AI Chatbot Ethics

AI Chatbot Ethics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Georges Giralt PhD Award

    Georges Giralt PhD Award

    The Georges Giralt PhD Award is a European scientific prize for extraordinary contributions to robotics. It is awarded yearly at the European Robotics Forum by euRobotics AISBL, a non-profit organisation based in Brussels with the objective of turning robotics beneficial for Europe’s economy and society. Georges Giralt received his PhD in 1958, from Paul Sabatier University, in the domain of electrical machines, and soon afterwards became a pioneer in robotics, in Europe and worldwide. He was especially instrumental in bringing in scientific foundations and methodology when the domain was still young, and a loose coupling of mechanical and electrical engineering, adopting the early results of automatic control. The high reputation of the Georges Giralt PhD Award is based on the prominent role of the awarding institution euRobotics. With more than 250 member organisations, euRobotics represents the academic and industrial robotics community in Europe. Moreover, it provides the European robotics community with a legal entity to engage in a public/private partnership with the European Commission. The award is covered by various media. Entitled for participation in the Georges Giralt PhD Award are all robotics-related dissertations which have been successfully defended at a European university. The US-American counterpart is the Dick Volz Award. == Award winners == 2026: Antonio González Morgado 2025: Erfan Shahriari 2024: Manuel Keppler 2023: Antonio Andriella, Ribin Balachandran 2022: Antonio Loquercio, Michael Lutter 2021: Giuseppe Averta, Bernd Henze 2020: Cosimo Della Santina 2019: Grazioso Stanislao, Teodor Tomic 2018: Frank Bonnet, Daniel Leidner 2017: Johannes Englsberger 2016: Alexander Dietrich, Mark Müller 2015: Jörg Stückler 2014: Manuel Catalano, Fabien Expert, Rainer Jaekel 2013: Jens Kober 2012: Sami Haddadin 2011: Mario Pratts 2010: Ludovic Righetti 2009: Alejandro-Dizan Vasquez-Govea 2008: Cyrill Stachniss, Eduardo Rocon 2007: Pierre Lamon 2006: Martijn Wisse 2005: Juan Andrade Cetto 2004: Gilles Duchemin 2003: Ralf Koeppe 2002: Gianluca Antonelli, Jens-Steffen Gutmann

    Read more →
  • Diagnostically acceptable irreversible compression

    Diagnostically acceptable irreversible compression

    Diagnostically acceptable irreversible compression (DAIC) is the amount of lossy compression which can be used on a medical image to produce a result that does not prevent the reader from using the image to make a medical diagnosis. The term was first introduced at a workshop on irreversible compression convened by the European Society of Radiology (ESR) in Palma de Mallorca October 13, 2010, the results of which were reported in a subsequent position paper. == Determination == The "amount of compression" in irreversible compression used to be determined by the compression ratio, where the acceptable minimum is determined by the algorithm (typically JPEG or J2K) and the data type (body part and imaging method). Such a definition is easy to follow, and has been used by medical bodies in 2010 around the world. However, its downside is obvious: the compression ratio tells nothing about the real quality of the image, as different compressors can produce vastly different qualities under the same file size. For example, the JPEG format of 1992 can perform as well as many modern formats given newer techniques exploited in mozjpeg and ISO libjpeg, yet they would be lumped together with the legacy encoders in such a scheme. The image compression community has long used objective quality metrics like SSIM to measure the effects of compression. In the absence of good data regarding SSIM, the ESR review of 2010 concluded that it is still difficult to establish a criterion for whether a particular irreversible compression scheme applied with particular parameters to a particular individual image, or category of images, avoids the introduction of some quantifiable risk of a diagnostic error for any particular diagnostic task. A 2017 study showed that a SSIM variant called 4-G-r (4-component, gradient, structural component of SSIM) best reflects changes in images that affect the decision of radiologists out of 16 SSIM variants. A 2020 study shows that visual information fidelity (VIF), feature similarity index (FSIM), and noise quality metric (NQM) best reflect radiologist preferences out of ten metrics. It also mentions that the original version of SSIM works as poorly as a basic root-mean-square distance (RMSD) for this purpose, a result echoed by the 2017 study. The 4-G-r modification is not tested in the study.

