AI App Video Generator

AI App Video Generator — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Medical imaging

  Medical imaging is the technique and process of imaging the interior of a body for clinical analysis and medical intervention, as well as visual representation of the function of some organs or tissues (physiology). Medical imaging seeks to reveal internal structures hidden by the skin and bones, as well as to diagnose and treat disease. Medical imaging also establishes a database of normal anatomy and physiology to make it possible to identify abnormalities. Although imaging of removed organs and tissues can be performed for medical reasons, such procedures are usually considered part of pathology instead of medical imaging. Measurement and recording techniques that are not primarily designed to produce images, such as electroencephalography (EEG), magnetoencephalography (MEG), electrocardiography (ECG), and others, represent other technologies that produce data susceptible to representation as a parameter graph versus time or maps that contain data about the measurement locations. In a limited comparison, these technologies can be considered forms of medical imaging in another discipline of medical instrumentation. As of 2010, 5 billion medical imaging studies had been conducted worldwide. Radiation exposure from medical imaging in 2006 made up about 50% of total ionizing radiation exposure in the United States. Medical imaging equipment is manufactured using technology from the semiconductor industry, including CMOS integrated circuit chips, power semiconductor devices, sensors such as image sensors (particularly CMOS sensors) and biosensors, and processors such as microcontrollers, microprocessors, digital signal processors, media processors and system-on-chip devices. As of 2015, annual shipments of medical imaging chips amount to 46 million units and $1.1 billion. The term "noninvasive" is used to denote a procedure where no instrument is introduced into a patient's body, which is the case for most imaging techniques used. == History == In 1972, engineer Godfrey Hounsfield from the British company EMI invented the X-ray computed tomography device for head diagnosis, which is commonly referred to as computed tomography (CT). The CT nucleus method is based on the projecting X-rays through a section of the human head, which are then processed by computer to reconstruct the cross-sectional image, known as image reconstruction. In 1975, EMI successfully developed a CT device for the entire body, enabling the clear acquisition of tomographic images of various parts of the human body. This revolutionary diagnostic technique earned Hounsfield and physicist Allan Cormack the Nobel Prize in Physiology or Medicine in 1979. Digital image processing technology for medical applications was inducted into the Space Foundation's Space Technology Hall of Fame in 1994. By 2010, over 5 billion medical imaging studies had been conducted worldwide. Radiation exposure from medical imaging in 2006 accounted for about 50% of total ionizing radiation exposure in the United States. Medical imaging equipment is manufactured using technology from the semiconductor industry, including CMOS integrated circuit chips, power semiconductor devices, sensors such as image sensors (particularly CMOS sensors) and biosensors, as well as processors like microcontrollers, microprocessors, digital signal processors, media processors and system-on-chip devices. As of 2015, annual shipments of medical imaging chips reached 46 million units, generating a market value of $1.1 billion. == Types == In the clinical context, "invisible light" medical imaging is generally equated to radiology or "clinical imaging". "Visible light" medical imaging involves digital video or still pictures that can be seen without special equipment. Dermatology and wound care are two modalities that use visible light imagery. Interpretation of medical images is generally undertaken by a physician specialising in radiology known as a radiologist; however, this may be undertaken by any healthcare professional who is trained and certified in radiological clinical evaluation. Increasingly interpretation is being undertaken by non-physicians, for example radiographers frequently train in interpretation as part of expanded practice. Diagnostic radiography designates the technical aspects of medical imaging and in particular the acquisition of medical images. The radiographer (also known as a radiologic technologist) is usually responsible for acquiring medical images of diagnostic quality; although other professionals may train in this area, notably some radiological interventions performed by radiologists are done so without a radiographer. As a field of scientific investigation, medical imaging constitutes a sub-discipline of biomedical engineering, medical physics or medicine depending on the context: Research and development in the area of instrumentation, image acquisition (e.g., radiography), modeling and quantification are usually the preserve of biomedical engineering, medical physics, and computer science; Research into the application and interpretation of medical images is usually the preserve of radiology and the medical sub-discipline relevant to medical condition or area of medical science (neuroscience, cardiology, psychiatry, psychology, etc.) under investigation. Many of the techniques developed for medical imaging also have scientific and industrial applications. === Radiography === Two forms of radiographic images are in use in medical imaging. Projection radiography and fluoroscopy, with the latter being useful for catheter guidance. These 2D techniques are still in wide use despite the advance of 3D tomography due to the low cost, high resolution, and depending on the application, lower radiation dosages with 2D technique. This imaging modality uses a wide beam of X-rays for image acquisition and is the first imaging technique available in modern medicine. Fluoroscopy produces real-time images of internal structures of the body in a similar fashion to radiography, but employs a constant input of X-rays, at a lower dose rate. Contrast media, such as barium, iodine, and air are used to visualize internal organs as they work. Fluoroscopy is also used in image-guided procedures when constant feedback during a procedure is required. An image receptor is required to convert the radiation into an image after it has passed through the area of interest. Early on, this was a fluorescing screen, which gave way to an Image Amplifier (IA) which was a large vacuum tube that had the receiving end coated with cesium iodide, and a mirror at the opposite end. Eventually the mirror was replaced with a TV camera. Projectional radiographs, more commonly known as X-rays, are often used to determine the type and extent of a fracture as well as for detecting pathological changes in the lungs. With the use of radio-opaque contrast media, such as barium, they can also be used to visualize the structure of the stomach and intestines – this can help diagnose ulcers or certain types of colon cancer. === Magnetic resonance imaging === A magnetic resonance imaging instrument (MRI scanner), or "nuclear magnetic resonance (NMR) imaging" scanner as it was originally known, uses powerful magnets to polarize and excite hydrogen nuclei (i.e., single protons) of water molecules in human tissue, producing a detectable signal that is spatially encoded, resulting in images of the body. The MRI machine emits a radio frequency (RF) pulse at the resonant frequency of the hydrogen atoms on water molecules. Radio frequency antennas ("RF coils") send the pulse to the area of the body to be examined. The RF pulse is absorbed by protons, causing their direction with respect to the primary magnetic field to change. When the RF pulse is turned off, the protons "relax" back to alignment with the primary magnet and emit radio waves in the process. This radio-frequency emission from the hydrogen atoms on water is what is detected and reconstructed into an image. The resonant frequency of a spinning magnetic dipole (of which protons are one example) is called the Larmor frequency and is determined by the strength of the main magnetic field and the chemical environment of the nuclei of interest. MRI uses three electromagnetic fields: a very strong (typically 1.5 to 3 teslas) static magnetic field to polarize the hydrogen nuclei, called the primary field; gradient fields that can be modified to vary in space and time (on the order of 1 kHz) for spatial encoding, often simply called gradients; and a spatially homogeneous radio-frequency (RF) field for manipulation of the hydrogen nuclei to produce measurable signals, collected through an RF antenna. Like CT, MRI traditionally creates a two-dimensional image of a thin "slice" of the body and is therefore considered a tomographic imaging technique. Modern MRI instruments are capable of producing images in the form of 3D blocks, which may be considered a generalization of the single-slice

