AI Chatbot Development

AI Chatbot Development — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Accelerated Linear Algebra

  XLA (Accelerated Linear Algebra) is an open-source compiler for machine learning developed by the OpenXLA project. XLA is designed to improve the performance of machine learning models by optimizing the computation graphs at a lower level, making it particularly useful for large-scale computations and high-performance machine learning models. Key features of XLA include: Compilation of Computation Graphs: Compiles computation graphs into efficient machine code. Optimization Techniques: Applies operation fusion, memory optimization, and other techniques. Hardware Support: Optimizes models for various hardware, including CPUs, GPUs, and NPUs. Improved Model Execution Time: Aims to reduce machine learning models' execution time for both training and inference. Seamless Integration: Can be used with existing machine learning code with minimal changes. XLA represents a significant step in optimizing machine learning models, providing developers with tools to enhance computational efficiency and performance. == OpenXLA Project == OpenXLA Project is an open-source machine learning compiler and infrastructure initiative intended to provide a common set of tools for compiling and deploying machine learning models across different frameworks and hardware platforms. It provides a modular compilation stack that can be used by major deep learning frameworks like JAX, PyTorch, and TensorFlow. The project focuses on supplying shared components for optimization, portability, and execution across CPUs, GPUs, and specialized accelerators. Its design emphasizes interoperability between frameworks and a standardized set of representations for model computation. == Components == The OpenXLA ecosystem includes several core components: XLA – A deep learning compiler that optimizes computational graphs for multiple hardware targets. PJRT – A runtime interface that allows different back-ends to connect to XLA through a consistent API. StableHLO – A high-level operator set intended to serve as a stable, portable representation for ML models across compilers and frameworks. Shardy – An MLIR-based system for describing and transforming models that run in distributed or multi-device environments. Additional profiling, testing, and integration tools maintained under the OpenXLA organization. == Users and adopters == Several machine learning frameworks can use or interoperate with OpenXLA components, including JAX, TensorFlow, and parts of the PyTorch ecosystem. The project is developed with participation from multiple hardware and software organizations that contribute back-end integrations, testing, or specifications for their devices. This includes Alibaba, Amazon Web Services, AMD, Anyscale, Apple, Arm, Cerebras, Google, Graphcore, Hugging Face, Intel, Meta, NVIDIA and SiFive. == Supported target devices == x86-64 ARM64 NVIDIA GPU AMD GPU Intel GPU Apple GPU Google TPU AWS Trainium, Inferentia Cerebras Graphcore IPU == Governance == OpenXLA is developed as a community project with its work carried out in public repositories, discussion forums, and design meetings. Some components, such as StableHLO, began with stewardship from specific organizations and have outlined plans for more formal and distributed governance models as the project matures. == History == The project was announced in 2022 as an effort to coordinate development of ML compiler technologies across major AI companies, notably: Alibaba, Amazon Web Services, AMD, Anyscale, Apple, Arm, Cerebras, Google, Graphcore, Hugging Face, Intel, Meta, NVIDIA and SiFive.. It consolidated the XLA compiler, introduced StableHLO as a portable operator set, and created a unified structure for additional tools. Development continues within multiple repositories under the OpenXLA umbrella. It was founded by Eugene Burmako, James Rubin, Magnus Hyttsten, Mehdi Amini, Navid Khajouei, and Thea Lamkin from Google's Machine Learning organization.

