AI Assistant Reddit

AI Assistant Reddit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Rabbit r1

The Rabbit r1 is an artificial intelligence personal assistant device developed by the American technology startup Rabbit Inc and co-designed by Teenage Engineering. It was announced at the 2024 Consumer Electronics Show as a handheld device intended to perform digital tasks through voice commands, touch interaction, and web-based AI agents. The r1 was marketed around Rabbit's concept of a "large action model" (LAM), which the company described as software able to operate websites and services on behalf of users. The device runs rabbitOS, an operating system based on the Android Open Source Project. Its services have included AI search, image recognition, voice interaction, music playback, rideshare and food-ordering integrations, and later experimental web-agent features such as LAM Playground and teach mode. Initial reviews were largely negative, with reviewers criticizing the device's limited functionality, bugs, and unclear advantages over a smartphone. Critics also questioned Rabbit's claims after the r1 software was shown to run on an Android phone. Rabbit continued to issue software updates after launch, including rabbitOS 2 in September 2025, which introduced a redesigned card-based interface, gesture navigation, and a "creations" feature for generating small software tools and experiences on the device. Rabbit Inc was founded by Jesse Lyu Cheng. == Hardware == Display: A 2.88-inch touchscreen for interactive user input. Input: push-to-talk button to activate voice commands; scroll wheel; Gyroscope; Magnetometer; Accelerometer; GPS. Camera: 8 MP single camera, with a resolution of 3264x2448, allowing for the connected external AI to use computer vision. Audio: Equipped with a speaker and dual microphones for audio interaction. Connectivity: Supports Wi-Fi and cellular connections via a SIM card slot to access internet services. Processor: Runs on a 2.3GHz MediaTek Helio P35 processor. Memory: Contains 4GB of RAM for operational tasks. Storage: Offers 128GB of internal storage for data. Ports: Utilizes a USB-C port for charging and data connections. == Software == The Rabbit r1 runs rabbitOS, which is based on the Android Open Source Project (AOSP), specifically Android 13. Rabbit founder Jesse Lyu described rabbitOS as a "very bespoke AOSP" after reports that the r1's software could be run on a conventional Android phone. Rabbit described the r1 as using a large action model (LAM), a type of AI agent intended to perform tasks across software interfaces rather than only answer questions. At launch, the device supported a limited set of services, including AI search, vision features, music playback, and some third-party integrations. Perplexity.ai was one of the AI services used to answer user queries. In 2024, Rabbit released several software updates that added features and attempted to address early criticism of the device. In July 2024, the company launched "beta rabbit", an advanced search and conversation mode for more complex queries. In October 2024, it released LAM Playground, a web-based agent feature intended to let the r1 operate websites on behalf of users. Reviewers found the feature experimental; Android Authority reported that it could perform some navigation tasks but struggled with CAPTCHAs, loops, and unintended behavior. In November 2024, Rabbit introduced a beta "teach mode", which allowed users to demonstrate web-based tasks in the Rabbithole web portal and later ask the r1 to repeat them. The company described teach mode as experimental, and The Verge noted that Rabbit warned users that results could be unpredictable and that CAPTCHA-protected sites could cause problems. Rabbit released rabbitOS 2 in September 2025. The update redesigned the interface around a card-based layout, added additional touchscreen gestures, and introduced "creations", a feature that lets users generate simple software tools, games, and interfaces through natural-language prompts. Coverage of the update described it as a major software overhaul rather than new hardware. == Reception == === Funding === Rabbit raised $20 million in funding from Khosla Ventures, Synergis Capital and Kakao Investment in October 2023. The company announced an additional $10 million in funding in December 2023. === Sales === Following its announcement at the 2024 Consumer Electronics Show, 130,000 units were sold. On August 13, 2024, Rabbit announced that sales of r1 had expanded to the entire European Union (except Malta) and United Kingdom. On August 21, 2024, sales of r1 expanded to Singapore. === Reviews === The r1 was met with strong criticism immediately after Rabbit began shipping the device. Some reviews questioned what the device was able to do that a smartphone could not, while comparing it to the similar Humane Ai Pin. YouTuber Marques Brownlee called the device "barely reviewable". Android Authority's Mishaal Rahman managed to install Rabbit r1's software on a Pixel 6a smartphone, after a tipster shared an APK file. The Verge echoed the claims made by Rahman. In response, Lyu published statements confirming its use of Android, but denying that the r1 is an Android app. Mashable called its Vision features impressive, but said that "these praise-worthy features are overshadowed by buggy performance". Ars Technica wrote a blog post claiming "the company is blocking access from bootleg APKs". TechCrunch gave a slightly more positive review, calling the device a "fun peep at a possible future", but could not "advise anyone to buy one now." Shortly after the launch of r1, Rabbit began a weekly cadence of software updates to address much of the criticism from the early reviews, including "battery and GPS performance, time zone selection, and more". Digital Trends said the Magic Camera feature "takes the most mundane, ordinary, and badly composed photos and makes something fun and eye-catching from them." Mashable said the "beta rabbit" feature "makes Rabbit R1 more conversational and intelligent". Later coverage noted that Rabbit continued to update the r1 after its poorly received launch. The Verge reported in September 2024 that about 5,000 of roughly 100,000 purchasers were using the device at any given moment, citing Lyu, and described the product as having launched before it was ready. In 2025, coverage of rabbitOS 2 described the update as an attempt to reset the device's software experience after the criticism of its original release. == Controversies == === GAMA project === Rabbit Inc has garnered attention due to allegations surrounding its funding and the company's past projects. The company came under scrutiny when Stephen Findeisen, known as Coffeezilla on YouTube, published a video in May 2024, alleging that Rabbit Incorporation was "built on a scam". Rabbit Incorporation, initially named Cyber Manufacturing Co, rebranded just two months before launching the Rabbit R1. The company, under its former name, raised $6 million in November 2021 for a project called GAMA, described as a "Next Generation NFT Project." Jesse Lyu, the CEO of Rabbit Incorporation, referred to GAMA as a "fun little project." Coffeezilla, who investigates influencer scams, highlighted old Clubhouse recordings of Jesse Lyu discussing the GAMA project. In these recordings, Lyu emphasized the substantial funding behind GAMA and its potential to be a revolutionary, carbon-negative cryptocurrency. Coffeezilla questioned the whereabouts of the funds raised for GAMA, estimating that approximately $1 million in refunds to investors remained unresolved. He suggested that the rebranding to Rabbit Incorporation and the shift to developing the Rabbit R1 were attempts to divert from the GAMA project's issues. In response to Coffeezilla's inquiries, Rabbit Incorporation stated that the $6 million raised was used for the GAMA project. The company said that NFTs cannot be refunded unless the owner agrees to "burn" them on the blockchain. Rabbit Incorporation also said that the GAMA project was open-sourced and returned to the community, aligning with community feedback. They also mentioned that efforts to buy back NFTs were made to counteract malicious trading and maintain market stability. === Security === In June 2024, Engadget reported that the Rabbitude team, a community reverse engineering project, had gained access to the r1's codebase revealing that r1's software contained several hardcoded API keys in its code for ElevenLabs, Microsoft Azure, Yelp, and Google Maps, potentially allowing unauthorized access to r1 responses, including those containing the users' personal information. For a short time, Rabbit immediately began revoking and rotating those secrets and confirmed that the code was leaked by an employee who had "been terminated and remains under investigation". In July 2024, the company revealed that all user chats and device pairing data were logged on the r1 with no ability to delete them. This meant that lost or stolen devices could be used to extract user
Read more →
Toad (software)

