AI App Q

AI App Q — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Pill reminder

    Pill reminder

    A pill reminder is any device that reminds users to take medications. Traditional pill reminders are pill containers with electric timers attached, which can be preset for certain times of the day to set off an alarm. More sophisticated pill reminders can also detect when they have been opened, and therefore when the user is away during the time they were supposed to take their medication, they will be reminded of it when they return. This reminder can be in the form of a light, which also helps for deaf or hearing-impaired users. == Mobile app == A newer type of pill reminder is a mobile app that reminds the owner to take the medication. Some of these applications might effectively support adherence to taking medications.

    Read more →
  • Thermal attack

    Thermal attack

    A thermal attack (aka thermal imaging attack) is an approach that exploits heat traces to uncover the entered credentials. These attacks rely on the phenomenon of heat transfer from one object to another. During authentication, heat transfers from the users' hands to the surface they are interacting with, leaving heat traces behind that can be analyzed using thermal cameras that operate in the far-infrared spectrum. These traces can be recovered and used to reconstruct the passwords. In some cases, the attack can be successful even 30 seconds after the user has authenticated. Thermal attacks can be performed after the victim had authenticated, alleviating the need for in-situ observation attacks (e.g., shoulder surfing attacks) that can be affected by hand occlusions. While smudge attacks can reveal the order of entries of graphical passwords, such as the Android Lock Patterns, thermal attacks can reveal the order of entries even in the case of PINs or alphanumeric passwords. The reason thermal attacks leak information about the order of entry is because keys and buttons that the user touches first lose heat over time, while recently touched ones maintain the heat signature for a longer time. This results in distinguishable heat patterns that can tell the attacker which entry was entered first. Thermal attacks were shown to be effective against plastic keypads, such as the ones used to enter credit card's PINs in supermarkets and restaurants, and on handheld mobile devices such as smartphones and tablets. In their paper published at the Conference on Human Factors in Computing Systems (CHI 2017), Abdelrahman et al. showed that the attack is feasible on today's smartphones. They also proposed some ways to mitigate the attack, such as swiping randomly on the screen to distort the heat traces, or forcing maximum CPU usage for a few seconds. Thermal attacks can also infer passwords from heat traces on keyboards. Researchers at the University of Glasgow showed that attackers who use AI methods can be more effective in performing thermal attacks. Their study presents a new tool called ThermoSecure and evaluates it in two user studies. The results show that ThermoSecure can successfully attack passwords with an average accuracy of 92% to 55%, depending on the length of the password. The effectiveness of thermal attacks also depends on typing behavior and the material of the keycaps. ABS keycaps, which retain heat traces longer, are more vulnerable to thermal attacks. The study also discusses ways to protect against thermal attacks and presents seven potential mitigation approaches. Dr Khamis, who led the development of the technology with Norah Alotaibi and John Williamson, said with thermal imaging cameras more affordable than ever and machine learning becoming more accessible, it was "very likely that people around the world are developing systems along similar lines to ThermoSecure in order to steal passwords". == Thermal Attack Mitigation == === Simple and Practical Measures === One basic and effective way to mitigate thermal attacks is to deliberately create heat noise over the input interface, such as a keypad or keyboard, after entering a password. For instance, placing one's palm over the entire interface for a few seconds after use can obscure the thermal pattern left by the fingers, making it much more difficult for an unauthorized user to interpret the heat traces. === Range of Proposed Strategies === In addition to simple methods, researchers have developed a spectrum of mitigation strategies to counter thermal attacks. These strategies encompass 15 different approaches including: Use of Biometrics: Replacing traditional pin codes or passwords with biometric authentication, such as fingerprint recognition or facial recognition, eliminates the issue of residual heat on keypads. Heating the Interface: Implementing technology to slightly warm up the keypad can effectively neutralize the heat traces left by fingers, preventing thermal cameras from capturing the pattern. Randomizing Key Layouts: Employing dynamic key layouts that change positions every time the interface is used, making it impossible to correlate heat patterns with static input positions. === Technological Intervention on Thermal Cameras === Another avenue for mitigation is to address the issue at the source by modifying thermal cameras. Proposals have been made to develop thermal cameras that can automatically detect vulnerable interfaces such as keyboards or keypads. When these interfaces are detected within the camera's field of view, the camera would be programmed to prevent the user from recording images of them. This solution, however, would require widespread adoption by thermal camera manufacturers. Additionally, the approach is particularly viable for thermal cameras connected to a computing device, such as a smartphone, which can process the images in real time. Many affordable thermal cameras are standalone and do not have connectivity or processing capabilities. However, thermal cameras designed for connection to mobile devices can utilize the smartphone's processing power, making this mitigation approach feasible for such devices.