  Read more →
• 

  Hashtag

  A hashtag is a metadata tag operator that is prefaced by the hash symbol, #. On social media, hashtags are used on microblogging and photo-sharing services–especially Twitter and Tumblr–as a form of user-generated tagging that enables cross-referencing of content by topic or theme. For example, a search within Instagram for the hashtag #flowers returns all posts that have been tagged with that term. After the initial hash symbol, a hashtag may include letters, numerals or other punctuation. The use of hashtags was first proposed by American blogger and product consultant Chris Messina in a 2007 tweet. Messina made no attempt to patent the use because he felt that "they were born of the internet, and owned by no one". Hashtags became entrenched in the culture of Twitter and soon emerged across Instagram, Facebook, and YouTube. In June 2014, hashtag was added to the Oxford English Dictionary as "a word or phrase with the symbol # in front of it, used on social media websites and apps so that you can search for all messages with the same subject". == Origin and acceptance == The number sign or hash symbol, #, has long been used in information technology to highlight specific pieces of text. In 1970, the number sign was used to denote immediate address mode in the assembly language of the PDP-11 when placed next to a symbol or a number, and around 1973, '#' was introduced in the C programming language to indicate special keywords that the C preprocessor had to process first. The pound sign was adopted for use within IRC (Internet Relay Chat) networks around 1988 to label groups and topics. Channels or topics that are available across an entire IRC network are prefixed with a hash symbol # (as opposed to those local to a server, which uses an ampersand '&'). The use of the pound sign in IRC inspired Chris Messina to propose a similar system on Twitter to tag topics of interest on the microblogging network. He proposed the usage of hashtags on Twitter: How do you feel about using # (pound) for groups. As in #barcamp [msg]? According to Messina, he suggested use of the hashtag to make it easy for lay users without specialized knowledge of search protocols to find specific relevant content. Therefore, the hashtag "was created organically by Twitter users as a way to categorize messages". The first published use of the term "hash tag" was in a blog post "Hash Tags = Twitter Groupings" by Stowe Boyd, on August 26, 2007, according to lexicographer Ben Zimmer, chair of the American Dialect Society's New Words Committee. Messina's suggestion to use the hashtag was not immediately adopted by Twitter, but the convention gained popular acceptance when hashtags were used in tweets relating to the 2007 San Diego forest fires in Southern California. The hashtag gained international acceptance during the 2009–2010 Iranian election protests; Twitter users used both English- and Persian-language hashtags in communications during the events. Hashtags have since played critical roles in recent social movements such as #jesuischarlie, #BLM, and #MeToo. Beginning July 2, 2009, Twitter began to hyperlink all hashtags in tweets to Twitter search results for the hashtagged word (and for the standard spelling of commonly misspelled words). In 2010, Twitter introduced "Trending Topics" on the Twitter front page, displaying hashtags that are rapidly becoming popular, and the significance of trending hashtags has become so great that the company makes significant efforts to foil attempts to spam the trending list. During the 2010 World Cup, Twitter explicitly encouraged the use of hashtags with the temporary deployment of "hashflags", which replaced hashtags of three-letter country codes with their respective national flags. Other platforms such as YouTube and Gawker Media followed in officially supporting hashtags, and real-time search aggregators such as Google Real-Time Search began supporting hashtags. == Format == A hashtag must begin with a hash (#) character followed by other characters, and is terminated by a space or the end of the line. Some platforms may require the # to be preceded with a space. Most or all platforms that support hashtags permit the inclusion of letters (without diacritics), numerals, and underscores. Other characters may be supported on a platform-by-platform basis. Some characters, such as "&", are generally not supported as they may already serve other search functions. Hashtags are not case sensitive (a search for "#hashtag" will match "#HashTag" as well), but the use of embedded capitals (i.e., CamelCase) increases legibility and improves accessibility. Languages that do not use word dividers handle hashtags differently. In China, microblogs Sina Weibo and Tencent Weibo use a double-hashtag-delimited #HashName# format, since the lack of spacing between Chinese characters necessitates a closing tag. Twitter uses a different syntax for Chinese characters and orthographies with similar spacing conventions: the hashtag contains unspaced characters, separated from preceding and following text by spaces (e.g., '我 #爱 你' instead of '我#爱你') or by zero-width non-joiner characters before and after the hashtagged element, to retain a linguistically natural appearance (displaying as unspaced '我‌#爱‌你', but with invisible non-joiners delimiting the hashtag). === Etiquette and regulation === Some communities may limit, officially or unofficially, the number of hashtags permitted on a single post. Misuse of hashtags can lead to account suspensions. Twitter warns that adding hashtags to unrelated tweets, or repeated use of the same hashtag without adding to a conversation can filter an account from search results, or suspend the account. Individual platforms may deactivate certain hashtags either for being too generic to be useful, such as #photography on Instagram, or due to their use to facilitate illegal activities. === Alternate formats === In 2009, StockTwits began using ticker symbols preceded by the dollar sign (e.g., $XRX). In July 2012, Twitter began supporting the tag convention and dubbed it the "cashtag". The convention has extended to national currencies, and Cash App has implemented the cashtag to mark usernames. == Function == Hashtags are particularly useful in unmoderated forums that lack a formal ontological organization. Hashtags help users find content similar interest. Hashtags are neither registered nor controlled by any one user or group of users. They do not contain any set definitions, meaning that a single hashtag can be used for any number of purposes, and that the accepted meaning of a hashtag can change with time. Hashtags intended for discussion of a particular event tend to use an obscure wording to avoid being caught up with generic conversations on similar subjects, such as a cake festival using #cakefestival rather than simply #cake. However, this can also make it difficult for topics to become "trending topics" because people often use different spelling or words to refer to the same topic. For topics to trend, there must be a consensus, whether silent or stated, that the hashtag refers to that specific topic. Hashtags may be used informally to express context around a given message, with no intent to categorize the message for later searching, sharing, or other reasons. Hashtags may thus serve as a reflexive meta-commentary. This can help express contextual cues or offer more depth to the information or message that appears with the hashtag. "My arms are getting darker by the minute. #toomuchfaketan". AnoHashtags can also be used to express personal feelings and emotions. ther function of the hashtag can be used to express personal feelings and emotions. For example, with "It's Monday!! #excited #sarcasm" in which the adjectives are directly indicating the emotions of the speaker. Verbal use of the word hashtag is sometimes used in informal conversations. Use may be humorous, such as "I'm hashtag confused!" By August 2012, use of a hand gesture, sometimes called the "finger hashtag", in which the index and middle finger both hands are extended and arranged perpendicularly to form the hash, was documented. === Co-optation by other industries === Companies, businesses, and advocacy organizations have taken advantage of hashtag-based discussions for promotion of their products, services or campaigns. In the early 2010s, some television broadcasters began to employ hashtags related to programs in digital on-screen graphics, to encourage viewers to participate in a backchannel of discussion via social media prior to, during, or after the program. Television commercials have sometimes contained hashtags for similar purposes. The increased usage of hashtags as brand promotion devices has been compared to the promotion of branded "keywords" by AOL in the late 1990s and early 2000s, as such keywords were also promoted at the end of television commercials and series episodes. Organized real-world events have used hashta

  Read more →
• 

  Haul video

  A haul video is a video recording posted to the Internet in which a person discusses items that they recently purchased, sometimes going into detail about their experiences during the purchase and the cost of the items they bought. The posting of haul videos (or hauls) was a growing trend between 2008 and 2016. Often the items bought are books, clothing, groceries, household goods, makeup, or jewellery. == Details == The posting of haul videos grew as a trend between 2008 and 2016. By late 2010, nearly a quarter of a million haul videos had been shared on the website YouTube alone. Certain videos have each received tens of millions of views. Many young adults (mostly women) have displayed their shopping hauls, while including their beauty and design commentary in the narration. The videos are often grouped by store name or by the type of product (cosmetics, accessories, shoes, postage stamps, etc.). Before haul videos became an online trend, millions of people spent time watching other people, in technical product videos unbox their latest new gadgets and technology. The trend of "unboxing videos" had emerged during 2006. Haul videos have led to celebrity status for some people. Other haul video bloggers have entered sponsorship deals and advertising programs from major brands. The videos are rarely negative about the products being reviewed. This aspect of the genre of haul videos makes sponsorship by brand advertisers particularly appealing. Brands including J.C. Penney contacted haulers as part of their marketing efforts for Back to School 2010. Haul videos also convinced three San Francisco Bay Area area natives to launch HaulBlog–a parody site that creates fake haul videos which poke fun at the phenomenon. The site is also home to the original monthly web series "The Haul Monitor" a humorous commentary show that features haul videos from around the community. == Fashion media == Sarah Sykes and John Zimmerman of Carnegie Mellon University, HCII and School of Design wrote an article "Making Sense of Haul Videos: Self-created Celebrities Fill a Fashion Media Gap". They discuss their analysis and research project examining what makes video bloggers so popular on YouTube, as well as how it affects fashion media through the production of haul videos. == Federal Trade Commission == The United States Federal Trade Commission recently enacted laws to regulate many types of online publishers and content creators. The posted information includes blogging and podcasting in text, images, audio, and video. While any publishers (including the haul-video creators) are allowed to accept free merchandise and advertising, the gifts or payments must be fully (and clearly) disclosed to reveal being paid by a brand name, as a sponsor, to review a product. The Canadian Radio-television and Telecommunications Commission is also closely monitoring such Internet activities.

