 Brewster announced his intent to restrict access to components of the program (including its installer, resources, and user interface). In November 2009, the software was made proprietary, restricting the sale or creation of derivative works of the software. Starting with version 4.0.18, Paint.NET is published in two editions: A classic edition remains freeware, similar to all other versions since 3.5. Another edition, however, is published to Microsoft Store under a trialware license and is available to purchase for US$14.99. According to the developer, this was done to enable the users to contribute to the development with more convenience, even though the old avenue of donation was not closed. In May 2026, Brewster revealed that he obtained the paint.net domain after attempting to do so for 22 years. Historically, the editor was hosted on getpaint.net, and according to Brewster, the previous owners of paint.net would not sell the domain and asked for "lots and lots of money". In December of the previous year, paint.net began hosting content that impersonated Paint.NET, therefore becoming a clear case of trademark infringement and domain squatting. Brewster stated that he was able to obtain the domain afterwards with the help of a lawyer. == Overview == Paint.NET is primarily programmed in the C# programming language. Its native image format, .PDN, is a compressed representation of the application's internal object format, which preserves layering and other information. == Plugins == Paint.NET supports plugins, which add image adjustments, effects, and support for additional file types. They can be programmed using any .NET Framework programming language, though they are most commonly written in C#. These are created by volunteer coders on the program's discussion board, the Paint.NET Forum. Though most are simply published via the discussion board, some have been included with a later release of the program. For instance, a DirectDraw Surface file type plugin, (originally by Dean Ashton) and an Ink Sketch and Soften Portrait effect (originally by David Issel) were added to Paint.NET in version 3.10. Hundreds of plugins have been produced; such as Shape3D, which renders a 2D drawing into a 3D shape. Some plugins expand on the functionality that comes with Paint.NET, such as Curves+ and Sharpen+, which extend the included tools Curves and Sharpen, respectively. Examples of file type plugins include an Animated Cursor and Icon plugin and an Adobe Photoshop file format plugin. Several of these plugins are based on existing open source software, such as a raw image format plugin that uses dcraw and a PNG optimization plugin that uses OptiPNG. == Forks == === paint-mono === Paint.NET was created exclusively for Windows and has no native support for other operating systems. Due to its former open-source licensing, the development of alternative versions was possible. In May 2007, Miguel de Icaza officially started a porting project called paint-mono. This project had partially ported Paint.NET 3.0 to Mono, an open-source implementation of the Common Language Infrastructure on which the .NET Framework is based. This allowed Paint.NET to be run on Mono-supported platforms, such as Linux. This port is no longer maintained and has not been updated since March 2009. Newer Mono runtime 6 versions are able to run original Paint.NET releases up to 3.5.11 with only minor issues. === Pinta === In 2010, developer Jonathan Pobst started a project called Pinta, describing it as a clone of Paint.NET for Mono and Gtk#. Pinta reused the adjustments and effects code from Paint.NET but otherwise is original code.

  Read more →
• 

  Generalized multidimensional scaling

  Generalized multidimensional scaling (GMDS) is an extension of metric multidimensional scaling, in which the target space is non-Euclidean. When the dissimilarities are distances on a surface and the target space is another surface, GMDS allows finding the minimum-distortion embedding of one surface into another. GMDS is an emerging research direction. Currently, main applications are recognition of deformable objects (e.g. for three-dimensional face recognition) and texture mapping.

