AI Assistant Image

AI Assistant Image — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Open Threat Exchange

  Open Threat Exchange (OTX) is a crowd-sourced computer-security platform. It has more than 180,000 participants in 140 countries who share more than 19 million potential threats daily. It is free to use. Founded in 2012, OTX was created and is run by AlienVault (now AT&T Cybersecurity), a developer of commercial and open source solutions to manage cyber attacks. The collaborative threat exchange was created partly as a counterweight to criminal hackers successfully working together and sharing information about viruses, malware and other cyber attacks. == Components == OTX is cloud-hosted. Information sharing covers a wide range of security-related issues, including viruses, malware, intrusion detection and firewalls. Its automated tools cleanse, aggregate, validate and publish data shared by participants. The OTX platform validates the data, then strips the information identifying the participating contributor. In 2015, OTX 2.0 added a social network, enabling members to share, discuss and research security threats, including via a real-time threat feed. Users can share the IP addresses or websites from where attacks originated or look up specific threats to see if anyone has already left such information. Users can subscribe to a “Pulse,” an analysis of a specific threat, including data on IoC, impact, and the targeted software. Pulses can be exported as STIX, JSON, OpenloC, MAEC and CSV, and can be used to update local security products automatically. Users can up-vote and comment on specific pulses to assist others in identifying the most important threats. OTX combines social contributions with automated machine-to-machine tools that integrate with major security products such as firewalls and perimeter security hardware. The platform can read security reports in .pdf, .csv, .json and other open formats. Relevant information is extracted automatically, assisting IT professionals in analyzing data more readily. Specific OTX components include a dashboard with details about the top malicious IPs around the world and to check the status of specific IPs; notifications should an organization's IP or domain be found in a hacker forum, blacklist or be listed by OTX; and a feature to review log files to determine if there has been communication with known malicious IPs. In 2016, AlienVault released a new version of OTX, allowing participants to create private communities and discussion groups to share information on threats only within the group. The feature is intended to facilitate more in-depth discussions on specific threats, particular industries, and different regions worldwide. Threat data from groups can also be distributed to subscribers of managed service providers using OTX." == Technology == OTX is a large data platform that integrates natural language processing and machine learning. It uses these features to facilitate the collection and correlation of data from many sources, including third-party threat feeds, websites, external APIs and local agents. == Partners == In 2015, AlienVault partnered with Intel to coordinate real-time threat information on OTX. A similar deal with Hewlett Packard was announced the same year. == Competitors == Both Facebook and IBM have threat exchange platforms. The Facebook ThreatExchange is in beta and requires an application or invitation to join. IBM launched IBM X-Force Exchange in April 2015.