    Read more →
  • Outline of databases

    Outline of databases

    The following is provided as an overview of and topical guide to databases: Database – organized collection of data, today typically in digital form. The data are typically organized to model relevant aspects of reality (for example, the availability of rooms in hotels), in a way that supports processes requiring this information (for example, finding a hotel with vacancies). == What type of things are databases? == Databases can be described as all of the following: Information – sequence of symbols that can be interpreted as a message. Information can be recorded as signs, or transmitted as signals. Data – values of qualitative or quantitative variables, belonging to a set of items. Data in computing (or data processing) are often represented by a combination of items organized in rows and multiple variables organized in columns. Data are typically the results of measurements and can be visualised using graphs or images. Computer data – information in a form suitable for use with a computer. Data is often distinguished from programs. A program is a sequence of instructions that detail a task for the computer to perform. In this sense, data is everything in software that is not program code. == Types of databases == Active database – Database with event driven features Animation database – Database for storing and reusing animation fragments or motion capture data Back-end database – Organized collection of data in computingPages displaying short descriptions of redirect targets Bibliographic database – database of bibliographic records, an organized digital collection of references to published literature, including journal and newspaper articles, conference proceedings, reports, government and legal publications, patents, books, etc. Centralized database – database located and maintained in one location, unlike a distributed database. Cloud database – Database running on a cloud computing platform Collection database – collection catalog of a museum or archive implemented using a computerized database, in which the institution's objects or material are catalogued. Collective Optimization Database – open repository to enable sharing of benchmarks, data sets and optimization cases from the community, provide web services and Plug-in (computing)|plugins to analyze optimization data and predict program transformations or better hardware designs for multi-objective optimizations based on statistical and machine learning techniques provided there is enough information collected in the repository from multiple users. Configuration management database – Database used to store info on hardware and software assets Cooperative database – holds information on customers and their transactions. Current database – conventional database that stores data that is valid now. Directory – repository or database of information which is optimized for reading, under the assumption that data updates are very rare compared to data reads. Commonly, a directory supports search and browsing in addition to simple lookups. Distributed database – database in which storage devices are not all attached to a common CPU. Document-oriented database – computer program designed for storing, retrieving, and managing document-oriented, or Semi-structured model|semi structured data, information. EDA database – database specialized for the purpose of electronic design automation. Endgame tablebase – computerized database that contains precalculated exhaustive analysis of a chess endgame position. Food composition database (FCDB) – provides detailed information on the nutritional composition of foods. Full-text database – database that contains the complete text of books, dissertations, journals, magazines, newspapers or other kinds of textual documents. Also called a "complete-text database". Government database – collects personal information for various reasons (mass surveillance, Schengen Information System in the European Union, social security, statistics, etc.). Graph database – uses graph structures with nodes, edges, and properties to represent and store data. Knowledge base – special kind of database for knowledge management. A knowledge base provides a means for information to be collected, organised, shared, searched and utilised. Mobile database – can be connected to by a mobile computing device over a mobile network. Navigational database – database in which objects (or records) in it are found primarily by following references from other objects. Non-native speech database – speech database of non-native pronunciations of English. Online database – database accessible from a network, including from the Internet. Operational database – accessed by an Operational System to carry out regular operations of an organization. Parallel database – improves performance through parallelization of various operations, such as loading data, building indexes and evaluating queries. Probabilistic database – uncertain database in which the possible worlds have associated probabilities. Real-time database – processing system designed to handle workloads whose state is constantly changing (Buchmann). Relational database – collection of data items organized as a set of formally described tables from which data can be accessed easily. Spatial database – database that is optimized to store and query data that is related to objects in space, including points, lines and polygons. Temporal database – database with built-in time aspects, for example a temporal data model and a temporal version of Structured Query Language (SQL). Time series database – a time series is an associative array of numbers indexed by a datetime or a datetime range. These time series are often called profiles or curves, depending upon the market. A time series of stock prices might be called a price curve, or a time series of energy consumption might be called a load profile. Despite the disparate naming, the operations performed on them are sufficiently common as to demand special database treatment. Triplestore – purpose-built database for the storage and retrieval of triples, a triple being a data entity composed of subject-predicate-object, like "Bob is 35" or "Bob knows Fred". Very large database (VLDB) – contains an extremely high number of tuples (database rows), or occupies an extremely large physical filesystem storage space. Vulnerability database – platform aimed at collecting, maintaining, and disseminating information about discovered vulnerabilities targeting real computer systems. XLDB – Stands for "eXtremely Large Data Base". XML database – data stored in XML format, where it can be queried, exported and serialized into the desired format. == History of databases == History of databases – History of database management systems –: == Database use == Database usage requirements – Database theory – encapsulates a broad range of topics related to the study and research of the theoretical realm of databases and database management systems. Database machine – or is a computer or special hardware that stores and retrieves data from a database. Also called a "back end processor" Database server – computer program that provides database services to other computer programs or computers, as defined by the client-server model. Database application – computer program whose primary purpose is entering and retrieving information from a computer-managed database. Database management system (DBMS) – software package with computer programs that control the creation, maintenance, and use of a database. Database connection – facility in computer science that allows client software to communicate with database server software, whether on the same machine or not. Datasource – name given to the connection set up to a database from a server. The name is commonly used when creating a query to the database. The Database Source Name (DSN) does not have to be the same as the filename for the database. For example, a database file named "friends.mdb" could be set up with a DSN of "school". Then DSN "school" would then be used to refer to the database when performing a query. Data Source Name (DSN) – are data structures used to describe a connection to a data source. Sometimes known as a database source name though data sources are not limited to databases. Database administrator (DBA) – is a person responsible for the installation, configuration, upgrade, administration, monitoring and maintenance of physical databases. Lock – Comparison of database tools – (provides tables for comparing general and technical information for a number of available database administrator tools.) Database-centric architecture – software architectures in which databases play a crucial role. Also called "data-centric architecture". Intelligent database – was put forward as a system that manages information (rather than data) in a way that appears natural to users and which goes beyond simple record keeping. Two-phase locking (2PL) – is a

