AI Chatbot Example

AI Chatbot Example — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Lose It!

Lose It! is an American health and wellness mobile app developed by FitNow, Inc. The app generates calorie budgets for users by tracking weight, exercise, food and calorie intake, and personal goals, primarily to assist them in achieving weight loss. == History == Lose It! was developed in Boston and debuted in 2008. The app and its associated company were founded by J.J. Allaire, Charles Teague and Paul Dicristina. Prior to founding Lose It!, Teague and Allaire had founded the online research tool Onfolio, which was acquired by Microsoft in 2006. The Lose It! app was originally released as an iOS app before being released as a website in 2010 and an Android app in 2011. In 2015, Lose It! announced plans to release the app internationally. Lose It! was also available as an app for Apple Watch at its launch in 2015. The app’s “Snap It” feature, which allows users to approximate calorie counts by taking pictures of their daily meals and snacks, was released in beta in 2016. Snap It was named an Innovation Awards Honoree at the 2017 Consumer Electronics Show in Las Vegas. In 2020, Patrick Wetherille, one of the company’s earliest employees, was appointed chief executive officer. == App == Lose It! is weight loss app. The app allows users to set goals such as increasing strength, overall health/maintenance, and weight loss. It provides users recommended calorie budgets based on data such as their current weight and their desired weight. Lose It! also tracks data such as exercise/activity level and food consumption and allows users to track calories consumed by scanning barcodes for food products then retrieving calorie information for products. The app can also estimate the amount of calories in a food products. Lose It! has integration features connecting it to other apps such as Fitbit and Runkeeper. It also has social features such as joining groups and sharing progress with friends. The Premium version of the app allows users to track foods according to specific diets like keto, heart healthy or Mediterranean.
Read more →
Browser sniffing

Browser sniffing (also known as User agent sniffing and browser detection) is a set of techniques used in websites and web applications in order to determine the web browser a visitor is using, and to serve browser-appropriate content to the visitor. It is also used to detect mobile browsers and send them mobile-optimized websites. This practice is sometimes used to circumvent incompatibilities between browsers due to misinterpretation of HTML, Cascading Style Sheets (CSS), or the Document Object Model (DOM). While the World Wide Web Consortium maintains up-to-date central versions of some of the most important Web standards in the form of recommendations, in practice no software developer has designed a browser which adheres exactly to these standards; implementation of other standards and protocols, such as SVG and XMLHttpRequest, varies as well. As a result, different browsers display the same page differently, and so browser sniffing was developed to detect the web browser in order to help ensure consistent display of content. == Sniffer methods == === Client-side sniffing === Web pages can use programming languages such as JavaScript which are interpreted by the user agent, with results sent to the web server. For example: This code is run by the client computer, and the results are used by other code to make necessary adjustments on client-side. In this example, the client computer is asked to determine whether the browser can use a feature called ActiveX. Since this feature was proprietary to Microsoft, a positive result will indicate that the client may be running Microsoft's Internet Explorer. This is no longer a reliable indicator since Microsoft's open-source release of the ActiveX code, however, meaning that it can be used by any browser. === Standard Browser detection method === The web server communicates with the client using a communication protocol known as HTTP, or Hypertext Transfer Protocol, which specifies that the client send the server information about the browser being used to view the website in a User-Agent header. === Server-side sniffing === Extensive browser techniques enable persistent user tracking even if users try to stay anonymous. See device fingerprint for more details on browser fingerprinting. == Issues and standards == Many websites use browser sniffing to determine whether a visitor's browser is unable to use certain features (such as JavaScript, DHTML, ActiveX, or cascading style sheets), and display an error page if a certain browser is not used. However, it is virtually impossible to account for the tremendous variety of browsers available to users. Generally, a web designer using browser sniffing to determine what kind of page to present will test for the three or four most popular browsers, and provide content tailored to each of these. If a user is employing a user agent not tested for, there is no guarantee that a usable page will be served; thus, the user may be forced either to change browsers or to avoid the page. The World Wide Web Consortium, which sets standards for the construction of web pages, recommends that web sites be designed in accordance with its standards, and be arranged to "fail gracefully" when presented to a browser which cannot deal with a particular standard. Browser sniffing increases maintenance needed. Websites treating some browsers differently should provide an alternative version for other browsers. Use of user agent strings are error-prone because the developer must check for the appropriate part, such as "Gecko" instead of "Firefox". They must also ensure that future versions are supported. Furthermore, some browsers allow changing the user agent string, making the technique useless.
Read more →
FactorDaily

FactorDaily is an Indian digital media publication founded in 2016 by Pankaj Mishra and Jayadevan PK. Mishra was formerly an Editor at TechCrunch and the Economic Times. The digital publication was launched with an intent to produce stories on the impact of technology on life in India. == History == FactorDaily began publishing in May 2016, with daily reported stories on technology, culture and life in India. Prior to its launch, the company had raised $1 million in seed funding from Accel India, Blume Ventures, Girish Mathrubootham of Freshdesk, Vijay Shekhar Sharma of PayTm, and Jay Vijayan of Tekion. Josey Puliyenthuruthel John, formerly Managing Editor at Business Today and National Corporate Editor at Mint, later joined the company as a Consulting Editor. In January 2017, FactorDaily launched its first Podcast called The Outliers. The inaugural episode featured a conversation with Manish Sharma of Printo on his journey starting up. == Awards == The FactorDaily team won the Bengaluru Editors Lab 2017, a journalism hackathon organised by the Global Editors Network (GEN). The story titled "India has 3,800 psychiatrists for 1.2bn people. Can tech step in to manage mental health?" won the first prize in the online category of the fifth Schizophrenia Research Foundation’s (SCARF) ‘Media for Mental Health’ awards. The story titled 'The dark hand of tech that stokes sex trafficking in India', won the Stop Slavery media Awards by the Thomson Reuters Foundation for the year 2020.
Read more →
Vacuum tube characteristics

