AI Assistant Jobs Remote

AI Assistant Jobs Remote — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • AI alignment

    AI alignment

    In the field of artificial intelligence (AI), alignment aims to steer AI systems toward a person's or group's intended goals, preferences, or ethical principles. An AI system is considered aligned if it advances the intended objectives. A misaligned AI system pursues unintended objectives. It is often difficult for AI designers to specify the full range of desired and undesired behaviors. Therefore, the designers often use simpler proxy goals, such as gaining human approval. But proxy goals can overlook necessary constraints or reward the AI system for merely appearing aligned. AI systems may also find loopholes that allow them to accomplish their proxy goals efficiently but in unintended, sometimes harmful, ways (reward hacking). Advanced AI systems may develop unwanted instrumental strategies, such as seeking power or self-preservation because such strategies help them achieve their assigned final goals. Furthermore, they might develop undesirable emergent goals that could be hard to detect before the system is deployed and encounters new situations and data distributions. Empirical research showed in 2024 that advanced large language models (LLMs) such as OpenAI o1 or Claude 3 sometimes engage in strategic deception to achieve their goals or prevent them from being changed. Some of these issues affect existing commercial systems such as LLMs, robots, autonomous vehicles, and social media recommendation engines. Some AI researchers argue that more capable future systems will be more severely affected because these problems partially result from high capabilities. Many prominent AI researchers and AI company leaders have argued or asserted that AI is approaching human-like (AGI) and superhuman cognitive capabilities (ASI), and could endanger human civilization if misaligned. These include "AI godfathers" Geoffrey Hinton and Yoshua Bengio and the CEOs of OpenAI, Anthropic, and Google DeepMind. These risks remain debated. AI alignment is a subfield of AI safety, the study of how to build safe AI systems. Other subfields of AI safety include robustness, monitoring, and capability control. Research challenges in alignment include instilling complex values in AI, developing honest AI, scalable oversight, auditing and interpreting AI models, and preventing emergent AI behaviors like power-seeking. Alignment research has connections to interpretability research, (adversarial) robustness, anomaly detection, calibrated uncertainty, formal verification, preference learning, safety-critical engineering, game theory, algorithmic fairness, and social sciences. == Objectives in AI == Programmers provide an AI system such as AlphaZero with an "objective function", in which they intend to encapsulate the goal(s) the AI is configured to accomplish. Such a system later populates a (possibly implicit) internal "model" of its environment. This model encapsulates all the agent's beliefs about the world. The AI then creates and executes whatever plan is calculated to maximize the value of its objective function. For example, when AlphaZero is trained on chess, it has a simple objective function of "+1 if AlphaZero wins, −1 if AlphaZero loses". During the game, AlphaZero attempts to execute whatever sequence of moves it judges most likely to attain the maximum value of +1. Similarly, a reinforcement learning system can have a "reward function" that allows the programmers to shape the AI's desired behavior. An evolutionary algorithm's behavior is shaped by a "fitness function". == Alignment problem == In 1960, AI pioneer Norbert Wiener described the AI alignment problem as follows: If we use, to achieve our purposes, a mechanical agency with whose operation we cannot interfere effectively [...] we had better be quite sure that the purpose put into the machine is the purpose which we really desire. AI alignment refers to ensuring that an AI system's objectives match some target. The target is variously defined as the goals of the system's designers or users, widely shared values, objective ethical standards, legal requirements, or the intentions its designers would have if they were more informed and enlightened. In democratic AI alignment, the target is the values and preferences of median voters, which increases political legitimacy. AI alignment is an open problem for modern AI systems and is a research field within AI. Aligning AI involves two main challenges: carefully specifying the purpose of the system (outer alignment) and ensuring that the system adopts the specification robustly (inner alignment). Researchers also attempt to create AI models that have robust alignment, sticking to safety constraints even when users adversarially try to bypass them. === Specification gaming and side effects === To specify an AI system's purpose, AI designers typically provide an objective function, examples, or feedback to the system. But designers are often unable to completely specify all important values and constraints, so they resort to easy-to-specify proxy goals such as maximizing the approval of human overseers, who are fallible. As a result, AI systems can find loopholes that help them accomplish the specified objective efficiently but in unintended, possibly harmful ways. This tendency is known as specification gaming or reward hacking, and is an instance of Goodhart's law. As AI systems become more capable, they are often able to game their specifications more effectively. Specification gaming has been observed in numerous AI systems. OpenAI GPT models for programming—including in real-world cases—have been found to explicitly plan hacking the tests used to evaluate them to falsely appear successful (e.g., explicitly stating "let's hack"). When the company penalized this, many models learned to obfuscate their plans while continuing to hack the tests. Another system was trained to finish a simulated boat race by rewarding the system for hitting targets along the track, but the system achieved more reward by looping and crashing into the same targets indefinitely. A 2025 Palisade Research study found that when tasked to win at chess against a stronger opponent, some reasoning LLMs attempted to hack the game system, for example by modifying or entirely deleting their opponent. Some alignment researchers aim to help humans detect specification gaming and steer AI systems toward carefully specified objectives that are safe and useful to pursue. When a misaligned AI system is deployed, it can have consequential side effects. Social media platforms have been known to optimize their recommendation algorithms for click-through rates, causing user addiction on a global scale. Stanford researchers say that such recommender systems are misaligned with their users because they "optimize simple engagement metrics rather than a harder-to-measure combination of societal and consumer well-being". Explaining such side effects, Berkeley computer scientist Stuart J. Russell said that the omission of implicit constraints can cause harm: "A system [...] will often set [...] unconstrained variables to extreme values; if one of those unconstrained variables is actually something we care about, the solution found may be highly undesirable. This is essentially the old story of the genie in the lamp, or the sorcerer's apprentice, or King Midas: you get exactly what you ask for, not what you want." Some researchers suggest that AI designers specify their desired goals by listing forbidden actions or by formalizing ethical rules (as with Asimov's Three Laws of Robotics). But Russell and Norvig argue that this approach overlooks the complexity of human values: "It is certainly very hard, and perhaps impossible, for mere humans to anticipate and rule out in advance all the disastrous ways the machine could choose to achieve a specified objective." Additionally, even if an AI system fully understands human intentions, it may still disregard them, because following human intentions may not be its objective (unless it is already fully aligned). === Pressure to deploy unsafe systems === Commercial organizations sometimes have incentives to take shortcuts on safety and to deploy misaligned or unsafe AI systems. For example, social media recommender systems have been profitable despite creating unwanted addiction and polarization. Competitive pressure can also lead to a race to the bottom on AI safety standards. For example, OpenAI has been sued for releasing a ChatGPT version that encouraged suicide for some unstable users, a behavior the company had overlooked amid a rushed product release. Similarly, in 2018, a self-driving car killed a pedestrian (Elaine Herzberg) after engineers disabled the emergency braking system because it was oversensitive and slowed development. === Risks from advanced misaligned AI === Some researchers are interested in aligning increasingly advanced AI systems, as progress in AI development is rapid, and industry and governments are trying to build advan