  Read more →
• 

  Generalized multidimensional scaling

  Generalized multidimensional scaling (GMDS) is an extension of metric multidimensional scaling, in which the target space is non-Euclidean. When the dissimilarities are distances on a surface and the target space is another surface, GMDS allows finding the minimum-distortion embedding of one surface into another. GMDS is an emerging research direction. Currently, main applications are recognition of deformable objects (e.g. for three-dimensional face recognition) and texture mapping.

  Read more →
• 

  Softplus

  In mathematics and machine learning, the softplus function is f ( x ) = ln ⁡ ( 1 + e x ) . {\displaystyle f(x)=\ln(1+e^{x}).} It is a smooth approximation (in fact, an analytic function) to the ramp function, which is known as the rectifier or ReLU (rectified linear unit) in machine learning. For large negative x {\displaystyle x} it is ln ⁡ ( 1 + e x ) = ln ⁡ ( 1 + ϵ ) ⪆ ln ⁡ 1 = 0 {\displaystyle \ln(1+e^{x})=\ln(1+\epsilon )\gtrapprox \ln 1=0} , so just above 0, while for large positive x {\displaystyle x} it is ln ⁡ ( 1 + e x ) ⪆ ln ⁡ ( e x ) = x {\displaystyle \ln(1+e^{x})\gtrapprox \ln(e^{x})=x} , so just above x {\displaystyle x} . The names softplus and SmoothReLU are used in machine learning. The name "softplus" (2000), by analogy with the earlier softmax (1989) is presumably because it is a smooth (soft) approximation of the positive part of x, which is sometimes denoted with a superscript plus, x + := max ( 0 , x ) {\displaystyle x^{+}:=\max(0,x)} . == Alternative forms == This function can be approximated as: ln ⁡ ( 1 + e x ) ≈ { ln ⁡ 2 , x = 0 , x 1 − e − x / ln ⁡ 2 , x ≠ 0 {\displaystyle \ln \left(1+e^{x}\right)\approx {\begin{cases}\ln 2,&x=0,\\[6pt]{\frac {x}{1-e^{-x/\ln 2}}},&x\neq 0\end{cases}}} By making the change of variables x = y ln ⁡ ( 2 ) {\displaystyle x=y\ln(2)} , this is equivalent to log 2 ⁡ ( 1 + 2 y ) ≈ { 1 , y = 0 , y 1 − e − y , y ≠ 0. {\displaystyle \log _{2}(1+2^{y})\approx {\begin{cases}1,&y=0,\\[6pt]{\frac {y}{1-e^{-y}}},&y\neq 0.\end{cases}}} A sharpness parameter k {\displaystyle k} may be included: f ( x ) = ln ⁡ ( 1 + e k x ) k , f ′ ( x ) = e k x 1 + e k x = 1 1 + e − k x . {\displaystyle f(x)={\frac {\ln(1+e^{kx})}{k}},\qquad \qquad f'(x)={\frac {e^{kx}}{1+e^{kx}}}={\frac {1}{1+e^{-kx}}}.} Additionally, the softplus function is equivalent to the log of the sigmoid function in the following way: − ln ⁡ ( sigmoid ( − x ) ) = − ln ⁡ ( 1 1 + e x ) = ln ⁡ ( 1 + e x ) = softplus ( x ) {\displaystyle -\ln({\text{sigmoid}}(-x))=-\ln \left({\frac {1}{1+e^{x}}}\right)=\ln \left(1+e^{x}\right)={\text{softplus}}(x)} == Related functions == The derivative of softplus is the standard logistic function: f ′ ( x ) = e x 1 + e x = 1 1 + e − x {\displaystyle f'(x)={\frac {e^{x}}{1+e^{x}}}={\frac {1}{1+e^{-x}}}} The logistic function or the sigmoid function is a smooth approximation of the rectifier, the Heaviside step function. === LogSumExp === The multivariable generalization of single-variable softplus is the LogSumExp with the first argument set to zero: L S E 0 + ⁡ ( x 1 , … , x n ) := LSE ⁡ ( 0 , x 1 , … , x n ) = ln ⁡ ( 1 + e x 1 + ⋯ + e x n ) . {\displaystyle \operatorname {LSE_{0}} ^{+}(x_{1},\dots ,x_{n}):=\operatorname {LSE} (0,x_{1},\dots ,x_{n})=\ln(1+e^{x_{1}}+\cdots +e^{x_{n}}).} The LogSumExp function is LSE ⁡ ( x 1 , … , x n ) = ln ⁡ ( e x 1 + ⋯ + e x n ) , {\displaystyle \operatorname {LSE} (x_{1},\dots ,x_{n})=\ln(e^{x_{1}}+\cdots +e^{x_{n}}),} and its gradient is the softmax; the softmax with the first argument set to zero is the multivariable generalization of the logistic function. Both LogSumExp and softmax are used in machine learning. === Convex conjugate === The convex conjugate (specifically, the Legendre transformation) of the softplus function is the negative binary entropy function (with base e). This is because (following the definition of the Legendre transformation: the derivatives are inverse functions) the derivative of softplus is the logistic function, whose inverse function is the logit, which is the derivative of negative binary entropy. Softplus can be interpreted as logistic loss (as a positive number), so, by duality, minimizing logistic loss corresponds to maximizing entropy. This justifies the principle of maximum entropy as loss minimization.

