AI Chatbot Generator

AI Chatbot Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Control-flow integrity

  Control-flow integrity (CFI) is a general term for computer security techniques that prevent a wide variety of malware attacks from redirecting the flow of execution (the control flow) of a program. == Background == A computer program commonly changes its control flow to make decisions and use different parts of the code. Such transfers may be direct, in that the target address is written in the code itself, or indirect, in that the target address itself is a variable in memory or a CPU register. In a typical function call, the program performs a direct call, but returns to the caller function using the stack – an indirect backward-edge transfer. When a function pointer is called, such as from a virtual table, we say there is an indirect forward-edge transfer. Attackers seek to inject code into a program to make use of its privileges or to extract data from its memory space. Before executable code was commonly made read-only, an attacker could arbitrarily change the code as it is run, targeting direct transfers or even do with no transfers at all. After W^X became widespread, an attacker wants to instead redirect execution to a separate, unprotected area containing the code to be run, making use of indirect transfers: one could overwrite the virtual table for a forward-edge attack or change the call stack for a backward-edge attack (return-oriented programming). CFI is designed to protect indirect transfers from going to unintended locations. == Techniques == Associated techniques include code-pointer separation (CPS), code-pointer integrity (CPI), stack canaries, shadow stacks (SS), and vtable pointer verification. These protections can be classified into either coarse-grained or fine-grained based on the number of targets restricted. A coarse-grained forward-edge CFI implementation, could, for example, restrict the set of indirect call targets to any function that may be indirectly called in the program, while a fine-grained one would restrict each indirect call site to functions that have the same type as the function to be called. Similarly, for a backward edge scheme protecting returns, a coarse-grained implementation would only allow the procedure to return to a function of the same type (of which there could be many, especially for common prototypes), while a fine-grained one would enforce precise return matching (so it can return only to the function that called it). == Implementations == Related implementations are available in Clang (LLVM front-end),, GNU Compiler Collection, Microsoft's Control Flow Guard and Return Flow Guard, Google's Indirect Function-Call Checks and Reuse Attack Protector (RAP). === LLVM/Clang === The LLVM compiler's C/C++ front-end Clang provides a number of "CFI" schemes that works on the forward edge by checking for errors in virtual tables and type casts. Not all of the schemes are supported on all platforms and most of them, the exception being two "kcfi" schemes intended for low-level kernel software, depends on link-time optimization (LTO) to know what functions are supposed to be called in normal cases. Also provided is a separate "shadow call stack" (SCS) instrumentation pass that defends on the backward edge by checking for call stack modifications, available only for the aarch64 and RISC-V ISAs. And due to use of a shared processor register SCS is only enforceable on certain ABIs or if in other ways it is ensured that any other software using the register set (thread/processor) does not interfere with this use. Google has shipped Android with the Linux kernel compiled by Clang with link-time optimization (LTO) and CFI enabled since 2018. Even though SCS is available for the Linux kernel as an option, and support is also available for Android's system components it is recommended only to enable it for components for which it can be ensured that no third party code is loaded. === GCC === The GNU Compiler Collection implemented a "shadow call stack" compatible with Clang for aarch64 in v12 released in 2022. This feature is primarily intended for building the Linux kernel as support is missing from GCC user space libraries. === Intel Control-flow Enforcement Technology === Intel Control-flow Enforcement Technology (CET) detects compromises to control flow integrity with a shadow stack (SS) and indirect branch tracking (IBT). The kernel must map a region of memory for the shadow stack not writable to user space programs except by special instructions. The shadow stack stores a copy of the return address of each CALL. On a RET, the processor checks if the return address stored in the normal stack and shadow stack are equal. If the addresses are not equal, the processor generates an INT #21 (Control Flow Protection Fault). Indirect branch tracking detects indirect JMP or CALL instructions to unauthorized targets. It is implemented by adding a new internal state machine in the processor. The behavior of indirect JMP and CALL instructions is changed so that they switch the state machine from IDLE to WAIT_FOR_ENDBRANCH. In the WAIT_FOR_ENDBRANCH state, the next instruction to be executed is required to be the new ENDBRANCH instruction (ENDBR32 in 32-bit mode or ENDBR64 in 64-bit mode), which changes the internal state machine from WAIT_FOR_ENDBRANCH back to IDLE. Thus every authorized target of an indirect JMP or CALL must begin with ENDBRANCH. If the processor is in a WAIT_FOR_ENDBRANCH state (meaning, the previous instruction was an indirect JMP or CALL), and the next instruction is not an ENDBRANCH instruction, the processor generates an INT #21 (Control Flow Protection Fault). On processors not supporting CET indirect branch tracking, ENDBRANCH instructions are interpreted as NOPs and have no effect. === Microsoft Control Flow Guard === Control Flow Guard (CFG) was first released for Windows 8.1 Update 3 (KB3000850) in November 2014. Developers can add CFG to their programs by adding the /guard:cf linker flag before program linking in Visual Studio 2015 or newer. As of Windows 10 Creators Update (Windows 10 version 1703), the Windows kernel is compiled with CFG. The Windows kernel uses Hyper-V to prevent malicious kernel code from overwriting the CFG bitmap. CFG operates by creating a per-process bitmap, where a set bit indicates that the address is a valid destination. Before performing each indirect function call, the application checks if the destination address is in the bitmap. If the destination address is not in the bitmap, the program terminates. This makes it more difficult for an attacker to exploit a use-after-free by replacing an object's contents and then using an indirect function call to execute a payload. ==== Implementation details ==== For all protected indirect function calls, the _guard_check_icall function is called, which performs the following steps: Convert the target address to an offset and bit number in the bitmap. The highest 3 bytes are the byte offset in the bitmap The bit offset is a 5-bit value. The first four bits are the 4th through 8th low-order bits of the address. The 5th bit of the bit offset is set to 0 if the destination address is aligned with 0x10 (last four bits are 0), and 1 if it is not. Examine the target's address value in the bitmap If the target address is in the bitmap, return without an error. If the target address is not in the bitmap, terminate the program. ==== Bypass techniques ==== There are several generic techniques for bypassing CFG: Set the destination to code located in a non-CFG module loaded in the same process. Find an indirect call that was not protected by CFG (either CALL or JMP). Use a function call with a different number of arguments than the call is designed for, causing a stack misalignment, and code execution after the function returns (patched in Windows 10). Use a function call with the same number of arguments, but one of pointers passed is treated as an object and writes to a pointer-based offset, allowing overwriting a return address. Overwrite the function call used by the CFG to validate the address (patched in March 2015) Set the CFG bitmap to all 1's, allowing all indirect function calls Use a controlled-write primitive to overwrite an address on the stack (since the stack is not protected by CFG) === Microsoft eXtended Flow Guard === eXtended Flow Guard (XFG) has not been officially released yet, but is available in the Windows Insider preview and was publicly presented at Bluehat Shanghai in 2019. XFG extends CFG by validating function call signatures to ensure that indirect function calls are only to the subset of functions with the same signature. Function call signature validation is implemented by adding instructions to store the target function's hash in register r10 immediately prior to the indirect call and storing the calculated function hash in the memory immediately preceding the target address's code. When the indirect call is made, the XFG validation function compares the value in r10 to the target