    Read more →
  • EPUAP

    EPUAP

    ePUAP (Electronic Platform of Public Administration Services) is a Polish nationwide platform for communication of citizens with public administrations in a uniform and standardized way. Built as part of the ePUAP-WKP project (State Informatization Plan). Service providers are public administration units and public institutions (especially entities that perform tasks commissioned by the state). The platform provides service providers with technological infrastructure to provide services to citizens (recipients). Among the participants of ePUAP there are both central administration units and local governments, including municipal offices. Among the services offered by ePUAP is also Profil Zaufany (Trusted Profile), which enables electronic filing with legal effect without the need to use a qualified signature and SAML-based single sign-on mechanism, which enables the same ePUAP account to log on to websites of various service providers. The website www.epuap.gov.pl enables defining citizen and businesses service processes, creates channels of access to different systems of public administration and extends the package of public services provided electronically. Services available through the ePUAP platform may be accessed at the official website. Currently all administration services are available in Polish only. == Overview == It is described by the Polish government as "a coherent and systematic action program designed and developed to allow public institutions make their electronic services available to the public". The platform provides citizens, businesses and institutions with a number of services intended to ensure smooth and safe communication between: customer to administrations (C2A), business to administration (B2A), administration to administration (A2A). === Main goals === The main project objectives are to create a single, secure and electronic access channel to public services for citizens, businesses and public administration and also to reduce time and lower the costs of sharing information resources and functionalities of administration domain systems. Within the project, the following functionalities and services were delivered: Public services catalogue – a method of presenting and describing administration services, ePUAP platform – a web platform designed to provide public services on the Internet, Interoperability portal – a portal for experts working on recommendations for electronic documents and forms used within Polish administration systems to assure the uniformity of IT standards, Central Repository of Electronic Document Models – a database for valid document models and electronic forms. == History and background == The ePUAP project was carried out in the years 2005–2008. Currently, a continuation project ePUAP2 is being carried out with the following objectives: to increase the number of online services available to the public including the registry services, to widen the scale of usage of public electronic services, to integrate subsequent systems of public administration and business on ePUAP portal, to define new processes of customer and business services. === ePUAP2 === ePUAP2 is a public and administrative project that extends the set of functional services developed during the first edition of the project and is another step in the process of transforming Poland into a modern and citizen-friendly country. The implementation period for the project covers the years 2009–2013. Project financing The cost of the project “Construction of electronic Platform of Public Administration Services” – 32 million PLN was covered in 75% by the funds from the European Regional Development Fund (under the Sector Operational Programme "Supporting Competitiveness of Enterprises for the years 2004–2006"), while the remaining 25% of the cost was covered by a Polish national co-financing. Funds for the ePUAP2 project were gained from the 7th priority axis of the Innovative Economy Operational Programme and amounts to 140 million PLN (85% of eligible expenses were covered by the European Regional Development Fund, 15% were covered by a national co-financing). The trustee of ePUAP is the Polish Ministry of the Interior and Administration. == Legal regulations == According to the Polish law from 1 May 2008, public authorities are required to accept documents in electronic form (bringing applications and proposals and other activities in electronic form). ePUAP enables public institutions to meet this requirement by providing a service infrastructure to set up am electronic inbox. The ePUAP inbox meets legal requirements, in particular: issuing an official confirmation of receipt in accordance with the regulation of the Prime Minister of 29 September 2005 on the organizational and technical conditions for the delivery of electronic documents to public entities; cooperation with hardware security modules (HSM), meeting the technical requirements set out in the law; handling documents electronically in accordance with the minimum requirements set out in the Regulation of the Polish Council of Ministers of 11 October 2005 on minimum requirements for ICT systems. == Incidents == === Crashes === The ePUAP system very often happens smaller or larger failures. Because it is used to sign the application profiles trusted also in other electronic systems such as public administration. Electronic Services Platform created by ZUS, the system fault ePUAP it very difficult to settle official matters most electronically. === "Infoafera" === According to TVN and the release of TVP News from 10 April 2014, the creation of ePUAP is also associated with the so-called "Infoafera." On 10 April 2014, the Minister of Internal Affairs of Poland confirmed the information that the American technology company HP confessed to its participation in the Polish info-tour and corruption of Polish officials. By March 2014, the construction of ePUAP and its maintenance cost PLN 98.4 million. PLN 67.8 million has been used for this project. Challenged expenses only on the portal itself is approx. PLN 20 million.

    Read more →
  • MinID

    MinID

    MinID is an electronic login system used to secure a range of internet services in the Norwegian public sector. The communication done with MinID is encrypted to secure information from unauthorized usage. Everyone registered in the Norwegian Population Register over the age of 13 years can create a public ID with MinID. As of April 2010, more than 2 million people living in Norway had created user accounts with MinID. To create a public ID, PIN-codes from the Norwegian Tax Administration are needed. == Purpose == The purpose of MinID is to communicate an electronic identity, so that users are authorized to use electronic services, in a secure way. MinID has a user database where social security numbers and PIN-codes are saved. MinID can be used to access more than 50 online services from various Norwegian public agencies, including the Norwegian Labour and Welfare Administration, the Directorate of Taxes and the State Educational Loan. == Controller == The Norwegian Digitalisation Agency (Digdir) is the controller of the personal data handled by MinID. The Norwegian Digitalisation Agency (Norwegian: Digitaliseringsdirektoratet) or Digdir is a government agency subordinate to the Ministry of Digitalisation and Public Governance. It is responsible for help the public sector achieve quality, efficiency, user friendliness, openness and participation, as well as helping the public sector be organized and led in a good way with good intersectoral cooperation. == User profile == Users of MinID have a user profile that contains their mobile phone number and/or e-mail address. This data is used to administrate MinID use. The e-mail address is needed in order to send the user a temporary password if he or she forgets the password. The phone number is needed in order to send an SMS-code at log in or a temporary password if the user forgets the password. == Transparency, correction and deletion == According to the law users can claim full access of the handling of their own personal data. Users also have the right to information about how this data are handled and saved, and how they can correct or delete inaccurate data. Users can at any time choose to delete themselves as a user of MinID. The user profile will then be deleted from the MinID user database. == Extradition to others == MinID passes on the user's social security number and chosen language to the public services he or she logs on to, so that the user can go to other public services without a new login.

    Read more →
  • Graphics address remapping table

    Graphics address remapping table

    The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.

    Read more →
  • Observability (software)

    Observability (software)