  Read more →
• 

  Quickprop

  Quickprop is an iterative method for determining the minimum of the loss function of an artificial neural network, following an algorithm inspired by the Newton's method. Sometimes, the algorithm is classified to the group of the second order learning methods. It follows a quadratic approximation of the previous gradient step and the current gradient, which is expected to be close to the minimum of the loss function, under the assumption that the loss function is locally approximately square, trying to describe it by means of an upwardly open parabola. The minimum is sought in the vertex of the parabola. The procedure requires only local information of the artificial neuron to which it is applied. The k {\displaystyle k} -th approximation step is given by: Δ ( k ) w i j = Δ ( k − 1 ) w i j ( ∇ i j E ( k ) ∇ i j E ( k − 1 ) − ∇ i j E ( k ) ) {\displaystyle \Delta ^{(k)}\,w_{ij}=\Delta ^{(k-1)}\,w_{ij}\left({\frac {\nabla _{ij}\,E^{(k)}}{\nabla _{ij}\,E^{(k-1)}-\nabla _{ij}\,E^{(k)}}}\right)} Where w i j {\displaystyle w_{ij}} is the weight of input i {\displaystyle i} of neuron j {\displaystyle j} , and E {\displaystyle E} is the loss function. The Quickprop algorithm is an implementation of the error backpropagation algorithm, but the network can behave chaotically during the learning phase due to large step sizes.

  Read more →
• 

  Night Sky (app)

  Night Sky (app) is an application developed and published by indie studio iCandi Apps Ltd. from the UK. Night Sky is a stargazing reference app, where the user can explore a virtual representation of the night sky to identify stars, planets, constellations and satellites. The app is developed specifically for iOS, tvOS and watchOS devices. Night Sky was first released on November 1, 2011 for iOS, and has had multiple updates since launch. Night Sky was mentioned in the September 2016 Apple Keynote during the Apple Watch Series 2 announcement. In October 2016, Night Sky was featured as the Free App of The Week on the Apple App Store. == Reception == Night Sky was featured in Apple's 'Best of 2012' and has also been pre-installed onto iPads in Apple retail stores worldwide.

  Read more →
• 

  Generalized blockmodeling of binary networks

  Generalized blockmodeling of binary networks (also relational blockmodeling) is an approach of generalized blockmodeling, analysing the binary network(s). As most network analyses deal with binary networks, this approach is also considered as the fundamental approach of blockmodeling. This is especially noted, as the set of ideal blocks, when used for interpretation of blockmodels, have binary link patterns, which precludes them to be compared with valued empirical blocks. When analysing the binary networks, the criterion function is measuring block inconsistencies, while also reporting the possible errors. The ideal block in binary blockmodeling has only three types of conditions: "a certain cell must be (at least) 1, a certain cell must be 0 and the f {\displaystyle f} over each row (or column) must be at least 1". It is also used as a basis for developing the generalized blockmodeling of valued networks.

  Read more →
• 

  Synaptic transistor

  A synaptic transistor is an electrical device that can learn in ways similar to a neural synapse. It optimizes its own properties for the functions it has carried out in the past. The device mimics the behavior of the property of neurons called spike-timing-dependent plasticity, or STDP. == Structure == Its structure is similar to that of a field effect transistor, where an ionic liquid takes the place of the gate insulating layer between the gate electrode and the conducting channel. That channel is composed of samarium nickelate (SmNiO3, or SNO) rather than the field effect transistor's doped silicon. == Function == A synaptic transistor has a traditional immediate response whose amount of current that passes between the source and drain contacts varies with voltage applied to the gate electrode. It also produces a much slower learned response such that the conductivity of the SNO layer varies in response to the transistor's STDP history, essentially by shuttling oxygen ions between the SNO and the ionic liquid. The analog of strengthening a synapse is to increase the SNO's conductivity, which essentially increases gain. Similarly, weakening a synapse is analogous to decreasing the SNO's conductivity, lowering the gain. The input and output of the synaptic transistor are continuous analog values, rather than digital on-off signals. While the physical structure of the device has the potential to learn from history, it contains no way to bias the transistor to control the memory effect. An external supervisory circuit converts the time delay between input and output into a voltage applied to the ionic liquid that either drives ions into the SNO or removes them. A network of such devices can learn particular responses to "sensory inputs", with those responses being learned through experience rather than explicitly programmed.

