AI Avatar Talking Free

AI Avatar Talking Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Non-native speech database

  A non-native speech database is a speech database of non-native pronunciations of English. Such databases are used in the development of: multilingual automatic speech recognition systems, text to speech systems, pronunciation trainers, and second language learning systems. == List == The actual table with information about the different databases is shown in Table 2. === Legend === In the table of non-native databases some abbreviations for language names are used. They are listed in Table 1. Table 2 gives the following information about each corpus: The name of the corpus, the institution where the corpus can be obtained, or at least further information should be available, the language which was actually spoken by the speakers, the number of speakers, the native language of the speakers, the total amount of non-native utterances the corpus contains, the duration in hours of the non-native part, the date of the first public reference to this corpus, some free text highlighting special aspects of this database and a reference to another publication. The reference in the last field is in most cases to the paper which is especially devoted to describe this corpus by the original collectors. In some cases it was not possible to identify such a paper. In these cases a paper is referenced which is using this corpus is. Some entries are left blank and others are marked with unknown. The difference here is that blank entries refer to attributes where the value is just not known. Unknown entries, however, indicate that no information about this attribute is available in the database itself. As an example, in the Jupiter weather database no information about the origin of the speakers is given. Therefore this data would be less useful for verifying accent detection or similar issues. Where possible, the name is a standard name of the corpus, for some of the smaller corpora, however, there was no established name and hence an identifier had to be created. In such cases, a combination of the institution and the collector of the database is used. In the case where the databases contain native and non-native speech, only attributes of the non-native part of the corpus are listed. Most of the corpora are collections of read speech. If the corpus instead consists either partly or completely of spontaneous utterances, this is mentioned in the Specials column.

  Read more →
• 

  BREACH

  BREACH (a backronym: Browser Reconnaissance and Exfiltration via Adaptive Compression of Hypertext) is a security vulnerability against HTTPS when using HTTP compression. BREACH is built based on the CRIME security exploit. BREACH was announced at the August 2013 Black Hat USA conference by security researchers Angelo Prado, Neal Harris and Yoel Gluck. == Details == While the CRIME attack was presented as a general attack that could work effectively against a large number of protocols, only exploits against SPDY request compression and TLS compression were demonstrated and largely mitigated in browsers and servers. The CRIME exploits against HTTP compression has not been mitigated at all, even though the authors of CRIME have warned that this vulnerability might be even more widespread than SPDY and TLS compression combined. BREACH is an instance of the CRIME attack against HTTP compression—the use of gzip or DEFLATE data compression algorithms via the content-encoding option within HTTP by many web browsers and servers. Given this compression oracle, the rest of the BREACH attack follows the same general lines as the CRIME exploit, by performing an initial blind brute-force search to guess a few bytes, followed by divide-and-conquer search to expand a correct guess to an arbitrarily large amount of content. == Mitigation == BREACH exploits the compression in the underlying HTTP protocol. Therefore, turning off TLS compression makes no difference to BREACH, which can still perform a chosen-plaintext attack against the HTTP payload. As a result, clients and servers are either forced to disable HTTP compression completely (thus reducing performance), or to adopt workarounds to try to foil BREACH in individual attack scenarios, such as using cross-site request forgery (CSRF) protection. Another suggested approach is to disable HTTP compression whenever the referrer header indicates a cross-site request, or when the header is not present. This approach allows effective mitigation of the attack without losing functionality, only incurring a performance penalty on affected requests. Another approach is to add padding at the TLS, HTTP header, or payload level. Around 2013–2014, there was an IETF draft proposal for a TLS extension for length-hiding padding that, in theory, could be used as a mitigation against this attack. It allows the actual length of the TLS payload to be disguised by the insertion of padding to round it up to a fixed set of lengths, or to randomize the external length, thereby decreasing the likelihood of detecting small changes in compression ratio that is the basis for the BREACH attack. However, this draft has since expired without further action. A very effective mitigation is HTB (Heal-the-BREACH) that adds random-sized padding to compressed data, providing some variance in the size of the output contents. This randomness delays BREACH from guessing the correct characters in the secret token by a factor of 500 (10-byte max) to 500,000 (100-byte max). HTB protects all websites and pages in the server with minimal CPU usage and minimal bandwidth increase.

  Read more →
• 

  Copyright

  A copyright is a type of intellectual property that gives its owner the exclusive legal right to copy, distribute, adapt, display, and perform a creative work, usually for a limited time. The creative work may be in a literary, artistic, educational, or musical form. Copyright is intended to protect the original expression of an idea in the form of a creative work, but not the idea itself. A copyright is subject to limitations based on public interest considerations, such as the fair use doctrine in the United States and fair dealing doctrine in the United Kingdom. Some jurisdictions require "fixing" copyrighted works in a tangible form. It is often shared among multiple authors, each of whom holds a set of rights to use or license the work, and who are commonly referred to as rights holders. These rights normally include reproduction, control over derivative works, distribution, public performance, and moral rights such as attribution. Copyrights can be granted by public law and are in that case considered "territorial rights". This means that copyrights granted by the law of a certain state do not extend beyond the territory of that specific jurisdiction. Copyrights of this type vary by country; many countries, and sometimes a large group of countries, have made agreements with other countries on procedures applicable when works "cross" national borders or national rights are inconsistent. Typically, the public law duration of a copyright expires 50 to 100 years after the creator dies, depending on the jurisdiction. Some countries require certain copyright formalities to establishing copyright, others recognize copyright in any completed work, without a formal registration. When the copyright of a work expires, it enters the public domain. == History == === Background === The concept of copyright developed after the printing press came into use in Europe in the 15th and 16th centuries. It was associated with a common law and rooted in the civil law system. The printing press made it much cheaper to produce works, but as there was initially no copyright law, anyone could buy or rent a press and print any text. Popular new works were immediately re-set and re-published by competitors, so printers needed a constant stream of new material. Fees paid to authors for new works were high and significantly supplemented the incomes of many academics. Printing brought profound social changes. The rise in literacy across Europe led to a dramatic increase in the demand for reading matter. Prices of reprints were low, so publications could be bought by poorer people, creating a mass audience. In German-language markets before the advent of copyright, technical materials, like academic papers and handbooks, were inexpensive and widely available; it has been suggested this contributed to Germany's industrial and economic success. === Conception === The concept of copyright first developed in England. In reaction to the printing of "scandalous books and pamphlets", the English Parliament passed the Licensing of the Press Act 1662, which required all intended publications to be registered with the government-approved Stationers' Company, giving the Stationers the right to regulate what material could be printed. The Statute of Anne, enacted in 1710 in England and Scotland, provided the first legislation to protect copyrights (but not authors' rights). The Copyright Act 1814 extended more rights for authors but did not protect British publications from being reprinted in the US. The Berne International Copyright Convention of 1886 finally provided protection for authors among the countries who signed the agreement, although the US did not join the Berne Convention until 1989. In the US, the Constitution grants Congress the right to establish copyright and patent laws. Shortly after the Constitution was passed, Congress enacted the Copyright Act of 1790, modeling it after the Statute of Anne. While the national law protected authors' published works, authority was granted to the states to protect authors' unpublished works. The most recent major overhaul of copyright in the US, the Copyright Act of 1976, extended federal copyright to works as soon as they are created and "fixed", without requiring publication or registration. State law continues to apply to unpublished works that are not otherwise copyrighted by federal law. This act also changed the calculation of copyright term from a fixed term (then a maximum of fifty-six years) to "life of the author plus 50 years". These changes brought the US closer to conformity with the Berne Convention, and in 1989 the United States further revised its copyright law and joined the Berne Convention officially. Copyright laws allow products of creative human activities, such as literary and artistic production, to be preferentially exploited and thus incentivized. Different cultural attitudes, social organizations, economic models and legal frameworks are seen to account for why copyright emerged in Europe and not, for example, in Asia. In the Middle Ages in Europe, there was generally a lack of any concept of literary property due to the general relations of production, the specific organization of literary production and the role of culture in society. The latter refers to the tendency of oral societies, such as that of Europe in the medieval period, to view knowledge as the product and expression of the collective, rather than to see it as individual property. However, with copyright laws, intellectual production comes to be seen as a product of an individual, with attendant rights. The most significant point is that patent and copyright laws support the expansion of the range of creative human activities that can be commodified. This parallels the ways in which capitalism led to the commodification of many aspects of social life that earlier had no monetary or economic value perse. Copyright has developed into a concept that has a significant effect on nearly every modern industry, including not just literary work, but also forms of creative work such as sound recordings, films, photographs, software, and architecture. === National copyrights === Often seen as the first real copyright law, the 1709 British Statute of Anne gave authors and the publishers to whom they did chose to license their works, the right to publish the author's creations for a fixed period, after which the copyright expired. It was "An Act for the Encouragement of Learning, by Vesting the Copies of Printed Books in the Authors or the Purchasers of such Copies, during the Times therein mentioned." The act also alluded to individual rights of the artist. It began: "Whereas Printers, Booksellers, and other Persons, have of late frequently taken the Liberty of Printing ... Books, and other Writings, without the Consent of the Authors ... to their very great Detriment, and too often to the Ruin of them and their Families:". A right to benefit financially from the work is articulated, and court rulings and legislation have recognized a right to control the work, such as ensuring that the integrity of it is preserved. An irrevocable right to be recognized as the work's creator appears in some countries' copyright laws. The Copyright Clause of the United States, Constitution (1787) authorized copyright legislation: "To promote the Progress of Science and useful Arts, by securing for limited Times to Authors and Inventors the exclusive Right to their respective Writings and Discoveries." That is, by guaranteeing them a period of time in which they alone could profit from their works, they would be enabled and encouraged to invest the time required to create them, and this would be good for society as a whole. A right to profit from the work has been the philosophical underpinning for much legislation extending the duration of copyright, to the life of the creator and beyond, to their heirs. Yet scholars like Lawrence Lessig have argued that copyright terms have been extended beyond the scope imagined by the Framers. Lessig refers to the Copyright Clause as the "Progress Clause" to emphasize the social dimension of intellectual property rights. The original length of copyright in the United States was 14 years, and it had to be explicitly applied for. If the author wished, they could apply for a second 14‑year monopoly grant, but after that the work entered the public domain, so it could be used and built upon by others. === Continental law === In many jurisdictions of the European continent, comparable legal concepts to copyright did exist from the 16th century on but did change under Napoleonic rule into another legal concept: authors' rights or creator's right laws, from French: droits d'auteur and German Urheberrecht. In many modern-day publications the terms copyright and authors' rights are being mixed, or used as translations, but in a juridical sense the legal concepts do essentially differ. Authors' rights are, generally speaking,