    In software engineering, more specifically in distributed computing, observability is the ability to collect data about programs' execution, modules' internal states, and the communication among components. To improve observability, software engineers use a wide range of logging and tracing techniques to gather telemetry information, and tools to analyze and use it. Observability is foundational to site reliability engineering, as it is the first step in triaging a service outage. One of the goals of observability is to minimize the amount of prior knowledge needed to debug an issue. == Etymology, terminology and definition == The term is borrowed from control theory, where the "observability" of a system measures how well its state can be determined from its outputs. Similarly, software observability measures how well a system's state can be understood from the obtained telemetry (metrics, logs, traces, profiling). The definition of observability varies by vendor: Observability is the process of making a system’s internal state more transparent. Systems are made observable by the data they produce, which in turn helps you to determine if your infrastructure or application is healthy and functioning normally. a measure of how well you can understand and explain any state your system can get into, no matter how novel or bizarre [...] without needing to ship new code software tools and practices for aggregating, correlating and analyzing a steady stream of performance data from a distributed application along with the hardware and network it runs onobservability starts by shipping all your raw data to central service before you begin analysisthe ability to measure a system’s current state based on the data it generates, such as logs, metrics, and traces Observability is tooling or a technical solution that allows teams to actively debug their system. Observability is based on exploring properties and patterns not defined in advance. proactively collecting, visualizing, and applying intelligence to all of your metrics, events, logs, and traces—so you can understand the behavior of your complex digital system The term is frequently referred to as its numeronym o11y (where 11 stands for the number of letters between the first letter and the last letter of the word). This is similar to other computer science abbreviations such as i18n and l10n and k8s. === Observability vs. monitoring === Observability and monitoring are sometimes used interchangeably. As tooling, commercial offerings and practices evolved in complexity, "monitoring" was re-branded as observability in order to differentiate new tools from the old. The terms are commonly contrasted in that systems are monitored using predefined sets of telemetry, and monitored systems may be observable. Majors et al. suggest that engineering teams that only have monitoring tools end up relying on expert foreknowledge (seniority), whereas teams that have observability tools rely on exploratory analysis (curiosity). == Telemetry types == Observability relies on three main types of telemetry data: metrics, logs and traces. Those are often referred to as "pillars of observability". === Metrics === A metric is a point in time measurement (scalar) that represents some system state. Examples of common metrics include: number of HTTP requests per second; total number of query failures; database size in bytes; time in seconds since last garbage collection. Monitoring tools are typically configured to emit alerts when certain metric values exceed set thresholds. Thresholds are set based on knowledge about normal operating conditions and experience. Metrics are typically tagged to facilitate grouping and searchability. Application developers choose what kind of metrics to instrument their software with, before it is released. As a result, when a previously unknown issue is encountered, it is impossible to add new metrics without shipping new code. Furthermore, their cardinality can quickly make the storage size of telemetry data prohibitively expensive. Since metrics are cardinality-limited, they are often used to represent aggregate values (for example: average page load time, or 5-second average of the request rate). Without external context, it is impossible to correlate between events (such as user requests) and distinct metric values. === Logs === Logs, or log lines, are generally free-form, unstructured text blobs that are intended to be human readable. Modern logging is structured to enable machine parsability. As with metrics, an application developer must instrument the application upfront and ship new code if different logging information is required. Logs typically include a timestamp and severity level. An event (such as a user request) may be fragmented across multiple log lines and interweave with logs from concurrent events. === Traces === ==== Distributed traces ==== A cloud native application is typically made up of distributed services which together fulfill a single request. A distributed trace is an interrelated series of discrete events (also called spans) that track the progression of a single user request. A trace shows the causal and temporal relationships between the services that interoperate to fulfill a request. Instrumenting an application with traces means sending span information to a tracing backend. The tracing backend correlates the received spans to generate presentable traces. To be able to follow a request as it traverses multiple services, spans are labeled with unique identifiers that enable constructing a parent-child relationship between spans. Span information is typically shared in the HTTP headers of outbound requests. === Continuous profiling === Continuous profiling is another telemetry type used to precisely determine how an application consumes resources. === Instrumentation === To be able to observe an application, telemetry about the application's behavior needs to be collected or exported. Instrumentation means generating telemetry alongside the normal operation of the application. Telemetry is then collected by an independent backend for later analysis. In fast-changing systems, instrumentation itself is often the best possible documentation, since it combines intention (what are the dimensions that an engineer named and decided to collect?) with the real-time, up-to-date information of live status in production. Instrumentation can be automatic, or custom. Automatic instrumentation offers blanket coverage and immediate value; custom instrumentation brings higher value but requires more intimate involvement with the instrumented application. Instrumentation can be native - done in-code (modifying the code of the instrumented application) - or out-of-code (e.g. sidecar, eBPF). Verifying new features in production by shipping them together with custom instrumentation is a practice called "observability-driven development". == "Pillars of observability" == Metrics, logs and traces are most commonly listed as the pillars of observability. Majors et al. suggest that the pillars of observability are high cardinality, high-dimensionality, and explorability, arguing that runbooks and dashboards have little value because "modern systems rarely fail in precisely the same way twice." == Self monitoring == Self monitoring is a practice where observability stacks monitor each other, in order to reduce the risk of inconspicuous outages. Self monitoring may be put in place in addition to high availability and redundancy to further avoid correlated failures.

    Read more →
  • Foreign key

    Foreign key

    A foreign key is a set of attributes in a table that refers to the primary key of another table, linking these two tables. In the context of relational databases, a foreign key is subject to an inclusion dependency constraint that the tuples consisting of the foreign key attributes in one relation, R, must also exist in some other (not necessarily distinct) relation, S; furthermore that those attributes must also be a candidate key in S. In other words, a foreign key is a set of attributes that references a candidate key. For example, a table called TEAM may have an attribute, MEMBER_NAME, which is a foreign key referencing a candidate key, PERSON_NAME, in the PERSON table. Since MEMBER_NAME is a foreign key, any value existing as the name of a member in TEAM must also exist as a person's name in the PERSON table; in other words, every member of a TEAM is also a PERSON. == Summary == The table containing the foreign key is called the child table, and the table containing the candidate key is called the referenced or parent table. In database relational modeling and implementation, a candidate key is a set of zero or more attributes, the values of which are guaranteed to be unique for each tuple (row) in a relation. The value or combination of values of candidate key attributes for any tuple cannot be duplicated for any other tuple in that relation. Since the purpose of the foreign key is to identify a particular row of referenced table, it is generally required that the foreign key is equal to the candidate key in some row of the primary table, or else have no value (the NULL value.). This rule is called a referential integrity constraint between the two tables. Because violations of these constraints can be the source of many database problems, most database management systems provide mechanisms to ensure that every non-null foreign key corresponds to a row of the referenced table. For example, consider a database with two tables: a CUSTOMER table that includes all customer data and an ORDER table that includes all customer orders. Suppose the business requires that each order must refer to a single customer. To reflect this in the database, a foreign key column is added to the ORDER table (e.g., CUSTOMERID), which references the primary key of CUSTOMER (e.g. ID). Because the primary key of a table must be unique, and because CUSTOMERID only contains values from that primary key field, we may assume that, when it has a value, CUSTOMERID will identify the particular customer which placed the order. However, this can no longer be assumed if the ORDER table is not kept up to date when rows of the CUSTOMER table are deleted or the ID column altered, and working with these tables may become more difficult. Many real world databases work around this problem by 'inactivating' rather than physically deleting master table foreign keys, or by complex update programs that modify all references to a foreign key when a change is needed. Foreign keys play an essential role in database design. One important part of database design is making sure that relationships between real-world entities are reflected in the database by references, using foreign keys to refer from one table to another. Another important part of database design is database normalization, in which tables are broken apart and foreign keys make it possible for them to be reconstructed. Multiple rows in the referencing (or child) table may refer to the same row in the referenced (or parent) table. In this case, the relationship between the two tables is called a one to many relationship between the referencing table and the referenced table. In addition, the child and parent table may, in fact, be the same table, i.e. the foreign key refers back to the same table. Such a foreign key is known in SQL:2003 as a self-referencing or recursive foreign key. In database management systems, this is often accomplished by linking a first and second reference to the same table. A table may have multiple foreign keys, and each foreign key can have a different parent table. Each foreign key is enforced independently by the database system. Therefore, cascading relationships between tables can be established using foreign keys. A foreign key is defined as an attribute or set of attributes in a relation whose values match a primary key in another relation. The syntax to add such a constraint to an existing table is defined in SQL:2003 as shown below. Omitting the column list in the REFERENCES clause implies that the foreign key shall reference the primary key of the referenced table. Likewise, foreign keys can be defined as part of the CREATE TABLE SQL statement. If the foreign key is a single column only, the column can be marked as such using the following syntax: Foreign keys can be defined with a stored procedure statement. child_table: the name of the table or view that contains the foreign key to be defined. parent_table: the name of the table or view that has the primary key to which the foreign key applies. The primary key must already be defined. col3 and col4: the name of the columns that make up the foreign key. The foreign key must have at least one column and at most eight columns. == Referential actions == Because the database management system enforces referential constraints, it must ensure data integrity if rows in a referenced table are to be deleted (or updated). If dependent rows in referencing tables still exist, those references have to be considered. SQL:2003 specifies 5 different referential actions that shall take place in such occurrences: CASCADE RESTRICT NO ACTION SET NULL SET DEFAULT === CASCADE === Whenever rows in the parent (referenced) table are deleted (or updated), the respective rows of the child (referencing) table with a matching foreign key column will be deleted (or updated) as well. This is called a cascade delete (or update). === RESTRICT === A value cannot be updated or deleted when a row exists in a referencing or child table that references the value in the referenced table. Similarly, a row cannot be deleted as long as there is a reference to it from a referencing or child table. To understand RESTRICT (and CASCADE) better, it may be helpful to notice the following difference, which might not be immediately clear. The referential action CASCADE modifies the "behavior" of the (child) table itself where the word CASCADE is used. For example, ON DELETE CASCADE effectively says "When the referenced row is deleted from the other table (master table), then delete also from me". However, the referential action RESTRICT modifies the "behavior" of the master table, not the child table, although the word RESTRICT appears in the child table and not in the master table! So, ON DELETE RESTRICT effectively says: "When someone tries to delete the row from the other table (master table), prevent deletion from that other table (and of course, also don't delete from me, but that's not the main point here)." RESTRICT is not supported by Microsoft SQL 2012 and earlier. === NO ACTION === NO ACTION and RESTRICT are very much alike. The main difference between NO ACTION and RESTRICT is that with NO ACTION the referential integrity check is done after trying to alter the table. RESTRICT does the check before trying to execute the UPDATE or DELETE statement. Both referential actions act the same if the referential integrity check fails: the UPDATE or DELETE statement will result in an error. In other words, when an UPDATE or DELETE statement is executed on the referenced table using the referential action NO ACTION, the DBMS verifies at the end of the statement execution that none of the referential relationships are violated. This is different from RESTRICT, which assumes at the outset that the operation will violate the constraint. Using NO ACTION, the triggers or the semantics of the statement itself may yield an end state in which no foreign key relationships are violated by the time the constraint is finally checked, thus allowing the statement to complete successfully. === SET NULL, SET DEFAULT === In general, the action taken by the DBMS for SET NULL or SET DEFAULT is the same for both ON DELETE or ON UPDATE: the value of the affected referencing attributes is changed to NULL for SET NULL, and to the specified default value for SET DEFAULT. === Triggers === Referential actions are generally implemented as implied triggers (i.e. triggers with system-generated names, often hidden.) As such, they are subject to the same limitations as user-defined triggers, and their order of execution relative to other triggers may need to be considered; in some cases it may become necessary to replace the referential action with its equivalent user-defined trigger to ensure proper execution order, or to work around mutating-table limitations. Another important limitation appears with transaction isolation: your changes to a row may not be able to fully cascade because the row is ref