Toad is a database management toolset from Quest Software for managing relational and non-relational databases using SQL aimed at database developers, database administrators, and data analysts. The Toad toolset runs against Oracle, SQL Server, IBM DB2 (LUW & z/OS), SAP and MySQL. A Toad product for data preparation supports many data platforms. == History == A practicing Oracle DBA, Jim McDaniel, designed Toad for his own use in the mid-1990s. He called it Tool for Oracle Application Developers, shortened to "TOAD". McDaniel initially distributed the tool as shareware and later online as freeware. Quest Software acquired TOAD in October 1998. Quest Software itself was acquired by Dell in 2012 to form Dell Software. In June 2016, Dell announced the sale of their software division, including the Quest business, to Francisco Partners and Elliott Management Corporation. On October 31, 2016, the sale was finalized. On November 1, 2016, the sale of Dell Software to Francisco Partners and Elliott Management was completed, and the company re-launched as Quest Software. == Features == Connection Manager - Allow users to connect natively to the vendor’s database whether on-premise or DBaaS. Browser - Allow users to browse all the different database/schema objects and their properties effective management. Editor - A way to create and maintain scripts and database code with debugging and integration with source control. Unit Testing (Oracle) - Ensures code is functionally tested before it is released into production. Static code review (Oracle) - Ensures code meets required quality level using a rules-based system. SQL Optimization - Provides developers with a way to tune and optimize SQL statements and database code without relying on a DBA. Advanced optimization enables DBAs to tune SQL effectively in production. Scalability testing and database workload replay - Ensures that database code and SQL will scale properly before it gets released into production. == Books == Toad Pocket Reference for Oracle plsql 1st Edition by Jim McDaniel and Patrick McGrath, O'Reilly, 2002 (ISBN 0596003374, ISBN 978-0-596-00337-1) Toad Pocket Reference for Oracle 2nd Edition by Jeff Smith, Bert Scalzo, and Patrick McGrath, O'Reilly, 2005 (ISBN 0596009712, ISBN 978-0-596-00971-7) TOAD Handbook by Bert Scalzo and Dan Hotka, Sams, 2003 (ISBN 0672324865, ISBN 978-0-672-32486-4) TOAD Handbook 2nd Edition by Bert Scalzo and Dan Hotka, Addison-Wesley Professional, 2009 (ISBN 0321649109, ISBN 978-0-321-64910-2). TOAD Handbook 2nd Edition by Bert Scalzo and Dan Hotka, Addison-Wesley Professional, 2009 (ISBN 0321649109, ISBN 978-0-321-64910-2).
Read more →
Deep image compositing

Deep image compositing is a way of compositing and rendering digital images that emerged in the mid-2010s. In addition to the usual color and opacity channels a notion of spatial depth is created. This allows multiple samples in the depth of the image to make up the final resulting color. This technique produces high quality results and removes artifacts around edges that could not be dealt with otherwise. == Deep data == Deep data is encoded by advanced 3D renderers into an image that samples information about the path each rendered pixel takes along the z axis extending outward from the virtual camera through space, including the color and opacity of every non-opaque surface or volume it passes through along the way, as well as neighboring samples. It might be considered somewhat analogous to the way ray tracing generates simulated photon paths through such mediums; however, ray tracing and other traditional rendering techniques generally produce images that contain only three or four channels of color and opacity values per pixel, flattened into a two dimensional frame. Depth maps, on the other hand, contain z axis information encoded in a grayscale image. Each level of gray represents a different slice of the z space. The "thickness" of each slice is determined at time of render, allowing for more or less depth fidelity depending on how deep the scene is. Depth maps have been a boon to compositors for blending 3D renders with live action and practical elements. To be useful, the map must have high enough bit depth to encode separation between close-to-camera objects and objects near infinity. Most 3D software packages are now capable of generating 16-bit and 32-bit depth maps, providing up to 2 billion depth levels. Depth maps do not however include transparency information about non-opaque surfaces or volumes and as such, objects beyond and viewed through these semi- or fully-transparent objects will have no depth information of their own and may not get composited or blurred correctly. Even the popular addition of cryptomattes to many post-production and VFX studios' pipelines, while providing separate color-coded ID shapes for individual elements in a rendered scene to further bridge the gap between CGI and compositing, don't allow for the nearly automated and fully non-linear workflows that deep data does. This is because deep images encapsulate enough 3D information that normally time-intensive tasks such as rotoscoping with numerous holdout mattes for complex interactions between moving characters and semi-transparent environmental volumes like smoke or water, are essentially trivial. Instead of going through that process, multiple mattes could easily be generated from a single set of deep images with no need to re-render every matte element and background for each case. In addition to that efficiency and flexibility, deep data images inherently provide much higher visual quality in common areas that have been difficult with traditional renders, such as the motion-blurred edges of characters with semi-transparent elements like hair. One downside to the use of deep images is their substantial file size, since they encode a relatively enormous amount of data per frame compared to even multichannel formats such as OpenEXR. === Function-based (integrated) === The data is stored as a function of depth. This results in a function curve that can be used to look up the data at any arbitrary depth. Manipulating the data is harder. === Sample-based (deintegrated) === Each sample is considered as an independent piece and can so be manipulated easily. To make sure the data is representing the right detail, an additional expand value needs to be introduced. == Generating deep data == 3D renderers produce the necessary data as a part of the rendering pipeline. Samples are gathered in depth and then combined. The deep data can be written out before this happens and so is nothing new to the process. Generating deep data from camera data needs a proper depth map. This is used in a couple of cases but still not accurate enough for detailed representation. For basic holdout task this can be sufficient though. == Compositing deep data images == Deep images can be composited like regular images. The depth component makes it easier to determine the layering order. Traditionally this had to be input by the user. Deep images have that information for themselves and need no user input. Edge artifacts are reduced as transparent pixels have more data to work with. == History == Deep Images have been around in 3D rendering packages for quite a while now. The use of them for holdouts was first done at several VFX houses in shaders. Holdout mattes can be generated at render time. Using them in a more interactive manner was started recently by several companies, SideFX integrated it in their Houdini software and facilities like Industrial Light & Magic, DreamWorks Animation, Weta, AnimalLogic and DRD studios have implemented interactive solutions. In 2014 the Academy of Motion Picture Arts and Sciences honored the technology with its annual SciTech awards. Dr. Peter Hillman for the long-term development and continued advancement of innovative, robust and complete toolsets for deep compositing and to Colin Doncaster, Johannes Saam, Areito Echevarria, Janne Kontkanen and Chris Cooper for the development, prototyping and promotion of technologies and workflows for deep compositing. == Resources == Pixar Paper Deep Image Paper Video tutorial of Deep Imaging as used on 2012 film Rise of the Planet of the Apes, Nuke compositing software Deep Compositing Course Deep Image File Format at Google Code Academy Award for the Technology Theory of Deep Pixels OpenEXR Deep Pixels
Read more →
View model