  Read more →
• 

  CSS box model

  In web development, the CSS box model refers to how HTML elements are modeled in browser engines and how the dimensions of those HTML elements are derived from CSS properties. It is a fundamental concept for the composition of HTML webpages. The guidelines of the box model are described by web standards World Wide Web Consortium (W3C) specifically the CSS Working Group. For much of the late-1990s and early 2000s there had been non-standard compliant implementations of the box model in mainstream browsers. With the advent of CSS2 in 1998, which introduced the box-sizing property, the problem had mostly been resolved. == Specifics == The Cascading Style Sheets (CSS) specification describes how elements of web pages are displayed by graphical browsers. Section 4 of the CSS1 specification defines a "formatting model" that gives block-level elements—such as p and blockquote—a width and height, and three levels of boxes surrounding it: padding, borders, and margins. While the specification never uses the term "box model" explicitly, the term has become widely used by web developers and web browser vendors. All HTML elements can be considered "boxes", this includes div tag, p tag, or a tag. Each of those boxes has five modifiable dimensions: the height and width describe dimensions of the actual content of the box (text, images, ...) the padding describes the space between this content and the border of the box the border is any kind of line (solid, dotted, dashed...) surrounding the box, if present the margin is the space around the border According to the CSS1 specification, released by W3C in 1996 and revised in 1999, when a width or height is explicitly specified for any block-level element, it should determine only the width or height of the visible element, with the padding, borders, and margins applied afterward. Before CSS3, this box model was known as W3C box model, in CSS3, it is known as the content-box. The total width of a box is therefore margin-left + border-left + padding-left + width + padding-right + border-right + margin-right. Similarly, the total height of a box equals margin-top + border-top + padding-top + height + padding-bottom + border-bottom + margin-bottom. For example, the following CSS code would specify the box dimensions of each block belonging to 'my-class'. Moreover, each such box will have total height 140px and width 240px. CSS3 introduced the Internet Explorer box model to the standard, known referred to as border-box. == History == Before HTML 4 and CSS, very few HTML elements supported both border and padding, so the definition of the width and height of an element was not very contentious. However, it varied depending on the element. The HTML width attribute of a table defined the width of the table including its border. On the other hand, the HTML width attribute of an image defined the width of the image itself (inside any border). The only element to support padding in those early days was the table cell. Width for the cell was defined as "the suggested width for a cell content in pixels excluding the cell padding." In 1996, CSS introduced margin, border and padding for many more elements. It adopted a definition width in relation to content, border, margin and padding similar to that for a table cell. This has since become known as the W3C box model. At the time, very few browser vendors implemented the W3C box model to the letter. The two major browsers at the time, Netscape 4.0 and Internet Explorer 4.0 both defined width and height as the distance from border to border. This has been referred to as the traditional or the Internet Explorer box model. Internet Explorer in "quirks mode" includes the content, padding and borders within a specified width or height; this results in a narrower or shorter rendering of a box than would result following the standard behavior. The Internet Explorer box model behavior was often considered a bug, because of the way in which earlier versions of Internet Explorer handle the box model or sizing of elements in a web page, which differs from the standard way recommended by the W3C for the Cascading Style Sheets language. As of Internet Explorer 6, the browser supports an alternative rendering mode (called the "standards-compliant mode") which solves this discrepancy. However, for backward compatibility reasons, all versions still behave in the usual, non-standard way by default (see quirks mode). Internet Explorer for Mac is not affected by this non-standard behavior. === Workarounds === Internet Explorer versions 6 and onward are not affected by the bug if the page contains certain HTML document type declarations. These versions maintain the buggy behavior when in quirks mode for reasons of backward compatibility. For example, quirks mode is triggered: When the document type declaration is absent or incomplete; When an HTML 3 or earlier document is encountered; When an HTML 4.0 Transitional or Frameset document type declaration is used and a system identifier (URI) is not present; When an SGML comment or other unrecognized content appears before the document type declaration Internet Explorer 6 also uses quirks mode if there is an XML declaration prior to the document type declaration. Various workarounds have been devised to force Internet Explorer versions 5 and earlier to display Web pages using the W3C box model. These workarounds generally exploit unrelated bugs in Internet Explorer's CSS selector processing in order to hide certain rules from the browser. The best known of these workarounds is the "box model hack" developed by Tantek Çelik, a former Microsoft employee who developed this idea while working on Internet Explorer for the Macintosh. It involves specifying a width declaration for Internet Explorer for Windows, and then overriding it with another width declaration for CSS-compliant browsers. This second declaration is hidden from Internet Explorer for Windows by exploiting other bugs in the way that it parses CSS rules. The implementation of these CSS “hacks” has been further complicated by the public release of Internet Explorer 7, which has had some issues fixed, but not others, causing undesired results in pages using these hacks. Box model hacks have proven unreliable because they rely on bugs in browsers' CSS support that may be fixed in later versions. For this reason, some Web developers have instead recommended either avoiding specifying both width and padding for the same element or using conditional comment and/or CSS filters to work around the box model bug in older versions of Internet Explorer. == Support for Internet Explorer's box model == Web designer Doug Bowman has said that the original Internet Explorer box model represents a better, more logical approach. Peter-Paul Koch gives the example of a physical box, whose dimensions always refer to the box itself, including potential padding, but never its content. He says that this box model is more useful for graphic designers, who create designs based on the visible width of boxes rather than the width of their content. Bernie Zimmermann says that the Internet Explorer box model is closer to the definition of cell dimensions and padding used in the HTML table model. The W3C has included a "box-sizing" property in CSS3. When box-sizing: border-box; is specified for an element, any padding or border of the element is drawn inside the specified width and height, "as commonly implemented by legacy HTML user agents". Internet Explorer 8, WebKit browsers such as Apple Safari 5.1+ and Google Chrome, Gecko-based browsers such as Mozilla Firefox 29.0 and later, Opera 7.0 and later, and Konqueror 3.3.2 and later support the CSS3 box-sizing property. Gecko browsers previous than 29.0 support the same functionality using the browser-specific -moz-box-sizing property. border-box is the default box model used in Bootstrap framework.

