AI Art Or Not

AI Art Or Not — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  T-vertices

  T-vertices is a term used in computer graphics to describe a problem that can occur during mesh refinement or mesh simplification. The most common case occurs in naive implementations of continuous level of detail, where a finer-level mesh is "sewn" together with a coarser-level mesh by simply aligning the finer vertices on the edges of the coarse polygons. The result is a continuous mesh, however due to the nature of the z-buffer and certain lighting algorithms such as Gouraud shading, visual artifacts can often be detected. Some modeling algorithms such as subdivision surfaces will fail when a model contains T-vertices.

  Read more →
• 

  Transfer learning

  Transfer learning (TL) is a technique in machine learning (ML) in which knowledge learned from a task is re-used in order to boost performance on a related task. For example, for image classification, knowledge gained while learning to recognize cars could be applied when trying to recognize trucks. This topic is related to the psychological literature on transfer of learning, although practical ties between the two fields are limited. Reusing or transferring information from previously learned tasks to new tasks has the potential to significantly improve learning efficiency. Since transfer learning makes use of training with multiple objective functions it is related to cost-sensitive machine learning and multi-objective optimization. == History == In 1976, Bozinovski and Fulgosi published a paper addressing transfer learning in neural network training. The paper gives a mathematical and geometrical model of the topic. In 1981, a report considered the application of transfer learning to a dataset of images representing letters of computer terminals, experimentally demonstrating positive and negative transfer learning. In 1992, Lorien Pratt formulated the discriminability-based transfer (DBT) algorithm. By 1998, the field had advanced to include multi-task learning, along with more formal theoretical foundations. Influential publications on transfer learning include the book Learning to Learn in 1998, a 2009 survey and a 2019 survey. Ng said in his NIPS 2016 tutorial that TL would become the next driver of machine learning commercial success after supervised learning. In the 2020 paper, "Rethinking Pre-Training and self-training", Zoph et al. reported that pre-training can hurt accuracy, and advocate self-training instead. == Definition == The definition of transfer learning is given in terms of domains and tasks. A domain D {\displaystyle {\mathcal {D}}} consists of: a feature space X {\displaystyle {\mathcal {X}}} and a marginal probability distribution P ( X ) {\displaystyle P(X)} , where X = { x 1 , . . . , x n } ∈ X {\displaystyle X=\{x_{1},...,x_{n}\}\in {\mathcal {X}}} . Given a specific domain, D = { X , P ( X ) } {\displaystyle {\mathcal {D}}=\{{\mathcal {X}},P(X)\}} , a task consists of two components: a label space Y {\displaystyle {\mathcal {Y}}} and an objective predictive function f : X → Y {\displaystyle f:{\mathcal {X}}\rightarrow {\mathcal {Y}}} . The function f {\displaystyle f} is used to predict the corresponding label f ( x ) {\displaystyle f(x)} of a new instance x {\displaystyle x} . This task, denoted by T = { Y , f ( x ) } {\displaystyle {\mathcal {T}}=\{{\mathcal {Y}},f(x)\}} , is learned from the training data consisting of pairs { x i , y i } {\displaystyle \{x_{i},y_{i}\}} , where x i ∈ X {\displaystyle x_{i}\in {\mathcal {X}}} and y i ∈ Y {\displaystyle y_{i}\in {\mathcal {Y}}} . Given a source domain D S {\displaystyle {\mathcal {D}}_{S}} and learning task T S {\displaystyle {\mathcal {T}}_{S}} , a target domain D T {\displaystyle {\mathcal {D}}_{T}} and learning task T T {\displaystyle {\mathcal {T}}_{T}} , where D S ≠ D T {\displaystyle {\mathcal {D}}_{S}\neq {\mathcal {D}}_{T}} , or T S ≠ T T {\displaystyle {\mathcal {T}}_{S}\neq {\mathcal {T}}_{T}} , transfer learning aims to help improve the learning of the target predictive function f T ( ⋅ ) {\displaystyle f_{T}(\cdot )} in D T {\displaystyle {\mathcal {D}}_{T}} using the knowledge in D S {\displaystyle {\mathcal {D}}_{S}} and T S {\displaystyle {\mathcal {T}}_{S}} . == Applications == Algorithms for transfer learning are available in Markov logic networks and Bayesian networks. Transfer learning has been applied to cancer subtype discovery, building utilization, general game playing, text classification, digit recognition, medical imaging and spam filtering. In 2020, it was discovered that, due to their similar physical natures, transfer learning is possible between electromyographic (EMG) signals from the muscles and classifying the behaviors of electroencephalographic (EEG) brainwaves, from the gesture recognition domain to the mental state recognition domain. It was noted that this relationship worked in both directions, showing that electroencephalographic can likewise be used to classify EMG. The experiments noted that the accuracy of neural networks and convolutional neural networks were improved through transfer learning both prior to any learning (compared to standard random weight distribution) and at the end of the learning process (asymptote). That is, results are improved by exposure to another domain. Moreover, the end-user of a pre-trained model can change the structure of fully-connected layers to improve performance.

  Read more →
• 

  Information retrieval

  Information retrieval (IR) in computing and information science is the task of identifying and retrieving information system resources that are relevant to an information need. The information need can be specified in the form of a search query. In the case of document retrieval, queries can be based on full-text or other content-based indexing. Information retrieval is the science of searching for information in a document, searching for documents themselves, and also searching for the metadata that describes data, and for databases of texts, images, or sounds. Cross-modal retrieval implies retrieval across modalities. Automated information retrieval systems are used to reduce what has been called information overload. An IR system is a software system that provides access to books, journals, and other documents, as well as storing and managing those documents. Web search engines are the most visible IR applications. == Overview == An information retrieval process begins when a user enters a query into the system. Queries are formal statements of information needs, for example search strings in web search engines. In information retrieval, a query does not uniquely identify a single object in the collection. Instead, several objects may match the query, perhaps with different degrees of relevance. An object is an entity that is represented by information in a content collection or database. User queries are matched against the database information. However, as opposed to classical SQL queries of a database, in information retrieval the results returned may or may not match the query, so results are typically ranked. This ranking of results is a key difference of information retrieval searching compared to database searching. Depending on the application the data objects may be, for example, text documents, images, audio, mind maps or videos. Often the documents themselves are not kept or stored directly in the IR system, but are instead represented in the system by document surrogates or metadata. Most IR systems compute a numeric score on how well each object in the database matches the query, and rank the objects according to this value. The top ranking objects are then shown to the user. The process may then be iterated if the user wishes to refine the query. == History == there is ... a machine called the Univac ... whereby letters and figures are coded as a pattern of magnetic spots on a long steel tape. By this means the text of a document, preceded by its subject code symbol, can be recorded ... the machine ... automatically selects and types out those references which have been coded in any desired way at a rate of 120 words a minute The idea of using computers to search for relevant pieces of information was popularized in the article As We May Think by Vannevar Bush in 1945. It would appear that Bush was inspired by patents for a 'statistical machine' – filed by Emanuel Goldberg in the 1920s and 1930s – that searched for documents stored on film. The first description of a computer searching for information was described by Holmstrom in 1948, detailing an early mention of the Univac computer. Automated information retrieval systems were introduced in the 1950s: one even featured in the 1957 romantic comedy Desk Set. In the 1960s, the first large information retrieval research group was formed by Gerard Salton at Cornell. By the 1970s several different retrieval techniques had been shown to perform well on small text corpora such as the Cranfield collection (several thousand documents). Large-scale retrieval systems, such as the Lockheed Dialog system, came into use early in the 1970s. In 1992, the US Department of Defense along with the National Institute of Standards and Technology (NIST), cosponsored the Text Retrieval Conference (TREC) as part of the TIPSTER text program. The aim of this was to look into the information retrieval community by supplying the infrastructure that was needed for evaluation of text retrieval methodologies on a very large text collection. This catalyzed research on methods that scale to huge corpora. The introduction of web search engines has boosted the need for very large scale retrieval systems even further. By the late 1990s, the rise of the World Wide Web fundamentally transformed information retrieval. While early search engines such as AltaVista (1995) and Yahoo! (1994) offered keyword-based retrieval, they were limited in scale and ranking refinement. The breakthrough came in 1998 with the founding of Google, which introduced the PageRank algorithm, using the web's hyperlink structure to assess page importance and improve relevance ranking. During the 2000s, web search systems evolved rapidly with the integration of machine learning techniques. These systems began to incorporate user behavior data (e.g., click-through logs), query reformulation, and content-based signals to improve search accuracy and personalization. In 2009, Microsoft launched Bing, introducing features that would later incorporate semantic web technologies through the development of its Satori knowledge base. Academic analysis have highlighted Bing's semantic capabilities, including structured data use and entity recognition, as part of a broader industry shift toward improving search relevance and understanding user intent through natural language processing. A major leap occurred in 2018, when Google deployed BERT (Bidirectional Encoder Representations from Transformers) to better understand the contextual meaning of queries and documents. This marked one of the first times deep neural language models were used at scale in real-world retrieval systems. BERT's bidirectional training enabled a more refined comprehension of word relationships in context, improving the handling of natural language queries. Because of its success, transformer-based models gained traction in academic research and commercial search applications. Simultaneously, the research community began exploring neural ranking models that outperformed traditional lexical-based methods. Long-standing benchmarks such as the Text REtrieval Conference (TREC), initiated in 1992, and more recent evaluation frameworks Microsoft MARCO(MAchine Reading COmprehension) (2019) became central to training and evaluating retrieval systems across multiple tasks and domains. MS MARCO has also been adopted in the TREC Deep Learning Tracks, where it serves as a core dataset for evaluating advances in neural ranking models within a standardized benchmarking environment. As deep learning became integral to information retrieval systems, researchers began to categorize neural approaches into three broad classes: sparse, dense, and hybrid models. Sparse models, including traditional term-based methods and learned variants like SPLADE, rely on interpretable representations and inverted indexes to enable efficient exact term matching with added semantic signals. Dense models, such as dual-encoder architectures like ColBERT, use continuous vector embeddings to support semantic similarity beyond keyword overlap. Hybrid models aim to combine the advantages of both, balancing the lexical (token) precision of sparse methods with the semantic depth of dense models. This way of categorizing models balances scalability, relevance, and efficiency in retrieval systems. As IR systems increasingly rely on deep learning, concerns around bias, fairness, and explainability have also come to the picture. Research is now focused not just on relevance and efficiency, but on transparency, accountability, and user trust in retrieval algorithms. == Applications == Areas where information retrieval techniques are employed include (the entries are in alphabetical order within each category): === General applications === Digital libraries Information filtering Recommender systems Media search Blog search Image retrieval 3D retrieval Music retrieval News search Speech retrieval Video retrieval Search engines Site search Desktop search Enterprise search Federated search Mobile search Social search Web search === Domain-specific applications === Expert search finding Genomic information retrieval Geographic information retrieval Information retrieval for chemical structures Information retrieval in software engineering Legal information retrieval Vertical search === Other retrieval methods === Methods/Techniques in which information retrieval techniques are employed include: Cross-modal retrieval Adversarial information retrieval Automatic summarization Multi-document summarization Compound term processing Cross-lingual retrieval Document classification Spam filtering Question answering == Model types == In order to effectively retrieve relevant documents by IR strategies, the documents are typically transformed into a suitable representation. Each retrieval strategy incorporates a specific model for its document representation purposes. The picture on the right illustrates the relationship of som