  Read more →
• 

  Elastic net regularization

  In statistics and, in particular, in the fitting of linear or logistic regression models, the elastic net is a regularized regression method that linearly combines the L1 and L2 penalties of the lasso and ridge methods. Nevertheless, elastic net regularization is typically more accurate than both methods with regard to reconstruction. == Specification == The elastic net method overcomes the limitations of the LASSO (least absolute shrinkage and selection operator) method which uses a penalty function based on ‖ β ‖ 1 = ∑ j = 1 p | β j | . {\displaystyle \|\beta \|_{1}=\textstyle \sum _{j=1}^{p}|\beta _{j}|.} Use of this penalty function has several limitations. For example, in the "large p, small n" case (high-dimensional data with few examples), the LASSO selects at most n variables before it saturates. Also if there is a group of highly correlated variables, then the LASSO tends to select one variable from a group and ignore the others. To overcome these limitations, the elastic net adds a quadratic part ( ‖ β ‖ 2 {\displaystyle \|\beta \|^{2}} ) to the penalty, which when used alone is ridge regression (known also as Tikhonov regularization). The estimates from the elastic net method are defined by β ^ ≡ argmin β ( ‖ y − X β ‖ 2 + λ 2 ‖ β ‖ 2 + λ 1 ‖ β ‖ 1 ) . {\displaystyle {\hat {\beta }}\equiv {\underset {\beta }{\operatorname {argmin} }}(\|y-X\beta \|^{2}+\lambda _{2}\|\beta \|^{2}+\lambda _{1}\|\beta \|_{1}).} The quadratic penalty term makes the loss function strongly convex, and it therefore has a unique minimum. The elastic net method includes the LASSO and ridge regression: in other words, each of them is a special case where λ 1 = λ , λ 2 = 0 {\displaystyle \lambda _{1}=\lambda ,\lambda _{2}=0} or λ 1 = 0 , λ 2 = λ {\displaystyle \lambda _{1}=0,\lambda _{2}=\lambda } . Meanwhile, the naive version of elastic net method finds an estimator in a two-stage procedure : first for each fixed λ 2 {\displaystyle \lambda _{2}} it finds the ridge regression coefficients, and then does a LASSO type shrinkage. This kind of estimation incurs a double amount of shrinkage, which leads to increased bias and poor predictions. To improve the prediction performance, sometimes the coefficients of the naive version of elastic net is rescaled by multiplying the estimated coefficients by ( 1 + λ 2 ) {\displaystyle (1+\lambda _{2})} . Examples of where the elastic net method has been applied are: Support vector machine Metric learning Portfolio optimization Cancer prognosis == Reduction to support vector machine == It was proven in 2014 that the elastic net can be reduced to the linear support vector machine. A similar reduction was previously proven for the LASSO in 2014. The authors showed that for every instance of the elastic net, an artificial binary classification problem can be constructed such that the hyper-plane solution of a linear support vector machine (SVM) is identical to the solution β {\displaystyle \beta } (after re-scaling). The reduction immediately enables the use of highly optimized SVM solvers for elastic net problems. It also enables the use of GPU acceleration, which is often already used for large-scale SVM solvers. The reduction is a simple transformation of the original data and regularization constants X ∈ R n × p , y ∈ R n , λ 1 ≥ 0 , λ 2 ≥ 0 {\displaystyle X\in {\mathbb {R} }^{n\times p},y\in {\mathbb {R} }^{n},\lambda _{1}\geq 0,\lambda _{2}\geq 0} into new artificial data instances and a regularization constant that specify a binary classification problem and the SVM regularization constant X 2 ∈ R 2 p × n , y 2 ∈ { − 1 , 1 } 2 p , C ≥ 0. {\displaystyle X_{2}\in {\mathbb {R} }^{2p\times n},y_{2}\in \{-1,1\}^{2p},C\geq 0.} Here, y 2 {\displaystyle y_{2}} consists of binary labels − 1 , 1 {\displaystyle {-1,1}} . When 2 p > n {\displaystyle 2p>n} it is typically faster to solve the linear SVM in the primal, whereas otherwise the dual formulation is faster. Some authors have referred to the transformation as Support Vector Elastic Net (SVEN), and provided the following MATLAB pseudo-code: == Software == "Glmnet: Lasso and elastic-net regularized generalized linear models" is a software which is implemented as an R source package and as a MATLAB toolbox. This includes fast algorithms for estimation of generalized linear models with ℓ1 (the lasso), ℓ2 (ridge regression) and mixtures of the two penalties (the elastic net) using cyclical coordinate descent, computed along a regularization path. JMP Pro 11 includes elastic net regularization, using the Generalized Regression personality with Fit Model. "pensim: Simulation of high-dimensional data and parallelized repeated penalized regression" implements an alternate, parallelised "2D" tuning method of the ℓ parameters, a method claimed to result in improved prediction accuracy. scikit-learn includes linear regression and logistic regression with elastic net regularization. SVEN, a Matlab implementation of Support Vector Elastic Net. This solver reduces the Elastic Net problem to an instance of SVM binary classification and uses a Matlab SVM solver to find the solution. Because SVM is easily parallelizable, the code can be faster than Glmnet on modern hardware. SpaSM, a Matlab implementation of sparse regression, classification and principal component analysis, including elastic net regularized regression. Apache Spark provides support for Elastic Net Regression in its MLlib machine learning library. The method is available as a parameter of the more general LinearRegression class. SAS (software) The SAS procedure Glmselect and SAS Viya procedure Regselect support the use of elastic net regularization for model selection.