  Read more →
• 

  Data grid

  A data grid is an architecture or set of services that allows users to access, modify and transfer extremely large amounts of geographically distributed data for research purposes. Data grids make this possible through a host of middleware applications and services that pull together data and resources from multiple administrative domains and then present it to users upon request. The data in a data grid can be located at a single site or multiple sites where each site can be its own administrative domain governed by a set of security restrictions as to who may access the data. Likewise, multiple replicas of the data may be distributed throughout the grid outside their original administrative domain and the security restrictions placed on the original data for who may access it must be equally applied to the replicas. Specifically developed data grid middleware is what handles the integration between users and the data they request by controlling access while making it available as efficiently as possible. == Middleware == Middleware provides all the services and applications necessary for efficient management of datasets and files within the data grid while providing users quick access to the datasets and files. There is a number of concepts and tools that must be available to make a data grid operationally viable. However, at the same time not all data grids require the same capabilities and services because of differences in access requirements, security and location of resources in comparison to users. In any case, most data grids will have similar middleware services that provide for a universal name space, data transport service, data access service, data replication and resource management service. When taken together, they are key to the data grids functional capabilities. === Universal namespace === Since sources of data within the data grid will consist of data from multiple separate systems and networks using different file naming conventions, it would be difficult for a user to locate data within the data grid and know they retrieved what they needed based solely on existing physical file names (PFNs). A universal or unified name space makes it possible to create logical file names (LFNs) that can be referenced within the data grid that map to PFNs. When an LFN is requested or queried, all matching PFNs are returned to include possible replicas of the requested data. The end user can then choose from the returned results the most appropriate replica to use. This service is usually provided as part of a management system known as a Storage Resource Broker (SRB). Information about the locations of files and mappings between the LFNs and PFNs may be stored in a metadata or replica catalogue. The replica catalogue would contain information about LFNs that map to multiple replica PFNs. === Data transport service === Another middleware service is that of providing for data transport or data transfer. Data transport will encompass multiple functions that are not just limited to the transfer of bits, to include such items as fault tolerance and data access. Fault tolerance can be achieved in a data grid by providing mechanisms that ensures data transfer will resume after each interruption until all requested data is received. There are multiple possible methods that might be used to include starting the entire transmission over from the beginning of the data to resuming from where the transfer was interrupted. As an example, GridFTP provides for fault tolerance by sending data from the last acknowledged byte without starting the entire transfer from the beginning. The data transport service also provides for the low-level access and connections between hosts for file transfer. The data transport service may use any number of modes to implement the transfer to include parallel data transfer where two or more data streams are used over the same channel or striped data transfer where two or more steams access different blocks of the file for simultaneous transfer to also using the underlying built-in capabilities of the network hardware or specifically developed protocols to support faster transfer speeds. The data transport service might optionally include a network overlay function to facilitate the routing and transfer of data as well as file I/O functions that allow users to see remote files as if they were local to their system. The data transport service hides the complexity of access and transfer between the different systems to the user so it appears as one unified data source. === Data access service === Data access services work hand in hand with the data transfer service to provide security, access controls and management of any data transfers within the data grid. Security services provide mechanisms for authentication of users to ensure they are properly identified. Common forms of security for authentication can include the use of passwords or Kerberos (protocol). Authorization services are the mechanisms that control what the user is able to access after being identified through authentication. Common forms of authorization mechanisms can be as simple as file permissions. However, need for more stringent controlled access to data is done using Access Control Lists (ACLs), Role-Based Access Control (RBAC) and Tasked-Based Authorization Controls (TBAC). These types of controls can be used to provide granular access to files to include limits on access times, duration of access to granular controls that determine which files can be read or written to. The final data access service that might be present to protect the confidentiality of the data transport is encryption. The most common form of encryption for this task has been the use of SSL while in transport. While all of these access services operate within the data grid, access services within the various administrative domains that host the datasets will still stay in place to enforce access rules. The data grid access services must be in step with the administrative domains access services for this to work. === Data replication service === To meet the needs for scalability, fast access and user collaboration, most data grids support replication of datasets to points within the distributed storage architecture. The use of replicas allows multiple users faster access to datasets and the preservation of bandwidth since replicas can often be placed strategically close to or within sites where users need them. However, replication of datasets and creation of replicas is bound by the availability of storage within sites and bandwidth between sites. The replication and creation of replica datasets is controlled by a replica management system. The replica management system determines user needs for replicas based on input requests and creates them based on availability of storage and bandwidth. All replicas are then cataloged or added to a directory based on the data grid as to their location for query by users. In order to perform the tasks undertaken by the replica management system, it needs to be able to manage the underlying storage infrastructure. The data management system will also ensure the timely updates of changes to replicas are propagated to all nodes. ==== Replication update strategy ==== There are a number of ways the replication management system can handle the updates of replicas. The updates may be designed around a centralized model where a single master replica updates all others, or a decentralized model, where all peers update each other. The topology of node placement may also influence the updates of replicas. If a hierarchy topology is used then updates would flow in a tree like structure through specific paths. In a flat topology it is entirely a matter of the peer relationships between nodes as to how updates take place. In a hybrid topology consisting of both flat and hierarchy topologies updates may take place through specific paths and between peers. ==== Replication placement strategy ==== There are a number of ways the replication management system can handle the creation and placement of replicas to best serve the user community. If the storage architecture supports replica placement with sufficient site storage, then it becomes a matter of the needs of the users who access the datasets and a strategy for placement of replicas. There have been numerous strategies proposed and tested on how to best manage replica placement of datasets within the data grid to meet user requirements. There is not one universal strategy that fits every requirement the best. It is a matter of the type of data grid and user community requirements for access that will determine the best strategy to use. Replicas can even be created where the files are encrypted for confidentiality that would be useful in a research project dealing with medical files. The following section contains several strategies for replica placement. ===== Dynamic replication ===== Dynam

