AI Assistant Reddit

AI Assistant Reddit — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Ciscogate

    Ciscogate

    Ciscogate, also known as the Black Hat Bug, is the name given to a legal incident that occurred at the Black Hat Briefings security conference in Las Vegas, Nevada, on July 27, 2005. On the morning of the first day of the conference, July 26, 2005, some attendees noticed that 30 pages of text had been physically ripped out of the extensive conference presentation booklet the night before at the request of Cisco Systems and the CD-ROM with presentation slides was not included. It was determined the pages covered a talk to be given by Michael Lynn, a security researcher with Atlanta-based IBM Internet Security Systems (ISS). Instead of the pages with the details, attendees found a photographed copy of a notice from Black Hat saying "Due to some last minute changes beyond Black Hat's control, and at the request of the presenter, the included materials aren't up to the standards Black Hat tries to meet. Black Hat will be the first to apologize. We hope the vendors involved will follow suit." According to Lynn's lawyer, his employer had approved of the talk leading up to the conference but changed their minds two days before the scheduled talk, forbidding him from presenting. Lynn's original presentation was to cover a vulnerability in Cisco routers. The presentation was one of four scheduled to follow Jeff Moss' keynote address on the first day of the conference, titled "Cisco IOS Security Architecture". After being told by his employer that he could not present on the topic, Lynn chose an alternate topic. Cisco and ISS had offered to give new joint presentation but this was turned down by Black Hat because the original speaking slot was given to Lynn, not Cisco. Lynn's presentation began by covering security issues in services that allow users to make Voice over IP telephone calls. Shortly after beginning the presentation Lynn changed back to his original topic and began disclosing some technical details of the vulnerability he found in Cisco routers stating that he would rather resign from his job at ISS than keep the details private. == Lawsuit == Shortly after Lynn concluded his talk he met Jennifer Granick, who would soon become his lawyer. During their initial meeting Lynn told Granick that he expected to be sued. Later in the evening Lynn had heard that Cisco and ISS had filed a lawsuit and requested a temporary restraining order against Black Hat but not himself. A public relations representative from Black Hat told Granick that the lawsuit was against both Black Hat and Lynn and that the companies had scheduled an Ex parte hearing in San Francisco the next morning to request the restraining order. That night, Andrew Valentine, an attorney for ISS and Cisco called Lynn who directed them to Granick. During the conversation Valentine explained the claims and accusations against Lynn, which included three things: 1) ISS claimed copyright over the presentation that Lynn gave, 2) Cisco claimed copyright over the decompiled machine code obtained from the router which was included in the presentation, and 3) Cisco claimed the presentation contained trade secrets. These complaints were outlined in a civil complaint at the U.S. Northern District of California and filed against both Lynn and Black Hat. According to Granick, she and Valentine were able agree to an injunction to settle the case without court proceedings. This deal was almost called off due to an inadvertent mistake by Black Hat in which they had restored Lynn's presentation on their web server. Black Hat, Granick, and the plaintiff's lawyers were able to resolve this problem and the deal stood. One condition of the settlement required Lynn to provide an image of all computer data he used in his research to be provided to a third party for forensic analysis before erasing his research and any Cisco data from his systems. The settlement also stipulated that Lynn was prohibited from talking about the vulnerability in the future. == FBI Investigation == Shortly after lawyers for Lynn and ISS / Cisco filed settlement papers, FBI agents from the Las Vegas office arrived at the conference to begin asking questions. According to Granick, they were there at the request of the Atlanta FBI office and Lynn was not of interest. Granick asserted the Fifth and Sixth amendment rights on behalf of her client, Lynn. Granick asserted his rights for the Atlanta office and asked if an arrest warrant had been issued for Lynn. Over the next 24 hours Granick was not able to ascertain the status of a warrant but ultimately determined no warrant was issued. When the FBI was asked about the case by a journalist, spokesman Paul Bresson declined to discuss the case saying "Our policy is to not make any comment on anything that is ongoing. That's not to confirm that something is, because I really don't know". Granick would only confirm to journalists that the "investigation has to do with the presentation". == Response == === Attendees === Attendees of Black Hat Briefings, as well as many that also attended DEF CON, were not happy with vendors threatening legal action over vulnerability disclosure. The term "Ciscogate" was coined quickly by an unknown person, but some attendees were quick to create shirts to commemorate the incident. === Cisco === Mojgan Khalili, a senior manager for corporate PR at Cisco, issued a statement to the press saying "It is important to note that the information Mr. Lynn presented was not a disclosure of a new vulnerability or a flaw with Cisco IOS software. Mr. Lynn's research explores possible ways to expand exploitations of existing security vulnerabilities impacting routers." === ISS === Kim Duffy, managing director of ISS Australia, was asked about ISS's response to the incident. Duffy responded that it was "business as usual" as the company handled the incident "strictly by the book". He gave a brief statement to ZDNet UK saying "ISS has published rules for disclosure and that is what we stick to. We didn't care to publish [the disclosure] because we were not ready. We had not completed the research to our satisfaction so it was not ready to be disclosed". ISS spokesperson Roger Fortier confirmed that Lynn was no longer employed with the company and that ISS was still working with Cisco on the matter. He gave a statement to the Washington Post saying "ISS and Cisco have been working on this in the background and didn't feel at this time that the material was ready for publication. The decision was made on Monday to pull the presentation because we wanted to make sure the research was fully baked."