A view model or viewpoints framework in systems engineering, software engineering, and enterprise engineering is a framework which defines a coherent set of views to be used in the construction of a system architecture, software architecture, or enterprise architecture. A view is a representation of the whole system from the perspective of a related set of concerns. Since the early 1990s there have been a number of efforts to prescribe approaches for describing and analyzing system architectures. A result of these efforts have been to define a set of views (or viewpoints). They are sometimes referred to as architecture frameworks or enterprise architecture frameworks, but are usually called "view models". Usually a view is a work product that presents specific architecture data for a given system. However, the same term is sometimes used to refer to a view definition, including the particular viewpoint and the corresponding guidance that defines each concrete view. The term view model is related to view definitions. == Overview == The purpose of views and viewpoints is to enable humans to comprehend very complex systems, to organize the elements of the problem and the solution around domains of expertise and to separate concerns. In the engineering of physically intensive systems, viewpoints often correspond to capabilities and responsibilities within the engineering organization. Most complex system specifications are so extensive that no single individual can fully comprehend all aspects of the specifications. Furthermore, we all have different interests in a given system and different reasons for examining the system's specifications. A business executive will ask different questions of a system make-up than would a system implementer. The concept of viewpoints framework, therefore, is to provide separate viewpoints into the specification of a given complex system in order to facilitate communication with the stakeholders. Each viewpoint satisfies an audience with interest in a particular set of aspects of the system. Each viewpoint may use a specific viewpoint language that optimizes the vocabulary and presentation for the audience of that viewpoint. Viewpoint modeling has become an effective approach for dealing with the inherent complexity of large distributed systems. Architecture description practices, as described in IEEE Std 1471-2000, utilize multiple views to address several areas of concerns, each one focusing on a specific aspect of the system. Examples of architecture frameworks using multiple views include Kruchten's "4+1" view model, the Zachman Framework, TOGAF, DoDAF, and RM-ODP. == History == In the 1970s, methods began to appear in software engineering for modeling with multiple views. Douglas T. Ross and K.E. Schoman in 1977 introduce the constructs context, viewpoint, and vantage point to organize the modeling process in systems requirements definition. According to Ross and Schoman, a viewpoint "makes clear what aspects are considered relevant to achieving ... the overall purpose [of the model]" and determines How do we look at [a subject being modelled]? As examples of viewpoints, the paper offers: Technical, Operational and Economic viewpoints. In 1992, Anthony Finkelstein and others published a very important paper on viewpoints. In that work: "A viewpoint can be thought of as a combination of the idea of an “actor”, “knowledge source”, “role” or “agent” in the development process and the idea of a “view” or “perspective” which an actor maintains." An important idea in this paper was to distinguish "a representation style, the scheme and notation by which the viewpoint expresses what it can see" and "a specification, the statements expressed in the viewpoint's style describing particular domains". Subsequent work, such as IEEE 1471, preserved this distinction by utilizing two separate terms: viewpoint and view, respectively. Since the early 1990s there have been a number of efforts to codify approaches for describing and analyzing system architectures. These are often termed architecture frameworks or sometimes viewpoint sets. Many of these have been funded by the United States Department of Defense, but some have sprung from international or national efforts in ISO or the IEEE. Among these, the IEEE Recommended Practice for Architectural Description of Software-Intensive Systems (IEEE Std 1471-2000) established useful definitions of view, viewpoint, stakeholder and concern and guidelines for documenting a system architecture through the use of multiple views by applying viewpoints to address stakeholder concerns. The advantage of multiple views is that hidden requirements and stakeholder disagreements can be discovered more readily. However, studies show that in practice, the added complexity of reconciling multiple views can undermine this advantage. IEEE 1471 (now ISO/IEC/IEEE 42010:2011, Systems and software engineering — Architecture description) prescribes the contents of architecture descriptions and describes their creation and use under a number of scenarios, including precedented and unprecedented design, evolutionary design, and capture of design of existing systems. In all of these scenarios the overall process is the same: identify stakeholders, elicit concerns, identify a set of viewpoints to be used, and then apply these viewpoint specifications to develop the set of views relevant to the system of interest. Rather than define a particular set of viewpoints, the standard provides uniform mechanisms and requirements for architects and organizations to define their own viewpoints. In 1996 the ISO Reference Model for Open Distributed Processing (RM-ODP) was published to provide a useful framework for describing the architecture and design of large-scale distributed systems. == View model topics == === View === A view of a system is a representation of the system from the perspective of a viewpoint. This viewpoint on a system involves a perspective focusing on specific concerns regarding the system, which suppresses details to provide a simplified model having only those elements related to the concerns of the viewpoint. For example, a security viewpoint focuses on security concerns and a security viewpoint model contains those elements that are related to security from a more general model of a system. A view allows a user to examine a portion of a particular interest area. For example, an Information View may present all functions, organizations, technology, etc. that use a particular piece of information, while the Organizational View may present all functions, technology, and information of concern to a particular organization. In the Zachman Framework views comprise a group of work products whose development requires a particular analytical and technical expertise because they focus on either the “what,” “how,” “who,” “where,” “when,” or “why” of the enterprise. For example, Functional View work products answer the question “how is the mission carried out?” They are most easily developed by experts in functional decomposition using process and activity modeling. They show the enterprise from the point of view of functions. They also may show organizational and information components, but only as they relate to functions. === Viewpoints === In systems engineering, a viewpoint is a partitioning or restriction of concerns in a system. Adoption of a viewpoint is usable so that issues in those aspects can be addressed separately. A good selection of viewpoints also partitions the design of the system into specific areas of expertise. Viewpoints provide the conventions, rules, and languages for constructing, presenting and analysing views. In ISO/IEC 42010:2007 (IEEE-Std-1471-2000) a viewpoint is a specification for an individual view. A view is a representation of a whole system from the perspective of a viewpoint. A view may consist of one or more architectural models. Each such architectural model is developed using the methods established by its associated architectural system, as well as for the system as a whole. === Modeling perspectives === Modeling perspectives is a set of different ways to represent pre-selected aspects of a system. Each perspective has a different focus, conceptualization, dedication and visualization of what the model is representing. In information systems, the traditional way to divide modeling perspectives is to distinguish the structural, functional and behavioral/processual perspectives. This together with rule, object, communication and actor and role perspectives is one way of classifying modeling approaches === Viewpoint model === In any given viewpoint, it is possible to make a model of the system that contains only the objects that are visible from that viewpoint, but also captures all of the objects, relationships and constraints that are present in the system and relevant to that viewpoint. Such a model is said to be a viewpoint model, or a view of the
Read more →
Edge inference

Edge inference is the process of running machine learning or deep learning models on local devices (edge devices) such as smartphones, IoT devices, embedded systems, and edge servers instead of centralized cloud computing infrastructure. A key feature of edge computing is edge inference, which allows for real-time data processing, low latency, and improved privacy by reducing the amount of data sent to remote servers.
Read more →
Electronic business