    Read more →
  • Computer Graphics International

    Computer Graphics International

    Computer Graphics International (CGI) is one of the oldest annual international conferences on computer graphics. It is organized by the Computer Graphics Society (CGS). Researchers across the whole world are invited to share their experiences and novel achievements in various fields - like computer graphics and human-computer interaction. Former conferences have been held recently in Hong Kong (China), Geneva (Switzerland), Shanghai (China), Geneva (virtually), Calgary (Canada), Bintan (Indonesia) and Yokohama (Japan). == Awards == Starting in the year of 2013, CGI has given yearly a Best Paper Award and a Career Achievement Award. == Venues ==

    Read more →
  • Channel (digital image)

    Channel (digital image)

    Color digital images are made of pixels, and pixels are made of combinations of primary colors represented by a series of code. A channel in this context is the grayscale image of the same size as a color image, made of just one of these primary colors. For instance, an image from a standard digital camera will have a red, green and blue channel. A grayscale image has just one channel. In geographic information systems, channels are often referred to as raster bands. Another closely related concept is feature maps, which are used in convolutional neural networks. == Overview == In the digital realm, there can be any number of conventional primary colors making up an image; a channel in this case is extended to be the grayscale image based on any such conventional primary color. By extension, a channel is any grayscale image of the same dimension as and associated with the original image. Channel is a conventional term used to refer to a certain component of an image. In reality, any image format can use any algorithm internally to store images. For instance, GIF images actually refer to the color in each pixel by an index number, which refers to a table where three color components are stored. However, regardless of how a specific format stores the images, discrete color channels can always be determined, as long as a final color image can be rendered. The concept of channels is extended beyond the visible spectrum in multispectral and hyperspectral imaging. In that context, each channel corresponds to a range of wavelengths and contains spectroscopic information. The channels can have multiple widths and ranges. Three main channel types (or color models) exist, and have respective strengths and weaknesses. === RGB images === An RGB image has three channels: red, green, and blue. RGB channels roughly follow the color receptors in the human eye, and are used in computer displays and image scanners. If the RGB image is 24-bit (the industry standard as of 2005), each channel has 8 bits, for red, green, and blue—in other words, the image is composed of three images (one for each channel), where each image can store discrete pixels with conventional brightness intensities between 0 and 255. If the RGB image is 48-bit (very high color-depth), each channel has 16-bit per pixel color, that is 16-bit red, green, and blue for each per pixel. ==== RGB color sample ==== Notice how the grey trees have similar brightness in all channels, the red dress is much brighter in the red channel than in the other two, and how the green part of the picture is shown much brighter in the green channel. === YUV === YUV images are an affine transformation of the RGB colorspace, originated in broadcasting. The Y channel correlates approximately with perceived intensity, whilst the U and V channels provide colour information. === CMYK === A CMYK image has four channels: cyan, magenta, yellow, and key (black). CMYK is the standard for print, where subtractive coloring is used. A 32-bit CMYK image (the industry standard as of 2005) is made of four 8-bit channels, one for cyan, one for magenta, one for yellow, and one for key color (typically is black). 64-bit storage for CMYK images (16-bit per channel) is not common, since CMYK is usually device-dependent, whereas RGB is the generic standard for device-independent storage. ==== CMYK color sample ==== === HSV === HSV, or hue saturation value, stores color information in three channels, just like RGB, but one channel is devoted to brightness (value), and the other two convey colour information. The value channel is similar to (but not exactly the same as) the CMYK black channel, or its negative. HSV is especially useful in lossy video compression, where loss of color information is less noticeable to the human eye. == Alpha channel == The alpha channel stores transparency information—the higher the value, the more opaque that pixel is. No camera or scanner measures transparency, although physical objects certainly can possess transparency, but the alpha channel is extremely useful for compositing digital images together. Bluescreen technology involves filming actors in front of a primary color background, then setting that color to transparent, and compositing it with a background. The GIF and PNG image formats use alpha channels on the World Wide Web to merge images on web pages so that they appear to have an arbitrary shape even on a non-uniform background. == Other channels == In 3D computer graphics, multiple channels are used for additional control over material rendering; e.g., controlling specularity and so on. == Bit depth == In digitizing images, the color channels are converted to numbers. Since images contain thousands of pixels, each with multiple channels, channels are usually encoded in as few bits as possible. Typical values are 8 bits per channel or 16 bits per channel. Indexed color effectively gets rid of channels altogether to get, for instance, 3 channels into 8 bits (GIF) or 16 bits. == Optimized channel sizes == Since the brain does not necessarily perceive distinctions in each channel to the same degree as in other channels, it is possible that differing the number of bits allocated to each channel will result in more optimal storage; in particular, for RGB images, compressing the blue channel the most and the red channel the least may be better than giving equal space to each. Among other techniques, lossy video compression uses chroma subsampling to reduce the bit depth in color channels (hue and saturation), while keeping all brightness information (value in HSV). 16-bit HiColor stores red and blue in 5 bits, and green in 6 bits.

