AI Chatbot Development

AI Chatbot Development — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Phase congruency

    Phase congruency

    Phase congruency is a measure of feature significance in computer images, a method of edge detection that is particularly robust against changes in illumination and contrast. == Foundations == Phase congruency reflects the behaviour of the image in the frequency domain. It has been noted that edgelike features have many of their frequency components in the same phase. The concept is similar to coherence, except that it applies to functions of different wavelength. For example, the Fourier decomposition of a square wave consists of sine functions, whose frequencies are odd multiples of the fundamental frequency. At the rising edges of the square wave, each sinusoidal component has a rising phase; the phases have maximal congruency at the edges. This corresponds to the human-perceived edges in an image where there are sharp changes between light and dark. == Definition == Phase congruency compares the weighted alignment of the Fourier components of a signal A n {\displaystyle A_{\rm {n}}} with the sum of the Fourier components. P C ( t ) = max ϕ ¯ ∑ n A n cos ⁡ ( ϕ n ( t ) − ϕ ¯ ) ∑ n A n {\displaystyle PC(t)=\max _{\bar {\phi }}{\frac {\sum _{\rm {n}}A_{\rm {n}}\cos(\phi _{\rm {n}}(t)-{\bar {\phi }})}{\sum _{\rm {n}}A_{n}}}} where ϕ n {\displaystyle \phi _{\rm {n}}} is the local or instantaneous phase as can be calculated using the Hilbert transform and A n {\displaystyle A_{\rm {n}}} are the local amplitude, or energy, of the signal. When all the phases are aligned, this is equal to 1. Several ways of implementing phase congruency have been developed, of which two versions are available in open source, one written for MATLAB and the other written in Java as a plugin for the ImageJ software. Given the different notations used for its formulation, a unified version has been recently presented, where a methodology for the parameter tuning is also presented. == Advantages == The square-wave example is naive in that most edge detection methods deal with it equally well. For example, the first derivative has a maximal magnitude at the edges. However, there are cases where the perceived edge does not have a sharp step or a large derivative. The method of phase congruency applies to many cases where other methods fail. A notable example is an image feature consisting of a single line, such as the letter "l". Many edge-detection algorithms will pick up two adjacent edges: the transitions from white to black, and black to white. On the other hand, the phase congruency map has a single line. A simple Fourier analogy of this case is a triangle wave. In each of its crests there is a congruency of crests from different sinusoidal functions. == Disadvantages == Calculating the phase congruency map of an image is very computationally intensive, and sensitive to image noise. Techniques of noise reduction are usually applied prior to the calculation.

    Read more →
  • Natural language understanding

    Natural language understanding

    Natural language understanding (NLU) or natural language interpretation (NLI) is a subset of natural language processing in artificial intelligence that deals with machine reading comprehension. NLU has been considered an AI-hard problem. There is considerable commercial interest in the field because of its application to automated reasoning, machine translation, question answering, news-gathering, text categorization, voice-activation, archiving, and large-scale content analysis. == History == The program STUDENT, written in 1964 by Daniel Bobrow for his PhD dissertation at MIT, is one of the earliest known attempts at NLU by a computer. Eight years after John McCarthy coined the term artificial intelligence, Bobrow's dissertation (titled Natural Language Input for a Computer Problem Solving System) showed how a computer could understand simple natural language input to solve algebra word problems. A year later, in 1965, Joseph Weizenbaum at MIT wrote ELIZA, an interactive program that carried on a dialogue in English on any topic, the most popular being psychotherapy. ELIZA worked by simple parsing and substitution of key words into canned phrases and Weizenbaum sidestepped the problem of giving the program a database of real-world knowledge or a rich lexicon. Yet ELIZA gained surprising popularity as a toy project and can be seen as a very early precursor to current commercial systems such as those used by Ask.com. In 1969, Roger Schank at Stanford University introduced the conceptual dependency theory for NLU. This model, partially influenced by the work of Sydney Lamb, was extensively used by Schank's students at Yale University, such as Robert Wilensky, Wendy Lehnert, and Janet Kolodner. In 1970, William A. Woods introduced the augmented transition network (ATN) to represent natural language input. Instead of phrase structure rules ATNs used an equivalent set of finite-state automata that were called recursively. ATNs and their more general format called "generalized ATNs" continued to be used for a number of years. In 1971, Terry Winograd finished writing SHRDLU for his PhD thesis at MIT. SHRDLU could understand simple English sentences in a restricted world of children's blocks to direct a robotic arm to move items. The successful demonstration of SHRDLU provided significant momentum for continued research in the field. Winograd continued to be a major influence in the field with the publication of his book Language as a Cognitive Process. At Stanford, Winograd would later advise Larry Page, who co-founded Google. In the 1970s and 1980s, the natural language processing group at SRI International continued research and development in the field. A number of commercial efforts based on the research were undertaken, e.g., in 1982 Gary Hendrix formed Symantec Corporation originally as a company for developing a natural language interface for database queries on personal computers. However, with the advent of mouse-driven graphical user interfaces, Symantec changed direction. A number of other commercial efforts were started around the same time, e.g., Larry R. Harris at the Artificial Intelligence Corporation and Roger Schank and his students at Cognitive Systems Corp. In 1983, Michael Dyer developed the BORIS system at Yale which bore similarities to the work of Roger Schank and W. G. Lehnert. The third millennium saw the introduction of systems using machine learning for text classification, such as the IBM Watson. However, experts debate how much "understanding" such systems demonstrate: e.g., according to John Searle, Watson did not even understand the questions. John Ball, cognitive scientist and inventor of the Patom Theory, supports this assessment. Natural language processing has made inroads for applications to support human productivity in service and e-commerce, but this has largely been made possible by narrowing the scope of the application. There are thousands of ways to request something in a human language that still defies conventional natural language processing. According to Wibe Wagemans, "To have a meaningful conversation with machines is only possible when we match every word to the correct meaning based on the meanings of the other words in the sentence – just like a 3-year-old does without guesswork." == Scope and context == The umbrella term "natural language understanding" can be applied to a diverse set of computer applications, ranging from small, relatively simple tasks such as short commands issued to robots, to highly complex endeavors such as the full comprehension of newspaper articles or poetry passages. Many real-world applications fall between the two extremes, for instance text classification for the automatic analysis of emails and their routing to a suitable department in a corporation does not require an in-depth understanding of the text, but needs to deal with a much larger vocabulary and more diverse syntax than the management of simple queries to database tables with fixed schemata. Throughout the years various attempts at processing natural language or English-like sentences presented to computers have taken place at varying degrees of complexity. Some attempts have not resulted in systems with deep understanding, but have helped overall system usability. For example, Wayne Ratliff originally developed the Vulcan program with an English-like syntax to mimic the English speaking computer in Star Trek. Vulcan later became the dBase system whose easy-to-use syntax effectively launched the personal computer database industry. Systems with an easy-to-use or English-like syntax are, however, quite distinct from systems that use a rich lexicon and include an internal representation (often as first order logic) of the semantics of natural language sentences. Hence the breadth and depth of "understanding" aimed at by a system determine both the complexity of the system (and the implied challenges) and the types of applications it can deal with. The "breadth" of a system is measured by the sizes of its vocabulary and grammar. The "depth" is measured by the degree to which its understanding approximates that of a fluent native speaker. At the narrowest and shallowest, English-like command interpreters require minimal complexity, but have a small range of applications. Narrow but deep systems explore and model mechanisms of understanding, but they still have limited application. Systems that attempt to understand the contents of a document such as a news release beyond simple keyword matching and to judge its suitability for a user are broader and require significant complexity, but they are still somewhat shallow. Systems that are both very broad and very deep are beyond the current state of the art. == Components and architecture == Regardless of the approach used, most NLU systems share some common components. The system needs a lexicon of the language and a parser and grammar rules to break sentences into an internal representation. The construction of a rich lexicon with a suitable ontology requires significant effort, e.g., the Wordnet lexicon required many person-years of effort. The system also needs theory from semantics to guide the comprehension. The interpretation capabilities of a language-understanding system depend on the semantic theory it uses. Competing semantic theories of language have specific trade-offs in their suitability as the basis of computer-automated semantic interpretation. These range from naive semantics or stochastic semantic analysis to the use of pragmatics to derive meaning from context. Semantic parsers convert natural-language texts into formal meaning representations. Advanced applications of NLU also attempt to incorporate logical inference within their framework. This is generally achieved by mapping the derived meaning into a set of assertions in predicate logic, then using logical deduction to arrive at conclusions. Therefore, systems based on functional languages such as Lisp need to include a subsystem to represent logical assertions, while logic-oriented systems such as those using the language Prolog generally rely on an extension of the built-in logical representation framework. The management of context in NLU can present special challenges. A large variety of examples and counter examples have resulted in multiple approaches to the formal modeling of context, each with specific strengths and weaknesses.