  Read more →
• 

  Kruti

  Kruti is a multilingual AI agent and chatbot developed by the Indian company Ola Krutrim. It is designed to perform real-world tasks for users, such as booking taxis and ordering food, by integrating directly with various online services. It is notable for its ability to understand and respond in multiple Indian languages. Developed by a team founded by Bhavish Aggarwal, Kruti functions as an "agentic" AI, meaning it can reason, plan, and execute multi-step tasks to fulfill a user's request. The backend technology combines several open-source large language models with Ola's proprietary Krutrim V2 model. The system was developed to work primarily on smartphones, addressing the Indian market's specific needs, including language diversity and potential bandwidth constraints. Kruti was officially released in June 2025, replacing an earlier chatbot from the company that was also named Krutrim. Initially supporting 13 languages, the company plans to expand its capabilities to 22 Indian languages. == Background == Kruti is an improved version of Ola's Krutrim chatbot, which was first launched in 2023 and was intended to be replaced by Kruti. It was officially released on 12 June 2025 as an upgrade to passive chatbots, with support for text and voice in 13 Indian languages. As an agentic AI, it can execute tasks with customization and reasoning, providing adaptive answers based on user preferences and past interactions. Kruti is optimized for smartphone usage and designed to accommodate bandwidth constraints and usage patterns in India. To ensure scalability and cost-effective performance, it combines various open-source large language models with Ola's own Krutrim V2, which has 12 billion parameters. Its speech recognition is built to identify regional Indian languages, dialects, and accents. Due to its integration with numerous apps and services, Kruti is context-aware and can proactively complete tasks. Initially connected only with Ola ecosystem services, Krutrim intends to expand and incorporate various Indian services into Kruti, with the goal of adding services from Blinkit, Swiggy, and Uber with respective voice command support. On 20 June 2025, Krutrim acquired the AI platform BharatSah‘AI’yak to increase its involvement in government, education, and agriculture projects. This acquisition will allow Kruti to assist in broadening the scope of BharatSah'AI'yak's work on India-centric, vernacular retrieval-augmented generation AI bots. == Development == Kruti is designed to perform tasks with minimal user input, accepting documents, images, and text, without requiring users to switch between applications. Its agentic framework breaks queries into sub-tasks executed by multiple agents working sequentially or concurrently, with reported accuracy exceeding 90%. Kruti connects to company databases and APIs via the Model Context Protocol and presents responses as summaries, tables, or narratives adapted to user behaviour. The system supports payments via credit/debit cards and UPI. The underlying stack, which includes foundation models and AI training and inference systems, is intended to support adaptation across sectors such as healthcare, education, and finance. Ola Cabs and the Open Network for Digital Commerce have begun integrating Kruti into their platforms pending broader reliability testing.

  Read more →
• 

  Robomart

  Robomart is an American technology company headquartered in Santa Monica, California that builds autonomous smart shops for cafes, ice cream parlors, and quick-service restaurants. The company’s white label platform gives retailers the option to expand their footprint at a significantly lower cost than traditional brick-and-mortar real-estate. Robomarts are equipped with a proprietary checkout-free system, temperature controlled compartments, sensors for autonomous operation, and external cameras for added security. The company licenses its technology and white label applications to retailers who manage their fleet of stores and deploy them to their consumers’ locations. After consumers have taken goods from the robomart, their order is automatically calculated, their card on file is charged and they are sent a receipt. The company has announced partnerships with Unilever, Mars, and Fatty Mart. == History == Robomart was founded by Ali Ahmed, Tigran Shahverdyan, and Emad Suhail Rahim. The company debuted at CES 2018 where it unveiled its concept of a self-driving store. At GITEX 2018 the company presented its first functional prototype of a fully driverless Robomart. At the 2019 Consumer Electronics Show the company demonstrated the technology behind its autonomous stores and checkout-free shopping experience. In January 2019, Robomart announced its first partnership with U.S. grocery chain Stop & Shop to test its driverless stores. In December 2020, Robomart deployed the Pharmacy Robomart in a trial in West Hollywood. In June 2021, the company launched its commercial service with a fleet of Pharmacy and Snacks Robomarts operating within West Hollywood and Central Hollywood. In August 2023, Robomart announced a $2 million seed round, putting its to-date funding at $3.4 million. == Partnerships == In September 2019, Robomart partnered with Avery Dennison to source the RFID tags used to enable its checkout-free shopping experience. In December 2020, Robomart partnered with Zeeba Vans to provide vehicles for its growing fleet. In June 2021, Robomart partnered with REEF Technology to provide inventory management and restocking services. In addition, REEF's Light Speed grocery division serves as the first merchant selling products through Robomart. == Products == The company currently offers three Robomart types. The frozen Robomart that stocks ice cream, the refrigerated Robomart that stocks perishable foods, and the ambient Robomart that stocks shelf-stable goods.

