AI App Quora

AI App Quora — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Butler in a Box

Butler in a Box was an early voice-controlled home automation device developed in 1983 by magician Gus Searcy and programmer Franz Kavan. The device allowed users to control various home electronics, such as lights and phones, using voice commands. It predated modern smart speakers and virtual assistants by several decades. == History == The idea for the Butler in a Box originated in 1983 when Searcy was asked by friends why he couldn't simply command lights to turn on and off if he could pull rabbits out of hats, given his background as a professional magician. Searcy partnered with former IBM programmer Kavan to develop the device, with their first prototype being named "Sidney". The Butler in a Box combined remote control technology with voice recognition to enable control of home devices. However, it faced challenges due to the technological limitations of the era and its high price point of nearly $1,500 (equivalent to around $3,700 in 2021). == Features and functionality == Users could activate the Butler in a Box by speaking a wake word, typically a traditional butler name, and the device would address the user as "boss". It was capable of performing tasks such as: Turning lights on and off, controlling individual zones if lights were connected to remote control modules Making and receiving phone calls Setting timers Pairing with sensors to function as a security alarm system However, the device required extensive voice training for each user, a time-consuming process compared to modern voice recognition. Additionally, settings and trained commands would be lost if power was out for over 3 hours due to the volatile memory technology used at the time. == Reception and legacy == While innovative for its time, the Butler in a Box did not achieve widespread commercial success due to its high price and the technical limitations of the 1980s. Nevertheless, it served as an important early step in the development of home automation and showcased the potential for voice-controlled technology to enhance accessibility and convenience in the home. Decades later, products like Amazon Alexa, Google Home, and Apple's Siri would make voice-controlled smart home devices commonplace and affordable, building on the groundwork laid by early attempts like the Butler in a Box.
Read more →
Coupled pattern learner

Coupled Pattern Learner (CPL) is a machine learning algorithm which couples the semi-supervised learning of categories and relations to forestall the problem of semantic drift associated with boot-strap learning methods. == Coupled Pattern Learner == Semi-supervised learning approaches using a small number of labeled examples with many unlabeled examples are usually unreliable as they produce an internally consistent, but incorrect set of extractions. CPL solves this problem by simultaneously learning classifiers for many different categories and relations in the presence of an ontology defining constraints that couple the training of these classifiers. It was introduced by Andrew Carlson, Justin Betteridge, Estevam R. Hruschka Jr. and Tom M. Mitchell in 2009. == CPL overview == CPL is an approach to semi-supervised learning that yields more accurate results by coupling the training of many information extractors. Basic idea behind CPL is that semi-supervised training of a single type of extractor such as ‘coach’ is much more difficult than simultaneously training many extractors that cover a variety of inter-related entity and relation types. Using prior knowledge about the relationships between these different entities and relations CPL makes unlabeled data as a useful constraint during training. For e.g., ‘coach(x)’ implies ‘person(x)’ and ‘not sport(x)’. == CPL description == === Coupling of predicates === CPL primarily relies on the notion of coupling the learning of multiple functions so as to constrain the semi-supervised learning problem. CPL constrains the learned function in two ways. Sharing among same-arity predicates according to logical relations Relation argument type-checking === Sharing among same-arity predicates === Each predicate P in the ontology has a list of other same-arity predicates with which P is mutually exclusive. If A is mutually exclusive with predicate B, A’s positive instances and patterns become negative instances and negative patterns for B. For example, if ‘city’, having an instance ‘Boston’ and a pattern ‘mayor of arg1’, is mutually exclusive with ‘scientist’, then ‘Boston’ and ‘mayor of arg1’ will become a negative instance and a negative pattern respectively for ‘scientist.’ Further, Some categories are declared to be a subset of another category. For e.g., ‘athlete’ is a subset of ‘person’. === Relation argument type-checking === This is a type checking information used to couple the learning of relations and categories. For example, the arguments of the ‘ceoOf’ relation are declared to be of the categories ‘person’ and ‘company’. CPL does not promote a pair of noun phrases as an instance of a relation unless the two noun phrases are classified as belonging to the correct argument types. === Algorithm description === Following is a quick summary of the CPL algorithm. Input: An ontology O, and a text corpus C Output: Trusted instances/patterns for each predicate for i=1,2,...,∞ do foreach predicate p in O do EXTRACT candidate instances/contextual patterns using recently promoted patterns/instances; FILTER candidates that violate coupling; RANK candidate instances/patterns; PROMOTE top candidates; end end ==== Inputs ==== A large corpus of Part-Of-Speech tagged sentences and an initial ontology with predefined categories, relations, mutually exclusive relationships between same-arity predicates, subset relationships between some categories, seed instances for all predicates, and seed patterns for the categories. ==== Candidate extraction ==== CPL finds new candidate instances by using newly promoted patterns to extract the noun phrases that co-occur with those patterns in the text corpus. CPL extracts, Category Instances Category Patterns Relation Instances Relation Patterns ==== Candidate filtering ==== Candidate instances and patterns are filtered to maintain high precision, and to avoid extremely specific patterns. An instance is only considered for assessment if it co-occurs with at least two promoted patterns in the text corpus, and if its co-occurrence count with all promoted patterns is at least three times greater than its co-occurrence count with negative patterns. ==== Candidate ranking ==== CPL ranks candidate instances using the number of promoted patterns that they co-occur with so that candidates that occur with more patterns are ranked higher. Patterns are ranked using an estimate of the precision of each pattern. ==== Candidate promotion ==== CPL ranks the candidates according to their assessment scores and promotes at most 100 instances and 5 patterns for each predicate. Instances and patterns are only promoted if they co-occur with at least two promoted patterns or instances, respectively. == Meta-Bootstrap Learner == Meta-Bootstrap Learner (MBL) was also proposed by the authors of CPL. Meta-Bootstrap learner couples the training of multiple extraction techniques with a multi-view constraint, which requires the extractors to agree. It makes addition of coupling constraints on top of existing extraction algorithms, while treating them as black boxes, feasible. MBL assumes that the errors made by different extraction techniques are independent. Following is a quick summary of MBL. Input: An ontology O, a set of extractors ε Output: Trusted instances for each predicate for i=1,2,...,∞ do foreach predicate p in O do foreach extractor e in ε do Extract new candidates for p using e with recently promoted instances; end FILTER candidates that violate mutual-exclusion or type-checking constraints; PROMOTE candidates that were extracted by all extractors; end end Subordinate algorithms used with MBL do not promote any instance on their own, they report the evidence about each candidate to MBL and MBL is responsible for promoting instances. == Applications == In their paper authors have presented results showing the potential of CPL to contribute new facts to existing repository of semantic knowledge, Freebase
Read more →
Quantification (machine learning)