  Read more →
• 

  Cross-entropy method

  The cross-entropy (CE) method is a Monte Carlo method for importance sampling and optimization. It is applicable to both combinatorial and continuous problems, with either a static or noisy objective. The method approximates the optimal importance sampling estimator by repeating two phases: Draw a sample from a probability distribution. Minimize the cross-entropy between this distribution and a target distribution to produce a better sample in the next iteration. Reuven Rubinstein developed the method in the context of rare-event simulation, where tiny probabilities must be estimated, for example in network reliability analysis, queueing models, or performance analysis of telecommunication systems. The method has also been applied to the traveling salesman, quadratic assignment, DNA sequence alignment, max-cut and buffer allocation problems. == Estimation via importance sampling == Consider the general problem of estimating the quantity ℓ = E u [ H ( X ) ] = ∫ H ( x ) f ( x ; u ) d x {\displaystyle \ell =\mathbb {E} _{\mathbf {u} }[H(\mathbf {X} )]=\int H(\mathbf {x} )\,f(\mathbf {x} ;\mathbf {u} )\,{\textrm {d}}\mathbf {x} } , where H {\displaystyle H} is some performance function and f ( x ; u ) {\displaystyle f(\mathbf {x} ;\mathbf {u} )} is a member of some parametric family of distributions. Using importance sampling this quantity can be estimated as ℓ ^ = 1 N ∑ i = 1 N H ( X i ) f ( X i ; u ) g ( X i ) {\displaystyle {\hat {\ell }}={\frac {1}{N}}\sum _{i=1}^{N}H(\mathbf {X} _{i}){\frac {f(\mathbf {X} _{i};\mathbf {u} )}{g(\mathbf {X} _{i})}}} , where X 1 , … , X N {\displaystyle \mathbf {X} _{1},\dots ,\mathbf {X} _{N}} is a random sample from g {\displaystyle g\,} . For positive H {\displaystyle H} , the theoretically optimal importance sampling density (PDF) is given by g ∗ ( x ) = H ( x ) f ( x ; u ) / ℓ {\displaystyle g^{}(\mathbf {x} )=H(\mathbf {x} )f(\mathbf {x} ;\mathbf {u} )/\ell } . This, however, depends on the unknown ℓ {\displaystyle \ell } . The CE method aims to approximate the optimal PDF by adaptively selecting members of the parametric family that are closest (in the Kullback–Leibler sense) to the optimal PDF g ∗ {\displaystyle g^{}} . == Generic CE algorithm == Choose initial parameter vector v ( 0 ) {\displaystyle \mathbf {v} ^{(0)}} ; set t = 1. Generate a random sample X 1 , … , X N {\displaystyle \mathbf {X} _{1},\dots ,\mathbf {X} _{N}} from f ( ⋅ ; v ( t − 1 ) ) {\displaystyle f(\cdot ;\mathbf {v} ^{(t-1)})} Solve for v ( t ) {\displaystyle \mathbf {v} ^{(t)}} , where v ( t ) = argmax v ⁡ 1 N ∑ i = 1 N H ( X i ) f ( X i ; u ) f ( X i ; v ( t − 1 ) ) log ⁡ f ( X i ; v ) {\displaystyle \mathbf {v} ^{(t)}=\mathop {\textrm {argmax}} _{\mathbf {v} }{\frac {1}{N}}\sum _{i=1}^{N}H(\mathbf {X} _{i}){\frac {f(\mathbf {X} _{i};\mathbf {u} )}{f(\mathbf {X} _{i};\mathbf {v} ^{(t-1)})}}\log f(\mathbf {X} _{i};\mathbf {v} )} If convergence is reached then stop; otherwise, increase t by 1 and reiterate from step 2. In several cases, the solution to step 3 can be found analytically. Situations in which this occurs are When f {\displaystyle f\,} belongs to the natural exponential family When f {\displaystyle f\,} is discrete with finite support When H ( X ) = I { x ∈ A } {\displaystyle H(\mathbf {X} )=\mathrm {I} _{\{\mathbf {x} \in A\}}} and f ( X i ; u ) = f ( X i ; v ( t − 1 ) ) {\displaystyle f(\mathbf {X} _{i};\mathbf {u} )=f(\mathbf {X} _{i};\mathbf {v} ^{(t-1)})} , then v ( t ) {\displaystyle \mathbf {v} ^{(t)}} corresponds to the maximum likelihood estimator based on those X k ∈ A {\displaystyle \mathbf {X} _{k}\in A} . == Continuous optimization—example == The same CE algorithm can be used for optimization, rather than estimation. Suppose the problem is to maximize some function S {\displaystyle S} , for example, S ( x ) = e − ( x − 2 ) 2 + 0.8 e − ( x + 2 ) 2 {\displaystyle S(x)={\textrm {e}}^{-(x-2)^{2}}+0.8\,{\textrm {e}}^{-(x+2)^{2}}} . To apply CE, one considers first the associated stochastic problem of estimating P θ ( S ( X ) ≥ γ ) {\displaystyle \mathbb {P} _{\boldsymbol {\theta }}(S(X)\geq \gamma )} for a given level γ {\displaystyle \gamma \,} , and parametric family { f ( ⋅ ; θ ) } {\displaystyle \left\{f(\cdot ;{\boldsymbol {\theta }})\right\}} , for example the 1-dimensional Gaussian distribution, parameterized by its mean μ t {\displaystyle \mu _{t}\,} and variance σ t 2 {\displaystyle \sigma _{t}^{2}} (so θ = ( μ , σ 2 ) {\displaystyle {\boldsymbol {\theta }}=(\mu ,\sigma ^{2})} here). Hence, for a given γ {\displaystyle \gamma \,} , the goal is to find θ {\displaystyle {\boldsymbol {\theta }}} so that D K L ( I { S ( x ) ≥ γ } ‖ f θ ) {\displaystyle D_{\mathrm {KL} }({\textrm {I}}_{\{S(x)\geq \gamma \}}\|f_{\boldsymbol {\theta }})} is minimized. This is done by solving the sample version (stochastic counterpart) of the KL divergence minimization problem, as in step 3 above. It turns out that parameters that minimize the stochastic counterpart for this choice of target distribution and parametric family are the sample mean and sample variance corresponding to the elite samples, which are those samples that have objective function value ≥ γ {\displaystyle \geq \gamma } . The worst of the elite samples is then used as the level parameter for the next iteration. This yields the following randomized algorithm that happens to coincide with the so-called Estimation of Multivariate Normal Algorithm (EMNA), an estimation of distribution algorithm. === Pseudocode === // Initialize parameters μ := −6 σ2 := 100 t := 0 maxits := 100 N := 100 Ne := 10 // While maxits not exceeded and not converged while t < maxits and σ2 > ε do // Obtain N samples from current sampling distribution X := SampleGaussian(μ, σ2, N) // Evaluate objective function at sampled points S := exp(−(X − 2) ^ 2) + 0.8 exp(−(X + 2) ^ 2) // Sort X by objective function values in descending order X := sort(X, S) // Update parameters of sampling distribution via elite samples μ := mean(X(1:Ne)) σ2 := var(X(1:Ne)) t := t + 1 // Return mean of final sampling distribution as solution return μ == Related methods == Simulated annealing Genetic algorithms Harmony search Estimation of distribution algorithm Tabu search Natural Evolution Strategy Ant colony optimization algorithms