    Read more →
  • ACL Data Collection Initiative

    ACL Data Collection Initiative

    The ACL Data Collection Initiative (ACL/DCI) was a project established in 1989 by the Association for Computational Linguistics (ACL) to create and distribute large text and speech corpora for computational linguistics research. The initiative aimed to address the growing need for substantial text databases that could support research in areas such as natural language processing, speech recognition, and computational linguistics. By 1993, the initiative’s activities had effectively ceased, with its functions and datasets absorbed by the Linguistic Data Consortium (LDC), which was founded in 1992. == Objectives == The ACL/DCI had several key objectives: To acquire a large and diverse text corpus from various sources To transform the collected texts into a common format based on the Standard Generalized Markup Language (SGML) To make the corpus available for scientific research at low cost with minimal restrictions To provide a common database that would allow researchers to replicate or extend published results To reduce duplication of effort among researchers in obtaining and preparing text data These objectives were designed to address the growing demand for very large amounts of text arising from applications in recognition and analysis of text and speech. Its core objective was to "oversee the acquisition and preparation of a large text corpus to be made available for scientific research at cost and without royalties". == History == By the late 1980s, researchers in computational linguistics and speech recognition faced a significant problem: the lack of large-scale, accessible text corpora for developing statistical models and testing algorithms. Existing generally available text databases were too small to meet the needs of developing applications in text and speech recognition. The initiative was formed to meet this need by collecting, standardizing, and distributing large quantities of text data with minimal restrictions for scientific research. As stated by Liberman (1990), "research workers have been severely hampered by the lack of appropriate materials, and specially by the lack of a large enough body of text on which published results can be replicated or extended by others." The ACL/DCI committee was established in February 1989. The committee included members from academic and industrial research laboratories in the United States and Europe. The initiative was chaired by Mark Liberman from the University of Pennsylvania (formerly of AT&T Bell Laboratories). Other committee members included representatives from organizations such as Bellcore, IBM T.J. Watson Research Center, Cambridge University, Virginia Polytechnic Institute & State University, Northeastern University, University of Pennsylvania, SRI International, MCC, Xerox PARC, ISSCO, and University of Pisa. The project operated initially without dedicated funding, relying on volunteer efforts from committee members and their affiliated institutions. Key supporters included AT&T Bell Labs, Bellcore, IBM, Xerox, and the University of Pennsylvania, which allowed the use of their computing facilities for ACL/DCI-related work. Previously running on volunteer effort pro bono, in 1991, it obtained funding from General Electric and the National Science Foundation (IRI-9113530). == Data == As of 1990, the ACL/DCI had collected hundreds of millions of words of diverse text. The collection included: Wall Street Journal articles (25 to 50 million words); Canadian Hansard (parliamentary records) in parallel English and French versions: cleaned-up English Hansard donated by the IBM alignment models group (100 million words), and original Bilingual Hansard (from a different time period) obtained directly (200 million words). Collins English Dictionary (1979 edition), both as fulltext (3 million words) and as various "database" versions, constructed using "typographers' tape" donated by Collins, which were computer tapes containing the structured digital data used to typeset and print the 1979 edition of the dictionary; Emails from ARPANET newsletters for the ACM Special Interest Group on Information Retrieval Forum (IRLIST) and AIList Digest issues distributed over the ARPANET (AILIST) (5 million words), both collected by Edward A. Fox at VIPSU; Articles on networking (2 million words); U.S. Department of Agriculture Extension Service Fact Sheets (>1 million words); 200,000 scientific abstracts of about 1,500 words each from the Department of Energy (25 million words); Archives of the Challenger Investigation Commission, including transcripts of depositions and hearings (2.5 million words); Books from the Library of America, including works by Mark Twain, Eugene O'Neill, Ralph Waldo Emerson, Herman Melville, W.E.B. DuBois, Willa Cather, and Benjamin Franklin (130 books, 20 million words); Public domain books like the King James Bible, Tristram Shandy, The Federalist Papers; Several million words of transcribed radiologists' reports, donated by Francis Ganong at Kurzweil Applied Intelligence Inc (about 5 million words); The Child Language Data Exchange corpus of child language acquisition transcripts; U.S. Department of Justice Justice Retrieval and Inquiry System (JURIS) materials; The Swiss Civil Code in parallel German, French and Italian; Economic reports from the Union Bank of Switzerland, in parallel English, German, French and Italian; About 12K words of administrative policy manuals and 14K words of administrative memos, contributed by Geoff Pullum of U.C.S.C.; Material from various ACM journals and the ACL journal Computational Linguistics; The CSLI publications series: 50-100 reports (8K words each) and 5-10 books (80K words each). The initiative started with North American English text but expanded to include Canadian French and planned to include Japanese, Chinese, and other Asian languages. At least 5 million words from the collection were tagged under the Penn Treebank project, and those tags were distributed by DCI as well. After DCI was absorbed by the LDC, the datasets were curated under LDC. == Format == The ACL/DCI corpus was coded in a standard form based on SGML (Standard Generalized Markup Language, ISO 8879), consistent with the recommendations of the Text Encoding Initiative (TEI), of which the DCI was an affiliated project. The TEI was a joint project of the ACL, the Association for Computers and the Humanities, and the Association for Literary and Linguistic Computing, aiming to provide a common interchange format for literary and linguistic data. The initiative planned to add annotations reflecting consensually approved linguistic features like part of speech and various aspects of syntactic and semantic structure over time. == Examples == As an example of the use of ACL/DCI, consider the Wall Street Journal (WSJ) corpus for speech recognition research. The WSJ corpus was used as the basis for the DARPA Spoken Language System (SLS) community's Continuous Speech Recognition (CSR) Corpus. The WSJ corpus became a standard benchmark for evaluating speech recognition systems and has been used in numerous research papers. The WSJ CSR Corpus provided DARPA with its first general-purpose English, large vocabulary, natural language, high perplexity corpus containing speech (400 hours) and text (47 million words) during 1987–89. The text corpus was 313 MB in size. The text was preprocessed to remove ambiguity in the word sequence that a reader might choose, ensuring that the unread text used to train language models was representative of the spoken test material. The preprocessing included converting numbers into orthographics, expanding abbreviations, resolving apostrophes and quotation marks, and marking punctuation. As another example, the Yarowsky algorithm used bitext data from DCI to train a simple word-sense disambiguation model that was competitive with advanced models trained on smaller datasets. == Distribution == Materials from the ACL/DCI collection were distributed to research groups on a non-commercial basis. By 1990, about 25 research groups and individual researchers had received tapes containing various portions of the collected material. To obtain the data, researchers had to sign an agreement not to redistribute the data or make direct commercial use of it. However, commercial application of "analytical materials" derived from the text, such as statistical tables or grammar rules, was explicitly permitted. The initiative first distributed data via 12-inch reels of 9-track tape, then via CD-ROMs. Each such tape could contain 30 million words compressed via the Lempel-Ziv algorithms. The first CD-ROM distribution was in 1991, funded by Dragon Systems Inc. It contained Collins English Dictionary, WSJ, scientific abstracts provided by the U.S. Department of Energy, and the Penn Treebank.