    Read more →
  • Computer Graphics: Principles and Practice

    Computer Graphics: Principles and Practice

    Computer Graphics: Principles and Practice is a textbook written by James D. Foley, Andries van Dam, Steven K. Feiner, John Hughes, Morgan McGuire, David F. Sklar, and Kurt Akeley and published by Addison–Wesley. First published in 1982 as Fundamentals of Interactive Computer Graphics, it is widely considered a classic standard reference book on the topic of computer graphics. It is sometimes known as the bible of computer graphics (due to its size). == Editions == === First Edition === The first edition, published in 1982 and titled Fundamentals of Interactive Computer Graphics, discussed the SGP library, which was based on ACM's SIGGRAPH CORE 1979 graphics standard, and focused on 2D vector graphics. === Second Edition === The second edition, published 1990, was completely rewritten and covered 2D and 3D raster and vector graphics, user interfaces, geometric modeling, anti-aliasing, advanced rendering algorithms and an introduction to animation. The SGP library was replaced by SRGP (Simple Raster Graphics Package), a library for 2D raster primitives and interaction handling, and SPHIGS (Simple PHIGS), a library for 3D primitives, which were specifically written for the book. === Second Edition in C === In the second edition in C, published in 1995, all examples were converted from Pascal to C. New implementations for the SRGP and SPHIGS graphics packages in C were also provided. === Third Edition === A third edition covering modern GPU architecture was released in July 2013. Examples in the third edition are written in C++, C#, WPF, GLSL, OpenGL, G3D, or pseudocode. == Awards == The book has won a Front Line Award (Hall of Fame) in 1998.