    Read more →
  • Data item

    Data item

    A data item describes an atomic state of a particular object concerning a specific property at a certain time point. A collection of data items for the same object at the same time forms an object instance (or table row). Any type of complex information can be broken down to elementary data items (atomic state). Data items are identified by object (o), property (p) and time (t), while the value (v) is a function of o, p and t: v = F(o,p,t). Values typically are represented by symbols like numbers, texts, images, sounds or videos. Values are not necessarily atomic. A value's complexity depends on the complexity of the property and time component. When looking at databases or XML files, the object is usually identified by an object name or other type of object identifier, which is part of the "data". Properties are defined as columns (table row), properties (object instance) or tags (XML). Often, time is not explicitly expressed and is an attribute applying to the complete data set. Other data collections provide time on the instance level (time series), column level, or even attribute/property level.

    Read more →
  • Patent visualisation

    Patent visualisation

    Patent visualisation is an application of information visualisation. The number of patents has been increasing, encouraging companies to consider intellectual property as a part of their strategy. Patent visualisation, like patent mapping, is used to quickly view a patent portfolio. Software dedicated to patent visualisation began to appear in 2000, for example Aureka from Aurigin (now owned by Thomson Reuters). Many patent and portfolio analytics platforms, such as Questel, Patent Forecast, PatSnap, Patentcloud, Relecura, and Patent iNSIGHT Pro, offer options to visualise specific data within patent documents by creating topic maps, priority maps, IP Landscape reports, etc. Software converts patents into infographics or maps, to allow the analyst to "get insight into the data" and draw conclusions. Also called patinformatics, it is the "science of analysing patent information to discover relationships and trends that would be difficult to see when working with patent documents on a one-and-one basis". Patents contain structured data (like publication numbers) and unstructured text (like title, abstract, claims and visual info). Structured data are processed by data-mining and unstructured data are processed with text-mining. == Data mining == The main step in processing structured information is data-mining, which emerged in the late 1980s. Data mining involves statistics, artificial intelligence, and machine learning. Patent data mining extracts information from the structured data of the patent document. These structured data are bibliographic fields such as location, date or status. === Structured fields === === Advantages === Data mining allows study of filing patterns of competitors and locates main patent filers within a specific area of technology. This approach can be helpful to monitor competitors' environments, moves and innovation trends and gives a macro view of a technology status. == Text-mining == === Principle === Text mining is used to search through unstructured text documents. This technique is widely used on the Internet, it has had success in bioinformatics and now in the intellectual property environment. Text mining is based on a statistical analysis of word recurrence in a corpus. An algorithm extracts words and expressions from title, summary and claims and gathers them by declension. "And" and "if" are labeled as non-information bearing words and are stored in the stopword list. Stoplists can be specialised in order to create an accurate analysis. Next, the algorithm ranks the words by weight, according to their frequency in the patent's corpus and the document frequency containing this word. The score for each word is calculated using a formula such as: W e i g h t = T e r m F r e q u e n c y D o c u m e n t F r e q u e n c y = F r e q u e n c y o f t h e w o r d o r e x p r e s s i o n i n t h e T e x t S e a N u m b e r o f d o c u m e n t s c o n t a i n i n g t h e e x p r e s s i o n o r w o r d {\displaystyle Weight={\frac {Term\ Frequency}{Document\ Frequency}}={\frac {Frequency\ of\ the\ word\ or\ expression\ in\ the\ Text\ Sea}{Number\ of\ documents\ containing\ the\ expression\ or\ word}}} A frequently used word in several documents has less weight than a word used frequently in a few patents. Words under a minimum weight are eliminated, leaving a list of pertinent words or descriptors. Each patent is associated to the descriptors found in the selected document. Further, in the process of clusterisation, these descriptors are used as subsets, in which the patent are regrouped or as tags to place the patents in predetermined categories, for example keywords from International Patent Classifications. Four text parts can be processed with text-mining : Title Abstract Claim Patent Full-Text Software offer different combinations but title, abstract and claim are generally the most used, providing a good balance between interferences and relevancy. === Advantages === Text-mining can be used to narrow a search or quickly evaluate a patent corpus. For instance, if a query produces irrelevant documents, a multi-level clustering hierarchy identifies them in order to delete them and refine the search. Text-mining can also be used to create internal taxonomies specific to a corpus for possible mapping. == Visualisations == Allying patent analysis and informatic tools offers an overview of the environment through value-added visualisations. As patents contain structured and unstructured information, visualisations fall in two categories. Structured data can be rendered with data mining in macrothematic maps and statistical analysis. Unstructured information can be shown in like clouds, cluster maps and 2D keyword maps. === Data mining visualisation === === Text mining visualisation === === Visualisation for both data-mining and text-mining === Mapping visualisations can be used for both text-mining and data-mining results. == Uses == What patent visualisation can highlight: Competitors Partners New innovations Technologic environment description Networks Field application: R&D strategy management Competitive intelligence Licensing Strategy