  Read more →
• 

  Semi-Automatic Ground Environment

  The Semi-Automated Ground Environment (SAGE) was a system of large computers and associated networking equipment that coordinated data from many radar sites and processed it to produce a single unified image of the airspace over a wide area. SAGE directed and controlled the NORAD response to a possible Soviet air attack, operating in this role from the late 1950s into the 1980s. The processing power behind SAGE was supplied by the largest discrete component-based computer ever built, the AN/FSQ-7, manufactured by IBM. Each SAGE Direction Center (DC) housed an FSQ-7 which occupied an entire floor, approximately 22,000 square feet (2,000 m2) not including supporting equipment. The FSQ-7 was actually two computers, "A" side and "B" side. Computer processing was switched from "A" side to "B" side on a regular basis, allowing maintenance on the unused side. Information was fed to the DCs from a network of radar stations as well as readiness information from various defense sites. The computers, based on the raw radar data, developed "tracks" for the reported targets, and automatically calculated which defenses were within range. Operators used light guns to select targets on-screen for further information, select one of the available defenses, and issue commands to attack. These commands would then be automatically sent to the defense site via teleprinter. Connecting the various sites was an enormous network of telephones, modems and teleprinters. Later additions to the system allowed SAGE's tracking data to be sent directly to CIM-10 Bomarc missiles and some of the US Air Force's interceptor aircraft in-flight, directly updating their autopilots to maintain an intercept course without operator intervention. Each DC also forwarded data to a Combat Center (CC) for "supervision of the several sectors within the division" ("each combat center [had] the capability to coordinate defense for the whole nation"). SAGE became operational in the late 1950s and early 1960s at an estimated total cost between 8 and 12 billion dollars, four times the cost of the Manhattan Project. Throughout its development, there were continual concerns about its real ability to deal with large attacks, and the Operation Sky Shield tests showed that only about one-fourth of enemy bombers would have been intercepted. Nevertheless, SAGE was the backbone of NORAD's air defense system into the 1980s, by which time the tube-based FSQ-7s were increasingly costly to maintain and completely outdated. Today the same command and control task is carried out by microcomputers, based on the same basic underlying data. == Background == === Earlier systems === Just prior to World War II, Royal Air Force (RAF) tests with the new Chain Home (CH) radars had demonstrated that relaying information to the fighter aircraft directly from the radar sites was not feasible. The radars determined the map coordinates of the enemy, but could generally not see the fighters at the same time. This meant the fighters had to be able to determine where to fly to perform an interception but were often unaware of their own exact location and unable to calculate an interception while also flying their aircraft. The solution was to send all of the radar information to a central control station where operators collated the reports into single tracks, and then reported these tracks to the airbases, or sectors. The sectors used additional systems to track their own aircraft, plotting both on a single large map. Operators viewing the map could then see what direction their fighters would have to fly to approach their targets and relay that simply by telling them to fly along a certain heading or vector. This Dowding system was the first ground-controlled interception (GCI) system of large scale, covering the entirety of the UK. It proved enormously successful during the Battle of Britain, and is credited as being a key part of the RAF's success. The system was slow, often providing information that was up to five minutes out of date. Against propeller driven bombers flying at perhaps 225 miles per hour (362 km/h) this was not a serious concern, but it was clear the system would be of little use against jet-powered bombers flying at perhaps 600 miles per hour (970 km/h). The system was extremely expensive in manpower terms, requiring hundreds of telephone operators, plotters and trackers in addition to the radar operators. This was a serious drain on manpower, making it difficult to expand the network. The idea of using a computer to handle the task of taking reports and developing tracks had been explored beginning late in the war. By 1944, analog computers had been installed at the CH stations to automatically convert radar readings into map locations, eliminating two people. Meanwhile, the Royal Navy began experimenting with the Comprehensive Display System (CDS), another analog computer that took X and Y locations from a map and automatically generated tracks from repeated inputs. Similar systems began development with the Royal Canadian Navy, DATAR, and the US Navy, the Naval Tactical Data System (NTDS). A similar system was also specified for the Nike SAM project, specifically referring to a US version of CDS, coordinating the defense over a battle area so that multiple batteries did not fire on a single target. All of these systems were relatively small in geographic scale, generally tracking within a city-sized area. === Valley Committee === When the Soviet Union tested its first atomic bomb in August 1949, the topic of air defense of the US became important for the first time. A study group, the "Air Defense Systems Engineering Committee", was set up under the direction of Dr. George Valley to consider the problem and is known to history as the "Valley Committee". Their December report noted a key problem in air defense using ground-based radars. A bomber approaching a radar station would detect the signals from the radar long before the reflection off the bomber was strong enough to be detected by the station. The committee suggested that when this occurred, the bomber would descend to low altitude, thereby greatly limiting the radar horizon, allowing the bomber to fly past the station undetected. Although flying at low altitude greatly increased fuel consumption, the team calculated that the bomber would only need to do this for about 10% of its flight, making the fuel penalty acceptable. The only solution to this problem was to build a huge number of stations with overlapping coverage. At that point the problem became one of managing the information. Manual plotting was ruled out as too slow, and a computerized solution was the only possibility. To handle this task, the computer would need to be fed information directly, eliminating any manual translation by phone operators, and it would have to be able to analyze that information and automatically develop tracks. A system tasked with defending cities against the predicted future Soviet bomber fleet would have to be dramatically more powerful than the models used in the NTDS or DATAR. The Committee then had to consider whether or not such a computer was possible. The Valley Committee was introduced to Jerome Wiesner, associate director of the Research Laboratory of Electronics at MIT. Wiesner noted that the Servomechanisms Laboratory had already begun development of a machine that might be fast enough. This was the Whirlwind I, originally developed for the Office of Naval Research as a general purpose flight simulator that could simulate any current or future aircraft by changing its software. Wiesner introduced the Valley Committee to Whirlwind's project lead, Jay Forrester, who convinced him that Whirlwind was sufficiently capable. In September 1950, an early microwave early-warning radar system at Hanscom Field was connected to Whirlwind using a custom interface developed by Forrester's team. An aircraft was flown past the site, and the system digitized the radar information and successfully sent it to Whirlwind. With this demonstration, the technical concept was proven. Forrester was invited to join the committee. === Project Charles === With this successful demonstration, Louis Ridenour, chief scientist of the Air Force, wrote a memo stating "It is now apparent that the experimental work necessary to develop, test, and evaluate the systems proposals made by ADSEC will require a substantial amount of laboratory and field effort." Ridenour approached MIT President James Killian with the aim of beginning a development lab similar to the war-era Radiation Laboratory that made enormous progress in radar technology. Killian was initially uninterested, desiring to return the school to its peacetime civilian charter. Ridenour eventually convinced Killian the idea was sound by describing the way the lab would lead to the development of a local electronics industry based on the needs of the lab and the students who would leave the lab to start their

  Read more →
• 

  Torus interconnect

  A torus interconnect is a switch-less network topology for connecting processing nodes in a parallel computer system. == Introduction == In geometry, a torus is created by revolving a circle about an axis coplanar to the circle. While this is a general definition in geometry, the topological properties of this type of shape describes the network topology in its essence. === Geometry illustration === In the representations below, the first is a one dimension torus, a simple circle. The second is a two dimension torus, in the shape of a 'doughnut'. The animation illustrates how a two dimension torus is generated from a rectangle by connecting its two pairs of opposite edges. At one dimension, a torus topology is equivalent to a ring interconnect network, in the shape of a circle. At two dimensions, it becomes equivalent to a two dimension mesh, but with extra connection at the edge nodes. === Torus network topology === A torus interconnect is a switch-less topology that can be seen as a mesh interconnect with nodes arranged in a rectilinear array of N = 2, 3, or more dimensions, with processors connected to their nearest neighbors, and corresponding processors on opposite edges of the array connected.[1] In this lattice, each node has 2N connections. This topology is named for the lattice formed in this way, which is topologically homogeneous to an N-dimensional torus. == Visualization == The first 3 dimensions of torus network topology are easier to visualize and are described below: 1D Torus: one dimension, n nodes are connected in closed loop with each node connected to its two nearest neighbors. Communication can take place in two directions, +x and −x. A 1D Torus is the same as ring interconnection. 2D Torus: two dimensions with degree of four, the nodes are imagined laid out in a two-dimensional rectangular lattice of n rows and n columns, with each node connected to its four nearest neighbors, and corresponding nodes on opposite edges connected. Communication can take place in four directions, +x, −x, +y, and −y. The total nodes of a 2D Torus is n2. 3D Torus: three dimensions, the nodes are imagined in a three-dimensional lattice in the shape of a rectangular prism, with each node connected with its six neighbors, with corresponding nodes on opposing faces of the array connected. Each edge consists of n nodes. communication can take place in six directions, +x, −x, +y, −y, +z, −z. Each edge of a 3D Torus consist of n nodes. The total nodes of 3D Torus is n3. ND Torus: N dimensions, each node of an N dimension torus has 2N neighbors, Communication can take place in 2N directions. Each edge consists of n nodes. Total nodes of this torus is nN. The main motivation of having higher dimension of torus is to achieve higher bandwidth, lower latency, and higher scalability. Higher-dimensional arrays are difficult to visualize. The above ruleset shows that each higher dimension adds another pair of nearest neighbor connections to each node. == Performance == A number of supercomputers on the TOP500 list use three-dimensional torus networks, e.g. IBM's Blue Gene/L and Blue Gene/P, and the Cray XT3. IBM's Blue Gene/Q uses a five-dimensional torus network. Fujitsu's K computer and the PRIMEHPC FX10 use a proprietary three-dimensional torus 3D mesh interconnect called Tofu. === 3D Torus performance simulation === Sandeep Palur and Dr. Ioan Raicu from Illinois Institute of Technology conducted experiments to simulate 3D torus performance. Their experiments ran on a computer with 250GB RAM, 48 cores and x86_64 architecture. The simulator they used was ROSS (Rensselaer’s Optimistic Simulation System). They mainly focused on three aspects: Varying network size Varying number of servers Varying message size They concluded that throughput decreases with the increase of servers and network size. Otherwise, throughput increases with the increase of message size. === 6D Torus product performance === Fujitsu Limited developed a 6D torus computer model called "Tofu". In their model, a 6D torus can achieve 100 GB/s off-chip bandwidth, 12 times higher scalability than a 3D torus, and high fault tolerance. The model is used in the K computer and Fugaku. === Cost === While long wrap-around links may be the easiest way to visualize the connection topology, in practice, restrictions on cable lengths often make long wrap-around links impractical. Instead, directly connected nodes—including nodes that the above visualization places on opposite edges of a grid, connected by a long wrap-around link—are physically placed nearly adjacent to each other in a folded torus network. Every link in the folded torus network is very short—almost as short as the nearest-neighbor links in a simple grid interconnect—and therefore low-latency.