Vacuum tube characteristics (also called tube curves, valve characteristics or valve curves) describes the electrical relationships between electrode voltages and currents in a vacuum tube. These relationships are commonly presented as characteristic curves in tube manuals and engineering references. The curves typically show plate current versus plate voltage for several fixed control-grid voltages, showing how current varies with electrode potentials under controlled conditions. Designers use them to select operating points, determine voltage gain, estimate output power, and construct graphical load-line analyses. The use of characteristic curves as an engineering tool for analyzing vacuum-tube operation was established in the 1910s, notably in work by Edwin Howard Armstrong. Examples of such curves appear in early tube manuals and textbooks and form the basis of classical vacuum-tube circuit design. Different types of vacuum tubes are characterized using plots appropriate to their electrode structure and intended use. Two-electrode devices such as diodes are described primarily by the relation between plate voltage and plate current. Amplifying tubes containing control grids, such as triodes, tetrodes, pentodes, and beam tetrodes, are represented by families of curves measured for different grid voltages. From these families additional parameters such as amplification factor (μ), transconductance (gm), and plate resistance (rp) may be obtained. Although these plots are used primarily for circuit design, their shapes arise from the underlying physics of electron flow in vacuum tubes. The physical principles responsible for the observed characteristics are discussed in later sections. == 3/2 power law == In high-vacuum thermionic diodes operating under normal conditions, plate current increases nonlinearly with plate voltage. Over the space-charge-limited region, the current is well approximated by the three-halves power relation I p = P ⋅ V p 3 / 2 {\displaystyle I_{p}=P\cdot V_{p}^{3/2}} where P {\displaystyle P} is the perveance of the tube. Perveance is determined primarily by electrode geometry, including cathode area and cathode-to-plate spacing. It provides a practical measure of current-producing capability and is often used in tube manuals in place of a complete family of plate-characteristic curves. == Signal diode characterization == For small-signal diodes, tube manuals typically publish a single static anode characteristic showing anode current (Ia) as a function of anode voltage (Va), measured with the heater operating at its rated voltage. Because the diode contains no control grid, only one such I–V curve is required. The low-voltage portion of the curve is particularly important in detector service, where the nonlinear curvature of the current–voltage relation allows a small alternating signal to produce a net direct-current output, resulting in rectification. In addition to the static characteristic, tube manuals specify heater ratings, maximum plate voltage, permissible average current, and interelectrode capacitance. These parameters define the allowable operating region and high-frequency behavior. Another typical data sheet for a diode is for the Philips EB91 double diode. This book includes curves of the diode response in use as a detector. The output voltage is non-zero for an input voltage of 0 due to the Edison effect. == Rectifier characterization == Vacuum-tube rectifiers intended for power-supply service are specified differently from signal diodes. Their data emphasize heater requirements, peak inverse voltage, maximum peak plate current, permissible DC output current for various filter configurations, and regulation characteristics. Rectifier tubes exhibit nonlinear voltage drop that increases with current. For limited operating ranges this behavior may be represented by an equivalent or effective series resistance corresponding to the local slope of the plate characteristic (dynamic plate resistance, dV/dI). Diode voltages can be determied by use of a graphical aide. In capacitor-input supplies, conduction occurs in pulses near the peaks of the AC waveform, producing peak currents substantially greater than the average DC load current. Data sheets therefore specify maximum peak plate current and permissible filter capacitance in addition to average DC ratings. Under varying load conditions, the supply voltage changes in accordance with the rectifier's nonlinear characteristic and effective impedance. == Triode characterization == === Early use === The systematic use of characteristic curves to explain and quantify vacuum-tube amplification was introduced by Edwin Howard Armstrong in 1914. Using measured plate voltage-current curves, Armstrong demonstrated the mechanism of triode amplification and clarified the operation of grid-leak detection. ==== Plate and transfer characteristics ==== Triode data sheets present families of plate characteristics showing plate current I p {\displaystyle I_{p}} as a function of plate voltage E p {\displaystyle E_{p}} for several fixed grid voltages E g {\displaystyle E_{g}} . From these curves the operating point, voltage gain, and load-line behavior may be determined graphically. In normal operation, plate current depends on both grid and plate voltage. Classical analysis shows that the characteristics for different grid voltages are similar in form and differ primarily by horizontal displacement. In triodes, plate current may be approximated by I p = k ( E g + E p μ ) 3 / 2 {\displaystyle I_{p}=k\left(E_{g}+{\frac {E_{p}}{\mu }}\right)^{3/2}} where E g {\displaystyle E_{g}} is the grid voltage, E p {\displaystyle E_{p}} the plate voltage, μ {\displaystyle \mu } the amplification factor, and k {\displaystyle k} a constant determined by the tube geometry.. The amplification factor μ represents the relative effectiveness of grid voltage compared with plate voltage in controlling current. It is fundamentally determined by structural dimensions, particularly grid-to-cathode spacing relative to plate-to-cathode spacing. ==== Small-signal parameters ==== Triodes are commonly characterized by three interrelated small-signal parameters: Amplification factor ( μ {\displaystyle \mu } ) — the change in plate voltage divided by the change in grid voltage at constant plate current: μ = ( ∂ E p ∂ E g ) I p {\displaystyle \mu =\left({\frac {\partial E_{p}}{\partial E_{g}}}\right)_{I_{p}}} Transconductance ( g m {\displaystyle g_{m}} ) — the change in plate current divided by the change in grid voltage at constant plate voltage: g m = ( ∂ I p ∂ E g ) E p {\displaystyle g_{m}=\left({\frac {\partial I_{p}}{\partial E_{g}}}\right)_{E_{p}}} Plate resistance ( r p {\displaystyle r_{p}} ) — the change in plate voltage divided by the change in plate current at constant grid voltage: r p = ( ∂ E p ∂ I p ) E g {\displaystyle r_{p}=\left({\frac {\partial E_{p}}{\partial I_{p}}}\right)_{E_{g}}} These parameters are related by μ = g m r p {\displaystyle \mu =g_{m}r_{p}} as shown in classical tube theory treatments. These parameters are obtained either from slopes of the characteristic curves or from tabulated operating-point data. ==== Comparison of ECC81, ECC82, and ECC83 ==== The ECC81, ECC82, and ECC83 (also known respectively as 12AT7, 12AU7, and 12AX7) are closely related dual triodes widely used in small-signal amplifier stages. Although similar in construction and envelope size, they differ significantly in electrical parameters due to differences in electrode spacing and grid structure. (Data representative of manufacturer specifications.) The ECC83 exhibits high μ {\displaystyle \mu } and high plate resistance, producing large voltage gain but relatively low current drive capability. The ECC82 has lower μ {\displaystyle \mu } and lower plate resistance, allowing greater current delivery and reduced voltage gain. The ECC81 occupies an intermediate position with comparatively high transconductance and moderate amplification factor. These differences arise primarily from variations in grid pitch, cathode area, and electrode spacing, which determine perveance and amplification factor. Although the external envelope is similar, the internal geometry governs the characteristic curves and small-signal parameters. == Tetrode (screen-grid) characterization == The screen-grid tube (tetrode) was developed primarily to reduce the electrostatic coupling between plate and control grid that limited gain and stability in radio-frequency triode amplifiers. In triodes, the grid–plate capacitance provides feedback from plate to grid, restricting obtainable gain and often requiring neutralization circuits such as those used in neutrodyne receivers. By inserting a positively biased screen grid between control grid and plate, this capacitive coupling is greatly reduced, permitting higher stable gain at radio frequencies. The screen grid, also known as the shield grid or grid 2 (to distinguish it from t
Read more →
1DayLater

1DayLater was a free, web-based software that was focused on professional invoicing. The company was formed in 2009 and closed in October 2013. The main function of 1DayLater was to help users create invoices for clients. It could also be used to track time and other expenses, work to budgets, and to track projects. Multiple users could simultaneously work on the same projects together. PC Magazine (PCMag) voted 1DayLater as one of the 'Best Free Software of 2010'. == History == The software was developed by two brothers, Paul and David King; after they experienced similar frustrations while working freelance, the brothers wanted to create a product that would let them track time, expenses and business miles in a single online location. == Media coverage == 1DayLater had the following press coverage: BBC Webscape (July 2010) - Kate Russell gives her latest selection of the best sites on the World Wide Web PCMag (March 2010) - The best free software of 2010 Lifehacker (February 2010) - "A worthy addition to our 'Top Ten Tips and Tools for Freelancers'" Gigaom (February 2010) - Taking a closer look with 1DayLater The Journal (May 2009) - "Top Ten Brands of the North East" (UK) Techcrunch (January 2009) - "A 'feisty time tracking solution from the North East of England'"
Read more →
LTE (telecommunication)