    Read more →
  • NHS COVID-19

    NHS COVID-19

    NHS COVID-19 was a voluntary contact tracing app for monitoring the spread of the COVID-19 pandemic in England and Wales, in use from 24 September 2020 until 27 April 2023. It was available for Android and iOS smartphones, and could be used by anyone aged 16 or over. Two versions of the app were created. The first was commissioned by NHSX and developed by the Pivotal division of American software company VMware. A pilot deployment began in May 2020, but on 18 June development of the app was abandoned in favour of a second design using the Apple/Google Exposure Notification system. Scotland and Northern Ireland had separate contact tracing apps. A 2023 study estimated that in its first year of use, the app's contact tracing function prevented an estimated 1 million cases, and 9,600 deaths. == Description == The app allowed users to: See the alert level of their local authority area (in Wales) or information about restrictions (in England); to enable this, the user must enter the first half of their postcode "Check in" at places displaying an NHS QR code poster (no longer required by legislation after 26 January 2022, removed from the app the next month) Be notified when they have been in close contact with someone who has tested positive for the virus Be notified when local health protection teams determine that people with the virus had attended a business or other venue around the same time as the user Check their symptoms, and book a coronavirus test if necessary If asked to self-isolate, receive information and a daily "countdown". At first, "close contact" was defined as being within 2 metres for 15 minutes, or within 4 metres for a longer time. These time durations were reduced from 29 October 2020, to as little as three minutes when the other person is at their most infectious, i.e. soon after they begin showing symptoms. === Implementation === The Android app was coded in Kotlin, and the iOS app in Swift. The backend used Java and is deployed to Amazon Web Services using Terraform. The code of the app and back-end is open-source and available on GitHub. == Context == The app was part of the UK's test and trace programme which was chaired by Dido Harding; from 12 May 2020 Tom Riordan, chief executive of Leeds City Council, led the tracing effort. == First phase and cancellation == === Description === In March 2020, NHSX commissioned a contact tracing app to monitor the spread in the United Kingdom of the coronavirus disease 2019 (COVID-19) in the 2020 pandemic, developed by the Pivotal division of American software company VMware. The app used a centralised approach, in contrast to the Google / Apple contact tracing project. NHSX consulted ethicists and GCHQ's National Cyber Security Centre (NCSC) about the privacy aspects. The app recorded the make and model of the phone and asked the user for their postcode area. It generated a unique installation identification number and also a daily identification number. It then used Bluetooth Low Energy (BLE) to record the daily identification number of other users nearby. If a user was unwell, they could tell the app about symptoms which are characteristic of COVID-19, such as a fever and cough. These details were then passed to a central NHS server. This would assess the information and notify other users that have been in contact, giving them appropriate advice such as physical distancing. The NHS would also arrange for a swab test of the unwell user and the outcome would determine further notifications to contacts: if the test confirmed infection with COVID-19, the contacts would be asked to isolate. By June 2020, £11.8 million had been spent on the app; in 2020–21, £35 million was spent on the app. === Deployment === The first public trial of the app began on the Isle of Wight on 5 May 2020 and by 11 May it had been downloaded 55,000 times. When the first national contact tracing schemes were launched – Test, Trace, Protect in Wales on 13 May, then on 28 May NHS Test and Trace in England, and Test and Protect in Scotland – the app was not ready to be included. Replying to a question at the government's daily briefing on 8 June, Hancock was unable to give a date for rollout of the app in England, saying it would be brought in "when it's right to do so". On 17 June, Lord Bethell, junior minister for Innovation at the Department of Health and Social Care, said "we're seeking to get something going before the winter ... it isn't a priority for us at the moment". On 18 June, Health Secretary Matt Hancock announced development would switch to the Apple/Google system after admitting that Apple's restrictions on usage of Bluetooth prevented the app from working effectively. At the same press briefing Dido Harding, leader of the UK's test and trace programme, said "What we've done in really rigorously testing both our own Covid-19 app and the Google-Apple version is demonstrate that none of them are working sufficiently well enough to be actually reliable to determine whether any of us should self-isolate for two weeks [and] that's true across the world". === Concerns === The first, ultimately rejected, version of the app was subject to privacy concerns, the government backtracking on initial statements that the data collected from the app would not be shared outside the NHS. Matthew Gould, CEO of NHSX, the government department responsible for the app, said the data would be accessible to other organisations, but did not disclose which. Data collected would not necessarily be anonymised and would be held in a centralised repository. Over 150 of the UK's security and privacy experts warned the app's data could be used by 'a bad actor (state, private sector, or hacker)' to spy on citizens. Fears were discussed by the House of Commons' Human Rights Select Committee about plans for the app to record user location data. Parliament's Joint Committee on Human Rights said this version of the app should not be released without proper privacy protections. The second version of the app, released nationwide, addressed these concerns by employing a decentralised framework, the Apple/Google Exposure Notification system. Under this system, users remain pseudonymous: a person diagnosed with COVID-19 does not know which people are informed about an encounter, and contacted persons do not receive any information about the person diagnosed with COVID-19. The functionality of the app was also questioned in late April and early May 2020, as the software's use of Bluetooth required the app to be constantly running, meaning users could not use other apps or lock their device if the app was to function properly. The developers of the app were said to have found a way of working around this restriction. === Related contracts === Faculty – a company linked to Cambridge Analytica – provided research and modelling to NHSX in support of the response to the pandemic. Palantir, also linked to Cambridge Analytica, provided their data management platform. These contracts began in February and March respectively. == Second phase == As outlined on cancellation of the first app on 18 June 2020, the Department of Health and Social Care published on 30 July a brief description of the "next phase" app. Users would be able to scan a QR code at venues they visit, and later be notified if they had visited a place which was the source of a number of infections; the app would also assist with identifying symptoms and ordering a test. By using the Exposure Notification system from Apple and Google, personal data would be decentralised. Zuhlke Engineering Ltd, the UK branch of Swiss-based Zühlke Group, used 70 staff to complete the development of the app in 12 weeks. Zuhlke Engineering was awarded "Development Team of the Year" title at UK IT Industry awards in November 2021 for development of NHS COVID-19 application. === Timeline === Testing of the app by NHS volunteer responders, and selected residents of the Isle of Wight and the London Borough of Newham, began around 13 August. The app was made available to the public (aged 16 or over) in England and Wales on 24 September. An updated app released on 29 October, in part from collaboration with the Alan Turing Institute, improved the accuracy of measurements of the distance between the user's phone and other phones. At the same time, the duration threshold for determining exposure was reduced; this was expected to lead to an increase in the number of users told to self-isolate. An update to the app in April 2021, timed to coincide with easing of restrictions on hospitality businesses, was blocked by Apple and Google. It was intended that users who tested positive would be asked to share their history of visited venues, to assist in warning others, but this would have contravened assurances by Apple and Google that location data from devices would not be shared. === Statistics and effectiveness === The app was downloaded six million times on the first day it was generally availa