  Read more →
• 

  Dispo

  Dispo (formerly David's Disposable) is an American photo sharing and social networking app owned by Dispo, Inc. and co-founded by CEO Daniel Liss, YouTuber David Dobrik, and Natalie Mariduena. When the app initially launched on iOS in December 2019, it briefly charted as the most downloaded free app on the App Store, ahead of both Disney+ and Instagram. The app was rebranded and relaunched as Dispo, expanding from a simple camera app to a full social network in March 2021. It is based on the disposable camera. == History == On December 21, 2019, the app was first launched on the App Store under the name "David's Disposable." In its first week of release, it was downloaded more than a million times, reaching number one among free apps in the App Store. In June 2020, the team decided to rename the app to Dispo, purchasing the Dispo.fun domain on June 21, 2020. The company announced the change in September 2020. The early Dispo team consisted of Dobrik's longtime friend and business associate Natalie Mariduena as its treasurer, entrepreneur and venture capitalist Daniel Liss as chief executive officer, Regynald Augustin as first engineer, and Briana Hokanson as lead designer. In October 2020, the company raised a $4M seed round with backing from Alexis Ohanian's venture fund Seven Seven Six alongside other investors including Unshackled Ventures, Shrug Capital, and Weekend Fund. In February 2021, Axios reported that the app had generated US$20 million in its series A round, led by Spark Capital. At this time, the app was valued at US$200 million. A New York Times profile asked, "Are Disposables the Future of Photosharing?" In March 2021, the app was officially relaunched with new social network features and its invite-only feature was dropped. On March 21, 2021, it was announced that Spark Capital would sever all ties with Dispo in light of several disparaging allegations against David Dobrik and The Vlog Squad. The same day, it was announced that Dobrik would leave the company and step down from the company's board of directors. On March 22, 2021, Seven Seven Six and Unshackled Ventures announced they would be standing by the company and its remaining employees but donating profits to charity. In June, 2021, CEO Daniel Liss announced Dispo's official Series A. Investors and advisors in the new Dispo include Ohanian's Seven Seven Six, Unshackled, Endeavor, photographers Annie Leibovitz and Raven B. Varona, NBA stars Kevin Durant and Andre Iguodala (through their 35 Ventures and F9 Strategies venture firms, respectively). Other participants include Cara Delevingne, Sofia Vergara, Shade Room CEO Angelica Nwandu, Latin World Entertainment CEO Luis Balaguer, and Amplify Africa co-founders Damilare Kujembola and Timi Adeyeba. == Overview == Dispo has been compared to other image sharing and social networking services, most notably Instagram and VSCO, although users cannot immediately see the photos they have taken using the app. When a user attempts to take a photo, the interface mimics the developing process of a disposable camera. Users can take as many photos on the app as they want; they do not appear on the app however, until 9 am the next day. Once the set of photos appear on the app, users can choose to save them or share them with other users in a "roll". == Reception == Screen Rant has called the app "like Clubhouse [referring to the app] but for photos," comparing the early invite-only features of the apps. As it greatly restricts the user's editing options and sets out to offer a more authentic social networking experience, the app has been widely dubbed the "anti-Instagram". Between March 2021 and June 2021, the app reached the top ten in the App Store's photo/video rankings on 5 continents including in the US, Japan, Spain, Germany, Brazil, and Australia. It has been a notable success in Japan, where it opened its first international office in July 2021. In July 2021, NBA number one draft pick Cade Cunningham announced he had selected Dispo as his exclusive social media partner for the NBA draft.

  Read more →
• 

  Computer network engineering

  Computer network engineering is a technology discipline within engineering that deals with the design, implementation, and management of computer networks. These systems contain both physical components, such as routers, switches, cables, and some logical elements, such as protocols and network services. Computer network engineers attempt to ensure that the data is transmitted efficiently, securely, and reliably over both local area networks (LANs) and wide area networks (WANs), as well as across the Internet. Computer networks often play a large role in modern industries ranging from telecommunications to cloud computing, enabling processes such as email and file sharing, as well as complex real-time services like video conferencing and online gaming. == Background == The evolution of network engineering is marked by significant milestones that have greatly impacted communication methods. These milestones particularly highlight the progress made in developing communication protocols that are vital to contemporary networking. This discipline originated in the 1960s with projects like ARPANET, which initiated important advancements in reliable data transmission. The advent of protocols such as TCP/IP revolutionized networking by enabling interoperability among various systems, which, in turn, fueled the rapid growth of the Internet. Key developments include the standardization of protocols and the shift towards increasingly complex layered architectures. These advancements have profoundly changed the way devices interact across global networks. == Network infrastructure design == The foundation of computer network engineering lies in the design of the network infrastructure. This involves planning both the physical layout of the network and its logical topology to ensure optimal data flow, reliability, and scalability. === Physical infrastructure === The physical infrastructure consists of the hardware used to transmit data, which is represented by the first layer of the OSI model. ==== Cabling ==== Copper cables such as ethernet over twisted pair are commonly used for short-distance connections, especially in local area networks (LANs), while fiber optic cables are favored for long-distance communication due to their high-speed transmission capabilities and lower susceptibility to interference. Fiber optics play a significant role in the backbone of large-scale networks, such as those used in data centers and internet service provider (ISP) infrastructures. ==== Wireless networks ==== In addition to wired connections, wireless networks have become a common component of physical infrastructure. These networks facilitate communication between devices without the need for physical cables, providing flexibility and mobility. Wireless technologies use a range of transmission methods, including radio frequency (RF) waves, infrared signals, and laser-based communication, allowing devices to connect to the network. Wi-Fi based on IEEE 802.11 standards is the most widely used wireless technology in local area networks and relies on RF waves to transmit data between devices and access points. Wireless networks operate across various frequency bands, including 2.4 GHz and 5 GHz, each offering unique ranges and data rates; the 2.4 GHz band provides broader coverage, while the 5 GHz band supports faster data rates with reduced interference, ideal for densely populated environments. Beyond Wi-Fi, other wireless transmission methods, such as infrared and laser-based communication, are used in specific contexts, like short-range, line-of-sight links or secure point-to-point communication. In mobile networks, cellular technologies like 3G, 4G, and 5G enable wide-area wireless connectivity. 3G introduced faster data rates for mobile browsing, while 4G significantly improved speed and capacity, supporting advanced applications like video streaming. The latest evolution, 5G, operates across a range of frequencies, including millimeter-wave bands, and provides high data rates, low latency, and support for more device connectivity, useful for applications like the Internet of Things (IoT) and autonomous systems. Together, these wireless technologies allow networks to meet a variety of connectivity needs across local and wide areas. ==== Network devices ==== Routers and switches help direct data traffic and assist in maintaining network security; network engineers configure these devices to optimize traffic flow and prevent network congestion. In wireless networks, wireless access points (WAP) allow devices to connect to the network. To expand coverage, multiple access points can be placed to create a wireless infrastructure. Beyond Wi-Fi, cellular network components like base stations and repeaters support connectivity in wide-area networks, while network controllers and firewalls manage traffic and enforce security policies. Together, these devices enable a secure, flexible, and scalable network architecture suitable for both local and wide-area coverage. === Logical topology === Beyond the physical infrastructure, a network must be organized logically, which defines how data is routed between devices. Various topologies, such as star, mesh, and hierarchical designs, are employed depending on the network’s requirements. In a star topology, for example, all devices are connected to a central hub that directs traffic. This configuration is relatively easy to manage and troubleshoot but can create a single point of failure. In contrast, a mesh topology, where each device is interconnected with several others, offers high redundancy and reliability but requires a more complex design and larger hardware investment. Large networks, especially those in enterprises, often employ a hierarchical model, dividing the network into core, distribution, and access layers to enhance scalability and performance. == Network protocols and communication standards == Communication protocols dictate how data in a network is transmitted, routed, and delivered. Depending on the goals of the specific network, protocols are selected to ensure that the network functions efficiently and securely. The Transmission Control Protocol/Internet Protocol (TCP/IP) suite is fundamental to modern computer networks, including the Internet. It defines how data is divided into packets, addressed, routed, and reassembled. The Internet Protocol (IP) is critical for routing packets between different networks. In addition to traditional protocols, advanced protocols such as Multiprotocol Label Switching (MPLS) and Segment Routing (SR) enhance traffic management and routing efficiency. For intra-domain routing, protocols like Open Shortest Path First (OSPF) and Enhanced Interior Gateway Routing Protocol (EIGRP) provide dynamic routing capabilities. On the local area network (LAN) level, protocols like Virtual Extensible LAN (VXLAN) and Network Virtualization using Generic Routing Encapsulation (NVGRE) facilitate the creation of virtual networks. Furthermore, Internet Protocol Security (IPsec) and Transport Layer Security (TLS) secure communication channels, ensuring data integrity and confidentiality. For real-time applications, protocols such as Real-time Transport Protocol (RTP) and WebRTC provide low-latency communication, making them suitable for video conferencing and streaming services. Additionally, protocols like QUIC enhance web performance and security by establishing secure connections with reduced latency. == Network security == As networks have become essential for business operations and personal communication, the demand for robust security measures has increased. Network security is a critical component of computer network engineering, concentrating on the protection of networks against unauthorized access, data breaches, and various cyber threats. Engineers are responsible for designing and implementing security measures that ensure the integrity and confidentiality of data transmitted across networks. Firewalls serve as barriers between trusted internal networks and external environments, such as the Internet. Network engineers configure firewalls, including next-generation firewalls (NGFW), which incorporate advanced features such as deep packet inspection and application awareness, thereby enabling more refined control over network traffic and protection against sophisticated attacks. In addition to firewalls, engineers use encryption protocols, including Internet Protocol Security (IPsec) and Transport Layer Security (TLS), to secure data in transit. These protocols provide a means of safeguarding sensitive information from interception and tampering. For secure remote access, Virtual Private Networks (VPNs) are deployed, using technologies to create encrypted tunnels for data transmission over public networks. These VPNs are often used for maintaining security when remote users access corporate networks but are also used ion other settings. To enhance threat detection and r