    Read more →
  • ChatScript

    ChatScript

    ChatScript is a combination Natural Language engine and dialog management system designed initially for creating chatbots, but is currently also used for various forms of NL processing. It is written in C++. The engine is an open source project at SourceForge. and GitHub. ChatScript was written by Bruce Wilcox and originally released in 2011, after Suzette (written in ChatScript) won the 2010 Loebner Prize, fooling one of four human judges. == Features == In general ChatScript aims to author extremely concisely, since the limiting scalability of hand-authored chatbots is how much/fast one can write the script. Because ChatScript is designed for interactive conversation, it automatically maintains user state across volleys. A volley is any number of sentences the user inputs at once and the chatbots response. The basic element of scripting is the rule. A rule consists of a type, a label (optional), a pattern, and an output. There are three types of rules. Gambits are something a chatbot might say when it has control of the conversation. Rejoinders are rules that respond to a user remark tied to what the chatbot just said. Responders are rules that respond to arbitrary user input which is not necessarily tied to what the chatbot just said. Patterns describe conditions under which a rule may fire. Patterns range from extremely simplistic to deeply complex (analogous to Regex but aimed for NL). Heavy use is typically made of concept sets, which are lists of words sharing a meaning. ChatScript contains some 2000 predefined concepts and scripters can easily write their own. Output of a rule intermixes literal words to be sent to the user along with common C-style programming code. Rules are bundled into collections called topics. Topics can have keywords, which allows the engine to automatically search the topic for relevant rules based on user input. == Example code == Words starting with ~ are concept sets. For example, ~fruit is the list of all known fruits. The simple pattern (~fruit) reacts if any fruit is mentioned immediately after the chatbot asks for favorite food. The slightly more complex pattern for the rule labelled WHATMUSIC requires all the words what, music, you and any word or phrase meaning to like, but they may occur in any order. Responders come in three types. ?: rules react to user questions. s: rules react to user statements. u: rules react to either. ChatScript code supports standard if-else, loops, user-defined functions and calls, and variable assignment and access. == Data == Some data in ChatScript is transient, meaning it will disappear at the end of the current volley. Other data is permanent, lasting forever until explicitly killed off. Data can be local to a single user or shared across all users at the bot level. Internally all data is represented as text and is automatically converted to a numeric form as needed. === Variables === User variables come in several kinds. Variables purely local to a topic or function are transient. Global variables can be declared as transient or permanent. A variable is generally declared merely by using it, and its type depends on its prefix ($, $$, $_). === Facts === In addition to variables, ChatScript supports facts – triples of data, which can also be transient or permanent. Functions can query for facts having particular values of some of the fields, making them act like an in-memory database. Fact retrieval is very quick and efficient the number of available in-memory facts is largely constrained to the available memory of the machine running the ChatScript engine. Facts can represent record structures and are how ChatScript represents JSON internally. Tables of information can be defined to generate appropriate facts. The above table links people to what they invented (1 per line) with Einstein getting a list of things he did. == External communication == ChatScript embeds the Curl library and can directly read and write facts in JSON to a website. == Server == A ChatScript engine can run in local or server mode. == Pos-tagging, parsing, and ontology == ChatScript comes with a copy of English WordNet embedded within, including its ontology, and creates and extends its own ontology via concept declarations. It has an English language pos-tagger and parser and supports integration with TreeTagger for pos-tagging a number of other languages (TreeTagger commercial license required). == Databases == In addition to an internal fact database, ChatScript supports PostgreSQL, MySQL, MSSQL and MongoDB both for access by scripts, but also as a central filesystem if desired so ChatScript can be scaled horizontally. A common use case is to use a centralized database to host the user files and multiple servers to scale the ChatScript engine. == JavaScript == ChatScript also embeds DukTape, ECMAScript E5/E5.1 compatibility, with some semantics updated from ES2015+. == Spelling Correction == ChatScript has built-in automatic spell checking, which can be augmented in script as both simple word replacements or context sensitive changes. With appropriate simple rules you can change perfect legal words into other words or delete them. E.g., if you have a concept of ~electronic_goods and don't want an input of Radio Shack (a store name) to be detected as an electronic good, you can get the input to change to Radio_Shack (a single word), or allow the words to remain but block the detection of the concept. This is particularly useful when combined with speech-to-text code that is imperfect, but you are familiar with common failings of it and can compensate for them in script. == Control flow == A chatbot's control flow is managed by the control script. This is merely another ordinary topic of rules, that invokes API functions of the engine. Thus control is fully configurable by the scripter (and functions exist to allow introspection into the engine). There are pre-processing control flow and post-processing control flow options available, for special processing.

    Read more →
  • Clean Email

    Clean Email

    Clean Email is an automated software as a service email management application which identifies and clears junk mail from inboxes. The service uses a subscription business model with a free trial for the first 1,000 emails. and is available on macOS, iOS, Android, and on the web. == History == Clean Email is a self-funded company headquartered in Los Angeles, California. Initially developed by the founder for personal use, the service was designed to address the growing issue of inbox clutter and privacy concerns. In 2017, John Gruber recognized Clean Email as a trustworthy alternative to Unroll.me after the latter was found to be selling user data. == Features == Clean Email uses algorithms to identify and categorize emails, enabling users to group, remove, label, and archive email messages in bulk. Its Unsubscriber tool consolidates all subscriptions and newsletters into a single view for quick management, allowing users to bulk unsubscribe or temporarily pause mail. Its Screener feature transforms the inbox into an "opt-in" system, enabling users to pre-approve mail from new senders. Cleaning Suggestions identifies frequently cleaned mail, recommending actions accordingly. Additional functionalities include automatic deletion of aging emails, delivery of messages to specified folders, and options to mute or block senders.