  Read more →
• 

  Geometric primitive

  In vector computer graphics, CAD systems, and geographic information systems, a geometric primitive (or prim) is the simplest (i.e. 'atomic' or irreducible) geometric shape that the system can handle (draw, store). Sometimes the subroutines that draw the corresponding objects are called "geometric primitives" as well. The most "primitive" primitives are point and straight line segments, which were all that early vector graphics systems had. In constructive solid geometry, primitives are simple geometric shapes such as a cube, cylinder, sphere, cone, pyramid, torus. Modern 2D computer graphics systems may operate with primitives which are curves (segments of straight lines, circles and more complicated curves), as well as shapes (boxes, arbitrary polygons, circles). A common set of two-dimensional primitives includes lines, points, and polygons, although some people prefer to consider triangles primitives, because every polygon can be constructed from triangles (polygon triangulation). All other graphic elements are built up from these primitives. In three dimensions, triangles or polygons positioned in three-dimensional space can be used as primitives to model more complex 3D forms. In some cases, curves (such as Bézier curves, circles, etc.) may be considered primitives; in other cases, curves are complex forms created from many straight, primitive shapes. == Common primitives == The set of geometric primitives is based on the dimension of the region being represented: Point (0-dimensional), a single location with no height, width, or depth. Line or curve (1-dimensional), having length but no width, although a linear feature may curve through a higher-dimensional space. Planar surface or curved surface (2-dimensional), having length and width. Volumetric region or solid (3-dimensional), having length, width, and depth. In GIS, the terrain surface is often spoken of colloquially as "2 1/2 dimensional," because only the upper surface needs to be represented. Thus, elevation can be conceptualized as a scalar field property or function of two-dimensional space, affording it a number of data modeling efficiencies over true 3-dimensional objects. A shape of any of these dimensions greater than zero consists of an infinite number of distinct points. Because digital systems are finite, only a sample set of the points in a shape can be stored. Thus, vector data structures typically represent geometric primitives using a strategic sample, organized in structures that facilitate the software interpolating the remainder of the shape at the time of analysis or display, using the algorithms of Computational geometry. A Point is a single coordinate in a Cartesian coordinate system. Some data models allow for Multipoint features consisting of several disconnected points. A Polygonal chain or Polyline is an ordered list of points (termed vertices in this context). The software is expected to interpolate the intervening shape of the line between adjacent points in the list as a parametric curve, most commonly a straight line, but other types of curves are frequently available, including circular arcs, cubic splines, and Bézier curves. Some of these curves require additional points to be defined that are not on the line itself, but are used for parametric control. A Polygon is a polyline that closes at its endpoints, representing the boundary of a two-dimensional region. The software is expected to use this boundary to partition 2-dimensional space into an interior and exterior. Some data models allow for a single feature to consist of multiple polylines, which could collectively connect to form a single closed boundary, could represent a set of disjoint regions (e.g., the state of Hawaii), or could represent a region with holes (e.g., a lake with an island). A Parametric shape is a standardized two-dimensional or three-dimensional shape defined by a minimal set of parameters, such as an ellipse defined by two points at its foci, or three points at its center, vertex, and co-vertex. A Polyhedron or Polygon mesh is a set of polygon faces in three-dimensional space that are connected at their edges to completely enclose a volumetric region. In some applications, closure may not be required or may be implied, such as modeling terrain. The software is expected to use this surface to partition 3-dimensional space into an interior and exterior. A triangle mesh is a subtype of polyhedron in which all faces must be triangles, the only polygon that will always be planar, including the Triangulated irregular network (TIN) commonly used in GIS. A parametric mesh represents a three-dimensional surface by a connected set of parametric functions, similar to a spline or Bézier curve in two dimensions. The most common structure is the Non-uniform rational B-spline (NURBS), supported by most CAD and animation software. == Application in GIS == A wide variety of vector data structures and formats have been developed during the history of Geographic information systems, but they share a fundamental basis of storing a core set of geometric primitives to represent the location and extent of geographic phenomena. Locations of points are almost always measured within a standard Earth-based coordinate system, whether the spherical Geographic coordinate system (latitude/longitude), or a planar coordinate system, such as the Universal Transverse Mercator. They also share the need to store a set of attributes of each geographic feature alongside its shape; traditionally, this has been accomplished using the data models, data formats, and even software of relational databases. Early vector formats, such as POLYVRT, the ARC/INFO Coverage, and the Esri shapefile support a basic set of geometric primitives: points, polylines, and polygons, only in two dimensional space and the latter two with only straight line interpolation. TIN data structures for representing terrain surfaces as triangle meshes were also added. Since the mid 1990s, new formats have been developed that extend the range of available primitives, generally standardized by the Open Geospatial Consortium's Simple Features specification. Common geometric primitive extensions include: three-dimensional coordinates for points, lines, and polygons; a fourth "dimension" to represent a measured attribute or time; curved segments in lines and polygons; text annotation as a form of geometry; and polygon meshes for three-dimensional objects. Frequently, a representation of the shape of a real-world phenomenon may have a different (usually lower) dimension than the phenomenon being represented. For example, a city (a two-dimensional region) may be represented as a point, or a road (a three-dimensional volume of material) may be represented as a line. This dimensional generalization correlates with tendencies in spatial cognition. For example, asking the distance between two cities presumes a conceptual model of the cities as points, while giving directions involving travel "up," "down," or "along" a road imply a one-dimensional conceptual model. This is frequently done for purposes of data efficiency, visual simplicity, or cognitive efficiency, and is acceptable if the distinction between the representation and the represented is understood, but can cause confusion if information users assume that the digital shape is a perfect representation of reality (i.e., believing that roads really are lines). == In 3D modelling == In CAD software or 3D modelling, the interface may present the user with the ability to create primitives which may be further modified by edits. For example, in the practice of box modelling the user will start with a cuboid, then use extrusion and other operations to create the model. In this use the primitive is just a convenient starting point, rather than the fundamental unit of modelling. A 3D package may also include a list of extended primitives which are more complex shapes that come with the package. For example, a teapot is listed as a primitive in 3D Studio Max. == In graphics hardware == Various graphics accelerators exist with hardware acceleration for rendering specific primitives such as lines or triangles, frequently with texture mapping and shaders. Modern 3D accelerators typically accept sequences of triangles as triangle strips.

  Read more →
• 

  Tessellation (computer graphics)