  Read more →
• 

  Density-based clustering validation

  Density-Based Clustering Validation (DBCV) is a metric designed to assess the quality of clustering solutions, particularly for density-based clustering algorithms like DBSCAN, Mean shift, and OPTICS. This metric is particularly suited for identifying concave and nested clusters, where traditional metrics such as the Silhouette coefficient, Davies–Bouldin index, or Calinski–Harabasz index often struggle to provide meaningful evaluations. Unlike traditional validation measures, which often rely on compact and well-separated clusters, DBCV index evaluates how well clusters are defined in terms of local density variations and structural coherence. This metric was introduced in 2014 by David Moulavi and colleagues in their work. It utilizes density connectivity principles to quantify clustering structures, making it especially effective at detecting arbitrarily shaped clusters in concave datasets, where traditional metrics may be less reliable. The DBCV index has been employed for clustering analysis in bioinformatics, ecology, techno-economy, and health informatics , as well as in numerous other fields. == Definition == DBCV index evaluates clustering structures by analyzing the relationships between data points within and across clusters. Given a dataset X = x 1 , x 2 , . . . , x n {\displaystyle X={x_{1},x_{2},...,x_{n}}} , a density-based algorithm partitions it into K clusters C 1 , C 2 , . . . , C K {\displaystyle {C_{1},C_{2},...,C_{K}}} . Each point x i {\displaystyle x_{i}} belongs to a specific cluster, denoted as C c l u s t e r ( x i ) {\displaystyle C_{cluster(x_{i})}} A key concept in DBCV index is the notion of density-connected paths. Two points within the same cluster are considered density-connected if there exists a sequence of intermediate points linking them, where each consecutive pair meets a predefined density criterion. The density-based distance between two points is determined by identifying the optimal path that minimizes the maximum local reachability distance along its trajectory. DBCV index extends the Silhouette coefficient by redefining cluster cohesion and separation using density-based distances: Within-cluster density distance measures how closely a point is related to other members of its cluster: a i = 1 | C c l u s t e r ( x i ) | − 1 ∑ x j ∈ C c l u s t e r ( x i ) , y ≠ x d d e n s i t y ( x j , x i ) {\displaystyle a_{i}={\frac {1}{|C_{cluster(x_{i})}|-1}}\sum _{x_{j}\in C_{cluster(x_{i})},y\neq x}d_{density}(x_{j},x_{i})} Nearest-cluster density distance quantifies how far a point is from the closest external cluster: b i = min C ≠ C cluster ( x i ) C ∈ { C 1 , … , C K } ( 1 | C | ∑ x j ∈ C d density ( x i , x j ) ) . {\displaystyle b_{i}=\min _{C\neq C_{{\text{cluster}}(x_{i})} \atop C\in \{C_{1},\dots ,C_{K}\}}\left({\frac {1}{|C|}}\sum _{x_{j}\in C}d_{\text{density}}(x_{i},x_{j})\right).} Using these measures, the DBCV index is computed as: D B C V = 1 n ∑ i = 1 n b i − a i max ( a i , b i ) {\displaystyle DBCV={\frac {1}{n}}\sum _{i=1}^{n}{\frac {b_{i}-a_{i}}{\max(a_{i},b_{i})}}} == Explanation == DBCV index values range between −1 and +1: +1: Strongly cohesive and well-separated clusters. 0: Ambiguous clustering structure. −1: Poorly formed clusters or incorrect assignments. By leveraging density-based distances instead of traditional Euclidean measures, DBCV index provides a more robust evaluation of clustering performance in datasets with irregular or non-spherical distributions.