Electronic business (also known as online business or e-business) is any kind of business or commercial activity that includes sharing information across the internet. Commerce constitutes the exchange of products and services between businesses, groups, and individuals; and can be seen as one of the essential activities of any business. E-commerce focuses on the use of ICT to enable the external activities and relationships of the business with individuals, groups, and other organizations, while e-business does not only deal with online commercial operations of enterprises, but also deals with their other organizational matters such as human resource management and production. The term "e-business" was coined by IBM's marketing and Internet team in 1996. == Market participants == Electronic business can take place between a very large number of market participants; it can be between business and consumer, private individuals, public administrations, or any other organizations such as non-governmental organizations (NGOs). These various market participants can be divided into three main groups: Business (B) Consumer (C) Administration (A) All of them can be either buyers or service providers within the market. There are nine possible combinations for electronic business relationships. B2C and B2B belong to E-commerce, while A2B and A2A belong to the E-government sector which is also a part of the electronic business. == History == One of the founding pillars of electronic business was the development of the Electronic Data Interchange (EDI) electronic data interchange. This system replaced traditional mailing and faxing of documents with a digital transfer of data from one computer to another, without any human intervention. Michael Aldrich is considered the developer of the predecessor to online shopping. In 1979, the entrepreneur connected a television set to a transaction processing computer with a telephone line and called it "teleshopping", meaning shopping at distance. From the mid-nineties, major advancements were made in the commercial use of the Internet. Amazon, which launched in 1995, started as an online bookstore and grew to become nowadays the largest online retailer worldwide, selling food, toys, electronics, apparel and more. Other successful stories of online marketplaces include eBay or Etsy. In 1994, IBM, with its agency Ogilvy & Mather, began to use its foundation in IT solutions and expertise to market itself as a leader of conducting business on the Internet through the term "e-business." Then CEO Louis V. Gerstner, Jr. was prepared to invest $1 billion to market this new brand. After conducting worldwide market research in October 1997, IBM began with an eight-page piece in The Wall Street Journal that would introduce the concept of "e-business" and advertise IBM's expertise in the new field. IBM decided not to trademark the term "e-business" in the hopes that other companies would use the term and create an entirely new industry. However, this proved to be too successful and by 2000, to differentiate itself, IBM launched a $300 million campaign about its "e-business infrastructure" capabilities. Since that time, the terms, "e-business" and "e-commerce" have been loosely interchangeable and have become a part of the common vernacular. According to the U.S. Department Of Commerce, the estimated retail e-commerce sales in Q1 2020 were representing almost 12% of total U.S. retail sales, against 4% for Q1 2010. == Business model == The transformation toward e-business is complex and in order for it to succeed, there is a need to balance between strategy, an adapted business model (e-intermediary, marketplaces), right processes (sales, marketing) and technology (Supply Chain Management, Customer Relationship Management). When organizations go online, they have to decide which e-business models best suit their goals. A business model is defined as the organization of product, service and information flows, and the source of revenues and benefits for suppliers and customers. The concept of the e-business model is the same but used in online presence. === Revenue model === A key component of the business model is the revenue model or profit model, which is a framework for generating revenues. It identifies which revenue source to pursue, what value to offer, how to price the value, and who pays for the value. It is a key component of a company's business model. It primarily identifies what product or service will be created in order to generate revenues and the ways in which the product or service will be sold. Without a well-defined revenue model, that is, a clear plan of how to generate revenues, new businesses will more likely struggle due to costs that they will not be able to sustain. By having a revenue model, a business can focus on a target audience, fund development plans for a product or service, establish marketing plans, begin a line of credit and raise capital. ==== E-commerce ==== E-commerce (short for "electronic commerce") is trading in products or services using computer networks, such as the Internet. Electronic commerce draws on technologies such as mobile commerce, electronic funds transfer, supply chain management, Internet marketing, online transaction processing, electronic data interchange (EDI), inventory management systems, and automated data collection. Modern electronic commerce typically uses the World Wide Web for at least one part of the transaction's life cycle, although it may also use other technologies such as e-mail. == Concerns == While much has been written of the economic advantages of Internet-enabled commerce, there is also evidence that some aspects of the internet such as maps and location-aware services may serve to reinforce economic inequality and the digital divide. Electronic commerce may be responsible for consolidation and the decline of mom-and-pop, brick and mortar businesses resulting in increases in income inequality. === Security === E-business systems naturally have greater security risks than traditional business systems, therefore it is important for e-business systems to be fully protected against these risks. A far greater number of people have access to e-businesses through the internet than would have access to a traditional business. Customers, suppliers, employees, and numerous other people use any particular e-business system daily and expect their confidential information to stay secure. Hackers are one of the great threats to the security of e-businesses. Some common security concerns for e-Businesses include keeping business and customer information private and confidential, the authenticity of data, and data integrity. Some of the methods of protecting e-business security and keeping information secure include physical security measures as well as data storage, data transmission, anti-virus software, firewalls, and encryption to list a few. ==== Privacy and confidentiality ==== Confidentiality is the extent to which businesses makes personal information available to other businesses and individuals. With any business, confidential information must remain secure and only be accessible to the intended recipient. However, this becomes even more difficult when dealing with e-businesses specifically. To keep such information secure means protecting any electronic records and files from unauthorized access, as well as ensuring safe transmission and data storage of such information. Tools such as encryption and firewalls manage this specific concern within e-business. ==== Authenticity ==== E-business transactions pose greater challenges for establishing authenticity due to the ease with which electronic information may be altered and copied. Both parties in an e-business transaction want to have the assurance that the other party is who they claim to be, especially when a customer places an order and then submits a payment electronically. One common way to ensure this is to limit access to a network or trusted parties by using a virtual private network (VPN) technology. The establishment of authenticity is even greater when a combination of techniques are used, and such techniques involve checking "something you know" (i.e. password or PIN), "something you need" (i.e. credit card), or "something you are" (i.e. digital signatures or voice recognition methods). Many times in e-business, however, "something you are" is pretty strongly verified by checking the purchaser's "something you have" (i.e. credit card) and "something you know" (i.e. card number). ==== Data integrity ==== Data integrity answers the question "Can the information be changed or corrupted in any way?" This leads to the assurance that the message received is identical to the message sent. A business needs to be confident that data is not changed in transit, whether deliberately or by accident. To help with data integrity, firewalls protect stored data against unauthorized access, while
Read more →
Digital image correlation and tracking