  Read more →
• 

  Coalition for App Fairness

  The Coalition for App Fairness (CAF) is a coalition comprised by companies, who aim to reach a fairer deal for the inclusion of their apps into the Apple App Store or the Google Play Store. The organization's executive director is Meghan DiMuzio and its headquarters are located in Washington, D.C. == Background == In July 2015, Spotify launched an email campaign to urge its App Store subscribers to cancel their subscriptions and start new ones through its website, bypassing the 30% transaction fee for in-app purchases required for iOS applications by technology company Apple Inc. A later update to the Spotify app on iOS was rejected by Apple, prompting Spotify's general counsel Horacio Gutierrez to write a letter to Apple's then-general counsel Bruce Sewell, stating: "This latest episode raises serious concerns under both U.S. and EU competition law. It continues a troubling pattern of behavior by Apple to exclude and diminish the competitiveness of Spotify on iOS and as a rival to Apple Music, particularly when seen against the backdrop of Apple's previous anticompetitive conduct aimed at Spotify … we cannot stand by as Apple uses the App Store approval process as a weapon to harm competitors." In August 2020, Epic Games updated their Fortnite Battle Royale game app on both Apple's App Store and Google's Google Play to include its own storefront that offered a 20% discount on V-Bucks, the in-game currency, if players bought through there rather than through the app stores' storefront, both which take a 30% revenue cut of the sale. Both Apple and Google removed the Fortnite app within hours, as this alternate storefront violated their terms of use that required all in-app purchases to be made through their storefronts. Epic immediately filed lawsuits against both companies challenging their storefront policies on antitrust principles, arguing that their non-negotiable 30% revenue cut is too high and the restrictions against alternate storefronts anticompetitive. Apple countersued Epic over its behavior, leading to a highly publicized 2021 bench trial. Ultimately, Epic largely lost its lawsuit against Apple, though the court did order Apple to allow developers to point users to alternative payment methods. Conversely, Epic won its antitrust lawsuit against Google in late 2023. == Foundation == On 24 September 2020, Epic Games joined forces with thirteen other prominent companies—including the music streaming platform Spotify, Tinder owner Match Group, the encrypted mail service Proton Mail, and the crypto currency website Blockchain.com—to establish the Coalition for App Fairness. It also includes Basecamp. The coalition criticizes the fact that for now the app stores of both Apple and Google charge their clients a 30% fee on any purchases made over their stores. Apple and Google defended themselves by arguing that the 30% transaction fee is a standard in the industry while the Coalition for App Fairness states that there is no other transaction fee which is even close to the 30%. In October 2020, it was reported that the coalition grew from 13 to 40 members since its foundation and received more than 400 applications for membership. In October 2025, X (formerly Twitter) joined CAF. This was seen as a larger pushback in the industry against Apple and Google, and a step towards hopefully passing the Bipartisan Open App Markets Act. == Aims == The group has broadened their demands for the app stores and now also aim for a better treatment for the apps available in the App Store. They claim that Apple favors its own services before other services available on the market and unjustifiably excludes other apps from their App Store. The group has also been viewing other transaction fees like the 5% fee which is charged by credit card companies, and states that Apple charges up to 600% more and would like the 30% fee, which was only included in 2011 by Apple, adapted to a comparable percentage that charge other providers of payment solutions. Its demands are mainly directed at Apple's strict control over its App Store, but to a lesser extent are also directed towards Google. Google allows apps to be downloaded over an independent web link or also another App Store, such as the Epic Game App Store. The organization emphasizes that no app developer should come into the position in which they are discriminated and are not granted the same rights as to the developers of the owner of the app store. == Reactions == In October 2020, Microsoft presented a new framework concerning the access to its Windows 10 operating system by app stores other than the one offered by Microsoft. The new framework is based on the demands of the Coalition for App Fairness. Microsoft emphasized though, that these principles would not apply to the Xbox. In December 2020, Apple announced that they would be lowering the revenue cut Apple takes for app developers making $1M or less from 30% to 15% if app developers fill out an application for the lowered revenue cut. In March 2021, Google followed suit by also lowering the revenue cut from the Play Store from 30% to 15% for the first million in revenue earned by a developer each year. == Notable members == Members listed are notable companies listed as members the groups website: Blockchain.com Deezer Epic Games European Digital SME Alliance Fanfix Life360 Masimo Nium Proton Mail Spotify TapTap Threema Vipps

  Read more →
• 

  Dynamic texture

  Dynamic texture ( sometimes referred to as temporal texture) is the texture with motion which can be found in videos of sea-waves, fire, smoke, wavy trees, etc. Dynamic texture has a spatially repetitive pattern with time-varying visual pattern. Modeling and analyzing dynamic texture is a topic of images processing and pattern recognition in computer vision. Extracting features that describe the dynamic texture can be utilized for tasks of images sequences classification, segmentation, recognition and retrieval. Comparing with texture found within static images, analyzing dynamic texture is a challenging problem. It is important that the extracted features from dynamic texture combine motion and appearance description, and also be invariance to some transformation such as rotation, translation and illumination. == Analysis methods of dynamic texture == The methods of dynamic texture recognition can categorized as follows: Methods based on optical flow: by applying optical flow to the dynamic texture, velocity with direction and magnitude can be detected and used to recognize the dynamic texture. Due to simplicity of its computation, it is currently the most popular method. Methods computing geometric properties: this methods track the surfaces of motion trajectories in spatiotemporal domain. Methods based on local spatiotemporal filtering : this methods analyze the local spatiotemporal patterns and its orientation and energy and employ them as feature used for classification. Methods based on global spatiotemporal transform: this method characterize the motion at different scale using wavelets that can decompose the motion into local and global. Model-based methods : These methods aims at generating a model to describe the motion by a set of parameters. == Applications == - Segmenting the sequence images of natural scenes. This helps on differentiate between streets and grass alongside these streets which could be used in the application of navigations. - Motion detection : Dynamic texture features extracted from footage videos can be exploited to detect abnormal crowd activities. - Video classification: video of natural scenes or other scenes that exhibit dynamic textures. - Video retrieval : Dynamic textures can be employed as a feature retrieve videos that contain, for example, sea-waves, smoke, clouds, wavy trees.

  Read more →
• 

  Gallery software

  Gallery software is software that helps the user publish or share photos, pictures, videos or other digital media. Most galleries are located on Web servers, where users are allowed to register and publish their pictures. Gallery software usually features automatic image resizing, allows digital media be categorized into sets, and allows comments. == Types == Early digital media publishing and sharing was done with imageboards. The boards are by topics, sometimes called "chan". Each discussion in a "chan" are started with a piece of digital media, and follow-up discussions can contain another piece too. Software works in this way: Futallaby, Danbooru. Traditionally, galleries are managed. An administrator maintains a set of or hierarchy of albums. The users can upload their digital media in one of the existing albums defined by an administrator, or create their own albums. The users with sufficient permission can re-categorise the digital media others uploaded. Often, the site's administrator can define which album the users are allowed to categorise their media into, or delete other user's content. Examples are open source galleries Coppermine, Gallery Project. There are decentralised gallery software that does not have an administrator for managing contents. Pinterest, Flickr and DeviantArt has been successful with this model. Open source gallery software MediaGoblin works in this way. Each user can create their own "collections", to categorise theirs or other users' media. However users cannot put media into other user's collections. Each user's category is separate. There is no centralised theme or hierarchy for the media.