  Read more →
• 

  Robust principal component analysis

  Robust Principal Component Analysis (RPCA) is a modification of the widely used statistical procedure of principal component analysis (PCA) which works well with respect to grossly corrupted observations. A number of different approaches exist for Robust PCA, including an idealized version of Robust PCA, which aims to recover a low-rank matrix L0 from highly corrupted measurements M = L0 +S0. This decomposition in low-rank and sparse matrices can be achieved by techniques such as Principal Component Pursuit method (PCP), Stable PCP, Quantized PCP, Block based PCP, and Local PCP. Then, optimization methods are used such as the Augmented Lagrange Multiplier Method (ALM), Alternating Direction Method (ADM), Fast Alternating Minimization (FAM), Iteratively Reweighted Least Squares (IRLS ) or alternating projections (AP). == Algorithms == === Non-convex method === The 2014 guaranteed algorithm for the robust PCA problem (with the input matrix being M = L + S {\displaystyle M=L+S} ) is an alternating minimization type algorithm. The computational complexity is O ( m n r 2 log ⁡ 1 ϵ ) {\displaystyle O\left(mnr^{2}\log {\frac {1}{\epsilon }}\right)} where the input is the superposition of a low-rank (of rank r {\displaystyle r} ) and a sparse matrix of dimension m × n {\displaystyle m\times n} and ϵ {\displaystyle \epsilon } is the desired accuracy of the recovered solution, i.e., ‖ L ^ − L ‖ F ≤ ϵ {\displaystyle \|{\widehat {L}}-L\|_{F}\leq \epsilon } where L {\displaystyle L} is the true low-rank component and L ^ {\displaystyle {\widehat {L}}} is the estimated or recovered low-rank component. Intuitively, this algorithm performs projections of the residual onto the set of low-rank matrices (via the SVD operation) and sparse matrices (via entry-wise hard thresholding) in an alternating manner - that is, low-rank projection of the difference the input matrix and the sparse matrix obtained at a given iteration followed by sparse projection of the difference of the input matrix and the low-rank matrix obtained in the previous step, and iterating the two steps until convergence. This alternating projections algorithm is later improved by an accelerated version, coined AccAltProj. The acceleration is achieved by applying a tangent space projection before projecting the residue onto the set of low-rank matrices. This trick improves the computational complexity to O ( m n r log ⁡ 1 ϵ ) {\displaystyle O\left(mnr\log {\frac {1}{\epsilon }}\right)} with a much smaller constant in front while it maintains the theoretically guaranteed linear convergence. Another fast version of accelerated alternating projections algorithm is IRCUR. It uses the structure of CUR decomposition in alternating projections framework to dramatically reduces the computational complexity of RPCA to O ( max { m , n } r 2 log ⁡ ( m ) log ⁡ ( n ) log ⁡ 1 ϵ ) {\displaystyle O\left(\max\{m,n\}r^{2}\log(m)\log(n)\log {\frac {1}{\epsilon }}\right)} === Convex relaxation === This method consists of relaxing the rank constraint r a n k ( L ) {\displaystyle rank(L)} in the optimization problem to the nuclear norm ‖ L ‖ ∗ {\displaystyle \|L\|_{}} and the sparsity constraint ‖ S ‖ 0 {\displaystyle \|S\|_{0}} to ℓ 1 {\displaystyle \ell _{1}} -norm ‖ S ‖ 1 {\displaystyle \|S\|_{1}} . The resulting program can be solved using methods such as the method of Augmented Lagrange Multipliers. === Deep-learning augmented method === Some recent works propose RPCA algorithms with learnable/training parameters. Such a learnable/trainable algorithm can be unfolded as a deep neural network whose parameters can be learned via machine learning techniques from a given dataset or problem distribution. The learned algorithm will have superior performance on the corresponding problem distribution. == Applications == RPCA has many real life important applications particularly when the data under study can naturally be modeled as a low-rank plus a sparse contribution. Following examples are inspired by contemporary challenges in computer science, and depending on the applications, either the low-rank component or the sparse component could be the object of interest: === Video surveillance === Given a sequence of surveillance video frames, it is often required to identify the activities that stand out from the background. If we stack the video frames as columns of a matrix M, then the low-rank component L0 naturally corresponds to the stationary background and the sparse component S0 captures the moving objects in the foreground. === Face recognition === Images of a convex, Lambertian surface under varying illuminations span a low-dimensional subspace. This is one of the reasons for effectiveness of low-dimensional models for imagery data. In particular, it is easy to approximate images of a human's face by a low-dimensional subspace. To be able to correctly retrieve this subspace is crucial in many applications such as face recognition and alignment. It turns out that RPCA can be applied successfully to this problem to exactly recover the face.