Digital image correlation and tracking is an optical method that employs tracking and image registration techniques for accurate 2D and 3D measurements of changes in 2D images or 3D volumes. This method is often used to measure full-field displacement and strains, and it is widely applied in many areas of science and engineering. Compared to strain gauges and extensometers, digital image correlation methods provide finer details about deformation, due to the ability to provide both local and average data. == Overview == Digital image correlation (DIC) techniques have been increasing in popularity, especially in micro- and nano-scale mechanical testing applications due to their relative ease of implementation and use. Advances in computer technology and digital cameras have been the enabling technologies for this method and while white-light optics has been the predominant approach, DIC can be and has been extended to almost any imaging technology. The concept of using cross-correlation to measure shifts in datasets has been known for a long time, and it has been applied to digital images since at least the early 1970s. The present-day applications are almost innumerable, including image analysis, image compression, velocimetry, and strain estimation. Much early work in DIC in the field of mechanics was led by researchers at the University of South Carolina in the early 1980s and has been optimized and improved in recent years. Commonly, DIC relies on finding the maximum of the correlation array between pixel intensity array subsets on two or more corresponding images, which gives the integer translational shift between them. It is also possible to estimate shifts to a finer resolution than the resolution of the original images, which is often called "sub-pixel" registration because the measured shift is smaller than an integer pixel unit. For sub-pixel interpolation of the shift, other methods do not simply maximize the correlation coefficient. An iterative approach can also be used to maximize the interpolated correlation coefficient by using non-linear optimization techniques. The non-linear optimization approach tends to be conceptually simpler and can handle large deformations more accurately, but as with most nonlinear optimization techniques, it is slower. The two-dimensional discrete cross correlation r i j {\displaystyle r_{ij}} can be defined in several ways, one possibility being: r i j = ∑ m ∑ n [ f ( m + i , n + j ) − f ¯ ] [ g ( m , n ) − g ¯ ] ∑ m ∑ n [ f ( m , n ) − f ¯ ] 2 ∑ m ∑ n [ g ( m , n ) − g ¯ ] 2 . {\displaystyle r_{ij}={\frac {\sum _{m}\sum _{n}[f(m+i,n+j)-{\bar {f}}][g(m,n)-{\bar {g}}]}{\sqrt {\sum _{m}\sum _{n}{[f(m,n)-{\bar {f}}]^{2}}\sum _{m}\sum _{n}{[g(m,n)-{\bar {g}}]^{2}}}}}.} Here f(m, n) is the pixel intensity or the gray-scale value at a point (m, n) in the original image, g(m, n) is the gray-scale value at a point (m, n) in the translated image, f ¯ {\displaystyle {\bar {f}}} and g ¯ {\displaystyle {\bar {g}}} are mean values of the intensity matrices f and g respectively. However, in practical applications, the correlation array is usually computed using Fourier-transform methods, since the fast Fourier transform is a much faster method than directly computing the correlation. F = F { f } , G = F { g } . {\displaystyle \mathbf {F} ={\mathcal {F}}\{f\},\quad \mathbf {G} ={\mathcal {F}}\{g\}.} Then taking the complex conjugate of the second result and multiplying the Fourier transforms together elementwise, we obtain the Fourier transform of the correlogram, R {\displaystyle \ R} : R = F ∘ G ∗ , {\displaystyle R=\mathbf {F} \circ \mathbf {G} ^{},} where ∘ {\displaystyle \circ } is the Hadamard product (entry-wise product). It is also fairly common to normalize the magnitudes to unity at this point, which results in a variation called phase correlation. Then the cross-correlation is obtained by applying the inverse Fourier transform: r = F − 1 { R } . {\displaystyle \ r={\mathcal {F}}^{-1}\{R\}.} At this point, the coordinates of the maximum of r i j {\displaystyle r_{ij}} give the integer shift: ( Δ x , Δ y ) = arg ⁡ max ( i , j ) { r } . {\displaystyle (\Delta x,\Delta y)=\arg \max _{(i,j)}\{r\}.} == Deformation mapping == For deformation mapping, the mapping function that relates the images can be derived from comparing a set of subwindow pairs over the whole images. (Figure 1). The coordinates or grid points (xi, yj) and (xi, yj) are related by the translations that occur between the two images. If the deformation is small and perpendicular to the optical axis of the camera, then the relation between (xi, yj) and (xi, yj) can be approximated by a 2D affine transformation such as: x ∗ = x + u + ∂ u ∂ x Δ x + ∂ u ∂ y Δ y , {\displaystyle x^{}=x+u+{\frac {\partial u}{\partial x}}\Delta x+{\frac {\partial u}{\partial y}}\Delta y,} y ∗ = y + v + ∂ v ∂ x Δ x + ∂ v ∂ y Δ y . {\displaystyle y^{}=y+v+{\frac {\partial v}{\partial x}}\Delta x+{\frac {\partial v}{\partial y}}\Delta y.} Here u and v are translations of the center of the sub-image in the X and Y directions respectively. The distances from the center of the sub-image to the point (x, y) are denoted by Δ x {\displaystyle \Delta x} and Δ y {\displaystyle \Delta y} . Thus, the correlation coefficient rij is a function of displacement components (u, v) and displacement gradients ∂ u ∂ x , ∂ u ∂ y , ∂ v ∂ x , ∂ v ∂ y . {\displaystyle {\frac {\partial u}{\partial x}},{\frac {\partial u}{\partial y}},{\frac {\partial v}{\partial x}},{\frac {\partial v}{\partial y}}.} DIC has proven to be very effective at mapping deformation in macroscopic mechanical testing, where the application of specular markers (e.g. paint, toner powder) or surface finishes from machining and polishing provide the needed contrast to correlate images well. However, these methods for applying surface contrast do not extend to the application of free-standing thin films for several reasons. First, vapor deposition at normal temperatures on semiconductor grade substrates results in mirror-finish quality films with RMS roughnesses that are typically on the order of several nanometers. No subsequent polishing or finishing steps are required, and unless electron imaging techniques are employed that can resolve microstructural features, the films do not possess enough useful surface contrast to adequately correlate images. Typically this challenge can be circumvented by applying paint that results in a random speckle pattern on the surface, although the large and turbulent forces resulting from either spraying or applying paint to the surface of a free-standing thin film are too high and would break the specimens. In addition, the sizes of individual paint particles are on the order of μms, while the film thickness is only several hundred nanometers, which would be analogous to supporting a large boulder on a thin sheet of paper. == Digital volume correlation == Digital Volume Correlation (DVC, and sometimes called Volumetric-DIC) extends the 2D-DIC algorithms into three dimensions to calculate the full-field 3D deformation from a pair of 3D images. This technique is distinct from 3D-DIC, which only calculates the 3D deformation of an exterior surface using conventional optical images. The DVC algorithm is able to track full-field displacement information in the form of voxels instead of pixels. The theory is similar to above except that another dimension is added: the z-dimension. The displacement is calculated from the correlation of 3D subsets of the reference and deformed volumetric images, which is analogous to the correlation of 2D subsets described above. DVC can be performed using volumetric image datasets. These images can be obtained using confocal microscopy, X-ray computed tomography, Magnetic Resonance Imaging or other techniques. Similar to the other DIC techniques, the images must exhibit a distinct, high-contrast 3D "speckle pattern" to ensure accurate displacement measurement. DVC was first developed in 1999 to study the deformation of trabecular bone using X-ray computed tomography images. Since then, applications of DVC have grown to include granular materials, metals, foams, composites and biological materials. To date it has been used with images acquired by MRI imaging, Computer Tomography (CT), micro-CT, confocal microscopy, and lightsheet microscopy. DVC is currently considered to be ideal in the research world for 3D quantification of local displacements, strains, and stress in biological specimens. It is preferred because of the non-invasiveness of the method over traditional experimental methods. Two of the key challenges are improving the speed and reliability of the DVC measurement. The 3D imaging techniques produce noisier images than conventional 2D optical images, which reduces the quality of the displacement measurement. Computational speed is restricted by the file sizes of 3D images, which are significantly larger than 2D images. For example, an
Read more →
Rake (software)

Rake is a software task management and a build automation tool created by Jim Weirich. It allows the user to specify tasks and to describe dependencies as well as to group tasks into namespaces. It is similar to SCons and Make. Rake was written in Ruby and has been part of the standard library of Ruby since version 1.9. == Examples == The tasks that should be executed need to be defined in a configuration file called Rakefile. A Rakefile has no special syntax and contains executable Ruby code. === Tasks === The basic unit in Rake is the task. A task has a name and an action block, that defines its functionality. The following code defines a task called greet that will output the text "Hello, Rake!" to the console. When defining a task, you can optionally add dependencies, that is one task can depend on the successful completion of another task. Calling the "seed" task from the following example will first execute the "migrate" task and only then proceed with the execution of the "seed" task.Tasks can also be made more versatile by accepting arguments. For example, the "generate_report" task will take a date as argument. If no argument is supplied the current date is used.A special type of task is the file task, which can be used to specify file creation tasks. The following task, for example, is given two object files, i.e. "a.o" and "b.o", to create an executable program.Another useful tool is the directory convenience method, that can be used to create directories upon demand. === Rules === When a file is named as a prerequisite but it does not have a file task defined for it, Rake will attempt to synthesize a task by looking at a list of rules supplied in the Rakefile. For example, suppose we were trying to invoke task "mycode.o" with no tasks defined for it. If the Rakefile has a rule that looks like this: This rule will synthesize any task that ends in ".o". It has as a prerequisite that a source file with an extension of ".c" must exist. If Rake is able to find a file named "mycode.c", it will automatically create a task that builds "mycode.o" from "mycode.c". If the file "mycode.c" does not exist, Rake will attempt to recursively synthesize a rule for it. When a task is synthesized from a rule, the source attribute of the task is set to the matching source file. This allows users to write rules with actions that reference the source file. === Advanced rules === Any regular expression may be used as the rule pattern. Additionally, a proc may be used to calculate the name of the source file. This allows for complex patterns and sources. The following rule is equivalent to the example above: NOTE: Because of a quirk in Ruby syntax, parentheses are required around a rule when the first argument is a regular expression. The following rule might be used for Java files: === Namespaces === To better organize big Rakefiles, tasks can be grouped into namespaces. Below is an example of a simple Rake recipe:
Read more →
Wargame (hacking)