    Read more →
  • Prism Video Converter

    Prism Video Converter

    Prism is a multi-format video converter developed by NCH Software for Windows and Mac OS. It offers converting tools for instant media conversions. Prism Video Converter can handle large and high-quality resolution media files. It provides built-in compressor and adjuster settings, allowing users to customize and optimize their videos according to their needs. The software also includes features such as previewing videos and adding effects. Prism offers a free version for non-commercial use as well as a premium version. == Features == Prism Video File Converter supports a wide range of file formats. It enables users to convert videos into formats like AVI, ASF, WMV, MP4, 3GP, etc. It offers the ability to convert DVDs into various formats. It provides tools for adjusting colour and filter options. Prism Video File Converter provides several customizable options for tweaking the output files during the conversion process. Users can adjust compression/encoder rates, set the resolution and frame rate, and specify the desired output file size. The software also offers various effects like video rotation, captions, watermarks, and text overlay. It also includes a built-in preview feature, that enables users to view their videos before and after the conversion process. It supports batch conversion and running conversion in background. == Controversy == Previously, Prism and certain other NCH Software products were bundled with optional browser plugins, including the Google Chrome toolbar and the Conduit toolbar. This resulted in user complaints and raised concerns from antivirus software companies like Norton and McAfee, which flagged them as potential malware. NCH Software has since removed all toolbars, browsers, and third-party app offerings in all Prism versions.

    Read more →
  • Tribute (website)

    Tribute (website)

    Tribute is an American video-sharing website headquartered in Brooklyn. Created in 2014 by Andrew Horn and Rory Petty, the platform lets customers create video montages (called "tributes") for occasions including weddings, birthdays, anniversaries, get well soon, and memorials. Tribute.co allows users to record video messages, request submissions from friends and family, insert photos, add music, and send the resulting video tribute montage to a recipient. == Overview == Tribute's collaborative technology starts with inviting people to contribute via email, SMS or social media. Participants receive a prompt to record a short video via their phone, computer or tablet. The site's video editing software allows users to drag and drop the clips in their desired order without prior video editing experience. == History == When Andrew Horn turned twenty-seven, his girlfriend, Miki Agrawal surprised him with a video montage containing clips of his family and closest friends explaining why they loved him. This resulted in Andrew's idea to create Tribute–a "living eulogy" video-compilation service that he co-founded with software engineer Rory Petty. Founded in 2014, Tribute's activity accelerated in 2020 due to the COVID-19 pandemic, and it had sent over 5 million videos as of December 2021. While social distance restrictions were in effect, the site provided a way for people to connect while in-person celebrations were put on hold. For each video sold, Tribute makes one available to hospitals for free and has partnered with Cleveland Clinic Cancer Center in Ohio, Lurie Children's Hospital in Illinois and CarePoint Health in New Jersey.

    Read more →
  • Articulatory speech recognition

    Articulatory speech recognition

    Articulatory speech recognition means the recovery of speech (in forms of phonemes, syllables or words) from acoustic signals with the help of articulatory modeling or an extra input of articulatory movement data. Speech recognition (or automatic speech recognition, acoustic speech recognition) means the recovery of speech from acoustics (sound wave) only. Articulatory information is extremely helpful when the acoustic input is in low quality, perhaps because of noise or missing data. Measurable information from the articulatory system (e.g. tongue, jaw movements) can supplement acoustic signals to improve phone recognition accuracy by 2%. However, attempts to estimate articulatory data from acoustic signals alone have not significantly enhanced recognition performance.

    Read more →
  • TAChart

    TAChart

    TAChart is a component for the Lazarus IDE that provides charting services. Similar to Tchart and Teechart for Delphi it supports a collection of different chart types including bar charts, pie charts, line charts and point series. Apart from a screen canvas, output is possible in form of SVG, OpenGL, printer, WMF, and other formats. TAChart is bundled with the Lazarus Component Library. Although not intended to be a TChart clone, why its usage differs in certain points, its basic functionality is very similar and some source code written for TeeChart may be reused. == History == The first version of TAChart was developed by Philippe Martinole for the TeleAuto project, a program for automation of astronomic observations. Later functionality was introduced by Luis Rodrigues while porting the Epanet application from Delphi to Lazarus. In the ensuing years the code has extensively rewritten, expanded and is now maintained by Alexander Klenin. == Data sources == TAChart is able to use input from various sources. Examples include lists of real values, user defined buffers in the computer's memory, vectors of random values, fields in databases, calculated values provided by pre-defined functions and results of embedded code written in Pascal Script