  Read more →
• 

  Random (software)

  Random was an iOS mobile app that used algorithms and human-curation to create an adaptive interface to the Internet. The app served a remix of relevance and serendipity that allowed people to find diverse topics and interesting content that they might not have encountered otherwise. Random did not require a login or sign-up - the use of the app was anonymous. The app was powered by an artificial intelligence that learned from direct and indirect user interactions inside the app. While learning and adapting to a person, Random created a unique anonymous choice profile that was then used for recommending topics and content. The app didn't recommend the same content twice. == User interface == Random's user interface was made of ever-changing topic blocks that contained keywords and images. By choosing any of the blocks, the user would see related web content. By closing the web content, the user could access new related topics. The user interface allowed people to get more information about a specific topic area or then just leap freely from topic to topic. The content recommended by Random could be any type of web content, varying from news articles to long-form stories and from photographs to videos. Every user of the Random was curating content for other users by using the app. == History == Random was launched in March 2014. The startup was backed by Skype co-founder Janus Friis. The Random app received a strong reception from the likes of The New York Times, TechCrunch, New Scientist, Vice, and other leading publications. The app went on to gain traction with an active and loyal user community of several hundreds of thousands. This was not enough to support the free app model the team strongly believed in, and the service was terminated in December 2015. == Reception == Various reviews in media have emphasized that Random enables people to break their filter bubble and find diverse content they might not find elsewhere. Alan Henry of Lifehacker wrote: "Random... breaks you out by intentionally guiding you to new topics and interesting articles at sites you may not otherwise read." Vice Motherboard's Claire Evans says that: "Random never turns into a filter bubble, because it perpetually injects the irrational into my experience… in a cocktail of relevancy and serendipity." The app has been said to have a unique, minimalistic user experience. Kit Eaton of The New York Times commented that Random "let's you browse the news in a different way to all the other news sites you've probably ever used." Mashable reviewed Random by concluding that the "app may be one of the most simple content-discovery apps on the market."

  Read more →
• 

  Control communications

  In telecommunications, control communications is the branch of technology devoted to the design, development, and application of communications facilities used specifically for control purposes, such as for controlling (a) industrial processes, (b) movement of resources, (c) electric power generation, distribution, and utilization, (d) communications networks, and (e) transportation systems.

  Read more →
• 

  Temporal resolution

  Temporal resolution (TR) refers to the discrete resolution of a measurement with respect to time. It is defined as the amount of time needed to revisit and acquire data for the same location. When applied to remote sensing, this amount of time is influenced by the sensor platform's orbital characteristics and the features of the sensor itself. The temporal resolution is low when the revisiting delay is high and vice versa. Temporal resolution is typically expressed in days. == Physics == Often there is a trade-off between the temporal resolution of a measurement and its spatial resolution, due to Heisenberg's uncertainty principle. In some contexts, such as particle physics, this trade-off can be attributed to the finite speed of light and the fact that it takes a certain period of time for the photons carrying information to reach the observer. In this time, the system might have undergone changes itself. Thus, the longer the light has to travel, the lower the temporal resolution. == Technology == === Computing === In another context, there is often a tradeoff between temporal resolution and computer storage. A transducer may be able to record data every millisecond, but available storage may not allow this, and in the case of 4D PET imaging the resolution may be limited to several minutes. === Electronic displays === In some applications, temporal resolution may instead be equated to the sampling period, or its inverse, the refresh rate, or update frequency in Hertz, of a TV, for example. The temporal resolution is distinct from temporal uncertainty. This would be analogous to conflating image resolution with optical resolution. One is discrete, the other, continuous. The temporal resolution is a resolution somewhat the 'time' dual to the 'space' resolution of an image. In a similar way, the sample rate is equivalent to the pixel pitch on a display screen, whereas the optical resolution of a display screen is equivalent to temporal uncertainty. Note that both this form of image space and time resolutions are orthogonal to measurement resolution, even though space and time are also orthogonal to each other. Both an image or an oscilloscope capture can have a signal-to-noise ratio, since both also have measurement resolution. === Oscilloscopy === An oscilloscope is the temporal equivalent of a microscope, and it is limited by temporal uncertainty the same way a microscope is limited by optical resolution. A digital sampling oscilloscope has also a limitation analogous to image resolution, which is the sample rate. A non-digital non-sampling oscilloscope is still limited by temporal uncertainty. The temporal uncertainty can be related to the maximum frequency of continuous signal the oscilloscope could respond to, called the bandwidth and given in Hertz. But for oscilloscopes, this figure is not the temporal resolution. To reduce confusion, oscilloscope manufacturers use 'Sa/s' instead of 'Hz' to specify the temporal resolution. Two cases for oscilloscopes exist: either the probe settling time is much shorter than the real time sampling rate, or it is much larger. The case where the settling time is the same as the sampling time is usually undesirable in an oscilloscope. It is more typical to prefer a larger ratio either way, or if not, to be somewhat longer than two sample periods. In the case where it is much longer, the most typical case, it dominates the temporal resolution. The shape of the response during the settling time also has as strong effect on the temporal resolution. For this reason probe leads usually offer an arrangement to 'compensate' the leads to alter the trade off between minimal settling time, and minimal overshoot. If it is much shorter, the oscilloscope may be prone to aliasing from radio frequency interference, but this can be removed by repeatedly sampling a repetitive signal and averaging the results together. If the relationship between the 'trigger' time and the sample clock can be controlled with greater accuracy than the sampling time, then it is possible to make a measurement of a repetitive waveform with much higher temporal resolution than the sample period by upsampling each record before averaging. In this case the temporal uncertainty may be limited by clock jitter.