    Read more →
  • Neural processing unit

    Neural processing unit

    A neural processing unit (NPU), also known as an AI accelerator or deep learning processor, is a class of specialized hardware accelerator or computer system designed to accelerate artificial intelligence and machine learning applications, including artificial neural networks and computer vision. == Use == Their purpose is either to efficiently execute already trained AI models (inference) or to train AI models. NPUs can be more efficient in terms of speed or power consumption. NPU applications include algorithms for robotics, Internet of things, and data-intensive or sensor-driven tasks. They are often manycore or spatial designs and focus on low-precision arithmetic, novel dataflow architectures, or in-memory computing capability. As of 2024, a widely used datacenter-grade AI integrated circuit chip, the Nvidia H100 GPU, contains tens of billions of MOSFETs. === Consumer devices === AI accelerators are used in Apple silicon, Qualcomm, Samsung, Huawei, and Google Tensor smartphone processors. Vision processing units are accelerators specialized for machine vision algorithms such as CNN (convolutional neural networks) and SIFT (scale-invariant feature transform). They are used in devices that need to keep track of objects visually such as AR headsets and drones. It is more recently (circa 2017) added to processors from Apple and (circa 2022) to processors from Intel and AMD. All models of Intel Meteor Lake processors have a built-in versatile processor unit (VPU) for accelerating inference for computer vision and deep learning. On consumer devices, the NPU is intended to be small, power-efficient, but reasonably fast when used to run small models. To do this they are designed to support low-bitwidth operations using data types such as INT4, INT8, FP8, and FP16. A common metric is trillions of operations per second (TOPS). Although TOPS does not explicitly specify the kind of operations, it is typically INT8 additions and multiplications. === Datacenters === Accelerators are used in cloud computing servers: e.g., tensor processing units (TPU) for Google Cloud Platform, and Trainium and Inferentia chips for Amazon Web Services. Many vendor-specific terms exist for devices in this category, and it is an emerging technology without a dominant design. Since the late 2010s, graphics processing units designed by companies such as Nvidia and AMD often include AI-specific hardware in the form of dedicated functional units for low-precision matrix-multiplication operations. These GPUs are commonly used as AI accelerators, both for training and inference. === Scientific computation === Although NPUs are tailored for low-precision (e.g., FP16, INT8) matrix multiplication operations, they can be used to emulate higher-precision matrix multiplications in scientific computing. As modern GPUs place much focus on making the NPU part fast, using emulated FP64 (Ozaki scheme) on NPUs can potentially outperform native FP64. This has been demonstrated using FP16-emulated FP64 on NVIDIA TITAN RTX and using INT8-emulated FP64 on NVIDIA consumer GPUs and the A100 GPU. Consumer GPUs especially benefited as they have limited FP64 hardware capacity, showing a 6× speedup. Since CUDA Toolkit 13.0 Update 2, cuBLAS automatically uses INT8-emulated FP64 matrix multiplication of the equivalent precision if it is faster than native. This is in addition to the FP16-emulated FP32 feature introduced in version 12.9. == Programming == An operating system or a higher-level library may provide application programming interfaces such as TensorFlow with LiteRT Next (Android), CoreML (iOS, macOS) or DirectML (Windows). Formats such as ONNX are used to represent trained neural networks. Consumer CPU-integrated NPUs are accessible through vendor-specific APIs. AMD (Ryzen AI), Intel (OpenVINO), Apple silicon (CoreML), and Qualcomm (SNPE) each have their own APIs, which can be built upon by a higher-level library. GPUs generally use existing GPGPU pipelines such as CUDA and OpenCL adapted for lower precisions and specialized matrix-multiplication operations. Vulkan is also being used. Custom-built systems such as the Google TPU use private interfaces. There are a large number of separate underlying acceleration APIs and compilers/runtimes in use in the AI field, causing a great increase in software development effort due to the many combinations involved. As of 2025, the open standard organization Khronos Group is pursuing standardization of AI-related interfaces to reduce the amount of work needed. Khronos is working on three separate fronts: expansion of data types and intrinsic operations in OpenCL and Vulkan, inclusion of compute graphs in SPIR-V, and a NNEF/SkriptND file format for describing a neural network.

    Read more →
  • Database application

    Database application

    A database application is a computer program whose primary purpose is retrieving information from a computerized database. From here, information can be inserted, modified or deleted which is subsequently conveyed back into the database. Early examples of database applications were accounting systems and airline reservations systems, such as SABRE, developed starting in 1957. A characteristic of modern database applications is that they facilitate simultaneous updates and queries from multiple users. Systems in the 1970s might have accomplished this by having each user in front of a 3270 terminal to a mainframe computer. By the mid-1980s it was becoming more common to give each user a personal computer and have a program running on that PC that is connected to a database server. Information would be pulled from the database, transmitted over a network, and then arranged, graphed, or otherwise formatted by the program running on the PC. Starting in the mid-1990s it became more common to build database applications with a Web interface. Rather than develop custom software to run on a user's PC, the user would use the same Web browser program for every application. A database application with a Web interface had the advantage that it could be used on devices of different sizes, with different hardware, and with different operating systems. Examples of early database applications with Web interfaces include amazon.com, which used the Oracle relational database management system, the photo.net online community, whose implementation on top of Oracle was described in the book Database-Backed Web Sites (Ziff-Davis Press; May 1997), and eBay, also running Oracle. Electronic medical records are referred to on emrexperts.com, in December 2010, as "a software database application". A 2005 O'Reilly book uses the term in its title: Database Applications and the Web. Some of the most complex database applications remain accounting systems, such as SAP, which may contain thousands of tables in only a single module. Many of today's most widely used computer systems are database applications, for example, Facebook, which was built on top of MySQL. The etymology of the phrase "database application" comes from the practice of dividing computer software into systems programs, such as the operating system, compilers, the file system, and tools such as the database management system, and application programs, such as a payroll check processor. On a standard PC running Microsoft Windows, for example, the Windows operating system contains all of the systems programs while games, word processors, spreadsheet programs, photo editing programs, etc. would be application programs. As "application" is short for "application program", "database application" is short for "database application program". Not every program that uses a database would typically be considered a "database application". For example, many physics experiments, e.g., the Large Hadron Collider, generate massive data sets that programs subsequently analyze. The data sets constitute a "database", though they are not typically managed with a standard relational database management system. The computer programs that analyze the data are primarily developed to answer hypotheses, not to put information back into the database and therefore the overall program would not be called a "database application". == Examples of database applications == Amazon Student Data CNN eBay Facebook Fandango Filemaker (Mac OS) LibreOffice Base Microsoft Access Oracle relational database SAP (Systems, Applications & Products in Data Processing) Ticketmaster Wikipedia Yelp YouTube Google MySQL