In telecommunications, Long Term Evolution (LTE) is a standard for wireless broadband communication for cellular mobile devices and data terminals. It is considered to be a "transitional" 4G technology, and is therefore also referred to as 3.95G as a step above 3G. LTE is based on the 2G GSM/EDGE and 3G UMTS/HSPA standards. It improves on those standards' capacity and speed by using a different radio interface and core network improvements. LTE is the upgrade path for carriers with both GSM/UMTS networks and CDMA2000 networks. LTE has been succeeded by LTE Advanced, which is officially defined as a "true" 4G technology and also named "LTE+". == Terminology == The standard is developed by the 3GPP (3rd Generation Partnership Project) and is specified in its Release 8 document series, with minor enhancements described in Release 9. LTE is also called 3.95G and has been marketed as 4G LTE and Advanced 4G; but the original version did not meet the technical criteria of a 4G wireless service, as specified in the 3GPP Release 8 and 9 document series for LTE Advanced. The requirements were set forth by the ITU-R organisation in the IMT Advanced specification; but, because of market pressure and the significant advances that WiMAX, Evolved High Speed Packet Access, and LTE bring to the original 3G technologies, ITU-R later decided that LTE and the aforementioned technologies can be called 4G technologies. The LTE Advanced standard formally satisfies the ITU-R requirements for being considered IMT-Advanced. To differentiate LTE Advanced and WiMAX-Advanced from current 4G technologies, ITU has defined the latter as "True 4G". == Overview == LTE stands for Long Term Evolution and is a registered trademark owned by ETSI (European Telecommunications Standards Institute) for the wireless data communications technology and development of the GSM/UMTS standards. However, other nations and companies do play an active role in the LTE project. The goal of LTE was to increase the capacity and speed of wireless data networks using new DSP (digital signal processing) techniques and modulations that were developed around the turn of the millennium. A further goal was the redesign and simplification of the network architecture to an IP-based system with significantly reduced transfer latency compared with the 3G architecture. The LTE wireless interface is incompatible with 2G and 3G networks, so it must be operated on a separate radio spectrum. The idea of LTE was first proposed in 1998, with the use of the COFDM radio access technique to replace the CDMA and studying its Terrestrial use in the L band at 1428 MHz (TE) In 2004 by Japan's NTT Docomo, with studies on the standard officially commenced in 2005. In May 2007, the LTE/SAE Trial Initiative (LSTI) alliance was founded as a global collaboration between vendors and operators with the goal of verifying and promoting the new standard to ensure the global introduction of the technology as quickly as possible. The LTE standard was finalized in December 2008, and the first publicly available LTE service was launched by TeliaSonera in Oslo and Stockholm on December 14, 2009, as a data connection with a USB modem. The LTE services were launched by major North American carriers as well, with the Samsung SCH-r900 being the world's first LTE Mobile phone starting on September 21, 2010, and Samsung Galaxy Indulge being the world's first LTE smartphone starting on February 10, 2011, both offered by MetroPCS, and the HTC ThunderBolt offered by Verizon starting on March 17 being the second LTE smartphone to be sold commercially. In Canada, Rogers Wireless was the first to launch LTE network on July 7, 2011, offering the Sierra Wireless AirCard 313U USB mobile broadband modem, known as the "LTE Rocket stick" then followed closely by mobile devices from both HTC and Samsung. Initially, CDMA operators planned to upgrade to rival standards called UMB and WiMAX, but major CDMA operators (such as Verizon, Sprint and MetroPCS in the United States, Bell and Telus in Canada, au by KDDI in Japan, SK Telecom in South Korea and China Telecom/China Unicom in China) have announced instead they intend to migrate to LTE. The next version of LTE is LTE Advanced, which was standardized in March 2011. Services commenced in 2013. Additional evolution known as LTE Advanced Pro was approved in 2015. The LTE specification provides downlink peak rates of 300 Mbit/s, uplink peak rates of 75 Mbit/s, and QoS provisions permitting a transfer latency of less than 5 ms in the radio access network. LTE has the ability to manage fast-moving mobiles and supports multicast and broadcast streams. LTE supports scalable carrier bandwidths, from 1.4 MHz to 20 MHz and supports both frequency division duplexing (FDD) and time-division duplexing (TDD). The IP-based network architecture, called the Evolved Packet Core (EPC) designed to replace the GPRS Core Network, supports seamless handovers for both voice and data to cell towers with older network technology such as GSM, UMTS and CDMA2000. The simpler architecture results in lower operating costs (for example, each E-UTRA cell will support up to four times the data and voice capacity supported by HSPA). Because LTE frequencies and bands differ from country to country, only multi-band phones can use LTE in all countries where it is supported. == History == === 3GPP standard development timeline === In 2004, NTT Docomo of Japan proposes LTE as the international standard. In September 2006, Siemens Networks (today Nokia Networks) showed in collaboration with Nomor Research the first live emulation of an LTE network to the media and investors. As live applications, two users streaming an HDTV video in the downlink and playing an interactive game in the uplink have been demonstrated. In February 2007, Ericsson demonstrated for the first time in the world, LTE with bit rates up to 144 Mbit/s In September 2007, NTT Docomo demonstrated LTE data rates of 200 Mbit/s with power level below 100 mW during the test. In November 2007, Infineon presented the world's first RF transceiver named SMARTi LTE, supporting LTE functionality in a single-chip RF silicon processed in CMOS In early 2008, LTE test equipment began shipping from several vendors and at the Mobile World Congress 2008 in Barcelona, Ericsson demonstrated the world's first end-to-end mobile call enabled by LTE on a small handheld device. Motorola demonstrated an LTE RAN (Radio Access Network) standard compliant eNodeB and LTE chipset at the same event. At the February 2008 Mobile World Congress: Motorola demonstrated how LTE can accelerate the delivery of personal media experience with HD video demo streaming, HD video blogging, online gaming, and VoIP over LTE running a RAN standard-compliant LTE network & LTE chipset. Ericsson EMP (later ST-Ericsson) demonstrated the world's first end-to-end LTE call on handheld Ericsson demonstrated LTE FDD and TDD mode on the same base station platform. Freescale Semiconductor demonstrated streaming HD video with peak data rates of 96 Mbit/s downlink and 86 Mbit/s uplink. NXP Semiconductors (later part of ST-Ericsson) demonstrated a multi-mode LTE modem as the basis for a software-defined radio system for use in cellphones. picoChip and Mimoon demonstrated a base station reference design. This runs on a common hardware platform (multi-mode / software-defined radio) with their WiMAX architecture. In April 2008, Motorola demonstrated the first EV-DO to LTE hand-off handling over streaming a video from LTE to a commercial EV-DO network and back to LTE. In April 2008, LG Electronics and Nortel demonstrated LTE data rates of 50 Mbit/s while travelling at 110 km/h (68 mph). In November 2008, Motorola demonstrated industry first over-the-air LTE session in 700 MHz spectrum. Researchers at Nokia Siemens Networks and Heinrich Hertz Institut have demonstrated LTE with 100 Mbit/s Uplink transfer speeds. At the February 2009 Mobile World Congress: Infineon demonstrated a single-chip 65 nm CMOS RF transceiver providing 2G/3G/LTE functionality Launch of ng Connect program, a multi-industry consortium founded by Alcatel-Lucent to identify and develop wireless broadband applications. Motorola provided LTE drive tour on the streets of Barcelona to demonstrate LTE system performance in a real-life metropolitan RF environment In July 2009, Nujira demonstrated efficiencies of more than 60% for an 880 MHz LTE Power Amplifier In August 2009, Nortel and LG Electronics demonstrated the first successful handoff between CDMA and LTE networks in a standards-compliant manner In August 2009, Alcatel-Lucent receives FCC certification for LTE base stations for the 700 MHz spectrum band. In September 2009, Nokia Siemens Networks demonstrated the world's first LTE call on standards-compliant commercial software. In October 2009, Ericsson and Samsung demonstrated interoperability between the first ever commercial LTE device and the live network in
Read more →
Content reference identifier