    Read more →
  • Argumentation framework

    Argumentation framework

    In artificial intelligence and related fields, an argumentation framework is a way to deal with contentious information and draw conclusions from it using formalized arguments. In an abstract argumentation framework, entry-level information is a set of abstract arguments that, for instance, represent data or a proposition. Conflicts between arguments are represented by a binary relation on the set of arguments. In concrete terms, an argumentation framework is represented with a directed graph such that the nodes are the arguments, and the arrows represent the attack relation. There exist some extensions of the Dung's framework, like the logic-based argumentation frameworks or the value-based argumentation frameworks. == Abstract argumentation frameworks == === Formal framework === Abstract argumentation frameworks, also called argumentation frameworks à la Dung, are defined formally as a pair: A set of abstract elements called arguments, denoted A {\displaystyle A} A binary relation on A {\displaystyle A} , called attack relation, denoted R {\displaystyle R} For instance, the argumentation system S = ⟨ A , R ⟩ {\displaystyle S=\langle A,R\rangle } with A = { a , b , c , d } {\displaystyle A=\{a,b,c,d\}} and R = { ( a , b ) , ( b , c ) , ( d , c ) } {\displaystyle R=\{(a,b),(b,c),(d,c)\}} contains four arguments ( a , b , c {\displaystyle a,b,c} and d {\displaystyle d} ) and three attacks ( a {\displaystyle a} attacks b {\displaystyle b} , b {\displaystyle b} attacks c {\displaystyle c} and d {\displaystyle d} attacks c {\displaystyle c} ). Dung defines some notions : an argument a ∈ A {\displaystyle a\in A} is acceptable with respect to E ⊆ A {\displaystyle E\subseteq A} if and only if E {\displaystyle E} defends a {\displaystyle a} , that is ∀ b ∈ A {\displaystyle \forall b\in A} such that ( b , a ) ∈ R , ∃ c ∈ E {\displaystyle (b,a)\in R,\exists c\in E} such that ( c , b ) ∈ R {\displaystyle (c,b)\in R} , a set of arguments E {\displaystyle E} is conflict-free if there is no attack between its arguments, formally : ∀ a , b ∈ E , ( a , b ) ∉ R {\displaystyle \forall a,b\in E,(a,b)\not \in R} , a set of arguments E {\displaystyle E} is admissible if and only if it is conflict-free and all its arguments are acceptable with respect to E {\displaystyle E} . === Different semantics of acceptance === ==== Extensions ==== To decide if an argument can be accepted or not, or if several arguments can be accepted together, Dung defines several semantics of acceptance that allows, given an argumentation system, sets of arguments (called extensions) to be computed. For instance, given S = ⟨ A , R ⟩ {\displaystyle S=\langle A,R\rangle } , E {\displaystyle E} is a complete extension of S {\displaystyle S} only if it is an admissible set and every acceptable argument with respect to E {\displaystyle E} belongs to E {\displaystyle E} , E {\displaystyle E} is a preferred extension of S {\displaystyle S} only if it is a maximal element (with respect to the set-theoretical inclusion) among the admissible sets with respect to S {\displaystyle S} , E {\displaystyle E} is a stable extension of S {\displaystyle S} only if it is a conflict-free set that attacks every argument that does not belong in E {\displaystyle E} (formally, ∀ a ∈ A ∖ E , ∃ b ∈ E {\displaystyle \forall a\in A\backslash E,\exists b\in E} such that ( b , a ) ∈ R {\displaystyle (b,a)\in R} , E {\displaystyle E} is the (unique) grounded extension of S {\displaystyle S} only if it is the smallest element (with respect to set inclusion) among the complete extensions of S {\displaystyle S} . There exists some inclusions between the sets of extensions built with these semantics : Every stable extension is preferred, Every preferred extension is complete, The grounded extension is complete, If the system is well-founded (there exists no infinite sequence a 0 , a 1 , … , a n , … {\displaystyle a_{0},a_{1},\dots ,a_{n},\dots } such that ∀ i > 0 , ( a i + 1 , a i ) ∈ R {\displaystyle \forall i>0,(a_{i+1},a_{i})\in R} ), all these semantics coincide—only one extension is grounded, stable, preferred, and complete. Some other semantics have been defined. One introduce the notation E x t σ ( S ) {\displaystyle Ext_{\sigma }(S)} to note the set of σ {\displaystyle \sigma } -extensions of the system S {\displaystyle S} . In the case of the system S {\displaystyle S} in the figure above, E x t σ ( S ) = { { a , d } } {\displaystyle Ext_{\sigma }(S)=\{\{a,d\}\}} for every Dung's semantic—the system is well-founded. That explains why the semantics coincide, and the accepted arguments are: a {\displaystyle a} and d {\displaystyle d} . ==== Labellings ==== Labellings are a more expressive way than extensions to express the acceptance of the arguments. Concretely, a labelling is a mapping that associates every argument with a label in (the argument is accepted), out (the argument is rejected), or undec (the argument is undefined—not accepted or refused). One can also note a labelling as a set of pairs ( a r g u m e n t , l a b e l ) {\displaystyle ({\mathit {argument}},{\mathit {label}})} . Such a mapping does not make sense without additional constraint. The notion of reinstatement labelling guarantees the sense of the mapping. L {\displaystyle L} is a reinstatement labelling on the system S = ⟨ A , R ⟩ {\displaystyle S=\langle A,R\rangle } if and only if : ∀ a ∈ A , L ( a ) = i n {\displaystyle \forall a\in A,L(a)={\mathit {in}}} if and only if ∀ b ∈ A {\displaystyle \forall b\in A} such that ( b , a ) ∈ R , L ( b ) = o u t {\displaystyle (b,a)\in R,L(b)={\mathit {out}}} ∀ a ∈ A , L ( a ) = o u t {\displaystyle \forall a\in A,L(a)={\mathit {out}}} if and only if ∃ b ∈ A {\displaystyle \exists b\in A} such that ( b , a ) ∈ R {\displaystyle (b,a)\in R} and L ( b ) = i n {\displaystyle L(b)={\mathit {in}}} ∀ a ∈ A , L ( a ) = u n d e c {\displaystyle \forall a\in A,L(a)={\mathit {undec}}} if and only if L ( a ) ≠ i n {\displaystyle L(a)\neq {\mathit {in}}} and L ( a ) ≠ o u t {\displaystyle L(a)\neq {\mathit {out}}} One can convert every extension into a reinstatement labelling: the arguments of the extension are in, those attacked by an argument of the extension are out, and the others are undec. Conversely, one can build an extension from a reinstatement labelling just by keeping the arguments in. Indeed, Caminada proved that the reinstatement labellings and the complete extensions can be mapped in a bijective way. Moreover, the other Datung's semantics can be associated to some particular sets of reinstatement labellings. Reinstatement labellings distinguish arguments not accepted because they are attacked by accepted arguments from undefined arguments—that is, those that are not defended cannot defend themselves. An argument is undec if it is attacked by at least another undec. If it is attacked only by arguments out, it must be in, and if it is attacked some argument in, then it is out. The unique reinstatement labelling that corresponds to the system S {\displaystyle S} above is L = { ( a , i n ) , ( b , o u t ) , ( c , o u t ) , ( d , i n ) } {\displaystyle L=\{(a,{\mathit {in}}),(b,{\mathit {out}}),(c,{\mathit {out}}),(d,{\mathit {in}})\}} . === Inference from an argumentation system === In the general case when several extensions are computed for a given semantic σ {\displaystyle \sigma } , the agent that reasons from the system can use several mechanisms to infer information: Credulous inference: the agent accepts an argument if it belongs to at least one of the σ {\displaystyle \sigma } -extensions—in which case, the agent risks accepting some arguments that are not acceptable together ( a {\displaystyle a} attacks b {\displaystyle b} , and a {\displaystyle a} and b {\displaystyle b} each belongs to an extension) Skeptical inference: the agent accepts an argument only if it belongs to every σ {\displaystyle \sigma } -extension. In this case, the agent risks deducing too little information (if the intersection of the extensions is empty or has a very small cardinal). For these two methods to infer information, one can identify the set of accepted arguments, respectively C r σ ( S ) {\displaystyle Cr_{\sigma }(S)} the set of the arguments credulously accepted under the semantic σ {\displaystyle \sigma } , and S c σ ( S ) {\displaystyle Sc_{\sigma }(S)} the set of arguments accepted skeptically under the semantic σ {\displaystyle \sigma } (the σ {\displaystyle \sigma } can be missed if there is no possible ambiguity about the semantic). Of course, when there is only one extension (for instance, when the system is well-founded), this problem is very simple: the agent accepts arguments of the unique extension and rejects others. The same reasoning can be done with labellings that correspond to the chosen semantic : an argument can be accepted if it is in for each labelling and refused if it is out for each labelling, the others being in an undecided state (the status of the arguments can remind the