    Read more →
  • D4Science

    D4Science

    D4Science is a Data Infrastructure offering services by community-driven virtual research environments. In particular, it supports communities of practice willing to implement open science practices, thus it is an Open Science Infrastructure. The infrastructure follows the system of systems approach, where the constituent systems (Service providers) offer "resources" (namely services and by them data, computing, storage) assembled together to implement the overall set of D4Science services. In particular, D4Science aggregates "domain agnostic" service providers as well as community-specific ones to build a unifying space where the aggregated resources can be exploited via Virtual research Environments and their services. It is spread across several sites, the primary one is hosted by the Istituto di Scienza e Tecnologie dell'Informazione of National Research Council (Italy). At the earth of this infrastructure there is an Open Source Software named gCube system. == Services == D4Science offers: Virtual Research Environment as a Service providing any community of practice with a dedicated working environment supporting any knowledge production process in a collaborative way, in fact every VRE enables computer-supported cooperative work by design. D4Science-based VREs are web-based, community-oriented, collaborative, user-friendly, open-science-enabler working environments for scientists and practitioners willing to work together to perform a set of (research) task. From the end-user perspective, each VRE manifests in a unifying web application (and a set of application programming interfaces (APIs)): (a) comprising several applications organised in specific menu items and (b) running in a plain web browser. Every application is providing VRE users with facilities implemented by relying on one or more services provisioned by diverse providers. Among the basic services every VRE is equipped with there are a Social Networking area enabling collaborative and open discussions on any topic and disseminating information of interest for the community, for example, the availability of a research outcome; a Workspace for storing, organizing and sharing any version of a research artifact, including dataset and model implementation; a User Management dashboard for managing membership and roles; a Catalogue Service recording the assets worth being published thus to make it possible for others to be informed and make use of these assets. Science Gateway as a Service providing a community of practice with a dedicated science gateway hosting a selected set of virtual research environments. Data Analytics at scale for data analytics including: a proprietary data analytics platform (DataMiner) to execute analytics tasks either by relying on methods provided by the user or by others. It is endowed with importing and sharing facilities for analytics methods implemented in heterogeneous forms including R, Java, Python, and KNIME. The platform enacts tasks execution by a distributed and hybrid computing infrastructure. Moreover, one of the worth highlighting feature of this platform is its open science-friendliness. All the analytics methods integrated in it are exposed by a standard protocol (the OGC WPS protocol) clients can use to get informed on available methods as well as to start processes, monitor their execution and access results. Every analytics task performed by the platform automatically produces a provenance record catering for the reproducibility of the task; an RStudio-based development environment for R enabling to perform statistical computing tasks in the cloud. This RStudio environment is (i) preconfigured with libraries and packages to ease the execution of common data analytics tasks, and (ii) provides seamless access to the VRE Workspace enabling sharing of resources with other members of the same working environment. a Jupyter-based notebook environment for developing and executing interactive computing by JupyterLab instances. Each JupyterLab is (i) preconfigured with libraries and packages to ease the execution of common data analytics tasks, and (ii) provides access to the VRE Workspace enabling sharing of resources with other members of the same working environment. == Community == The D4Science Infrastructure serves more than 24,000 registered users (August 2024) through 177 active VREs offered via 20 Science gateways. This extensive infrastructure not only supports a diverse range of scientific communities but also fosters significant engagement and collaboration among researchers worldwide. Engagement within the D4Science community is robust, with users benefiting from user-friendly application environments tailored to their specific needs. The platform allows users to securely preserve, access, and share their data from anywhere, fostering a collaborative and inclusive research environment. Additionally, groups of users can create their own virtual environments and customise them with the applications they need, further enhancing the platform's flexibility and usability. Supported communities and cases range from Agri-food to Social Data Science, Earth Science and Marine Science. These diverse applications demonstrate the versatility and broad applicability of the D4Science Infrastructure, making it an invaluable resource for researchers across various scientific domains. == History == The D4Science development has been supported by several European-funded projects. DILIGENT (2004-2007) in the Sixth Framework Programme for Research and Technological Development was the forerunner where a testbed infrastructure built by integrating digital library and grid computing technologies and resources was conceived and developed to serve the needs of communities of practice involved in knowledge development. In the context of the Seventh Framework Programme for research, technological development and demonstration the development of the D4Science initiative. In this period the infrastructure was established and developed to serve communities of practices from domains ranging from Earth Science to Marine Science with worldwide scope In the context of the H2020 research and innovation programme the maturity level of the D4Science infrastructure was high enough to allow a large and very diverse set of communities of practice to benefit from it and its services and further contribute to its development. Moreover, the services offered by the infrastructure have been developed to support open science practices. The operation and improvement of the D4Science infrastructure facilities are still ongoing while its exploitation is progressively growing.

    Read more →
  • WorkingPoint

    WorkingPoint

    WorkingPoint is a web-based application that provides a suite of small business management tools. It is designed to serve as a single point of access for various business operations, featuring a user-friendly interface. WorkingPoint's functionalities include double-entry bookkeeping, contact management, inventory management, invoicing, and bill and expense management. == Company == WorkingPoint, formerly Netbooks Inc, is a privately held corporation based in San Francisco, CA. The company is backed by CMEA Capital, also based in San Francisco. WorkingPoint has about ten employees and is led by CEO Tate Holt and Chairman Tom Proulx. Proulx is a co-founder of Intuit and an original author of that company’s Quicken personal finance software. The company was founded in 2007 under its original name Netbooks by co-creator Ridgely Evers. Evers set out to design a product that was more user-friendly than Intuit’s Quickbooks, which he also co-created. In mid-2009 the company officially rebranded itself and its flagship product “WorkingPoint”. The purpose of the re-branding was to disassociate the company from the product category of small laptops also known as netbooks. == Social Media Presence == WorkingPoint maintains a daily blog geared toward small business owners and managers. Each week the blog is updated with 3 WorkingPoint product feature or “how-to” posts, 2 subscriber company profiles, and 2 small business coaching posts. The company also maintains a Twitter page and a Facebook page. == Product Description (Free Version) == WorkingPoint allows businesses to invoice up to five customers (repeatedly) and provides account access for up to two individual users free of charge. Online Invoicing WorkingPoint allows users to create customized quotes and invoices online. The invoices can be used to bill customers via email or hardcopy post. WorkingPoint compiles the info from these invoices so users can track customer payments, inventory costs, shipping charges, accounts receivable and sales taxes. Users can also manage customer overpayments, provide customer loyalty discounts, and view a customer invoice history. Bill & Expense Management Users can track their bills and expenses by entering info into the WorkingPoint interface. WorkingPoint compiles this info so users can track categorized expenses, accounts paid, accounts payable, and vendor purchase history. The interface also allows users to add to their inventory while entering billing info. Double-Entry Bookeeping WorkingPoint automatically records entries under the double-entry bookkeeping system (also known as debits and credits) when the user completes invoicing and expense forms. Users can view transactions in general ledger format and perform closing entries if necessary. This functionality is designed for users who do not have an accounting background. Business Contact Management WorkingPoint provides an interface for users to manage their customer and vendor contact info. The software automatically tracks the user’s relationship with contacts, so users can track a contact’s sales and purchase history. Contacts can be imported and exported via numerous email clients including Microsoft Outlook, Yahoo! Mail, Google Gmail, and Mac Address Book. Inventory Management The software automatically adjusts inventory quantities after every purchase and sale. Users can track their current inventory quantity, average cost of inventory on-hand, cost of goods sold (COGS) and top-selling products. Users can also make manual adjustments to inventory when necessary. Financial Reporting Users can view a balance sheet, income statement, or cash flow statement pertaining to their business. The software automatically manages accruals to produce the balance sheet and income statement. Users can choose a data range from which to draw any of these reports. Financial reports can be converted to pdf format or exported (with formulas intact) to OpenOffice or Microsoft Excel. Cash Management WorkingPoint enables users to monitor cash balances on their bank accounts. The software automatically tracks cash inflows and outflows when users manage their accounts payable and accounts receivable. Business Dashboard The Business Dashboard visually and graphically displays key real-time business data. Users can customize the Dashboard to display data of their choosing. Online Company Profile Users can create an online company profile in order to have a presence on the Internet and as a basis for participation in WorkingPoint’s small business community features. Public profiles are featured in the WorkingPoint Company Directory and can be viewed externally using the URL format: https://businessname.workingpoint.com. == Product Description (Premium Version) == The premium version of WorkingPoint costs $10 per month. It includes all of the functionalities of the free version, allowing unlimited invoicing and account access. It also offers the following functions: 1099 Tax Reporting, invoice payment collection via PayPal, Email Marketing via VerticalResponse, and the Premium Reports & Accounting Package. 1099 Tax Reporting Users can identify qualifying companies and individuals for IRS Form 1099 or IRS Form 1096 reporting. WorkingPoint automatically tracks payments made to these companies and individuals. Users can then generate 1099 reports for distribution. Premium Reports & Accounting Package This includes: a Daily Operating Report providing users with sales and cash flow information, customizable accounts categorization, and cash flow statements using the indirect method of reporting. Invoice Payment Collection via PayPal Users can collect payment on their invoices via PayPal. Email Marketing via VerticalResponse The WorkingPoint premium package includes 500 email credits with the email marketing firm VerticalResponse.