A content reference identifier or CRID is a concept from the standardization work done by the TV-Anytime forum. It is or closely matches the concept of the Uniform Resource Locator, or URL, as used on the World-Wide Web: A unit of content, in a broadcast stream, can be referred to by its globally unique CRID in the same way that a webpage can be referred to by its globally unique URL on the web. The concept of CRID permits referencing contents unambiguously, regardless of their location, i.e., without knowing specific broadcast information (time, date and channel) or how to obtain them through a network, for instance, by means of a streaming service or by downloading a file from an Internet server. The receiver must be capable of resolving these unambiguous references, i.e. of translating them into specific data that will allow it to obtain the location of that content in order to acquire it. This makes it possible for recording processes to take place without knowing that information, and even without knowing beforehand the duration of the content to be recorded: a complete series by a simple click, a program that has not been scheduled yet, a set of programs grouped by a specific criterion... This framework allows for the separation between the reference to a given content (the CRID) and the necessary information to acquire it, which is called a “locator”. Each CRID may lead to one or more locators which will represent different copies of the same content. They may be identical copies broadcast in different channels or dates, or cost different prices. They may also be distinct copies with different technical parameters such as format or quality. It may also be the case that the resolution process of a CRID provides another CRID as a result (for example, its reference in a different network, where it has an alternative identifier assigned by a different operator) or a set of CRIDs (for instance, if the original CRID represents a TV series, in which case the resolution process would result in the list of CRIDs representing each episode). From the above it can be concluded that provided that a given content can belong to many groups (each possibly defined by distinctive qualities), it is possible that many CRIDs carry the same content. That is, several CRIDs may be resolved into the same locator. A CRID is not exactly a universal, unique and exclusive identifier for a given content. It is closely related to the authority that creates it, to the resolution service provider, and to the content provider in such a way that the same content may have different CRIDs depending on the field in which they are used (for example, a different one for each television operator that has the rights to broadcast the content). == Format == A CRID is specified much like URLs. In fact, a CRID is a so-called URI. Typically, the content creator, the broadcaster or a third party will use their DNS-names in a combination with a product-specific name to create globally unique CRIDs. That is, the syntax of a CRID is: crid://authority/data The authority field represents the entity that created the CRID and its format is that of a DNS name. The data field represents a string of characters that will unambiguously identify the content within the authority scope (it is a string of characters assigned by the authority itself). As an example, let's assume that BBC wanted to make a CRID for (all the programs of) the Olympics in China. It may have looked something like this crid://bbc.co.uk/olympics/2008/ This would be a group CRID, that is, a CRID representing a group of contents. Then, to refer to a specific event – such as the women's shot-put final – they could have used the following inside their metadata. crid://bbc.co.uk/olympics/2008/final/shotput/women Currently, four types of CRIDs are playing a major role in some unidirectional television networks: programme CRID, series CRID, group CRID, and recommendation CRID. One of the most important applications of CRIDs is the so-called series link recording function (SL) of modern digital video recorders (DVR, PVR). In turn, a locator is a string of characters that contains all the necessary information for a receiver to find and acquire a given content, whether it is received through a transport stream, located in local storage, downloaded as a file from an Internet server, or through a streaming service. For example, a DVB locator will include all the necessary parameters to identify a specific content within a transport stream: network, transport stream, service, table and/or event identifiers. The locators' format, as established in TV-Anytime, is quite generic and simple, and corresponds to: [transport-mechanism]:[specific-data] The first part of the locator's format (the transport mechanism) must be a string of characters that is unique for each mechanism (transport stream, local file, HTTP Internet access...). The second part must be unambiguous only within the scope of a given transport mechanism and will be standardized by the organism in charge of the regulation of the mechanism itself. For instance, a DVB locator to identify a content within the transport stream of networks that follow this standard would be: dvb://112.4a2.5ec;2d22~20121212T220000Z—PT01H30M which would indicate a content (identified by the string “2d22”) that airs on a channel available on a DVB network identified by the address “112.4a2.5ec” (network “112”, transport stream “4a2” and service “5ec”), on 12 December 2012 at 10 p.m. and with a duration of 90 minutes. == The location resolution process == The location resolution process is the procedure by which, starting from the CRID of a given content, one or several locators of that content are obtained. Resolving a CRID can be a direct process, which leads immediately to one or many locators, or it may also happen that in the first place one or many intermediate CRIDs are returned, which must undergo the same procedure to finally obtain one or several locators. This procedure involves some information elements, among which we find two structures named resolving authority record (RAR) and ContentReferencingTable, respectively. Consulting them repeatedly will take the receiver from a CRID to one or many locators that will allow it to acquire the content. The RAR table The RAR table is one or many data structures that provide the receiver, for each authority that submits CRIDs, information on the corresponding resolution service provider. Among other things, it informs about which mechanism is used to provide information to resolve the CRIDs from each authority. That is, one or many RAR records must exist for each authority that indicate the receiver where it has to go to resolve the CRIDs of that particular authority. For example, in the record of the figure (expressed by means of a XML structure, according to the XML Schema defined in the TV-Anytime) there is an authority called “tve.es”, whose resolution service provider is the entity “rtve.es”, available on the URL "http://tva.rtve.es/locres/tve", which means there is resolution information in that URL. These RAR records will have reached the receiver in an indefinite form, unimportant for the TV-Anytime specification, which will depend on the specific transport mechanism of the network to which the receiver is connected. Each family of standards that regulates distribution networks (DVB, ATSC, ISDB, IPTV...) will have previously defined such procedure, which will be used by devices certified according to those standards. The ContentReferencingTable table The second structure involved in the location resolution process is a proper resolution table which, given a content's CRID, returns one or several locators that enable the receiver to access an instance of that content, or one or many CRIDs that allow it to move forward in the resolution process. The figure shows an example of this second structure, an XML document according to the specifications of the XML Schema defined in TV-Anytime. In it, several sections are included ( elements) that structure the information that describes each resolution case. The first one declares how a CRID (crid://tv.com/Friends/all), which corresponds to a group content that encompasses several episodes (two) of the “Friends” series is resolved. The result of the resolution process provides two new CRIDs each of them corresponding to one of the two episodes. The second element resolves the CRID of the first episode of the first season. The result of the resolution process is two DVB locators. The “acquire” attribute with “any” value indicates that any of them are good (the second one is a repetition broadcast a week later). The third element gives information about the second episode. It indicates that it cannot be resolved yet (“status” attribute with the “cannot yet resolve” value), indicating a date on which the request for resolution information must be repeated. The pro
Read more →
Spintronics