In hacking, a wargame (or war game) is a cyber-security challenge and mind sport in which the competitors must exploit or defend a vulnerability in a system or application, and/or gain or prevent access to a computer system. A wargame usually involves a capture the flag logic, based on pentesting, semantic URL attacks, knowledge-based authentication, password cracking, reverse engineering of software (often JavaScript, C and assembly language), code injection, SQL injections, cross-site scripting, exploits, IP address spoofing, forensics, and other hacking techniques. == Wargames for preparedness == Wargames are also used as a method of cyberwarfare preparedness. The NATO Cooperative Cyber Defence Centre of Excellence (CCDCOE) organizes an annual event, Locked Shields, which is an international live-fire cyber exercise. The exercise challenges cyber security experts through real-time attacks in fictional scenarios and is used to develop skills in national IT defense strategies. == Additional applications == Wargames can be used to teach the basics of web attacks and web security, giving participants a better understanding of how attackers exploit security vulnerabilities. Wargames are also used as a way to "stress test" an organization's response plan and serve as a drill to identify gaps in cyber disaster preparedness.
Read more →
List & Label

List & Label is a professional reporting tool for software developers. It provides comprehensive design, print and export functions. The software component runs on Microsoft Windows and can be implemented in desktop, cloud and web applications. List & Label can be used to create user-defined dashboards, lists, invoices, forms and labels. It supports many development environments, frameworks and programming languages such as Microsoft Visual Studio, Embarcadero RAD Studio, .NET Framework, .NET Core, ASP.NET, C++, Delphi, Java, C Sharp and some more. List & Label either retrieves data from various sources via data binding, or works database independent. Reports are designed and created in the so-called List & Label Designer and then exported into a multitude of formats like PDF, Excel, XHTML and RTF. Since version 27 a web report designer for ASP.NET MVC is available. == History == The product was first released in 1992 by combit. The current version is 30. A new major version of List & Label is released every fall, usually in October. Updates are available several times a year via Service Pack. == Features == === Report Designer === The Designer enables users to graphically layout the report. It offers report objects such as tables, charts, crosstabs, gauges, HTML, conditionally formatted text, barcodes, matrix codes, and graphics, and is extensible using third-party add-ons. User applications can interact with the report via the programmable object model of the report. The real-time preview functionality allows users to view changes instantly. Usability features include layer and appearance management, enabling conditional logic to dynamically control the visibility of objects in reports. The Designer also supports the inclusion of multiple report containers in a single project, accommodating complex layouts such as parallel tables and charts. A formula wizard and support for scripting languages such as C# facilitate advanced calculations and logic. The Designer's object model (DOM) provides developers with the ability to modify layouts and behaviors programmatically. === Web Report Designer === The web report designer works browser-based and independent from printer drivers and spoolers - that makes deployments to the cloud easier. Just like the use of the Visual Studio deployment pipeline. === Data Sources === Depending on the programming language, the product offers automatic support for data sources: Databases such as Microsoft SQL Server, Oracle, MySQL, PostgreSQL, IBM Db2, SQLite, MariaDB, MongoDB, Cosmos DB XML data, CSV Business objects Data sources that can be accessed via OLE DB, ODBC or ADO.NET LINQ data and data from web services GraphQL Additionally, the product offers support for unbound data and can be extended to support other data sources via interfaces. === Output Options === Printer Image Formats (JPEG, BMP, EMF, TIFF, PNG, SVG, HEIF, WebP) Document Formats: PDF, PDF/A, Word (DOCX), Excel (XLS), PowerPoint (PPTX) HTML, XHTML, MHTML Barcodes Plain Text, RTF, CSV, JSON XML, ZIP, Email, JSON List & Label preview file === Target Audience === List & Label can be used in Windows development environments. While it competes most notably on the Microsoft .NET platform with other products such as Crystal Reports, SQL Server Reporting Services, ActiveReports, there are few competing products for other programming languages (e.g. Progress, Alaska Xbase++, Visual DataFlex). == Awards == Reader's Choice Award 2005–2008 Stevie Awards 2021: Best Technology for Data Visualization Top 100 Publisher Award Component Source 2013-2014, 2014-2015,2016, 2018, 2019, 2020, 2021, 2022
Read more →
IWork