  Read more →
• 

  Sharenting

  "Sharenting" is a portmanteau of "sharing" and "parenting", describing the practice of parents publicizing a large amount of potentially sensitive content about their children on internet platforms, most notably on social media. While the term was coined as recently as 2010, sharenting has become an international phenomenon with widespread presence in the United States, Spain, France, and the United Kingdom. Proponents of sharenting frame the practice as a natural expression of parental pride in their children and argue that critics take sharenting-related posts out of context. Detractors find that it violates child privacy and hurts a parent–child relationship. Academic research has been conducted over the potential social motivations for sharenting and legal frameworks to balance child privacy with this parental practice. Researchers have conducted several psychological surveys, outlining social media accessibility, parental self-identification with children, and social pressure as potential causes for sharenting. Legal scholars have identified international human rights laws, labor protections, and recent online child privacy statutes as potential legal standards to check sharenting abuses. == History == The origins of the term "sharenting" have been attributed to the Wall Street Journal, where they called it "oversharenting," a portmanteau of "oversharing" and "parenting." Priya Kumar suggests that recording life moments of children rearing is not a new practice: people have been using diaries, scrapbooks and baby log books as the media of documentation for centuries. Scholars assert that sharenting has become popular as a result of social media, which has made many people more comfortable with sharing their lives and those of their children online. The trend of oversharing on social media has raised public attention in the 2010s and become the focus of a number of editorials and academic research projects. It was also added to Times Word of the Day in February 2013 and Collins English Dictionary in 2016 given its influence. == Popularity == Several studies describe sharenting as an international phenomenon with widespread prevalence across households. In the United States, researchers at the University of Michigan C.S. Mott Children's Hospital found that almost 75% of American parents were familiar with someone who over-shared information about their child on social media, and an AVG survey determined that 92% of all American two-year-olds had some presence on the internet. In Australia, Fisher-Price conducted a survey which revealed that 90% of Australian parents admitted to over-sharing. In Spain and Czech Republic, a survey of approximately 1,500 parents found that 70-80% participated in sharenting. In the United Kingdom, France, Germany, and Italy, a Research Now report revealed that almost three-quarters of surveyed parents said that they were "willing to share images of their infants". Some claim that sharenting presents a violation of child privacy, and this backlash includes anti-sharenting sites and apps that block baby pictures. One particular outlet of protest was the blog STFU Parents, founded in 2009 to criticize parental oversharing on social media. Some parents felt that these criticisms of sharenting often took posts out of context and neglected some positive aspects of the practice, including advancing a stronger sense of online community. Others, while acknowledging the potential privacy violations of sharenting, suggested a more tailored approach that would only permit posting under certain conditions, notwithstanding audience and identification restrictions for social media posts. == Motivations == Research has suggested that sharenting is associated with a mix of parent self-identification with children, mothering pressures, and the accessibility of social media. Conducting 17 interviews with mothers in the United Kingdom, a London School of Economics study found that parent bloggers often re-explained their sharing practices in terms of expressing their own personal identity, representing their own child as part of themselves. In particular, the report surveyed the use of blogs as a networking vehicle to connect parents with similar family situations and found that sharenting parents, by filtering self-presentation through their parent-child relationship, adopted a more relational identity on social media websites. This included identifying oneself in terms of parental circumstances, whether it be raising a child with a disability or being a single mother. Alternatively, some have suggested that these online expressions indicate the infiltration of individual pride into the sphere of parenting, as family photography becomes a means to "show off" one's children to the others and strengthens a parent's sense of individuated self. Addressing the prevalence of mothers engaging in sharenting, those who purport this view argue that the rise of digital communication has pressured mothers into performing the role of a "good" parent on social media platforms. They claim that these developments may reinforce a dominant vision of a "normal" family, as sharenting posts could be motivated by the need to converge to a normative interpretation of family. == Controversy == While some people assert that online platforms enable parents to establish a community and seek parenting support, others are concerned about the children's data privacy and their lack of informed consent. Sharing content may not only embarrass children but also creates an initial digital footprint, a history of online activity, that the children themselves have no control over. This might bring some negative consequences, such as being ridiculed at school or leaving a negative impression on future employers. === Parental benefits === Many parents use social media to seek parenting advice and share information about their children. With the convenience of online platforms, parent bloggers can easily connect with other people in similar situations as well as those who are willing to contribute meaningful advice. By forming a community, parents can receive encouragement from empathetic peers and assistance from experts in children rearing. Parents whose children need special educational accommodations or have disabilities often found themselves detached from the mainstream parenting style. Therefore, they regard online blogs as a means to gain support from others and support back. Online blogging enables parents of children with disabilities and special needs to connect with other parents. The advice from similarly situated families can open up new possibilities that help the parents "negotiate the complexities of social services, health care, and schools". However, in some cases, posting online about a parent's struggles can cause a backlash, as advocates may accuse the parent of presenting people with that condition in a bad light, or wonder how the child will feel, if they later read these posts and see how much their parents struggled to care for them. Such advantages of social media are not limited to particular groups of parents. In general, most parents benefit from exchanging parenting experience. Statistically speaking, 72% of parents rate social media useful for emotional connection and affirmations, and 74% of them receive support about parenting from friends on social media. Sharenting also plays a role in fostering interpersonal relationships. As the images and words about children's lives initiate conversations, parents use sharenting to stay connected with distant friends and relatives. In particular, mothers, as a research study reveals, are willing to engage in sharenting since they believe that the positive contents can help avoid digital conflicts and maintain close relations with those in their social circles. Researchers also found that female participants in this study carefully chose photos and phrases to express love and present laudable behaviors of children in their updates, which indicates their intention to convey positive messages. These messages also promote a close social network for a child as the parents invites supportive family members and friends into daily life. === Children's privacy === Given the potential misuse of digital data, people are critical about sharenting, and the majority of parents are cautious about the wrongdoing with online posts. The disclosure of minors' personal information, such as geographic location, name, date of birth, pictures, and the schools they attend, might expose them to illegal practices by recipients with malicious intentions. Sharented information is often abused for "identity theft", when imposters manage to track, stalk, commit fraud against children, or even blackmail the family. According to Barclays, online fraud targeting the young generation will contribute to a loss of £670 million (approximately $790 million) by 2030, and two-thirds of identity fraud will be related to s

  Read more →
• 

  Ideonomy

  Ideonomy is a combinatorial "science of ideas" developed by American independent scholar Patrick M. Gunkel (1947–2017). Specifically, Ideonomy is concerned with the systematic organization of ideas and the discovery of the rules behind how ideas combine, diverge, and transform. Gunkel defined ideonomy as "the science of the laws of ideas and of the application of such laws to the generation of all possible ideas in connection with any subject, idea, or thing." In his 1992 book A History of Knowledge, Charles Van Doren compared ideonomy to a "mining operation" that excavates meanings and thought to discover treasures hidden deep within language. Sources from the 1980s and 1990s demonstrate that ideonomy was useful to academic researchers in fields including biology, toxicology, and nursing/patient care. Beginning in the 2010s, academics in a wide range of fields including machine learning, marketing, computational modeling, and cybersecurity have relied on materials generated for ideonomy to provide methodological support for their research. == Etymology and definition == The word "ideonomy" combines the Greek roots ideo- (from idea, meaning pattern or form) and -nomy (from nomos, meaning law or custom). The suffix -nomy suggests the laws concerning or the totality of knowledge about a given subject, as in astronomy or taxonomy. In a note posted on the MIT ideonomy website, Gunkel states that the word was supposedly first coined by the French Encyclopedists to refer to a science of ideas. No evidence is provided for this statement, however. The concept bears some relationship to Antoine Destutt de Tracy's "ideology" (1796), which originally meant a systematic science of ideas before acquiring its modern political connotations. Gunkel provided several metaphorical descriptions of ideonomy: An "idea bank": a computer network enabling systematic exploration of infinite possible ideas A "kaleidoscope" that can exhibit all possible combinations and transformations of ideas A "prism" capable of diffracting any idea into its cognitive components A "gigantic microscope for magnifying the ideocosm" == History and development == In 1984, Gunkel received a five-year unsolicited grant from the Richard Lounsbery Foundation of New York to develop ideonomy. A June 1, 1987 article on the front page of The Wall Street Journal brought Gunkel and ideonomy to wider public attention. Some academics were interested in using ideonomy's techniques, including biologist Betsey Dyer, who published several contemporaneous peer-reviewed studies citing ideonomy. Academic researchers in the field of toxicology and nursing/patient care also used ideonomy. However, ideonomy's broadest contribution to date came beginning in the 2010s, as a list of personality traits generated for combinatorial matching was used by researchers in artificial intelligence to code human emotions for machine-learning tasks, develop computational models related to personality, develop a measurement framework for influencer-brand recommender systems, and aid information awareness/cybersecurity assessment. == Methodology == The foundational empirical method of ideonomy involves the systematic creation of extensive lists. Gunkel's apartment reportedly contained thousands of lists on every conceivable topic. Gunkel termed each list an "organon," which he described as expanding through "combination, permutation, transformation, generalization, specialization, intersection, interaction, reapplication, recursive use, etc. of existing organons." The ideonomic process follows a progressive structure. The ideonomist begins with a simple list of examples of a particular idea, concept, or thing. The list need not be exhaustive. By studying this list, the ideonomist isolates and identifies types. This categorical analysis then reveals missing items, allowing the primary list to be improved and refined. Gunkel emphasized that list items must not only cover genuine categories of nature but also be formulated in ways that yield the largest possible number of syntactically coherent possibilities when combined. The core technique of ideonomy is "ideocombinatorics"—the systematic intersection and combination of items from different lists to generate novel composite concepts. Gunkel developed computer programs to automate this process. For example, combining a list of 230 Universal Elementary Shapes (pits, pyramids, trenches, hemispheres, needles) with a list of 74 Types of Order (recurrence, identity, likeness of parts) yields 17,020 possible "shapes of order." These combinations, when phrased as questions ("Can there be pits of recurrence?"), could suggest new categories of phenomena worthy of investigation. The computer-generated output is typically repetitive and often meaningless. However, with sufficient frequency, the combinations yield results that are unexpectedly interesting and fruitful. In one documented case, Gunkel's programs generated 45,540 questions about toxins for microbiologist David Bermudes. One question—"Can hierarchies of cell process be used as a basis for classifying toxic action?"—prompted Bermudes to develop a novel approach to classifying biological toxins by the type of molecule they attack, rather than by chemical structure or physiological system affected. According to one contemporaneous account of ideonomy, "Gunkel takes for his field all fields and all ideas about anything. He uses a computer to generate lists of words and phrases and by juxtaposition reviews the resultant patterns for novel ideas. The computer is ideal for this task because the mind would rebel at the formidable processing task ideonomy involves. What we have here is computer generated originality." == Applications == Gunkel and his supporters identified several practical applications for ideonomic methods: Scientific research: Biologist Betsey Dyer of Wheaton College published research crediting ideonomy for helping to generate ideas. Medical science: When Austin pathologist Michael T. O'Brien was presented with the ideonomically-generated question "Can arteries have rashes?", he initially dismissed it as nonsense. Upon reflection, he realized that large arteries are supplied with blood by tiny vessels that might become inflamed and dilated, analogous to skin vessels in a rash—a phenomenon potentially worth researching. Analogical thinking: Harvard law professor Robert Clark used ideonomic analogies to write a research paper comparing plant structure with human hierarchies. Artificial intelligence: Douglas Lenat, a researcher at Microelectronics and Computer Technology Corporation (MCC) in Austin, suggested that Gunkel's lists enumerating types of human mistakes could help design AI systems capable of recognizing and correcting their own errors. == Reception and criticism == Ideonomy received mixed reactions from the academic and scientific communities. Prominent supporters included: Edward Fredkin, former director of MIT's computer science laboratory, who praised Gunkel's "provocative ideas on artificial intelligence." Marvin Minsky, AI scientist and MIT professor, who described ideonomy as "perhaps the most extensive study of ways to generate ideas." Frederick Seitz, president emeritus of Rockefeller University, who noted Gunkel's "encyclopedic scope" Robert C. Clark, Harvard law professor, who called Gunkel "the most intelligent person I ever met" However, skeptics questioned whether ideonomy constituted a genuine science. Fredkin himself noted that Gunkel "pours out about 60 ideas a minute, and 59 of them are bad," though he added that "even with one good idea out of 60, it's still an amazing accomplishment." Douglas Lenat observed that brainstorming with Gunkel was "a bit like being hit over the head by the muse with a sledgehammer" and that "he puts people off." Gunkel himself acknowledged that ideonomy was in its infancy and might seem "absurdly utopian." His planned magnum opus on ideonomy remained incomplete, and was posted on an MIT website thanks to faculty advisor Whitman Richards. Gunkel wrote: "Pioneering in a completely new field, yes in a new science, is almost unreal. It is heartbreaking, it is pitiable, it is almost inhuman. Honestly, it is a hell. There is nothing heroic about it." == Related concepts == Gunkel identified several historical precedents for ideonomic thinking: Gottfried Wilhelm Leibniz (1646–1716): The philosopher's work on a universal characteristic (characteristica universalis) and calculus of reasoning Peter Mark Roget (1779–1869): Creator of Roget's Thesaurus, which organized concepts into a systematic taxonomy Dmitri Mendeleev (1834–1907): Developer of the periodic table, demonstrating how combining lists of element families could reveal previously unseen connections Fritz Zwicky (1898–1974): The Caltech astrophysicist whom Gunkel called the "grandfather of ideonomy" for his development of "morphological research"—systematic exploration of all possible solutions t