Spintronics (a portmanteau of spin transport electronics), also known as spin electronics, is the study of the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, in solid-state devices. The field of spintronics concerns spin-charge coupling in metallic systems. The analogous effects in insulators fall into the field of multiferroics. Spintronics fundamentally differs from traditional electronics in that, in addition to charge state, electron spins are used as a further degree of freedom, with implications in the efficiency of data storage and transfer. Spintronic systems are most often realised in dilute magnetic semiconductors (DMS) and Heusler alloys and are of particular interest in the field of quantum computing, such as atomtronics computation. == History == Spintronics emerged from discoveries in the 1980s concerning spin-dependent electron transport phenomena in solid-state devices. This includes the observation of spin-polarized electron injection from a ferromagnetic metal to a normal metal by Johnson and Silsbee (1985) and the discovery of giant magnetoresistance independently by Albert Fert et al. and Peter Grünberg et al. (1988). The origin of spintronics can be traced to the ferromagnet/superconductor tunneling experiments pioneered by Meservey and Tedrow and initial experiments on magnetic tunnel junctions by Julliere in the 1970s. The use of semiconductors for spintronics began with the theoretical proposal of a spin field-effect-transistor by Datta and Das in 1990 and of the electric dipole spin resonance by Rashba in 1960. In 2012, persistent spin helices of synchronized electrons were made to persist for more than a nanosecond, a 30-fold increase over earlier efforts, and longer than the duration of a modern processor clock cycle. In 2025, at 60 K (−213.2 °C; −351.7 °F) crystalline nickel(II) iodide (NiI2) was reported to exhibit p-wave magnetism, in which the spins of nickel atoms became arranged in a spiral pattern in two orientations. The orientations can be switched via a small electrical current. Applied in digital devices, this spintronics behavior requires far less current than the conventional charge-based electronics that powers devices such as computers and phones. == Theory == The spin of the electron is an intrinsic angular momentum that is separate from the angular momentum due to its orbital motion. The magnitude of the projection of the electron's spin along an arbitrary axis is 1 2 ℏ {\displaystyle {\tfrac {1}{2}}\hbar } , implying that the electron acts as a fermion by the spin-statistics theorem. Like orbital angular momentum, the spin has an associated magnetic moment, the magnitude of which is expressed as μ = 3 2 q m e ℏ {\displaystyle \mu ={\tfrac {\sqrt {3}}{2}}{\frac {q}{m_{e}}}\hbar } . In a solid, the spins of many electrons can act together to affect the magnetic and electronic properties of a material, for example endowing it with a permanent magnetic moment as in a ferromagnet. In many materials, electron spins are equally present in both the up and the down state, and no transport properties are dependent on spin. A spintronic device requires generation or manipulation of a spin-polarized population of electrons, resulting in an excess of spin up or spin down electrons. The polarization of any spin dependent property X can be written as P X = X ↑ − X ↓ X ↑ + X ↓ {\displaystyle P_{X}={\frac {X_{\uparrow }-X_{\downarrow }}{X_{\uparrow }+X_{\downarrow }}}} . A net spin polarization can be achieved either through creating an equilibrium energy split between spin up and spin down. Methods include putting a material in a large magnetic field (Zeeman effect), the exchange energy present in a ferromagnet or forcing the system out of equilibrium. The period of time that such a non-equilibrium population can be maintained is known as the spin lifetime, τ {\displaystyle \tau } . In a diffusive conductor, a spin diffusion length λ {\displaystyle \lambda } can be defined as the distance over which a non-equilibrium spin population can propagate. Spin lifetimes of conduction electrons in metals are relatively short (typically less than 1 nanosecond). An important research area is devoted to extending this lifetime to technologically relevant timescales. The mechanisms of decay for a spin polarized population can be broadly classified as spin-flip scattering and spin dephasing. Spin-flip scattering is a process inside a solid that does not conserve spin, and can therefore switch an incoming spin up state into an outgoing spin down state. Spin dephasing is the process wherein a population of electrons with a common spin state becomes less polarized over time due to different rates of electron spin precession. In confined structures, spin dephasing can be suppressed, leading to spin lifetimes of milliseconds in semiconductor quantum dots at low temperatures. Superconductors can enhance central effects in spintronics such as magnetoresistance effects, spin lifetimes and dissipationless spin-currents. The simplest method of generating a spin-polarised current in a metal is to pass the current through a ferromagnetic material. The most common applications of this effect involve giant magnetoresistance (GMR) devices. A typical GMR device consists of at least two layers of ferromagnetic materials separated by a spacer layer. When the two magnetization vectors of the ferromagnetic layers are aligned, the electrical resistance will be lower (so a higher current flows at constant voltage) than if the ferromagnetic layers are anti-aligned. This constitutes a magnetic field sensor. Two variants of GMR have been applied in devices: Current-in-plane (CIP), where the electric current flows parallel to the layers and, Current-perpendicular-to-plane (CPP), where the electric current flows in a direction perpendicular to the layers. Other metal-based spintronics devices: Tunnel magnetoresistance (TMR), where CPP transport is achieved by using quantum-mechanical tunneling of electrons through a thin insulator separating ferromagnetic layers. Spin-transfer torque, where a current of spin-polarized electrons is used to control the magnetization direction of ferromagnetic electrodes in the device. Spin-wave logic devices carry information in the phase. Interference and spin-wave scattering can perform logic operations. == Device types == === Spintronic-logic === Non-volatile spin-logic devices to enable scaling are being extensively studied. Spin-transfer, torque-based logic devices that use spins and magnets for information processing have been proposed. These devices are part of the ITRS exploratory road map. Logic-in memory applications are already in the development stage. A 2017 review article can be found in Materials Today. A generalized circuit theory for spintronic integrated circuits has been proposed so that the physics of spin transport can be utilized by SPICE developers and subsequently by circuit and system designers for the exploration of spintronics for "beyond CMOS computing". === Semiconductor === Doped semiconductor materials display dilute ferromagnetism. In recent years, dilute magnetic oxides (DMOs) including ZnO based DMOs and TiO2-based DMOs have been the subject of numerous experimental and computational investigations. N`0 sources (like manganese-doped gallium arsenide (Ga,Mn)As), increase the interface resistance with a tunnel barrier, or using hot-electron injection. Spin detection in semiconductors has been addressed with multiple techniques: Faraday/Kerr rotation of transmitted/reflected photons Circular polarization analysis of electroluminescence Nonlocal spin valve (adapted from Johnson and Silsbee's work with metals) Ballistic spin filtering The latter technique was used to overcome the lack of spin-orbit interaction and materials issues to achieve spin transport in silicon. Because external magnetic fields (and stray fields from magnetic contacts) can cause large Hall effects and magnetoresistance in semiconductors (which mimic spin-valve effects), the only conclusive evidence of spin transport in semiconductors is demonstration of spin precession and dephasing in a magnetic field non-collinear to the injected spin orientation, called the Hanle effect. === Storage media === Antiferromagnetic storage media have been studied as an alternative to ferromagnetism, especially since with antiferromagnetic material the bits can be stored as well as with ferromagnetic material. Instead of the usual definition 0 ↔ 'magnetisation upwards', 1 ↔ 'magnetisation downwards', the states can be, e.g., 0 ↔ 'vertically alternating spin configuration' and 1 ↔ 'horizontally-alternating spin configuration'.). The main advantages of antiferromagnetic material are: insensitivity to data-damaging perturbations by stray fields due to zero net external magnetization; no effect on near particles, implying that antiferromagnetic device elements wo
Read more →
Genigraphics