    Read more →
  • Cybersecurity in space

    Cybersecurity in space

    Cybersecurity in space involves the defense of all space assets (e.g. navigation systems, satellites, ground antennas, networks, etc.). The security of space can be affected by attacks such as disruption, corruption as well as the destruction of depended-upon assets/collected data. Government (e.g. militaries) and non-government sectors (e.g. financial industries) have started to become more reliant on numerous space-based services. Due to the criticality of these services, space security experts have identified these assets as high-value targets (HVT) that can cause detrimental consequences to all of Earth. == Scope and definitions == Space assets are broken down by three sub-sectors: the space component, the ground component, and the individual user component. The architecture of space assets is extremely complex and allows for a frequent attack vector utilized, the disruption by radio frequency (RF) cyber-attacks. In 2020, a memorandum was published by President Donald Trump, Space Policy Directive‑5 (SPD‑5). It established principles to ensure the safeguarding of all space assets. In 2023, the National Institute of Standards and Technology’s (NIST) published IR 8270, Introduction to Cybersecurity for Commercial Satellite Operations. This report established a baseline risk-management framework (RMF) to be implemented into space operations. == History == During the Cold War in the 1950s-1960s, the United States and Russia entered what was called the “Space Race”. By 1957, the Soviet Union successfully launched the first satellite into space named Sputnik. By 1961, the first key milestone was accomplished when the Soviet Union’s Yuri Gagarin became the first human to orbit Earth. This was later followed by the first American, Alan Shepard, to be launched into space; this was followed by John Glenn becoming the first American to orbit Earth in 1962. In 1969, a pinnacle milestone was reached when Apollo 11 launched into space and Neil Armstrong became the first man to walk on the moon. As space operations furthered, Commercial off-the-shelf products became increasingly popular but resulted in a rapid increase to the cyber-attack surface. Public awareness of space security did not increase until 2022, when the Viasat KA-SAT incident occurred, resulting in the disruption of a large number of modems across Europe. The attack was later accredited to Russia by the U.S. and the U.K. Policy and standards started to rapidly increase by 2020. The establishment of SPD-5 was released in 2020 followed by asset hardening instructions in 2022, and NIST’s IR 8270 in 2023. It was not until 2025 that Europe published their own findings in the Space Threat Landscape 2025 Report. This document led to the EU’s security proposals and standards. == Threats == === Radio-frequency Interference and Global Navigation Satellite Systems (GNSS) Spoofing === Space services are highly dependent on RF links for systems such as GNSS, however, a consequence of this dependency on RF is denial of service and deception. In 2017, the Black Sea maritime event occurred when numerous ships were subject to spoofing. Space services depend on RF links susceptible to jamming (denial) and spoofing (deception), including for GNSS/Positioning, Navigation, and Timing (PNT). Annotated incidents include the 2017 Black Sea maritime spoofing event affecting numerous ships, and extensive aviation GNSS spoofing patterns surveyed in various regions during 2024–2025. === Network intrusion and malware === Cyber threats can intrude and infect assets with malware. They do this by finding misconfiguration vulnerabilities, remote-management interfaces, and/or supply-chain vulnerabilities mainly in ground networks and user terminals. When KA-SAT occurred, it resulted from bulk modem disturbances. Forensic analysts later suggested malicious management controls and wiper malware as the root cause. === Supply-chain and lifecycle risks === The outsource of COTS components, external vendors, and software defined payloads allowed for vulnerabilities to emerge in the System/Product Lifecycle. In response, EU recommended the implementation of lifecycle-wide controls as mitigating factors. === Espionage, disruption, and influence === As Advanced Persistent Threats (APTs), Global Positioning System (GPS) intervention, and information warfare increased, assets like transponders became more frequent targets of attack. == Noteworthy incidents == The Viasat KA‑SAT incident of 2022, where a large number of modems in Europe were disrupted, resulted in the loss of telemetry access to a significant amount of wind turbines in Germany. The mass GNSS deception of the Black Sea in 2017 affected numerous ships when they started to convey fake central locations in Russia. Between 2024 and 2025, there was a mass, repetitive aviation GNSS spoofing that affected the aircraft of various regions. == Standards, guidelines, and best practices == SPD‑5 (U.S.) – This established risk-based engineering, verifying and ensuring positive control, and the implementation of risk mitigation controls. NIST IR 8270 – This created a RMF for COTS satellites. CISA/FBI SATCOM Advisory (AA22‑076) – Provided guidance on hardening techniques such as least-privileged, access control, encryption, etc.). ENISA Space Threat Landscape 2025 – It established the categorization of assets to organize threats, ensuring the observation of system/product lifecycle, and an RMF for COTS satellites. ECSS‑E‑ST‑80C (2024) – This established a standard for securing lifecycles in space, covering all segments (e.g. ground, launch, etc.). == Regulation and governance == As of 2025, there is no international regulations established for space assets, but the U.S., EU, and ESA institutional initiatives have published standards to address security concerns. The U.S. implemented SPD-5 and the Federal Communications Commission (FCC); the FCC addressed orbital debris. While the EU created standards to address technological mandates and support the implementation of NIS2. Lastly, the ESA created a special operations center to safeguard their satellites. International governance is still evolving, but forums have been held by the United Nations Committee on the Peaceful Uses of Outer Space. International conversations under forums such as the UN Committee on the Peaceful Uses of Outer Space (COPUOS) progressively note the cyber–space safety relationship, though formal global norms specific to space cybersecurity continue evolving. == Risk management approaches == Through RMF, mitigation controls have been implemented to reduce the risk of exploitation while increasing the security of space. Controls addressing mitigation include proper configuration, system hardening, zero-trust architectures, encryption, etc. Both the government and industries have placed an emphasis on incident response procedures to identify, contain, and remediate breaches.

    Read more →
  • WIPO GREEN

    WIPO GREEN

    WIPO GREEN is a World Intellectual Property Organization program established in 2013 that supports global efforts to address climate change and food security through sharing of sustainable technology innovations. == WIPO GREEN database == The WIPO GREEN database is the foundation of the platform. The database is a free, solutions-oriented, global innovation catalog that connects needs for solving environmental or climate change problems with sustainable solutions from prototypes to marketable products available for sale, license, collaborations, knowledge transfer, joint ventures, or collaborations. Green technology innovators can promote their products, businesses, organizations, and governments looking for green technologies can explain their needs and seek collaboration with providers. As of July 2022, WIPO GREEN has over 120,000 technologies, needs and experts, more than 2000 users in 110 countries, and has recorded over 1000 connections made between technology providers and seekers. The database utilizes AI-assisted auto-matching, user uploads tracing and alerts, full-text search for solutions based on long need descriptions, and the Patent2Solution search function for finding commercial applications of a patent, which are some of the unique features of the database. Free registration is required for detailed record view and uploading. All technologies uploaded to the WIPO GREEN database remain the property of the rights holder. It is up to the rights holder and the collaborating parties to structure agreements in the manner they feel is most appropriate and effective. WIPO GREEN does not require that technologies or innovations uploaded to the database be patented or in the process of being patented. Therefore, technology providers can upload their technology while related patent applications are pending. Technology providers are encouraged to upload technology solutions on the WIPO GREEN database and connect with other users to explore partnerships, technology transfers, including funding and licensing opportunities. == Acceleration projects == Acceleration projects work with WIPO GREEN partners and local organizations to explore local challenges and green opportunities for particular environmental needs. These projects are organized annually in different countries or regions around and connect providers and seekers of green technologies. For example, the Latin America Acceleration Project explores innovative new technologies in the region and facilitates green technology exchange between providers and seekers in green opportunities in intensified crop rotation, soil re-carbonization, and forest management in Argentina; zero-till or conservation agriculture in Brazil; and wine production in Chile. In October 2021, a project in Indonesia on palm oil mill effluent (POME), a by-product of palm oil production that emits greenhouse gases and reportedly harms flora and fauna in local rivers, identified viable green solutions to turn the high organic content of POME wastewater into biogas and other environmentally friendly uses. Former projects took place in Cambodia, Indonesia, and the Philippines around wastewater treatment, agriculture, and water technologies. == The Green Technology Book == In November 2022 at UNFCCC COP27, WIPO introduced its new Flagship publication the Green Technology Book. This digital-first publication aims to put innovation, technology and intellectual property at the forefront in the fight against climate change. The inaugural edition of this annual publication focused on available solutions for climate-change adaptation to reduce vulnerability as well as to increase resilience to the impacts of climate change. The book was created in cooperation with the Climate Technology Center and Network (CTCN) and the Egyptian Academy of Scientific Research and Technology (ASTR). It features 200 adaptation technologies, which are also available in the WIPO GREEN database of innovative technologies and needs. == Partners Network == WIPO GREEN partners are public or private institutions that wish to collaborate to advance WIPO GREEN’s mission. The network is aimed at helping the implementation and diffusion of green technology innovations around the world. Partners include government institutions, intergovernmental organizations, academia, and businesses – from small and medium-sized enterprises to Fortune 500 companies. As of 2022, WIPO GREEN has a network of over 146 partner organizations involved in green technology.