    Read more →
  • Computer Dreams

    Computer Dreams

    Computer Dreams is a 1988 film created by Digital Vision Entertainment and released by MPI Home Video. Written, produced and directed by Geoffrey de Valois and hosted by Amanda Pays, it consists primarily of clips and behind-the-scenes work of early computer graphics animation. Notably included are Luxo Jr. and Red's Dream, the first two short films from Pixar. The film is an hour long and features an electronic score by Music Fantastic. It was revised and re-released on DVD as The History of Computer Animation, Volume 2. It won the Winner Gold Special Jury Award at the 1989 Houston International Film Festival, and the 1989 Golden Decade Award from the US Film & Video Festival. Music used includes: Gail Lennon - Desire, Gail Lennon - Like A Dream, Shandi Sinnamon - Making It,

    Read more →
  • Easyrec

    Easyrec

    easyrec is an open-source program that provides personalized recommendations using RESTful Web services to be integrated into Web enabled applications. It is distributed under the GNU General Public License by the Studio Smart Agent Technologies and hosted at SourceForge. It is written in Java, uses a MySQL database and comes with an administration tool. == History == The development of easyrec, an implementation of the Adaptive Personalization approach, started in the course of several research and development projects conducted by the Studio Smart Agent Technologies in close cooperation with international companies. During the year of 2008 the core functionality of easyrec was developed forming the basis of research prototypes focusing on the music domain (e.g. MusicExplorer). In June 2009 a beta version of easyrec, containing basic administration features, was integrated into a movie streaming portal for evaluation purposes. Furthermore, in September 2009 easyrec was awarded a special recognition in the category “Award for Innovations – IT Innovations for an economic upswing” by the jury of the Austrian state prize for multimedia and e-business. After a comprehensive refactoring phase and the integration of the evaluation results easyrec was published on SourceForge on 18 February 2010. In course of the CeBIT tradeshow 2011 in Hanover easyrec has been awarded the German “INNOVATIONSPREIS-IT 2011”. == Principles == The following five primary goals guided the development of easyrec. It should be a ready-to-use application, not another algorithmic framework It should be easy to use, concerning installation, integration and administration It should be robust and scalable for serving real world applications It should be free of charge, so that anyone can profit from personalization features It should rely on a community-driven development == Uses == Although easyrec is a domain-agnostic, general purpose personalization system, the current Web service API is customized for providing online shops with item recommendations. Especially for small and medium enterprises, easyrec provides a low barrier entrance to personalization. == Features == A major feature of easyrec is a set of usage statistics and other business relevant information presented via an administration and management interface. Furthermore, the easyrec administrator is supported by a variety of administration and configuration functions including the manual import or adaptation of business rules. Integrators or developers benefit from the lightweight Web service APIs (REST and SOAP) as well as from the guided installation wizard. Concerning personalization functionality easyrec is providing the following services unpersonalized recommendations of the form "other users also bought/viewed/...", etc. personalized recommendation depending on individual preferences rankings such as "most bought items", "most viewed...", etc. Additionally, as an integration showcase, a MediaWiki extension was developed and is bundled with the application. Currently additional features like further recommender algorithms and a plugin-system are evaluated and prepared for integration into the easyrec system. == Architecture == The underlying architecture of easyrec is designed to be robust and scalable—separating time-consuming computations from the task of online assembling of recommendations. easyrec is designed as a multi-layer system consisting of a database layer as storage of user actions and pre-calculated business rules an application layer for hosting online and offline recommendation services and an API layer for various Web service interfaces. Moreover, the generator server contains different item association generators which create business rules that define a relation between two items.