  Read more →
• 

  Feistel cipher

  In cryptography, a Feistel cipher (also known as Luby–Rackoff block cipher) is a symmetric structure used in the construction of block ciphers, named after the German-born physicist and cryptographer Horst Feistel, who did pioneering research while working for IBM; it is also commonly known as a Feistel network. A large number of block ciphers use the scheme, including the US Data Encryption Standard, the Soviet/Russian GOST (aka Magma) and the more recent Blowfish and Twofish ciphers. In a Feistel cipher, encryption and decryption are very similar operations, and both consist of iteratively running a function called a "round function" a fixed number of times. == History == Many modern symmetric block ciphers are based on Feistel networks. Feistel networks were first seen commercially in IBM's Lucifer cipher, designed by Horst Feistel and Don Coppersmith in 1973. Feistel networks gained respectability when the U.S. Federal Government adopted the DES (a cipher based on Lucifer, with changes made by the NSA) in 1976. Like other components of the DES, the iterative nature of the Feistel construction makes implementing the cryptosystem in hardware easier (particularly on the hardware available at the time of DES's design). == Design == A Feistel network uses a round function, a function which takes two inputs – a data block and a subkey – and returns one output of the same size as the data block. In each round, the round function is run on half of the data to be encrypted, and its output is XORed with the other half of the data. This is repeated a fixed number of times, and the final output is the encrypted data. An important advantage of Feistel networks compared to other cipher designs such as substitution–permutation networks (SP-networks) is that the entire operation is guaranteed to be invertible (that is, encrypted data can be decrypted), even if the round function is not itself invertible. The round function can be made arbitrarily complicated, since it does not need to be designed to be invertible. Furthermore, the encryption and decryption operations are very similar, even identical in some cases, requiring only a reversal of the key schedule. Therefore, the size of the code or circuitry required to implement such a cipher is nearly halved. Unlike SP-networks, Feistel networks also do not depend on a substitution box that could cause timing side-channels in software implementations. == Theoretical work == The structure and properties of Feistel ciphers have been extensively analyzed by cryptographers. Michael Luby and Charles Rackoff analyzed the Feistel cipher construction and proved that if the round function is a cryptographically secure pseudorandom function, with Ki used as the seed, then 3 rounds are sufficient to make the block cipher a pseudorandom permutation, while 4 rounds are sufficient to make it a "strong" pseudorandom permutation (which means that it remains pseudorandom even to an adversary who gets oracle access to its inverse permutation). Because of this very important result of Luby and Rackoff, Feistel ciphers are sometimes called Luby–Rackoff block ciphers. Further theoretical work has generalized the construction somewhat and given more precise bounds for security. == Construction details == Let F {\displaystyle \mathrm {F} } be the round function and let K 0 , K 1 , … , K n {\displaystyle K_{0},K_{1},\ldots ,K_{n}} be the sub-keys for the rounds 0 , 1 , … , n {\displaystyle 0,1,\ldots ,n} respectively. Then the basic operation is as follows: Split the plaintext block into two equal pieces: ( L 0 {\displaystyle L_{0}} , R 0 {\displaystyle R_{0}} ). For each round i = 0 , 1 , … , n {\displaystyle i=0,1,\dots ,n} , compute L i + 1 = R i , {\displaystyle L_{i+1}=R_{i},} R i + 1 = L i ⊕ F ( R i , K i ) , {\displaystyle R_{i+1}=L_{i}\oplus \mathrm {F} (R_{i},K_{i}),} where ⊕ {\displaystyle \oplus } means XOR. Then the ciphertext is ( R n + 1 , L n + 1 ) {\displaystyle (R_{n+1},L_{n+1})} . Decryption of a ciphertext ( R n + 1 , L n + 1 ) {\displaystyle (R_{n+1},L_{n+1})} is accomplished by computing for i = n , n − 1 , … , 0 {\displaystyle i=n,n-1,\ldots ,0} R i = L i + 1 , {\displaystyle R_{i}=L_{i+1},} L i = R i + 1 ⊕ F ⁡ ( L i + 1 , K i ) . {\displaystyle L_{i}=R_{i+1}\oplus \operatorname {F} (L_{i+1},K_{i}).} Then ( L 0 , R 0 ) {\displaystyle (L_{0},R_{0})} is the plaintext again. The diagram illustrates both encryption and decryption. Note the reversal of the subkey order for decryption; this is the only difference between encryption and decryption. === Unbalanced Feistel cipher === Unbalanced Feistel ciphers use a modified structure where L 0 {\displaystyle L_{0}} and R 0 {\displaystyle R_{0}} are not of equal lengths. The Skipjack cipher is an example of such a cipher. The Texas Instruments digital signature transponder uses a proprietary unbalanced Feistel cipher to perform challenge–response authentication. The Thorp shuffle is an extreme case of an unbalanced Feistel cipher in which one side is a single bit. This has better provable security than a balanced Feistel cipher but requires more rounds. There exists Type-1, Type-2, and Type-3 Feistel networks, where the Feistel function is one fourth the size of the block but operates a varying number of times within one round. === Other uses === The Feistel construction is also used in cryptographic algorithms other than block ciphers. For example, the optimal asymmetric encryption padding (OAEP) scheme uses a simple Feistel network to randomize ciphertexts in certain asymmetric-key encryption schemes. A generalized Feistel algorithm can be used to create strong permutations on small domains of size not a power of two (see format-preserving encryption). === Feistel networks as a design component === Whether the entire cipher is a Feistel cipher or not, Feistel-like networks can be used as a component of a cipher's design. For example, MISTY1 is a Feistel cipher using a three-round Feistel network in its round function, Skipjack is a modified Feistel cipher using a Feistel network in its G permutation, and Threefish (part of Skein) is a non-Feistel block cipher that uses a Feistel-like MIX function. == List of Feistel ciphers == Feistel or modified Feistel: Generalised Feistel: CAST-256 CLEFIA MacGuffin RC2 RC6 Skipjack SMS4