  Read more →
• 

  Screen generator

  A screen generator, also known as a screen painter, screen mapper, or forms generator is a software package (or component thereof) which enables data entry screens to be generated declaratively, by "painting" them on the screen WYSIWYG-style, or through filling-in forms, rather than requiring writing of code to display them manually. 4GLs commonly incorporate a screen generator feature. They are also commonly found bundled with database systems, especially entry-level databases. A screen generator is one aspect of an application generator, which can also include other functions such as report generation and a data dictionary. The earliest screen generators were character-based; by the 1990s, GUI support became common, and then support for generating HTML forms as well. Some screen generators work by generating code to display the screen in a high-level language (for example, COBOL); others store the screen definition in a data file or in database tables, and then have a runtime component responsible for actually displaying the form and receiving and validating user input. == Examples == Examples of screen generators include: IBM Screen Definition Facility II: generates screens for CICS BMS, IMS MFS, ISPF, GDDM and CSP/AD. Performix for Informix. Microsoft Visual Basic the forms component of Microsoft Access Oracle Developer, in particular its Oracle Forms component the QDesign component of PowerHouse SystemBuilder/SB+ the Screen Painter component of SAP's ABAP Workbench the FoxView component of FoxPro. FoxView was originally developed by Luis Castro as a dBASE screen generator named ViewGen; Fox purchased it and bundled it with FoxPro 1.0. Later, Fox replaced Castro's code with their own screen painter code. dBASE included a built-in screen generator in dBASE IV onwards; in dBASE III and earlier, third party screen generators were available, including the already mentioned ViewGen DPS 1100 for UNIVAC 1100 series mainframes.