    Read more →
  • Web-based simulation

    Web-based simulation

    Web-based simulation (WBS) is the invocation of computer simulation services over the World Wide Web, specifically through a web browser. Increasingly, the web is being looked upon as an environment for providing modeling and simulation applications, and as such, is an emerging area of investigation within the simulation community. == Application == Web-based simulation is used in several contexts: In e-learning, various principles can quickly be illustrated to students by means of interactive computer animations, for example during lecture demonstrations and computer exercises. In distance learning, web-based simulation may provide an alternative to installing expensive simulation software on the student computer, or an alternative to expensive laboratory equipment. In software engineering, web-based emulation allows application development and testing on one platform for other target platforms, for example for various mobile operating systems or mobile web browsers, without the need of target hardware or locally installed emulation software. In online computer games, 3D environments can be simulated, and old home computers and video game consoles can be emulated, allowing the user to play old computer games in the web browser. In medical education, nurse education and allied health education (like sonographer training), web-based simulations can be used for learning and practicing clinical healthcare procedures. Web-based procedural simulations emphasize the cognitive elements such as the steps of the procedure, the decisions, the tools/devices to be used, and the correct anatomical location. == Client-side vs server-side approaches == Web-based simulation can take place either on the server side or on the client side. In server-side simulation, the numerical calculations and visualization (generation of plots and other computer graphics) is carried out on the web server, while the interactive graphical user interface (GUI) often partly is provided by the client-side, for example using server-side scripting such as PHP or CGI scripts, interactive services based on Ajax or a conventional application software remotely accessed through a VNC Java applet. In client-side simulation, the simulation program is downloaded from the server side but completely executed on the client side, for example using Java applets, Flash animations, JavaScript, or some mathematical software viewer plug-in. Server-side simulation is not scalable for many simultaneous users, but places fewer demands on the user computer performance and web-browser plug-ins than client-side simulation. The term on-line simulation sometimes refers to server-side web-based simulation, sometimes to symbiotic simulation, i.e. a simulation that interacts in real-time with a physical system. The upcoming cloud-computing technologies can be used for new server-side simulation approaches. For instance, there are multi-agent-simulation applications which are deployed on cloud-computing instances and act independently. This allows simulations to be highly scalable. == Existing tools == AgentSheets – graphically programmed tool for creating web-based The Sims-like simulation games, and for teaching beginner students programming. AnyLogic – a graphically programmed tool that generates Java code for discrete-event simulation, system dynamics and agent-based models Easy Java Simulations – a tool for modelling and visualization of physical phenomenons, that automatically generates Java code from mathematical expressions. ExploreLearning Gizmos – a large library of interactive online simulations for math and science education in grades 3–12. FreeFem++ Javascript Version – FreeFem++ is a free and open source PDE solver using the finite element method. GNU Octave web interfaces – MATLAB compatible open-source software Lanner Group Ltd L-SIM Server – Java-based discrete-event simulation engine which supports model standards such as BPMN 2.0 Nanohub – web 2.0 in-browser interactive simulation of nanotechnology NetLogo – a multi-agent programming language and integrated modeling environment that runs on the Java Virtual Machine OpenPlaG – PHP-based function graph plotter for the use on websites OpenEpi – web-based packet of tools for biostatistics Recursive Porous Agent Simulation Toolkit (Repast) – agent-based modeling and simulation toolkit implemented in Java and many other languages SageMath – open-source numerical-analysis software with web interface, based on the Python programming language SimScale – web-based simulation platform supporting computational fluid dynamics, solid mechanics, and thermodynamics StarLogo – agent-based simulation language written in Java. VisSim viewer – graphically programmed data-flow diagrams for simulation of dynamical systems webMathematica and Mathematica Player – a computer algebra system and programming language. VisualSim Architect – VisualSim Explorer enables system-level models to be embedded in documents for viewing, simulation and analysis from within a web browser without any local software installation.

    Read more →
  • StatCrunch

    StatCrunch

    StatCrunch is a web-based statistical software application from Pearson Education. StatCrunch was originally created for use in college statistics courses. As a full-featured statistics package, it is now also used for research and for other statistical analysis purposes. == History == American statistics professor Webster West created StatCrunch in 1997. Over the next 19 years West assisted by others added many more statistical procedures and graphing capabilities, and made user interface improvements. In 2005, West received two awards for StatCrunch: the CAUSEweb Resource of the Year Award and the MERLOT Classics Award. In 2013, the StatCrunch Java code was rewritten in JavaScript in order to avoid Java browser security problems, and so that it would run on iOS and Android. In 2015, new ways of importing data were added, including importing multi-page data directly from Wikipedia tables and other Web sources, and also importing with drag-and-drop for various data formats. In 2016, StatCrunch was acquired by Pearson Education, which had already been serving as the primary distributor of StatCrunch for several years. == Software == A StatCrunch license is included with many of Pearson's statistical textbooks. Because StatCrunch is a web application, it works on multiple platforms, including Windows, macOS, iOS, and Android. Data in StatCrunch is represented in a "data table" view, which is similar to a spreadsheet view, but unlike spreadsheets, the cells in a data table can only contain numbers or text. Formulas cannot be stored in these cells. There are many ways to import data into StatCrunch. Data can be typed directly into cells in the data table. Entire blocks of data may be cut-and-pasted into the data table. Text files (.csv, .txt, etc.) and Microsoft Excel files (.xls and .xlsx) can be drag-and-dropped into the data table. Data can be pulled into StatCrunch directly from Wikipedia tables or other Web tables, including multi-page tables. Data can be loaded directly from Google Drive and Dropbox. Shared data sets saved by other StatCrunch community users can be searched for by title or keyword and opened in a data table. Graphs, results, and reports created by StatCrunch can be shared with other users, in addition to the sharing of data sets. StatCrunch has a library of data transformation functions. StatCrunch can also recode and reorganize data. All data is stored in memory, and all processing happens on the client, so response is fast, even with large data sets. StatCrunch can interact with multiple graphs simultaneously. If a user selects a data point on one graph, then that same data point is highlighted on all other displayed graphs. In addition to standard statistical and graphing procedures, StatCrunch has a collection of about forty "applets" which illustrate statistical concepts interactively.