  Read more →
• 

  Copyright

  A copyright is a type of intellectual property that gives its owner the exclusive legal right to copy, distribute, adapt, display, and perform a creative work, usually for a limited time. The creative work may be in a literary, artistic, educational, or musical form. Copyright is intended to protect the original expression of an idea in the form of a creative work, but not the idea itself. A copyright is subject to limitations based on public interest considerations, such as the fair use doctrine in the United States and fair dealing doctrine in the United Kingdom. Some jurisdictions require "fixing" copyrighted works in a tangible form. It is often shared among multiple authors, each of whom holds a set of rights to use or license the work, and who are commonly referred to as rights holders. These rights normally include reproduction, control over derivative works, distribution, public performance, and moral rights such as attribution. Copyrights can be granted by public law and are in that case considered "territorial rights". This means that copyrights granted by the law of a certain state do not extend beyond the territory of that specific jurisdiction. Copyrights of this type vary by country; many countries, and sometimes a large group of countries, have made agreements with other countries on procedures applicable when works "cross" national borders or national rights are inconsistent. Typically, the public law duration of a copyright expires 50 to 100 years after the creator dies, depending on the jurisdiction. Some countries require certain copyright formalities to establishing copyright, others recognize copyright in any completed work, without a formal registration. When the copyright of a work expires, it enters the public domain. == History == === Background === The concept of copyright developed after the printing press came into use in Europe in the 15th and 16th centuries. It was associated with a common law and rooted in the civil law system. The printing press made it much cheaper to produce works, but as there was initially no copyright law, anyone could buy or rent a press and print any text. Popular new works were immediately re-set and re-published by competitors, so printers needed a constant stream of new material. Fees paid to authors for new works were high and significantly supplemented the incomes of many academics. Printing brought profound social changes. The rise in literacy across Europe led to a dramatic increase in the demand for reading matter. Prices of reprints were low, so publications could be bought by poorer people, creating a mass audience. In German-language markets before the advent of copyright, technical materials, like academic papers and handbooks, were inexpensive and widely available; it has been suggested this contributed to Germany's industrial and economic success. === Conception === The concept of copyright first developed in England. In reaction to the printing of "scandalous books and pamphlets", the English Parliament passed the Licensing of the Press Act 1662, which required all intended publications to be registered with the government-approved Stationers' Company, giving the Stationers the right to regulate what material could be printed. The Statute of Anne, enacted in 1710 in England and Scotland, provided the first legislation to protect copyrights (but not authors' rights). The Copyright Act 1814 extended more rights for authors but did not protect British publications from being reprinted in the US. The Berne International Copyright Convention of 1886 finally provided protection for authors among the countries who signed the agreement, although the US did not join the Berne Convention until 1989. In the US, the Constitution grants Congress the right to establish copyright and patent laws. Shortly after the Constitution was passed, Congress enacted the Copyright Act of 1790, modeling it after the Statute of Anne. While the national law protected authors' published works, authority was granted to the states to protect authors' unpublished works. The most recent major overhaul of copyright in the US, the Copyright Act of 1976, extended federal copyright to works as soon as they are created and "fixed", without requiring publication or registration. State law continues to apply to unpublished works that are not otherwise copyrighted by federal law. This act also changed the calculation of copyright term from a fixed term (then a maximum of fifty-six years) to "life of the author plus 50 years". These changes brought the US closer to conformity with the Berne Convention, and in 1989 the United States further revised its copyright law and joined the Berne Convention officially. Copyright laws allow products of creative human activities, such as literary and artistic production, to be preferentially exploited and thus incentivized. Different cultural attitudes, social organizations, economic models and legal frameworks are seen to account for why copyright emerged in Europe and not, for example, in Asia. In the Middle Ages in Europe, there was generally a lack of any concept of literary property due to the general relations of production, the specific organization of literary production and the role of culture in society. The latter refers to the tendency of oral societies, such as that of Europe in the medieval period, to view knowledge as the product and expression of the collective, rather than to see it as individual property. However, with copyright laws, intellectual production comes to be seen as a product of an individual, with attendant rights. The most significant point is that patent and copyright laws support the expansion of the range of creative human activities that can be commodified. This parallels the ways in which capitalism led to the commodification of many aspects of social life that earlier had no monetary or economic value perse. Copyright has developed into a concept that has a significant effect on nearly every modern industry, including not just literary work, but also forms of creative work such as sound recordings, films, photographs, software, and architecture. === National copyrights === Often seen as the first real copyright law, the 1709 British Statute of Anne gave authors and the publishers to whom they did chose to license their works, the right to publish the author's creations for a fixed period, after which the copyright expired. It was "An Act for the Encouragement of Learning, by Vesting the Copies of Printed Books in the Authors or the Purchasers of such Copies, during the Times therein mentioned." The act also alluded to individual rights of the artist. It began: "Whereas Printers, Booksellers, and other Persons, have of late frequently taken the Liberty of Printing ... Books, and other Writings, without the Consent of the Authors ... to their very great Detriment, and too often to the Ruin of them and their Families:". A right to benefit financially from the work is articulated, and court rulings and legislation have recognized a right to control the work, such as ensuring that the integrity of it is preserved. An irrevocable right to be recognized as the work's creator appears in some countries' copyright laws. The Copyright Clause of the United States, Constitution (1787) authorized copyright legislation: "To promote the Progress of Science and useful Arts, by securing for limited Times to Authors and Inventors the exclusive Right to their respective Writings and Discoveries." That is, by guaranteeing them a period of time in which they alone could profit from their works, they would be enabled and encouraged to invest the time required to create them, and this would be good for society as a whole. A right to profit from the work has been the philosophical underpinning for much legislation extending the duration of copyright, to the life of the creator and beyond, to their heirs. Yet scholars like Lawrence Lessig have argued that copyright terms have been extended beyond the scope imagined by the Framers. Lessig refers to the Copyright Clause as the "Progress Clause" to emphasize the social dimension of intellectual property rights. The original length of copyright in the United States was 14 years, and it had to be explicitly applied for. If the author wished, they could apply for a second 14‑year monopoly grant, but after that the work entered the public domain, so it could be used and built upon by others. === Continental law === In many jurisdictions of the European continent, comparable legal concepts to copyright did exist from the 16th century on but did change under Napoleonic rule into another legal concept: authors' rights or creator's right laws, from French: droits d'auteur and German Urheberrecht. In many modern-day publications the terms copyright and authors' rights are being mixed, or used as translations, but in a juridical sense the legal concepts do essentially differ. Authors' rights are, generally speaking,

  Read more →
• 

  Social media and psychology

  Social media began in the form of generalized online communities. These online communities formed on websites like Geocities.com in 1994, Theglobe.com in 1995, and Tripod.com in 1995. Many of these early communities focused on social interaction by bringing people together through the use of chat rooms. The chat rooms encouraged users to share personal information, ideas, or even personal web pages. Later the social networking community Classmates took a different approach by simply having people link to each other by using their personal email addresses. By the late 1990s, social networking websites began to develop more advanced features to help users find and manage friends. These newer generation of social networking websites began to flourish with the emergence of SixDegrees.com in 1997, Makeoutclub in 2000, Hub Culture in 2002, and Friendster in 2002. However, the first profitable mass social networking website was the South Korean service, Cyworld. Cyworld initially launched as a blog-based website in 1999 and social networking features were added to the website in 2001. Other social networking websites emerged like Myspace in 2002, LinkedIn in 2003, and Bebo in 2005. In 2009, the social networking website Facebook (launched in 2004) became the largest social networking website in the world. Both Instagram and Kik were launched in October 2010. Active users of Facebook increased from just a million in 2004 to over 750 million by the year 2011. Making internet-based social networking both a cultural and financial phenomenon. In September 2011, Snapchat was launched and reported over 300 million users in 2021. == Psychology of social networking == A social network is a social structure made up of individuals or organizations who communicate and interact with each other. Social networking sites – such as Facebook, Twitter, Instagram, Pinterest and LinkedIn – are defined as technology-enabled tools that assist users with creating and maintaining their relationships. A study found that middle schoolers reported using social media to see what their friends are doing, to post pictures, and to connect with friends. Human behavior related to social networking is influenced by major individual differences, meaning that people differ quite systematically in the quantity and quality of their social relationships. Two of the main personality traits that are responsible for this variability are the traits of extraversion and introversion. Extraversion refers to the tendency to be socially dominant, exert leadership, and influence on others. In contrast, introversion reflects a tendency towards shyness, social phobia, or even avoid social situations altogether, which could potentially reduce the number of social contacts a person may have. These individual differences may result in different social networking outcomes. Other psychology factors related to social media and Media psychology are depression, anxiety, attachment, self-identity, well-being, and the need to belong. === Neuroscience === The three domains that neural systems rely on to be strengthened to support social media use are social cognition, self-referential cognition, and social rewarding. When someone posts something on social media, they think of how their audience will react, while the audience thinks of the motivations behind posting the information. Both parties are analyzing the other's thoughts and feelings, which coherently rely on multiple network systems of the brain including the dorsomedial prefrontal cortex, bilateral temporoparietal junction, anterior temporal lobes, inferior frontal gyri, and posterior cingulate cortex. All of these systems work to help us process social behaviors and thoughts drawn out on social media. Social media requires a great deal of self-referential thought. People use social media as a platform to express their opinions and show off their past and present selves. In other words, as Bailey Parnell said in her Ted Talk, we're showing off our "highlight reel" (4). When one receives feedback from others, the individual obtains more reflected self-appraisal which leads to comparisons of their social behaviors or "highlights" to other users. Self-referential thought involves activity in the medial prefrontal cortex and the posterior cingulate cortex. The brain uses these systems when thinking of oneself. A 2021 umbrella review found that most associations between adolescent social media use and mental health were characterized as weak or inconsistent, though certain studies identified 'substantial' negative impacts, particularly linked to passive consumption and problematic use. Social media also provides a constant supply of rewards that keeps users coming back for more. Whenever users receive a like or a new follower, it activates the brain's social reward system which includes the ventromedial prefrontal cortex, ventral striatum, and ventral tegmental area. This system has been found to activate in response to positive feedback from peers, suggesting that users experience online acceptance in a similar manner to other material rewards or positive experiences, further acting as a potential reward. While these areas of the brain become strengthened, other parts of the brain start to weaken. Technology is encouraging multi-tasking, especially because of how easy it is to switch from one task to another by opening another tab or using two devices at once. The brain's hippocampus is mainly associated with long-term memory. In a study done by Russell Poldark, a professor at UCLA, they found that "for the task learned without distraction, the hippocampus was involved. However, for the task learned with the distraction of the beeps, the hippocampus was not involved; but the striatum was, which is the brain system that underlies our ability to learn new skills." The study concludes that multitasking can cause reliance on the striatum more than the hippocampus, which can change the way we learn. The striatum is known to be connected to mainly the brain's reward system. The brain will strengthen the neurons to the striatum while it weakens the neurons to the hippocampus to make the brain more efficient. Because our brain starts to rely on the striatum more than the hippocampus, it becomes harder for us to process new information. Nicholas Carr, author of The Shallows: How The Internet Is Changing Our Brains, agrees: "What psychologists and brain scientists tell us about interruptions is that they have a fairly profound effect on the way we think. It becomes much harder to sustain attention, to think about one thing for a long period of time, and to think deeply when new stimuli are pouring at you all day long. I argue that the price we pay for being constantly inundated with information is a loss of our ability to be contemplative and to engage in the kind of deep thinking that requires you to concentrate on one thing." === Well-Being === How does well-being relate to social media? In an article titled Social Impact of Psychological Research on Well-Being Shared in Social Media, Pulido et al. found a 15.7% social impact in their results. These new results were compared to a previous study conducted by Pulido et al., which had a high of 4.98% compared to 27.5% in the new study. These results show the ESISM, which is evidence of social impact present. In a two-year span, the difference between social impact rose 22.52% according to these studies. When taking into consideration that an increasingly large number of teens report either being active on, or having used, some form of social media, ranging from apps such as Facebook to TikTok, researching the effects of social media on the well-being of teens and young adults has become more of a topic of focus in recent years. === Depression === Especially in today's society, social media has gained a new perspective on younger generations. It is what younger generations are born into and are growing up to use, particularly what is running today's society. Social Media has its downfalls regarding depression and mental health. Many users often compare their lives regarding what they see on these platforms. In an article Does Social Media Cause Depression? by the Child Mind Institute, Miller states that "several studies, teenage and young adult users who spend the most time on Instagram, Facebook and other platforms for have shown to have substantially (from 13 to 66 percent) higher rates of reported depression than those who spent the least time", what the study shows how Facebook and Instagram, platforms showcasing daily lives and or lifestyles, or less fulfilling or less satisfied or more flaunting base or superficial. Instead of social community, there has become a perception of individuals striving for a life that is not real, whether that is editing photos or making life seem perfect when it is not. This causes a sense of depression by the weight of a comparing game. In "How Social Media Affects Y