  Read more →
• 

  Mediated intercultural communication

  Mediated intercultural communication is digital communication between people of different cultural backgrounds. Media include social networks, blogs and conferencing services. Digital communication is distinct from traditional media, creating new avenues for intercultural communication. User take online classes; post, consume and comment on others content; and play multi-player video games. This creates spaces to form virtual communities that can ease communication across boundaries of space, time and culture. New media technologies can change culture in positive ways or become a tool of repression. == History == Intercultural communication is as ancient as human movement in search of food sources. The systematic study of intercultural communication began with Edward Hall's labor at the Foreign Service Institute, and the publication of his The Silent Language (1959). Later research, primarily focused on face-to-face communication in various areas such as interpersonal, group, and organizational and cultural identity. International and development media have been studied under the umbrella of international communication. Media imperialism, cultural imperialism and dependency theories inform this research. Mediated intercultural communication examines the bidirectional relationships between media and intercultural communication.

  Read more →
• 

  Spike (application)

  Spike is a cross-platform email client and AI-powered communication app, available on Windows, MacOS, iOS, Android and the web. It has a chat-like, conversational view for emails with AI-powered inbox management and integrated collaboration features. Depending on the selected plan, it can be used solely as an email application or as a full suite of business communication tools. == History == Founded in 2013 by Erez Pilosof and Dvir Ben-Aroya, Spike is a software application that puts existing e-mails into a multimedia messaging, chat-like interface enhanced with video and voice calls. The application was initially named Hop. In 2019, the developers completed a $5 million funding round including investment from Wix.com and NFX Capital. In 2020, Spike raised $8m in a Series A funding round led by Insight Partners with the participation from previous rounds' investors. In 2021 Spike announced a collaboration with Meta to launch on the Oculus Store and would become one of the first productivity apps to launch in Meta's new virtual world, known as the Metaverse. In June 2023, the company introduced its corporate offering — Teamspace, a corporate communication platform for teams with features such as company-wide channels for broad conversations, private groups for specific topics or projects, direct one-on-one conversations, video meetings, file collaboration, AI-powered email messaging, and custom email domain. It supports file management, search capabilities, and project management. Built on open-protocol technology, Spike Teamspace enables users to send and receive messages from all email providers. Regardless of whether the other party is using Spike. == Company operations == Spike is developed and operated by SpikeNow LTD. Dvir Ben Aroya serves as Spike’s CEO and Erez Pilosof is the CTO. The company is headquartered in Tel Aviv, Israel. == Mode of use == The app enables users to organize email into three types of "conversations,"a traditional inbox/sent format, by subject, or by people. Spike users can also make audio and video calls to each other, and other features include a calendar, contact list, and Groups. Spike is available for Microsoft Windows, MacOS, iOS and Android, and as a web version, and works with Gmail, Outlook, Exchange, iCloud, Yahoo! Mail and IMAP email providers. == Features == Since 2023, the platform features an AI-driven assistant, Magic AI, for customized email creation, document summarization, research, content generation, advanced note-taking, project management, and real-time translation. Since 2023, Spike offers custom email domain management. It supports team collaboration through Channels, uniting members globally with access to historical messages, and combines email with real-time messaging via Conversational Email. The Shared Inbox allows team collaboration on emails, while Groups support private conversations and invitations. It also features integrated video meetings, real-time collaboration on documents and notes, and email hosting with custom domains. Super Search enables retrieval of various content, and the Priority Inbox organizes emails by priority. Collaborative Tasks offer real-time updates and tracking. The platform allows voice message sending from mobile devices and integrates multiple calendar platforms into a unified schedule. File Management optimizes attachment handling, and the Unified Inbox consolidates emails from multiple accounts. Spike ensures data security with AES-256 encryption and private keys. The platform features AI-powered inbox management and communication tools. In May 2025, Spike launched its AI Feed feature, which automatically summarizes unread messages in a unified stream and enables bulk email actions. Additional AI capabilities include email composition assistance, document summarization, content generation, note-taking enhancement, and real-time translation.