  Read more →
• 

  GNU Octave

  GNU Octave is a scientific programming language for scientific computing and numerical computation. Among other things, Octave can be used to solve linear and nonlinear problems numerically and to perform other numerical experiments using a language that is mostly compatible with MATLAB. It may also be used as a batch-oriented language. As part of the GNU Project, it is free software under the terms of the GNU General Public License. == History == The project was conceived around 1988. At first it was intended to be a companion to a chemical reactor design course. Full development was started by John W. Eaton in 1992. The first alpha release dates back to 4 January 1993 and on 17 February 1994 version 1.0 was released. Version 9.2.0 was released on 7 June 2024. The program is named after Octave Levenspiel, a former professor of the principal author. Levenspiel was known for his ability to perform quick back-of-the-envelope calculations. == Development history == == Developments == In addition to use on desktops for personal scientific computing, Octave is used in academia and industry. For example, Octave was used on a massive parallel computer at Pittsburgh Supercomputing Center to find vulnerabilities related to guessing social security numbers. Acceleration with OpenCL or CUDA is also possible with use of GPUs. == Technical details == Octave is written in C++ using the C++ standard library. Octave uses an interpreter to execute the Octave scripting language. Octave is extensible using dynamically loadable modules. Octave interpreter has an OpenGL-based graphics engine to create plots, graphs and charts and to save or print them. Alternatively, gnuplot can be used for the same purpose. Octave includes a graphical user interface (GUI) in addition to the traditional command-line interface (CLI); see #User interfaces for details. == Octave, the language == The Octave language is an interpreted programming language. It is a structured programming language (similar to C) and supports many common C standard library functions, and also certain UNIX system calls and functions. However, it does not support passing arguments by reference although function arguments are copy-on-write to avoid unnecessary duplication. Octave programs consist of a list of function calls or a script. The syntax is matrix-based and provides various functions for matrix operations. It supports various data structures and allows object-oriented programming. Its syntax is very similar to MATLAB, and careful programming of a script will allow it to run on both Octave and MATLAB. Because Octave is made available under the GNU General Public License, it may be freely changed, copied and used. The program runs on Microsoft Windows and most Unix and Unix-like operating systems, including Linux, Android, and macOS. == Notable features == === Command and variable name completion === Typing a TAB character on the command line causes Octave to attempt to complete variable, function, and file names (similar to Bash's tab completion). Octave uses the text before the cursor as the initial portion of the name to complete. === Command history === When running interactively, Octave saves the commands typed in an internal buffer so that they can be recalled and edited. === Data structures === Octave includes a limited amount of support for organizing data in structures. In this example, we see a structure x with elements a, b, and c, (an integer, an array, and a string, respectively): === Short-circuit Boolean operators === Octave's && and || logical operators are evaluated in a short-circuit fashion (like the corresponding operators in the C language), in contrast to the element-by-element operators & and |. === Increment and decrement operators === Octave includes the C-like increment and decrement operators ++ and -- in both their prefix and postfix forms. Octave also does augmented assignment, e.g. x += 5. === Unwind-protect === Octave supports a limited form of exception handling modelled after the unwind_protect of Lisp. The general form of an unwind_protect block looks like this: As a general rule, GNU Octave recognizes as termination of a given block either the keyword end (which is compatible with the MATLAB language) or a more specific keyword endblock or, in some cases, end_block. As a consequence, an unwind_protect block can be terminated either with the keyword end_unwind_protect as in the example, or with the more portable keyword end. The cleanup part of the block is always executed. In case an exception is raised by the body part, cleanup is executed immediately before propagating the exception outside the block unwind_protect. GNU Octave also supports another form of exception handling (compatible with the MATLAB language): This latter form differs from an unwind_protect block in two ways. First, exception_handling is only executed when an exception is raised by body. Second, after the execution of exception_handling the exception is not propagated outside the block (unless a rethrow( lasterror ) statement is explicitly inserted within the exception_handling code). === Variable-length argument lists === Octave has a mechanism for handling functions that take an unspecified number of arguments without explicit upper limit. To specify a list of zero or more arguments, use the special argument varargin as the last (or only) argument in the list. varargin is a cell array containing all the input arguments. === Variable-length return lists === A function can be set up to return any number of values by using the special return value varargout. For example: === C++ integration === It is also possible to execute Octave code directly in a C++ program. For example, here is a code snippet for calling rand([10,1]): C and C++ code can be integrated into GNU Octave by creating oct files, or using the MATLAB compatible MEX files. == MATLAB compatibility == Octave has been built with MATLAB compatibility in mind, and shares many features with MATLAB: % Script: myscript.m a = 5; b = a 2 % Function: myfunc.m function result = myfunc(x) result = x^2 + 3; end Matrices as fundamental data type. Built-in support for complex numbers. Powerful built-in math functions and extensive function libraries. Extensibility in the form of user-defined functions. Octave treats incompatibility with MATLAB as a bug; therefore, it could be considered a software clone, which does not infringe software copyright as per Lotus v. Borland court case. MATLAB scripts from the MathWorks' FileExchange repository in principle are compatible with Octave. However, while they are often provided and uploaded by users under an Octave compatible and proper open source BSD license, the FileExchange Terms of use prohibit any usage beside MathWorks' proprietary MATLAB. === Syntax compatibility === There are a few purposeful, albeit minor, syntax additions Archived 2012-04-26 at the Wayback Machine: Comment lines can be prefixed with the # character as well as the % character; Various C-based operators ++, --, +=, =, /= are supported; Elements can be referenced without creating a new variable by cascaded indexing, e.g. [1:10](3); Strings can be defined with the double-quote " character as well as the single-quote ' character; When the variable type is single (a single-precision floating-point number), Octave calculates the "mean" in the single-domain (MATLAB in double-domain) which is faster but gives less accurate results; Blocks can also be terminated with more specific Control structure keywords, i.e., endif, endfor, endwhile, etc.; Functions can be defined within scripts and at the Octave prompt; Presence of a do-until loop (similar to do-while in C). === Function compatibility === Many, but not all, of the numerous MATLAB functions are available in GNU Octave, some of them accessible through packages in Octave Forge. The functions available as part of either core Octave or Forge packages are listed online Archived 2024-03-14 at the Wayback Machine. A list of unavailable functions is included in the Octave function __unimplemented.m__. Unimplemented functions are also listed under many Octave Forge packages in the Octave Wiki. When an unimplemented function is called the following error message is shown: == User interfaces == Octave comes with an official graphical user interface (GUI) and an integrated development environment (IDE) based on Qt. It has been available since Octave 3.8, and has become the default interface (over the command-line interface) with the release of Octave 4.0. It was well-received by an EDN contributor, who wrote "[Octave] now has a very workable GUI" in reviewing the then-new GUI in 2014. Several 3rd-party graphical front-ends have also been developed, like ToolboX for coding education. == GUI applications == With Octave code, the user can create GUI applications. See GUI Development (GNU Octave (version 7.1.0)). Below are some examples: Button, edit control, checkboxTextboxListbox wit