  Read more →
• 

  Internet

  The Internet (or internet) is the global system of interconnected computer networks that uses the Internet protocol suite (TCP/IP) to communicate between networks and devices. It is a network of networks that comprises private, public, academic, business, and government networks of local to global scope, linked by electronic, wireless, and optical networking technologies. The Internet carries a vast range of information services and resources, such as the interlinked hypertext documents and applications of the World Wide Web (WWW), electronic mail, discussion groups, internet telephony, streaming media and file sharing. Most traditional communication media, including telephone, radio, television, paper mail, newspapers, and print publishing, have been transformed by the Internet, giving rise to new media such as email, online music, digital newspapers, news aggregators, and audio and video streaming websites. The Internet has enabled and accelerated new forms of personal interaction through instant messaging, Internet forums, and social networking services. Online shopping has also grown to occupy a significant market across industries, enabling firms to extend brick and mortar presences to serve larger markets. Business-to-business and financial services on the Internet affect supply chains across entire industries. The origins of the Internet date back to research that enabled the time-sharing of computer resources, the development of packet switching, and the design of computer networks for data communication. The set of communication protocols to enable internetworking on the Internet arose from research and development commissioned in the 1970s by the Defense Advanced Research Projects Agency (DARPA) of the United States Department of Defense in collaboration with universities and researchers across the United States, United Kingdom and France. The Internet has no single centralized governance in either technological implementation or policies for access and usage. Each constituent network sets its own policies. The overarching definitions of the two principal name spaces on the Internet, the Internet Protocol address (IP address) space and the Domain Name System (DNS), are directed by a maintainer organization, the Internet Corporation for Assigned Names and Numbers (ICANN). The technical underpinning and standardization of the core protocols is an activity of the non-profit Internet Engineering Task Force (IETF). == Terminology == The word internetted was used as early as 1849, meaning interconnected or interwoven. The word Internet was used in 1945 by the United States War Department in a radio operator's manual, and in 1974 as the shorthand form of Internetwork. Today, the term Internet most commonly refers to the global system of interconnected computer networks, though it may also refer to any group of smaller networks. The word Internet may be capitalized as a proper noun, although this is becoming less common. This reflects the tendency in English to capitalize new terms and move them to lowercase as they become familiar. The word is sometimes still capitalized to distinguish the global internet from smaller networks, though many publications, including the AP Stylebook since 2016, recommend the lowercase form in every case. In 2016, the Oxford English Dictionary found that, based on a study of around 2.5 billion printed and online sources, "Internet" was capitalized in 54% of cases. The terms Internet and World Wide Web are often used interchangeably; it is common to speak of "going on the Internet" when using a web browser to view web pages. However, the World Wide Web, or the Web, is only one of a large number of Internet services. It is the global collection of web pages, documents and other web resources linked by hyperlinks and URLs. == History == === 1960s === In the 1960s, computer scientists began developing systems for time-sharing of computer resources. J. C. R. Licklider proposed the idea of a universal network while working at Bolt Beranek & Newman and, later, leading the Information Processing Techniques Office at the Advanced Research Projects Agency (ARPA) of the United States Department of Defense. Research into packet switching, one of the fundamental Internet technologies, started in the work of Paul Baran at RAND in the early 1960s and, independently, Donald Davies at the United Kingdom's National Physical Laboratory in 1965. After the Symposium on Operating Systems Principles in 1967, packet switching from the proposed NPL network was incorporated into the design of the ARPANET, an experimental resource sharing network proposed by ARPA. ARPANET development began with two network nodes which were interconnected between the University of California, Los Angeles and the Stanford Research Institute on 29 October 1969. The third site was at the University of California, Santa Barbara, followed by the University of Utah. === 1970s === By the end of 1971, 15 sites were connected to the young ARPANET. Thereafter, the ARPANET gradually developed into a decentralized communications network, connecting remote centers and military bases in the United States. Other user networks and research networks, such as the Merit Network and CYCLADES, were developed in the late 1960s and early 1970s. Early international collaborations for the ARPANET were rare. Connections were made in 1973 to Norway (NORSAR and, later, NDRE) and to Peter Kirstein's research group at University College London, which provided a gateway to British academic networks, the first internetwork for resource sharing. ARPA projects, the International Network Working Group and commercial initiatives led to the development of various protocols and standards by which multiple separate networks could become a single network, or a network of networks. In 1974, Vint Cerf at Stanford University and Bob Kahn at DARPA published a proposal for "A Protocol for Packet Network Intercommunication". Cerf and his graduate students used the term internet as a shorthand for internetwork in RFC 675. The Internet Experiment Notes and later RFCs repeated this use. The work of Louis Pouzin and Robert Metcalfe had important influences on the resulting TCP/IP design. National PTTs and commercial providers developed the X.25 standard and deployed it on public data networks. === 1980s === The ARPANET initially served as a backbone for the interconnection of regional academic and military networks in the United States to enable resource sharing. Access to the ARPANET was expanded in 1981 when the National Science Foundation (NSF) funded the Computer Science Network (CSNET). In 1982, the Internet Protocol Suite (TCP/IP) was standardized, which facilitated worldwide proliferation of interconnected networks. TCP/IP network access expanded again in 1986 when the National Science Foundation Network (NSFNet) provided access to supercomputer sites in the United States for researchers, first at speeds of 56 kbit/s and later at 1.5 Mbit/s and 45 Mbit/s. The NSFNet expanded into academic and research organizations in Europe, Australia, New Zealand and Japan in 1988–89. Although other network protocols such as UUCP and PTT public data networks had global reach well before this time, this marked the beginning of the Internet as an intercontinental network. Commercial Internet service providers emerged in 1989 in the United States and Australia. The ARPANET was decommissioned in 1990. === 1990s === The linking of commercial networks and enterprises by the early 1990s, as well as the advent of the World Wide Web, marked the beginning of the transition to the modern Internet. Steady advances in semiconductor technology and optical networking created new economic opportunities for commercial involvement in the expansion of the network in its core and for delivering services to the public. In mid-1989, MCI Mail and Compuserve established connections to the Internet, delivering email and public access products to the half million users of the Internet. Just months later, on 1 January 1990, PSInet launched an alternate Internet backbone for commercial use; one of the networks that added to the core of the commercial Internet of later years. In March 1990, the first high-speed T1 (1.5 Mbit/s) link between the NSFNET and Europe was installed between Cornell University and CERN, allowing much more robust communications than were capable with satellites. Later in 1990, Tim Berners-Lee began writing WorldWideWeb, the first web browser, after two years of lobbying CERN management. By Christmas 1990, Berners-Lee had built all the tools necessary for a working Web: the HyperText Transfer Protocol (HTTP) 0.9, the HyperText Markup Language (HTML), the first Web browser (which was also an HTML editor and could access Usenet newsgroups and FTP files), the first HTTP server software (later known as CERN httpd), the first web server, and the first Web pages that described the project itself. In 1991 the

  Read more →
• 

  What I eat in a day video

  "What I eat in a day" videos are a trend on several social media platforms where a person describes all the meals and snacks that they eat during a given day, often as part of a given diet. The videos, shared on platforms including Twitter, TikTok and YouTube, become increasingly popular in 2020, with some of them accumulating millions of views, and they are considered a profitable industry for the people making them. Some have raised concerns that the videos may promote an unrealistic standard for healthy eating and contribute to the development of eating disorders. == Format == These videos often feature a montage of the food that the creator eats over the course of the day, sometimes with the associated calorie count of the foods that they describe. Unlike related mukbang videos, however, in which participants eat large amounts of food, the diets described are often restrictive. However, other videos are labeled as "unhealthy" and depict large portion sizes and higher amounts of processed food. == Popularity == "What I eat in a day" videos have existed for a long time, especially on YouTube, but they have become much more widespread in recent years. This phenomenon is self-reinforcing because when social media users watch or like these videos they are likely to see more of them in the future. Indeed, some of the most successful videos have tens of millions of view each. == Criticism and controversy == Several dieticians and mental health professionals over the impacts that these videos can have, as they can advocate a restrictive style of eating and not "promote body diversity." They have also raised concerns that this trend could contribute to a rise in disordered eating, especially since use of social media is known to increase feelings of negative body image. This trend is particularly prevalent among young adults, which are also the group with the highest vulnerability to eating disorders. More recently, a portion of these videos have begun to challenge diets and depict more realistic ways of eating in order to reduce the potential consequences of the trend.