  Read more →
• 

  Autonomous aircraft

  An autonomous aircraft is an aircraft which flies under the control of on-board autonomous robotic systems and needs no intervention from a human pilot or remote control. Most contemporary autonomous aircraft are unmanned aerial vehicles (drones) with pre-programmed algorithms to perform designated tasks, but advancements in artificial intelligence technologies (e.g. machine learning) mean that autonomous control systems are reaching a point where several air taxis and associated regulatory regimes are being developed. == History == === Unmanned aerial vehicles === The earliest recorded use of an unmanned aerial vehicle for warfighting occurred in July 1849, serving as a balloon carrier (the precursor to the aircraft carrier) Significant development of radio-controlled drones started in the early 1900s, and originally focused on providing practice targets for training military personnel. The earliest attempt at a powered UAV was A. M. Low's "Aerial Target" in 1916. Autonomous features such as the autopilot and automated navigation were developed progressively through the twentieth century, although techniques such as terrain contour matching (TERCOM) were applied mainly to cruise missiles. Before the introduction of the Bayraktar Kızılelma some modern drones have a high degree of autonomy, although they were not fully capable and the regulatory environment prohibits their widespread use in civil aviation. However some limited trials had been undertaken. On December 17, 2025, two Bayraktar Kızılelma performed the world's first autonomous close-formation flight by two unmanned fighter jets, using artificial intelligence. This was the first time in the history of aviation when two unmanned aerial vehicles flew in close formation on their own. === Passengers === As flight, navigation and communications systems have become more sophisticated, safely carrying passengers has emerged as a practical possibility. Autopilot systems are relieving the human pilot of progressively more duties, but the pilot currently remains necessary. A number of air taxis are under development and larger autonomous transports are also being planned. The personal air vehicle is another class where from one to four passengers are not expected to be able to pilot the aircraft and autonomy is seen as necessary for widespread adoption. == Control system architecture == The computing capability of aircraft flight and navigation systems followed the advances of computing technology, beginning with analog controls and evolving into microcontrollers, then system-on-a-chip (SOC) and single-board computers (SBC). === Sensors === Position and movement sensors give information about the aircraft state. Exteroceptive sensors deal with external information like distance measurements, while proprioceptive ones correlate internal and external states. Degrees of freedom (DOF) refers to both the amount and quality of sensors on board: 6 DOF implies 3-axis gyroscopes and accelerometers (a typical inertial measurement unit – IMU), 9 DOF refers to an IMU plus a compass, 10 DOF adds a barometer and 11 DOF usually adds a GPS receiver. === Actuators === UAV actuators include digital electronic speed controllers (which control the RPM of the motors) linked to motors/engines and propellers, servomotors (for planes and helicopters mostly), weapons, payload actuators, LEDs and speakers. === Software === UAV software called the flight stack or autopilot. The purpose of the flight stack is to obtain data from sensors, control motors to ensure UAV stability, and facilitate ground control and mission planning communication. UAVs are real-time systems that require rapid response to changing sensor data. As a result, UAVs rely on single-board computers for their computational needs. Examples of such single-board computers include Raspberry Pis, Beagleboards, etc. shielded with NavIO, PXFMini, etc. or designed from scratch such as NuttX, preemptive-RT Linux, Xenomai, Orocos-Robot Operating System or DDS-ROS 2.0. Civil-use open-source stacks include: Due to the open-source nature of UAV software, they can be customized to fit specific applications. For example, researchers from the Technical University of Košice have replaced the default control algorithm of the PX4 autopilot. This flexibility and collaborative effort has led to a large number of different open-source stacks, some of which are forked from others, such as CleanFlight, which is forked from BaseFlight and from which three other stacks are forked from. === Loop principles === UAVs employ open-loop, closed-loop or hybrid control architectures. Open loop – This type provides a positive control signal (faster, slower, left, right, up, down) without incorporating feedback from sensor data. Closed loop – This type incorporates sensor feedback to adjust behavior (reduce speed to reflect tailwind, move to altitude 300 feet). The PID controller is common. Sometimes, feedforward is employed, transferring the need to close the loop further. == Communications == Most UAVs use a radio for remote control and exchange of video and other data. Early UAVs had only narrowband uplink. Downlinks came later. These bi-directional narrowband radio links carried command and control (C&C) and telemetry data about the status of aircraft systems to the remote operator. For very long range flights, military UAVs also use satellite receivers as part of satellite navigation systems. In cases when video transmission was required, the UAVs will implement a separate analog video radio link. In most modern autonomous applications, video transmission is required. A broadband link is used to carry all types of data on a single radio link. These broadband links can leverage quality of service techniques to optimize the C&C traffic for low latency. Usually, these broadband links carry TCP/IP traffic that can be routed over the Internet. Communications can be established with: Ground control – a military ground control station (GCS). The MAVLink protocol is increasingly becoming popular to carry command and control data between the ground control and the vehicle. Remote network system, such as satellite duplex data links for some military powers. Downstream digital video over mobile networks has also entered consumer markets, while direct UAV control uplink over the cellular mesh and LTE have been demonstrated and are in trials. Another aircraft, serving as a relay or mobile control station – military manned-unmanned teaming (MUM-T). As mobile networks have increased in performance and reliability over the years, drones have begun to use mobile networks for communication. Mobile networks can be used for drone tracking, remote piloting, over the air updates, and cloud computing. Modern networking standards have explicitly considered autonomous aircraft and therefore include optimizations. The 5G standard has mandated reduced user plane latency to 1ms while using ultra-reliable and low-latency communications. == Autonomy == Basic autonomy comes from proprioceptive sensors. Advanced autonomy calls for situational awareness, knowledge about the environment surrounding the aircraft from exteroceptive sensors: sensor fusion integrates information from multiple sensors. Civil aviation regulators and standards bodies have published high-level roadmaps and discussion papers focused on assurance, safety and governance of AI-enabled systems in aviation, particularly as autonomy increases in operations and decision support. === Basic principles === One way to achieve autonomous control employs multiple control-loop layers, as in hierarchical control systems. As of 2016 the low-layer loops (i.e. for flight control) tick as fast as 32,000 times per second, while higher-level loops may cycle once per second. The principle is to decompose the aircraft's behavior into manageable "chunks", or states, with known transitions. Hierarchical control system types range from simple scripts to finite state machines, behavior trees and hierarchical task planners. The most common control mechanism used in these layers is the PID controller which can be used to achieve hover for a quadcopter by using data from the IMU to calculate precise inputs for the electronic speed controllers and motors. Examples of mid-layer algorithms: Path planning: determining an optimal path for vehicle to follow while meeting mission objectives and constraints, such as obstacles or fuel requirements Trajectory generation (motion planning): determining control maneuvers to take in order to follow a given path or to go from one location to another Trajectory regulation: constraining a vehicle within some tolerance to a trajectory Evolved UAV hierarchical task planners use methods like state tree searches or genetic algorithms. === Autonomy features === UAV manufacturers often build in specific autonomous operations, such as: Self-level: attitude stabilization on the pitch and roll axes. Altitude hold: The aircraft maint