  In computer graphics, tessellation is the dividing of datasets of polygons (sometimes called vertex sets) presenting objects in a scene into suitable structures for rendering. Especially for real-time rendering, data is tessellated into triangles, for example in OpenGL 4.0 and Direct3D 11. == In graphics rendering == A key advantage of tessellation for realtime graphics is that it allows detail to be dynamically added and subtracted from a 3D polygon mesh and its silhouette edges based on control parameters (often camera distance). In previously leading realtime techniques such as parallax mapping and bump mapping, surface details could be simulated at the pixel level, but silhouette edge detail was fundamentally limited by the quality of the original dataset. In Direct3D 11 pipeline (a part of DirectX 11), the graphics primitive is the patch. The tessellator generates a triangle-based tessellation of the patch according to tessellation parameters such as the TessFactor, which controls the degree of fineness of the mesh. The tessellation, along with shaders such as a Phong shader, allows for producing smoother surfaces than would be generated by the original mesh. By offloading the tessellation process onto the GPU hardware, smoothing can be performed in real time. Tessellation can also be used for implementing subdivision surfaces, level of detail scaling and fine displacement mapping. OpenGL 4.0 uses a similar pipeline, where tessellation into triangles is controlled by the Tessellation Control Shader and a set of four tessellation parameters. == In computer-aided design == In computer-aided design the constructed design is represented by a boundary representation topological model, where analytical 3D surfaces and curves, limited to faces, edges, and vertices, constitute a continuous boundary of a 3D body. Arbitrary 3D bodies are often too complicated to analyze directly. So they are approximated (tessellated) with a mesh of small, easy-to-analyze pieces of 3D volume—usually either irregular tetrahedra, or irregular hexahedra. The mesh is used for finite element analysis. The mesh of a surface is usually generated per individual faces and edges (approximated to polylines) so that original limit vertices are included into mesh. To ensure that approximation of the original surface suits the needs of further processing, three basic parameters are usually defined for the surface mesh generator: The maximum allowed distance between the planar approximation polygon and the surface (known as "sag"). This parameter ensures that mesh is similar enough to the original analytical surface (or the polyline is similar to the original curve). The maximum allowed size of the approximation polygon (for triangulations it can be maximum allowed length of triangle sides). This parameter ensures enough detail for further analysis. The maximum allowed angle between two adjacent approximation polygons (on the same face). This parameter ensures that even very small humps or hollows that can have significant effect to analysis will not disappear in mesh. An algorithm generating a mesh is typically controlled by the above three and other parameters. Some types of computer analysis of a constructed design require an adaptive mesh refinement, which is a mesh made finer (using stronger parameters) in regions where the analysis needs more detail.

  Read more →
• 

  Collaboration-oriented architecture

  Collaboration Oriented Architecture (COA) is a computer system that is designed to collaborate, or use services, from systems that are outside of the operators control. Collaboration Oriented Architecture will often use Service Oriented Architecture to deliver the technical framework. Collaboration Oriented Architecture is the ability to collaborate between systems that are based on the Jericho Forum principles or "Commandments". Bill Gates and Craig Mundie (Microsoft) clearly articulated the need for people to work outside of their organizations in a secure and collaborative manner in their opening keynote to the RSA Security Conference in February 2007. Successful implementation of a Collaboration Oriented Architecture implies the ability to successfully inter-work securely over the Internet and will typically mean the resolution of the problems that come with de-perimeterisation. == Etymology == The term Collaboration Oriented Architectures was defined and developed in a meeting of the Jericho Forum at a meeting held at HSBC on 6 July 2007. == Definition == The key elements that qualify a security architecture as a Collaboration Oriented Architecture are as follows; Protocol: Systems use appropriately secure protocols to communicate. Authentication: The protocol is authenticated with user and/or system credentials. Federation: User and/or systems credentials are accepted and validated by systems that are not under your (locus of) control. Network Agnostic: The design does not rely on a secure network, thus it will operate securely from an Intranet to raw-Internet Trust: The collaborating system have the capacity to be able to confirm to a specified degree of confidence that the components in a transaction chain have. Risk: The collaborating systems can make a risk assessment on any transaction based on the communicated levels of required trust, based on the required degree of identity, confidentiality, integrity, availability. == Authentication == Working in a collaborative multi-sourced environment implies the need for authentication, authorization and accountability which must interoperate / exchange outside of your locus / area of control. People/systems must be able to manage permissions of resources and rights of users they don't control There must be capability of trusting an organization, which can authenticate individuals or groups, thus eliminating the need to create separate identities In principle, only one instance of person / system / identity may exist, but privacy necessitates the support for multiple instances, or one instance with multiple facets, often referred to as personas Systems must be able to pass on security credentials /assertions Multiple loci (areas) of control must be supported