  Read more →
• 

  Exposure Notification

  The (Google/Apple) Exposure Notification System (GAEN) is a framework and protocol specification developed by Apple Inc. and Google to facilitate digital contact tracing during the COVID-19 pandemic. When used by health authorities, it augments more traditional contact tracing techniques by automatically logging close approaches among notification system users using Android or iOS smartphones. Exposure Notification is a decentralized reporting protocol built on a combination of Bluetooth Low Energy technology and privacy-preserving cryptography. It is an opt-in feature within COVID-19 apps developed and published by authorized health authorities. Unveiled on April 10, 2020, it was made available on iOS on May 20, 2020, as part of the iOS 13.5 update and on December 14, 2020, as part of the iOS 12.5 update for older iPhones. On Android, it was added to devices via a Google Play Services update, supporting all versions since Android Marshmallow. The Apple/Google protocol is similar to the Decentralized Privacy-Preserving Proximity Tracing (DP-3T) protocol created by the European DP-3T consortium and the Temporary Contact Number (TCN) protocol by Covid Watch, but is implemented at the operating system level, which allows for more efficient operation as a background process. Since May 2020, a variant of the DP-3T protocol is supported by the Exposure Notification Interface. Other protocols are constrained in operation because they are not privileged over normal apps. This leads to issues, particularly on iOS devices where digital contact tracing apps running in the background experience significantly degraded performance. The joint approach is also designed to maintain interoperability between Android and iOS devices, which constitute nearly all of the market. The ACLU stated the approach "appears to mitigate the worst privacy and centralization risks, but there is still room for improvement". In late April, Google and Apple shifted the emphasis of the naming of the system, describing it as an "exposure notification service", rather than "contact tracing" system. == Technical specification == Digital contact tracing protocols typically have two major responsibilities: encounter logging and infection reporting. Exposure Notification only involves encounter logging which is a decentralized architecture. The majority of infection reporting is centralized in individual app implementations. To handle encounter logging, the system uses Bluetooth Low Energy to send tracking messages to nearby devices running the protocol to discover encounters with other people. The tracking messages contain unique identifiers that are encrypted with a secret daily key held by the sending device. These identifiers change every 15–20 minutes as well as Bluetooth MAC address in order to prevent tracking of clients by malicious third parties through observing static identifiers over time. The sender's daily encryption keys are generated using a random number generator. Devices record received messages, retaining them locally for 14 days. If a user tests positive for infection, the last 14 days of their daily encryption keys can be uploaded to a central server, where it is then broadcast to all devices on the network. The method through which daily encryption keys are transmitted to the central server and broadcast is defined by individual app developers. The Google-developed reference implementation calls for a health official to request a one-time verification code (VC) from a verification server, which the user enters into the encounter logging app. This causes the app to obtain a cryptographically signed certificate, which is used to authorize the submission of keys to the central reporting server. The received keys are then provided to the protocol, where each client individually searches for matches in their local encounter history. If a match meeting certain risk parameters is found, the app notifies the user of potential exposure to the infection. Google and Apple intend to use the received signal strength (RSSI) of the beacon messages as a source to infer proximity. RSSI and other signal metadata will also be encrypted to resist deanonymization attacks. === Version 1.0 === To generate encounter identifiers, first a persistent 32-byte private Tracing Key ( t k {\displaystyle tk} ) is generated by a client. From this a 16 byte Daily Tracing Key is derived using the algorithm d t k i = H K D F ( t k , N U L L , 'CT-DTK' | | D i , 16 ) {\displaystyle dtk_{i}=HKDF(tk,NULL,{\text{'CT-DTK'}}||D_{i},16)} , where H K D F ( Key, Salt, Data, OutputLength ) {\displaystyle HKDF({\text{Key, Salt, Data, OutputLength}})} is a HKDF function using SHA-256, and D i {\displaystyle D_{i}} is the day number for the 24-hour window the broadcast is in starting from Unix Epoch Time. These generated keys are later sent to the central reporting server should a user become infected. From the daily tracing key a 16-byte temporary Rolling Proximity Identifier is generated every 10 minutes with the algorithm R P I i , j = Truncate ( H M A C ( d t k i , 'CT-RPI' | | T I N j ) , 16 ) {\displaystyle RPI_{i,j}={\text{Truncate}}(HMAC(dtk_{i},{\text{'CT-RPI'}}||TIN_{j}),16)} , where H M A C ( Key, Data ) {\displaystyle HMAC({\text{Key, Data}})} is a HMAC function using SHA-256, and T I N j {\displaystyle TIN_{j}} is the time interval number, representing a unique index for every 10 minute period in a 24-hour day. The Truncate function returns the first 16 bytes of the HMAC value. When two clients come within proximity of each other they exchange and locally store the current R P I i , j {\displaystyle RPI_{i,j}} as the encounter identifier. Once a registered health authority has confirmed the infection of a user, the user's Daily Tracing Key for the past 14 days is uploaded to the central reporting server. Clients then download this report and individually recalculate every Rolling Proximity Identifier used in the report period, matching it against the user's local encounter log. If a matching entry is found, then contact has been established and the app presents a notification to the user warning them of potential infection. === Version 1.1 === Unlike version 1.0 of the protocol, version 1.1 does not use a persistent tracing key, rather every day a new random 16-byte Temporary Exposure Key ( t e k i {\displaystyle tek_{i}} ) is generated. This is analogous to the daily tracing key from version 1.0. Here i {\displaystyle i} denotes the time is discretized in 10 minute intervals starting from Unix Epoch Time. From this two 128-bit keys are calculated, the Rolling Proximity Identifier Key ( R P I K i {\displaystyle RPIK_{i}} ) and the Associated Encrypted Metadata Key ( A E M K i {\displaystyle AEMK_{i}} ). R P I K i {\displaystyle RPIK_{i}} is calculated with the algorithm R P I K i = H K D F ( t e k i , N U L L , 'EN-RPIK' , 16 ) {\displaystyle RPIK_{i}=HKDF(tek_{i},NULL,{\text{'EN-RPIK'}},16)} , and A E M K i {\displaystyle AEMK_{i}} using the algorithm A E M K i = H K D F ( t e k i , N U L L , 'EN-AEMK' , 16 ) {\displaystyle AEMK_{i}=HKDF(tek_{i},NULL,{\text{'EN-AEMK'}},16)} . From these values a temporary Rolling Proximity Identifier ( R P I i , j {\displaystyle RPI_{i,j}} ) is generated every time the BLE MAC address changes, roughly every 15–20 minutes. The following algorithm is used: R P I i , j = A E S 128 ( R P I K i , 'EN-RPI' | | 0 x 000000000000 | | E N I N j ) {\displaystyle RPI_{i,j}=AES128(RPIK_{i},{\text{'EN-RPI'}}||{\mathtt {0x000000000000}}||ENIN_{j})} , where A E S 128 ( Key, Data ) {\displaystyle AES128({\text{Key, Data}})} is an AES cryptography function with a 128-bit key, the data is one 16-byte block, j {\displaystyle j} denotes the Unix Epoch Time at the moment the roll occurs, and E N I N j {\displaystyle ENIN_{j}} is the corresponding 10-minute interval number. Next, additional Associated Encrypted Metadata is encrypted. What the metadata represents is not specified, likely to allow the later expansion of the protocol. The following algorithm is used: Associated Encrypted Metadata i , j = A E S 128 _ C T R ( A E M K i , R P I i , j , Metadata ) {\displaystyle {\text{Associated Encrypted Metadata}}_{i,j}=AES128\_CTR(AEMK_{i},RPI_{i,j},{\text{Metadata}})} , where A E S 128 _ C T R ( Key, IV, Data ) {\displaystyle AES128\_CTR({\text{Key, IV, Data}})} denotes AES encryption with a 128-bit key in CTR mode. The Rolling Proximity Identifier and the Associated Encrypted Metadata are then combined and broadcast using BLE. Clients exchange and log these payloads. Once a registered health authority has confirmed the infection of a user, the user's Temporary Exposure Keys t e k i {\displaystyle tek_{i}} and their respective interval numbers i {\displaystyle i} for the past 14 days are uploaded to the central reporting server. Clients then download this report and individually recalculate every Rolling Proximity Identifier starting from interval number i {\displaystyle i} ,

  Read more →
• 

  Campus network

  A campus network, campus area network, corporate area network or CAN is a computer network made up of an interconnection of local area networks (LANs) within a limited geographical area. The networking equipments (switches, routers) and transmission media (optical fiber, copper plant, Cat5 cabling etc.) are almost entirely owned by the campus tenant / owner: an enterprise, university, government etc. A campus area network is larger than a local area network but smaller than a metropolitan area network (MAN) or wide area network (WAN). == University campuses == College or university campus area networks often interconnect a variety of buildings, including administrative buildings, academic buildings, laboratories, university libraries, or student centers, residence halls, gymnasiums, and other outlying structures, like conference centers, technology centers, and training institutes. Early examples include the Stanford University Network at Stanford University, Project Athena at MIT, and the Andrew Project at Carnegie Mellon University. == Corporate campuses == Much like a university campus network, a corporate campus network serves to connect buildings. Examples of such are the networks at Googleplex and Microsoft's campus. Campus networks are normally interconnected with high speed Ethernet links operating over optical fiber such as gigabit Ethernet and 10 Gigabit Ethernet. == Area range == The range of CAN is 1 to 5 km (1 to 3 mi). If two buildings have the same domain and they are connected with a network, then it will be considered as CAN only. Though the CAN is mainly used for corporate campuses so the link will be high speed.