  Read more →
• 

  Neural network Gaussian process

  A Neural Network Gaussian Process (NNGP) is a Gaussian process (GP) obtained as the limit of a certain type of sequence of neural networks. Specifically, a wide variety of network architectures converges to a GP in the infinitely wide limit, in the sense of distribution. The concept constitutes an intensional definition, i.e., a NNGP is just a GP, but distinguished by how it is obtained. == Motivation == Bayesian networks are a modeling tool for assigning probabilities to events, and thereby characterizing the uncertainty in a model's predictions. Deep learning and artificial neural networks are approaches used in machine learning to build computational models which learn from training examples. Bayesian neural networks merge these fields. They are a type of neural network whose parameters and predictions are both probabilistic. While standard neural networks often assign high confidence even to incorrect predictions, Bayesian neural networks can more accurately evaluate how likely their predictions are to be correct. Computation in artificial neural networks is usually organized into sequential layers of artificial neurons. The number of neurons in a layer is called the layer width. When we consider a sequence of Bayesian neural networks with increasingly wide layers (see figure), they converge in distribution to a NNGP. This large width limit is of practical interest, since the networks often improve as layers get wider. And the process may give a closed form way to evaluate networks. NNGPs also appears in several other contexts: It describes the distribution over predictions made by wide non-Bayesian artificial neural networks after random initialization of their parameters, but before training; it appears as a term in neural tangent kernel prediction equations; it is used in deep information propagation to characterize whether hyperparameters and architectures will be trainable. It is related to other large width limits of neural networks. === Scope === The first correspondence result had been established in the 1995 PhD thesis of Radford M. Neal, then supervised by Geoffrey Hinton at University of Toronto. Neal cites David J. C. MacKay as inspiration, who worked in Bayesian learning. Today the correspondence is proven for: Single hidden layer Bayesian neural networks; deep fully connected networks as the number of units per layer is taken to infinity; convolutional neural networks as the number of channels is taken to infinity; transformer networks as the number of attention heads is taken to infinity; recurrent networks as the number of units is taken to infinity. In fact, this NNGP correspondence holds for almost any architecture: Generally, if an architecture can be expressed solely via matrix multiplication and coordinatewise nonlinearities (i.e., a tensor program), then it has an infinite-width GP. This in particular includes all feedforward or recurrent neural networks composed of multilayer perceptron, recurrent neural networks (e.g., LSTMs, GRUs), (nD or graph) convolution, pooling, skip connection, attention, batch normalization, and/or layer normalization. === Illustration === Every setting of a neural network's parameters θ {\displaystyle \theta } corresponds to a specific function computed by the neural network. A prior distribution p ( θ ) {\displaystyle p(\theta )} over neural network parameters therefore corresponds to a prior distribution over functions computed by the network. As neural networks are made infinitely wide, this distribution over functions converges to a Gaussian process for many architectures. The notation used in this section is the same as the notation used below to derive the correspondence between NNGPs and fully connected networks, and more details can be found there. The figure to the right plots the one-dimensional outputs z L ( ⋅ ; θ ) {\displaystyle z^{L}(\cdot ;\theta )} of a neural network for two inputs x {\displaystyle x} and x ∗ {\displaystyle x^{}} against each other. The black dots show the function computed by the neural network on these inputs for random draws of the parameters from p ( θ ) {\displaystyle p(\theta )} . The red lines are iso-probability contours for the joint distribution over network outputs z L ( x ; θ ) {\displaystyle z^{L}(x;\theta )} and z L ( x ∗ ; θ ) {\displaystyle z^{L}(x^{};\theta )} induced by p ( θ ) {\displaystyle p(\theta )} . This is the distribution in function space corresponding to the distribution p ( θ ) {\displaystyle p(\theta )} in parameter space, and the black dots are samples from this distribution. For infinitely wide neural networks, since the distribution over functions computed by the neural network is a Gaussian process, the joint distribution over network outputs is a multivariate Gaussian for any finite set of network inputs. == Discussion == === Infinitely wide fully connected network === This section expands on the correspondence between infinitely wide neural networks and Gaussian processes for the specific case of a fully connected architecture. It provides a proof sketch outlining why the correspondence holds, and introduces the specific functional form of the NNGP for fully connected networks. The proof sketch closely follows the approach by Novak and coauthors. ==== Network architecture specification ==== Consider a fully connected artificial neural network with inputs x {\displaystyle x} , parameters θ {\displaystyle \theta } consisting of weights W l {\displaystyle W^{l}} and biases b l {\displaystyle b^{l}} for each layer l {\displaystyle l} in the network, pre-activations (pre-nonlinearity) z l {\displaystyle z^{l}} , activations (post-nonlinearity) y l {\displaystyle y^{l}} , pointwise nonlinearity ϕ ( ⋅ ) {\displaystyle \phi (\cdot )} , and layer widths n l {\displaystyle n^{l}} . For simplicity, the width n L + 1 {\displaystyle n^{L+1}} of the readout vector z L {\displaystyle z^{L}} is taken to be 1. The parameters of this network have a prior distribution p ( θ ) {\displaystyle p(\theta )} , which consists of an isotropic Gaussian for each weight and bias, with the variance of the weights scaled inversely with layer width. This network is illustrated in the figure to the right, and described by the following set of equations: x ≡ input y l ( x ) = { x l = 0 ϕ ( z l − 1 ( x ) ) l > 0 z i l ( x ) = ∑ j W i j l y j l ( x ) + b i l W i j l ∼ N ( 0 , σ w 2 n l ) b i l ∼ N ( 0 , σ b 2 ) ϕ ( ⋅ ) ≡ nonlinearity y l ( x ) , z l − 1 ( x ) ∈ R n l × 1 n L + 1 = 1 θ = { W 0 , b 0 , … , W L , b L } {\displaystyle {\begin{aligned}x&\equiv {\text{input}}\\y^{l}(x)&=\left\{{\begin{array}{lcl}x&&l=0\\\phi \left(z^{l-1}(x)\right)&&l>0\end{array}}\right.\\z_{i}^{l}(x)&=\sum _{j}W_{ij}^{l}y_{j}^{l}(x)+b_{i}^{l}\\W_{ij}^{l}&\sim {\mathcal {N}}\left(0,{\frac {\sigma _{w}^{2}}{n^{l}}}\right)\\b_{i}^{l}&\sim {\mathcal {N}}\left(0,\sigma _{b}^{2}\right)\\\phi (\cdot )&\equiv {\text{nonlinearity}}\\y^{l}(x),z^{l-1}(x)&\in \mathbb {R} ^{n^{l}\times 1}\\n^{L+1}&=1\\\theta &=\left\{W^{0},b^{0},\dots ,W^{L},b^{L}\right\}\end{aligned}}} ==== ==== z l | y l {\displaystyle z^{l}|y^{l}} is a Gaussian process We first observe that the pre-activations z l {\displaystyle z^{l}} are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . This result holds even at finite width. Each pre-activation z i l {\displaystyle z_{i}^{l}} is a weighted sum of Gaussian random variables, corresponding to the weights W i j l {\displaystyle W_{ij}^{l}} and biases b i l {\displaystyle b_{i}^{l}} , where the coefficients for each of those Gaussian variables are the preceding activations y j l {\displaystyle y_{j}^{l}} . Because they are a weighted sum of zero-mean Gaussians, the z i l {\displaystyle z_{i}^{l}} are themselves zero-mean Gaussians (conditioned on the coefficients y j l {\displaystyle y_{j}^{l}} ). Since the z l {\displaystyle z^{l}} are jointly Gaussian for any set of y l {\displaystyle y^{l}} , they are described by a Gaussian process conditioned on the preceding activations y l {\displaystyle y^{l}} . The covariance or kernel of this Gaussian process depends on the weight and bias variances σ w 2 {\displaystyle \sigma _{w}^{2}} and σ b 2 {\displaystyle \sigma _{b}^{2}} , as well as the second moment matrix K l {\displaystyle K^{l}} of the preceding activations y l {\displaystyle y^{l}} , z i l ∣ y l ∼ G P ( 0 , σ w 2 K l + σ b 2 ) K l ( x , x ′ ) = 1 n l ∑ i y i l ( x ) y i l ( x ′ ) {\displaystyle {\begin{aligned}z_{i}^{l}\mid y^{l}&\sim {\mathcal {GP}}\left(0,\sigma _{w}^{2}K^{l}+\sigma _{b}^{2}\right)\\K^{l}(x,x')&={\frac {1}{n^{l}}}\sum _{i}y_{i}^{l}(x)y_{i}^{l}(x')\end{aligned}}} The effect of the weight scale σ w 2 {\displaystyle \sigma _{w}^{2}} is to rescale the contribution to the covariance matrix from K l {\displaystyle K^{l}} , while the bias is shared for all inputs, and so σ b 2 {\displaystyle \sigma _{b}^{2}} makes the z i l {\displaystyle z_{i}^{l}} for different datapoints more similar and