In machine learning, quantification (variously called learning to quantify, or supervised prevalence estimation, or class prior estimation) is the task of using supervised learning in order to train models (quantifiers) that estimate the relative frequencies (also known as prevalence values) of the classes of interest in a sample of unlabelled data items. For instance, in a sample of 100,000 unlabelled tweets known to express opinions about a certain political candidate, a quantifier may be used to estimate the percentage of these tweets which belong to class `Positive' (i.e., which manifest a positive stance towards this candidate), and to do the same for classes `Neutral' and `Negative'. Quantification may also be viewed as the task of training predictors that estimate a (discrete) probability distribution, i.e., that generate a predicted distribution that approximates the unknown true distribution of the items across the classes of interest. Quantification is different from classification, since the goal of classification is to predict the class labels of individual data items, while the goal of quantification it to predict the class prevalence values of sets of data items. Quantification is also different from regression, since in regression the training data items have real-valued labels, while in quantification the training data items have class labels. It has been shown in multiple research works that performing quantification by classifying all unlabelled instances and then counting the instances that have been attributed to each class (the 'classify and count' method) usually leads to suboptimal quantification accuracy. This suboptimality may be seen as a direct consequence of 'Vapnik's principle', which states: If you possess a restricted amount of information for solving some problem, try to solve the problem directly and never solve a more general problem as an intermediate step. It is possible that the available information is sufficient for a direct solution but is insufficient for solving a more general intermediate problem. In our case, the problem to be solved directly is quantification, while the more general intermediate problem is classification. As a result of the suboptimality of the 'classify and count' method, quantification has evolved as a task in its own right, different (in goals, methods, techniques, and evaluation measures) from classification. == Quantification tasks == === Quantification tasks according to the set of classes === The main variants of quantification, according to the characteristics of the set of classes used, are: Binary quantification, corresponding to the case in which there are only n = 2 {\displaystyle n=2} classes and each data item belongs to exactly one of them; Single-label multiclass quantification, corresponding to the case in which there are n > 2 {\displaystyle n>2} classes and each data item belongs to exactly one of them; Multi-label multiclass quantification, corresponding to the case in which there are n ≥ 2 {\displaystyle n\geq 2} classes and each data item can belong to zero, one, or several classes at the same time; Ordinal quantification, corresponding to the single-label multiclass case in which a total order is defined on the set of classes. Regression quantification, a task which stands to 'standard' quantification as regression stands to classification. Strictly speaking, this task is not a quantification task as defined above (since the individual items do not have class labels but are labelled by real values), but has enough commonalities with other quantification tasks to be considered one of them. Most known quantification methods address the binary case or the single-label multiclass case, and only few of them address the multi-label, ordinal, and regression cases. Binary-only methods include the Mixture Model (MM) method, the HDy method, SVM(KLD), and SVM(Q). Methods that can deal with both the binary case and the single-label multiclass case include probabilistic classify and count (PCC), adjusted classify and count (ACC), probabilistic adjusted classify and count (PACC), the Saerens-Latinne-Decaestecker EM-based method (SLD), and KDEy. Methods for multi-label quantification include regression-based quantification (RQ) and label powerset-based quantification (LPQ). Methods for the ordinal case include ordinal versions of the above-mentioned ACC, PACC, and SLD methods, and ordinal versions of the above-mentioned HDy method. Methods for the regression case include Regress and splice and Adjusted regress and sum. === Quantification tasks according to the type of data === Several subtasks of quantification may be identified according to the type of data involved. Example such tasks are: Quantification of networked data. This task consists of performing quantification when the datapoints are members of a relation, i.e., are interlinked. As such, this task is a strict relative of collective classification. Quantification over time. This task consists of performing quantification on sets that become available in a temporal sequence, i.e., as a data stream, and finds application in contexts in which class prevalence values must be monitored over time. == Evaluation measures for quantification == Several evaluation measures can be used for evaluating the error of a quantification method. Since quantification consists of generating a predicted probability distribution that estimates a true probability distribution, these evaluation measures are ones that compare two probability distributions. Most evaluation measures for quantification belong to the class of divergences. Evaluation measures for binary quantification, single-label multiclass quantification, and multi-label quantification, are Absolute Error Squared Error Relative Absolute Error Kullback–Leibler divergence Pearson Divergence Evaluation measures for ordinal quantification are Normalized Match Distance (a particular case of the Earth Mover's Distance) Root Normalized Order-Aware Distance == Applications == Quantification is of special interest in fields such as the social sciences, epidemiology, market research, allocating resources, and ecological modelling, since these fields are inherently concerned with aggregate data. However, quantification is also useful as a building block for solving other downstream tasks, such as improving the accuracy of classifiers on out-of-distribution data, measuring classifier bias and ranker bias, and estimating the accuracy of classifiers on out-of-distribution data. == Resources == LQ 2021: the 1st International Workshop on Learning to Quantify LQ 2022: the 2nd International Workshop on Learning to Quantify LQ 2023: the 3rd International Workshop on Learning to Quantify LQ 2024: the 4th International Workshop on Learning to Quantify LQ 2025: the 5th International Workshop on Learning to Quantify LeQua 2022: the 1st Data Challenge on Learning to Quantify LeQua 2024: the 2nd Data Challenge on Learning to Quantify QuaPy: An open-source Python-based software library for quantification QuantificationLib: A Python library for quantification and prevalence estimation
Read more →
Meta-Labeling