  Read more →
• 

  Clipmap

  In computer graphics, clipmapping is a method of clipping a mipmap to a subset of data pertinent to the geometry being displayed. This is useful for loading as little data as possible when memory is limited, such as on a graphics processing unit. The technique is used for LODing in NVIDIA’s implementation of voxel cone tracing. The high-resolution levels of the mipmapped scene representation are clipped to a region near the camera, while lower resolution levels are clipped further away. == MegaTexture == MegaTexture is a clipmap implementation developed by id Software. It was introduced in their id Tech 4 engine and also appeared in id Tech 5 and id Tech 6 before being removed in id Tech 7. MegaTexture is a texture allocation technique that uses a single, extremely large texture rather than repeating multiple smaller textures. It is also featured in Splash Damage's game Enemy Territory: Quake Wars, and was developed by id Software former technical director John Carmack. MegaTexture employs a single large texture space for static terrain. The texture is stored on removable media or a computer's hard drive and streamed as needed, allowing large amounts of detail and variation over a large area with comparatively little RAM usage. Depending on the pixel resolution per square meter, covering a large area could require several gigabytes of memory. However, RAM is also filled by the rest of the game and the underlying operating system, limiting the amount available for texturing. As the player moves around the game, different sections of the MegaTexture are loaded into memory. They are then scaled to the correct size and applied to the 3D models of the terrain. Id has presented a more advanced technique that builds upon the MegaTexture idea and virtualizes both the geometry and the textures to obtain unique geometry down to the equivalent of the texel: the sparse voxel octree (SVO). It works by raycasting the geometry represented by voxels (instead of triangles) stored in an octree. The goal is to stream parts of the octree into video memory, going further down along the tree for nearby objects to give them more details, and to use higher level, larger voxels for farther objects, which give an automatic level of detail (LOD) system for both geometry and textures at the same time. The geometric detail that can be obtained using this method is nearly infinite, which removes the need for faking 3-dimensional details with techniques such as normal mapping. Despite that most voxel rendering tests use very large amounts of memory (up to several GB), Jon Olick of id Software claimed the technology is able to compress such SVO to 1.15 bits per voxel of position data. == Virtual texturing == Unlike clipmaps, which clip each mip level around a viewpoint-dependent clipcenter and therefore work best for terrain, virtual texturing preprocesses texture data into equally sized tiles that can be streamed for arbitrary textured geometry. Rage, powered by the id Tech 5 engine, uses a more advanced technique called virtual texturing. Textures can measure up to 128000×128000 pixels and are also used for in-game models and sprites, etc. and not just the terrain. Wolfenstein: The New Order and the 2016 version of Doom also use these. Carmageddon: Reincarnation also uses virtual texturing, though unlike id's virtual texturing system, which is designed for unique texture-mapping everywhere, their system is designed to use storage space sparingly while still offering good blend of texture variation and resolution.