    Read more →
  • International Speech Communication Association

    International Speech Communication Association

    The International Speech Communication Association (ISCA) is a non-profit organization and one of the two main professional associations for speech communication science and technology, the other association being the IEEE Signal Processing Society. == Purpose == The purpose of the International Speech Communication Association (ISCA) is to promote the study and application of automatic speech processing, including speech recognition and synthesis, as well as related areas such as speaker recognition and speech compression. The association's activities cover all aspects of speech processing, including computational, linguistic, and theoretical aspects. The primary goal of the International Speech Communication Association (ISCA) is to advance the field of automatic speech processing and communication technology through research, education, and collaboration. By promoting the study and application of speech technologies such as speech recognition, speech synthesis, speaker recognition, and speech compression, ISCA aims to foster innovation and development in the areas of human-computer interaction, telecommunications, and multimedia applications. ISCA serves as a platform for researchers, academics, industry professionals, and students to exchange knowledge, share best practices, and foster interdisciplinary dialogue in the field of speech communication science. Through conferences, workshops, publications, and educational initiatives, ISCA seeks to enhance the understanding of speech processing mechanisms, improve the accuracy and efficiency of speech technologies, and explore new frontiers in the realm of human language communication. Furthermore, ISCA plays a crucial role in promoting international collaboration and networking among professionals in the speech communication community. By facilitating partnerships and cooperation between individuals and organizations worldwide, ISCA seeks to drive global progress in speech technology research and application, ultimately contributing to the advancement of communication systems, accessibility tools, and interactive interfaces that benefit society as a whole. == Conferences == ISCA organizes yearly the Interspeech conference. Most recent Interspeech: 2013 Lyon, France 2014 Singapore 2015 Dresden, Germany 2016 San Francisco, US 2017 Stockholm, Sweden 2018 Hyderabad, India 2019 Graz, Austria 2020 Shanghai, China (fully virtual) 2021 Brno, Czechia (hybrid) 2022 Incheon, South Korea 2023 Dublin, Ireland 2023 Kos Island, Greece Forthcoming Interspeech: 2025 Rotterdam, the Netherlands == ISCA board == The ISCA president for 2023-2025 is Odette Scharenborg. The vice president is Bhuvana Ramabhadran and the other members are professionals in the field. == History of ISCA == The precursor to Interspeech was a conference called Eurospeech, first held in 1989 and organised by Jean-Pierre Tubach. It was the conference of the European Speech Communication Association (ESCA), itself the precursor of the International Speech Communication Association (ISCA). A year later another conference on speech science and technology was started: the International Conference on Spoken Language Processing (ICSLP), which was founded in 1990 by Hiroya Fujisaki. The first ISCA (vs. ESCA) event was the merging of Eurospeech and ICSLP to create ICSLP-Interspeech, held in Beijing, China in 2000. This was followed by Eurospeech-Interspeech, which was held in Aalborg, Denmark in 2001. In 2007, the Eurospeech and ICSLP parts of the conference names were dropped and Interspeech became the name of the yearly conference (first Interspeech location: Antwerp, Belgium).

    Read more →
  • Signal transfer function

    Signal transfer function

    The signal transfer function (SiTF) is a measure of the signal output versus the signal input of a system such as an infrared system or sensor. There are many general applications of the SiTF. Specifically, in the field of image analysis, it gives a measure of the noise of an imaging system, and thus yields one assessment of its performance. == SiTF evaluation == In evaluating the SiTF curve, the signal input and signal output are measured differentially; meaning, the differential of the input signal and differential of the output signal are calculated and plotted against each other. An operator, using computer software, defines an arbitrary area, with a given set of data points, within the signal and background regions of the output image of the infrared sensor, i.e. of the unit under test (UUT), (see "Half Moon" image below). The average signal and background are calculated by averaging the data of each arbitrarily defined region. A second order polynomial curve is fitted to the data of each line. Then, the polynomial is subtracted from the average signal and background data to yield the new signal and background. The difference of the new signal and background data is taken to yield the net signal. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. color-correlated temperature, pixel intensity, etc.). The slope of the linear portion of this curve is then found using the method of least squares. == SiTF curve == The net signal is calculated from the average signal and background, as in signal to noise ratio (imaging)#Calculations. The SiTF curve is then given by the signal output data, (net signal data), plotted against the signal input data (see graph of SiTF to the right). All the data points in the linear region of the SiTF curve can be used in the method of least squares to find a linear approximation. Given n {\displaystyle n\,} data points ( x i , y i ) {\displaystyle (x_{i}\,,y_{i}\,)} a best fit line parameterized as y = m x + b {\displaystyle y=mx+b\,} is given by: m = ∑ x i y i n − ∑ x i n ∑ y i n ∑ x i 2 n − ( ∑ x i n ) 2 b = ∑ y i n − m ∑ x i n {\displaystyle m={\frac {{\frac {\sum x_{i}y_{i}}{n}}-{\frac {\sum x_{i}}{n}}{\frac {\sum y_{i}}{n}}}{{\frac {\sum x_{i}^{2}}{n}}-({\frac {\sum x_{i}}{n}})^{2}}}\qquad \qquad b={\frac {\sum y_{i}}{n}}-m{\frac {\sum x_{i}}{n}}}