    Read more →
  • Anderson's rule (computer science)

    Anderson's rule (computer science)

    In the field of computer security, Anderson's rule refers to a principle formulated by Ross J. Anderson: systems that handle sensitive personal information involve a trilemma of security, functionality, and scale, of which you can choose any two. A system that has information on many data subjects and to which many people require access is hard to secure unless its functionality is severely restricted. If it has rich functionality, you may have to restrict the number of people with access, or accept that some information will leak.

    Read more →
  • Texture compression

    Texture compression

    Texture compression is a specialized form of image compression designed for storing texture maps in 3D computer graphics rendering systems. Unlike conventional image compression algorithms, texture compression algorithms are optimized for random access. Texture compression can be applied to reduce memory usage at runtime. Texture data is often the largest source of memory usage in a mobile application. == Tradeoffs == In their seminal paper on texture compression, Beers, Agrawala and Chaddha list four features that tend to differentiate texture compression from other image compression techniques. These features are: Decoding Speed It is highly desirable to be able to render directly from the compressed texture data and so, in order not to impact rendering performance, decompression must be fast. Random Access Since predicting the order that a renderer accesses texels would be difficult, any texture compression scheme must allow fast random access to decompressed texture data. This tends to rule out many better-known image compression schemes such as JPEG or run-length encoding. Compression Rate and Visual Quality In a rendering system, lossy compression can be more tolerable than for other use cases. Some texture compression libraries, such as crunch, allow the developer to flexibly trade off compression rate vs. visual quality, using methods such as rate–distortion optimization (RDO). Encoding Speed Texture compression is more tolerant of asymmetric encoding/decoding rates as the encoding process is often done only once during the application authoring process. Given the above, most texture compression algorithms involve some form of fixed-rate lossy vector quantization of small fixed-size blocks of pixels into small fixed-size blocks of coding bits, sometimes with additional extra pre-processing and post-processing steps. Block Truncation Coding is a very simple example of this family of algorithms. Because their data access patterns are well-defined, texture decompression may be executed on-the-fly during rendering as part of the overall graphics pipeline, reducing overall bandwidth and storage needs throughout the graphics system. As well as texture maps, texture compression may also be used to encode other kinds of rendering map, including bump maps and surface normal maps. Texture compression may also be used together with other forms of map processing such as mipmaps and anisotropic filtering. == Availability == Some examples of practical texture compression systems are S3 Texture Compression (S3TC), PVRTC, Ericsson Texture Compression (ETC) and Adaptive Scalable Texture Compression (ASTC); these may be supported by special function units in modern graphics processing units (GPUs). OpenGL and OpenGL ES, as implemented on many video accelerator cards and mobile GPUs, can support multiple common kinds of texture compression - generally through the use of vendor extensions. == Supercompression == A compressed-texture can be further compressed in what is called "supercompression". Fixed-rate texture compression formats are optimized for random access and are much less efficient compared to image formats such as PNG. By adding further compression, a programmer can reduce the efficiency gap. The extra layer can be decompressed by the CPU so that the GPU receives a normal compressed texture, or in newer methods, decompressed by the GPU itself. Supercompression saves the same amount of VRAM as regular texture compression, but saves more disk space and download size. == Neural Texture Compression == Random-Access Neural Compression of Material Textures (Neural Texture Compression) is a Nvidia's technology which enables two additional levels of detail (16× more texels, so four times higher resolution) while maintaining similar storage requirements as traditional texture compression methods. The key idea is compressing multiple material textures and their mipmap chains together, and using a small neural network, that is optimized for each material, to decompress them.