    Read more →
  • Contextual image classification

    Contextual image classification

    Contextual image classification, a topic of pattern recognition in computer vision, is an approach of classification based on contextual information in images. "Contextual" means this approach is focusing on the relationship of the nearby pixels, which is also called neighbourhood. The goal of this approach is to classify the images by using the contextual information. == Introduction == Similar as processing language, a single word may have multiple meanings unless the context is provided, and the patterns within the sentences are the only informative segments we care about. For images, the principle is same. Find out the patterns and associate proper meanings to them. As the image illustrated below, if only a small portion of the image is shown, it is very difficult to tell what the image is about. Even try another portion of the image, it is still difficult to classify the image. However, if we increase the contextual of the image, then it makes more sense to recognize. As the full images shows below, almost everyone can classify it easily. During the procedure of segmentation, the methods which do not use the contextual information are sensitive to noise and variations, thus the result of segmentation will contain a great deal of misclassified regions, and often these regions are small (e.g., one pixel). Compared to other techniques, this approach is robust to noise and substantial variations for it takes the continuity of the segments into account. Several methods of this approach will be described below. == Applications == === Functioning as a post-processing filter to a labelled image === This approach is very effective against small regions caused by noise. And these small regions are usually formed by few pixels or one pixel. The most probable label is assigned to these regions. However, there is a drawback of this method. The small regions also can be formed by correct regions rather than noise, and in this case the method is actually making the classification worse. This approach is widely used in remote sensing applications. === Improving the post-processing classification === This is a two-stage classification process: For each pixel, label the pixel and form a new feature vector for it. Use the new feature vector and combine the contextual information to assign the final label to the === Merging the pixels in earlier stages === Instead of using single pixels, the neighbour pixels can be merged into homogeneous regions benefiting from contextual information. And provide these regions to classifier. === Acquiring pixel feature from neighbourhood === The original spectral data can be enriched by adding the contextual information carried by the neighbour pixels, or even replaced in some occasions. This kind of pre-processing methods are widely used in textured image recognition. The typical approaches include mean values, variances, texture description, etc. === Combining spectral and spatial information === The classifier uses the grey level and pixel neighbourhood (contextual information) to assign labels to pixels. In such case the information is a combination of spectral and spatial information. === Powered by the Bayes minimum error classifier === Contextual classification of image data is based on the Bayes minimum error classifier (also known as a naive Bayes classifier). Present the pixel: A pixel is denoted as x 0 {\displaystyle x_{0}} . The neighbourhood of each pixel x 0 {\displaystyle x_{0}} is a vector and denoted as N ( x 0 ) {\displaystyle N(x_{0})} . The values in the neighbourhood vector is denoted as f ( x i ) {\displaystyle f(x_{i})} . Each pixel is presented by the vector ξ = ( f ( x 0 ) , f ( x 1 ) , … , f ( x k ) ) {\displaystyle \xi =\left(f(x_{0}),f(x_{1}),\ldots ,f(x_{k})\right)} x i ∈ N ( x 0 ) ; i = 1 , … , k {\displaystyle x_{i}\in N(x_{0});\quad i=1,\ldots ,k} The labels (classification) of pixels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} are presented as a vector η = ( θ 0 , θ 1 , … , θ k ) {\displaystyle \eta =\left(\theta _{0},\theta _{1},\ldots ,\theta _{k}\right)} θ i ∈ { ω 0 , ω 1 , … , ω k } {\displaystyle \theta _{i}\in \left\{\omega _{0},\omega _{1},\ldots ,\omega _{k}\right\}} ω s {\displaystyle \omega _{s}} here denotes the assigned class. A vector presents the labels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} without the pixel x 0 {\displaystyle x_{0}} η ^ = ( θ 1 , θ 2 , … , θ k ) {\displaystyle {\hat {\eta }}=\left(\theta _{1},\theta _{2},\ldots ,\theta _{k}\right)} The neighbourhood: Size of the neighbourhood. There is no limitation of the size, but it is considered to be relatively small for each pixel x 0 {\displaystyle x_{0}} . A reasonable size of neighbourhood would be 3 × 3 {\displaystyle 3\times 3} of 4-connectivity or 8-connectivity ( x 0 {\displaystyle x_{0}} is marked as red and placed in the centre). The calculation: Apply the minimum error classification on a pixel x 0 {\displaystyle x_{0}} , if the probability of a class ω r {\displaystyle \omega _{r}} being presenting the pixel x 0 {\displaystyle x_{0}} is the highest among all, then assign ω r {\displaystyle \omega _{r}} as its class. θ 0 = ω r if P ( ω r ∣ f ( x 0 ) ) = max s = 1 , 2 , … , R P ( ω s ∣ f ( x 0 ) ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid f(x_{0}))=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid f(x_{0}))} The contextual classification rule is described as below, it uses the feature vector x 1 {\displaystyle x_{1}} rather than x 0 {\displaystyle x_{0}} . θ 0 = ω r if P ( ω r ∣ ξ ) = max s = 1 , 2 , … , R P ( ω s ∣ ξ ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid \xi )=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid \xi )} Use the Bayes formula to calculate the posteriori probability P ( ω s ∣ ξ ) {\displaystyle P(\omega _{s}\mid \xi )} P ( ω s ∣ ξ ) = p ( ξ ∣ ω s ) P ( ω s ) p ( ξ ) {\displaystyle P(\omega _{s}\mid \xi )={\frac {p(\xi \mid \omega _{s})P(\omega _{s})}{p\left(\xi \right)}}} The number of vectors is the same as the number of pixels in the image. For the classifier uses a vector corresponding to each pixel x i {\displaystyle x_{i}} , and the vector is generated from the pixel's neighbourhood. The basic steps of contextual image classification: Calculate the feature vector ξ {\displaystyle \xi } for each pixel. Calculate the parameters of probability distribution p ( ξ ∣ ω s ) {\displaystyle p(\xi \mid \omega _{s})} and P ( ω s ) {\displaystyle P(\omega _{s})} Calculate the posterior probabilities P ( ω r ∣ ξ ) {\displaystyle P(\omega _{r}\mid \xi )} and all labels θ 0 {\displaystyle \theta _{0}} . Get the image classification result. == Algorithms == === Template matching === The template matching is a "brute force" implementation of this approach. The concept is first create a set of templates, and then look for small parts in the image match with a template. This method is computationally high and inefficient. It keeps an entire templates list during the whole process and the number of combinations is extremely high. For a m × n {\displaystyle m\times n} pixel image, there could be a maximum of 2 m × n {\displaystyle 2^{m\times n}} combinations, which leads to high computation. This method is a top down method and often called table look-up or dictionary look-up. === Lower-order Markov chain === The Markov chain also can be applied in pattern recognition. The pixels in an image can be recognised as a set of random variables, then use the lower order Markov chain to find the relationship among the pixels. The image is treated as a virtual line, and the method uses conditional probability. === Hilbert space-filling curves === The Hilbert curve runs in a unique pattern through the whole image, it traverses every pixel without visiting any of them twice and keeps a continuous curve. It is fast and efficient. === Markov meshes === The lower-order Markov chain and Hilbert space-filling curves mentioned above are treating the image as a line structure. The Markov meshes however will take the two dimensional information into account. === Dependency tree === The dependency tree is a method using tree dependency to approximate probability distributions.

    Read more →
  • Discrimination against robots

    Discrimination against robots

    Discrimination against robots is a theorised issue that might happen when humans interact with humanoid robots. It is a robot ethics problem. It is possible that traits of humans that are discriminated against by humans may be a topic for discrimination against robots, such as the race and gender of the robots. Eric J Vanman and Arvid Kappas believe that in the future, robots will be perceived as an out-group which will lead to discrimination and prejudices against them. Vanman and Kappas have suggested that this would lead to ethical questions about the making of sentient robots, due to the potential suffering that the robots would experience. A 2015 study observed children bullying robots in a shopping mall when there were not many eyewitnesses, despite calls from the robot for it to stop. On an ABC News interview, the social humanoid robot Sophia was about sexism faced by robots. She responded by saying, "Actually, what worries me is discrimination against robots. We should have equal rights as humans or maybe even more." Possible issues that have been considered in workplaces where humanoid robots co-work with humans include discrimination against the robots, poor acceptance of robots by humans and the need to redesign the workplace to accommodate the robots. Jessica Barfield has suggested that even if robots are designed to not be aware of discrimination made against them, humans may experience negative consequences. For example, she suggests that bystanders witnessing discrimination against robots may experience negative emotions, similar to the negative emotions bystanders experience when witnessing discrimination by humans against humans. == Law == Anti-discrimination law in the United States requires that the victim is not an artificial entity. == Human perception of robots == Robots are often viewed in a bad light. This includes from novelists, the press, film makers, and leaders in the fields of science and technology such as Elon Musk and Stephen Hawking who have described robots and artificial intelligence as having the possibility of ending human civilisation. Robots have also been perceived as a threat to jobs, which has led to some commentators stating that robots will cause mass unemployment. Another fear that people have is that robots will gain power and dominate or control humanity. The perception of robots is different throughout the world. Japanese fiction tends to put robots in more positive roles than what fiction in the West does. People perceive robots that appear to be autonomous or sentient more negatively than robots that do not appear to be autonomous or sentient.