    Read more →
  • VGACAD

    VGACAD

    VGACAD was the parent of a suite of shareware graphic utilities made for the MS-DOS operating system used in the IBM PC and clones. It was popular for editing and capturing images using BSAVE (graphics image format) and provided an early graphic editing suite compatible with multiple graphic cards and resolutions, used on the IBM PC. == Usage == Written by Lawrence Gozum in 1987, it was the genesis of multiple versions and improvements over 10 years. Ran with his brother, Marvin initially helped with design ideas, strategic focus, technical support calls, and managing the early shareware business. The growth of the VGACAD suite grew quickly to preoccupy most of their time. Lawrence then focused more of his efforts on software and formed Applied Insights, to manage VGACAD and its offspring, VidFun, and Ai Picture Explorer. At its peak, its users ranged from individuals, Federal government offices, museums and major newspapers. == Features == VGACAD was a misnomer, and meant VGA-Computer Assisted Drawing, rather than computer-aided design, as CAD is commonly referred to today. Its longevity was due to its color accuracy, speed, small size, and that its suite of small utilities often worked stand-alone. One called VGACAP, for 'capture', dumped video memory into a file that could later be converted to popular graphic image formats, later made commonplace when Microsoft Windows programmed the print screen key to dump graphics into the clipboard. However, VGACAP ran insulated apart from early versions of Windows, and thus could capture screens were applications prohibited such function.

    Read more →
  • Gooch shading

    Gooch shading

    Gooch shading is a non-photorealistic rendering technique for shading objects. It is also known as "cool to warm" shading, and is widely used in technical illustration. == History == Gooch shading was developed by Amy Gooch et al. at the University of Utah School of Computing and first presented at the 1998 SIGGRAPH conference. It has since been implemented in shader libraries, software, and games released by Autodesk, Nvidia, and Valve. == Process == Gooch shading defines an additional two colors in conjunction with the original model color: a warm color (such as yellow) and a cool color (such as blue). The warm color indicates surfaces that are facing toward the light source while the cool color indicates surfaces facing away. This allows shading to occur only in mid-tones so that edge lines and highlights remain visually prominent. The Gooch shader is typically implemented in two passes: all objects in the scene are first drawn with the "cool to warm" shading, and in the second pass the object's edges are rendered in black.