  Read more →
• 

  Automotive security

  Automotive security refers to the branch of computer security focused on the cyber risks related to the automotive context. The increasingly high number of ECUs in vehicles and, alongside, the implementation of multiple different means of communication from and towards the vehicle in a remote and wireless manner led to the necessity of a branch of cybersecurity dedicated to the threats associated with vehicles. Not to be confused with automotive safety. == Causes == The implementation of multiple ECUs (Electronic Control Units) inside vehicles began in the early '70s thanks to the development of integrated circuits and microprocessors that made it economically feasible to produce the ECUs on a large scale. Since then the number of ECUs has increased to up to 100 per vehicle. These units nowadays control almost everything in the vehicle, from simple tasks such as activating the wipers to more safety-related ones like brake-by-wire or ABS (Anti-lock Braking System). Autonomous driving is also strongly reliant on the implementation of new, complex ECUs such as the ADAS, alongside sensors (lidars and radars) and their control units. Inside the vehicle, the ECUs are connected with each other through cabled or wireless communication networks, such as CAN bus (controller area network), MOST bus (Media Oriented System Transport), FlexRay (Automotive Network Communications Protocol) or RF (radio frequency) as in many implementations of TPMSs (tire-pressure monitoring systems). Many of these ECUs require data received through these networks that arrive from various sensors to operate and use such data to modify the behavior of the vehicle (e.g., the cruise control modifies the vehicle's speed depending on signals arriving from a button usually located on the steering wheel). Since the development of cheap wireless communication technologies such as Bluetooth, LTE, Wi-Fi, RFID and similar, automotive producers and OEMs have designed ECUs that implement such technologies with the goal of improving the experience of the driver and passengers. Safety-related systems such as the OnStar from General Motors, telematic units, communication between smartphones and the vehicle's speakers through Bluetooth, Android Auto and Apple CarPlay. == Threat model == Threat models of the automotive world are based on both real-world and theoretically possible attacks. Most real-world attacks aim at the safety of the people in and around the car, by modifying the cyber-physical capabilities of the vehicle (e.g., steering, braking, accelerating without requiring actions from the driver), while theoretical attacks have been supposed to focus also on privacy-related goals, such as obtaining GPS data on the vehicle, or capturing microphone signals and similar. Regarding the attack surfaces of the vehicle, they are usually divided in long-range, short-range, and local attack surfaces: LTE and DSRC can be considered long-range ones, while Bluetooth and Wi-Fi are usually considered short-range although still wireless. Finally, USB, OBD-II and all the attack surfaces that require physical access to the car are defined as local. An attacker that is able to implement the attack through a long-range surface is considered stronger and more dangerous than the one that requires physical access to the vehicle. In 2015 the possibility of attacks on vehicles already on the market has been proven possible by Miller and Valasek, that managed to disrupt the driving of a Jeep Cherokee while remotely connecting to it through remote wireless communication. === Controller area network attacks === The most common network used in vehicles and the one that is mainly used for safety-related communication is CAN, due to its real-time properties, simplicity, and cheapness. For this reason the majority of real-world attacks have been implemented against ECUs connected through this type of network. The majority of attacks demonstrated either against actual vehicles or in testbeds fall in one or more of the following categories: ==== Sniffing ==== Sniffing in the computer security field generally refers to the possibility of intercepting and logging packets or more generally data from a network. In the case of CAN, since it is a bus network, every node listens to all communication on the network. It is useful for the attacker to read data to learn the behavior of the other nodes of the network before implementing the actual attack. Usually, the final goal of the attacker is not to simply sniff the data on CAN, since the packets passing on this type of network are not usually valuable just to read. ==== Denial of service ==== Denial of service (DoS) in information security is usually described as an attack that has the objective of making a machine or a network unavailable. DoS attacks against ECUs connected to CAN buses can be done both against the network, by abusing the arbitration protocol used by CAN to always win the arbitration, and targeting the single ECU, by abusing the error handling protocol of CAN. In this second case the attacker flags the messages of the victim as faulty to convince the victim of being broken and therefore shut itself off the network. ==== Spoofing ==== Spoofing attacks comprise all cases in which an attacker, by falsifying data, sends messages pretending to be another node of the network. In automotive security usually spoofing attacks are divided into masquerade and replay attacks. Replay attacks are defined as all those where the attacker pretends to be the victim and sends sniffed data that the victim sent in a previous iteration of authentication. Masquerade attacks are, on the contrary, spoofing attacks where the data payload has been created by the attacker. == Real life automotive threat example == Security researchers Charlie Miller and Chris Valasek have successfully demonstrated remote access to a wide variety of vehicle controls using a Jeep Cherokee as the target. They were able to control the radio, environmental controls, windshield wipers, and certain engine and brake functions. The method used to hack the system was implementation of pre-programmed chip into the controller area network (CAN) bus. By inserting this chip into the CAN bus, he was able to send arbitrary message to CAN bus. One other thing that Miller has pointed out is the danger of the CAN bus, as it broadcasts the signal which the message can be caught by the hackers throughout the network. The control of the vehicle was all done remotely, manipulating the system without any physical interaction. Miller states that he could control any of some 1.4 million vehicles in the United States regardless of the location or distance, the only thing needed is for someone to turn on the vehicle to gain access. The work by Miller and Valasek replicated earlier work completed and published by academics in 2010 and 2011 on a different vehicle. The earlier work demonstrated the ability to compromise a vehicle remotely, over multiple wireless channels (including cellular), and the ability to remotely control critical components on the vehicle post-compromise, including the telematics unit and the car's brakes. While the earlier academic work was publicly visible, both in peer-reviewed scholarly publications and in the press, the Miller and Valesek work received even greater public visibility. == Security measures == The increasing complexity of devices and networks in the automotive context requires the application of security measures to limit the capabilities of a potential attacker. Since the early 2000 many different countermeasures have been proposed and, in some cases, applied. Following, a list of the most common security measures: Sub-networks: to limit the attacker capabilities even if he/she manages to access the vehicle from remote through a remotely connected ECU, the networks of the vehicle are divided in multiple sub-networks, and the most critical ECUs are not placed in the same sub-networks of the ECUs that can be accessed from remote. Gateways: the sub-networks are divided by secure gateways or firewalls that block messages from crossing from a sub-network to the other if they were not intended to. Intrusion Detection Systems (IDS): on each critical sub-network, one of the nodes (ECUs) connected to it has the goal of reading all data passing on the sub-network and detect messages that, given some rules, are considered malicious (made by an attacker). The arbitrary messages can be caught by the passenger by using IDS which will notify the owner regarding with unexpected message. Authentication protocols: in order to implement authentication on networks where it is not already implemented (such as CAN), it is possible to design an authentication protocol that works on the higher layers of the ISO OSI model, by using part of the data payload of a message to authenticate the message itself. Hardware Security Modules: since many ECUs are not powerful enough to keep real-time delays whi