  Read more →
• 

  Spiking neural network

  Spiking neural networks (SNNs) are artificial neural networks (ANN) that mimic natural neural networks. These models leverage timing of discrete spikes as the main information carrier. In addition to neuronal and synaptic state, SNNs incorporate the concept of time into their operating model. The idea is that neurons in the SNN do not transmit information at each propagation cycle (as it happens with typical multi-layer perceptron networks), but rather transmit information only when a membrane potential—an intrinsic quality of the neuron related to its membrane electrical charge—reaches a specific value, called the threshold. When the membrane potential reaches the threshold, the neuron fires, and generates a signal that travels to other neurons which, in turn, increase or decrease their potentials in response to this signal. A neuron model that fires at the moment of threshold crossing is also called a spiking neuron model. While spike rates can be considered the analogue of the variable output of a traditional ANN, neurobiology research indicated that high speed processing cannot be performed solely through a rate-based scheme. For example humans can perform an image recognition task requiring no more than 10ms of processing time per neuron through the successive layers (going from the retina to the temporal lobe). This time window is too short for rate-based encoding. The precise spike timings in a small set of spiking neurons also has a higher information coding capacity compared with a rate-based approach. The most prominent spiking neuron model is the leaky integrate-and-fire model. In that model, the momentary activation level (modeled as a differential equation) is normally considered to be the neuron's state, with incoming spikes pushing this value higher or lower, until the state eventually either decays or—if the firing threshold is reached—the neuron fires. After firing, the state variable is reset to a lower value. Various decoding methods exist for interpreting the outgoing spike train as a real-value number, relying on either the frequency of spikes (rate-code), the time-to-first-spike after stimulation, or the interval between spikes. == History == Many multi-layer artificial neural networks are fully connected, receiving input from every neuron in the previous layer and signalling every neuron in the subsequent layer. Although these networks have achieved breakthroughs, they do not match biological networks and do not mimic neurons. The biology-inspired Hodgkin–Huxley model of a spiking neuron was proposed in 1952. This model described how action potentials are initiated and propagated. Communication between neurons, which requires the exchange of chemical neurotransmitters in the synaptic gap, is described in models such as the integrate-and-fire model, FitzHugh–Nagumo model (1961–1962), and Hindmarsh–Rose model (1984). The leaky integrate-and-fire model (or a derivative) is commonly used as it is easier to compute than Hodgkin–Huxley. While the notion of an artificial spiking neural network became popular only in the twenty-first century, studies between 1980 and 1995 supported the concept. The first models of this type of ANN appeared to simulate non-algorithmic intelligent information processing systems. However, the notion of the spiking neural network as a mathematical model was first worked on in the early 1970s. As of 2019 SNNs lagged behind ANNs in accuracy, but the gap is decreasing, and has vanished on some tasks. == Underpinnings == Information in the brain is represented as action potentials (neuron spikes), which may group into spike trains or coordinated waves. A fundamental question of neuroscience is to determine whether neurons communicate by a rate or temporal code. Temporal coding implies that a single spiking neuron can replace hundreds of hidden units on a conventional neural net. SNNs define a neuron's current state as its potential (possibly modeled as a differential equation). An input pulse causes the potential to rise and then gradually decline. Encoding schemes can interpret these pulse sequences as a number, considering pulse frequency and pulse interval. Using the precise time of pulse occurrence, a neural network can consider more information and offer better computing properties. SNNs compute in the continuous domain. Such neurons test for activation only when their potentials reach a certain value. When a neuron is activated, it produces a signal that is passed to connected neurons, accordingly raising or lowering their potentials. The SNN approach produces a continuous output instead of the binary output of traditional ANNs. Pulse trains are not easily interpretable, hence the need for encoding schemes. However, a pulse train representation may be more suited for processing spatiotemporal data (or real-world sensory data classification). SNNs connect neurons only to nearby neurons so that they process input blocks separately (similar to CNN using filters). They consider time by encoding information as pulse trains so as not to lose information. This avoids the complexity of a recurrent neural network (RNN). Impulse neurons are more powerful computational units than traditional artificial neurons. SNNs are theoretically more powerful than so called "second-generation networks" defined as ANNs "based on computational units that apply activation function with a continuous set of possible output values to a weighted sum (or polynomial) of the inputs"; however, SNN training issues and hardware requirements limit their use. Although unsupervised biologically inspired learning methods are available such as Hebbian learning and STDP, no effective supervised training method is suitable for SNNs that can provide better performance than second-generation networks. Spike-based activation of SNNs is not differentiable, thus gradient descent-based backpropagation (BP) is not available. SNNs have much larger computational costs for simulating realistic neural models than traditional ANNs. Pulse-coupled neural networks (PCNN) are often confused with SNNs. A PCNN can be seen as a kind of SNN. Researchers are actively working on various topics. The first concerns differentiability. The expressions for both the forward- and backward-learning methods contain the derivative of the neural activation function which is not differentiable because a neuron's output is either 1 when it spikes, and 0 otherwise. This all-or-nothing behavior disrupts gradients and makes these neurons unsuitable for gradient-based optimization. Approaches to resolving it include: resorting to entirely biologically inspired local learning rules for the hidden units translating conventionally trained "rate-based" NNs to SNNs smoothing the network model to be continuously differentiable defining an SG (Surrogate Gradient) as a continuous relaxation of the real gradients The second concerns the optimization algorithm. Standard BP can be expensive in terms of computation, memory, and communication and may be poorly suited to the hardware that implements it (e.g., a computer, brain, or neuromorphic device). Incorporating additional neuron dynamics such as Spike Frequency Adaptation (SFA) is a notable advance, enhancing efficiency and computational power. These neurons sit between biological complexity and computational complexity. Originating from biological insights, SFA offers significant computational benefits by reducing power usage, especially in cases of repetitive or intense stimuli. This adaptation improves signal/noise clarity and introduces an elementary short-term memory at the neuron level, which in turn, improves accuracy and efficiency. This was mostly achieved using compartmental neuron models. The simpler versions are of neuron models with adaptive thresholds, are an indirect way of achieving SFA. It equips SNNs with improved learning capabilities, even with constrained synaptic plasticity, and elevates computational efficiency. This feature lessens the demand on network layers by decreasing the need for spike processing, thus lowering computational load and memory access time—essential aspects of neural computation. Moreover, SNNs utilizing neurons capable of SFA achieve levels of accuracy that rival those of conventional ANNs, while also requiring fewer neurons for comparable tasks. This efficiency streamlines the computational workflow and conserves space and energy, while maintaining technical integrity. High-performance deep spiking neural networks can operate with 0.3 spikes per neuron. == Applications == SNNs can in principle be applied to the same applications as traditional ANNs. In addition, SNNs can model the central nervous system of biological organisms, such as an insect seeking food without prior knowledge of the environment. Due to their relative realism, they can be used to study biological neural circuits. Starting with a hypothesis about the topology of a biological neuronal circuit and its functi