    Read more →
  • Alipay

    Alipay

    Alipay (simplified Chinese: 支付宝; traditional Chinese: 支付寶; pinyin: zhīfùbǎo) is a third-party mobile and online payment platform, established in Hangzhou, China, in February 2004 by Alibaba Group and its founder Jack Ma. In 2015, Alipay moved its headquarters to Pudong, Shanghai, although its parent company Ant Financial remains Hangzhou-based. Alipay overtook PayPal as the world's largest mobile (digital) payment platform in 2013. As of June 2020, Alipay serves over 1.3 billion users and 80 million merchants. According to the statistics of the fourth quarter of 2018, Alipay has a 55.32% share of the third-party payment market in mainland China, and it continues to grow. Along with WeChat, Alipay has been described to be China's super-app with a wide range of functionalities including ridesharing, travel booking and medical appointments. == History == The service was first launched in 2003, by Taobao. The People's Bank of China, China's central bank, issued licensing regulations in June 2010 for third-party payment providers. It also issued separate guidelines for foreign-funded payment institutions. Because of this, Alipay, which accounted for half of China's non-bank online payment market, was restructured as a domestic company controlled by Alibaba CEO Jack Ma in order to facilitate the regulatory approval for the license. The 2010 transfer of Alipay's ownership was controversial, with media reports in 2011 that Yahoo! and Softbank (Alibaba Group's controlling shareholders) were not informed of the sale for nominal value. Chinese business publication Century Weekly criticised Ma, who stated that Alibaba Group's board of directors was aware of the transaction. The incident was criticised in foreign and Chinese media as harming foreign trust in making Chinese investments. The ownership dispute was resolved by Alibaba Group, Yahoo!, and Softbank in July 2011. In 2013, Alipay launched a financial product platform called Yu'e Bao. Alipay partnered with Tianhong Asset Management to launch the it. Yu'e Bao offers an online money market account in which Alipay customers can deposit money and receive a higher interest rate than that available from banks. It soon became China's largest online money market fund and prompted competitors like Baidu and Tencent to introduce alternatives. Alibaba (the parent company of Alipay) reported having 152 million Yu'e Bao users in mid-2016, with 810 billion RMB (US$117 billion) in funds under management. In 2015, Alipay's parent company was re-branded as Ant Financial Services Group. In 2017, Alipay unveiled their facial recognition payment service. In 2020, Alipay upgraded from a payment financial instrument to an open platform for digital life. In 2021, the mandate by the Ministry of Industry and Information Technology (MIIT) to open up the "walled garden" ecosystems of the major tech companies has led to the introduction of interoperability of payment QR codes of Alipay and competing WeChat Pay and UnionPay's Cloud QuickPass platforms. In response to the increase in Alipay's payment volume due to use on Alibaba's e-commerce sites and others, Chinese regulators introduced new rules in 2020. The new rules focused on Alipay because the payment volume exploded due to its use on Alibaba's e-commerce sites and other platforms. By the second quarter in 2020, Alipay held 55.6% of China's third party mobile payment market. The People's Bank of China made rules that required payment firms to place money with regulators and anti-monopoly reviews would be triggered if the amount exceeded 50% market share. The rules included that the People's Bank of China mandate an online-payment clearing route through the NetsUnion Clearing Corporation, a centralized, state-overseen clearing body, and that unused consumer funds be held by a third-party payment provider in a non-interest-bearing account. These measures increased transparency and reduced systemic risk. When Alipay operates outside of China, it must comply with local financial regulations, which may treat specific functions such as money-market funds or investment-linked products. In Singapore, such services may require prior authorization from securities or financial-services regulators before they can be offered to residents. == Services == Alipay states that it operates with more than 65 financial institutions including Visa and MasterCard to provide payment services for Taobao and Tmall as well as more than 460,000 online and local Chinese businesses. Alipay is used in smartphones with their Alipay Wallet app. QR code payment codes are used for local in-store payments. The Alipay app also provides features such as credit card bill payments, bank account managements, P2P transfer, prepay mobile phone top-up, bus and train ticket purchases, food orders, vehicles for hire, insurance selections and a digital identification document storage. Alipay also allows online check-out on most Chinese-based websites such as Taobao and Tmall. The Alipay app allows users to add their own services provided from different companies to create a more personalised experience. Since late 2008, Alipay has promoted public service payment services and has covered more than 300 cities nationwide, supporting more than 1,200 partner organizations. In addition to utility bills such as water and electricity, Alipay also extends their services to areas such as paying transportation fines, property fees, and cable television fees. Common online payment services also include hydropower coal payment, tuition payment and traffic fine. On 15 January 2009, Alipay launched a credit card repayment service, supporting 39 domestic bank-issued credit cards. It is currently the most popular third-party repayment platform. The main advantages are free credit card bills checking, repayments with no administrative fee, as well as automatic repayment, repayment reminders and other value-added services. In the first quarter of 2014, 76% of credit cards were also paid by Alipay Wallet. From December 2013, several chain convenience store companies, including Meiyijia, Hongqi Chain, and Qishiduo C-STORE and 7-Eleven, have successively supported Alipay payment; in December, Beijing taxi drivers began to accept Alipay to pay the fare. Subsequently, Wanda Cinema, Joy City, Wangfujing and other large-scale retail companies as well as movie theaters, KTV, and catering companies have access to Alipay. From 26 March 2019, the service fee will be charged for the payment of credit card through Alipay. Customers only pay the portion of the payment that exceeds 2,000 yuan at 0.1%. In addition to this, in 2019, Walgreens accepted Alipay as payment in 3,000 US stores. Walgreen's products are available to Chinese customers through Alibaba's Tmall online marketplace. The payment application can also be used on Alibaba.com's site and Taobao as a means of payment. A Nielsen report suggests that over 90% of Chinese tourists would be willing to use mobile payment overseas if given the option. Many Chinese tourists do not have international credit cards, and so Alipay is a payment option. Digital payments have become the norm in China as the government pushes a cashless system even in rural and village areas. In November 2019, Alipay introduced Tourpass, a service component that allows non-Chinese users to use its mobile payment feature by pre-loading Chinese Yuan equivalent foreign currency into the app. In 2020, Alipay used a QR code system to help in containing the COVID-19 outbreak. The health code system tags users one of three colors according to their location, basic health information and travel history. "Beauty filters" were included to Alipay's face-scan payment system in a new upgrade that was released in July 2019. The market has responded well to the "beauty filters," which make users seem better when they use the program to make payments. Alipay Tap is a payment function launched by Alipay in July 2024. Alipay+ NFC enables wallets to offer tap-to-pay acceptance across Mastercard's global contactless network, all within your existing wallet infrastructure. == Foreign expansion == Outside of China, more than 300 worldwide merchants use Alipay to sell directly to consumers in China. It currently supports transactions in 18 foreign currencies. Since the launch of Alipay in the Mainland China, Ant Financial introduced a series of expansion of the services to other countries. Other than expanding into individual countries, the system would also be integrated with online payment platform providers. Ant Group had acquired a majority stake into 2C2P, a Singapore-based provider used by merchants worldwide in April 2022, and would eventually integrate Alipay with 2C2P. === Asia === ==== Bangladesh ==== In 2018, Alipay bought 20% shares in Bangladeshi mobile financial service provider bKash Limited. ==== Hong Kong ==== In 2017, Ant Financial expanded to Hong Kong. In a joint venture with CK Hutchison, as Alipay Payment Ser