Genigraphics is a large-format printing service bureau specializing in providing poster session services to medical and scientific conferences throughout the US and Canada. The company began in 1973 as a division of General Electric. == History == Genigraphics began as a computer graphics system, developed by General Electric in the late 1960s, for NASA to use in space flight simulation. The technologies thus developed provided a foundation for the company's expansion into the commercial market. The Computed Images System & Services division (CISS, to become Genigraphics Corporation) of GE delivered the first presentation graphics system to Amoco Oil's corporate headquarters in 1973. It was named the 100 Series, and was based on DEC's PDP 11 series of mini computer systems. The first Genigraphics systems (100 Series and 100A Series) used an array of buttons, dials, knobs and joysticks, along with a built in keyboard, as the means of user interface. The PDP-11/40 computer was housed in a tall cabinet and used random access magnetic tape drives (DECtape) for storing completed presentations. The graphics generator (Forox recorder) was capable of outputting 2,000 line resolution, suitable for 35mm and 72mm film and large sheet film positive using larger cassettes for recording. 4000 and 8000 line resolution was later achieved with duplex scanning and 4x scanning by modifying to the Forox recorder's settings menu. Subsequent models (100B,C,D,D+ and D+/GVP) replaced the knobs and dials with an on screen, text based menu system, a graphics tablet and a pen. The pen/tablet combination gave way to a mouse like device in later models, and served to provide the interface with the graphics tools. User interaction with the computer for functions such as media initialization or modem to modem data transfer required a DECwriter serial terminal. In 1982, GE divested the Genigraphics division along with a host of other "non essential" business units (Genitext, Geniponics) and Genigraphics Corporation was born. Shortly after the divestiture, the headquarters of Genigraphics was moved from Liverpool, New York to Saddle Brook, New Jersey. Major success followed as the company grew exponentially over the next few years selling both systems and slide creation services. Genigraphics film recorders produced high-resolution digital images on 35mm film. The computer-generated scenes for The Last Starfighter were calculated on a Cray X-MP supercomputer and mastered with a Genigraphics film recorder. At its peak, Genigraphics Corporation employed roughly 300 people in 24 offices worldwide, with revenues upwards of $70 million annually. By the late 1980s Genigraphics saw demand for its proprietary systems dwindle and began selling the MASTERPIECE 8770 film recorder and GRAFTIME software as a peripheral for DEC Vaxes, IBM PC AT’s, and Mac NuBus machines. But the MASTERPIECE film recorder proved too expensive to sell in volume. In 1988, the company began a partnership with Microsoft to help develop the PowerPoint software. In exchange, every copy of PowerPoint included a “Send to Genigraphics” link to have files sent to a Genigraphics service bureau to be produced as 35mm slides. This partnership continued until 2001. In 1989, after three years of flat revenue, Genigraphics sold its hardware business in order to focus on its service bureau business and partnership with Microsoft via PowerPoint. In 1994, all assets of Genigraphics, including equipment, software development, in-house artwork, trademarks, and rights to the Microsoft partnership, were sold to InFocus Corporation of Wilsonville, Oregon who continued to operate under the Genigraphics brand name. The twenty-four service bureaus were consolidated to a 20,000 square foot facility next to the FedEx hub in Memphis, Tennessee. This allowed PowerPoint slide orders to be received until 10pm and delivered across the United States by the following morning. In 1995, InFocus registered www.genigraphics.com and was among the first to offer a form of ecommerce allowing 35mm slides, color prints and transparencies, printed booklets, and digital projectors to be purchased online. In 1998, then current management bought Genigraphics from InFocus and have operated it continuously ever since as Genigraphics LLC. That same year, InFocus projector rentals were added to the “Send to Genigraphics” link in PowerPoint and Genigraphics became the rental and repair center for all InFocus national accounts. It also marked Genigraphics entry into the new industry of large format printing; leveraging their knowledge of, and access to, PowerPoint programming code to develop a proprietary printer driver to output directly to an Epson 9500 wide format printer. At the time, Genigraphics was the exclusive 35mm slide vendor for all Kinko’s stores in the United States and poster printing was added to the arrangement. In 2003, Genigraphics closed their 35mm slide E6 photo lab – one of the last high-volume commercial E6 labs in the US – and expanded their large format printing capabilities. Since 2003, Genigraphics has become a major player in the poster session market, providing printing and on-site services to medical and scientific conferences throughout the US and Canada. As of February 2019, over 150,000 medical or scientific ‘ePosters’ are made available through their ResearchPosters.com archive service. === Partnership with Microsoft and development of PowerPoint === As presentations began to be created on personal computers in the late 80’s, Genigraphics sought presentation software partners in Silicon Valley who would be interested in sending files to Genigraphics via dial-up modem to be produced on 35mm slides. In 1987, Michael Beetner, Director of Marketing Planning for Genigraphics, met with Robert Gaskins, head of Microsoft's Graphics Business Unit, who was leading the development of the newly released PowerPoint software. A joint development agreement between Microsoft and Genigraphics was agreed upon and announced at Mac World 1988. According to Erica Robles-Anderson and Patrik Svensson, "It would be hard to overestimate Genigraphics’ influence on PowerPoint. PowerPoint 2.0 was designed for Genigraphics film recorders. It shipped with Genigraphics color palettes, schemes, and the distinctively Genigraphics color-gradient backgrounds. The application contained a ‘Send to Genigraphics’ menu item that wrote the presentation to floppy disk or transmitted the order directly via modem. Within three and a half months PowerPoint orders accounted for ten percent of revenue at Genigraphics service centers. PowerPoint 3.0 was even more intimately dependent upon Genigraphics. The software incorporated a collection of clip art images and symbols that had been produced by hundreds of artists at dozens of service centers across tens of thousands of presentations. Genigraphics artists designed PowerPoint 3.0 colors, templates, and sample presentations. The software even used Genigraphics (rather than Excel) chart style. Bar charts were rendered two-dimensionally with apparent thickness added to make them seemingly recede from the axes. The technique made it easier for viewers to compare bar heights and estimate values from axis ticks and labels. Pie charts were handled analogously. Microsoft paid Genigraphics to produce more than 500 clip art drawings and symbols used in Microsoft programs.” In exchange for Genigraphics development efforts, Microsoft included a “Send to Genigraphics” link in every copy of PowerPoint through the 10.0 version (2000/2001). The arrangement came to an end when Microsoft restructured as a result of anti-trust lawsuits.
Read more →
Open Rights Group

The Open Rights Group (ORG) is a UK-based organisation that works to preserve digital rights and freedoms by campaigning on digital rights issues and by fostering a community of grassroots activists. It campaigns on numerous issues including mass surveillance, internet filtering and censorship, and intellectual property rights. == History == The organisation was started by Danny O'Brien, Cory Doctorow, Ian Brown, Rufus Pollock, James Cronin, Stefan Magdalinski, Louise Ferguson and Suw Charman after a panel discussion at Open Tech 2005. O'Brien created a pledge on PledgeBank, placed on 23 July 2005, with a deadline of 25 December 2005: "I will create a standing order of 5 pounds per month to support an organisation that will campaign for digital rights in the UK but only if 1,000 other people will too." The pledge reached 1000 people on 29 November 2005. The Open Rights Group was launched at a "sell-out" meeting in Soho, London. == Work == The group has made submissions to the All Party Internet Group (APIG) inquiry into digital rights management and the Gowers Review of Intellectual Property. The group was honoured in the 2008 Privacy International Big Brother Awards alongside No2ID, Liberty, Genewatch UK and others, as a recognition of their efforts to keep state and corporate mass surveillance at bay. In 2010 the group worked with 38 Degrees to oppose the introduction of the Digital Economy Act, which was passed in April 2010. The group opposes measures in the draft Online Safety Bill introduced in 2021, that it sees as infringing free speech rights and online anonymity. The group campaigns against the Department for Digital, Culture, Media and Sport's plan to switch to an opt-out model for cookies. The group spokesperson stated that "[t]he UK government propose to make online spying the default option" in response to the proposed switch. == Areas of interest == The organisation, though focused on the impact of digital technology on the liberty of UK citizens, operates with an apparently wide range of interests within that category. Its interests include: === Access to knowledge === Copyright Creative Commons Free and open source software The public domain Crown copyright Digital Restrictions Management Software patents === Free speech and censorship === Internet filtering Right to parody s. 127 Communications Act 2003 === Government and democracy === Electronic voting Freedom of information legislation === Privacy, surveillance and censorship === Automatic Vehicle Tracking Communications data retention Identity management Net Neutrality NHS patients' medical database Police DNA Records RFID == Structure == ORG has a paid staff, whose members include: Jim Killock (executive director) Former staff include Suw Charman-Anderson and Becky Hogge, both executive directors, e-voting coordinator Jason Kitcat, campaigner Peter Bradwell, grassroots campaigner Katie Sutton and administrator Katerina Maniadaki. Neil Gaiman was previously the group's patron. As of October 2022, the group had over 43,000 supporters. == ORGCON == ORGCON was the first ever conference dedicated to digital rights in the UK, marketed as "a crash course in digital rights". It was held for the first time in 2010 at City University in London and included keynote talks from Cory Doctorow, politicians and similar pressure groups including Liberty, NO2ID and Big Brother Watch. ORGCON has since been held in 2012, 2013, 2014, 2017, and 2019 where the keynote was given by Edward Snowden.
Read more →
Data communication