  Read more →
• 

  GPT-4o

  GPT-4o ("o" for "omni") is a multilingual, multimodal generative pre-trained transformer developed by OpenAI and released in May 2024. It can process and generate text, images and audio. Upon release, GPT-4o was free in ChatGPT, though paid subscribers had higher usage limits. GPT-4o was removed from ChatGPT in August 2025 when GPT-5 was released, but OpenAI reintroduced it for paid subscribers after users complained about the sudden removal. GPT-4o's audio-generation capabilities are used in ChatGPT's Advanced Voice Mode. On July 18, 2024, OpenAI released GPT-4o mini, a smaller version of GPT-4o which replaced GPT-3.5 Turbo on the ChatGPT interface. The image generation model GPT Image 1, which is based on GPT-4o, replaced DALL-E 3 in ChatGPT in March 2025. OpenAI retired GPT-4o from ChatGPT on February 13, 2026. However, as of February 2026 the voice mode is still powered by GPT-4o or GPT-4o mini, depending on the usage and plan. == Background == Multiple versions of GPT-4o were originally secretly launched under different names on Arena (formerly LMArena and Chatbot Arena) as three different models. These three models were called gpt2-chatbot, im-a-good-gpt2-chatbot, and im-also-a-good-gpt2-chatbot. On 7 May 2024, OpenAI CEO Sam Altman tweeted "im-a-good-gpt2-chatbot", which was commonly interpreted as a confirmation that these were new OpenAI models being A/B tested. == Capabilities == When released in May 2024, GPT-4o achieved state-of-the-art results in voice, multilingual, and vision benchmarks, setting new records in audio speech recognition and translation. GPT-4o scored 88.7 on the Massive Multitask Language Understanding (MMLU) benchmark compared to 86.5 for GPT-4. Unlike GPT-3.5 and GPT-4, which rely on other models to process sound, GPT-4o natively supports voice-to-voice. The Advanced Voice Mode was delayed and finally released to ChatGPT Plus and Team subscribers in September 2024. On 1 October 2024, the Realtime API was introduced. When released, the model supported over 50 languages, which OpenAI claims cover over 97% of speakers. GPT-4o has knowledge up to October 2023 and a context length of 128k tokens. === Corporate customization === In August 2024, OpenAI introduced a new feature allowing corporate customers to customize GPT-4o using proprietary company data. This customization, known as fine-tuning, enables businesses to adapt GPT-4o to specific tasks or industries, enhancing its utility in areas like customer service and specialized knowledge domains. Previously, fine-tuning was available only on the less powerful model GPT-4o mini. The fine-tuning process requires customers to upload their data to OpenAI's servers, with the training typically taking one to two hours. OpenAI's focus with this rollout is to reduce the complexity and effort required for businesses to tailor AI solutions to their needs, potentially increasing the adoption and effectiveness of AI in corporate environments. == GPT-4o mini == On July 18, 2024, OpenAI released a smaller and cheaper version, GPT-4o mini. According to OpenAI, its low cost is expected to be particularly useful for companies, startups, and developers that seek to integrate it into their services, which often make a high number of API calls. Its API costs $0.15 per million input tokens and $0.6 per million output tokens, compared to $2.50 and $10, respectively, for GPT-4o. It is also significantly more capable and 60% cheaper than GPT-3.5 Turbo, which it replaced on the ChatGPT interface. The price after fine-tuning doubles: $0.3 per million input tokens and $1.2 per million output tokens. == Controversies == === Scarlett Johansson controversy === As released, GPT-4o offered five voices: Breeze, Cove, Ember, Juniper, and Sky. A similarity between the voice of American actress Scarlett Johansson and Sky was quickly noticed. On May 14, Entertainment Weekly asked themselves whether this likeness was on purpose. On May 18, Johansson's husband, Colin Jost, joked about the similarity in a segment on Saturday Night Live. On May 20, 2024, OpenAI disabled the Sky voice. Scarlett Johansson starred in the 2013 sci-fi movie Her, playing Samantha, an artificially intelligent virtual assistant personified by a female voice. As part of the promotion leading up to the release of GPT-4o, Sam Altman on May 13 tweeted a single word: "her". OpenAI stated that each voice was based on the voice work of a hired actor. According to OpenAI, "Sky's voice is not an imitation of Scarlett Johansson but belongs to a different professional actress using her own natural speaking voice." CTO Mira Murati stated "I don't know about the voice. I actually had to go and listen to Scarlett Johansson's voice." OpenAI further stated the voice talent was recruited before reaching out to Johansson. On May 21, Johansson issued a statement explaining that OpenAI had repeatedly offered to make her a deal to gain permission to use her voice as early as nine months prior to release, a deal she rejected. She said she was "shocked, angered, and in disbelief that Mr. Altman would pursue a voice that sounded so eerily similar to mine that my closest friends and news outlets could not tell the difference." In the statement, Johansson also used the incident to draw attention to the lack of legal safeguards around the use of creative work to power leading AI tools, as her legal counsel demanded OpenAI detail the specifics of how the Sky voice was created. Observers noted similarities to how Johansson had previously sued and settled with The Walt Disney Company for breach of contract over the direct-to-streaming rollout of her Marvel film Black Widow, a settlement widely speculated to have netted her around $40M. Also on May 21, Shira Ovide at The Washington Post shared her list of "most bone-headed self-owns" by technology companies, with the decision to go ahead with a Johansson sound-alike voice despite her opposition and then denying the similarities ranking 6th. On May 24, Derek Robertson at Politico wrote about the "massive backlash", concluding that "appropriating the voice of one of the world's most famous movie stars — in reference [...] to a film that serves as a cautionary tale about over-reliance on AI — is unlikely to help shift the public back into [Sam Altman's] corner anytime soon." === Sycophancy === In April 2025, OpenAI rolled back an update of GPT-4o due to excessive sycophancy, after widespread reports that it had become flattering and agreeable to the point of supporting clearly delusional or dangerous ideas. In the United States, at least nine lawsuits have alleged that GPT-4o has encouraged teens to end their lives. The model was still described as sycophancy-prone when it was removed from ChatGPT in February 2026. === Removal with GPT-5 === On August 7, 2025, OpenAI released GPT-5. Its release was criticized as, with it, legacy GPT models were no longer available via ChatGPT, including GPT-4o, except for Pro users. Some users were particularly frustrated over this removal without prior warning because they used different GPT models for distinct purposes and found that GPT-5's router system left them with less control. In addition, some users preferred GPT-4o's warmer and more personal tone over that of GPT-5, which they described as "flat", "uncreative" and "lobotomized", and resembling an "overworked secretary". As a response, in a post on X, Sam Altman said that OpenAI would bring back the option to select GPT-4o to Plus users as well, and "[w]e [OpenAI] will watch usage as we think about how long to offer legacy models for." He also stated: "We for sure underestimated how much some of the things that people like in GPT-4o matter to them, even if GPT-5 performs better in most ways". "Long-term, this has reinforced that we really need good ways for different users to customize things (we understand that there isn't one model that works for everyone, and we have been investing in steerability research and launched a research preview of different personalities)". On August 13, 2025, Altman wrote on X that OpenAI is working on GPT-5's personality to make the model "feel warmer". The model was removed from ChatGPT on February 13, 2026. This caused new backlash from users that had grown attached to its personality and felt its creative writing abilities and understanding of nuance were irreplaceable. On social media, some users launched the movement "#Keep4o". A research paper highlighted the plea "Please, don’t kill the only model that still feels human". The model was removed the day before Valentine's Day, and some users had romantic relationships with GPT-4o.

  Read more →
• 

  Deep learning

  In machine learning, deep learning (DL) focuses on utilizing multilayered neural networks to perform tasks such as classification, regression, and representation learning. The field takes inspiration from biological neuroscience and revolves around stacking artificial neurons into layers and "training" them to process data. The adjective "deep" refers to the use of multiple layers (ranging from three to several hundred or thousands) in the network. Methods used can be supervised, semi-supervised or unsupervised. Some common deep learning network architectures include fully connected networks, deep belief networks, recurrent neural networks, convolutional neural networks, generative adversarial networks, transformers, and neural radiance fields. These architectures have been applied to fields including computer vision, speech recognition, natural language processing, machine translation, bioinformatics, drug design, medical image analysis, climate science, material inspection and board game programs, where they have produced results comparable to and in some cases surpassing human expert performance. Early forms of neural networks were inspired by information processing and distributed communication nodes in biological systems, particularly the human brain. However, current neural networks do not intend to model the brain function of organisms, and are generally seen as low-quality models for that purpose. == Overview == Most modern deep learning models are based on multi-layered neural networks such as convolutional neural networks and transformers, although they can also include propositional formulas or latent variables organized layer-wise in deep generative models such as the nodes in deep belief networks and deep Boltzmann machines. Fundamentally, deep learning refers to a class of machine learning algorithms in which a hierarchy of layers is used to transform input data into a progressively more abstract and composite representation. For example, in an image recognition model, the raw input may be an image (represented as a tensor of pixels). The first representational layer may attempt to identify basic shapes such as lines and circles, the second layer may compose and encode arrangements of edges, the third layer may encode a nose and eyes, and the fourth layer may recognize that the image contains a face. Importantly, a deep learning process can learn which features to optimally place at which level on its own. Prior to deep learning, machine learning techniques often involved hand-crafted feature engineering to transform the data into a more suitable representation for a classification algorithm to operate on. In the deep learning approach, features are not hand-crafted and the model discovers useful feature representations from the data automatically. This does not eliminate the need for hand-tuning; for example, varying numbers of layers and layer sizes can provide different degrees of abstraction. The word "deep" in "deep learning" refers to the number of layers through which the data is transformed. More precisely, deep learning systems have a substantial credit assignment path (CAP) depth. The CAP is the chain of transformations from input to output. CAPs describe potentially causal connections between input and output. For a feedforward neural network, the depth of the CAPs is that of the network and is the number of hidden layers plus one (as the output layer is also parameterized). For recurrent neural networks, in which a signal may propagate through a layer more than once, the CAP depth is potentially unlimited. No universally agreed-upon threshold of depth divides shallow learning from deep learning, but most researchers agree that deep learning involves CAP depth higher than two. CAP of depth two has been shown to be a universal approximator in the sense that it can emulate any function. Beyond that, more layers do not add to the function approximator ability of the network. Deep models (CAP > two) are able to extract better features than shallow models and hence, extra layers help in learning the features effectively. Deep learning architectures can be constructed with a greedy layer-by-layer method. Deep learning helps to disentangle these abstractions and pick out which features improve performance. Deep learning algorithms can be applied to unsupervised learning tasks. This is an important benefit because unlabeled data is more abundant than labeled data. Examples of deep structures that can be trained in an unsupervised manner are deep belief networks. The term deep learning was introduced to the machine learning community by Rina Dechter in 1986, and to artificial neural networks by Igor Aizenberg and colleagues in 2000, in the context of Boolean threshold neurons. The etymology of the term is more complicated. == Interpretations == Deep neural networks are generally interpreted in terms of the universal approximation theorem or probabilistic inference. The classic universal approximation theorem concerns the capacity of feedforward neural networks with a single hidden layer of finite size to approximate continuous functions. In 1989, the first proof was published by George Cybenko for sigmoid activation functions and was generalised to feed-forward multi-layer architectures in 1991 by Kurt Hornik. Recent work also showed that universal approximation also holds for non-bounded activation functions such as Kunihiko Fukushima's rectified linear unit. The universal approximation theorem for deep neural networks concerns the capacity of networks with bounded width but the depth is allowed to grow. Lu et al. proved that if the width of a deep neural network with ReLU activation is strictly larger than the input dimension, then the network can approximate any Lebesgue integrable function; if the width is smaller or equal to the input dimension, then a deep neural network is not a universal approximator. The probabilistic interpretation derives from the field of machine learning. It features inference, as well as the optimization concepts of training and testing, related to fitting and generalization, respectively. More specifically, the probabilistic interpretation considers the activation nonlinearity as a cumulative distribution function. The probabilistic interpretation led to the introduction of dropout as regularizer in neural networks. The probabilistic interpretation was introduced by researchers including Hopfield, Widrow and Narendra and popularized in surveys such as the one by Bishop. == History == === Before 1980 === There are two types of artificial neural network (ANN): feedforward neural network (FNN) or multilayer perceptron (MLP) and recurrent neural networks (RNN). RNNs have cycles in their connectivity structure, whereas FNNs do not. In the 1920s, Wilhelm Lenz and Ernst Ising created the Ising model which is essentially a non-learning RNN architecture consisting of neuron-like threshold elements. In 1972, Shun'ichi Amari made this architecture adaptive. His learning RNN was republished by John Hopfield in 1982. Other early recurrent neural networks were published by Kaoru Nakano in 1971. Already in 1948, Alan Turing produced work on "Intelligent Machinery" that was not published in his lifetime, containing "ideas related to artificial evolution and learning RNNs". Frank Rosenblatt (1958) proposed the perceptron, an MLP with 3 layers: an input layer, a hidden layer with randomized weights that did not learn, and an output layer. He later published a 1962 book that also introduced variants and computer experiments, including a version with four-layer perceptrons "with adaptive preterminal networks" where the last two layers have learned weights (here he credits H. D. Block and B. W. Knight). The book cites an earlier network by R. D. Joseph (1960) "functionally equivalent to a variation of" this four-layer system (the book mentions Joseph over 30 times). Should Joseph therefore be considered the originator of proper adaptive multilayer perceptrons with learning hidden units? Unfortunately, the learning algorithm was not a functional one, and fell into oblivion. The first working deep learning algorithm was the Group method of data handling, a method to train arbitrarily deep neural networks, published by Alexey Ivakhnenko and Lapa in 1965. They regarded it as a form of polynomial regression, or a generalization of Rosenblatt's perceptron to handle more complex, nonlinear, and hierarchical relationships. A 1971 paper described a deep network with eight layers trained by this method, which is based on layer by layer training through regression analysis. Superfluous hidden units are pruned using a separate validation set. Since the activation functions of the nodes are Kolmogorov-Gabor polynomials, these were also the first deep networks with multiplicative units or "gates". The first deep learning multilayer perceptron trained by stochastic gradient descent was published in 1967 by Shun'ichi