    Read more →
  • Turret lathe

    Turret lathe

    A turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are usually interchangeable. It evolved from earlier lathes with the addition of the turret, which is an indexable toolholder that allows multiple cutting operations to be performed, each with a different cutting tool, in easy, rapid succession, with no need for the operator to perform set-up tasks in between (such as installing or uninstalling tools) or to control the toolpath. The latter is due to the toolpath's being controlled by the machine, either in jig-like fashion, via the mechanical limits placed on it by the turret's slide and stops, or via digitally-directed servomechanisms for computer numerical control lathes. The name derives from the way early turrets took the general form of a flattened cylindrical block mounted to the lathe's cross-slide, capable of rotating about the vertical axis and with toolholders projecting out to all sides, and thus vaguely resembled a swiveling gun turret. Capstan lathe is the usual name in the UK and Commonwealth, though the two terms are also used in contrast: see below, Capstan versus turret. == History == Turret lathes became indispensable to the production of interchangeable parts and for mass production. The first turret lathe was built by Stephen Fitch in 1845 to manufacture screws for pistol percussion parts. In the mid-nineteenth century, the need for interchangeable parts for Colt revolvers enhanced the role of turret lathes in achieving this goal as part of the "American system" of manufacturing arms. Clock-making and bicycle manufacturing had similar requirements. Christopher Spencer invented the first fully automated turret lathe in 1873, which led to designs using cam action or hydraulic mechanisms. From the late-19th through mid-20th centuries, turret lathes, both manual and automatic (i.e., screw machines and chuckers), were one of the most important classes of machine tools for mass production. They were used extensively in the mass production for the war effort in World War II. The U.S. company Warner & Swasey was one of the premier brands in heavy turret lathes between the 1910s and 1960s; it became the world's largest manufacturer of such lathes by 1928. During World War II, it employed 7,000 people and produced half of the turret lathes manufactured in the United States. == Types == There are many variants of the turret lathe. They can be most generally classified by size (small, medium, or large); method of control (manual, automated mechanically, or automated via computer (numerical control (NC) or computer numerical control (CNC)); and bed orientation (horizontal or vertical). === Archetypical: horizontal, manual === In the late 1830s a "capstan lathe" with a turret was patented in Britain. The first American turret lathe was invented by Stephen Fitch in 1845. The archetypical turret lathe, and the first in order of historical appearance, is the horizontal-bed, manual turret lathe. The term "turret lathe" without further qualification is still understood to refer to this type. The formative decades for this class of machine were the 1840s through 1860s, when the basic idea of mounting an indexable turret on a bench lathe or engine lathe was born, developed, and disseminated from the originating shops to many other factories. Some important tool-builders in this development were Stephen Fitch; Gay, Silver & Co.; Elisha K. Root of Colt; J.D. Alvord of the Sharps Armory; Frederick W. Howe, Richard S. Lawrence, and Henry D. Stone of Robbins & Lawrence; J.R. Brown of Brown & Sharpe; and Francis A. Pratt of Pratt & Whitney. Various designers at these and other firms later made further refinements. === Semi-automatic === Sometimes machines similar to those above, but with power feeds and automatic turret-indexing at the end of the return stroke, are called "semi-automatic turret lathes". This nomenclature distinction is blurry and not consistently observed. The term "turret lathe" encompasses them all. During the 1860s, when semi-automatic turret lathes were developed, they were sometimes called "automatic". What we today would call "automatics", that is, fully automatic machines, had not been developed yet. During that era both manual and semi-automatic turret lathes were sometimes called "screw machines", although we today reserve that term for fully automatic machines. === Automatic === During the 1870s through 1890s, the mechanically automated "automatic" turret lathe was developed and disseminated. These machines can execute many part-cutting cycles without human intervention. Thus the duties of the operator, which were already greatly reduced by the manual turret lathe, were even further reduced, and productivity increased. These machines use cams to automate the sliding and indexing of the turret and the opening and closing of the chuck. Thus, they execute the part-cutting cycle somewhat analogously to the way in which an elaborate cuckoo clock performs an automated theater show. Small- to medium-sized automatic turret lathes are usually called "screw machines" or "automatic screw machines", while larger ones are usually called "automatic chucking lathes", "automatic chuckers", or "chuckers". Such machine tools of the "automatic" variety, which in the pre-computer era meant mechanically automated, had already reached a highly advanced state by World War I. === Computer numerical control === When World War II ended, the digital computer was poised to develop from a colossal laboratory curiosity into a practical technology that could begin to disseminate into business and industry. The advent of computer-based automation in machine tools via numerical control (NC) and then computer numerical control (CNC) displaced to a large extent, but not at all completely, the previously existing manual and mechanically automated machines. Numerically controlled turrets allow automated selection of tools on a turret. CNC lathes may be horizontal or vertical in orientation and mount six separate tools on one or more turrets. Such machine tools can work in two axes per turret, with up to six axes being feasible for complex work. === Vertical === Vertical turret lathes have the workpiece held vertically, which allows the headstock to sit on the floor and the faceplate to become a horizontal rotating table, analogous to a huge potter's wheel. This is useful for the handling of very large, heavy, short workpieces. Vertical lathes in general are also called "vertical boring mills" or often simply "boring mills"; therefore a vertical turret lathe is a vertical boring mill equipped with a turret. == Other variations == === Capstan versus turret === The term "capstan lathe" overlaps in sense with the term "turret lathe" to a large extent. In many times and places, it has been understood to be synonymous with "turret lathe". In other times and places it has been held in technical contradistinction to "turret lathe", with the difference being in whether the turret's slide is fixed to the bed (ram-type turret) or slides on the bed's ways (saddle-type turret). The difference in terminology is mostly a matter of United Kingdom and Commonwealth usage versus United States usage. === Flat === A subtype of horizontal turret lathe is the flat-turret lathe. Its turret is flat (and analogous to a rotary table), allowing the turret to pass beneath the part. Patented by James Hartness of Jones & Lamson, and first disseminated in the 1890s, it was developed to provide more rigidity via requiring less overhang in the tool setup, especially when the part is relatively long. === Hollow-hexagon === Hollow-hexagon turret lathes competed with flat-turret lathes by taking the conventional hexagon turret and making it hollow, allowing the part to pass into it during the cut, analogously to how the part would pass over the flat turret. In both cases, the main idea is to increase rigidity by allowing a relatively long part to be turned without the tool overhang that would be needed with a conventional turret, which is not flat or hollow. === Monitor lathe === The term "monitor lathe" formerly (1860s–1940s) referred to the class of small- to medium-sized manual turret lathes used on relatively small work. The name was inspired by the monitor-class warships, which the monitor lathe's turret resembled. Today, lathes of such appearance, such as the Hardinge DSM-59 and its many clones, are still common, but the name "monitor lathe" is no longer current in the industry. === Toolpost turrets and tailstock turrets === Turrets can be added to non-turret lathes (bench lathes, engine lathes, toolroom lathes, etc.) by mounting them on the toolpost, tailstock, or both. Often these turrets are not as large as a turret lathe's, and they usually do not offer the sliding and stopping that a turret lathe's turret does; but they do offer the ability to index through successive tool