  Read more →
• 

  Supertoroid

  In geometry and computer graphics, a supertoroid or supertorus is usually understood to be a family of doughnut-like surfaces (technically, a topological torus) whose shape is defined by mathematical formulas similar to those that define the superellipsoids. The plural of "supertorus" is either supertori or supertoruses. The family was described and named by Alan Barr in 1994. Barr's supertoroids have been fairly popular in computer graphics as a convenient model for many objects, such as smooth frames for rectangular things. One quarter of a supertoroid can provide a smooth and seamless 90-degree joint between two superquadric cylinders. However, they are not algebraic surfaces (except in special cases). == Formulas == Alan Barr's supertoroids are defined by parametric equations similar to the trigonometric equations of the torus, except that the sine and cosine terms are raised to arbitrary powers. Namely, the generic point P(u, v) of the surface is given by P ( u , v ) = ( X ( u , v ) Y ( u , v ) Z ( u , v ) ) = ( ( a + C u s ) C v t ( b + C u s ) S v t S u s ) {\displaystyle P(u,v)=\left({\begin{array}{c}X(u,v)\\Y(u,v)\\Z(u,v)\end{array}}\right)=\left({\begin{array}{c}(a+C_{u}^{s})C_{v}^{t}\\(b+C_{u}^{s})S_{v}^{t}\\S_{u}^{s}\end{array}}\right)} where C θ ε = sgn ⁡ ( cos ⁡ θ ) | cos ⁡ θ | ε , S θ ε = sgn ⁡ ( sin ⁡ θ ) | sin ⁡ θ | ε , {\displaystyle {\begin{aligned}C_{\theta }^{\varepsilon }&=\operatorname {sgn} (\cos \theta )\,\left|\,\cos \theta \,\right|^{\varepsilon },\\S_{\theta }^{\varepsilon }&=\operatorname {sgn} (\sin \theta )\ \left|\,\sin \theta \ \right|^{\varepsilon },\end{aligned}}} sgn is the sign function, and the parameters u, v range from 0 to 360 degrees (0 to 2π radians). In these formulas, the parameter s > 0 controls the "squareness" of the vertical sections, t > 0 controls the squareness of the horizontal sections, and a, b ≥ 1 are the major radii in the x and y directions. With s = t = 1 and a = b = R one obtains the ordinary torus with major radius R and minor radius 1, with the center at the origin and rotational symmetry about the z-axis. In general, the supertorus defined as above spans the intervals: − ( a + 1 ) ≤ x ≤ + ( a + 1 ) − ( b + 1 ) ≤ y ≤ + ( b + 1 ) − 1 ≤ z ≤ + 1 {\displaystyle {\begin{array}{rcccl}-(a+1)&\leq &x&\leq &+(a+1)\\[4pt]-(b+1)&\leq &y&\leq &+(b+1)\\[4pt]-1&\leq &z&\leq &+1\end{array}}} The whole shape is symmetric about the planes x = 0, y = 0, and z = 0. The hole runs in the z direction and spans the intervals − ( a − 1 ) ≤ x ≤ + ( a − 1 ) − ( b − 1 ) ≤ y ≤ + ( b − 1 ) − ∞ ≤ z ≤ + ∞ {\displaystyle {\begin{array}{rcccl}-(a-1)&\leq &x&\leq &+(a-1)\\[4pt]-(b-1)&\leq &y&\leq &+(b-1)\\[4pt]-\infty &\leq &z&\leq &+\infty \end{array}}} A curve of constant u on this surface is a horizontal Lamé curve with exponent ⁠ 2 t , {\displaystyle {\tfrac {2}{t}},} ⁠ scaled in x and y and displaced in z. A curve of constant v, projected on the plane x = 0 or y = 0, is a Lamé curve with exponent ⁠ 2 s , {\displaystyle {\tfrac {2}{s}},} ⁠ scaled and horizontally shifted. If v = 0, the curve is planar and spans the intervals: a − 1 ≤ x ≤ a + 1 − 1 ≤ z ≤ + 1 {\displaystyle {\begin{array}{rcccl}a-1&\leq &x&\leq &a+1\\[4pt]-1&\leq &z&\leq &+1\end{array}}} and similarly if v = 90°, 180°, 270°. The curve is also planar if a = b. In general, if a ≠ b and v is not a multiple of 90 degrees, the curve of constant v will not be planar; and, conversely, a vertical plane section of the supertorus will not be a Lamé curve. The basic supertoroid shape defined above is often modified by non-uniform scaling to yield supertoroids of specific width, length, and vertical thickness. == Plotting code == The following GNU Octave code generates plots of a supertorus:

  Read more →
• 

  Security and Privacy in Computer Systems

  Security and Privacy in Computer Systems is a paper by Willis Ware that was first presented to the public at the 1967 Spring Joint Computer Conference. == Significance == Ware's presentation was the first public conference session about information security and privacy in respect of computer systems, especially networked or remotely-accessed ones. The IEEE Annals of the History of Computing said that Ware's 1967 Spring Joint Computer Conference session, together with 1970's Ware report, marked the start of the field of computer security.

  Read more →
• 

  No Thanks (app)

  No Thanks is a Palestinian boycott-awareness mobile application developed by Palestinian software engineer Ahmed Bashbash, created to assist consumers in identifying and boycotting products associated with companies linked to Israel. Launched in 13 November 2023, the app gained significant attention amid the Gaza–Israel conflict. == History == No Thanks is a mobile application developed by Ahmed Bashbash, a Palestinian software engineer from Gaza residing in Hungary. The app was conceived in October 2023 following the death of Bashbash's brother in an Israeli airstrike on October 31, 2023. His sister had previously died in 2020 due to delayed medical treatment. The app was officially launched on November 13, 2023, and quickly gained traction, got over 100,000 downloads within its first month of release. On November 30, 2023, Google removed the app from its Play Store due to a violation of its content policies. The app's home page included a description: "Welcome to No Thanks, here you can see if the product in your hand supports killing children in Palestine or not," which was deemed to contravene Google's guidelines on hate speech and sensitive content. On December 3, 2023, following changes to the app's description, Google reinstated the app.