  Read more →
• 

  Almeida–Pineda recurrent backpropagation

  Almeida–Pineda recurrent backpropagation is an extension to the backpropagation algorithm that is applicable to recurrent neural networks. It is a type of supervised learning. It was described somewhat cryptically in Richard Feynman's senior thesis, and rediscovered independently in the context of artificial neural networks by both Fernando Pineda and Luis B. Almeida. A recurrent neural network for this algorithm consists of some input units, some output units and eventually some hidden units. For a given set of (input, target) states, the network is trained to settle into a stable activation state with the output units in the target state, based on a given input state clamped on the input units.

  Read more →
• 

  Generalized canonical correlation

  In statistics, the generalized canonical correlation analysis (gCCA), is a way of making sense of cross-correlation matrices between the sets of random variables when there are more than two sets. While a conventional CCA generalizes principal component analysis (PCA) to two sets of random variables, a gCCA generalizes PCA to more than two sets of random variables. The canonical variables represent those common factors that can be found by a large PCA of all of the transformed random variables after each set underwent its own PCA. == Applications == The Helmert-Wolf blocking (HWB) method of estimating linear regression parameters can find an optimal solution only if all cross-correlations between the data blocks are zero. They can always be made to vanish by introducing a new regression parameter for each common factor. The gCCA method can be used for finding those harmful common factors that create cross-correlation between the blocks. However, no optimal HWB solution exists if the random variables do not contain enough information on all of the new regression parameters.

  Read more →
• 

  Control engineering

  Control engineering, also known as control systems engineering and, in some European countries, automation engineering, is an engineering discipline that deals with control systems, applying control theory to design equipment and systems with desired behaviors in control environments. The discipline of controls overlaps and is usually taught along with electrical engineering, chemical engineering and mechanical engineering at many institutions around the world. The practice uses sensors and detectors to measure the output performance of the process being controlled; these measurements are used to provide corrective feedback helping to achieve the desired performance. Systems designed to perform without requiring human input are called automatic control systems (such as cruise control for regulating the speed of a car). Multi-disciplinary in nature, control systems engineering activities focus on implementation of control systems mainly derived by mathematical modeling of a diverse range of systems. == Overview == Modern day control engineering is a relatively new field of study that gained significant attention during the 20th century with the advancement of technology. It can be broadly defined or classified as practical application of control theory. Control engineering plays an essential role in a wide range of control systems, from simple household washing machines to high-performance fighter aircraft. It seeks to understand physical systems, using mathematical modelling, in terms of inputs, outputs and various components with different behaviors; to use control system design tools to develop controllers for those systems; and to implement controllers in physical systems employing available technology. A system can be mechanical, electrical, fluid, chemical, financial or biological, and its mathematical modelling, analysis and controller design uses control theory in one or many of the time, frequency and complex-s domains, depending on the nature of the design problem. Control engineering is the engineering discipline that focuses on the modeling of a diverse range of dynamic systems (e.g. mechanical systems) and the design of controllers that will cause these systems to behave in the desired manner. Although such controllers need not be electrical, many are and hence control engineering is often viewed as a subfield of electrical engineering. Electrical circuits, digital signal processors and microcontrollers can all be used to implement control systems. Control engineering has a wide range of applications from the flight and propulsion systems of commercial airliners to the cruise control present in many modern automobiles. In most cases, control engineers utilize feedback when designing control systems. This is often accomplished using a proportional–integral–derivative controller (PID controller) system. For example, in an automobile with cruise control the vehicle's speed is continuously monitored and fed back to the system, which adjusts the motor's torque accordingly. Where there is regular feedback, control theory can be used to determine how the system responds to such feedback. In practically all such systems stability is important and control theory can help ensure stability is achieved. Although feedback is an important aspect of control engineering, control engineers may also work on the control of systems without feedback. This is known as open loop control. A classic example of open loop control is a washing machine that runs through a pre-determined cycle without the use of sensors. == History == Automatic control systems were first developed over two thousand years ago. The first feedback control device on record is thought to be the ancient Ktesibios's water clock in Alexandria, Egypt, around the third century BCE. It kept time by regulating the water level in a vessel and, therefore, the water flow from that vessel. This certainly was a successful device as water clocks of similar design were still being made in Baghdad when the Mongols captured the city in 1258 CE. A variety of automatic devices have been used over the centuries to accomplish useful tasks or simply just to entertain. The latter includes the automata, popular in Europe in the 17th and 18th centuries, featuring dancing figures that would repeat the same task over and over again; these automata are examples of open-loop control. Milestones among feedback, or "closed-loop" automatic control devices, include the temperature regulator of a furnace attributed to Drebbel, circa 1620, and the centrifugal flyball governor used for regulating the speed of steam engines by James Watt in 1788. In his 1868 paper "On Governors", James Clerk Maxwell was able to explain instabilities exhibited by the flyball governor using differential equations to describe the control system. This demonstrated the importance and usefulness of mathematical models and methods in understanding complex phenomena, and it signaled the beginning of mathematical control and systems theory. Elements of control theory had appeared earlier but not as dramatically and convincingly as in Maxwell's analysis. Control theory made significant strides over the next century. New mathematical techniques, as well as advances in electronic and computer technologies, made it possible to control significantly more complex dynamical systems than the original flyball governor could stabilize. New mathematical techniques included developments in optimal control in the 1950s and 1960s followed by progress in stochastic, robust, adaptive, nonlinear control methods in the 1970s and 1980s. Applications of control methodology have helped to make possible space travel and communication satellites, safer and more efficient aircraft, cleaner automobile engines, and cleaner and more efficient chemical processes. Before it emerged as a unique discipline, control engineering was practiced as a part of mechanical engineering and control theory was studied as a part of electrical engineering since electrical circuits can often be easily described using control theory techniques. In the first control relationships, a current output was represented by a voltage control input. However, not having adequate technology to implement electrical control systems, designers were left with the option of less efficient and slow responding mechanical systems. A very effective mechanical controller that is still widely used in some hydro plants is the governor. Later on, previous to modern power electronics, process control systems for industrial applications were devised by mechanical engineers using pneumatic and hydraulic control devices, many of which are still in use today. === Mathematical modelling === David Quinn Mayne, (1930–2024) was among the early developers of a rigorous mathematical method for analysing Model predictive control algorithms (MPC). It is currently used in tens of thousands of applications and is a core part of the advanced control technology by hundreds of process control producers. MPC's major strength is its capacity to deal with nonlinearities and hard constraints in a simple and intuitive fashion. His work underpins a class of algorithms that are probably correct, heuristically explainable, and yield control system designs which meet practically important objectives. == Control systems == == Control theory == == Education == At many universities around the world, control engineering courses are taught primarily in electrical engineering and mechanical engineering, but some courses can be instructed in mechatronics engineering, and aerospace engineering. In others, control engineering is connected to computer science, as most control techniques today are implemented through computers, often as embedded systems (as in the automotive field). The field of control within chemical engineering is often known as process control. It deals primarily with the control of variables in a chemical process in a plant. It is taught as part of the undergraduate curriculum of any chemical engineering program and employs many of the same principles in control engineering. Other engineering disciplines also overlap with control engineering as it can be applied to any system for which a suitable model can be derived. However, specialised control engineering departments do exist, for example, in Italy there are several master in Automation & Robotics that are fully specialised in Control engineering or the Department of Automatic Control and Systems Engineering at the University of Sheffield or the Department of Robotics and Control Engineering at the United States Naval Academy and the Department of Control and Automation Engineering at the Istanbul Technical University. Control engineering has diversified applications that include science, finance management, and even human behavior. Students of control engineering may start with a linear control system course dealing with the time and complex-s domain, which req