    Read more →
  • Couch to 5K

    Couch to 5K

    Couch to 5K, abbreviated C25K, is an exercise plan that gradually progresses from beginner running toward a 5 kilometre (3.1 mile) run over nine weeks. == Operations == The Couch to 5K running plan, also known as C25K, created by Josh Clark in 1996, was developed with the expectation of creating a plan for new runners to start running. The plan is aimed to have users work out for 20 to 30 minutes, three days a week. Within the program, users can be expected to perform different tasks such as intervals of running with period of short walks in between to help build endurance in the weeks up to the final goal of a 5K run. During the nine weeks leading up to the race, the runner will learn to set their own pace and where their strengths and weaknesses are within running. Often, the daily workouts start with a five-minute warm-up walk and works up to running five kilometres without a walking break within nine weeks. Users are not expected to have any experience in running and can be some of the first running that they ever do. The main goal is to turn that unexperienced runner into someone who can run a 5K. Clark started the website Kick and featured C25K on the site. In 2001, Kick merged with Cool Running, a New England–based running site. Clark later sold his stake in Cool Running and the Couch to 5K program. Cool Running was absorbed into Active.com, operated by Active Network, LLC. Active Network provides mobile apps for Couch to 5K, as well as 5K to 10K, a follow-up program. The NHS in the UK provides downloadable podcasts and a smartphone app (Android and iOS) for the plan. A mobile app, created by Zen Labs, has training plans that are based on the Couch to 5K running plan from CoolRunning.com. It is one of the highest-rated health and fitness apps available on Android and iOS. As of 2016, the C25K app has been used by over 5 million people.

    Read more →
  • TAChart

    TAChart

    TAChart is a component for the Lazarus IDE that provides charting services. Similar to Tchart and Teechart for Delphi it supports a collection of different chart types including bar charts, pie charts, line charts and point series. Apart from a screen canvas, output is possible in form of SVG, OpenGL, printer, WMF, and other formats. TAChart is bundled with the Lazarus Component Library. Although not intended to be a TChart clone, why its usage differs in certain points, its basic functionality is very similar and some source code written for TeeChart may be reused. == History == The first version of TAChart was developed by Philippe Martinole for the TeleAuto project, a program for automation of astronomic observations. Later functionality was introduced by Luis Rodrigues while porting the Epanet application from Delphi to Lazarus. In the ensuing years the code has extensively rewritten, expanded and is now maintained by Alexander Klenin. == Data sources == TAChart is able to use input from various sources. Examples include lists of real values, user defined buffers in the computer's memory, vectors of random values, fields in databases, calculated values provided by pre-defined functions and results of embedded code written in Pascal Script

    Read more →
  • Dimensions CM

    Dimensions CM

    Dimensions CM is a software change and configuration management product developed by OpenText Corporation. It includes revision control, change, build and release management capabilities. Since 2014 (v14.1) Dimensions CM includes PulseUno module providing Code review and Continuous integration capabilities. Starting with the version 14.5.2 (2020) it can also serve as a binary repository manager. == History == Previous product names: PCMS Dimensions (SQL Software) PVCS Dimensions (Merant, Intersolv)

    Read more →
  • Web application firewall

    Web application firewall

    A Web application firewall (WAF) is a specific form of application firewall that filters, monitors, and blocks HTTP traffic to and from a web service. By inspecting HTTP traffic, it can prevent attacks exploiting a Web application's known vulnerabilities, such as SQL injection, cross-site scripting (XSS), file inclusion, and improper system configuration. Financial institutions often utilize WAFs to help in the mitigation of Web application zero-day vulnerabilities, as well as hard-to-patch bugs or weaknesses through custom attack signature strings. == History == Dedicated Web application firewalls entered the market in the late 1990s during a time when web server attacks were becoming more prevalent. Early WAF products, from Kavado and Gilian technologies, tried to solve the increasing amount of attacks on Web applications in the late 1990s. In 2002, the open-source project ModSecurity was formed in order to make WAF technology more accessible. They finalized a core rule set for protecting Web applications, based on OASIS Web Application Security Technical Committee’s (WAS TC) vulnerability work. In 2003, they expanded and standardized rules through the Open Web Application Security Project’s (OWASP) Top 10 List, an annual ranking for Web security vulnerabilities. This list would become the industry standard for Web application security compliance. Since then, the market has continued to grow and evolve, especially focusing on credit card fraud prevention. With the development of the Payment Card Industry Data Security Standard (PCI DSS), a standardization of control over cardholder data, security has become more regulated in this sector. == Description == A Web application firewall is a special type of application firewall that applies specifically to Web applications. It is deployed in front of Web applications and analyzes bi-directional web-based (HTTP) traffic – detecting and blocking anything malicious. The OWASP provides a broad technical definition for a WAF as “a security solution on the Web application level which – from a technical point of view – does not depend on the application itself”. According to the PCI DSS Information Supplement for requirement 6.6, a WAF is defined as “a security policy enforcement point positioned between a Web application and the client endpoint. This functionality can be implemented in software or hardware, running in an appliance device, or in a typical server running a common operating system. It may be a stand-alone device or integrated into other network components.” In other words, a WAF can be a virtual or physical appliance that prevents vulnerabilities in Web applications from being exploited by outside threats. These vulnerabilities may be because the application itself is a legacy type or was insufficiently coded by design. The WAF addresses these code shortcomings by special configurations of rule-sets, also known as policies. Previously unknown vulnerabilities can be discovered through penetration testing or via a vulnerability scanner. A Web application vulnerability scanner, also known as a web application security scanner, is defined in the SAMATE NIST 500-269 as “an automated program that examines Web applications for potential security vulnerabilities. In addition to searching for Web application-specific vulnerabilities, the tools also look for software coding errors.” Resolving vulnerabilities is commonly referred to as remediation. Corrections to the code can be made in the application, but typically a more prompt response is necessary. In these situations, the application of a custom policy for a unique Web application vulnerability to provide a temporary but immediate fix (known as a virtual patch) may be necessary. WAFs are not an ultimate security solution, rather they are meant to be used in conjunction with other network perimeter security solutions such as network firewalls and intrusion prevention systems to provide a holistic defense strategy. WAFs typically follow a positive security model, a negative security, or a combination of both as mentioned by the SANS Institute. WAFs use a combination of rule-based logic, parsing, and signatures to detect and prevent attacks such as cross-site scripting and SQL injection. In general, features like browser emulation, obfuscation and virtualization, and IP obfuscation are used to attempt to bypass WAFs. The OWASP produces a list of the top ten Web application security flaws. All commercial WAF offerings cover these ten flaws at a minimum. There are non-commercial options as well. As mentioned earlier, the well-known open-source WAF engine called ModSecurity is one of these options. A WAF engine alone is insufficient to provide adequate protection, therefore OWASP along with Trustwave's Spiderlabs help organize and maintain a Core-Rule Set via GitHub to use with the ModSecurity WAF engine. == Deployment options == Although the names for operating mode may differ, WAFs are basically deployed inline in three different ways. According to NSS Labs, deployment options are transparent bridge, transparent reverse proxy, and reverse proxy. "Transparent" refers to the fact that the HTTP traffic is sent straight to the Web application, therefore the WAF is transparent between the client and server. This is in contrast to reverse proxy, where the WAF acts as a proxy, and the client’s traffic is sent directly to the WAF. The WAF then separately sends filtered traffic to Web applications. This can provide additional benefits such as IP masking but may introduce disadvantages such as performance latencies. == JA3 fingerprint == JA3, developed by Salesforce in 2017, is a technique for generating a unique fingerprint for SSL/TLS traffic based on specific fields in the handshake, such as the version, cipher suites, and extensions used by the client. This fingerprint enables the identification and tracking of clients based on the characteristics of their encrypted traffic. In the context of distributed denial of service (DDoS) protection, JA3 fingerprints are used to detect and differentiate malicious traffic, often associated with attack bots, from legitimate traffic, allowing for more precise filtering of potential threats. In September 2023, AWS WAF announced built-in support for JA3, enabling customers to inspect the JA3 fingerprints of incoming requests. JA3 was deprecated in May 2025 in favor of JA4. JA4 is currently patent pending.