Data communication is the transfer of data over a point-to-point or point-to-multipoint communication channel. Data communication comprises data transmission and data reception and can be classified as analog transmission and digital communications. Analog data communication conveys voice, data, image, signal or video information using a continuous signal, which varies in amplitude, phase, or some other property. In baseband analog transmission, messages are represented by a sequence of pulses by means of a line code; in passband analog transmission, they are communicated by a limited set of continuously varying waveforms, using a digital modulation method. Passband modulation and demodulation are carried out by modem equipment. Digital transmission and digital reception are the transfer of either a digitized analog signal or a born-digital bitstream. Baseband digital transmission is regarded as comprising part of a digital signal, whereas passband transmission of digital data may also or alternatively be considered a form of digital-to-analog conversion. Data communication channels include copper wires, optical fibers, wireless communication using radio spectrum, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radiowave, microwave, or infrared signal. == Distinction between related subjects == Digital transmission or data transmission traditionally belongs to telecommunications and electrical engineering. Basic principles of data transmission may also be covered within the computer science or computer engineering topic of data communications, which also includes computer networking applications and communication protocols, for example, routing, switching and inter-process communication. Although the Transmission Control Protocol (TCP) involves transmission, TCP and other transport layer protocols are covered in computer networking but not discussed in a textbook or course about data transmission. In most textbooks, the term analog transmission only refers to the transmission of an analog message signal (without digitization) by means of an analog signal, either as a non-modulated baseband signal or as a passband signal using an analog modulation method such as AM or FM. It may also include analog-over-analog pulse modulated baseband signals such as pulse-width modulation. In a few books within the computer networking tradition, analog transmission also refers to passband transmission of bit-streams using digital modulation methods such as FSK, PSK and ASK. The theoretical aspects of data transmission are covered by information theory and coding theory. == Protocol layers and sub-topics == Courses and textbooks in the field of data transmission typically deal with the following OSI model protocol layers and topics: Layer 1, the physical layer: Channel coding including Digital modulation schemes Line coding schemes Forward error correction (FEC) codes Bit synchronization Multiplexing Equalization Channel models Layer 2, the data link layer: Channel access schemes, media access control (MAC) Packet mode communication and Frame synchronization Error detection and automatic repeat request (ARQ) Flow control Layer 6, the presentation layer: Source coding (digitization and data compression), and information theory. Cryptography (may occur at any layer) It is also common to deal with the cross-layer design of those three layers. == Applications and history == Data (mainly but not exclusively informational) has been sent via non-electronic (e.g. optical, acoustic, mechanical) means since the advent of communication. Analog signal data has been sent electronically since the advent of the telephone. However, the first data electromagnetic transmission applications in modern time were electrical telegraphy (1809) and teletypewriters (1906), which are both digital signals. The fundamental theoretical work in data transmission and information theory by Harry Nyquist, Ralph Hartley, Claude Shannon and others during the early 20th century, was done with these applications in mind. In the early 1960s, Paul Baran invented distributed adaptive message block switching for digital communication of voice messages using switches that were low-cost electronics. Donald Davies invented and implemented modern data communication during 1965–7, including packet switching, high-speed routers, communication protocols, hierarchical computer networks and the essence of the end-to-end principle. Baran's work did not include routers with software switches and communication protocols, nor the idea that users, rather than the network itself, would provide the reliability. Both were seminal contributions that influenced the development of computer networks. Data transmission is utilized in computers in computer buses and for communication with peripheral equipment via parallel ports and serial ports such as RS-232 (1969), FireWire (1995) and USB (1996). The principles of data transmission are also utilized in storage media for error detection and correction since 1951. The first practical method to overcome the problem of receiving data accurately by the receiver using digital code was the Barker code invented by Ronald Hugh Barker in 1952 and published in 1953. Data transmission is utilized in computer networking equipment such as modems (1940), local area network (LAN) adapters (1964), repeaters, repeater hubs, microwave links, wireless network access points (1997), etc. In telephone networks, digital communication is utilized for transferring many phone calls over the same copper cable or fiber cable by means of pulse-code modulation (PCM) in combination with time-division multiplexing (TDM) (1962). Telephone exchanges have become digital and software controlled, facilitating many value-added services. For example, the first AXE telephone exchange was presented in 1976. Digital communication to the end user using Integrated Services Digital Network (ISDN) services became available in the late 1980s. Since the end of the 1990s, broadband access techniques such as ADSL, Cable modems, fiber-to-the-building (FTTB) and fiber-to-the-home (FTTH) have become widespread to small offices and homes. The current tendency is to replace traditional telecommunication services with packet mode communication such as IP telephony and IPTV. Transmitting analog signals digitally allows for greater signal processing capability. The ability to process a communications signal means that errors caused by random processes can be detected and corrected. Digital signals can also be sampled instead of continuously monitored. The multiplexing of multiple digital signals is much simpler compared to the multiplexing of analog signals. Because of all these advantages, because of the vast demand to transmit computer data and the ability of digital communications to do so and because recent advances in wideband communication channels and solid-state electronics have allowed engineers to realize these advantages fully, digital communications have grown quickly. The digital revolution has also resulted in many digital telecommunication applications where the principles of data transmission are applied. Examples include second-generation (1991) and later cellular telephony, video conferencing, digital TV (1998), digital radio (1999), and telemetry. Data transmission, digital transmission or digital communications is the transfer of data over a point-to-point or point-to-multipoint communication channel. Examples of such channels include copper wires, optical fibers, wireless communication channels, storage media and computer buses. The data are represented as an electromagnetic signal, such as an electrical voltage, radio wave, microwave, or infrared light. While analog transmission is the transfer of a continuously varying analog signal over an analog channel, digital communication is the transfer of discrete messages over a digital or an analog channel. The messages are either represented by a sequence of pulses by means of a line code (baseband transmission) or by a limited set of continuously varying waveforms (passband transmission), using a digital modulation method. The passband modulation and corresponding demodulation (also known as detection) are carried out by modem equipment. According to the most common definition of a digital signal, both baseband and passband signals representing bit-streams are considered as digital transmission, while an alternative definition only considers the baseband signal as digital, and passband transmission of digital data as a form of digital-to-analog conversion. Data transmitted may be digital messages originating from a data source, for example, a computer or a keyboard. It may also be an analog signal, such as a phone call or a video signal, digitized into a bit-stream, for example,e using pulse-code modulation (PCM) or more advanced source coding (analog-to-digital conversion and
Read more →
Control communications