  Read more →
• 

  Comparison of color models in computer graphics

  This article provides introductory information about the RGB, HSV, and HSL color models from a computer graphics (web pages, images) perspective. An introduction to colors is also provided to support the main discussion. == Basics of color == === Primary colors and hue === First, "color" refers to the human brain's subjective interpretation of combinations of a narrow band of wavelengths of light. For this reason, the definition of "color" is not based on a strict set of physical phenomena. Therefore, even basic concepts like "primary colors" are not clearly defined. For example, traditional "Painter's Colors" use red, blue, and yellow as the primary colors, "Printer's Colors" use cyan, yellow, and magenta, and "Light Colors" use red, green, and blue. "Light colors", more formally known as additive colors, are formed by combining red, green, and blue light. This article refers to additive colors and refers to red, green, and blue as the primary colors. Hue is a term describing a pure color, that is, a color not modified by tinting or shading (see below). In additive colors, hues are formed by combining two primary colors. When two primary colors are combined in equal intensities, the result is a "secondary color". === Color wheel === A color wheel is a tool that provides a visual representation of the relationships between all possible hues. The primary colors are arranged around a circle at equal (120 degree) intervals. (Warning: Color wheels frequently depict "Painter's Colors" primary colors, which leads to a different set of hues than additive colors.) The illustration shows a simple color wheel based on the additive colors. Note that the position (top, right) of the starting color, typically red, is arbitrary, as is the order of green and blue (clockwise, counter-clockwise). The illustration also shows the secondary colors, yellow, cyan, and magenta, located halfway between (60 degrees) the primary colors. == Complementary color == The complement of a hue is the hue that is opposite it (180 degrees) on the color wheel. Using additive colors, mixing a hue and its complement in equal amounts produces white. === Tints and shades === The following discussion uses an illustration involving three projectors pointing to the same spot on a screen. Each projector is capable of generating one hue. The "intensities" of each projector are "matched" and can be equally adjusted from zero to full. (Note: "Intensity" is used here in the same sense as the RGB color model. The subject of matching, or "gamma correction", is beyond the level of this article.) A shade is produced by "dimming" a maximum chroma color. Painters refer to this as "adding black". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Dimming" is accomplished by decreasing each projector's intensity setting to the same fraction of its start setting. In the shade example, with any fully shaded hue, that all three projectors are set to zero intensity, resulting in black. A tint is produced by "lightening" a maximum chroma color. Painters refer to this as "adding white". In our illustration, one projector is set to full intensity, a second is set to some intensity between zero and full, and third is set to zero. "Lightening" is accomplished by increasing each projector's intensity setting by the same fraction from its start setting to full. In the tinting example, note that the third projector is now contributing. When the hue is fully lightened, all three projectors are each at full intensity, and the result is white. Note an attribute of the total intensity in the additive model. If full intensity for one projector is 1, then a primary color has a combined intensity of 1. A secondary color has a total intensity of 2. White has a total intensity of 3. Tinting, or "adding white", increases the total intensity of the hue. While this is simply a fact, the HSL model will take this fact into account in its design. === Tones === Tone is a general term, typically used by painters, to refer to the effects of reducing the "colorfulness" of a maximum chroma color; painters refer to it as "adding gray". Note that gray is not a color or even a single concept but refers to all the range of values between black and white where all three primary colors are equally represented. The general term is provided as more specific terms have conflicting definitions in different color models. Thus, shading takes a hue toward black, tinting takes a hue towards white, and tones cover the range between. == Choosing a color model == No one color model is necessarily "better" than another. Typically, the choice of a color model is dictated by external factors, such as a graphics tool or the need to specify colors according to the CSS2 or CSS3 standard. The following discussion only describes how the models function, centered on the concepts of hue, shade, tint, and tone. === RGB === The RGB model's approach to colors is important because: It directly reflects the physical properties of "Truecolor" displays As of 2011, most graphic cards define pixel values in terms of the colors red, green, and blue. The typical range of intensity values for each color, 0–255, is based on taking a binary number with 32 bits and breaking it up into four bytes of 8 bits each. 8 bits can hold a value from 0 to 255. The fourth byte is used to specify the "alpha", or the opacity, of the color. Opacity comes into play when layers with different colors are stacked. If the color in the top layer is less than fully opaque (alpha < 255), the color from underlying layers "shows through". In the RGB model, hues are represented by specifying one color as full intensity (255), a second color with a variable intensity, and the third color with no intensity (0). The following provides some examples using red as the full-intensity and green as the partial-intensity colors; blue is always zero: Shades are created by multiplying the intensity of each primary color by 1 minus the shade factor, in the range 0 to 1. A shade factor of 0 does nothing to the hue, a shade factor of 1 produces black: new intensity = current intensity (1 – shade factor) The following provides examples using orange: Tints are created by modifying each primary color as follows: the intensity is increased so that the difference between the intensity and full intensity (255) is decreased by the tint factor, in the range 0 to 1. A tint factor of 0 does nothing, a tint factor of 1 produces white: new intensity = current intensity + (255 – current intensity) tint factor The following provides examples using orange: Tones are created by applying both a shade and a tint. The order in which the two operations are performed does not matter, with the following restriction: when a tint operation is performed on a shade, the intensity of the dominant color becomes the "full intensity"; that is, the intensity value of the dominant color must be used in place of 255. The following provides examples using orange: === HSV === The HSV, or HSB, model describes colors in terms of hue, saturation, and value (brightness). Note that the range of values for each attribute is arbitrarily defined by various tools or standards. Be sure to determine the value ranges before attempting to interpret a value. Hue corresponds directly to the concept of hue in the Color Basics section. The advantages of using hue are The angular relationship between tones around the color circle is easily identified Shades, tints, and tones can be generated easily without affecting the hue Saturation corresponds directly to the concept of tint in the Color Basics section, except that full saturation produces no tint, while zero saturation produces white, a shade of gray, or black. Value corresponds directly to the concept of intensity in the Color Basics section. Pure colors are produced by specifying a hue with full saturation and value Shades are produced by specifying a hue with full saturation and less than full value Tints are produced by specifying a hue with less than full saturation and full value Tones are produced by specifying a hue and both less than full saturation and value White is produced by specifying zero saturation and full value, regardless of hue Black is produced by specifying zero value, regardless of hue or saturation Shades of gray are produced by specifying zero saturation and between zero and full value The advantage of HSV is that each of its attributes corresponds directly to the basic color concepts, which makes it conceptually simple. The perceived disadvantage of HSV is that the saturation attribute corresponds to tinting, so desaturated colors have increasing total intensity. For this reason, the CSS3 standard plans to support RGB and HSL but not HSV. === HSL === The HSL model describes colors in terms of hue, saturation, and lightness (also called luminance). (Note: the definition of sa