  Read more →
• 

  Modes of variation

  In statistics, modes of variation are a continuously indexed set of vectors or functions that are centered at a mean and are used to depict the variation in a population or sample. Typically, variation patterns in the data can be decomposed in descending order of eigenvalues with the directions represented by the corresponding eigenvectors or eigenfunctions. Modes of variation provide a visualization of this decomposition and an efficient description of variation around the mean. Both in principal component analysis (PCA) and in functional principal component analysis (FPCA), modes of variation play an important role in visualizing and describing the variation in the data contributed by each eigencomponent. In real-world applications, the eigencomponents and associated modes of variation aid to interpret complex data, especially in exploratory data analysis (EDA). == Formulation == Modes of variation are a natural extension of PCA and FPCA. === Modes of variation in PCA === If a random vector X = ( X 1 , X 2 , ⋯ , X p ) T {\displaystyle \mathbf {X} =(X_{1},X_{2},\cdots ,X_{p})^{T}} has the mean vector μ p {\displaystyle {\boldsymbol {\mu }}_{p}} , and the covariance matrix Σ p × p {\displaystyle \mathbf {\Sigma } _{p\times p}} with eigenvalues λ 1 ≥ λ 2 ≥ ⋯ ≥ λ p ≥ 0 {\displaystyle \lambda _{1}\geq \lambda _{2}\geq \cdots \geq \lambda _{p}\geq 0} and corresponding orthonormal eigenvectors e 1 , e 2 , ⋯ , e p {\displaystyle \mathbf {e} _{1},\mathbf {e} _{2},\cdots ,\mathbf {e} _{p}} , by eigendecomposition of a real symmetric matrix, the covariance matrix Σ {\displaystyle \mathbf {\Sigma } } can be decomposed as Σ = Q Λ Q T , {\displaystyle \mathbf {\Sigma } =\mathbf {Q} \mathbf {\Lambda } \mathbf {Q} ^{T},} where Q {\displaystyle \mathbf {Q} } is an orthogonal matrix whose columns are the eigenvectors of Σ {\displaystyle \mathbf {\Sigma } } , and Λ {\displaystyle \mathbf {\Lambda } } is a diagonal matrix whose entries are the eigenvalues of Σ {\displaystyle \mathbf {\Sigma } } . By the Karhunen–Loève expansion for random vectors, one can express the centered random vector in the eigenbasis X − μ = ∑ k = 1 p ξ k e k , {\displaystyle \mathbf {X} -{\boldsymbol {\mu }}=\sum _{k=1}^{p}\xi _{k}\mathbf {e} _{k},} where ξ k = e k T ( X − μ ) {\displaystyle \xi _{k}=\mathbf {e} _{k}^{T}(\mathbf {X} -{\boldsymbol {\mu }})} is the principal component associated with the k {\displaystyle k} -th eigenvector e k {\displaystyle \mathbf {e} _{k}} , with the properties E ⁡ ( ξ k ) = 0 , Var ⁡ ( ξ k ) = λ k , {\displaystyle \operatorname {E} (\xi _{k})=0,\operatorname {Var} (\xi _{k})=\lambda _{k},} and E ⁡ ( ξ k ξ l ) = 0 for l ≠ k . {\displaystyle \operatorname {E} (\xi _{k}\xi _{l})=0\ {\text{for}}\ l\neq k.