    Read more →
  • Packed pixel

    Packed pixel

    In packed pixel or chunky framebuffer organization, the bits defining each pixel are clustered and stored consecutively. For example, if there are 16 bits per pixel, each pixel is represented in two consecutive (contiguous) 8-bit bytes in the framebuffer. If there are 4 bits per pixel, each framebuffer byte defines two pixels, one in each nibble. The latter example is as opposed to storing a single 4-bit pixel in a byte, leaving 4 bits of the byte unused. If a pixel has more than one channel, the channels are interleaved when using packed pixel organization. Packed pixel displays were common on early microcomputer system that shared a single main memory for both the central processing unit (CPU) and display driver. In such systems, memory was normally accessed a byte at a time, so by packing the pixels, the display system could read out several pixels worth of data in a single read operation. Packed pixel is one of two major ways to organize graphics data in memory, the other being planar organization, where each pixel is made of individual bits stored in their own plane. For a 4-bit color value, memory would be organized as four screen-sized planes of one bit each and a single pixel's value built up by selecting the appropriate bit from each plane. Planar organization has the advantage that the data can be accessed in parallel, and is used when memory bandwidth is an issue.

    Read more →
  • Shape factor (image analysis and microscopy)

    Shape factor (image analysis and microscopy)

    Shape factors are dimensionless quantities used in image analysis and microscopy that numerically describe the shape of a particle, independent of its size. Shape factors are calculated from measured dimensions, such as diameter, chord lengths, area, perimeter, centroid, moments, etc. The dimensions of the particles are usually measured from two-dimensional cross-sections or projections, as in a microscope field, but shape factors also apply to three-dimensional objects. The particles could be the grains in a metallurgical or ceramic microstructure, or the microorganisms in a culture, for example. The dimensionless quantities often represent the degree of deviation from an ideal shape, such as a circle, sphere or equilateral polyhedron. Shape factors are often normalized, that is, the value ranges from zero to one. A shape factor equal to one usually represents an ideal case or maximum symmetry, such as a circle, sphere, square or cube. == Aspect ratio == The most common shape factor is the aspect ratio, a function of the largest diameter and the smallest diameter orthogonal to it: A R = d min d max {\displaystyle A_{R}={\frac {d_{\min }}{d_{\max }}}} The normalized aspect ratio varies from approaching zero for a very elongated particle, such as a grain in a cold-worked metal, to near unity for an equiaxed grain. The reciprocal of the right side of the above equation is also used, such that the AR varies from one to approaching infinity. == Circularity == Another very common shape factor is the circularity (or isoperimetric quotient), a function of the perimeter P and the area A: f circ = 4 π A P 2 {\displaystyle f_{\text{circ}}={\frac {4\pi A}{P^{2}}}} The circularity of a circle is 1, and much less than one for a starfish footprint. The reciprocal of the circularity equation is also used, such that fcirc varies from one for a circle to infinity. == Elongation shape factor == The less-common elongation shape factor is defined as the square root of the ratio of the two second moments in of the particle around its principal axes. f elong = i 2 i 1 {\displaystyle f_{\text{elong}}={\sqrt {\frac {i_{2}}{i_{1}}}}} == Compactness shape factor == The compactness shape factor is a function of the polar second moment in of a particle and a circle of equal area A. f comp = A 2 2 π i 1 2 + i 2 2 {\displaystyle f_{\text{comp}}={\frac {A^{2}}{2\pi {\sqrt {{i_{1}}^{2}+{i_{2}}^{2}}}}}} The fcomp of a circle is one, and much less than one for the cross-section of an I-beam. == Waviness shape factor == The waviness shape factor of the perimeter is a function of the convex portion Pcvx of the perimeter to the total. f wav = P cvx P {\displaystyle f_{\text{wav}}={\frac {P_{\text{cvx}}}{P}}} Some properties of metals and ceramics, such as fracture toughness, have been linked to grain shapes. == An application of shape factors == Greenland, the largest island in the world, has an area of 2,166,086 km2; a coastline (perimeter) of 39,330 km; a north–south length of 2670 km; and an east–west length of 1290 km. The aspect ratio of Greenland is A R = 1290 2670 = 0.483 {\displaystyle A_{R}={\frac {1290}{2670}}=0.483} The circularity of Greenland is f circ = 4 π ( 2166086 ) 39330 2 = 0.0176. {\displaystyle f_{\text{circ}}={\frac {4\pi (2166086)}{39330^{2}}}=0.0176.} The aspect ratio is agreeable with an eyeball-estimate on a globe. Such an estimate on a typical flat map, using the Mercator projection, would be less accurate due to the distorted scale at high latitudes. The circularity is deceptively low, due to the fjords that give Greenland a very jagged coastline (see the coastline paradox). A low value of circularity does not necessarily indicate a lack of symmetry, and shape factors are not limited to microscopic objects.