  Read more →
• 

  Application delivery network

  An application delivery network (ADN) is a suite of technologies that, when deployed together, provide availability, security, visibility, and acceleration for Internet applications such as websites. ADN components provide supporting functionality that enables website content to be delivered to visitors and other users of that website, in a fast, secure, and reliable way. Gartner defines application delivery networking as the combination of WAN optimization controllers (WOCs) and application delivery controllers (ADCs). At the data center end of an ADN is the ADC, an advanced traffic management device that is often also referred to as a web switch, content switch, or multilayer switch, the purpose of which is to distribute traffic among a number of servers or geographically dislocated sites based on application specific criteria. In the branch office portion of an ADN is the WAN optimization controller, which works to reduce the number of bits that flow over the network using caching and compression, and shapes TCP traffic using prioritization and other optimization techniques. Some WOC components are installed on PCs or mobile clients, and there is typically a portion of the WOC installed in the data center. Application delivery networks are also offered by some CDN vendors. The ADC, one component of an ADN, evolved from layer 4-7 switches in the late 1990s when it became apparent that traditional load balancing techniques were not robust enough to handle the increasingly complex mix of application traffic being delivered over a wider variety of network connectivity options. == Application delivery techniques == The Internet was designed according to the end-to-end principle. This principle keeps the core network relatively simple and moves the intelligence as much as possible to the network end-points: the hosts and clients. An Application Delivery Network (ADN) enhances the delivery of applications across the Internet by employing a number of optimization techniques. Many of these techniques are based on established best-practices employed to efficiently route traffic at the network layer including redundancy and load balancing In theory, an Application Delivery Network (ADN) is closely related to a content delivery network. The difference between the two delivery networks lies in the intelligence of the ADN to understand and optimize applications, usually referred to as application fluency. Application Fluent Network (AFN) is based on the concept of Application Fluency to refer to WAN optimization techniques applied at Layer Four to Layer Seven of the OSI model for networks. Application Fluency implies that the network is fluent or intelligent in understanding and being able to optimize delivery of each application. Application Fluent Network is an addition of SDN capabilities. The acronym 'AFN' is used by Alcatel-Lucent Enterprise to refer to an Application Fluent Network. Application delivery uses one or more layer 4–7 switches, also known as a web switch, content switch, or multilayer switch to intelligently distribute traffic to a pool, also known as a cluster or farm, of servers. The application delivery controller (ADC) is assigned a single virtual IP address (VIP) that represents the pool of servers. Traffic arriving at the ADC is then directed to one of the servers in the pool (cluster, farm) based on a number of factors including application specific data values, application transport protocol, availability of servers, current performance metrics, and client-specific parameters. An ADN provides the advantages of load distribution, increase in capacity of servers, improved scalability, security, and increased reliability through application specific health checks. Increasingly the ADN comprises a redundant pair of ADC on which is integrated a number of different feature sets designed to provide security, availability, reliability, and acceleration functions. In some cases these devices are still separate entities, deployed together as a network of devices through which application traffic is delivered, each providing specific functionality that enhances the delivery of the application. == ADN optimization techniques == === TCP multiplexing === TCP Multiplexing is loosely based on established connection pooling techniques utilized by application server platforms to optimize the execution of database queries from within applications. An ADC establishes a number of connections to the servers in its pool and keeps the connections open. When a request is received by the ADC from the client, the request is evaluated and then directed to a server over an existing connection. This has the effect of reducing the overhead imposed by establishing and tearing down the TCP connection with the server, improving the responsiveness of the application. Some ADN implementations take this technique one step further and also multiplex HTTP and application requests. This has the benefit of executing requests in parallel, which enhances the performance of the application. === TCP optimization === There are a number of Request for Comments (RFCs) which describe mechanisms for improving the performance of TCP. Many ADN implement these RFCs in order to provide enhanced delivery of applications through more efficient use of TCP. The RFCs most commonly implemented are: Delayed Acknowledgements Nagle Algorithm Selective Acknowledgements Explicit Congestion Notification ECN Limited and Fast Retransmits Adaptive Initial Congestion Windows === Data compression and caching === ADNs also provide optimization of application data through caching and compression techniques. There are two types of compression used by ADNs today: industry standard HTTP compression and proprietary data reduction algorithms. It is important to note that the cost in CPU cycles to compress data when traversing a LAN can result in a negative performance impact and therefore best practices are to only utilize compression when delivering applications via a WAN or particularly congested high-speed data link. HTTP compression is asymmetric and transparent to the client. Support for HTTP compression is built into web servers and web browsers. All commercial ADN products currently support HTTP compression. A second compression technique is achieved through data reduction algorithms. Because these algorithms are proprietary and modify the application traffic, they are symmetric and require a device to reassemble the application traffic before the client can receive it. A separate class of devices known as WAN Optimization Controllers (WOC) provide this functionality, but the technology has been slowly added to the ADN portfolio over the past few years as this class of device continues to become more application aware, providing additional features for specific applications such as CIFS and SMB. == ADN reliability and availability techniques == === Advanced health checking === Advanced health checking is the ability of an ADN to determine not only the state of the server on which an application is hosted, but the status of the application it is delivering. Advanced health checking techniques allow the ADC to intelligently determine whether or not the content being returned by the server is correct and should be delivered to the client. This feature enables other reliability features in the ADN, such as resending a request to a different server if the content returned by the original server is found to be erroneous. === Load balancing algorithms === The load balancing algorithms found in today's ADN are far more advanced than the simplistic round-robin and least connections algorithms used in the early 1990s. These algorithms were originally loosely based on operating systems' scheduling algorithms, but have since evolved to factor in conditions peculiar to networking and application environments. It is more accurate to describe today's "load balancing" algorithms as application routing algorithms, as most ADN employ application awareness to determine whether an application is available to respond to a request. This includes the ability of the ADN to determine not only whether the application is available, but whether or not the application can respond to the request within specified parameters, often referred to as a service level agreement. Typical industry standard load balancing algorithms available today include: Round Robin Least Connections Fastest Response Time Weighted Round Robin Weighted Least Connections Custom values assigned to individual servers in a pool based on SNMP or other communication mechanism === Fault tolerance === The ADN provides fault tolerance at the server level, within pools or farms. This is accomplished by designating specific servers as a 'backup' that is activated automatically by the ADN in the event that the primary server(s) in the pool fail. The ADN also ensures application availability and reliability through its ability to seamlessly "failover"

  Read more →
• 

  Key (cryptography)

  A key in cryptography is a piece of information, usually a string of numbers or letters that are stored in a file, which, when processed through a cryptographic algorithm, can encode or decode cryptographic data. Based on the used method, the key can be different sizes and varieties, but in all cases, the strength of the encryption relies on the security of the key being maintained. A key's security strength is dependent on its algorithm, the size of the key, the generation of the key, and the process of key exchange. == Scope == The key is what is used to encrypt data from plaintext to ciphertext. There are different methods for utilizing keys and encryption. === Symmetric cryptography === Symmetric cryptography refers to the practice of the same key being used for both encryption and decryption. === Asymmetric cryptography === Asymmetric cryptography has separate keys for encrypting and decrypting. These keys are known as the public and private keys, respectively. == Purpose == Since the key protects the confidentiality and integrity of the system, it is important to be kept secret from unauthorized parties. With public key cryptography, only the private key must be kept secret, but with symmetric cryptography, it is important to maintain the confidentiality of the key. Kerckhoff's principle states that the entire security of the cryptographic system relies on the secrecy of the key. == Key sizes == Key size is the number of bits in the key defined by the algorithm. This size defines the upper bound of the cryptographic algorithm's security. The larger the key size, the longer it will take before the key is compromised by a brute force attack. Since perfect secrecy is not feasible for key algorithms, researches are now more focused on computational security. In the past, keys were required to be a minimum of 40 bits in length, however, as technology advanced, these keys were being broken quicker and quicker. As a response, restrictions on symmetric keys were enhanced to be greater in size. Currently, 2048 bit RSA is commonly used, which is sufficient for current systems. However, current RSA key sizes would all be cracked quickly with a powerful quantum computer. "The keys used in public key cryptography have some mathematical structure. For example, public keys used in the RSA system are the product of two prime numbers. Thus public key systems require longer key lengths than symmetric systems for an equivalent level of security. 3072 bits is the suggested key length for systems based on factoring and integer discrete logarithms which aim to have security equivalent to a 128 bit symmetric cipher." == Key generation == To prevent a key from being guessed, keys need to be generated randomly and contain sufficient entropy. The problem of how to safely generate random keys is difficult and has been addressed in many ways by various cryptographic systems. A key can directly be generated by using the output of a Random Bit Generator (RBG), a system that generates a sequence of unpredictable and unbiased bits. A RBG can be used to directly produce either a symmetric key or the random output for an asymmetric key pair generation. Alternatively, a key can also be indirectly created during a key-agreement transaction, from another key or from a password. Some operating systems include tools for "collecting" entropy from the timing of unpredictable operations such as disk drive head movements. For the production of small amounts of keying material, ordinary dice provide a good source of high-quality randomness. == Establishment scheme == The security of a key is dependent on how a key is exchanged between parties. Establishing a secured communication channel is necessary so that outsiders cannot obtain the key. A key establishment scheme (or key exchange) is used to transfer an encryption key among entities. Key agreement and key transport are the two types of a key exchange scheme that are used to be remotely exchanged between entities . In a key agreement scheme, a secret key, which is used between the sender and the receiver to encrypt and decrypt information, is set up to be sent indirectly. All parties exchange information (the shared secret) that permits each party to derive the secret key material. In a key transport scheme, encrypted keying material that is chosen by the sender is transported to the receiver. Either symmetric key or asymmetric key techniques can be used in both schemes. The Diffie–Hellman key exchange and Rivest-Shamir-Adleman (RSA) are the most two widely used key exchange algorithms. In 1976, Whitfield Diffie and Martin Hellman constructed the Diffie–Hellman algorithm, which was the first public key algorithm. The Diffie–Hellman key exchange protocol allows key exchange over an insecure channel by electronically generating a shared key between two parties. On the other hand, RSA is a form of the asymmetric key system which consists of three steps: key generation, encryption, and decryption. Key confirmation delivers an assurance between the key confirmation recipient and provider that the shared keying materials are correct and established. The National Institute of Standards and Technology recommends key confirmation to be integrated into a key establishment scheme to validate its implementations. == Management == Key management concerns the generation, establishment, storage, usage and replacement of cryptographic keys. A key management system (KMS) typically includes three steps of establishing, storing and using keys. The base of security for the generation, storage, distribution, use and destruction of keys depends on successful key management protocols. == Key vs password == A password is a memorized series of characters including letters, digits, and other special symbols that are used to verify identity. It is often produced by a human user or a password management software to protect personal and sensitive information or generate cryptographic keys. Passwords are often created to be memorized by users and may contain non-random information such as dictionary words. On the other hand, a key can help strengthen password protection by implementing a cryptographic algorithm which is difficult to guess or replace the password altogether. A key is generated based on random or pseudo-random data and can often be unreadable to humans. A password is less safe than a cryptographic key due to its low entropy, randomness, and human-readable properties. However, the password may be the only secret data that is accessible to the cryptographic algorithm for information security in some applications such as securing information in storage devices. Thus, a deterministic algorithm called a key derivation function (KDF) uses a password to generate the secure cryptographic keying material to compensate for the password's weakness. Various methods such as adding a salt or key stretching may be used in the generation.