} Then the k {\displaystyle k} -th mode of variation of X {\displaystyle \mathbf {X} } is the set of vectors, indexed by α {\displaystyle \alpha } , m k , α = μ ± α λ k e k , α ∈ [ − A , A ] , {\displaystyle \mathbf {m} _{k,\alpha }={\boldsymbol {\mu }}\pm \alpha {\sqrt {\lambda _{k}}}\mathbf {e} _{k},\alpha \in [-A,A],} where A {\displaystyle A} is typically selected as 2 or 3 {\displaystyle 2\ {\text{or}}\ 3} . === Modes of variation in FPCA === For a square-integrable random function X ( t ) , t ∈ T ⊂ R p {\displaystyle X(t),t\in {\mathcal {T}}\subset R^{p}} , where typically p = 1 {\displaystyle p=1} and T {\displaystyle {\mathcal {T}}} is an interval, denote the mean function by μ ( t ) = E ⁡ ( X ( t ) ) {\displaystyle \mu (t)=\operatorname {E} (X(t))} , and the covariance function by G ( s , t ) = Cov ⁡ ( X ( s ) , X ( t ) ) = ∑ k = 1 ∞ λ k φ k ( s ) φ k ( t ) , {\displaystyle G(s,t)=\operatorname {Cov} (X(s),X(t))=\sum _{k=1}^{\infty }\lambda _{k}\varphi _{k}(s)\varphi _{k}(t),} where λ 1 ≥ λ 2 ≥ ⋯ ≥ 0 {\displaystyle \lambda _{1}\geq \lambda _{2}\geq \cdots \geq 0} are the eigenvalues and { φ 1 , φ 2 , ⋯ } {\displaystyle \{\varphi _{1},\varphi _{2},\cdots \}} are the orthonormal eigenfunctions of the linear Hilbert–Schmidt operator G : L 2 ( T ) → L 2 ( T ) , G ( f ) = ∫ T G ( s , t ) f ( s ) d s . {\displaystyle G:L^{2}({\mathcal {T}})\rightarrow L^{2}({\mathcal {T}}),\,G(f)=\int _{\mathcal {T}}G(s,t)f(s)ds.} By the Karhunen–Loève theorem, one can express the centered function in the eigenbasis, X ( t ) − μ ( t ) = ∑ k = 1 ∞ ξ k φ k ( t ) , {\displaystyle X(t)-\mu (t)=\sum _{k=1}^{\infty }\xi _{k}\varphi _{k}(t),} where ξ k = ∫ T ( X ( t ) − μ ( t ) ) φ k ( t ) d t {\displaystyle \xi _{k}=\int _{\mathcal {T}}(X(t)-\mu (t))\varphi _{k}(t)dt} is the k {\displaystyle k} -th principal component with the properties E ⁡ ( ξ k ) = 0 , Var ⁡ ( ξ k ) = λ k , {\displaystyle \operatorname {E} (\xi _{k})=0,\operatorname {Var} (\xi _{k})=\lambda _{k},} and E ⁡ ( ξ k ξ l ) = 0 for l ≠ k . {\displaystyle \operatorname {E} (\xi _{k}\xi _{l})=0{\text{ for }}l\neq k.} Then the k {\displaystyle k} -th mode of variation of X ( t ) {\displaystyle X(t)} is the set of functions, indexed by α {\displaystyle \alpha } , m k , α ( t ) = μ ( t ) ± α λ k φ k ( t ) , t ∈ T , α ∈ [ − A , A ] {\displaystyle m_{k,\alpha }(t)=\mu (t)\pm \alpha {\sqrt {\lambda _{k}}}\varphi _{k}(t),\ t\in {\mathcal {T}},\ \alpha \in [-A,A]} that are viewed simultaneously over the range of α {\displaystyle \alpha } , usually for A = 2 or 3 {\displaystyle A=2\ {\text{or}}\ 3} . == Estimation == The formulation above is derived from properties of the population. Estimation is needed in real-world applications. The key idea is to estimate mean and covariance. === Modes of variation in PCA === Suppose the data x 1 , x 2 , ⋯ , x n {\displaystyle \mathbf {x} _{1},\mathbf {x} _{2},\cdots ,\mathbf {x} _{n}} represent n {\displaystyle n} independent drawings from some p {\displaystyle p} -dimensional population X {\displaystyle \mathbf {X} } with mean vector μ {\displaystyle {\boldsymbol {\mu }}} and covariance matrix Σ {\displaystyle \mathbf {\Sigma } } . These data yield the sample mean vector x ¯ {\displaystyle {\overline {\mathbf {x} }}} , and