  Read more →
• 

  Viewport

  A viewport is a polygon viewing region in computer graphics. In computer graphics theory, there are two region-like notions of relevance when rendering some objects to an image. In textbook terminology, the world coordinate window is the area of interest (meaning what the user wants to visualize) in some application-specific coordinates, e.g. miles, centimeters etc. The word window as used here should not be confused with the GUI window, i.e. the notion used in window managers. Rather it is an analogy with how a window limits what one can see outside a room. In contrast, the viewport is an area (typically rectangular) expressed in rendering-device-specific coordinates, e.g. pixels for screen coordinates, in which the objects of interest are going to be rendered. Clipping to the world-coordinates window is usually applied to the objects before they are passed through the window-to-viewport transformation. For a 2D object, the latter transformation is simply a combination of translation and scaling, the latter not necessarily uniform. An analogy of this transformation process based on traditional photography notions is to equate the world-clipping window with the camera settings and the variously sized prints that can be obtained from the resulting film image as possible viewports. Because the physical-device-based coordinates may not be portable from one device to another, a software abstraction layer known as normalized device coordinates is typically introduced for expressing viewports; it appears for example in the Graphical Kernel System (GKS) and later systems inspired from it. In 3D computer graphics, the viewport refers to the 2D rectangle used to project the 3D scene to the position of a virtual camera. A viewport is a region of the screen used to display a portion of the total image to be shown. In virtual desktops, the viewport is the visible portion of a 2D area which is larger than the visualization device. When viewing a document in a web browser, the viewport is the region of the browser window which contains the visible portion of the document. If the size of the viewport changes, for example as a result of the user resizing the browser window, then the browser may reflow the document (recalculate the locations and sizes of elements of the document). If the document is larger than the viewport, the user can control the portion of the document which is visible by scrolling in the viewport.

  Read more →
• 

  Snap (computer graphics)

  In computer graphics, snapping allows an object to be easily positioned in alignment with grid lines, guide lines or another object, by causing it to automatically jump to an exact position when the user drags it to the proximity of the desired location. Some CAD software provides a "Snap" pull-down menu with diverse options as preferences for the practice of the operation. In Windows, with the "snap windows" option enabled, snapping a window against the top (or side) edge of the screen causes it to change into full screen (or half-screen for multitasking). Software snapping is analogous to hardware detents which serve to indicate discrete values or steps of an input device.

  Read more →
• 

  Text Database and Dictionary of Classic Mayan

  The project Text Database and Dictionary of Classic Mayan (abbr. TWKM) promotes research on the writing and language of pre-Hispanic Maya culture. It is housed in the Faculty of Arts at the University of Bonn and was established with funding from the North Rhine-Westphalian Academy of Sciences, Humanities and the Arts. The project has a projected run-time of fifteen years and is directed by Nikolai Grube from the Department of Anthropology of the Americas at the University of Bonn. The goal of the project is to conduct computer-based studies of all extant Maya hieroglyphic texts from an epigraphic and cultural-historical standpoint, and to produce and publish a database and a comprehensive dictionary of the Classic Mayan language. == Subject of the Project == The text database, as well as the dictionary that will be compiled by the conclusion of the project, will be assembled based on all known texts from the pre-Hispanic Maya culture. These texts were produced and used between approximately the third century B.C. through A.D. 1500, in a region that today includes parts of the countries of Mexico, Guatemala, Belize, and Honduras. The thousands of hieroglyphic inscriptions on monuments, ceramics, or daily objects that have survived into the present offer insight into the language's vocabulary and structure. The project's database and dictionary will digitally represent original spellings using the logo-syllabic Maya hieroglyphs, as well as their transcription and transliteration in the Roman alphabet. The data will be additionally annotated with various epigraphic analyses, translations, and further object-specific information. == Project Partners == TWKM will employ digital technologies in order to compile and make available the data and metadata, as well as to publish the project's research results. The project thereby methodologically positions itself in the field of the digital humanities. The project will be conducted in cooperation with the project partners (below), the research association for the eHumanities TextGrid, as well as the University and Regional Library of Bonn (ULB). The working environment that is currently under construction, in which the data and metadata will be compiled and annotated, will be realized in theTextGrid Laboratory, a software of the virtual research environment. A further component of this software, the TextGrid Repository, will make the data that are authorized for publication freely available online and ensure their long-term storage. The tools for data compilation and annotation attained from the modularly constructed and extended TextGrid lab thereby provide all the necessary materials for facilitating the research team's the typical epigraphic workflow. The workflow usually begins by documenting the texts and the objects on which they are preserved, and by compiling descriptive data. It then continues with the various levels of epigraphic and linguistic analysis, and concludes in the best case scenario with a translation of the analyzed inscription and a corresponding publication. In cooperation with the ULB, selected data will additionally be made available. The project's Virtual Inscription Archive will present online, in the Digital Collections of the ULB, hieroglyphic inscriptions selected from the published data in the repository, including an image of and brief information about the texts and the objects on which they are written, epigraphic analysis, and translation. == Project Goal == One of the project's goals is to produce a dictionary of Classic Mayan, in both digital and print form, towards the end of the project run-time. Additionally, a database with a corpus of inscriptions, including their translations and epigraphic analyses, will be made freely available online. The database furthermore will provide an ontology-like link of the contextual object data with the inscriptions and with each other, thereby allowing a cultural-historical arrangement of all contents within the periods of pre-Hispanic Maya culture. The contents of the database are additionally linked to citations of relevant literature. As a result, the database will also make freely available to both the scientific community and other interested parties a bibliography representing the research history and a base of knowledge concerning ancient Maya culture and script. In addition, the Classic Maya script, in its temporally defined stages of language development, will be gathered into and documented in a comprehensive language corpus with the aid of the information gathered by the project. In collaboration with all project participants, the corpus data can be used, together with the aid of various comparable analyses and also computational linguistic methods, such as inference-based methods, to confirm readings of some hieroglyphs that are currently only partially confirmed, and to eventually completely decipher the Classic Maya script.