  Read more →
• 

  Influencer

  An influencer is an individual who has the capacity to shape the attitudes, behavior, or decisions of others through authority, knowledge, position, or the nature of the relationship with the audience. The term is used in various fields such as media, business, politics, religion, and communication, referring to influencers such as social media influencers, podcasters, public speakers, religious influencers, writers, and newsletter writers etc who have dedicated followings in various areas. One writer defines influencers as "a range of third parties who exercise influence over the organization and its potential customers." Another writer defines an influencer as a "third party who significantly shapes the customer's purchasing decision but may never be accountable for it." According to another writer, influencers are "well-connected, create an impact, have active minds, and are trendsetters". Just because a person has many followers does not necessarily mean they have much influence over those people. In contemporary usage, the term frequently refers to a social media influencer, (also known as an online influencer or simply influencer) a person who builds a grassroots online presence through engaging content such as photos, videos, and updates. This is done by using direct audience interaction to establish authenticity, expertise, and appeal, and by standing apart from traditional celebrities by growing their platform through social media rather than pre-existing fame. The modern referent of the term is commonly a paid role in which a business entity pays for the social media influence-for-hire activity to promote its products and services, known as influencer marketing. A 1% increase in spending on influencer marketing can lead to a 0.5% increase in audience engagement. As such, an influencer effectively acts as a modern salesperson or a marketer. Types of influencers include fashion influencer, travel influencer, and virtual influencer, and they involve content creators and streamers. Some influencers are associated primarily with specific social media apps such as TikTok, Instagram, or Pinterest; many influencers are also considered internet celebrities. As of 2023, Instagram is the social media platform businesses spend the most advertising money towards marketing with influencers. However, influencers can have an impact on any social media network. == History == === Origins === The word influencer in its general sense of a person or thing that exerts influence, is attested in historical sources at least since the 17th century. The Oxford English Dictionary (OED) gives 1664 as the earliest example of usage and cites a sentence from Henry More's A Modest Enquiry into the Mystery of Iniquity: "The head and influencer of the whole Church". The origins of online influencing can be traced back to the emergence of digital blogs and platforms in the early 2000s. Nevertheless, recent studies demonstrate that Instagram, an application with more than one billion users, harbors the majority of the influencer demographic. These individuals are sometimes referred to as "Instagrammers" or "Instafamous". A crucial aspect of influencing is their association with sponsors. The 2015 debut of Vamp, a company that links influencers with sponsorships, transformed the landscape of influencing. There is much debate about whether social media influencers can be considered celebrities, as their path to fame is often less traditional and arguably easier. Melody Nouri addressed the differences between the two types in her article "The Power of Influence: Traditional Celebrities vs Social Media Influencer". Nouri asserts that social media platforms have a greater negative impact on young, impressionable audiences in comparison with traditional media such as magazines, billboards, advertisements, and tabloids featuring celebrities. Online, it is thought to be simpler to manipulate an image and lifestyle in such a way that viewers are more susceptible to believing it. One theory considers the former American First Lady Eleanor Roosevelt (1884–1962) to be the "original media influencer." While she achieved celebrity in her role as First Lady, she built a global personal brand as a wise, informative, trustworthy American woman. Her voice was her own, unrestricted by political advisors and powerful men, and with it, Roosevelt exerted unprecedented social and cultural influence in radio, print, public speaking, film, and television until she died. In one notable example, it may have been Roosevelt's television support of John F. Kennedy which nudged his "hairline victory" during the 1960 Presidential campaign. In another example, David Ogilvy paid Roosevelt more than a quarter of a million dollars in today's currency to make a TV commercial for Good Luck margarine (1959), in which Roosevelt also managed to mention world hunger. As a content creator, she wrote My Day, a popular daily newspaper column that ran nationwide for twenty-six years. Like a social media post, My Day covered all aspects of her life, and in it Roosevelt often recommended movies, books, and products that she admired. Roosevelt also had a hand in designing all three of her public affairs television shows. Unlike contemporary influencers, she was less motivated by a pay-to-play situation than by a desire to educate and inspire; but she did use her influence to benefit the entertainment industry careers of her children, and she welcomed the revenue that her influence bought, most of which was donated to charity. === 2000s === The early 2000s showed corporate endeavors to leverage the internet for influence, with some companies participating in forums for promotions or providing bloggers with complimentary products in return for favorable reviews. A few of these practices were viewed as unethical for taking advantage of the labor of young individuals without providing remuneration. In 2004, The Blogstar Network was established by Ted Murphy of MindComet. Bloggers were encouraged to join an email list and receive remunerated offers from corporations in exchange for creating specific posts. For instance, bloggers were compensated for writing reviews of fast-food meals on their blogs. Blogstar is widely regarded as the first influencer marketing network. Murphy succeeded Blogstar with PayPerPost, which was introduced in 2006. This platform compensated significant posters on prominent forums and social media platforms for every post made about a corporate product. Payment rates were determined by the influencer's status. Though very popular, PayPerPost, received a great deal of criticism as these influencers were not required to disclose their involvement with PayPerPost as traditional journalism would have. With the success of PayPerPost, the public became aware that there was a drive for corporate interests to influence what some people were posting to these sites. The platform also incentivized other firms to establish comparable programs. Despite concerns, marketing networks with influencers continued to grow throughout the 2000s and into the 2010s. The influencer marketing industry was worth as much as $8 billion in 2019, according to estimates from Business Insider Intelligence, which are based on Mediakix data. Evan Asano, the Former CEO and founder of the agency Mediakix, previously spoke with Business Insider and said he believed influencer marketing on Instagram would continue to grow despite likes being hidden. === 2010s === By the 2010s, the term "influencer" described digital content creators with a large following, distinctive brand persona, and a patterned relationship with commercial sponsors. By this period, influencer marketing had become a widely researched field globally, with systematic reviews drawing on hundreds of studies that documented the growing role of authenticity, audience engagement, and parasocial relationships in shaping how consumers responded to influencer content across different markets. During this period, influencer culture also developed through distinct channels outside Western markets. In South Korea, the global spread of Korean pop culture, also called K-Pop, through platforms such as YouTube, Facebook, and Twitter gave rise to what scholars have called 'Hallyu 2.0' or the 'New Korean Wave', where fans throughout Southeast Asia, North America, Latin America, and Europe shared, subtitled, and redistributed Korean music and film content on a large scale. This helped Korean entertainers to build substantial followings internationally. Consumers often mistakenly view celebrities as reliable, leading to trust and confidence in the products being promoted. A 2001 study from Rutgers University discovered that individuals were using "internet forums as influential sources of consumer information." The study proposes that consumers preferred internet forums and social media when making purchasing decisions over conventional advertising and print sources. An in

  Read more →
• 

  Blacker (security)

  Blacker (styled BLACKER) is a U.S. Department of Defense computer network security project designed to achieve A1 class ratings (very high assurance) of the Trusted Computer System Evaluation Criteria (TCSEC). The first Blacker program began in the late 1970s, with a follow-on eventually producing fielded devices in the late 1980s. It was the first secure system with trusted end-to-end encryption on the United States' Defense Data Network. The project was implemented by SDC (software), and Burroughs (hardware), and after their merger, by the resultant company Unisys.