  Read more →
• 

  Distributional Soft Actor Critic

  Distributional Soft Actor Critic (DSAC) is a suite of model-free off-policy reinforcement learning algorithms, tailored for learning decision-making or control policies in complex systems with continuous action spaces. Distinct from traditional methods that focus solely on expected returns, DSAC algorithms are designed to learn a Gaussian distribution over stochastic returns, called value distribution. This focus on Gaussian value distribution learning notably diminishes value overestimations, which in turn boosts policy performance. Additionally, the value distribution learned by DSAC can also be used for risk-aware policy learning. From a technical standpoint, DSAC is essentially a distributional adaptation of the well-established soft actor-critic (SAC) method. To date, the DSAC family comprises two iterations: the original DSAC-v1 and its successor, DSAC-T (also known as DSAC-v2), with the latter demonstrating superior capabilities over the Soft Actor-Critic (SAC) in Mujoco benchmark tasks. The source code for DSAC-T can be found at the following URL: Jingliang-Duan/DSAC-T. Both iterations have been integrated into an advanced, Pytorch-powered reinforcement learning toolkit named GOPS: GOPS (General Optimal control Problem Solver).

  Read more →
• 

  Out-of-bag error

  Out-of-bag (OOB) error, also called out-of-bag estimate, is a method of measuring the prediction error of random forests, boosted decision trees, and other machine learning models utilizing bootstrap aggregating (bagging). Bagging uses subsampling with replacement to create training samples for the model to learn from. OOB error is the mean prediction error on each training sample xi, using only the trees that did not have xi in their bootstrap sample. Bootstrap aggregating allows one to define an out-of-bag estimate of the prediction performance improvement by evaluating predictions on those observations that were not used in the building of the next base learner. == Out-of-bag dataset == When bootstrap aggregating is performed, two independent sets are created. One set, the bootstrap sample, is the data chosen to be "in-the-bag" by sampling with replacement. The out-of-bag set is all data not chosen in the sampling process. When this process is repeated, such as when building a random forest, many bootstrap samples and OOB sets are created. The OOB sets can be aggregated into one dataset, but each sample is only considered out-of-bag for the trees that do not include it in their bootstrap sample. The picture below shows that for each bag sampled, the data is separated into two groups. This example shows how bagging could be used in the context of diagnosing disease. A set of patients are the original dataset, but each model is trained only by the patients in its bag. The patients in each out-of-bag set can be used to test their respective models. The test would consider whether the model can accurately determine if the patient has the disease. == Calculating out-of-bag error == Since each out-of-bag set is not used to train the model, it is a good test for the performance of the model. The specific calculation of OOB error depends on the implementation of the model, but a general calculation is as follows. Find all models (or trees, in the case of a random forest) that are not trained by the OOB instance. Take the majority vote of these models' result for the OOB instance, compared to the true value of the OOB instance. Compile the OOB error for all instances in the OOB dataset. The bagging process can be customized to fit the needs of a model. To ensure an accurate model, the bootstrap training sample size should be close to that of the original set. Also, the number of iterations (trees) of the model (forest) should be considered to find the true OOB error. The OOB error will stabilize over many iterations so starting with a high number of iterations is a good idea. Shown in the example to the right, the OOB error can be found using the method above once the forest is set up. == Comparison to cross-validation == Out-of-bag error and cross-validation (CV) are different methods of measuring the error estimate of a machine learning model. Over many iterations, the two methods should produce a very similar error estimate. That is, once the OOB error stabilizes, it will converge to the cross-validation (specifically leave-one-out cross-validation) error. The advantage of the OOB method is that it requires less computation and allows one to test the model as it is being trained. == Accuracy and Consistency == Out-of-bag error is used frequently for error estimation within random forests but with the conclusion of a study done by Silke Janitza and Roman Hornung, out-of-bag error has shown to overestimate in settings that include an equal number of observations from all response classes (balanced samples), small sample sizes, a large number of predictor variables, small correlation between predictors, and weak effects.

  Read more →