  Read more →
• 

  Transmission security

  Transmission security (TRANSEC) is the component of communications security (COMSEC) that results from the application of measures designed to protect transmissions from interception and exploitation by means other than cryptanalysis. Goals of transmission security include: Low probability of interception (LPI) Low probability of detection (LPD) Antijam — resistance to jamming (EPM or ECCM) This involves securing communication links from being compromised by techniques like jamming, eavesdropping, and signal interception. TRANSEC includes the use of frequency hopping, spread spectrum and the physical protection of communication links to obscure the patterns of transmission. It is particularly vital in military and government communication systems, where the security of transmitted data is critical to prevent adversaries from gathering intelligence or disrupting operations. TRANSEC is often implemented alongside COMSEC (Communications Security) to form a comprehensive approach to communication security. Methods used to achieve transmission security include frequency hopping and spread spectrum where the required pseudorandom sequence generation is controlled by a cryptographic algorithm and key. Such keys are known as transmission security keys (TSK). Modern U.S. and NATO TRANSEC-equipped radios include SINCGARS and HAVE QUICK.

  Read more →
• 

  Virtual Woman

  Virtual Woman is a software program that has elements of a chatbot, virtual reality, artificial intelligence, a video game, and a virtual human. It claims to be the oldest form of virtual life in existence, as it has been distributed since the late 1980s. Recent releases of the program can update their intelligence by connecting online and downloading newer personalities and histories. == Program play == When Virtual Woman starts, the user is presented with a list of options and then may choose their Virtual Woman's ethnic type, personality, location, clothing, etc. or load a pre-built Virtual Woman from a Digital DNA file. Once the options are determined, the user is presented with a 3-D animated Virtual Woman of their selection and then can engage them in conversation, progressing in a manner similar to that of its predecessor, ELIZA and its successors, the chatbots. In most versions of Virtual Woman, this is done through the keyboard, but some versions also support voice input. == In popular culture == Software sales and usage statistics from private companies are difficult to verify. WinSite, an independent Internet shareware distribution site that does publish public download counts, has for some time now listed some version of Virtual Woman in their top three shareware downloads of all time with well over seven hundred thousand downloads. == Compadre == The group of beta testers and advisers for Virtual Woman are referred to as Compadre and have their own beta testing site and forum. == Criticisms == As Virtual Woman has developed the ability to conduct longer and more realistic interactions, particularly in recent beta releases, criticism has arisen that this may lead some users to social isolation, or to use the program as a substitute for real human interaction. However, these are criticisms that have been leveled at all video games and at the use of the Internet itself. == Release history == Versions of Virtual Woman with rough release dates and PC platforms for which they were designed: Virtual Woman (????) (DOS) Virtual Woman for Windows (1991) (Windows 3.0) Virtual Woman 95 (1995) (Windows 3X, Windows 95) Virtual Woman 98 (1998) (Windows 3X, Windows 95) Virtual Woman 2000 (2000) (Windows 95+) Virtual Woman Millennium (Windows 95, XP) Virtual Woman Net ( Windows XP/Vista specific)

  Read more →
• 

  Cryptographic High Value Product

  Cryptographic High Value Product (CHVP) is a designation used within the information security community to identify assets that have high value, and which may be used to encrypt / decrypt secure communications, but which do not retain or store any classified information. When disconnected from the secure communication network, the CHVP equipment may be handled with a lower level of controls than required for COMSEC equipment.

  Read more →
• 

  Ciphertext

  In cryptography, ciphertext or cyphertext is the result of encryption performed on plaintext using an algorithm, called a cipher. Ciphertext is also known as encrypted or encoded information because it contains a form of the original plaintext that is unreadable by a human or computer without the proper cipher to decrypt it. This process prevents the loss of sensitive information via hacking. Decryption, the inverse of encryption, is the process of turning ciphertext into readable plaintext. Ciphertext is not to be confused with codetext, because the latter is a result of a code, not a cipher. == Conceptual underpinnings == Let m {\displaystyle m\!} be the plaintext message that Alice wants to secretly transmit to Bob and let E k {\displaystyle E_{k}\!} be the encryption cipher, where k {\displaystyle _{k}\!} is a cryptographic key. Alice must first transform the plaintext into ciphertext, c {\displaystyle c\!} , in order to securely send the message to Bob, as follows: c = E k ( m ) . {\displaystyle c=E_{k}(m).\!} In a symmetric-key system, Bob knows Alice's encryption key. Once the message is encrypted, Alice can safely transmit it to Bob (assuming no one else knows the key). In order to read Alice's message, Bob must decrypt the ciphertext using E k − 1 {\displaystyle {E_{k}}^{-1}\!} which is known as the decryption cipher, D k : {\displaystyle D_{k}:\!} D k ( c ) = D k ( E k ( m ) ) = m . {\displaystyle D_{k}(c)=D_{k}(E_{k}(m))=m.\!} Alternatively, in a non-symmetric key system, everyone, not just Alice and Bob, knows the encryption key; but the decryption key cannot be inferred from the encryption key. Only Bob knows the decryption key D k , {\displaystyle D_{k},} and decryption proceeds as D k ( c ) = m . {\displaystyle D_{k}(c)=m.} == Types of ciphers == The history of cryptography began thousands of years ago. Cryptography uses a variety of different types of encryption. Earlier algorithms were performed by hand and are substantially different from modern algorithms, which are generally executed by a machine. === Historical ciphers === Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include: Substitution cipher: the units of plaintext are replaced with ciphertext (e.g., Caesar cipher and one-time pad) Polyalphabetic substitution cipher: a substitution cipher using multiple substitution alphabets (e.g., Vigenère cipher and Enigma machine) Polygraphic substitution cipher: the unit of substitution is a sequence of two or more letters rather than just one (e.g., Playfair cipher) Transposition cipher: the ciphertext is a permutation of the plaintext (e.g., rail fence cipher) Historical ciphers are not generally used as a standalone encryption technique because they are quite easy to crack. Many of the classical ciphers, with the exception of the one-time pad, can be cracked using brute force. === Modern ciphers === Modern ciphers are more secure than classical ciphers and are designed to withstand a wide range of attacks. An attacker should not be able to find the key used in a modern cipher, even if they know any specifics about the plaintext and its corresponding ciphertext. Modern encryption methods can be divided into the following categories: Private-key cryptography (symmetric key algorithm): one shared key is used for encryption and decryption Public-key cryptography (asymmetric key algorithm): two different keys are used for encryption and decryption In a symmetric key algorithm (e.g., DES, AES), the sender and receiver have a shared key established in advance: the sender uses the shared key to perform encryption; the receiver uses the shared key to perform decryption. Symmetric key algorithms can either be block ciphers or stream ciphers. Block ciphers operate on fixed-length groups of bits, called blocks, with an unvarying transformation. Stream ciphers encrypt plaintext digits one at a time on a continuous stream of data, with the transformation of successive digits varying during the encryption process. In an asymmetric key algorithm (e.g., RSA), there are two different keys: a public key and a private key. The public key is published, thereby allowing any sender to perform encryption. The private key is kept secret by the receiver, thereby allowing only the receiver to correctly perform decryption. == Cryptanalysis == Cryptanalysis (also referred to as codebreaking or cracking the code) is the study of applying various methodologies to obtain the meaning of encrypted information, without having access to the cipher required to correctly decrypt the information. This typically involves gaining an understanding of the system design and determining the cipher. Cryptanalysts can follow one or more attack models to crack a cipher, depending upon what information is available and the type of cipher being analyzed. Ciphertext is generally the most easily obtained part of a cryptosystem and therefore is an important part of cryptanalysis. === Attack models === Ciphertext-only: the cryptanalyst has access only to a collection of ciphertexts or code texts. This is the weakest attack model because the cryptanalyst has limited information. Modern ciphers rarely fail under this attack. Known-plaintext: the attacker has a set of ciphertexts to which they know the corresponding plaintext Chosen-plaintext attack: the attacker can obtain the ciphertexts corresponding to an arbitrary set of plaintexts of their own choosing Batch chosen-plaintext attack: where the cryptanalyst chooses all plaintexts before any of them are encrypted. This is often the meaning of an unqualified use of "chosen-plaintext attack". Adaptive chosen-plaintext attack: where the cryptanalyst makes a series of interactive queries, choosing subsequent plaintexts based on the information from the previous encryptions. Chosen-ciphertext attack: the attacker can obtain the plaintexts corresponding to an arbitrary set of ciphertexts of their own choosing Adaptive chosen-ciphertext attack Indifferent chosen-ciphertext attack Related-key attack: similar to a chosen-plaintext attack, except the attacker can obtain ciphertexts encrypted under two different keys. The keys are unknown, but the relationship between them is known (e.g., two keys that differ in the one bit). == Famous ciphertexts == The Babington Plot ciphers The Shugborough inscription The Zimmermann Telegram The Magic Words are Squeamish Ossifrage The cryptogram in "The Gold-Bug" Beale ciphers Kryptos Zodiac Killer ciphers

  Read more →