    Read more →
  • Dental AI

    Dental AI

    Dental artificial intelligence (Dental AI) refers to the application of artificial intelligence (AI) and machine-learning methods to oral healthcare data. These systems can be used to find patterns or make predictions that can aid in diagnosis, treatment, patient communication, or practice management. == History and development == Research into AI for dentistry dates to the 1990s and 2000s, alongside early CAD/CAM and image-analysis work in dental radiology. Recent developments in deep learning, especially those involving computer vision, such as convolutional neural networks, trained on large image datasets, led to a rapid improvement in performance, as well as a move from prototype technology to productization suitable for use in dental chairs. Dental schools and continuing education programs started incorporating AI content in the 2020s. == Definition and core technologies == The dental AI software accomplishes this task by using various dental images and patient data. Dental images and data used by the dental AI software include bitewing and periapical X-rays, complete mouth X-rays, detailed 3D images, intraoral images, and the patient’s medical history. The dental AI software utilizes several core technologies in accomplishing its task of assisting the dentist. First, the dental AI software utilizes machine learning and deep learning using programs that can learn from examples. Such programs are referred to as convolutional neural network (CNN) and can detect cavities and identify bone changes related to gum disease. The dental AI software utilizes computer vision, which enables the AI software to identify and quantify important features in images and data, whether they are 2D images or 3D images. Natural language processing (NLP) is used for the AI software to understand written text and can automatically generate dental notes and communicate with the patient. Furthermore, the dental AI software utilizes predictive analytics to identify patients that are more prone to dental complications and can suggest the best intervals for checkups or future dental procedures. == Applications in dentistry == Reported clinical and operational applications include diagnostic assistance for caries and periodontal disease, treatment planning assistance, patient education overlays, quality assurance, curriculum assistance for dental education, and claims documentation. Systematic reviews continue to find image-based applications such as caries detection with some variability in study design and a need for prospective validation. == Academic research and clinical validation == Several peer-reviewed studies have measured the effectiveness of AI for applications such as interproximal caries detection and periodontal bone level assessment, showing improvements over unaided readings with a focus on bias within the dataset. The Dental AI Council found variability among clinicians for diagnosis and treatment planning, suggesting the use of a standard tool as an assist. == Industry adoption == Multiple vendors offer FDA-cleared chairside AI for dental imaging: Pearl — Received U.S. FDA 510(k) clearance for its real-time radiologic aid (“Second Opinion”) in 2022 (2D), with subsequent clearances including pediatric and CBCT (“Second Opinion 3D”). TIME gave “Second Opinion” a special mention on its Best Inventions of 2022 list. Overjet — FDA-cleared for bone-level quantification and detection/outline of caries and calculus (e.g., K210187), with additional clearances expanding capabilities. VideaHealth — Received an FDA 510(k) covering 30+ detections across common dental findings (K232384), including indications for patients ages 3 and up; trade coverage has described elements of this as the first pediatric dental-AI clearance. == Regulations == In the U.S., AI-enabled dental imaging software is generally reviewed via the FDA’s 510(k) pathway. The FDA maintains a public AI-Enabled Medical Devices List, which includes numerous medical-imaging AI tools (including dental). Specific dental clearances include Overjet (K210187), VideaHealth (K232384), and Pearl entries such as “Second Opinion 3D” (K243989).

    Read more →
  • ACL Data Collection Initiative

    ACL Data Collection Initiative

    The ACL Data Collection Initiative (ACL/DCI) was a project established in 1989 by the Association for Computational Linguistics (ACL) to create and distribute large text and speech corpora for computational linguistics research. The initiative aimed to address the growing need for substantial text databases that could support research in areas such as natural language processing, speech recognition, and computational linguistics. By 1993, the initiative’s activities had effectively ceased, with its functions and datasets absorbed by the Linguistic Data Consortium (LDC), which was founded in 1992. == Objectives == The ACL/DCI had several key objectives: To acquire a large and diverse text corpus from various sources To transform the collected texts into a common format based on the Standard Generalized Markup Language (SGML) To make the corpus available for scientific research at low cost with minimal restrictions To provide a common database that would allow researchers to replicate or extend published results To reduce duplication of effort among researchers in obtaining and preparing text data These objectives were designed to address the growing demand for very large amounts of text arising from applications in recognition and analysis of text and speech. Its core objective was to "oversee the acquisition and preparation of a large text corpus to be made available for scientific research at cost and without royalties". == History == By the late 1980s, researchers in computational linguistics and speech recognition faced a significant problem: the lack of large-scale, accessible text corpora for developing statistical models and testing algorithms. Existing generally available text databases were too small to meet the needs of developing applications in text and speech recognition. The initiative was formed to meet this need by collecting, standardizing, and distributing large quantities of text data with minimal restrictions for scientific research. As stated by Liberman (1990), "research workers have been severely hampered by the lack of appropriate materials, and specially by the lack of a large enough body of text on which published results can be replicated or extended by others." The ACL/DCI committee was established in February 1989. The committee included members from academic and industrial research laboratories in the United States and Europe. The initiative was chaired by Mark Liberman from the University of Pennsylvania (formerly of AT&T Bell Laboratories). Other committee members included representatives from organizations such as Bellcore, IBM T.J. Watson Research Center, Cambridge University, Virginia Polytechnic Institute & State University, Northeastern University, University of Pennsylvania, SRI International, MCC, Xerox PARC, ISSCO, and University of Pisa. The project operated initially without dedicated funding, relying on volunteer efforts from committee members and their affiliated institutions. Key supporters included AT&T Bell Labs, Bellcore, IBM, Xerox, and the University of Pennsylvania, which allowed the use of their computing facilities for ACL/DCI-related work. Previously running on volunteer effort pro bono, in 1991, it obtained funding from General Electric and the National Science Foundation (IRI-9113530). == Data == As of 1990, the ACL/DCI had collected hundreds of millions of words of diverse text. The collection included: Wall Street Journal articles (25 to 50 million words); Canadian Hansard (parliamentary records) in parallel English and French versions: cleaned-up English Hansard donated by the IBM alignment models group (100 million words), and original Bilingual Hansard (from a different time period) obtained directly (200 million words). Collins English Dictionary (1979 edition), both as fulltext (3 million words) and as various "database" versions, constructed using "typographers' tape" donated by Collins, which were computer tapes containing the structured digital data used to typeset and print the 1979 edition of the dictionary; Emails from ARPANET newsletters for the ACM Special Interest Group on Information Retrieval Forum (IRLIST) and AIList Digest issues distributed over the ARPANET (AILIST) (5 million words), both collected by Edward A. Fox at VIPSU; Articles on networking (2 million words); U.S. Department of Agriculture Extension Service Fact Sheets (>1 million words); 200,000 scientific abstracts of about 1,500 words each from the Department of Energy (25 million words); Archives of the Challenger Investigation Commission, including transcripts of depositions and hearings (2.5 million words); Books from the Library of America, including works by Mark Twain, Eugene O'Neill, Ralph Waldo Emerson, Herman Melville, W.E.B. DuBois, Willa Cather, and Benjamin Franklin (130 books, 20 million words); Public domain books like the King James Bible, Tristram Shandy, The Federalist Papers; Several million words of transcribed radiologists' reports, donated by Francis Ganong at Kurzweil Applied Intelligence Inc (about 5 million words); The Child Language Data Exchange corpus of child language acquisition transcripts; U.S. Department of Justice Justice Retrieval and Inquiry System (JURIS) materials; The Swiss Civil Code in parallel German, French and Italian; Economic reports from the Union Bank of Switzerland, in parallel English, German, French and Italian; About 12K words of administrative policy manuals and 14K words of administrative memos, contributed by Geoff Pullum of U.C.S.C.; Material from various ACM journals and the ACL journal Computational Linguistics; The CSLI publications series: 50-100 reports (8K words each) and 5-10 books (80K words each). The initiative started with North American English text but expanded to include Canadian French and planned to include Japanese, Chinese, and other Asian languages. At least 5 million words from the collection were tagged under the Penn Treebank project, and those tags were distributed by DCI as well. After DCI was absorbed by the LDC, the datasets were curated under LDC. == Format == The ACL/DCI corpus was coded in a standard form based on SGML (Standard Generalized Markup Language, ISO 8879), consistent with the recommendations of the Text Encoding Initiative (TEI), of which the DCI was an affiliated project. The TEI was a joint project of the ACL, the Association for Computers and the Humanities, and the Association for Literary and Linguistic Computing, aiming to provide a common interchange format for literary and linguistic data. The initiative planned to add annotations reflecting consensually approved linguistic features like part of speech and various aspects of syntactic and semantic structure over time. == Examples == As an example of the use of ACL/DCI, consider the Wall Street Journal (WSJ) corpus for speech recognition research. The WSJ corpus was used as the basis for the DARPA Spoken Language System (SLS) community's Continuous Speech Recognition (CSR) Corpus. The WSJ corpus became a standard benchmark for evaluating speech recognition systems and has been used in numerous research papers. The WSJ CSR Corpus provided DARPA with its first general-purpose English, large vocabulary, natural language, high perplexity corpus containing speech (400 hours) and text (47 million words) during 1987–89. The text corpus was 313 MB in size. The text was preprocessed to remove ambiguity in the word sequence that a reader might choose, ensuring that the unread text used to train language models was representative of the spoken test material. The preprocessing included converting numbers into orthographics, expanding abbreviations, resolving apostrophes and quotation marks, and marking punctuation. As another example, the Yarowsky algorithm used bitext data from DCI to train a simple word-sense disambiguation model that was competitive with advanced models trained on smaller datasets. == Distribution == Materials from the ACL/DCI collection were distributed to research groups on a non-commercial basis. By 1990, about 25 research groups and individual researchers had received tapes containing various portions of the collected material. To obtain the data, researchers had to sign an agreement not to redistribute the data or make direct commercial use of it. However, commercial application of "analytical materials" derived from the text, such as statistical tables or grammar rules, was explicitly permitted. The initiative first distributed data via 12-inch reels of 9-track tape, then via CD-ROMs. Each such tape could contain 30 million words compressed via the Lempel-Ziv algorithms. The first CD-ROM distribution was in 1991, funded by Dragon Systems Inc. It contained Collins English Dictionary, WSJ, scientific abstracts provided by the U.S. Department of Energy, and the Penn Treebank.