the sample covariance matrix S {\displaystyle \mathbf {S} } with eigenvalue-eigenvector pairs ( λ ^ 1 , e ^ 1 ) , ( λ ^ 2 , e ^ 2 ) , ⋯ , ( λ ^ p , e ^ p ) {\displaystyle ({\hat {\lambda }}_{1},{\hat {\mathbf {e} }}_{1}),({\hat {\lambda }}_{2},{\hat {\mathbf {e} }}_{2}),\cdots ,({\hat {\lambda }}_{p},{\hat {\mathbf {e} }}_{p})} . Then the k {\displaystyle k} -th mode of variation of X {\displaystyle \mathbf {X} } can be estimated by m ^ k , α = x ¯ ± α λ ^ k e ^ k , α ∈ [ − A , A ] . {\displaystyle {\hat {\mathbf {m} }}_{k,\alpha }={\overline {\mathbf {x} }}\pm \alpha {\sqrt {{\hat {\lambda }}_{k}}}{\hat {\mathbf {e} }}_{k},\alpha \in [-A,A].} === Modes of variation in FPCA === Consider n {\displaystyle n} realizations X 1 ( t ) , X 2 ( t ) , ⋯ , X n ( t ) {\displaystyle X_{1}(t),X_{2}(t),\cdots ,X_{n}(t)} of a square-integrable random function X ( t ) , t ∈ T {\displaystyle X(t),t\in {\mathcal {T}}} with the mean function μ ( t ) = E ⁡ ( X ( t ) ) {\displaystyle \mu (t)=\operatorname {E} (X(t))} and the covariance function G ( s , t ) = Cov ⁡ ( X ( s ) , X ( t ) ) {\displaystyle G(s,t)=\operatorname {Cov} (X(s),X(t))} . Functional principal component analysis provides methods for the estimation of μ ( t ) {\displaystyle \mu (t)} and G ( s , t ) {\displaystyle G(s,t)} in detail, often involving point wise estimate and interpolation. Substituting estimates for the unknown quantities, the k {\displaystyle k} -th mode of variation of X ( t ) {\displaystyle X(t)} can be estimated by m ^ k , α ( t ) = μ ^ ( t ) ± α λ ^ k φ ^ k ( t ) , t ∈ T , α ∈ [ − A , A ] . {\displaystyle {\hat {m}}_{k,\alpha }(t)={\hat {\mu }}(t)\pm \alpha {\sqrt {{\hat {\lambda }}_{k}}}{\hat {\varphi }}_{k}(t),t\in {\mathcal {T}},\alpha \in [-A,A].} == Applications == Modes of variation are useful to visualize and describe the variation patterns in the data sorted by the eigenvalues. In real-world applications, modes of variation associated with eigencomponents allow to interpret complex data, such as the evolution of function traits and other infinite-dimensional data. To illustrate how modes of variation work in practice, two examples are shown in the graphs to the right, which display the first two modes of variation. The solid curve represents the sample mean function. The dashed, dot-dashed, and dotted curves correspond to modes of variation with α = ± 1 , ± 2 , {\displaystyle \alpha =\pm 1,\pm 2,} and ± 3 {\displaystyle \pm 3} , respectively. The first graph displays the first two modes of variation of female mortality data from 41 countries in 2003. The object of interest is log hazard function between ages 0 and 100 years. The first mode of variation suggests that the variation of female mortality is smaller for ages around 0 or 100, and larger for ages around 25. An appropriate and intuitive interpretation is that mortality around 25 is driven by accidental death, while around 0 or 100, mortality is related to congenital disease or natural death. Compared to female mortality

  Read more →