  Read more →
• 

  Digital Cinema Initiatives

  Digital Cinema Initiatives, LLC (DCI) is a consortium of major motion picture studios, formed to establish specifications for a common systems architecture for digital cinema systems. The organization was formed in March 2002 by Metro-Goldwyn-Mayer, Paramount Pictures, Sony Pictures, 20th Century Studios, Universal Studios, Walt Disney Studios and Warner Bros. Entertainment The primary purpose of DCI is to establish and document specifications for an open architecture for digital cinema that ensures a uniform and high level of technical performance, reliability and quality. By establishing a common set of content requirements, distributors, studios, exhibitors, d-cinema manufacturers and vendors can be assured of interoperability and compatibility. Because of the relationship of DCI to many of Hollywood's key studios, conformance to DCI's specifications is considered a requirement by software developers or equipment manufacturers targeting the digital cinema market. == Specification == On July 20, 2005, DCI released Version 1.0 of its "Digital Cinema System Specification", commonly referred to as the "DCI Specification". The document describes overall system requirements and specifications for digital cinema. Between March 28, 2006, and March 21, 2007, DCI issued 148 errata to Version 1.0. DCI released Version 1.1 of the DCI Specification on April 12, 2007, incorporating the previous 148 errata into the DCI Specification. On April 15, 2007, at the annual NAB Digital Cinema Summit, DCI announced the new version, as well as some future plans. They released the "Stereoscopic Digital Cinema Addendum" to begin to establish 3-D technical specifications in response to the popularity of 3-D stereoscopic films. It was also announced "which studios would take over the leadership roles in DCI after the current leadership term expires at the end of September." Subsequently, between August 27, 2007, and February 1, 2008, DCI issued 100 errata to Version 1.1. So, DCI released Version 1.2 of the DCI Specification on March 7, 2008, again incorporating the previous 100 errata into the specification document. An additional 96 errata were issued by August 30, 2012, so a revised Version 1.2 incorporating those additional errata was approved on October 10, 2012. DCI approved DCI Specification Version 1.3 on June 27, 2018, integrating the 45 errata issued to the previous version into a new document. On July 20, 2020, fifteen years to the day after Version 1.0, DCI issued a new DCI Specification Version 1.4 that assimilated 29 errata issued since Version 1.3. On October 13, 2021, DCI approved a new DCI Specification Version 1.4.1 that integrated the 23 errata that had been issued to DCI Specification Version 1.4. For the convenience of users, DCI also created an online HTML version of DCI Specification, Version 1.4.1. Due to the HTML conversion process, the footnotes in the DCSS now appear as endnotes. The PDF version contains pagination and page numbers whereas the HTML version does not. DCI Specification Version 1.4.2, dated June 15, 2022, includes revisions and refinements respecting Object-Based Audio Essence (OBAE), also known as Immersive Audio Bitstream (IAB). Version 1.4.2 also implements post-show log record collection utilizing SMPTE 430-17 SMS-OMB Communications Protocol Specification. Additionally, Version 1.4.2 incorporated two prior addenda: the Digital Cinema Object-Based Audio Addendum, dated October 1, 2018 and the Stereoscopic Digital Cinema Addendum, Version 1.0, dated July 11, 2007. Users using Version 1.4.2 no longer need to refer to the separate addenda. Previous DCSS versions are archived on the DCI web site. Based on many SMPTE and ISO standards, such as JPEG 2000-compressed image and "broadcast wave" PCM/WAV sound, the DCI Specification explains the route to create an entire Digital Cinema Package (DCP) from a raw collection of files known as the Digital Cinema Distribution Master (DCDM), as well as the specifics of its content protection, encryption, and forensic marking. The DCI Specification also establishes standards for the decoder requirements and the presentation environment itself, such as ambient light levels, pixel aspect and shape, image luminance, white point chromaticity, and those tolerances to be kept. Even though it specifies what kind of information is required, the DCI Specification does not include specific information about how data within a distribution package is to be formatted. Formatting of this information is defined by the Society of Motion Picture and Television Engineers (SMPTE) digital cinema standards and related documents. == Image and audio capability overview == === 2D image === 2048×1080 (2K) at 24 frame/s or 48 frame/s, or 4096×2160 (4K) at 24 frame/s In 2K, for Scope (2.39:1) presentation 2048×858 pixels of the imager is used In 2K, for Flat (1.85:1) presentation 1998×1080 pixels of the imager is used In 4K, for Scope (2.39:1) presentation 4096×1716 pixels of the imager is used In 4K, for Flat (1.85:1) presentation 3996×2160 pixels of the imager is used 12 bits per color component (36 bits per pixel) via dual HD-SDI (encrypted) 10 bits only permitted for 2K at 48 frame/s CIE XYZ color space, gamma-corrected TIFF 6.0 container format (one file per frame) JPEG 2000 compression From 0 to 5 or from 1 to 6 wavelet decomposition levels for 2K or 4K resolutions, respectively Compression rate of 4.71 bits/pixel (2K @ 24 frame/s), 2.35 bits/pixel (2K @ 48 frame/s), 1.17 bits/pixel (4K @ 24 frame/s) 250 Mbit/s maximum image bit rate === Stereoscopic 3D image === 2048×1080 (2K) at 48 frame/s - 24 frame/s per eye (4096×2160 4K not supported) In 2K, for Scope (2.39:1) presentation 2048×858 pixels of the imager is used In 2K, for Flat (1.85:1) presentation 1998×1080 pixels of the imager is used Optionally, in the HD-SDI link only: 12 bit color, YCxCz 4:2:2 (i.e. chroma subsampling in XYZ space), each eye in separate stream === Audio === 24 bits per sample, 48 kHz or 96 kHz Up to 16 channels WAV container, uncompressed PCM DCI has additionally published a document outlining recommended practice for High Frame Rate digital cinema. This document discloses the following proposed frame rates: 60, 96, and 120 frames per second for 2D at 2K resolution; 48 and 60 for stereoscopic 3D at 2K resolution; 48 and 60 for 2D at 4K resolution. The maximum compressed bit rate for support of all proposed frame rates should be 500 Mbit/s. == Related information == The idea for DCI was originally mooted in late 1999 by Tom McGrath, then COO of Paramount Pictures, who applied to the U.S. Department of Justice for anti-trust waivers to allow the joint cooperation of all seven major motion picture studios. Universal Pictures made one of the first feature-length DCPs created to DCI specifications, using their film Serenity. Although it was not distributed theatrically, it had one public screening on November 7, 2005, at the USC Entertainment Technology Center's Digital Cinema Laboratory in the Pacific Theatre, Hollywood. Inside Man (2006) was Universal's first DCP commercial release, and, in addition to 35mm film distribution, was delivered via hard drive to 20 theatres in the United States along with two trailers. The Academy Film Archive houses the Digital Cinema Initiatives, LLC Collection, which includes film and digital elements from DCI's Standard Evaluation Material (StEM), a 12-minute production shot on 35mm and 65mm film, created for vendors and standards organizations to test and evaluate image compression and digital projection technologies.