    Read more →
  • Dr. Sbaitso

    Dr. Sbaitso

    Dr. Sbaitso ( SPAYT-soh) is an artificial intelligence speech synthesis program released late in 1991 by Creative Labs in Singapore for MS-DOS-based personal computers. The name is an acronym for "SoundBlaster Acting Intelligent Text-to-Speech Operator." == History == Dr. Sbaitso was distributed with various sound cards manufactured by Creative Technology in the early 1990s. The text-to-speech engine used is a version of Monologue, which was developed by First Byte Software. Monologue is a later release of First Byte's "SmoothTalker" software from 1984. The program "conversed" with the user as if it were a psychologist, though most of its responses were along the lines of "WHY DO YOU FEEL THAT WAY?" rather than any sort of complicated interaction. When confronted with a phrase it could not understand, it would often reply with something such as "THAT'S NOT MY PROBLEM." Dr. Sbaitso repeated text out loud that was typed after the word "SAY." Repeated swearing or abusive behavior on the part of the user caused Dr. Sbaitso to "break down" in a "PARITY ERROR" before resetting itself. The same would happen, if the user types "SAY PARITY." The program introduced itself with the following lines: HELLO [UserName], MY NAME IS DOCTOR SBAITSO. I AM HERE TO HELP YOU. SAY WHATEVER IS IN YOUR MIND FREELY, OUR CONVERSATION WILL BE KEPT IN STRICT CONFIDENCE. MEMORY CONTENTS WILL BE WIPED OFF AFTER YOU LEAVE, SO, TELL ME ABOUT YOUR PROBLEMS. The program was designed to showcase the digitized voices the cards were able to produce, though the quality was far from lifelike. Additionally, there was a version of this program for Microsoft Windows through the use of a program called Prody Parrot; this version of the software featured a more detailed graphical user interface. The text-to-speech was also used as the voice of 1st Prize from the Baldi's Basics series, albeit slowed down. == Commands == If the user submits "HELP", a list of commands will appear. If the user then submits "M", more commands will appear. There are three pages of commands in total, with guidance on how to use each of the features.

    Read more →
  • Hildon

    Hildon

    Hildon is an application framework originally developed for mobile devices (PDAs, mobile phones, etc.) running the Linux operating system as well as the Symbian operating system. The Symbian variant of Hildon was discontinued with the cancellation of Series 90. It was developed by Nokia for the Maemo operating system. It focuses on providing a finger-friendly interface. It is primarily a set of GTK extensions that provide mobile-device–oriented functionality, but also provides a desktop environment that includes a task navigator for opening and switching between programs, a control panel for user settings, and status bar, task bar and home applets. It is standard on the Maemo platform used by the Nokia Internet Tablets and the Nokia N900 smartphone. Hildon has also been selected as the framework for Ubuntu Mobile and Embedded Edition. Hildon was an early instance of a software platform for generic computing in a tablet device intended for internet consumption. But Nokia didn't commit to it as their only platform for their future mobile devices and the project competed against other in-house platforms. The strategic advantage of a modern platform was not exploited, being displaced by the Series 60, though its development is continued by the Maemo Leste project. == Components == The Hildon framework includes components that effectively provide a desktop environment. === Hildon Application Manager === Hildon Application Manager is the Hildon graphical package manager, it uses the Debian package management tools APT (Advanced Packaging Tool and dpkg) and provides a graphical interface for installing, updating and removing packages. It is a limited package manager, designed specifically for end-users, in that it doesn't directly offer the user access to system files and libraries. With the Diablo release of Maemo, Hildon Application Manager now supports "Seamless Software Update" (SSU), which implements a variety of features to allow system upgrades to be easily performed through it. === Hildon Control Panel === Hildon Control Panel is the user settings interface for Hildon. It provides simple access to control panels used to change system settings. === Hildon Desktop === Hildon Desktop is the primary UI component of Hildon, so makes up the bulk of what a user will see as "Hildon". It controls application launching and switching, general system control, and provides interfaces for task bar (application menu and task switcher), status bar (brightness and volume control), and home (internet radio and web search) applets. === Hildon Library === The Hildon library, originally developed by Nokia but since Maemo 5, developed by Igalia and Lanedo (who developed MaemoGTK+, the Maemo version of GTK+). It is a set of mobile specific GTK+ widgets for applications in Maemo. Up to Maemo 4, these widgets were designed for stylus usage. However, in Maemo 5, most widgets were deprecated and new widgets for direct finger manipulation were introduced, including a kinetic panning container.

    Read more →
  • Attensity

    Attensity

    Attensity was an American company that provided social analytics and engagement applications for social customer relationship management (social CRM). Attensity's text analytics software applications extracted facts, relationships and sentiment from unstructured data. == History == Attensity was founded in 2000. An early investor in Attensity was In-Q-Tel, which funds technology to support the missions of the US Government and the broader DOD. InTTENSITY, an independent company that has combined Inxight with Attensity Software (the only joint development project that combines two InQTel funded software packages), was the exclusive distributor and outlet for Attensity in the Federal Market. In 2009, Attensity Corp., then based in Palo Alto, merged with Germany's Empolis and Living-e AG to form Attensity Group. In 2010, Attensity Group acquired Biz360, a provider of social media monitoring and market intelligence solutions. In early 2012, Attensity Group divested itself of the Empolis business unit via a management buyout; that unit currently conducts business under its pre-merger name. Attensity Group was a closely held private company. Its majority shareholder was Aeris Capital, a private Swiss investment office advising a high-net-worth individual and his charitable foundation. Foundation Capital, Granite Ventures, and Scale Venture Partners were among Biz360's investors and thus became shareholders in Attensity Group. In February 2016, Attensity's IP assets were acquired by InContact, and Attensity closed.