    Read more →
  • 3D-Coat

    3D-Coat

    3DCoat is a commercial digital sculpting program from Pilgway designed to create free-form organic and hard surfaced 3D models, with tools which enable users to sculpt, add polygonal topology (automatically or manually), create UV maps (automatically or manually), texture the resulting models with natural painting tools, and render static images or animated "turntable" movies. The program can also be used to modify imported 3D models from a number of commercial 3D software products by means of plugins called Applinks. Imported models can be converted into voxel objects for further refinement and for adding high resolution detail, complete UV unwrapping and mapping, as well as adding PBR textures for displacement, bump maps, specular and diffuse color maps. A live connection to a chosen external 3D application can be established through the Applink pipeline, allowing for the transfer of model and texture information. 3DCoat specializes in voxel sculpting and polygonal sculpting using dynamic patch tessellation technology and polygonal sculpting tools. It includes "auto-retopology", a proprietary skinning algorithm which generates a polygonal mesh skin over any voxel sculpture, composed primarily of quadrangles.

    Read more →
  • Screen generator

    Screen generator

    A screen generator, also known as a screen painter, screen mapper, or forms generator is a software package (or component thereof) which enables data entry screens to be generated declaratively, by "painting" them on the screen WYSIWYG-style, or through filling-in forms, rather than requiring writing of code to display them manually. 4GLs commonly incorporate a screen generator feature. They are also commonly found bundled with database systems, especially entry-level databases. A screen generator is one aspect of an application generator, which can also include other functions such as report generation and a data dictionary. The earliest screen generators were character-based; by the 1990s, GUI support became common, and then support for generating HTML forms as well. Some screen generators work by generating code to display the screen in a high-level language (for example, COBOL); others store the screen definition in a data file or in database tables, and then have a runtime component responsible for actually displaying the form and receiving and validating user input. == Examples == Examples of screen generators include: IBM Screen Definition Facility II: generates screens for CICS BMS, IMS MFS, ISPF, GDDM and CSP/AD. Performix for Informix. Microsoft Visual Basic the forms component of Microsoft Access Oracle Developer, in particular its Oracle Forms component the QDesign component of PowerHouse SystemBuilder/SB+ the Screen Painter component of SAP's ABAP Workbench the FoxView component of FoxPro. FoxView was originally developed by Luis Castro as a dBASE screen generator named ViewGen; Fox purchased it and bundled it with FoxPro 1.0. Later, Fox replaced Castro's code with their own screen painter code. dBASE included a built-in screen generator in dBASE IV onwards; in dBASE III and earlier, third party screen generators were available, including the already mentioned ViewGen DPS 1100 for UNIVAC 1100 series mainframes.