  Read more →
• 

  Comet (programming)

  Comet is a web application model in which a long-held HTTPS request allows a web server to push data to a browser, without the browser explicitly requesting it. Comet is an umbrella term, encompassing multiple techniques for achieving this interaction. All these methods rely on features included by default in browsers, such as JavaScript, rather than on non-default plugins. The Comet approach differs from the original model of the web, in which a browser requests a complete web page at a time. The use of Comet techniques in web development predates the use of the word Comet as a neologism for the collective techniques. Comet is known by several other names, including Ajax Push, Reverse Ajax, Two-way-web, HTTP Streaming, and HTTP server push among others. The term Comet is not an acronym, but was coined by Alex Russell in his 2006 blog post. In recent years, the standardisation and widespread support of WebSocket and Server-sent events has rendered the Comet model obsolete. == History == === Early Java applets === The ability to embed Java applets into browsers (starting with Netscape Navigator 2.0 in March 1996) made two-way sustained communications possible, using a raw TCP socket to communicate between the browser and the server. This socket can remain open as long as the browser is at the document hosting the applet. Event notifications can be sent in any format – text or binary – and decoded by the applet. === The first browser-to-browser communication framework === The very first application using browser-to-browser communications was Tango Interactive, implemented in 1996–98 at the Northeast Parallel Architectures Center (NPAC) at Syracuse University using DARPA funding. TANGO architecture has been patented by Syracuse University. TANGO framework has been extensively used as a distance education tool. The framework has been commercialized by CollabWorx and used in a dozen or so Command&Control and Training applications in the United States Department of Defense. === First Comet applications === The first set of Comet implementations dates back to 2000, with the Pushlets, Lightstreamer, and KnowNow projects. Pushlets, a framework created by Just van den Broecke, was one of the first open source implementations. Pushlets were based on server-side Java servlets, and a client-side JavaScript library. Bang Networks – a Silicon Valley start-up backed by Netscape co-founder Marc Andreessen – had a lavishly financed attempt to create a real-time push standard for the entire web. In April 2001, Chip Morningstar began developing a Java-based (J2SE) web server which used two HTTP sockets to keep open two communications channels between the custom HTTP server he designed and a client designed by Douglas Crockford; a functioning demo system existed as of June 2001. The server and client used a messaging format that the founders of State Software, Inc. assented to coin as JSON following Crockford's suggestion. The entire system, the client libraries, the messaging format known as JSON and the server, became the State Application Framework, parts of which were sold and used by Sun Microsystems, Amazon.com, EDS and Volkswagen. In March 2006, software engineer Alex Russell coined the term Comet in a post on his personal blog. The new term was a play on Ajax (Ajax and Comet both being common household cleaners in the USA). In 2006, some applications exposed those techniques to a wider audience: Meebo’s multi-protocol web-based chat application enabled users to connect to AOL, Yahoo, and Microsoft chat platforms through the browser; Google added web-based chat to Gmail; JotSpot, a startup since acquired by Google, built Comet-based real-time collaborative document editing. New Comet variants were created, such as the Java-based ICEfaces JSF framework (although they prefer the term "Ajax Push"). Others that had previously used Java-applet based transports switched instead to pure-JavaScript implementations. == Implementations == Comet applications attempt to eliminate the limitations of the page-by-page web model and traditional polling by offering two-way sustained interaction, using a persistent or long-lasting HTTP connection between the server and the client. Since browsers and proxies are not designed with server events in mind, several techniques to achieve this have been developed, each with different benefits and drawbacks. The biggest hurdle is the HTTP 1.1 specification, which states "this specification... encourages clients to be conservative when opening multiple connections". Therefore, holding one connection open for real-time events has a negative impact on browser usability: the browser may be blocked from sending a new request while waiting for the results of a previous request, e.g., a series of images. This can be worked around by creating a distinct hostname for real-time information, which is an alias for the same physical server. This strategy is an application of domain sharding. Specific methods of implementing Comet fall into two major categories: streaming and long polling. === Streaming === An application using streaming Comet opens a single persistent connection from the client browser to the server for all Comet events. These events are incrementally handled and interpreted on the client side every time the server sends a new event, with neither side closing the connection. Specific techniques for accomplishing streaming Comet include the following: ==== Hidden iframe ==== A basic technique for dynamic web application is to use a hidden iframe HTML element (an inline frame, which allows a website to embed one HTML document inside another). This invisible iframe is sent as a chunked block, which implicitly declares it as infinitely long (sometimes called "forever frame"). As events occur, the iframe is gradually filled with script tags, containing JavaScript to be executed in the browser. Because browsers render HTML pages incrementally, each script tag is executed as it is received. Some browsers require a specific minimum document size before parsing and execution is started, which can be obtained by initially sending 1–2 kB of padding spaces. One benefit of the iframes method is that it works in every common browser. Two downsides of this technique are the lack of a reliable error handling method, and the impossibility of tracking the state of the request calling process. ==== XMLHttpRequest ==== The XMLHttpRequest (XHR) object, a tool used by Ajax applications for browser–server communication, can also be pressed into service for server–browser Comet messaging by generating a custom data format for an XHR response, and parsing out each event using browser-side JavaScript; relying only on the browser firing the onreadystatechange callback each time it receives new data. === Ajax with long polling === None of the above streaming transports work across all modern browsers without negative side-effects. This forces Comet developers to implement several complex streaming transports, switching between them depending on the browser. Consequently, many Comet applications use long polling, which is easier to implement on the browser side, and works, at minimum, in every browser that supports XHR. As the name suggests, long polling requires the client to poll the server for an event (or set of events). The browser makes an Ajax-style request to the server, which is kept open until the server has new data to send to the browser, which is sent to the browser in a complete response. The browser initiates a new long polling request in order to obtain subsequent events. IETF RFC 6202 "Known Issues and Best Practices for the Use of Long Polling and Streaming in Bidirectional HTTP" compares long polling and HTTP streaming. Specific technologies for accomplishing long-polling include the following: ==== XMLHttpRequest long polling ==== For the most part, XMLHttpRequest long polling works like any standard use of XHR. The browser makes an asynchronous request of the server, which may wait for data to be available before responding. The response can contain encoded data (typically XML or JSON) or Javascript to be executed by the client. At the end of the processing of the response, the browser creates and sends another XHR, to await the next event. Thus the browser always keeps a request outstanding with the server, to be answered as each event occurs. ==== Script tag long polling ==== While any Comet transport can be made to work across subdomains, none of the above transports can be used across different second-level domains (SLDs), due to browser security policies designed to prevent cross-site scripting attacks. That is, if the main web page is served from one SLD, and the Comet server is located at another SLD (which does not have cross-origin resource sharing enabled), Comet events cannot be used to modify the HTML and DOM of the main page, using those transports. This problem can be sidestepped by creating a proxy server in