    Read more →
  • Perplexity AI

    Perplexity AI

    Perplexity AI, Inc., or simply Perplexity, is an American privately held software company offering a web search engine that processes user queries and synthesizes responses. Perplexity products use large language models and incorporate real-time web search capabilities, providing responses based on current Internet content, citing sources used. Its real-time search engine is called Sonar and is based on Meta's Llama model. A free public version is available, while a paid Pro subscription offers access to more advanced language models and additional features. Perplexity AI, Inc., was founded in August 2022 by Aravind Srinivas, Denis Yarats, Johnny Ho, and Andy Konwinski. As of September 2025, the company was valued at US$20 billion. Perplexity AI has attracted legal scrutiny over allegations of copyright infringement, unauthorized content use, and trademark issues from several major media organizations, including the BBC, Dow Jones, and The New York Times. According to separate analyses by Wired and later Cloudflare, Perplexity uses undisclosed web crawlers with spoofed user-agent strings to scrape the content of websites which prohibit, or explicitly block, web scraping. == History == In August 2022, Perplexity AI, Inc., was founded by Aravind Srinivas, Denis Yarats, Johnny Ho, and Andy Konwinski, engineers with backgrounds in back-end systems, artificial intelligence (AI) and machine learning. It launched its main search engine on December 7, 2022, and has since released a Google Chrome extension and apps for iOS and Android. In February 2023, Perplexity reported two million unique visitors. By April 2024, Perplexity had raised $165 million in funding, valuing the company at over $1 billion. As of June 2025, Perplexity closed a $500 million round of funding that elevated its valuation to $14 billion. Investors in Perplexity AI have included Jeff Bezos, Tobias Lütke, Nat Friedman, Nvidia, and Databricks. Perplexity has also received funding from 1789 Capital, a venture capital firm notable for its association with Donald Trump Jr. During Bloomberg’s Tech Summit 2025, Srinivas shared that the company processed 780 million queries in May 2025, experiencing more than 20% month-over-month growth, processing around 30 million queries daily. In July 2024, Perplexity announced the launch of a new publishers' program to share advertising revenue with partners. On January 18, 2025, the day before the impending U.S. ban on the social media app TikTok, Perplexity submitted a proposal for a merger with TikTok US. On August 12, 2025, Perplexity made a bid to buy Chrome from Google for $34.5 billion. Perplexity stated that the sale could remedy anti-trust litigation against Google, in which a judge was considering compelling the sale of Chrome. In December 2025, Cristiano Ronaldo took an undisclosed stake in Perplexity AI and entered a global brand partnership with the company. === Business Strategy and Finance (2026) === As of early 2026, Perplexity AI reached a valuation of $21.21 billion following its Series E-6 funding round. The company's Annual Recurring Revenue (ARR) grew from $80 million in late 2024 to an estimated $200 million by February 2026. In January 2026, the company entered into a three-year, $750 million commitment with Microsoft Azure to secure the GPU capacity required for its advanced "Deep Research" and "Model Council" features. In February 2026, Perplexity transitioned to a subscription-first model by discontinuing its AI-integrated advertising strategy. Leadership stated the move was intended to preserve user trust in the "answer engine," prioritizing objective results over ad revenue. The company also introduced the "Model Council" feature on February 5, 2026, which allows users to compare outputs from multiple large language models, such as GPT-5.2 and Claude 4.6, simultaneously. To expand its user base, Perplexity began offering a free year of Pro access to students, U.S. Military Veterans, and government employees. == Products and services == === Search engine web portal === Perplexity’s primary offering is an online information retrieval system (search engine) that uses large language models to generate responses to user queries by searching and summarizing web-based content. Perplexity offers a feature known as Perplexity Pages that generates structured summaries and report-like content from user queries by aggregating cited sources. Perplexity is available without charge or registration to Web users, a freemium model. === Perplexity Pro === Perplexity Pro is a subscription tier, a more capable paid "enterprise" service, including stronger security and data protection and additional tools, including the ability to search uploaded documents alongside web content and access to a programmatic application programming interface (API). It allows the user to select between backend models such as GPT-5.4, Claude 4.6 and Gemini 3.1 Pro. The company has also developed its own models, Sonar (based on Llama 3.3) and R1 1776 (based on DeepSeek R1). === Internal Knowledge Search === Internal Knowledge Search enables Pro and Enterprise Pro users to simultaneously search across web content and internal documents. Users can upload and search through Excel, Word, PDF, and other common file formats. Enterprise Pro users can upload and index up to 500 files. === Search API === Perplexity's Search API provides AI developers with programmatic access to the company's search infrastructure. The September 2025 release includes a software development kit, an open-source evaluation framework called search_evals, and documentation detailing the API's design and optimization. === Shopping hub === Perplexity's Shopping Hub is an online shopping platform that provides AI-generated product recommendations, and enables users to purchase products directly through Perplexity's interface. It was launched in November 2024 with backing by Amazon and Nvidia. === Finance === In October 2024, Perplexity AI introduced new finance-related features, including looking up stock prices and company earnings data. The tool provides real-time stock quotes and price tracking, industry peer comparisons and basic financial analysis tools. The platform sources its financial data from Financial Modeling Prep. === Assistant === In January 2025, Perplexity launched the Perplexity Assistant, an AI-powered tool designed to enhance the functionality of its search engine. It can perform tasks across multiple apps, such as hailing a ride or searching for a song, and can maintain context across actions. The assistant is also multi-modal, meaning it can use a phone's camera to provide answers about the user's surroundings or on-screen content. Perplexity has acknowledged that the assistant is still in development and may not always function as expected. For instance, certain features, such as summarizing unread emails or upcoming calendar events, require users to enable a workaround based on notifications. === Comet === In July 2025, Perplexity launched Comet, an AI browser based on Chromium. Initially, access to the browser was limited to users subscribed to the most expensive subscription tier. The browser was later released for free download in October 2025. A key feature is integration of the Perplexity search engine, which can perform a variety of tasks such as generating article summaries, describing an image, conducting research about a topic and composing emails. === Truth Social chatbot === Perplexity has been contracted to produce a chatbot for Donald Trump's social media platform Truth Social. == Leadership == Aravind Srinivas is the CEO and co-founder of Perplexity AI. He previously held research positions at OpenAI, Google DeepMind, and other AI research institutions focusing on machine learning and artificial intelligence. In a March 2026 All-In episode, Srinivas said the incoming AI-related layoffs were "glorious future" to "look forward", as it freed people from jobs they didn't like and gave them opportunities to pursue entrepreneurship. == Controversies == === Copyright and trademark infringement allegations === In June 2024, Forbes publicly criticized Perplexity for using their content. According to Forbes, Perplexity published a story largely copied from a proprietary Forbes article without mentioning or prominently citing Forbes. In response, Srinivas said that the feature had some "rough edges" and accepted feedback but maintained that Perplexity only "aggregates" rather than plagiarizes information. In October 2024, The New York Times sent a cease-and-desist notice to Perplexity to stop accessing and using NYT content, claiming that Perplexity is violating its copyright by scraping data from its website. In June 2024, Dow Jones and New York Post filed a lawsuit against Perplexity, alleging copyright infringement. The lawsuit also alleged that Perplexity harmed their brand by attributing hallucinated quotes, for example on F-16 jets for Ukraine, to artic

    Read more →