    Read more →
  • Intrapixel and Interpixel processing

    Intrapixel and Interpixel processing

    Intrapixel and Interpixel processing is used in the processing of computers graphics, as well as sensors and images in equipment such as cameras. For computer graphics, CMOS sensor processing is done in pixel level. This process includes two general categories: intrapixel processing, where the processing is performed on the individual pixel signals, and interpixel processing, where the processing is performed locally or globally on signals from several pixels. The purpose of interpixel processing is to perform early vision processing, not merely to capture images. Intrapixel and Interpixel processing is an integral part of spatial processing within the earth Mixed Spatial Attraction Model. This also includes use within hyperspectral image processing.

    Read more →
  • GEPIR

    GEPIR

    GEPIR (Global Electronic Party Information Registry) was a distributed database operated and owned by GS1 that contains basic information on over 1,000,000 companies in over 100 countries. The database could be searched by Global Trade Item Number (GTIN) code (including Universal Product Code (UPC) and EAN-13 codes), container Code (Serial Shipping Container Code (SSCC)), location number (Global Location Number (GLN)), and (in some countries) the company name. A SOAP webservice existed for API access. As of end December 2023, GEPIR was replaced by a service called Verified by GS1. While it operated, GEPIR had more than 1 million members in more than 100 countries. In 2013, all GS1 111 member organisations joined GEPIR. == Access == GEPIR was accessible for free in almost all countries but the number of request per day was limited (from 20 to 30). Since October 2013, GS1 France restricts access to GEPIR to companies (registration with SIREN code was required to use it). A premium access service had been created by GS1 France in January 2010 which allows companies to use GS1 web and SOAP interface without any limit. == System architecture == GEPIR was a lookup service coordinated by the GS1 GO that provided all end users with the ability to look up information about GS1 Identification Keys. Depending on the service, systems were provided by GS1 Member Organisations (MOs) or 3rd party service providers, or both. Where a GS1 MO did not choose to provide the service directly to its end users, the GS1 Global Office provided the service for that geography. Some services involved a technical component deployed by the GS1 Global Office that coordinates the systems provided by GS1 MOs and/or 3rd party service providers. The GEPIR service was provided by systems deployed by GS1 MOs, with the GS1 GO providing a central point of coordination to federate the local systems. The GS1 GO also provides the MO-level service for MOs that could not or did not wish to deploy their own system.

    Read more →
  • Sketchpad

    Sketchpad

    Sketchpad (a.k.a. Robot Draftsman) is a computer program written by Ivan Sutherland in 1963 in the course of his PhD thesis, for which he received the Turing Award in 1988, and the Kyoto Prize in 2012. It pioneered human–computer interaction (HCI), and is considered the ancestor of modern computer-aided design (CAD) programs and as a major breakthrough in the development of computer graphics in general. For example, Sketchpad inspired the graphical user interface (GUI) and object-oriented programming. Using the program, Sutherland showed that computer graphics could be used for both artistic and technical purposes and for demonstrating a novel method of human–computer interaction. == History == See History of the graphical user interface for a more detailed discussion of GUI development. == Software == Sketchpad was the earliest program ever to use a complete graphical user interface. The clever way the program organizes its geometric data pioneered the use of master (objects) and occurrences (instances) in computing and pointed forward to object-oriented programming. The main idea was to have master drawings which can be instantiated into many duplicates. When a master drawing is changed, then all instances change also. This was the first known form of an entity component system: for example instead of encapsulating points inside of a line object, the points are stored in a ring buffer as described in pages 48 to 52 of the paper, and the line only points to them. This allowed moving one point to alter all the shapes that use it in a single operation. The structures in Sketchpad were also able to store pointers to functions, to achieve a different behavior depending on the kind of object. In figure 3.8 of the paper, the "instances generic block" stores several "subroutine entries" which are pointers to functions: "display", "howbig" etc. This was an early form of virtual functions. Geometric constraints was another major invention in Sketchpad, letting a user easily constrain geometric properties in the drawing: for instance, the length of a line or the angle between two lines could be fixed. As a trade magazine said, clearly Sutherland "broke new ground in 3D computer modeling and visual simulation, the basis for computer graphics and CAD/CAM". Very few programs can be called precedents for his achievements. Patrick J. Hanratty is sometimes called the "father of CAD/CAM" and wrote PRONTO, a numerical control language at General Electric in 1957, and wrote CAD software while working for General Motors beginning in 1961. Sutherland wrote in his thesis that Bolt, Beranek and Newman had a "similar program" and T-Square was developed by Peter Samson and one or more fellow MIT students in 1962, both for the PDP-1. The Computer History Museum holds program listings for Sketchpad. == Hardware == Sketchpad ran on the MIT Lincoln Laboratory TX-2 (1958) computer at the Massachusetts Institute of Technology (MIT), which had 64k of 36-bit words. The user drew on the computer monitor screen with the recently invented light pen, which relayed information on its position by computing at what time the light from the scanning cathode-ray tube screen is detected. To configure the initial position of the light pen, the word INK was displayed on the screen, which, upon tapping, initialised the program with a white cross to continue keeping track of the pen's movement relative to its prior position. Of the 36 bits available to store each display spot in the display file, 20 gave the coordinates of that spot for the display system and the remaining 16 gave the address of the n-component element responsible for adding that spot to display. The TX-2 was an experimental machine and the hardware changed often (on Wednesdays, according to Sutherland). By 1975, the light pen and the cathode-ray tube with which it had been used had been removed. == Publications == The Sketchpad program was part and parcel of Sutherland's Ph.D. thesis at MIT and peripherally related to the Computer-Aided Design project at that time. Sketchpad: A Man-Machine Graphical Communication System.