  Read more →
• 

  Scandiweb

  scandiweb is a web development, digital strategy, AI consultation & implementation agency specializing in the Magento (Adobe Commerce) platform. The company was established in 2003 in Latvia by Antons Sapriko. It has offices in the United States, Sweden, Latvia, and Georgia. scandiweb provides solutions for primarily eCommerce businesses and acts as a strategic partner for IT development focusing on web, mobile, and big data analysis. T == Partnerships == scandiweb is an official Adobe Gold Partner, with the largest team of Adobe Commerce-certified employees. The company holds the Google Premier Partner status for 2025, placing it among top 3% agencies globally. scandiweb is a BigCommerce Certified Partner and a Pimcore Platinum Partner. Since 2016, scandiweb has been collaborating with Oro, Inc., an open-source business application development firm. scandiweb is a Platinum Partner of Hyvä, working with the Magento 2 frontend theme to optimize performance metrics. The company is also a Sanity Agency Partner, assisting with content management through Sanity’s headless CMS.

  Read more →
• 

  Text simplification

  Text simplification is an aspect of natural language processing that involves modifying, organizing, or categorizing existing text to make it easier to understand while retaining its original meaning. This process is essential in today's world, where communication is increasingly complex due to advancements in science, technology, and media. Human languages are inherently intricate, with extensive vocabularies and complex structures that can be challenging for machines to handle efficiently. Researchers have found that semantic compression techniques can help streamline and simplify text by reducing linguistic diversity and simplifying the vocabulary used in a given context. == Example == Text simplification involves modifying complex sentences into simpler ones to enhance readability and comprehension. Siddharthan (2006) provides an example to illustrate this process. The original sentence contains multiple clauses and phrases, which can be broken down into simpler sentences for better understanding. Also contributing to the firmness in copper, the analyst noted, was a report by Chicago purchasing agents, which precedes the full purchasing agents report that is due out today and gives an indication of what the full report might hold. Also contributing to the firmness in copper, the analyst noted, was a report by Chicago purchasing agents. The Chicago report precedes the full purchasing agents report. The Chicago report gives an indication of what the full report might hold. The full report is due out today. An approach to text simplification involves lexical simplification via lexical substitution, a process that replaces complex words with simpler synonyms. Identifying complex words is a challenge addressed by machine learning classifiers trained on labeled data. Researchers have found that asking labelers to sort words by complexity levels yields more consistent results than the traditional method of categorizing words as simple or complex.

  Read more →
• 

  Macroelectronics

  Macroelectronics are flexible electronics that cover a large area. The most visible example of macroelectronics is flat-panel displays. Other emerging applications include rollable display, printable thin film solar cell and electronic skin. Flat-panel displays fabricated on glass substrates are fragile so fabricating directly on flexible substrates, such as polymers is being explored. Displays made on thin polymer substrates can be more rugged than glass. In September 2005, Philips Polymer Vision revealed the world's first prototype of a rollable electronic reader, which can unfold to a 5-inch display and roll back into a pocket-size (100×60×20 mm) device. Thin-film devices on flexible polymer substrates can lend themselves to low-cost fabrication processes (i.e., roll-to-roll printing), resulting in lightweight, rugged and flexible macroelectronic products.

  Read more →
• 

  SPACEMAP

  SPACEMAP (Korean: 스페이스맵) is a South Korean satellite orbit optimization and satellite communications company headquartered in Seoul, South Korea. The company was founded in 2021 by CEO, Douglas Deok-Soo Kim, as an offshoot of Hanyang University. It was funded by the Leader Research grant from the National Research Foundation of Korea with the goal of capitalizing on the growing space industry. == History == Kim initially began research into Voronoi diagrams at the University of Michigan. He met with Dr. Misoon Ma, former director of the Asia Division of the U.S. Air Force Office of Scientific Research (AFOSR) and was recruited to work with the U.S. Air force, using Voronoi diagrams for a satellite collision prevention program. After his work with the U.S. Air Force, Kim founded SPACEMAP Inc in September 2021. In 2023, the company was selected by Korea's Tech Incubator Program for Startups (TIPS) to be funded up to 17 billion KRW (approx. US$13 million) in 3 years. == Technology == The services provided by SPACEMAP are based on using dynamic Voronoi diagrams to predict satellite orbits with the aim of enhancing space mission safety and efficiency. For complex problems involving many moving points, Voronoi diagrams maintain a near-constant computation time regardless of the number of points involved. By utilizing Voronoi diagrams and artificial intelligence, the software can easily determine the number of neighboring satellites surrounding a specific satellite and calculate the distances between them, thereby predicting the probability of a collision. SPACEMAP claims their method to be superior in computational time and memory efficiency, compared to the previously established three-filter method. == Products == SPACEMAP offers satellite products and services including the following: AstroOne, a conjunction assessment, and optimal collision avoidance service for all space vehicles in both orbital and non-orbital motions. AstroOrca, providing data transmission for satellites in multiple orbits, launch optimization, shuttle logistics for space gas stations, and Active Debris Removal (ADR) itinerary. AstroLibrary, a library of RESTful APIs to access the C++ implementation of SPACEMAP's Voronoi diagram algorithms wrapped in a Python interface. It also provides real-time tracking of the North Korean reconnaissance satellite, Malligyong-1.

  Read more →