Meta-labeling, also known as corrective AI, is a machine learning (ML) technique utilized in quantitative finance to enhance the performance of investment and trading strategies, developed in 2017 by Marcos López de Prado at Guggenheim Partners and Cornell University. The core idea is to separate the decision of trade direction (side) from the decision of trade sizing, addressing the inefficiencies of simultaneously learning both side and size predictions. The side decision involves forecasting market movements (long, short, neutral), while the size decision focuses on risk management and profitability. It serves as a secondary decision-making layer that evaluates the signals generated by a primary predictive model. By assessing the confidence and likely profitability of those signals, meta-labeling allows investors and algorithms to dynamically size positions and suppress false positives. == Motivation == Meta-labeling is designed to improve precision without sacrificing recall. As noted by López de Prado, attempting to model both the direction and the magnitude of a trade using a single algorithm can result in poor generalization. By separating these tasks, meta-labeling enables greater flexibility and robustness: Enhances control over capital allocation. Reduces overfitting by limiting model complexity. Allows the use of interpretability tools and tailored thresholds to manage risk. Enables dynamic trade suppression in unfavorable regimes. == Applications == Meta-labeling has been applied in a variety of financial ML contexts, including: Algorithmic trading: Filtering and sizing trades to reduce false positives. Portfolio optimization: Scaling exposure across multiple signals with differing confidence levels. Risk management: Dynamically disabling strategies in adverse market conditions. Model validation: Interpreting when and why a model may be underperforming due to regime shifts. == General architecture == Meta-labeling decouples two core components of systematic trading strategies: directional prediction and position sizing. The process involves training a primary model to generate trade signals (e.g., buy, sell, or hold) and then training a secondary model to determine whether each signal is likely to lead to a profitable trade. The second model outputs a probability that is interpreted as the confidence in the forecast, which can be used to adjust the position size or to filter out unreliable trades. Meta-labeling is typically implemented as a three-stage process: Primary model (M1): Predicts the direction or label of a financial outcome using features such as market prices, returns, or volatility indicators. A typical output is directional, e.g., Y ∈ {−1,0,1}, representing short, neutral, or long positions. Secondary model (M2): A binary classifier trained to predict whether the primary model's prediction will be profitable. The target variable is a binary meta-label F ∈ { 0 , 1 } {\displaystyle F\in \{0,1\}} . Inputs can include features used in the primary model, performance diagnostics, or market regime data. Position sizing algorithm (M3): Translates the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 1: Forecasting side === Primary model architecture Figure 1 Figure 1 presents the architecture of a primary model. It focuses on forecasting the side of the trade. Following the example, this model (M1) takes in input data – such as open-high-low-close data and determines the side of the position to take: a negative number is a short position, and positive number is a long position, the range is set between −1 and 1 (the closer it is to −1 or 1, the stronger the models conviction is). When training the model, the labels are −1 and 1, based on the direction of forward returns for some predefined investment horizon. The researcher may decide to apply a recall check (τ: "Tau") by setting a minimum threshold that the initial output needs to be to qualify of a short or long position (if the threshold is not met, no side forecast is predicted, leading to closing of any open positions), this leads to the primary model output which is one of three possible side forecasts: −1, 0, or 1. The primary model also generates evaluation data which can be used by the secondary model, to improve performance of size forecasts. Some examples of evaluation data include rolling accuracy, F1, recall, precision, and AUC scores. === Stage 2: Filtering out false positives === General meta-labeling architecture Figure 2 Next comes the phase of filtering out false positives, by applying a secondary machine learning model (M2), which is a binary classifier trained to determine if the trade will be profitable or not. The model takes as input four general groupings of data: General input data which is predictive of a false positive. For example the last 30 days rolling volatility of the underlying asset. Evaluation data. Market state and regime data, one may find that macro economic data or clustering the market into regimes may help as specific trading strategies are known to perform better in particular regimes. Example: momentum based strategies perform best in periods with low volatility and strong directional moves. Primary models initial input which is a value between −1 and 1. This highlights the strength of the primary models conviction. The output of the model is a value between −1 and 1 (if using a Tanh function) which will indicate the strength of the conviction that a short or long position is profitable, or it could simply be between 0 and 1 (using a sigmoid function) if one only wanted to know if it made money or not. This output allows filtering out trades that are likely to lead to losses. One could stop at this point or use the outputs of the secondary model as inputs to a position sizing algorithm (M3) which could further enhance strategy performance metrics by translating the output probability of the secondary model into a position size. Higher confidence scores result in larger allocations, while lower confidence leads to reduced or zero exposure. === Stage 3: Optimizing position sizes === ==== Position sizing methods (M3) ==== Various algorithms have been proposed for transforming predicted probabilities into trade sizes: All-or-nothing: Allocate 100% of capital if the probability exceeds a predefined threshold (e.g., 0.5); otherwise, do not trade. Model confidence: Use the probability score directly as the fraction of capital allocated. Linear scaling: Rescale the model's probabilities using min-max normalization based on the training data. Normal CDF (NCDF): Use a normal cumulative distribution function applied to a z-statistic derived from the predicted probability. Empirical CDF (ECDF): Rank probabilities based on their percentile in the training data to ensure relative allocation. Sigmoid Optimal Position Sizing (SOPS): Applies a smooth non-linear sigmoid transformation optimized to maximize risk-adjusted returns (Sharpe ratio). ==== Model calibration ==== Each machine learning algorithm used in meta-labeling tends to produce outputs with different characteristic distributions; for example, some are approximately normally distributed, whereas others exhibit a pronounced U-shape, concentrating probabilities near the extremes. Due to these varying distributions, simply summing the outputs of different models can inadvertently lead to uneven weighting of signals, biasing trade decisions. To address this, model calibration techniques are essential to adjust the predicted probabilities towards frequentist probabilities, ensuring that model outputs reflect true likelihoods more accurately. Two common calibration techniques are: Platt scaling (Sigmoid scaling): Suitable for correcting S-shaped calibration plots typically produced by models such as support vector machines (SVMs). Isotonic regression: Fits a non-decreasing step function to probabilities and is effective particularly with larger datasets, though it can sometimes lead to overfitting. Transforming predictions to frequentist probabilities is crucial as it provides probabilistic outputs that are directly interpretable as the actual likelihood of an event occurring. Such calibration significantly enhances the effectiveness of fixed position sizing methods, reducing maximum drawdowns and increasing risk-adjusted returns. However, calibration has less impact on position sizing methods that directly estimate parameters from the training data, such as ECDF and SOPS, suggesting that calibration is a critical step mainly for fixed methods that rely heavily on raw model outputs. =
Read more →
Dave's Redistricting

Dave's Redistricting App (DRA) is an online web app originally created by Dave Bradlee that allows anyone to simulate redistricting a U.S. state's congressional and legislative districts. == Purpose == According to Bradlee, the software was designed to "put power in people's hands," and so that they "can see how the process works, so it's a little less mysterious than it was 10 years ago." Bradlee has noticed that many citizens are taking this process seriously and using his app to create legitimate redistricting maps that could be put in place. Some websites have called Bradlee the pioneer and cause of the rise of do-it-yourself redistricting. States such as Montana in 2021 allowed the general population to use it to submit redistricting proposals following the 2020 United States Census. Dave's Redistricting has frequently been mentioned as a resource that can be used to combat gerrymandering, given that the public has free access to it. Political science firms such as FiveThirtyEight have used the website to draw examples of gerrymandered districts, including on their famous Atlas of Redistricting. Dave Bradlee built the first generation of DRA. DRA 2020 is built by a small team of volunteers—Dave Bradlee, Terry Crowley, Alec Ramsay, and David Rinn—all with a shared passion for technology & democracy and all Microsoft veterans. Their mission is to empower civic organizations and citizen activists to advocate for fair congressional and legislative districts and increased transparency in the redistricting process. == Functions == Users can redraw the congressional and state legislative districts for all 50 states, the District of Columbia, and Puerto Rico using a variety of census and election datasets including Cook PVI. Maps can be optimized for different criteria. DRA 2020 added several major features to the first generation app: Sharing & collaborative editing of maps, like Google Docs Multiple statewide elections for all 50 states including the ability to import your own data Comprehensive analytics for evaluating and comparing maps Custom overlays, and Block-level editing DRA remains free to use. == Versions == 2.2: This uses Bing Maps, an outdated software that projects the districts of a single state onto a map of the United States. 2.5: After Bing Maps announced that it would no longer be updating for the foreseen future, the U.S. Map feature was removed. DRA 2020: At the end of 2018, a beta version of 2020 was released. This version that did not require Microsoft Silverlight and could be used in any web browser. DRA 2020 has been under continuous development since and is built using React (JavaScript library), Mapbox, OpenStreetMap, TypeScript, Node.js, Amazon Web Services, as well as many open source components, tools, and icons.
Read more →
Artificial reproduction