  Read more →
• 

  PagedAttention

  PagedAttention is an attention algorithm for efficient serving of large language models (LLMs). It was introduced in 2023 by Woosuk Kwon and colleagues in the paper Efficient Memory Management for Large Language Model Serving with PagedAttention, alongside the vLLM serving engine. The method stores the key–value cache used during autoregressive decoding in fixed-size blocks that can be mapped to non-contiguous physical memory, borrowing ideas from virtual memory, paging, and operating system design. == Background == In transformer inference, the key–value cache grows with sequence length and the number of concurrent requests. Kwon et al. argued that earlier serving systems typically reserved contiguous cache regions in advance, which caused reserved space, internal fragmentation, and external fragmentation. In their experiments, the paper reported that the effective memory utilization of previous systems could fall as low as 20.4%. == Description == PagedAttention partitions the cache of each sequence into fixed-size KV blocks. A request's cache is represented as a sequence of logical blocks, while a block table maps those logical blocks to physical GPU-memory blocks. As a result, neighboring logical blocks do not need to be contiguous in physical memory, and new blocks can be allocated on demand as generation proceeds. The design also makes it easier to share cache state across related decoding paths. In vLLM, physical blocks can be reference-counted and shared among requests or branches, with block-granularity copy-on-write used when a shared block must be modified. The original paper applied this design to parallel sampling, beam search, and prompts with shared prefixes. == Mathematical formulation == For a query token i {\displaystyle i} in causal self-attention, the standard attention output can be written as a i j = exp ⁡ ( q i ⊤ k j / d ) ∑ t = 1 i exp ⁡ ( q i ⊤ k t / d ) , o i = ∑ j = 1 i a i j v j {\displaystyle a_{ij}={\frac {\exp(\mathbf {q} _{i}^{\top }\mathbf {k} _{j}/{\sqrt {d}})}{\sum _{t=1}^{i}\exp(\mathbf {q} _{i}^{\top }\mathbf {k} _{t}/{\sqrt {d}})}},\;\mathbf {o} _{i}=\sum _{j=1}^{i}a_{ij}\mathbf {v} _{j}} where q i {\displaystyle \mathbf {q} _{i}} , k j {\displaystyle \mathbf {k} _{j}} , and v j {\displaystyle \mathbf {v} _{j}} are the query, key, and value vectors, and d {\displaystyle d} is the attention dimension. If the cache is partitioned into blocks of size B {\displaystyle B} , the key and value blocks may be written as K j = ( k ( j − 1 ) B + 1 , … , k j B ) , V j = ( v ( j − 1 ) B + 1 , … , v j B ) {\displaystyle \mathbf {K} _{j}=(\mathbf {k} _{(j-1)B+1},\ldots ,\mathbf {k} _{jB}),\;\mathbf {V} _{j}=(\mathbf {v} _{(j-1)B+1},\ldots ,\mathbf {v} _{jB})} PagedAttention then performs the computation blockwise: A i j = exp ⁡ ( q i ⊤ K j / d ) ∑ t = 1 ⌈ i / B ⌉ exp ⁡ ( q i ⊤ K t / d ) , o i = ∑ j = 1 ⌈ i / B ⌉ V j A i j ⊤ {\displaystyle \mathbf {A} _{ij}={\frac {\exp(\mathbf {q} _{i}^{\top }\mathbf {K} _{j}/{\sqrt {d}})}{\sum _{t=1}^{\lceil i/B\rceil }\exp(\mathbf {q} _{i}^{\top }\mathbf {K} _{t}/{\sqrt {d}})}},\;\mathbf {o} _{i}=\sum _{j=1}^{\lceil i/B\rceil }\mathbf {V} _{j}\mathbf {A} _{ij}^{\top }} where A i j {\displaystyle \mathbf {A} _{ij}} is the vector of attention scores for the j {\displaystyle j} -th KV block. In the formulation given by Kwon et al., this preserves the causal attention calculation while allowing the key and value blocks to reside in non-contiguous physical memory. == Performance and use == The vLLM paper reported that, on its evaluated workloads, the use of PagedAttention and the associated memory-management design improved serving throughput by 2–4× over the compared baselines, including FasterTransformer and Orca, while preserving model outputs. In experiments on OPT-13B with the Alpaca trace, the paper also reported memory savings of 6.1–9.8% for parallel sampling and 37.6–55.2% for beam search through KV-block sharing. A 2024 survey of LLM serving systems described PagedAttention as having become an industry norm in LLM serving frameworks, citing support in TGI, vLLM, and TensorRT-LLM. == Limitations and alternatives == Subsequent work has described trade-offs in the approach. The 2025 vAttention paper argued that PagedAttention requires attention kernels to be rewritten to support paging and increases software complexity, portability issues, redundancy, and execution overhead, proposing instead a memory manager that keeps the cache contiguous in virtual memory while relying on demand paging for physical allocation. === vAttention === Unlike PagedAttention, vAttention does not introduce a different attention rule; it retains the standard attention computation Attention ⁡ ( q i , K , V ) = softmax ⁡ ( q i K ⊤ s c a l e ) V . {\displaystyle \operatorname {Attention} (q_{i},K,V)=\operatorname {softmax} \left({\frac {q_{i}K^{\top }}{\mathrm {scale} }}\right)V.} In the notation of Prabhu et al., the key and value tensors for a request seen so far are K , V ∈ R L ′ × ( H × D ) {\displaystyle K,V\in \mathbb {R} ^{L'\times (H\times D)}} , where L ′ {\displaystyle L'} is the context length seen so far, H {\displaystyle H} is the number of KV heads on a worker, and D {\displaystyle D} is the dimension of each KV head. In systems prior to PagedAttention, the K cache (or V cache) at each layer of a worker is typically allocated as a 4D tensor of shape [ B , L , H , D ] , {\displaystyle [B,L,H,D],} where B {\displaystyle B} is batch size and L {\displaystyle L} is the maximum context length supported by the model. vAttention preserves this contiguous virtual-memory view while deferring physical-memory allocation to runtime. A serving framework maintains separate K and V tensors for each layer, so vAttention reserves 2 N {\displaystyle 2N} virtual-memory buffers on a worker, where N {\displaystyle N} is the number of layers managed by that worker. The maximum size of one virtual-memory buffer is B S = B × S , {\displaystyle BS=B\times S,} where S {\displaystyle S} is the maximum size of a single request's per-layer K cache (or V cache) on a worker. The paper defines S = L × H × D × P , {\displaystyle S=L\times H\times D\times P,} where P {\displaystyle P} is the number of bytes needed to store one element. In this formulation, vAttention keeps the KV cache contiguous in virtual memory and relies on demand paging for physical allocation, rather than modifying the attention kernel to operate over non-contiguous KV-cache blocks.