    Read more →
  • Scientific Working Group – Imaging Technology

    Scientific Working Group – Imaging Technology

    The Scientific Working Group on Imaging Technology was convened by the Federal Bureau of Investigation in 1997 to provide guidance to law enforcement agencies and others in the criminal justice system regarding the best practices for photography, videography, and video and image analysis. This group was terminated in 2015. == History == As technology has advanced through the years, law enforcement has needed to stay abreast of emerging technological advances and use these in the investigation of crime. A factor that is considered when new technology is used in these investigations is the determination of whether the use of that new technology will be admissible in court. The judicial system in the United States currently has two standards used in the determination of admissibility of testimony regarding scientific evidence; the Daubert Standard and the Frye Standard. These standards guide the courts in the admissibility of testimony derived from the use of new technologies and scientific techniques. The Federal Bureau of Investigation (FBI), seeking to address possible admissibility issues with such testimony, established Scientific Working Groups starting with the Scientific Working Group on DNA Analysis and Methods (SWGDAM) in 1988. The goal of these groups is to open lines of communication between law enforcement agencies and forensic laboratories around the world while providing guidance on the use of new and innovative technologies and techniques. This guidance can lead to admissibility of evidence and/or testimony, provided proper methods in the collection of evidence and its analysis are employed. In 2009, the National Academy of Sciences released a report entitled, "Strengthening Forensic Science in the United States: A Path Forward." This report addresses many topics including challenges and disparities facing the forensic science community, standardization, certification of practitioners and accreditation of their respective entities, problems related to the interpretation of forensic evidence, the need for research, and the admission of forensic science evidence in litigation. This report mentions the Scientific Working Groups and their role in forensic science. The history of imaging technology (photography) can be said to extend back to the times of Chinese philosopher Mo-Ti (470-390 B.C.) who described the principles behind the precursor to the camera obscura. Since that time, advances in imaging technology include the discovery of chemical photographic processes in the 19th century and the use of electronic imaging technology that includes analog video cameras and digital video and still cameras. By the mid 1990s, it was apparent that technologically advanced camera systems such as these were being adopted for use in the criminal justice system. This led the FBI to convene a meeting of individuals working in the field of forensic imaging from federal, state, local, and foreign law enforcement, and the U.S. military, during the summer of 1997. As a result of this meeting, the Technical Working Group on Imaging Technology was formed from a core group of the meeting’s participants. This group later became the Scientific Working Group on Imaging Technology (SWGIT). Prior to the inception of SWGIT, some law enforcement agencies began adopting digital imaging technology. Due to the lack of guidelines or standards, some of these agencies attempted to replace all their film cameras with substandard digital cameras, only to find that the equipment they had purchased was not capable of accomplishing the mission for which they were intended. At that time only low resolution digital cameras were deemed affordable by some law enforcement agencies. Some of these agencies were forced to rethink their photography procedures and reverted to the use of film cameras or replaced their low-resolution digital cameras with higher quality, more expensive equipment. Also lacking at this early stage was guidance on how to store and archive digital image files. When SWGIT was formed, it was tasked with providing guidance to law enforcement and others in the criminal justice system by releasing documents that describe the best practices and guidelines for the use of imaging technology, to include these concerns and many others. This group was terminated in 2015. == SWGIT Function == During its existence, SWGIT provided information on the appropriate use of various imaging technologies including both established and new. This was accomplished through the release of documents such as the SWGIT Best Practices documents. As changes in technology occurred, these documents were updated. Over the course of its existence, SWGIT collaborated with other Scientific Working Groups to address imaging concerns within their respective disciplines. SWGIT published over 20 documents that dealt specifically with imaging technology. SWGIT also co-published documents with the Scientific Working Group on Digital Evidence (SWGDE) that had a component or components dealing with imaging technology. SWGIT also provided imaging technology guidance and input for documents from the Scientific Working Group on Friction Ridge Analysis, Study and Technology (SWGFAST), the Scientific Working Group for Forensic Document Examination (SWGDOC), and the Scientific Working Group on Shoeprint and Tire Tread Evidence (SWGTREAD). SWGIT assisted the American Society of Crime Lab Directors/Laboratory Accreditation Board (ASCLD/LAB) in the writing of definitions and standards for the accreditation of Digital and Multimedia Evidence sections of crime laboratories. In addition to releasing documents, SWGIT members disseminated best practices for law enforcement professionals where imaging technology was concerned. This was carried out by attending and lecturing at meetings and conferences of various forensic organizations that included: The American Academy of Forensic Sciences (AAFS) The International Association for Identification (IAI) The Law Enforcement and Emergency Services Video Association (LEVA) The American Society of Crime Lab Directors (ASCLD) The SWGIT membership consisted of approximately fifty scientists, photographers, instructors, and managers from more than two dozen federal, state, and local law enforcement agencies, as well as from the academic and research communities. The membership elected its officers from within. SWGIT was composed of the Executive Committee, four standing subcommittees, and ad hoc subcommittees appointed on an as-needed basis. The standing subcommittees were: Image Analysis, Forensic Photography, Video, and Outreach. This group was terminated in 2015. == Legal Proceedings == The following court cases have conducted Daubert v. Merrell Dow Pharm., Inc., 509 U.S. 579 (1993) hearings in which SWGIT best practice documents have been cited as accepted protocol, methodology, and as generally accepted techniques in the forensic community: U. S. v. Rudy Frabizio, U.S. District Court, Boston, MA, 2008 (Image Authentication) U.S. v. Nobumochi Furukawa, U.S. District Court, Minnesota, 2007 (Video Authentication) U.S. v. John Stroman, U.S. District Court, South Carolina, 2007 (Facial Comparison Analysis) State of Texas v. Daniel Day, Tarrant County Texas, 2005 (Camera Identification to Images) U.S. v. Marc Watzman, U.S. District Court, Northern Illinois, 2004 (Video Authentication) U.S. v. McKreith, U.S. District Court, Fort Lauderdale, FL, 2002 (Photo comparison of shirt) == Termination == This group was unfunded by the FBI in 2015.

    Read more →
  • Picture Prowler

    Picture Prowler

    Picture Prowler was an early piece of photo management software developed around and meant to show off Xing Technology's JPEG image decompression library during the early 1990s. Little known today, it featured thumbnail based picture management, printing, etc. The primary developer was Ray Bunnage from compression / decompression libraries developed by Howard Gordon and Chris Eddy.

    Read more →