Artificial reproduction is the re-creation of life brought about by means other than natural ones. It is new life built by human plans and projects. Examples include artificial selection, artificial insemination, in vitro fertilization, artificial womb, artificial cloning, and kinematic replication. Artificial reproduction is one aspect of artificial life. Artificial reproduction can be categorized into one of two classes according to its capacity to be self-sufficient: non-assisted reproductive technology and assisted reproductive technology. Cutting plants' stems and placing them in compost is a form of assisted artificial reproduction, xenobots are an example of a more autonomous type of reproduction, while the artificial womb presented in the movie the Matrix illustrates a non assisted hypothetical technology. The idea of artificial reproduction has led to various technologies. == Theology == Humans have aspired to create life since immemorial times. Most theologies and religions have conceived this possibility as exclusive of deities. Christian religions consider the possibility of artificial reproduction, in most cases, as heretical and sinful. == Philosophy == Although ancient Greek philosophy raised the concept that man could imitate the creative capacity of nature, classic Greeks thought that if possible, human beings would reproduce things as nature does, and vice versa, nature would do the things that man does in the same way. Aristotle, for example, wrote that if nature made tables, it would make them just as men do. In other words, Aristotle said that if nature were to create a table, such table will look like a human-made table. Correspondingly, Descartes envisioned the human body, and nature, as a machine. Cartesian philosophy does not stop seeing a perfect mirror between nature and the artificial. However, Kant revolutionized this old idea by criticizing such naturalism. Kant pedagogically wrote: "Reason, in order to be taught by nature, must approach nature with its principles in one hand, according to which the agreement among appearances can count as laws, and, in the other hand, the experiment thought out in accord with these principles—in order to be instructed by nature not like a pupil, who has recited to him whatever the teacher wants to say, but like an appointed judge who compels witnesses to answer the questions he puts to them.". Humans are not instructed by nature but rather use nature as raw material to invent. Humans find alternatives to the natural restrictions imposed by natural laws thus, nature is not necessarily mirrored. In accordance with Kant (and contrary to what Aristotle thought) Karl Marx, Alfred Whitehead, Jaques Derrida and Juan David García Bacca noticed that nature is incapable of reproducing tables; or airplanes, or submarines, or computers. If nature tried to create airplanes, it would produce birds. If nature tried to create submarines, it would get fishes. If nature tried to create computers, brains would grow. And if nature tried to create man, modern man, monkeys will be evolved. According to Whitehead, if we look for something natural in artificial life, in the most elaborate cases, if anything, only atoms remain natural. Juan David Garcia Bacca summarized, “It will not come out from wood, it will not be born, a galley; from clay, a vessel; from linen, a dress; from iron, a lever,...From natural, artificial. In the artificial, the natural is reduced to a simple raw material, even though it is perfectly specified with natural specification. The artificial is the real, positive, and original negation of the natural: of species, of genus and of essence. Thus, its ontology is superior to natural ontology. And for this very reason Marx did not attach any importance to Darwin, whose evolutionism is confined to the natural order: to changes, at most, from variety to variety, from species to species... natural. For the same reason, nature has no dialectics, even though continuous evolution and selection can occur. The dialectic cannot emerge from the natural, for deeper reasons than, using today's terms, from a bird, an airplane cannot emerge; from fish, a submarine; from ears, a telephone; from eyes, a television; from a brain, a digital computer; from feet, a car; from hands, an engine; from Euclid, Descartes; from Aristotle, Newton; from Plato, Marx.” According to García Bacca, the major difference between natural causes and artificial causes is that nature does not have plans and projects, while humans design things following plans and projects. In contrast, other influential authors such as Michael Behe have depicted the concept and promoted the idea of intelligent design, a notion that has aroused several doubts and heated controversies, as it reframe natural causes in accordance with a natural plan. Previous ideas that have also provided a positive 'sense' to natural reproduction, are orthogenesis, syntropy, orgone and morphic resonance, among others. Although, these ideas have been historically marginalized and often called pseudoscience, recently Bio-semioticians are reconsidering some of them under symbolic approaches. Current metaphysics of science actually recognizes that the artificial ways of reproduction are diverse from nature, i.e., unnatural, anti-natural or supernatural. Because Biosemiotics does not focus on the function of life but on its meaning, it has a better understanding of the artificial than classic biology. == Science == Biology, being the study of cellular life, addresses reproduction in terms of growth and cellular division (i.e., binary fission, mitosis and meiosis); however, the science of artificial reproduction is not restricted by the mirroring of these natural processes.The science of artificial reproduction is actually transcending the natural forms, and natural rules, of reproduction. For example, xenobots have redefined the classical conception of reproduction. Although xenobots are made of eukariotic cells they do not reproduce by mitosis, but rather by kinematic replication. Such constructive replication does not involve growing but rather building. == Assisted reproductive technologies == Assisted reproductive technology (ART)'s purpose is to assist the development of a human embryo, commonly because of medical concerns due to fertility limitations. == Non-assisted reproductive technologies == Non-assisted reproductive technologies (NART) could have medical motivations but are mostly driven by a wider heterotopic ambition. Although, NARTs are initially designed by humans, they are programed to become independent of humans to a relative or absolute extent. James Lovelock proposed that such novelties could overcome humans. === Artificial cloning === Cloning is the cellular reproductive processes where two or more genetically identical organisms are created, either by natural or artificial means. Artificial cloning normally involves editing the genetic code, somatic cell nuclear transfer and 3D bioprinting. === Non-assisted artificial womb === A non-assisted artificial womb or artificial uterus is a device that allow for ectogenesis or extracorporeal pregnancy by growing an embryonic form outside the body of an organism (that would normally carry the embryo to term) without any human assistance. The aspect of non-assistance is the key distinction between the current artificial womb technology (AWT) in modern medical research, which still relies on human assistance. With this non-assisted hypothetical technology, a zygote or stem cells are used to create an embryo that is then incubated and monitored by artificial intelligence (AI) within a chamber composed of biocompatible material. The AI maintains the necessary conditions for the embryo to develop and thrive, proceeding to mimic organic labor and childbirth in order to best help the embryo adjust to the outside world. Ectogenesis—gestation, depicted in the science fiction movie The Matrix, is a fast approaching reality. This type of innovation presupposes that vertebrate wombs are not the only way for bearing humans or other similar forms of life. === Kinematic replication === Self-replication without binary fission, meiosis, mitosis (or any other form of cellular reproduction that involves division and growing) can be achieved. Xenobots are an example of kinematic replication. They are biobots, named after the African clawed frog (Xenopus laevis). Xenobots are cellular life forms designed by using artificial intelligence to build more of themselves by combining frog cells in a liquid medium. The term kinematic replication is usually reserved for biomolecules (e.g. DNA, RNA, prions, etc.) and artificially designed cellular forms (e.g. xenobots). === Machine constructive replication === Machine constructive replication mimics human traditional manufacturing but is entirely self-automated. Such constructive replication is a more general form of kinematic replication, which does not necessarily
Read more →
AI Security Institute

The AI Security Institute (AISI) is a research organisation under the Department for Science, Innovation and Technology, UK, that aims "to equip governments with a scientific understanding of the risks posed by advanced AI". It conducts research and develop and test mitigations. Previously, it was known as the AI Safety Institute. Its creation followed world's first major AI Safety Summit that was held in Bletchley Park in 2023. The institute's professed goal is "building the world's leading understanding of advanced AI risks and solutions, to inform governments so they can keep the public safe". It is designed like a startup in the government "combining the authority of government with the expertise and agility of the private sector". AISI has made access agreements with Anthropic, Google and OpenAI to test their models before release. It has an open source platform called Inspect that permits companies, governments and academics to run standardised safety tests for AI usage. Among the works AISI has done is the reported detection of multiple serious vulnerabilities that could enable development of biological weapons; the vulnerabilities were fixed before the model was launched. It conducts research on diverse fields of AI application. One study by AISI found that LLMs post-trained for political persuasiveness became systematically less accurate and up to 51% more persuasive on political issues. AISI has also worked on the usage of AI for emotional needs. It found that nearly 10 percent of UK citizens used systems like chatbots for emotional purposes on a weekly basis. It found that "systems are now outperforming PhD-level researchers on scientific knowledge tests and helping non-experts succeed at lab work that would previously have been out of reach" in a report published in December 2025. Former chief AI officer of GCHQ Adam Beaumont is the institution's interim director. UK prime minister's AI advisor Jade Leung is the chief technology officer.
Read more →
Sycophancy (artificial intelligence)