  Read more →
• 

  Conditional disclosure of secrets

  Conditional disclosure of secrets (CDS) is a primitive, studied in information-theoretic cryptography, that allows distributed, non-communicating parties to coordinate the release of information to a third party. CDS was initially introduced for use in the context of private information retrieval, and has been related to communication complexity and non-local quantum computation. == Definition of conditional disclosure of secrets == The conditional disclosure of secrets setting involves three players; Alice, Bob and the referee. Alice receives an input x ∈ { 0 , 1 } n {\displaystyle x\in \{0,1\}^{n}} and a secret z ∈ { 0 , 1 } {\displaystyle z\in \{0,1\}} , and Bob receives a string y ∈ { 0 , 1 } n {\displaystyle y\in \{0,1\}^{n}} . A choice of Boolean function f : { 0 , 1 } 2 n → { 0 , 1 } {\displaystyle f:\{0,1\}^{2n}\rightarrow \{0,1\}} is fixed in advance and known to all players. Alice and Bob cannot communicate with one another, but share a string of random bits which we label r {\displaystyle r} . Alice and Bob compute messages m A = m A ( x , z , r ) {\displaystyle m_{A}=m_{A}(x,z,r)} and m B = m B ( y , r ) {\displaystyle m_{B}=m_{B}(y,r)} , which they send to the referee. The referee knows ( x , y ) {\displaystyle (x,y)} . A CDS protocol consists of the encoding maps applied by Alice and Bob. A protocol is said to be ϵ {\displaystyle \epsilon } -correct if, for all ( x , y ) ∈ f − 1 ( 1 ) {\displaystyle (x,y)\in f^{-1}(1)} , the referee can determine z {\displaystyle z} with probability 1 − ϵ {\displaystyle 1-\epsilon } . A protocol is said to be δ {\displaystyle \delta } -secure if, for all ( x , y ) ∈ f − 1 ( 0 ) {\displaystyle (x,y)\in f^{-1}(0)} the distribution of the messages is δ {\displaystyle \delta } close to a simulator distribution (in total variation distance), where the simulator distribution is independent of z {\displaystyle z} . The communication complexity of a CDS protocol P is the total number of bits of message sent by Alice and Bob. The CDS communication cost of a function, C D S ϵ , δ ( f ) {\displaystyle CDS_{\epsilon ,\delta }(f)} is the minimal communication cost of an ϵ {\displaystyle \epsilon } -correct, δ {\displaystyle \delta } secure protocol that implements f {\displaystyle f} . The randomness complexity and randomness cost of implementing a function in the CDS model are defined similarly, but consider the number of bits of shared random bits held by Alice and Bob. == Basic properties of the primitive == === Amplification === Supposing we have an ϵ {\displaystyle \epsilon } -correct and δ {\displaystyle \delta } -secure CDS protocol, it is known that we can find a new protocol which reduces the correctness and privacy errors at the expense of an increased communication and randomness cost. More specifically, the following theorem has been proven Theorem (Amplification). A CDS protocol for f which supports a single-bit secret with privacy and correctness error of 1/3 can be transformed into a new CDS protocol with privacy and correctness error of 2 − Ω ( k ) {\displaystyle 2^{-\Omega (k)}} and communication/randomness complexity which are larger than those of the original protocol by a multiplicative factor of O(k). In fact, somewhat more than the above theorem is true in that the size of the secret can also be made to be of length k {\displaystyle k} , while simultaneously reducing the correctness and privacy errors as above. The proof involves first encoding the secret z {\displaystyle z} into a secret sharing scheme, and then running the original CDS protocol on each share of the resulting scheme. === Closure === If a CDS protocol for a function f {\displaystyle f} is known, then certain simple modifications of f {\displaystyle f} have CDS protocols with similar efficiency. The simplest case is to consider a CDS protocol for function f {\displaystyle f} and ask for a similarly efficient protocol for the negation of f {\displaystyle f} , labelled ¬ f {\displaystyle \neg f} . This is addressed by the following theorem Theorem (CDS is closed under complement). Suppose that f has a CDS protocol with randomness cost of ρ {\displaystyle \rho } bits, communication complexity of t {\displaystyle t} bits, and privacy and correctness errors δ = ϵ = 2 − k {\displaystyle \delta =\epsilon =2^{-k}} . Then ¬ f {\displaystyle \neg f} has a CDS scheme with similar privacy and correctness errors, and randomness and communication complexity of O ( k 3 ρ 2 t + k 3 ρ 3 ) {\displaystyle O(k^{3}\rho ^{2}t+k^{3}\rho ^{3})} . The cost of a CDS protocol is also closed under formula's, in the following sense. Consider two functions f 1 {\displaystyle f_{1}} and f 2 {\displaystyle f_{2}} . Then, the communication and randomness costs of f 1 ∧ f 2 {\displaystyle f_{1}\wedge f_{2}} as well as f 1 ∨ f 2 {\displaystyle f_{1}\vee f_{2}} are not much larger than the sum of the costs for f 1 {\displaystyle f_{1}} and f 2 {\displaystyle f_{2}} . See Applebaum et al. for a precise statement. == Upper and lower bounds on communication cost == Given a function f {\displaystyle f} we would like to understand the communication and randomness costs to implement f {\displaystyle f} in the CDS setting. Towards understanding this, protocols for implementing CDS have been developed (which give an upper bound on the cost) and lower bound strategies have been developed. For most functions, there is a large gap between the known upper and lower bound, so understanding the cost of CDS remains largely an open problem. This section presents some of what is known so far about the cost of CDS. === Secret sharing based upper bound === A subject with a close relationship to CDS is secret sharing. Secret sharing constructions provide an upper bound on the cost of CDS protocols. A secret sharing scheme encodes a secret, s {\displaystyle s} into a set of shares S 1 , . . . , S n {\displaystyle S_{1},...,S_{n}} . Associated to any secret sharing scheme is an access structure, which consists of a set of authorized sets A = A 1 , . . . , A k {\displaystyle {\mathcal {A}}={A_{1},...,A_{k}}} with A i ⊆ { S 1 , . . . , S n } {\displaystyle A_{i}\subseteq \{S_{1},...,S_{n}\}} . The authorized sets are those subsets of the A i {\displaystyle A_{i}} from which it is possible to recover the secret recorded into the scheme. A succinct way to describe an access structure is in terms of a function f A : { 0 , 1 } n → { 0 , 1 } {\displaystyle f_{\mathcal {A}}:\{0,1\}^{n}\rightarrow \{0,1\}} . Each subset of the shares K [ x ] ⊂ { S 1 , . . . , S n } {\displaystyle K[x]\subset \{S_{1},...,S_{n}\}} is labelled by a string x ∈ { 0 , 1 } n {\displaystyle x\in \{0,1\}^{n}} such that x i = 1 {\displaystyle x_{i}=1} if and only if S i ∈ K {\displaystyle S_{i}\in K} . Then we define f A {\displaystyle f_{\mathcal {A}}} to be such that f A ( x ) = 1 {\displaystyle f_{\mathcal {A}}(x)=1} if and only if K [ x ] ∈ A {\displaystyle K[x]\in {\mathcal {A}}} . In words, the function f A {\displaystyle f_{\mathcal {A}}} is 1 when given an authorized subset as input, and 0 otherwise. A basic result in the theory of secret sharing is that an access structure A {\displaystyle {\mathcal {A}}} can be realized in a secret sharing scheme if and only if f A {\displaystyle f_{\mathcal {A}}} is monotone. The size of a secret sharing scheme is defined as the total number of bits in the shares S i {\displaystyle S_{i}} . For monotone functions, there is an upper bound on the communication cost in CDS for any monotone function f {\displaystyle f} in terms of the size of any secret sharing scheme with access structure given by f {\displaystyle f} , C D S ϵ = 0 , δ = 0 ( f ) ≤ S h a r i n g S i z e ( f ) {\displaystyle CDS_{\epsilon =0,\delta =0}(f)\leq SharingSize(f)} For some concrete classes of secret sharing schemes, this relationship can be extended to general (non-monotone) Boolean functions. This leads to an upper bound on CDS cost in terms of the size of any span program that computes f {\displaystyle f} , C D S ϵ = 0 , δ = 0 ( f ) ≤ S P k ( f ) {\displaystyle CDS_{\epsilon =0,\delta =0}(f)\leq SP_{k}(f)} The class of problems with efficient (polynomial size) span program is the complexity class M o d k L {\displaystyle Mod_{k}L} , so problems in this class have efficient CDS protocols. === Sub-exponential upper bounds for all functions === Using a matching vector family based construction, it has been proven that ∀ f , C D S ϵ = 0 , δ = 0 ( f ) ≤ 2 O ( n log ⁡ n ) {\displaystyle \forall f,\,\,\,\,\,\,CDS_{\epsilon =0,\delta =0}(f)\leq 2^{O({\sqrt {n\log n}})}} . The technique for this proof is similar to one used to prove upper bounds on private information retrieval. This upper bound on CDS also leads to sub-exponential upper bounds on the size of a large class of secret sharing schemes. === Lower bounds from communication complexity === In a CDS protocol, the referee is given the inputs ( x , y ) {\displaystyle (x,y)} . This means it is not clear if the messages sent by Alice a

  Read more →
• 

  Upworthy

  Upworthy is a media brand that focuses on positive storytelling. It was started in March 2012 by Eli Pariser, the former executive director of MoveOn, and Peter Koechley, the former managing editor of The Onion. One of Facebook's co-founders, Chris Hughes, was an early investor. At its peak between 2012 and 2014, it reached up to 100 million people a month. In 2017, the company was acquired by Good Worldwide. == History == Upworthy was launched in 2012 with a focus on aggregating positive content, which aligned with Facebook's algorithm. Originally, Upworthy curators searched the internet for existing content to feature on the site. Once selected as an option, curators brainstormed different headlines and shareable images for the content, and tested it with a small sample of Upworthy's visitors before sharing it on the site. The site popularized a clickbait style of two-phrase headlines. The company simplifies issues that are controversial by nature, which are presented from a politically liberal point of view and are heavily fact-checked for accuracy. In June 2013, an article in Fast Company called Upworthy "the fastest growing media site of all time". It had 8.7 million unique monthly visitors in the first six months, and in November 2013, had a high of 87 million unique visitors in a single month. In 2013, Facebook changed its algorithm, leading to a significant decline in readers from that platform. Upworthy fired one round of writers in 2015, and another in 2016, after an unionization effort by some of the staff. The union involved, the Writers Guild of America, East, has organized several online "viral" news publishers. In January 2017, Upworthy was acquired by media company GOOD Worldwide. The newsrooms of the two organizations would merge as part of the acquisition. About 20 staffers were laid off as part of the merger. In March 2020, Upworthy saw a 65% increase in Instagram followers and a 47% increased interest in positive content on-site page views as a result of increased interest in positive content during the COVID-19 pandemic. In January 2023, National Geographic Books bought Good People: Stories From the Best of Humanity from Upworthy, with a publication date of September 3, 2024. The book is described as "a heartwarming collection of first-person tales that will provide comfort and inspiration to anyone who could use a little dose of joy right now". It was created by two senior Upworthy team members, Gabriel Reilich and Lucia Knell, and features 101 stories from Upworthy's audience. The co-creators encouraged Upworthy followers to connect with the brand through questions on their posts, opening the door for organic and personal stories to be shared in the comment sections. The book debuted on The New York Times nonfiction bestseller list on September 22, 2024, and remained on the list for two weeks. The book is seen in the top 10 on Publishers Weekly Fall 2024 Adult Preview: Lifestyle and on The Washington Post's "5 feel-good books".

  Read more →