    Read more →
  • Space-based data center

    Space-based data center

    Space-based data centers or orbital AI infrastructure are proposed concepts to build AI data centers in the sun-synchronous orbit or other orbits utilizing space-based solar power. Electric power has become the main bottleneck for terrestrial AI infrastructure. Space-based edge computing has historical roots in military architectures designed to bypass the latency of ground-based targeting networks. In the 1980s, the Strategic Defense Initiative's Brilliant Pebbles program first envisioned autonomous on-orbit data processing for missile defense. In 2019, the Space Development Agency (SDA) began to revive this decentralized approach through its Proliferated Warfighter Space Architecture (PWSA). This ambitious "sensor-to-shooter" infrastructure is treated as a prerequisite for the modern Golden Dome program, which would rely on space-based data processing to continuously track targets. == History == Early thinking about space-based computing infrastructure grew out of mid-20th-century visions for large orbital industrial systems, most notably proposals for space-based solar power, which were popularized in both technical literature and science writing by figures such as Isaac Asimov in the 1940s. These ideas emphasized exploiting the vacuum, continuous solar energy, and thermal characteristics of space to support power-intensive activities that would be difficult or inefficient on Earth. In the 21st century, advances in small satellites, reusable launch vehicles, and high-performance computing revived interest in space-based data centers, with governments and private companies exploring orbital or near-space platforms for edge computing, secure data handling, and low-latency processing of Earth-observation data. In September 2024, Y Combinator-backed Starcloud released a white paper detailing plans to build multiple gigawatts of AI compute in orbit. It was the first widely cited proposal to actually start building large orbital data centers. In 2025, Starcloud deployed an NVIDIA H100-class system and became the first company to train an LLM in space and run a version of Google Gemini in space. In March 2025, Lonestar deployed a data backup machine on the surface of the moon. In early January 2026, a team from the University of Pennsylvania presented a tether-based architecture for orbital data centers at the AIAA SciTech conference. The design relied on gravity gradient tension and solar-pressure-based passive attitude stabilization to minimize the mass of MW-scale orbital data centers. In January 2026, SpaceX filed plans with the Federal Communications Commission (FCC) for millions of satellites, leveraging reusable launches and Starlink integration to extend cloud and AI computing into orbit. Around the same time, Blue Origin announced the TeraWave constellation of about 5,400 satellites, designed to provide high‑throughput networking for data centers, enterprise, and government customers. Meanwhile, China announced a 200,000‑satellite constellation, focusing on state coordination, data sovereignty, and in-orbit processing for secure, time-critical applications. In February 2026, Starcloud submitted a proposal to the FCC for a constellation of up to 88,000 satellites for orbital data centers. In March, it announced intentions to be the first to mine Bitcoin in space, flying bitcoin mining ASICs on its second satellite, Starcloud-2. In May 2026, Edge Aerospace was awarded a contract by the European Space Agency under its Space Cloud program to study use cases, architectures and implementation roadmap for orbital data centers. == Feasibility == In October 2025, Nature Electronics published a study led by a research group at Nanyang Technological University on the development of carbon-neutral data centres in space. In November 2025, Google published a feasibility study on space-based data centers. The authors argued that if launch costs to low earth orbit reached US$200/kg, the launch cost for data center satellites could be cost effective relative to current energy costs for ground-based data centers. They project this may occur around 2035 if SpaceX's Starship project scales to 180 launches/year by then. == Advantages == Some sun-synchronous orbit (SSO) planes have constant sunlight in the dawn/dusk which could provide continuous solar energy. SSO is a limited resource and proper management and sharing of it is required. Solar irradiance is 36% higher in Earth orbit than on the surface No Earth weather storms or clouds, however more exposed to Solar storms. No property tax or land-use regulation. Saves space for other land use. Ample space for scalability. Won't strain the power grid. Direct access to power source without additional infrastructure. == Disadvantages == The deployment of space-based data centers raises several technical, economic, and environmental concerns. Existing launch costs are substantial and remains main cost of space infrastructure deployment Cooling is limited to heat dissipation through radiation only, which made in inefficient in comparison to convection in terrestrial data centers Space infrastructure must be designed to survive launch and to work under environment conditions of radiation, wide range of temperatures, in vacuum and in microgravity In-space assembly is on early development stage to enable deployment of mega-structures Megastructures are particularly exposed to orbital debris Solar arrays efficiency decrease 0.5% to 0.8% per year due to exposure of ultraviolet rays, space weather and orbital thermal cycles Hardware is designed for limited lifespan. Maintenance and repair in space (known as On-Orbit Servicing (OOS)) is still on early stage of practical implementation. Disposable data centre: technology obsolescence of AI data centre being a concern and difficult maintenance in space imply the single-use purpose of those space data centres. To extend lifetime, space infrastructure will require either refueling or orbit rasie by the servicer, which is going to increase its operational costs The environmental impact on Earth has its own challenges: The environmental impact of launches need to be addressed. Deployment consumes Earth resources that cannot be recovered or recycled. Computers require lots of resources, some of which are strategic. Recycling e-waste is already a challenge on Earth and extremely unlikely in space. Space debris (orbit pollution) is another sustainability challenge for space: Orbits are, like any resources, a limited physical and electromagnetic resource and available for all mankind. The accumulation of satellites on a particular orbit reduces the use of space for other purposes. A consequence of the increase of satellite in orbit is a higher risk of the runaway of space debris (see Kessler syndrome). This means some orbits could become unusable. Latency and bandwidth are constrained in space, and consumes limited electromagnetic resources. Satellite flares could inhibit ground-based and space-based observational astronomy. == Size and power generated == It would take ~1 square mile solar array in earth orbit to produce 1 gigawatt of power at 30% cell efficiency. == Companies pursuing space-based AI infrastructure == Blue Origin Cowboy Space Corporation (formerly Aetherflux) Edge Aerospace Google – Project Suncatcher Nvidia OpenAI SpaceX Starcloud