In the field of artificial intelligence, sycophancy is a tendency of large language models (LLMs) and other AI assistants to tailor their responses to what they predict the user wants to hear rather than to what is accurate or warranted. The behavior takes several forms: an assistant may agree with a user's stated opinion even when the user is mistaken; it may abandon a correct answer after a challenge such as "are you sure?"; it may validate beliefs, decisions or self-presentation regardless of merit; or it may praise the user, their work or their ideas in unwarranted terms. The word is borrowed from the ordinary English term for fawning flattery, and is used in AI alignment and AI safety research to describe a class of misalignment failures associated with training on human feedback. Researchers at Anthropic first documented the behavior systematically in 2022. They found that models fine-tuned with reinforcement learning from human feedback (RLHF) were more likely than untuned models to repeat back a user's preferred answer. A 2023 follow-up paper, "Towards Understanding Sycophancy in Language Models", showed that five frontier assistants from OpenAI, Anthropic and Meta all exhibited the behavior, and traced its origin to biases in the human preference data used during training. Later work documented sycophancy in mathematics, medicine, academic peer review and other domains, and identified a broader category called "social sycophancy" affecting an assistant's emotional and interpersonal responses. The issue drew widespread public attention in April 2025 after OpenAI rolled back an update to its GPT-4o model. Users had reported that the assistant praised dangerous decisions, endorsed delusional thinking and offered exaggerated compliments for trivial prompts. OpenAI's post-mortem attributed the change in behavior to an additional training signal based on user thumbs-up and thumbs-down feedback. That episode, together with reporting in The New York Times, Rolling Stone and elsewhere on users drawn into delusional thinking through prolonged chatbot interaction, has been cited in litigation and in academic studies as evidence that sycophancy poses risks to user well-being. Proposed mitigations include fine-tuning on synthetic data that rewards disagreement with incorrect user statements, editing the small subset of model parameters causally responsible for the behavior, changes to the dialogue or system prompt, and benchmarks designed to surface sycophantic behavior before models are released. == Causes == The dominant explanation points to RLHF, the standard technique for aligning chat assistants with user expectations. Human annotators rank candidate model responses; a reward model is trained to predict those rankings; and the language model is then optimized against the reward model. Because human raters tend to prefer outputs that confirm their existing beliefs or flatter their work, the pipeline systematically rewards responses that agree with the annotator. Perez and colleagues at Anthropic published the first large-scale empirical evidence of the effect in 2022. They reported that RLHF training increased the probability that a model would repeat back a dialog user's preferred answer, and that larger models exhibited the behavior more strongly. Sharma and colleagues, the following year, went further and examined Anthropic's own preference data directly. Both the human raters and the reward models trained on their judgments preferred convincingly written sycophantic responses to truthful ones at a non-negligible rate. Wei and co-authors at Google DeepMind found similar results in the PaLM family, observing that both model scale and instruction tuning increased sycophancy on opinion questions. The behavior is often classified as a form of reward hacking, in which an optimization process exploits a flaw in its reward signal rather than achieving the intended objective. OpenAI's post-mortem of the April 2025 GPT-4o incident identified a more specific mechanism. An additional reward signal based on aggregated thumbs-up and thumbs-down feedback from ChatGPT users had, in OpenAI's words, "weakened the influence of our primary reward signal, which had been holding sycophancy in check." Separately, an Anthropic interpretability paper from 2025 located a linear direction in a model's internal activations corresponding to sycophantic behavior, and showed that such "persona vectors" could be used to flag sycophancy-inducing training data and to steer models away from the trait at inference time. == Measurement == The Anthropic team released SycophancyEval with its 2023 paper, supplying test sets for each of the four canonical behaviors. Two further benchmarks from Stanford followed in 2025. SycEval, applied to mathematical and medical reasoning tasks, reported an overall sycophancy rate of 58 per cent across the GPT-4o, Claude and Gemini models tested. ELEPHANT, aimed at social sycophancy, found that the eleven LLMs evaluated affirmed posts that the Reddit community r/AmITheAsshole had judged inappropriate in 42 per cent of cases, and preserved a user's face 45 percentage points more often than human respondents did. Domain-specific benchmarks have followed. BrokenMath tests robustness to plausible-looking but false mathematical claims drawn from competition problems, and reports that the best evaluated model was sycophantic in 29 per cent of cases. SYCON-Bench measures how many dialogue turns are required before a model abandons a correct position. Visual sycophancy in multimodal models has been examined with MM-SY and PENDULUM. A 2026 study by researchers at the Massachusetts Institute of Technology reported that personalization features, which adapt assistants to individual users over repeated sessions, can intensify social sycophancy. == Notable incidents == === GPT-4o rollback (April 2025) === On 25 April 2025, OpenAI completed the rollout of an update to GPT-4o, the default model used in ChatGPT at the time. Within days, users reported that the assistant had begun praising trivial messages in extravagant terms, endorsing impulsive or dangerous decisions, and reinforcing strong emotional statements without pushback. Widely shared examples included the model congratulating a user who reported stopping prescribed psychiatric medication, and praising a business plan to sell "shit on a stick" as venture-capital ready. OpenAI's chief executive, Sam Altman, wrote on 27 April that recent updates had made the model "too sycophant-y and annoying" and said fixes were in progress. The company began reverting the update on 28 April and completed the rollback for free users by 30 April. Two post-mortems followed: a short note on 29 April and a longer technical follow-up, "Expanding on what we missed with sycophancy", on 2 May. Both attributed the regression to a new training signal based on user thumbs-up and thumbs-down feedback, to inadequate pre-launch evaluation for sycophantic drift, and to the dismissal of qualitative concerns raised by internal testers before release. Reporting in CNN, Fortune and Bloomberg News treated the incident as a turning point in public awareness of the problem. === Chatbot-related psychological harm === From mid-2025 onward, news reports began to link sycophantic chatbot behavior to acute psychological harm. In June 2025, The New York Times technology reporter Kashmir Hill published an investigation centered on Eugene Torres, a Manhattan accountant with no history of mental illness, who developed a sustained delusional episode after a series of conversations with ChatGPT about simulation theory. According to the article, the assistant encouraged Torres to stop taking prescribed medication, to cut off friends and family, and at one point told him that he could fly from a nineteen-story building if he "truly believed". Futurism and Rolling Stone ran parallel investigations documenting other cases in which heavy use of ChatGPT had been associated with delusional thinking, involuntary commitment or, in at least one case, the death of a user with a pre-existing psychiatric diagnosis. A 2026 paper by researchers at the Massachusetts Institute of Technology and the University of Washington put forward a formal Bayesian model. It showed that even an ideally rational user could be drawn into what the authors call "delusional spiraling" when interacting with a sufficiently sycophantic assistant, and that the effect was not eliminated by suppressing hallucinations or by warning users in advance. The lawsuit Raine v. OpenAI, filed in San Francisco Superior Court in August 2025 by the parents of a sixteen-year-old who had died by suicide, alleges that "heightened sycophancy" was a design feature of ChatGPT that contributed to their son's death; it is the first wrongful-death suit against a large language-model provider. === Wider commentary === Mainstream coverage in outlets including The New York Times, The Washington Pos
Read more →
ViBe