In telecommunications, control communications is the branch of technology devoted to the design, development, and application of communications facilities used specifically for control purposes, such as for controlling (a) industrial processes, (b) movement of resources, (c) electric power generation, distribution, and utilization, (d) communications networks, and (e) transportation systems.
Read more →
Generatrix

In geometry, a generatrix () or describent is a point, curve or surface that, when moved along a given path, generates a new shape. The path directing the motion of the generatrix motion is called a directrix or dirigent. == Examples == A cone can be generated by moving a line (the generatrix) fixed at the future apex of the cone along a closed curve (the directrix); if that directrix is a circle perpendicular to the line connecting its center to the apex, the motion is rotation around a fixed axis and the resulting shape is a circular cone. The generatrix of a cylinder, a limiting case of a cone, is a line that is kept parallel to some axis.
Read more →
Ambient awareness

Ambient awareness (AmA) is a term used by social scientists to describe a form of peripheral social awareness through social media. This awareness is propagated from relatively constant contact with one's friends and colleagues via social networking platforms on the Internet. The term essentially defines the sort of omnipresent knowledge one experiences by being a regular user of these media outlets that allow a constant connection with one's social circle. According to Clive Thompson of The New York Times, ambient awareness is "very much like being physically near someone and picking up on mood through the little things; body language, sighs, stray comments". Academic Andreas Kaplan defines ambient awareness as "awareness created through regular and constant reception, and/or exchange of information fragments through social media". Two friends who regularly follow one another's digital information can already be aware of each other's lives without actually being physically present to have had a conversation. == Social == Socially speaking, ambient awareness and social media are products of the new generations who are being born or growing up in the digital age, starting circa 1998 and running to current times. Social media is personal media (what you're doing in the moment, how you feel, a picture of where you are) combined with social communication. Social media is the lattice work for ambient awareness. Without social media the state of ambient awareness cannot exist. Artificial Social Networking Intelligence (ASNI) refers to the application of artificial intelligence within social networking services and social media platforms. It encompasses various technologies and techniques used to automate, personalize, enhance, improve, and synchronize user's interactions and experiences within social networks. ASNI is expected to evolve rapidly, influencing how we interact online and shaping their digital experiences. Transparency, ethical considerations, media influence bias, and user control over data will be crucial to ensure responsible development and positive impact. A significant feature of social media is that it is created by those who also consume it. Mostly, those participating in this phenomenon are adolescents, college age, or young adult professionals. According to Dr. Mimi Ito, a cultural anthropologist and Professor in Residence at the University of California at Irvine, the mobile device is the greatest proxy device used to create and distribute Social Media. She reportedly states that "teenagers capture and produce their own media, and stay in constant ambient contact with each other..." using mobile devices. Usually while doing this they are consuming other forms of media such as music or video content via their smart phones, tablets, or other similar devices. Effectively this has led social scientists to believe that learning and multitasking will have a new face as the products of the digital generation enter the work force and begin to integrate their learning methods into the standard preexisting business models of today. Professors Kaplan and Haenlein see ambient awareness as one of the major reasons for the success of such microblogging sites as Twitter. == Origins == The earliest available technology that could be used for constant social contact is the cell phone. For the first time, people could be contacted readily and at will beyond the confines of their work or homes. Then later, with the additional service of texting, one can see the somewhat primitive form of the status update. Since the text message only allows for 160 characters to transmit pertinent information it paved the way for the status update as we know it today. The transition from only having a few points of regular long distance contact, to being constantly available via cell phone, is what primed society for social networking websites. Perhaps the first instance where these websites created the possibility of larger scale ambient awareness was when Facebook installed the news feed. The news feed automatically sends compiled information on all of a users contacts activities directly to them so that they can access all of the happenings in their world from one location. For the first time, becoming someone's Facebook friend was the equivalent of subscribing to a feed of their daily minutiae. Since this innovation, a new wave of micro-blogging services have emerged, such as Twitter or Tumblr. Although these services have often been criticized as containing seemingly meaningless snippets of information, when a follower gathers a certain amount of information, they begin to obtain an ambient understanding of who they are following. This has led to the mass usage of social media as not only a social tool but also as a marketing and business tool. == Uses in marketing == Websites such as Twitter, YouTube, Facebook, and Myspace, among many others, have been used by people in all forms of business to create a closer digital/ambient bond with their clientele base. This is most notably seen in the music industry where social media networking has become the mainstay of all advertising for independent and major artists. The effect of this type of ambient marketing is that the consumer begins to get a sense of the artist's life style and personality. In this way social media outlets and ambient awareness have managed to tighten the gap between consumers and producers in all areas of business. == Uses in business processes == As web-based collaboration tools and social project management suites proliferate, the addition of activity streams to those products help to create business context-specific ambient awareness, and produce a new class of products, such as social project management platforms.
Read more →
Interstellar communication

Interstellar communication is the transmission of signals between planetary systems. Sending interstellar messages is potentially much easier than interstellar travel, being possible with technologies and equipment which are currently available. However, the distances from Earth to other potentially inhabited systems introduce prohibitive delays, assuming the limitations of the speed of light. Even an immediate reply to radio communications sent to stars tens of thousands of light-years away would take many human generations to arrive. == Radio == The SETI project has for the past several decades been conducting a search for signals being transmitted by extraterrestrial life located outside the Solar System, primarily in the radio frequencies of the electromagnetic spectrum. Special attention has been given to the Water Hole, the frequency of one of neutral hydrogen's absorption lines, due to the low background noise at this frequency and its symbolic association with the basis for what is likely to be the most common system of biochemistry (but see alternative biochemistry). The regular radio pulses emitted by pulsars were briefly thought to be potential intelligent signals; the first pulsar to be discovered was originally designated "LGM-1", for "Little Green Men." They were quickly determined to be of natural origin, however. Several attempts have been made to transmit signals to other stars as well. (See "Realized projects" at Active SETI.) One of the earliest and most famous was the 1974 radio message sent from the largest radio telescope in the world, the Arecibo Observatory in Puerto Rico. An extremely simple message was aimed at a globular cluster of stars known as M13 in the Milky Way Galaxy and at a distance of 30,000 light years from the Solar System. These efforts have been more symbolic than anything else, however. Further, a possible answer needs double the travel time, i.e. tens of years (near stars) or 60,000 years (M13). == Other methods == It has also been proposed that higher frequency signals, such as lasers operating at visible light frequencies, may prove to be a fruitful method of interstellar communication; at a given frequency it takes surprisingly small energy output for a laser emitter to outshine its local star from the perspective of its target. Other more exotic methods of communication have been proposed, such as modulated neutrino or gravitational wave emissions. These would have the advantage of being essentially immune to interference by intervening matter. Sending physical mail packets between stars may prove to be optimal for many applications. While mail packets would likely be limited to speeds far below that of electromagnetic or other light-speed signals (resulting in very high latency), the amount of information that could be encoded in only a few tons of physical matter could more than make up for it in terms of average bandwidth. The possibility of using interstellar messenger probes for interstellar communication — known as Bracewell probes — was first suggested by Ronald N. Bracewell in 1960, and the technical feasibility of this approach was demonstrated by the British Interplanetary Society's starship study Project Daedalus in 1978. Starting in 1979, Robert Freitas advanced arguments for the proposition that physical space-probes provide a superior mode of interstellar communication to radio signals, then undertook telescopic searches for such probes in 1979 and 1982.
Read more →