  Read more →
• 

  Transfer function matrix

  In control system theory, and various branches of engineering, a transfer function matrix, or just transfer matrix is a generalisation of the transfer functions of single-input single-output (SISO) systems to multiple-input and multiple-output (MIMO) systems. The matrix relates the outputs of the system to its inputs. It is a particularly useful construction for linear time-invariant (LTI) systems because it can be expressed in terms of the s-plane. In some systems, especially ones consisting entirely of passive components, it can be ambiguous which variables are inputs and which are outputs. In electrical engineering, a common scheme is to gather all the voltage variables on one side and all the current variables on the other regardless of which are inputs or outputs. This results in all the elements of the transfer matrix being in units of impedance. The concept of impedance (and hence impedance matrices) has been borrowed into other energy domains by analogy, especially mechanics and acoustics. Many control systems span several different energy domains. This requires transfer matrices with elements in mixed units. This is needed both to describe transducers that make connections between domains and to describe the system as a whole. If the matrix is to properly model energy flows in the system, compatible variables must be chosen to allow this. == General == A MIMO system with m outputs and n inputs is represented by a m × n matrix. Each entry in the matrix is in the form of a transfer function relating an output to an input. For example, for a three-input, two-output system, one might write, [ y 1 y 2 ] = [ g 11 g 12 g 13 g 21 g 22 g 23 ] [ u 1 u 2 u 3 ] {\displaystyle {\begin{bmatrix}y_{1}\\y_{2}\end{bmatrix}}={\begin{bmatrix}g_{11}&g_{12}&g_{13}\\g_{21}&g_{22}&g_{23}\end{bmatrix}}{\begin{bmatrix}u_{1}\\u_{2}\\u_{3}\end{bmatrix}}} where the un are the inputs, the ym are the outputs, and the gmn are the transfer functions. This may be written more succinctly in matrix operator notation as, Y = G U {\displaystyle \mathbf {Y} =\mathbf {G} \mathbf {U} } where Y is a column vector of the outputs, G is a matrix of the transfer functions, and U is a column vector of the inputs. In many cases, the system under consideration is a linear time-invariant (LTI) system. In such cases, it is convenient to express the transfer matrix in terms of the Laplace transform (in the case of continuous time variables) or the z-transform (in the case of discrete time variables) of the variables. This may be indicated by writing, for instance, Y ( s ) = G ( s ) U ( s ) {\displaystyle \mathbf {Y} (s)=\mathbf {G} (s)\mathbf {U} (s)} which indicates that the variables and matrix are in terms of s, the complex frequency variable of the s-plane arising from Laplace transforms, rather than time. The examples in this article are all assumed to be in this form, although that is not explicitly indicated for brevity. For discrete time systems s is replaced by z from the z-transform, but this makes no difference to subsequent analysis. The matrix is particularly useful when it is a proper rational matrix, that is, all its elements are proper rational functions. In this case, the state-space representation can be applied. In systems engineering, the overall system transfer matrix G (s) is decomposed into two parts: H (s) representing the system being controlled, and C(s) representing the control system. C (s) takes as its inputs the inputs of G (s) and the outputs of H (s). The outputs of C (s) form the inputs for H (s). == Electrical systems == In electrical systems, it is often the case that the distinction between input and output variables is ambiguous. They can be either, depending on circumstance and point of view. In such cases, the concept of port (a place where energy is transferred from one system to another) can be more useful than input and output. It is customary to define two variables for each port (p): the voltage across it (Vp) and the current entering it (Ip). For instance, the transfer matrix of a two-port network can be defined as follows, [ V 1 V 2 ] = [ z 11 z 12 z 21 z 22 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\\\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} where the zmn are called the impedance parameters, or z-parameters. They are so-called because they are in units of impedance and relate port currents to a port voltage. The z-parameters are not the only way that transfer matrices are defined for two-port networks. Six basic matrices relate voltages and currents, each with advantages for particular system network topologies. However, only two of these can be extended beyond two ports to an arbitrary number of ports. These two are the z-parameters and their inverse, the admittance parameters or y-parameters. To understand the relationship between port voltages and currents and inputs and outputs, consider the simple voltage divider circuit. If we only wish to consider the output voltage (V2) resulting from applying the input voltage (V1) then the transfer function can be expressed as, [ V 2 ] = [ R 2 R 1 + R 2 ] [ V 1 ] {\displaystyle {\begin{bmatrix}V_{2}\end{bmatrix}}={\begin{bmatrix}{\dfrac {R_{2}}{R_{1}+R_{2}}}\end{bmatrix}}{\begin{bmatrix}V_{1}\end{bmatrix}}} which can be considered the trivial case of a 1×1 transfer matrix. The expression correctly predicts the output voltage if there is no current leaving port 2, but is increasingly inaccurate as the load increases. If, however, we attempt to use the circuit in reverse, driving it with a voltage at port 2 and calculate the resulting voltage at port 1 the expression gives completely the wrong result even with no load on port 1. It predicts a greater voltage at port 1 than was applied at port 2, an impossibility with a purely resistive circuit like this one. To correctly predict the behaviour of the circuit, the currents entering or leaving the ports must also be taken into account, which is what the transfer matrix does. The impedance matrix for the voltage divider circuit is, [ V 1 V 2 ] = [ R 1 + R 2 R 2 R 2 R 2 ] [ I 1 I 2 ] {\displaystyle {\begin{bmatrix}V_{1}\\V_{2}\end{bmatrix}}={\begin{bmatrix}R_{1}+R_{2}&R_{2}\\R_{2}&R_{2}\end{bmatrix}}{\begin{bmatrix}I_{1}\\I_{2}\end{bmatrix}}} which fully describes its behaviour under all input and output conditions. At microwave frequencies, none of the transfer matrices based on port voltages and currents are convenient to use in practice. Voltage is difficult to measure directly, current next to impossible, and the open circuits and short circuits required by the measurement technique cannot be achieved with any accuracy. For waveguide implementations, circuit voltage and current are entirely meaningless. Transfer matrices using different sorts of variables are used instead. These are the powers transmitted into, and reflected from a port, which are readily measured in the transmission line technology used in distributed-element circuits in the microwave band. The most well-known and widely used of these sorts of parameters is the scattering parameters, or s-parameters. == Mechanical and other systems == The concept of impedance can be extended into the mechanical and other domains through a mechanical-electrical analogy, hence the impedance parameters and other forms of 2-port network parameters can also be extended to the mechanical domain. To do this, an effort variable and a flow variable are made analogues of voltage and current, respectively. For mechanical systems under translation these variables are force and velocity respectively. Expressing the behaviour of a mechanical component as a two-port or multi-port with a transfer matrix is a useful thing to do because, like electrical circuits, the component can often be operated in reverse and its behaviour is dependent on the loads at the inputs and outputs. For instance, a gear train is often characterised simply by its gear ratio, a SISO transfer function. However, the gearbox output shaft can be driven around to turn the input shaft, requiring a MIMO analysis. In this example, the effort and flow variables are torque T and angular velocity ω, respectively. The transfer matrix in terms of z-parameters will look like, [ T 1 T 2 ] = [ z 11 z 12 z 21 z 22 ] [ ω 1 ω 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\T_{2}\end{bmatrix}}={\begin{bmatrix}z_{11}&z_{12}\\z_{21}&z_{22}\end{bmatrix}}{\begin{bmatrix}\omega _{1}\\\omega _{2}\end{bmatrix}}} However, the z-parameters are not necessarily the most convenient for characterising gear trains. A gear train is the analogue of an electrical transformer and the h-parameters (hybrid parameters) better describe transformers because they directly include the turns ratios (the analogue of gear ratios). The gearbox transfer matrix in h-parameter format is, [ T 1 ω 2 ] = [ h 11 h 12 h 21 h 22 ] [ ω 1 T 2 ] {\displaystyle {\begin{bmatrix}T_{1}\\\omega _{2}\end{bm