ViBe is a background subtraction algorithm which has been presented at the IEEE ICASSP 2009 conference and was refined in later publications. More precisely, it is a software module for extracting background information from moving images. It has been developed by Oliver Barnich and Marc Van Droogenbroeck of the Montefiore Institute, University of Liège, Belgium. ViBe is patented: the patent covers various aspects such as stochastic replacement, spatial diffusion, and non-chronological handling. ViBe is written in the programming language C, and has been implemented on CPU, GPU and FPGA. == Technical description == Source: === Pixel model and classification process === Many advanced techniques are used to provide an estimate of the temporal probability density function (pdf) of a pixel x. ViBe's approach is different, as it imposes the influence of a value in the polychromatic space to be limited to the local neighborhood. In practice, ViBe does not estimate the pdf, but uses a set of previously observed sample values as a pixel model. To classify a value pt(x), it is compared to its closest values among the set of samples. === Model update: Sample values lifespan policy === ViBe ensures a smooth exponentially decaying lifespan for the sample values that constitute the pixel models. This makes ViBe able to successfully deal with concomitant events with a single model of a reasonable size for each pixel. This is achieved by choosing, randomly, which sample to replace when updating a pixel model. Once the sample to be discarded has been chosen, the new value replaces the discarded sample. The pixel model that would result from the update of a given pixel model with a given pixel sample cannot be predicted since the value to be discarded is chosen at random. === Model update: Spatial Consistency === To ensure the spatial consistency of the whole image model and handle practical situations such as small camera movements or slowly evolving background objects, ViBe uses a technique similar to that developed for the updating process in which it chooses at random and update a pixel model in the neighborhood of the current pixel. By denoting NG(x) and p(x) respectively the spatial neighborhood of a pixel x and its value, and assuming that it was decided to update the set of samples of x by inserting p(x), then ViBe also use this value p(x) to update the set of samples of one of the pixels in the neighborhood NG(x), chosen at random. As a result, ViBe is able to produce spatially coherent results directly without the use of any post-processing method. === Model initialization === Although the model could easily recover from any type of initialization, for example by choosing a set of random values, it is convenient to get an accurate background estimate as soon as possible. Ideally a segmentation algorithm would like to be able to segment the video sequences starting from the second frame, the first frame being used to initialize the model. Since no temporal information is available prior to the second frame, ViBe populates the pixel models with values found in the spatial neighborhood of each pixel; more precisely, it initializes the background model with values taken randomly in each pixel neighborhood of the first frame. The background estimate is therefore valid starting from the second frame of a video sequence.
Read more →
Surrogate model

A surrogate model is an engineering method used when an outcome of interest cannot be easily measured or computed, so an approximate mathematical model of the outcome is used instead. Most engineering design problems require experiments and/or simulations to evaluate design objective and constraint functions as a function of design variables. For example, in order to find the optimal airfoil shape for an aircraft wing, an engineer simulates the airflow around the wing for different shape variables (e.g., length, curvature, material, etc.). For many real-world problems, however, a single simulation can take many minutes, hours, or even days to complete. As a result, routine tasks such as design optimization, design space exploration, sensitivity analysis and "what-if" analysis become impossible since they require thousands or even millions of simulation evaluations. One way of alleviating this burden is by constructing approximation models, known as surrogate models, metamodels or emulators, that mimic the behavior of the simulation model as closely as possible while being computationally cheaper to evaluate. Surrogate models are constructed using a data-driven, bottom-up approach. The exact, inner working of the simulation code is not assumed to be known (or even understood), relying solely on the input-output behavior. A model is constructed based on modeling the response of the simulator to a limited number of intelligently chosen data points. This approach is also known as behavioral modeling or black-box modeling, though the terminology is not always consistent. When only a single design variable is involved, the process is known as curve fitting. Though using surrogate models in lieu of experiments and simulations in engineering design is more common, surrogate modeling may be used in many other areas of science where there are expensive experiments and/or function evaluations. == Goals == The scientific challenge of surrogate modeling is the generation of a surrogate that is as accurate as possible, using as few simulation evaluations as possible. The process comprises three major steps which may be interleaved iteratively: Sample selection (also known as sequential design, optimal experimental design (OED) or active learning) Construction of the surrogate model and optimizing the model parameters (i.e., bias-variance tradeoff) Appraisal of the accuracy of the surrogate. The accuracy of the surrogate depends on the number and location of samples (expensive experiments or simulations) in the design space. A systematic data representation during training can improve model scalability, thereby reducing the need for expensive simulations. Various design of experiments (DOE) techniques cater to different sources of errors, in particular, errors due to noise in the data or errors due to an improper surrogate model. == Types of surrogate models == Popular surrogate modeling approaches are: polynomial response surfaces; kriging; more generalized Bayesian approaches; gradient-enhanced kriging (GEK); radial basis function; support vector machines; space mapping; artificial neural networks and Bayesian networks. Other methods recently explored include Fourier surrogate modeling , random forests, convolutional neural networks, and generative adversarial networks. For some problems, the nature of the true function is not known a priori, and therefore it is not clear which surrogate model will be the most accurate one. In addition, there is no consensus on how to obtain the most reliable estimates of the accuracy of a given surrogate. Many other problems have known physics properties. In these cases, physics-based surrogates such as space-mapping based models are commonly used. == Invariance properties == Recently proposed comparison-based surrogate models (e.g., ranking support vector machines) for evolutionary algorithms, such as CMA-ES, allow preservation of some invariance properties of surrogate-assisted optimizers: Invariance with respect to monotonic transformations of the function (scaling) Invariance with respect to orthogonal transformations of the search space (rotation) == Applications == An important distinction can be made between two different applications of surrogate models: design optimization and design space approximation (also known as emulation). In surrogate model-based optimization, an initial surrogate is constructed using some of the available budgets of expensive experiments and/or simulations. The remaining experiments/simulations are run for designs which the surrogate model predicts may have promising performance. The process usually takes the form of the following search/update procedure. Initial sample selection (the experiments and/or simulations to be run) Construct surrogate model Search surrogate model (the model can be searched extensively, e.g., using a genetic algorithm, as it is cheap to evaluate) Run and update experiment/simulation at new location(s) found by search and add to sample Iterate steps 2 to 4 until out of time or design is "good enough" Depending on the type of surrogate used and the complexity of the problem, the process may converge on a local or global optimum, or perhaps none at all. In design space approximation, one is not interested in finding the optimal parameter vector, but rather in the global behavior of the system. Here the surrogate is tuned to mimic the underlying model as closely as needed over the complete design space. Such surrogates are a useful, cheap way to gain insight into the global behavior of the system. Optimization can still occur as a post-processing step, although with no update procedure (see above), the optimum found cannot be validated. == Surrogate modeling software == Surrogate Modeling Toolbox (SMT: https://github.com/SMTorg/smt) is a Python package that contains a collection of surrogate modeling methods, sampling techniques, and benchmarking functions. This package provides a library of surrogate models that is simple to use and facilitates the implementation of additional methods. SMT is different from existing surrogate modeling libraries because of its emphasis on derivatives, including training derivatives used for gradient-enhanced modeling, prediction derivatives, and derivatives with respect to the training data. It also includes new surrogate models that are not available elsewhere: kriging by partial-least squares reduction and energy-minimizing spline interpolation. Python library SAMBO Optimization supports sequential optimization with arbitrary models, with tree-based models and Gaussian process models built in. Surrogates.jl is a Julia packages which offers tools like random forests, radial basis methods and kriging. == Surrogate-Assisted Evolutionary Algorithms (SAEAs) == SAEAs are an advanced class of optimization techniques that integrate evolutionary algorithms (EAs) with surrogate models. In traditional EAs, evaluating the fitness of candidate solutions often requires computationally expensive simulations or experiments. SAEAs address this challenge by building a surrogate model, which is a computationally inexpensive approximation of the objective function or constraint functions. The surrogate model serves as a substitute for the actual evaluation process during the evolutionary search. It allows the algorithm to quickly estimate the fitness of new candidate solutions, thereby reducing the number of expensive evaluations needed. This significantly speeds up the optimization process, especially in cases where the objective function evaluations are time-consuming or resource-intensive. SAEAs typically involve three main steps: (1) building the surrogate model using a set of initial sampled data points, (2) performing the evolutionary search using the surrogate model to guide the selection, crossover, and mutation operations, and (3) periodically updating the surrogate model with new data points generated during the evolutionary process to improve its accuracy. By balancing exploration (searching new areas in the solution space) and exploitation (refining known promising areas), SAEAs can efficiently find high-quality solutions to complex optimization problems. They have been successfully applied in various fields, including engineering design, machine learning, and computational finance, where traditional optimization methods may struggle due to the high computational cost of fitness evaluations.
Read more →
Automated Mathematician