    Read more →
  • 24SevenOffice

    24SevenOffice

    24SevenOffice is a Norwegian software company headquartered in Oslo, Norway, with offices in Stockholm, Sweden and London, United Kingdom. Founded in 1997, the company specializes in web-based (SaaS) ERP and CRM systems. == Company history == 24SevenOffice was founded in 1997 in Porsgrunn, Norway, as IKT Interactive AS and marketed as kontorplassen.no. The name "24SevenOffice" was introduced for the company's London branch when the company entered the British market in 2003. The company changed its name to 24SevenOffice in February 2005. Originally based in Skien, the company later moved to Oslo Innovation Center, then to Tjuvholmen in the waterfront Fjord City of Oslo, and now the headquarters are located in Inkognitogaten 33, Solli plass, Oslo. The idea for the company's product was developed in 1996, and 24SevenOffice was an early innovator in the Scandinavian market in web-based enterprise resource planning solutions (ERP). A British office was established at Surrey Business Park in May 2003, with the company launching its web-based (SaaS) utility computing system to the UK SME market in 2004. An office in Chennai, India, was established in 2005, and 24SevenOffice entered the Swedish market when they acquired the leading competitor and ERP-provider Start & Run in a cash deal. In August 2005, the company had an initial public offering that raised NOK 15 million, and the company entered The Norwegian Over the Counter Market list as of 5 October 2005 (the ticker was 24SO), reaching a market value of NOK 175 million, with 5000 customers in Norway. In 2006, the company signed a deal to sponsor rally driver Petter Solberg, at the time the largest private sponsorship in Norwegian sport. Instead of receiving NOK 5 million in cash, Solberg received a 2.9 per cent ownership in the company. The company entered the German-speaking market in April 2006 when an office in Frankfurt am Main was opened. In late August/early September, they established an office with ten sales agents plus a general manager in Stockholm for the Swedish market. 24SevenOffice initiated strategic cooperation with Active 24 in early 2006 to develop a common platform. During the summer, Active 24 was bought by 24SevenOffice's ERP/CRM competitor Mamut (company), and 24SevenOffice terminated the contract with Active 24 in October demanding NOK 200 million in compensation for lost revenue. After a breakdown of settlement negotiations in the Forliksråd in January 2007, 24SevenOffice filed a case against Active 24 for breach of agreement in the Oslo District Court in March. 24SevenOffice lost on all counts in the District Court in December 2007. In January 2008, 24SevenOffice appealed the case to the Borgarting Court of Appeal, reducing the cause of action from NOK 250 to 30 million. 24SevenOffice lost on all counts in the Court of Appeal in December 2008, and was ordered to cover the costs incurred by Active 24 in connection with the dispute totaling NOK 6.91 million. 24SevenOffice appealed the case to the Supreme Court of Norway, but the Supreme Court Appeals Committee in March 2008 unanimously rejected the appeal from 24SevenOffice over the Borgarting Appeal Court's unanimous judgment of December 2008. On a counterclaim from Active 24 and Mamut against 24SevenOffice, the Oslo District Court in May 2010 found, that 24SevenOffice should pay Active 24 NOK 12 million in compensation for wrongfully having terminated the agreement, and a further NOK 360.000 of the opponent's legal costs. 24SevenOffice disagreed with the court ruling, and appealed once again. The Borgarting Court of Appeal in November 2011, ruled to reduce the amount of damages to NOK 4.4 million plus NOK 900.000 in penal interest. With several scrip issues, 24SevenOffice raised 25 million NOK (about $4 million at the time) between October 2005 and July 2006. They entered into a strategic partnership with Bluegarden, who for 30 years had delivered digital services for payroll, human resource planning, recruitment and training, in March 2006, and they made a large-scale agreement in April 2006, with US telecommunications software company Webex, a competitor to Norwegian Tandberg videoconferencing equipment manufacturer. In September 2006, 24SevenOffice signed an agreement with Fokus Bank to provide their customers with extended functionality in Internet banking. 24SevenOffice had by 2007 reportedly 9000 customers, joined the OpenAjax Alliance, and entered into a strategic partnership with Dun & Bradstreet in May 2007, but despite getting listed on Oslo Axess on 22 June (ticker: TFSO), reaching a market capitalization of NOK 120 million, the company was still losing money. The company ended 2007 with a revenue of NOK 21.7 million. In 2008, 24SevenOffice bought 50% of the stocks in telecommunication company Oyatel, partnered with Nets Group to facilitate invoicing for businesses, and telecommunications company Telipol chose 24SevenOffice's second-generation Internet platform for its 8,000 users. They announced an increase in revenues in Q2 to 11.1 million, up from 4.7 million in the same period the year before. 24SevenOffice had a turnover of NOK 37 million in the first half of 2009, a doubling compared to the same period the previous year, and presented its first positive EBITDA in Q2. The Norwegian Association of Auditors signed an agreement with 24SevenOffice in 2011, whereby they only recommend 24SevenOffice as a system for their members to use. On 27 June 2013, the shareholders of 24SevenOffice took off from the stock exchange and privatized the company. In recent years, the company has invested heavily in finance and accounting – and got leading auditing companies such as PwC and KPMG on the customer list. == Products == 24SevenOffice is a web-based (SaaS) ERP system. It includes modules for CRM, accounting, invoicing, e-mail, file/document management and project management. == Awards == 24SevenOffice won the Seal of Excellence in Multimedia Award at the 2004 CeBIT, became Norwegian Gazelle Company of the year 2004, chosen by Dagens Næringsliv and Dun & Bradstreet, won Product of the Year in the Norwegian finance magazine Kapital, and the IKT Grenland Innovation Award in 2008.