iWork is an office suite of applications created by Apple for its macOS, iPadOS, and iOS operating systems, and also available cross-platform through the iCloud website. iWork includes the presentation application Keynote, the word-processing and desktop-publishing application Pages, and the spreadsheet application Numbers. Apple's design goals in creating iWork have been to allow Mac users to easily create attractive documents and spreadsheets, making use of macOS's extensive font library, integrated spelling checker, sophisticated graphics APIs and its AppleScript automation framework. The equivalent Microsoft Office applications to Pages, Numbers, and Keynote are Word, Excel, and PowerPoint, respectively. Although Microsoft Office applications cannot open iWork documents, iWork applications can open Office documents for editing, and export documents from iWork's native formats (.pages, .numbers, .key) to Microsoft Office formats (.docx, .xlsx, .pptx, etc.) as well as to PDF files. The oldest application in iWork is Keynote, first released as a standalone application in 2003 for use by Steve Jobs in his presentations. Steve Jobs announced Keynote saying "It's for when your presentation really matters". Pages was released with the first iWork bundle in 2004; Numbers was added in 2007 with the release of iWork '08. The next release, iWork '09, also included beta access to iWork.com, an online service that allowed users to upload and share documents on the web, now integrated into Apple's iCloud service. A version of iWork for iOS was released in 2010 with the first iPad, and the apps have been regularly updated since, including the addition of iPhone support. In 2013, Apple launched iWork web apps in iCloud; even years later, however, their functionality is somewhat limited compared to equivalents on the desktop. iWork was initially sold as a suite for $79, then later at $19.99 per app on OS X and $9.99 per app on iOS. Apple announced in October 2013 that all iOS and OS X devices purchased onwards, whether new or refurbished, would be eligible for a free download of all three iWork apps: after device setup, the user can "claim" the apps on the App Store, after which they are permanently linked to the user’s Apple ID. iWork for iCloud, which also incorporates a document hosting service, is free to all iCloud users. iWork was released for free on macOS and iOS (including older or resold devices) in April 2017. In September 2016, Apple announced that the real-time collaboration feature would be available for all iWork apps. == History == The first version of iWork, iWork '05, was announced on January 11, 2005 at the Macworld Conference & Expo and made available on January 22 in the United States and on January 29 worldwide. iWork '05 comprised two applications: Keynote 2, a presentation creation program, and Pages, a word processor. iWork '05 was sold for US$79. A 30-day trial was also made available for download on Apple's website. Originally IGG Software held the rights to the name iWork. While iWork was billed by Apple as "a successor to AppleWorks", it does not replicate AppleWorks's database and drawing tools. However, iWork integrates with existing applications from Apple's iLife suite through the Media Browser, which allows users to drag and drop music from iTunes, movies from iMovie, and photos from iPhoto and Aperture directly into iWork documents. iWork '06 was released on January 10, 2006 and contained updated versions of both Keynote and Pages. Both programs were released as universal binaries for the first time, allowing them to run natively on both PowerPC processors and the Intel processors used in the new iMac desktop computers and MacBook Pro notebooks which had been announced on the same day as the new iWork suite. The next version of the suite, iWork '08, was announced and released on August 7, 2007 at a special media event at Apple's campus in Cupertino, California. iWork '08, like previous updates, contained updated versions of Keynote and Pages. A new spreadsheet application, Numbers, was also introduced. Numbers differed from other spreadsheet applications, including Microsoft Excel, in that it allowed users to create documents containing multiple spreadsheets on a flexible canvas using a number of built-in templates. iWork '09, was announced on January 6, 2009 and released the same day. It contains updated versions of all three applications in the suite. iWork '09 also included access to a beta version of the iWork.com service, which allowed users to share documents online until that service was decommissioned at the end of July 2012. Users of iWork '09 could upload a document directly from Pages, Keynote, or Numbers and invite others to view it online. Viewers could write notes and comments in the document, and download a copy in iWork, Microsoft Office, or PDF formats. iWork '09 was also released with the Mac App Store on January 6, 2011 at $19.99 per application, and received regular updates after this point, including links to iCloud and a high-DPI version designed to match Apple's MacBook Pro with Retina Display. On January 27, 2010, Apple announced iWork for iPad, to be available as three separate $9.99 applications from the App Store. This version has also received regular updates including a version for pocket iPhone and iPod Touch devices, and an update to take advantage of Retina Display devices and the larger screens of recent iPhones. On October 22, 2013, Apple announced an overhaul of the iWork software for both the Mac and iOS. Both suites were made available via the respective App Stores. The update is free for current iWork owners and was also made available free of charge for anyone purchasing an OS X or iOS device after October 1, 2013. Any user activating the newly free iWork apps on a qualifying device can download the same apps on another iOS or OS X device logged into the same App Store account. The new OS X versions have been criticized for losing features such as multiple selection, linked text boxes, bookmarks, 2-up page views, mail merge, searchable comments, ability to read/export RTF files, default zoom and page count, integration with AppleScript. Apple has provided a road-map for feature re-introduction, stating that it hopes to reintroduce some missing features within the next six months. As of April 1, 2014 a few features—e.g., the ability to set the default zoom—had been reintroduced, though scores had not. Due to using a completely new file format that can work across macOS, Windows, and in most web browsers by using the online iCloud web apps, versions of iWork beginning with iWork 13 and later do not open or allow editing of documents created in versions prior to iWork '09, with users who attempt to open older iWork files being given a pop-up in the new iWork 13 app versions telling them to use the previous iWork '09 (which users may or may not have on their machine) in order to open and edit such files. Accordingly, the current version for OS X (which was initially only compatible with OS X Mavericks 10.9 onwards) moves any previously installed iWork '09 apps to an iWork '09 folder on the users machine (in /Applications/iWork '09/), as a work-around to allow users continued use of the earlier suite in order to open and edit older iWork documents locally on their machine. In October 2015, Apple released an update to mitigate this issue, allowing users to open documents saved in iWork '06 and iWork '08 formats in the latest version of Pages. In 2016, Apple announced that the real-time collaboration feature would be available for all iWork apps, instead of being constrained to using iWork for iCloud. The feature is comparable to Google Docs. == Versions == === Major releases === === Updates === iWork '09 received several updates: iWork 9.0.3 DVD (for Mac OS X 10.5.6 "Leopard" or newer; released August 26, 2010) iWork 9.0.4 (for Mac OS X 10.5.6 "Leopard" or newer; released August 26, 2010) iWork 9.1 (for Mac OS X 10.6.6 "Snow Leopard" or newer; released July 20, 2011) iWork 9.3 (for Mac OS X 10.7.4 "Lion" or newer; released December 4, 2012) The Mac App Store version of iWork was updated on October 15, 2015 for 10.10 "Yosemite" or newer. It is the final release to support 10.10 "Yosemite" and 10.11 "El Capitan". Keynote 6.6, Pages 5.6 and Numbers 3.6 are included. iWork received a major update again on March 28, 2019 with Keynote 9.0, Pages 8.0 and Numbers 6.0. == Components == === Common components === Products in the iWork suite share a number of components, largely as a result of sharing underlying code from the Cocoa and similar shared application programming interfaces (APIs). Among these are the well known universal multilingual spell checker, which can also be found in products like Safari and Mail. Grammar checking, find and replace, style and color pickers are similar examples of design features found throughout the Apple application space. Moreover, the applications
Read more →
Content Disarm and Reconstruction

Content Disarm and Reconstruction (CDR) is a computer security technology for removing potentially malicious code from files. Unlike malware analysis, CDR technology does not determine or detect malware's functionality but removes all file components that are not approved within the system's definitions and policies. It is used to prevent cyber security threats from entering a corporate network perimeter. Channels that CDR can be used to protect include email and website traffic. Advanced solutions can also provide similar protection on computer endpoints, or cloud email and file sharing services. There are three levels of CDR; 1) flattening and converting the original file to a PDF, 2) stripping active content while keeping the original file type, and 3) eliminating all file-borne risk while maintaining file type, integrity and active content. Beyond these three levels, there are also more advanced forms of CDR that is able to perform "soft conversion" and "hard conversion", based on the user's preference in balancing usability and security. == Applications == CDR works by processing all incoming files of an enterprise network, deconstructing them, and removing the elements that do not match the file type's standards or set policies. CDR technology then rebuilds the files into clean versions that can be sent on to end users as intended. Because CDR removes all potentially malicious code, it can be effective against zero-day vulnerabilities that rely on being an unknown threat that other security technologies would need to patch against to maintain protection. CDR can be used to prevent cyber threats from variety of sources: Email Data Diodes Web Browsers Endpoints File Servers FTP Cloud email or webmail programs SMB/CIFS Removable media scanning (CDR Kiosk) CDR can be applied to a variety of file formats including: Images Office documents PDF Audio/video file formats Archives HTML == Open source implementations == DocBleach ExeFilter
Read more →
Highway network