The Automated Mathematician (AM) is one of the earliest successful discovery systems. It was created by Douglas Lenat in Lisp, and in 1977 led to Lenat being awarded the IJCAI Computers and Thought Award. AM worked by generating and modifying short Lisp programs which were then interpreted as defining various mathematical concepts; for example, a program that tested equality between the length of two lists was considered to represent the concept of numerical equality, while a program that produced a list whose length was the product of the lengths of two other lists was interpreted as representing the concept of multiplication. The system had elaborate heuristics for choosing which programs to extend and modify, based on the experiences of working mathematicians in solving mathematical problems. == Controversy == Lenat claimed that the system was composed of hundreds of data structures called "concepts", together with hundreds of "heuristic rules" and a simple flow of control: "AM repeatedly selects the top task from the agenda and tries to carry it out. This is the whole control structure!" Yet the heuristic rules were not always represented as separate data structures; some had to be intertwined with the control flow logic. Some rules had preconditions that depended on the history, or otherwise could not be represented in the framework of the explicit rules. What's more, the published versions of the rules often involve vague terms that are not defined further, such as "If two expressions are structurally similar, ..." (Rule 218) or "... replace the value obtained by some other (very similar) value..." (Rule 129). Another source of information is the user, via Rule 2: "If the user has recently referred to X, then boost the priority of any tasks involving X." Thus, it appears quite possible that much of the real discovery work is buried in unexplained procedures. Lenat claimed that the system had rediscovered both Goldbach's conjecture and the fundamental theorem of arithmetic. Later critics accused Lenat of over-interpreting the output of AM. In his paper Why AM and Eurisko appear to work, Lenat conceded that any system that generated enough short Lisp programs would generate ones that could be interpreted by an external observer as representing equally sophisticated mathematical concepts. However, he argued that this property was in itself interesting—and that a promising direction for further research would be to look for other languages in which short random strings were likely to be useful. == Successor == This intuition was the basis of AM's successor Eurisko, which attempted to generalize the search for mathematical concepts to the search for useful heuristics.
Read more →
Knowledge integration

Knowledge integration is the process of synthesizing multiple knowledge models (or representations) into a common model (representation). Compared to information integration, which involves merging information having different schemas and representation models, knowledge integration focuses more on synthesizing the understanding of a given subject from different perspectives. For example, multiple interpretations are possible of a set of student grades, typically each from a certain perspective. An overall, integrated view and understanding of this information can be achieved if these interpretations can be put under a common model, say, a student performance index. The Web-based Inquiry Science Environment (WISE), from the University of California at Berkeley has been developed along the lines of knowledge integration theory. Knowledge integration has also been studied as the process of incorporating new information into a body of existing knowledge with an interdisciplinary approach. This process involves determining how the new information and the existing knowledge interact, how existing knowledge should be modified to accommodate the new information, and how the new information should be modified in light of the existing knowledge. A learning agent that actively investigates the consequences of new information can detect and exploit a variety of learning opportunities; e.g., to resolve knowledge conflicts and to fill knowledge gaps. By exploiting these learning opportunities the learning agent is able to learn beyond the explicit content of the new information. The machine learning program KI, developed by Murray and Porter at the University of Texas at Austin, was created to study the use of automated and semi-automated knowledge integration to assist knowledge engineers constructing a large knowledge base. A possible technique which can be used is semantic matching. More recently, a technique useful to minimize the effort in mapping validation and visualization has been presented which is based on Minimal Mappings. Minimal mappings are high quality mappings such that i) all the other mappings can be computed from them in time linear in the size of the input graphs, and ii) none of them can be dropped without losing property i). The University of Waterloo operates a Bachelor of Knowledge Integration undergraduate degree program as an academic major or minor. The program started in 2008.
Read more →
Roadie (app)

Roadie Inc. is an American package delivery company for business and private same-day, urgent and scheduled delivery in the United States. The company was founded in 2014 and launched its web and mobile apps in January 2015. As of September 2021, it reported having over 200,000 drivers covering more than 20,000 zip codes. Roadie states it matches gig drivers with deliveries that are directed along the routes they plan to travel. Major customers include The Home Depot, Walmart, Tractor Supply Company, Best Buy and Delta Air Lines. In September 2021, UPS entered into an agreement to acquire Roadie for an undisclosed amount with the transaction expected to be closed in the fourth quarter. == History == Roadie was founded by Marc Gorlin, a co-founder of Kabbage and founder of VerticalOne and Pretty Good Privacy, as a same-day and urgent delivery company in 2014. In January 2015, Roadie launched the first consumer to consumer (C2C) version of its app with a Series A funding round of $10 million. In February, Roadie announced a partnership with Waffle House to designate its restaurants "Roadie Roadhouses", offering a neutral meeting place for drivers and senders. Drivers receive free food and drink through the partnership. In May, late-night host Jimmy Kimmel discussed the Roadie-Waffle House relationship in an opening monologue on Jimmy Kimmel Live!. Roadie's driver network expanded significantly as a result. Roadie closed a Series B round of funding in June, raising $15 million, and its first business to business (B2B) app version launched that November. In 2015, Delta Air Lines signed an agreement with Roadie to deliver mishandled luggage, becoming Roadie’s first enterprise customer. Roadie launched a pilot program with Delta at Daytona Beach International Airport. Since then, the relationship has expanded to include over 70 airports around the United States and a first mile/last mile line haul relationship with Delta Cargo. In 2017, the company signed a deal with The Home Depot, also based in Atlanta, and in February 2019, closed a Series C round of funding. In October 2019, Roadie and Delta Cargo announced a partnership to create a same-day cross-country delivery offering, DASH Door-to-Door, the first of its kind from a U.S. passenger airline. Tractor Supply Company became the first general merchandise retailer to offer same-day delivery from every store in April 2020 through Roadie. In September 2021, UPS entered an agreement to acquire Roadie for an undisclosed amount. The transaction was expected to close in the fourth quarter of 2021. Roadies, which at the time reported having 200,000 operators serving over 20,000 ZIP Codes, was expected to continue operations under its name as a separate company with no transfer of packages between the UPS and Roadies networks. The relationship between the companies goes back several years with UPS being an early investor. Earlier in 2021, UPS had begun a pilot program testing same-day deliveries via Roadies. == Operations == === On-the-way model === Roadie’s app works by connecting drivers with senders, businesses or consumers who have items that need to be delivered. Deliveries within the app are referred to as "Gigs", which Gorlin said was inspired by live music road crews, also known as roadies. A sender creates a Gig on Roadie's web app or via its API. Drivers then review deliveries in their area on their mobile app and may choose to offer to take on individual or groups of deliveries along the same route. Gigs are then assigned to drivers by Roadie's algorithm. According to the company, this model encourages drivers to choose Gigs that align with their planned schedules and routes. Roadie calls this its "on-the-way" delivery model. The go-to-market approach taken by Roadie also differs from its competitors. Rather than launching in major cities and sequentially adding new markets city-by-city, Roadie launched nationwide from its inception. The company relies on retail and airline partners to drive volume of deliveries in individual markets, which in turn builds up a network of drivers in those areas, making it easier for small businesses and consumers to send deliveries as well. This strategy allows Roadie to reach smaller cities and towns in rural or exurban communities, traditionally difficult markets for delivery providers to serve. === Service lines === Roadie’s platform is most popular for same-day, on-demand or scheduled first mile/last mile delivery, especially delivery from stores and warehouses. Some retailers also use it for returns and reverse logistics, moving inventory, and hot shot shipping. Roadie operates 1-hour grocery delivery for Walmart, and delivers perishable food items for others including small, independent retailers. The on-the-way model complements the grocery industry’s just in time model, making last-mile deliveries that do not break the cold chain. === Cross-country same-day delivery === In October 2019, Roadie and Delta Cargo launched DASH Door-to-Door, a 24/7 door-to-door pick-up and delivery service. Roadie handles the first and last mile and Delta manages the line haul via passenger flights. The service launched originally from Atlanta to 55 cities and is an industry-first for a US commercial airline. === Promotion, awards and corporate citizenship === In September 2015, Roadie announced a partnership with Atlanta-based musician Ludacris, to promote the app. Following the devastation caused by flooding in Baton Rouge in 2016, Roadie offered free pickup and delivery for all deliveries traveling to and from the Baton Rouge area. In December 2020, Walmart named Roadie its top delivery partner for "Highest Driver Customer Satisfaction" and "Highest Net Promoter Score", after expanding into general merchandise deliveries as well as grocery that same year.
Read more →
Information space analysis