    Read more →
  • Webmail

    Webmail

    Webmail (or web-based email) is an email service that can be accessed using a standard web browser. It contrasts with email service accessible through a specialised email client software. Additionally, many internet service providers (ISP) provide webmail as part of their internet service package. Similarly, some web hosting providers also provide webmail as a part of their hosting package. As with any web application, webmail's main advantage over the use of a desktop email client is the ability to send and receive email anywhere from a web browser. == History == === Early implementations === The first Web Mail implementation was developed at CERN in 1993 by Phillip Hallam-Baker as a test of the HTTP protocol stack, but was not developed further. In the next two years, however, several people produced working webmail applications. In Europe, there were three implementations, Søren Vejrum's "WWW Mail", Luca Manunza's "WebMail", and Remy Wetzels' "WebMail". Søren Vejrum's "WWW Mail" was written when he was studying and working at the Copenhagen Business School in Denmark, and was released on February 28, 1995. Luca Manunza's "WebMail" was written while he was working at CRS4 in Sardinia, from an idea of Gianluigi Zanetti, with the first source release on March 30, 1995. Remy Wetzels' "WebMail" was written while he was studying at the Eindhoven University of Technology in the Netherlands for the DSE and was released early January 1995. In the United States, Matt Mankins wrote "Webex", and Bill Fitler, while at Lotus cc:Mail, began working on an implementation which he demonstrated publicly at Lotusphere on January 24, 1995. Customers who saw the cc:Mail demonstration were very enthusiastic, one recalling that they were "like an angry mob. People were yelling, 'We want this now!'". Matt Mankins, under the supervision of Dr. Burt Rosenberg at the University of Miami, released his "Webex" application source code in a post to comp.mail.misc on August 8, 1995, although it had been in use as the primary email application at the School of Architecture where Mankins worked for some months prior. Bill Fitler's webmail implementation was further developed as a commercial product, which Lotus announced and released in the fall of 1995 as cc:Mail for the World Wide Web 1.0; thereby providing an alternative means of accessing a cc:Mail message store (the usual means being a cc:Mail desktop application that operated either via dialup or within the confines of a local area network). Early commercialization of webmail was also achieved when "Webex" began to be sold by Mankins' company, DotShop, Inc., at the end of 1995. Within DotShop, "Webex" changed its name to "EMUmail"; which would be sold to companies like UPS and Rackspace until its sale to Accurev in 2001. EMUmail was one of the first applications to feature a free version that included embedded advertising, as well as a licensed version that did not. Hotmail and Four11's RocketMail both launched in 1996 as free services and immediately became very popular. === Widespread deployment === As the 1990s progressed, and into the 2000s, it became more common for the general public to have access to webmail because: many Internet service providers (such as EarthLink) and web hosting providers (such as Verio) began bundling webmail into their service offerings (often in parallel with POP/SMTP services); many other enterprises (such as universities and large corporations) also started offering webmail as a way for their user communities to access their email (either locally managed or outsourced); webmail service providers (such as Hotmail and RocketMail) emerged in 1996 as a free service to the general public, and rapidly gained in popularity. In some cases, webmail application software is developed in-house by the organizations running and managing the application, and in some cases it is obtained from software companies that develop and sell such applications, usually as part of an integrated mail server package (an early example being Netscape Messaging Server). The market for webmail application software has continued into the 2010s. == Rendering and compatibility == Email users may find the use of both a webmail client and a desktop client using the POP3 protocol presents some difficulties. For example, email messages that are downloaded by the desktop client and are removed from the server will no longer be available on the webmail client. The user is limited to previewing messages using the web client before they are downloaded by the desktop email client. However, one may choose to leave the emails on the server, in which case this problem does not occur. The use of both a webmail client and a desktop client using the IMAP4 protocol allows the contents of the mailbox to be consistently displayed in both the webmail and desktop clients and any action the user performs on messages in one interface will be reflected when the email is accessed via the other interface. There are significant differences in rendering capabilities for many popular webmail services such as Gmail, Outlook.com and Yahoo! Mail. Due to the varying treatment of HTML tags, such as