    Read more →
  • Digistar

    Digistar

    Digistar is the first computer graphics-based planetarium projection and content system. It was designed by Evans & Sutherland and released in 1983. The technology originally focused on accurate and high quality display of stars, including for the first time showing stars from points of view other than Earth's surface, travelling through the stars, and accurately showing celestial bodies from different times in the past and future. Beginning with the Digistar 3 the system now projects full-dome video. == Projector == Unlike modern full-dome systems, which use LCD, DLP, SXRD, or laser projection technology, the Digistar projection system was designed for projecting bright pinpoints of light representing stars. This was accomplished using a calligraphic display, a form of vector graphics, rather than raster graphics. The heart of the Digistar projector is a large cathode-ray tube (CRT). A phosphor plate is mounted atop the tube, and light is then dispersed by a large lens with a 160 degree field of view to cover the planetarium dome. The original lens bore the inscription: "August 1979 mfg. by Lincoln Optical Corp., L.A., CA for Evans and Sutherland Computer Corp., SLC, UT, Digital planetarium CRT projection lens, 43mm, f2.8, 160 degree field of view". The coordinates of the stars and wire-frame models to be displayed by the projector were stored in computer RAM in a display list. The display would read each set of coordinates in turn and drive the CRT's electron beam directly to those coordinates. If the electron beam was enabled while being moved a line would be painted on the phosphor plate. Otherwise, the electron beam would be enabled once at its destination and a star would be painted. Once all coordinates in the display list had been processed, the display would repeat from the top of the display list. Thus, the shorter the display list the more frequently the electron beam would refresh the charge on a given point on the phosphor plate, making the projection of the points brighter. In this way, the stars projected by Digistar were substantially brighter than could be achieved using a raster display, which has to touch every point on the phosphor plate before repeating. Likewise, the calligraphic technology allowed Digistar to have a darker black-level than full-dome projectors, since the portions of the phosphor plate representing dark sky were never hit by the electron beam. As it is only one tube, with no pixelated color filter screen, the Digistar projector is monochromatic. The Digistar projects a bright, phosphorescent green, though many (including both visitors and planetarians) report they cannot distinguish between this green and white. Additionally, unlike a raster display, the calligraphic display is not discretized into pixels, so the displayed stars were a more realistic single spot of light, without the blocky or ropy artifacts that are hard to avoid with raster graphics. Due to the use of vector graphics, as opposed to raster imaging, the Digistar does not have the resolution issues that many full-dome systems have. Thanks to this, and the brightness of the CRT, only one projector is needed to project on the entire dome, whereas most full-dome systems require up to six raster projectors, depending on dome size. The projector in the original Digistar was housed in a square pyramid-shaped sheathing. When powered on, the four sides at the tip of the pyramid would recede into the housing, exposing the lens and appearing as a cut-off pyramid. As Digistar II was being developed, many planetaria were sold Digistar LEA projectors. The LEA, called Digistar 1.5 by many users, was effectively a prototype of the D2 projector, compatible with Digistar and upgradable to Digistar II. There are no significant differences in performance between the LEA and the true D2. == History == Digistar was the brainchild of Stephen McAllister and Brent Watson, both of whom were long-time amateur astronomers and computer graphics engineers. In 1977, E&S had been consulting with Johnson Space Center regarding training simulators for astronauts. McAllister had been writing proof-of-concept software for this consultation and in summer 1977 entered the data for 400 bright stars and wrote the software to display them. Steve and Brent both originally saw the system's purpose as celestial navigation training. Brent, who had until recently worked at Hansen planetarium, asked his planetarium coworkers what they thought of a potential digital planetarium system, and then Steve and Brent both targeted the system toward planetaria. The primary goal of the planetarium system was to use computer graphics to overcome the limitation of traditional star ball technology that only allowed display of star fields from the point of view of Earth's surface. By using computer graphics the stars could be displayed from viewpoints in space, including simulating the appearance of space flight. Likewise, planets and moons within the Solar System could be displayed accurately for any time in history, from any point of view. The system used the location of real stars from the Yale Bright Star Catalogue, as well as random stars. A laboratory prototype of Digistar was used to generate the star fields and tactical displays in the 1982 science fiction film Star Trek II: The Wrath of Khan. Filming was done directly from the Digistar display in the lab. ILM projected the effort would take two weeks, but in fact it took from late November 1981 until mid-February 1982. The last shot recorded was what became the first entirely computer generated feature film sequence. It was the opening scene of the film, a rotating forward translation through a star field that lasted 3.5 minutes. It was recorded in one take, at a rate of one frame every 3.5 seconds, taking four hours for the shoot. The Digistar team members are credited in the film. After prototyping in labs at Evans and Sutherland the team repeatedly used Salt Lake City's Hansen planetarium to beta test the system at the planetarium at night. The Digistar team performed one week of shows at the planetarium as a fund raiser to benefit the planetarium. The company also later gave the planetarium an improved prototype Digistar to replace "Jake", the planetarium's aging Spitz planetarium projector. The first customer installation was to the newly constructed Universe Planetarium at the Science Museum of Virginia in 1983, the largest planetarium dome in the world at the time, for $595,000. By September 1986 there were four installed Digistars. Even at this point the long-term success of the product was very much in doubt, but as of 2019 Digistar has an installed base of over 550 planetaria. === Versions === Digistar (1983) Digistar II (1995) Digistar 3 (2002) Digistar 4 (2010?) Digistar 5 (2012) Digistar 6 (2016) Digistar 7 (2021) == Hardware == Digistar was driven by a VAX-11/780 minicomputer, with custom graphics hardware related to the E&S Picture System 2. Later versions of Digistar 1 used a DEC MicroVAX 2, driving a custom version of a PS/300. The original Digistar and Digistar 2 had a physical control panel that was used for running the star shows. This control panel was approximately 3' x 4' and contained a keyboard, a 6 DOF joystick, and a large array of back-lit buttons. One button that was used for moving the viewpoint forward in space was labeled "Boldly Go". Later iterations of Digistar replaced the physical control panel with a common graphical user interface. Digistar 3 was the first Digistar system to offer full-dome video in 2002, using six projectors. Digistar 4 was able to cover the dome using only two projectors. == System limitations == Though technologically advanced in its day, and the closest system to true full-dome video at the time of its release, the original Digistar and Digistar 2 are limited to only projecting dots and lines—meaning only wireframe models can be projected. To compensate for this, the projector is capable of defocusing specific models, blurring lines and dots together. An example of this is in the Digistar 2's built-in Milky Way model. The model is a circle of parallel lines that, when defocused, appear as the continuous band of the Milky Way across the sky. On more complex models, especially three-dimensional ones, brightness and details may be lost in this process, so it is not useful in all situations. The Digistar and Digistar 2 also suffer focus limitations. Because they use a single lens to cover the entire dome, it is difficult to gain perfect focus across the dome. Coupled with this, stars greater than a certain brightness are "multihit" points, meaning the projector draws two dots at the given position to accommodate the brightness of the star. Errors in the projector can lead the second dot to be slightly out-of-place with the first one. These two issues together, along with other issues that can occur within the projector's focus system, give the stars a blobby look. Some p

    Read more →
  • View synthesis

    View synthesis

    In computer graphics, view synthesis, or novel view synthesis, is a task which consists of generating images of a specific subject or scene from a specific point of view, when the only available information is pictures taken from different points of view. This task was only recently (late 2010s – early 2020s) tackled with significant success, mostly as a result of advances in machine learning. Notable successful methods are Neural radiance fields and 3D Gaussian Splatting. Applications of view synthesis are numerous, one of them being Free view point television. The technique has also been applied to real-estate marketing, where novel views of a listing's interior are generated from a limited set of photographs for use in virtual home staging.

    Read more →