  Read more →
• 

  Healthy Together

  Healthy Together is a health technology company that provides software for Health & Humans Services Departments. Healthy Together supports a “One Door” approach to eligibility, enrollment, and management for programs like Medicaid, Supplemental Nutrition Assistance Program, TANF and WIC, as well as behavioral health (988), disease surveillance, vital records, child welfare and more. The platform's use is to increase the reach and efficacy of program initiatives, improve health equity and reduce cost. Software is available in the United States of America with current deployments in Florida, Oklahoma. The United States Department of Veterans Affairs also utilizes Healthy Together's mobile platform. == Development == Healthy Together launched in March 2020 and builds software for public health and health and human services departments. The Florida Department of Health began using the platform in September 2020 to deliver real-time test results to residents. Over 50% of households in Florida have adopted the mobile application. On December 6, 2022, the Advanced Technology Academic Research Center (ATARC) awarded Healthy Together and the State of Florida's Department of Health with a Digital Experience Award at their 2022 GITEC Emerging Technology Award Ceremony in Washington, D.C. to recognize success of the project. The partnership was also highlighted on the Federal News Network's show Federal Drive. The platform is also used at universities in Oklahoma. In November 2022, the United States Department of Veterans Affairs and Healthy Together announced a collaboration to expand access to health records for Veterans. The platform provides 18 million Veterans with access to their health information through their smartphones and mobile devices. In December 2022, the integration was recognized as one of Healthcare IT News' Top 10 stories of 2022.

  Read more →
• 

  Anomaly Detection at Multiple Scales

  Anomaly Detection at Multiple Scales, or ADAMS was a $35 million DARPA project designed to identify patterns and anomalies in very large data sets. It is under DARPA's Information Innovation office and began in 2011 and ended in August 2014 The project was intended to detect and prevent insider threats such as "a soldier in good mental health becoming homicidal or suicidal", an "innocent insider becoming malicious", or "a government employee [who] abuses access privileges to share classified information". Specific cases mentioned are Nadal Malik Hasan and WikiLeaks source Chelsea Manning. Commercial applications may include finance. The intended recipients of the system output are operators in the counterintelligence agencies. A final report was published on May 11, 2015, detailing a system known as Anomaly Detection Engine for Networks, or ADEN, developed by the University of Maryland, College Park, whose goal was to "identify malicious users within a network." Using multiple datasets from Wikipedia, Slashdot, and others, researchers were able to identify vandals and malicious users on a website using both conventional algorithms and artificial intelligence. The Proactive Discovery of Insider Threats Using Graph Analysis and Learning was part of the ADAMS project. The Georgia Tech team includes noted high-performance computing researcher David Bader (computer scientist).

  Read more →
• 

  Visible (mobile app)

  Visible is a health tracking mobile app for people with long COVID and myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). The company was founded by a Harry Leeming, an engineer from London living with long Covid since 2020, and Luke Martin-Fuller. In November 2022, Visible released an open beta of an app that aims to help people pace their activities to avoid post-exertional malaise. The app gathers data on exertion levels, symptom severity, and heart-rate variability. HRV is approximated using a smartphone's camera via a technique called photoplethysmography, and according to the app's developers, can indicate how much someone needs rest. The app is currently free, but is expected to be freemium in the future. Users can also opt to allow their data be used for research purposes. In July 2023, Visible and Imperial College London announced the start of the first two studies. One is on the effects of the menstrual cycle on long COVID symptoms, and the other is on the condition's epidemiology and economic impact. Visible has announced plans to couple the app with activity trackers for continuous monitoring of heart-rate and actimetry data, which the developers claim will be more effective. As of 2022, no clinical trials on Visible's effectiveness have been conducted.

  Read more →