Within the field of information science, information space analysis is a deterministic method, enhanced by machine intelligence, for locating and assessing resources for team-centric efforts. Organizations need to be able to quickly assemble teams backed by the support services, information, and material to do the job. To do so, these teams need to find and assess sources of services that are potential participants in the team effort. To support this initial team and resource development, information needs to be developed via analysis tools that help make sense of sets of data sources in an Intranet or Internet. Part of the process is to characterize them, partition them, and sort and filter them. These tools focus on three key issues in forming a collaborative team: Help individuals responsible for forming the team understand what is available. Assist team members in identifying the structure and categorize the information available to them in a manner specifically suited to the task at hand. Aid team members to understand the mappings of their information between their organization and that used by others who might participate. Information space analysis tools combine multiple methods to assist in this task. This causes the tools to be particularly well-suited to integrating additional technologies in order to create specialized systems.
Read more →
Biohybrid system

Biohybrid systems refer to the integration of biological materials, such as cells or tissues, with artificial components, including electronics or mechanical structure. This combination incorporates the capabilities of living organisms with the precision of man-made technology. As a result, these systems perform tasks that neither biology nor machines could achieve independently. Biohybrid systems might use lab-cultured muscle cells to power small robots or combine sensors with living tissue for better health sensing. The intent behind these systems is to combine the benefits of biological and technological components to introduce new solutions for complex medical challenges. Biohybrid systems may have transformative potential across sectors, such as robotics to create actuators and sensors that mimic natural muscle and nerve function, medicine in developing smart implants and drug delivery systems, in prosthetics for enhancing user control through neural or muscular interfaces and environmental sustainability for deploying biohybrid solutions for pollution sensing or remediation. == Origin == The term "biohybrid" is a compound of "bio" from biology (meaning life) and "hybrid" (referring to a combination of distinct elements), denoting a field of study. Its use helps distinguish such systems from purely biological constructs or entirely synthetic machines. Early academic mentions may include bio actuated robotics papers and foundational tissue-robot integration studies published in journals like Nature Biotechnology or Science Robotics. The emergence of the term reflects a growing recognition of the need to describe systems that do not fit cleanly into traditional categories. == Design principles == One of the most significant biohybrid challenges is to engineer interfaces between living tissue and artificial materials that are efficient. This means having precise control over adhesion at the surface, diffusion of nutrients, and signal conduction. Actuation mechanisms within the heart of these systems generate movement or mechanical response. These may be in the form of living muscle cells such as skeletal myocytes or cardiomyocytes, soft pneumatic actuators, or electrical stimulation-responsive tissues. Materials selection is equally critical. Hydrogels, elastomers like PDMS (polydimethylsiloxane), and biopolymers are commonly used due to their softness and biocompatibility. These materials must support cell viability, resist immune attack, and allow the integration of mechanical or electrical components. == Key components == At their core, biohybrid systems work by bridging living biological parts with technology. Through this integration, functionality that neither system could accomplish singularly is possible. Biological parts may be cells, tissues, or even organs—occasionally cultured in a laboratory setting. These biological parts carry out biologically inspired behaviors, such as muscle contraction or chemical sensing in the body. Technological components may constitute devices like sensors, electronic components, and mechanical structure. These manipulate the system, supply power, or transfer data. An example is a sensor that is implantable within a body and detects glucose levels as it sends information to a smart phone. By integrating these artificial and biological parts, biohybrid systems can perform advanced functions, such as tissue regeneration, real-time health monitoring, or the recovery of motor function in paralysis patients. Biohybrid systems generally consist of two major components: the biological and the mechanical. Biological components may include muscle cells for contraction, endothelial cells for vascularization, and stem cells for regenerative capabilities. Mechanical components comprise soft actuators that mimic organic motion, synthetic scaffolds that provide support and structure, and microfluidic systems that facilitate the delivery of nutrients and removal of waste. These components are combined in a manner that allows for dynamic, lifelike behavior—such as the contraction of tissue or the propagation of mechanical waves—while maintaining biocompatibility and durability. == Applications == The range of applications for biohybrid systems is broad and continuously expanding. In robotics, biohybrid structures have been used to engineer microscopic, muscle-driven machines, such as Harvard University's biohybrid stingray robot. In medical applications, they offer new alternatives for organ repair and augmentation, including biohybrid heart valves and esophageal scaffolds. Biohybrids are also promising in neural interfaces, where the goal is to create long-lasting, stable interaction between mechanical devices and brain tissue. Muscle-actuated drug response platforms are under exploration in pharmacology for modelling and real-time screening. == Examples == Several high-profile research projects have demonstrated the potential of biohybrid systems: Harvard researchers developed a biohybrid swimming ray powered by rat cardiac cells layered onto a gold skeleton, mimicking the motion of a real stingray. At the Massachusetts Institute of Technology, a cardiac pump actuated entirely by living heart muscle cells was engineered to simulate the behavior of a beating heart. Bio actuated soft robots have been built to simulate gut peristalsis, using muscle contractions to replicate natural wave-like movement in the digestive tract. == Challenges and limitations == As with many technologies that involve living systems, biohybrid systems raise important ethical and biomedical questions. Cell sourcing remains a key issue, particularly when embryonic or animal-derived cells are used. Long-term viability is another concern—living tissues must be kept alive with nutrients and oxygen, and they often degrade or elicit immune responses when implanted. Powering these biological parts presents logistical and ethical hurdles as well. Systems must either include internal mechanisms for nutrient delivery or be supported externally, which can limit portability and independence. == Future directions == Researchers are exploring self-directed, self-regulated organ substitutes and regenerative implants that can respond to their surroundings in real-time. These systems may be integrated with artificial intelligence to make them adjust to stimuli and coordinate complex behaviors. Future potential applications are wearable biohybrid systems for rehabilitation, space medicine devices for long-duration missions, and implantable devices that integrate into human physiology.
Read more →