In machine learning, the Highway Network was the first working very deep feedforward neural network with hundreds of layers, much deeper than previous neural networks. It uses skip connections modulated by learned gating mechanisms to regulate information flow, inspired by long short-term memory (LSTM) recurrent neural networks. The advantage of the Highway Network over other deep learning architectures is its ability to overcome or partially prevent the vanishing gradient problem, thus improving its optimization. Gating mechanisms are used to facilitate information flow across the many layers ("information highways"). Highway Networks have found use in text sequence labeling and speech recognition tasks. In 2014, the state of the art was training deep neural networks with 20 to 30 layers. Stacking too many layers led to a steep reduction in training accuracy, known as the "degradation" problem. In 2015, two techniques were developed to train such networks: the Highway Network (published in May), and the residual neural network, or ResNet (December). ResNet behaves like an open-gated Highway Net. == Model == The model has two gates in addition to the H ( W H , x ) {\displaystyle H(W_{H},x)} gate: the transform gate T ( W T , x ) {\displaystyle T(W_{T},x)} and the carry gate C ( W C , x ) {\displaystyle C(W_{C},x)} . The latter two gates are non-linear transfer functions (specifically sigmoid by convention). The function H {\displaystyle H} can be any desired transfer function. The carry gate is defined as: C ( W C , x ) = 1 − T ( W T , x ) {\displaystyle C(W_{C},x)=1-T(W_{T},x)} while the transform gate is just a gate with a sigmoid transfer function. == Structure == The structure of a hidden layer in the Highway Network follows the equation: y = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ C ( x , W C ) = H ( x , W H ) ⋅ T ( x , W T ) + x ⋅ ( 1 − T ( x , W T ) ) {\displaystyle {\begin{aligned}y=H(x,W_{H})\cdot T(x,W_{T})+x\cdot C(x,W_{C})\\=H(x,W_{H})\cdot T(x,W_{T})+x\cdot (1-T(x,W_{T}))\end{aligned}}} == Related work == Sepp Hochreiter analyzed the vanishing gradient problem in 1991 and attributed to it the reason why deep learning did not work well. To overcome this problem, Long Short-Term Memory (LSTM) recurrent neural networks have residual connections with a weight of 1.0 in every LSTM cell (called the constant error carrousel) to compute y t + 1 = F ( x t ) + x t {\textstyle y_{t+1}=F(x_{t})+x_{t}} . During backpropagation through time, this becomes the residual formula y = F ( x ) + x {\textstyle y=F(x)+x} for feedforward neural networks. This enables training very deep recurrent neural networks with a very long time span t. A later LSTM version published in 2000 modulates the identity LSTM connections by so-called "forget gates" such that their weights are not fixed to 1.0 but can be learned. In experiments, the forget gates were initialized with positive bias weights, thus being opened, addressing the vanishing gradient problem. As long as the forget gates of the 2000 LSTM are open, it behaves like the 1997 LSTM. The Highway Network of May 2015 applies these principles to feedforward neural networks. It was reported to be "the first very deep feedforward network with hundreds of layers". It is like a 2000 LSTM with forget gates unfolded in time, while the later Residual Nets have no equivalent of forget gates and are like the unfolded original 1997 LSTM. If the skip connections in Highway Networks are "without gates," or if their gates are kept open (activation 1.0), they become Residual Networks. The residual connection is a special case of the "short-cut connection" or "skip connection" by Rosenblatt (1961) and Lang & Witbrock (1988) which has the form x ↦ F ( x ) + A x {\displaystyle x\mapsto F(x)+Ax} . Here the randomly initialized weight matrix A does not have to be the identity mapping. Every residual connection is a skip connection, but almost all skip connections are not residual connections. The original Highway Network paper not only introduced the basic principle for very deep feedforward networks, but also included experimental results with 20, 50, and 100 layers networks, and mentioned ongoing experiments with up to 900 layers. Networks with 50 or 100 layers had lower training error than their plain network counterparts, but no lower training error than their 20 layers counterpart (on the MNIST dataset, Figure 1 in ). No improvement on test accuracy was reported with networks deeper than 19 layers (on the CIFAR-10 dataset; Table 1 in ). The ResNet paper, however, provided strong experimental evidence of the benefits of going deeper than 20 layers. It argued that the identity mapping without modulation is crucial and mentioned that modulation in the skip connection can still lead to vanishing signals in forward and backward propagation (Section 3 in ). This is also why the forget gates of the 2000 LSTM were initially opened through positive bias weights: as long as the gates are open, it behaves like the 1997 LSTM. Similarly, a Highway Net whose gates are opened through strongly positive bias weights behaves like a ResNet. The skip connections used in modern neural networks (e.g., Transformers) are dominantly identity mappings.
Read more →
SWILE

SWILE (formerly: Lunchr) is a French app-based company that focuses on improving the employee experience. Among others, the platform offers meal vouchers, gift vouchers, mobility vouchers, and business travel solutions. In March 2020, it was renamed SWILE and entered the lunch break and meal voucher market. == History == The company was founded as Lunchr by Loïc Soubeyrand in 2016. Originally, Lunchr was an app for pre-ordering lunch on the spot or to go. In January 2017, the company raised €2.5 million in seed funding from Daphni. In 2018, the company raised €11 million (series A) from Idinvest, followed by another €30 million in February 2019 (series B), notably from Index Ventures and Kima Ventures. In January 2020, Lunchr became one of the first startups to join the French Tech 120. A few months later, in March, Lunchr diversified its services, adding team life management tools and changing its brand name to Swile. In June 2020, the company raised €70 million more in a new round of financing (Series C) from the same investors and the BPI. In November 2020, Swile acquired Briq, a startup specializing in employee engagement. In January 2021, Swile won a tender with Carrefour and distributed 62,000 Swile cards to its employees. In early October 2021, a new $200 million (€175 million) fundraising round, in which Japanese Softbank joined other investors, allowed Swile to capitalize on $1 billion. President Emmanuel Macron cited the company as "a further proof that FrenchTech is at the forefront internationally." In May 2022, the company acquired the travel management start-up Okarito for €6 million. == Overview == Swile operates in two countries (France and Brazil) and has a total of 1000 employees, 5.5 million users and 85,000 corporate customers, including Carrefour, Le Monde, JCDECAUX, PSG, Airbnb, Spotify, Red Bull, and TikTok in the private sector, as well as numerous local authorities and ministerial references in the public sector.
Read more →
List of Ruby software and tools

This is a list of software and programming tools for the Ruby programming language, which includes libraries, web frameworks, implementations, tools, and related projects. == Web tools == Capistrano (software) – remote server automation tool Mongrel – Ruby web server Rack – interface between web servers and web applications Ruby on Rails – full-stack web application framework Sinatra – lightweight Ruby web application framework Spree Commerce – e-commerce platform WEBrick – Ruby HTTP server toolkit == Libraries == BioRuby – bioinformatics and computational biology library for Ruby Bogus – Ruby library for creating reliable test doubles with contract verification ERuby – embedded Ruby templating EventMachine – event-driven I/O library Factory Bot – test fixtures library Fat comma – Ruby library for JSON-like hash syntax Geocoder – Ruby library for geocoding and reverse geocoding addresses Haml – HTML templating engine Markaby – HTML generation via Ruby Nokogiri – XML/HTML parsing library RSpec – behavior-driven testing framework for Ruby RubyGems – package manager for Ruby libraries and applications Sass – CSS preprocessor Sidekiq – background job framework for Ruby, used to handle asynchronous tasks. Uconv – Unicode text conversion library Watir – web application testing framework == Ruby implementations == HotRuby – Ruby interpreter implemented in JavaScript, enabling Ruby code to run in web browsers. IronRuby – Ruby for .NET platform JRuby – Ruby on the Java Virtual Machine MacRuby – Ruby implementation for macOS Mod ruby – Apache module that embeds the Ruby interpreter to improve performance of Ruby web applications Mruby – lightweight Ruby interpreter Rubinius – alternative Ruby implementation, based loosely on the Smalltalk-80 Blue Book design. Ruby MRI – the standard Ruby interpreter YARV – "Yet Another Ruby VM," the bytecode interpreter used in modern Ruby implementations == Tools == Homebrew – package manager for macOS and Linux written in Ruby Pry – interactive Ruby shell Rake – build and task management Ruby Version Manager – environment manager RubyCocoa – bridge between Ruby and Cocoa RubyForge – project hosting site RubyMotion – for iOS/macOS development RubySpec – language specification tests == Integrated Development Environments == Aptana Studio — integrated RadRails plugin for Ruby on Rails development Eclipse DLTK Ruby Plugin — Ruby development plugin for Eclipse Eric — open-source Python-based IDE with Ruby support Komodo IDE — commercial cross-platform IDE with Ruby support RubyMine — commercial IDE for Ruby and Rails by JetBrains SlickEdit — commercial cross-platform IDE with Ruby support == List of websites using Ruby on Rails == Airbnb Basecamp Diaspora – decentralized social network application built with Ruby on Rails Discourse – open-source discussion platform built with Ruby on Rails Fiverr GitHub Hulu Shopify SoundCloud Twitch Zendesk
Read more →