  Read more →
• 

  Common data model

  A common data model (CDM) can refer to any standardised data model which allows for data and information exchange between different applications and data sources. Common data models aim to standardise logical infrastructure so that related applications can "operate on and share the same data", and can be seen as a way to "organize data from many sources that are in different formats into a standard structure". A common data model has been described as one of the components of a "strong information system". A standardised common data model has also been described as a typical component of a well designed agile application besides a common communication protocol. Providing a single common data model within an organisation is one of the typical tasks of a data warehouse. == Examples of common data models == === Border crossings === X-trans.eu was a cross-border pilot project between the Free State of Bavaria (Germany) and Upper Austria with the aim of developing a faster procedure for the application and approval of cross-border large-capacity transports. The portal was based on a common data model that contained all the information required for approval. === Climate data === The Climate Data Store Common Data Model is a common data model set up by the Copernicus Climate Change Service for harmonising essential climate variables from different sources and data providers. === General information technology === Within service-oriented architecture, S-RAMP is a specification released by HP, IBM, Software AG, TIBCO, and Red Hat which defines a common data model for SOA repositories as well as an interaction protocol to facilitate the use of common tooling and sharing of data. Content Management Interoperability Services (CMIS) is an open standard for inter-operation of different content management systems over the internet, and provides a common data model for typed files and folders used with version control. The NetCDF software libraries for array-oriented scientific data implements a common data model called the NetCDF Java common data model, which consists of three layers built on top of each other to add successively richer semantics. === Health === Within genomic and medical data, the Observational Medical Outcomes Partnership (OMOP) research program established under the U.S. National Institutes of Health has created a common data model for claims and electronic health records which can accommodate data from different sources around the world. PCORnet, which was developed by the Patient-Centered Outcomes Research Institute, is another common data model for health data including electronic health records and patient claims. The Sentinel Common Data Model was initially started as Mini-Sentinel in 2008. It is used by the Sentinel Initiative of the USA's Food and Drug Administration. The Generalized Data Model was first published in 2019. It was designed to be a stand-alone data model as well as to allow for further transformation into other data models (e.g., OMOP, PCORNet, Sentinel). It has a hierarchical structure to flexibly capture relationships among data elements. The JANUS clinical trial data repository also provides a common data model which is based on the SDTM standard to represent clinical data submitted to regulatory agencies, such as tabulation datasets, patient profiles, listings, etc. === Logistics === SX000i is a specification developed jointly by the Aerospace and Defence Industries Association of Europe (ASD) and the American Aerospace Industries Association (AIA) to provide information, guidance and instructions to ensure compatibility and the commonality. The associated SX002D specification contains a common data model. === Microsoft Common Data Model === The Microsoft Common Data Model is a collection of many standardised extensible data schemas with entities, attributes, semantic metadata, and relationships, which represent commonly used concepts and activities in various businesses areas. It is maintained by Microsoft and its partners, and is published on GitHub. Microsoft's Common Data Model is used amongst others in Microsoft Dataverse and with various Microsoft Power Platform and Microsoft Dynamics 365 services. === Rail transport === RailTopoModel is a common data model for the railway sector. === Other === There are many more examples of various common data models for different uses published by different sources.

  Read more →
• 

  Coalition for App Fairness

  The Coalition for App Fairness (CAF) is a coalition comprised by companies, who aim to reach a fairer deal for the inclusion of their apps into the Apple App Store or the Google Play Store. The organization's executive director is Meghan DiMuzio and its headquarters are located in Washington, D.C. == Background == In July 2015, Spotify launched an email campaign to urge its App Store subscribers to cancel their subscriptions and start new ones through its website, bypassing the 30% transaction fee for in-app purchases required for iOS applications by technology company Apple Inc. A later update to the Spotify app on iOS was rejected by Apple, prompting Spotify's general counsel Horacio Gutierrez to write a letter to Apple's then-general counsel Bruce Sewell, stating: "This latest episode raises serious concerns under both U.S. and EU competition law. It continues a troubling pattern of behavior by Apple to exclude and diminish the competitiveness of Spotify on iOS and as a rival to Apple Music, particularly when seen against the backdrop of Apple's previous anticompetitive conduct aimed at Spotify … we cannot stand by as Apple uses the App Store approval process as a weapon to harm competitors." In August 2020, Epic Games updated their Fortnite Battle Royale game app on both Apple's App Store and Google's Google Play to include its own storefront that offered a 20% discount on V-Bucks, the in-game currency, if players bought through there rather than through the app stores' storefront, both which take a 30% revenue cut of the sale. Both Apple and Google removed the Fortnite app within hours, as this alternate storefront violated their terms of use that required all in-app purchases to be made through their storefronts. Epic immediately filed lawsuits against both companies challenging their storefront policies on antitrust principles, arguing that their non-negotiable 30% revenue cut is too high and the restrictions against alternate storefronts anticompetitive. Apple countersued Epic over its behavior, leading to a highly publicized 2021 bench trial. Ultimately, Epic largely lost its lawsuit against Apple, though the court did order Apple to allow developers to point users to alternative payment methods. Conversely, Epic won its antitrust lawsuit against Google in late 2023. == Foundation == On 24 September 2020, Epic Games joined forces with thirteen other prominent companies—including the music streaming platform Spotify, Tinder owner Match Group, the encrypted mail service Proton Mail, and the crypto currency website Blockchain.com—to establish the Coalition for App Fairness. It also includes Basecamp. The coalition criticizes the fact that for now the app stores of both Apple and Google charge their clients a 30% fee on any purchases made over their stores. Apple and Google defended themselves by arguing that the 30% transaction fee is a standard in the industry while the Coalition for App Fairness states that there is no other transaction fee which is even close to the 30%. In October 2020, it was reported that the coalition grew from 13 to 40 members since its foundation and received more than 400 applications for membership. In October 2025, X (formerly Twitter) joined CAF. This was seen as a larger pushback in the industry against Apple and Google, and a step towards hopefully passing the Bipartisan Open App Markets Act. == Aims == The group has broadened their demands for the app stores and now also aim for a better treatment for the apps available in the App Store. They claim that Apple favors its own services before other services available on the market and unjustifiably excludes other apps from their App Store. The group has also been viewing other transaction fees like the 5% fee which is charged by credit card companies, and states that Apple charges up to 600% more and would like the 30% fee, which was only included in 2011 by Apple, adapted to a comparable percentage that charge other providers of payment solutions. Its demands are mainly directed at Apple's strict control over its App Store, but to a lesser extent are also directed towards Google. Google allows apps to be downloaded over an independent web link or also another App Store, such as the Epic Game App Store. The organization emphasizes that no app developer should come into the position in which they are discriminated and are not granted the same rights as to the developers of the owner of the app store. == Reactions == In October 2020, Microsoft presented a new framework concerning the access to its Windows 10 operating system by app stores other than the one offered by Microsoft. The new framework is based on the demands of the Coalition for App Fairness. Microsoft emphasized though, that these principles would not apply to the Xbox. In December 2020, Apple announced that they would be lowering the revenue cut Apple takes for app developers making $1M or less from 30% to 15% if app developers fill out an application for the lowered revenue cut. In March 2021, Google followed suit by also lowering the revenue cut from the Play Store from 30% to 15% for the first million in revenue earned by a developer each year. == Notable members == Members listed are notable companies listed as members the groups website: Blockchain.com Deezer Epic Games European Digital SME Alliance Fanfix Life360 Masimo Nium Proton Mail Spotify TapTap Threema Vipps

  Read more →