    Read more →
  • Rapid application development

    Rapid application development

    Rapid application development (RAD), also called rapid application building (RAB), is both a general term for adaptive software development approaches, and the name for James Martin's method of rapid development. In general, RAD approaches to software development put less emphasis on planning and more emphasis on an adaptive process. Prototypes are often used in addition to or sometimes even instead of design specifications. RAD is especially well suited for (although not limited to) developing software that is driven by user interface requirements. Graphical user interface builders are often called rapid application development tools. Other approaches to rapid development include the adaptive, agile, spiral, and unified models. == History == Rapid application development was a response to plan-driven waterfall processes, developed in the 1970s and 1980s, such as the Structured Systems Analysis and Design Method (SSADM). One of the problems with these methods is that they were based on a traditional engineering model used to design and build things like bridges and buildings. Software is an inherently different kind of artifact. Software can change the process used to solve a problem. As a result, knowledge gained from the development process itself can feed back to the requirements and design of the solution. Plan-driven approaches attempt to define requirements, the solution, and the implementation plan, and have a process that discourages changes. RAD approaches, on the other hand, recognize that software development is a knowledge intensive process and provide flexible processes that help take advantage of knowledge gained during the project to improve or adapt the solution. The first such RAD alternative was developed by Barry Boehm and was known as the spiral model. Boehm and other subsequent RAD approaches emphasized developing prototypes as well as or instead of rigorous design specifications. Prototypes had several advantages over traditional specifications: Risk reduction. A prototype could test some of the most difficult potential parts of the system early on in the life-cycle. This can provide valuable information as to the feasibility of a design and can prevent the team from pursuing solutions that turn out to be too complex or time-consuming to implement. This benefit of finding problems earlier in the life-cycle rather than later was a key benefit of the RAD approach. The earlier a problem can be found the cheaper it is to address. Users are better at using and reacting than at creating specifications. In the waterfall model it was common for a user to sign off on a set of requirements but then when presented with an implemented system to suddenly realize that a given design lacked some critical features or was too complex. In general most users give much more useful feedback when they can experience a prototype of the running system rather than abstractly define what that system should be. Prototypes can be usable and can evolve into the completed product. One approach used in some RAD methods was to build the system as a series of prototypes that evolve from minimal functionality to moderately useful to the final completed system. The advantage of this besides the two advantages above was that the users could get useful business functionality much earlier in the process. Starting with the ideas of Barry Boehm and others, James Martin developed the rapid application development approach during the 1980s at IBM and finally formalized it by publishing a book in 1991, Rapid Application Development. This has resulted in some confusion over the term RAD even among IT professionals. It is important to distinguish between RAD as a general alternative to the waterfall model and RAD as the specific method created by Martin. The Martin method was tailored toward knowledge intensive and UI intensive business systems. These ideas were further developed and improved upon by RAD pioneers like James Kerr and Richard Hunter, who together wrote the seminal book on the subject, Inside RAD, which followed the journey of a RAD project manager as he drove and refined the RAD Methodology in real-time on an actual RAD project. These practitioners, and those like them, helped RAD gain popularity as an alternative to traditional systems project life cycle approaches. The RAD approach also matured during the period of peak interest in business re-engineering. The idea of business process re-engineering was to radically rethink core business processes such as sales and customer support with the new capabilities of Information Technology in mind. RAD was often an essential part of larger business re engineering programs. The rapid prototyping approach of RAD was a key tool to help users and analysts "think out of the box" about innovative ways that technology might radically reinvent a core business process. Much of James Martin's comfort with RAD stemmed from Dupont's Information Engineering division and its leader Scott Schultz and their respective relationships with John Underwood who headed up a bespoke RAD development company that pioneered many successful RAD projects in Australia and Hong Kong. Successful projects that included ANZ Bank, Lendlease, BHP, Coca-Cola Amatil, Alcan, Hong Kong Jockey Club and numerous others. Success that led to both Scott Shultz and James Martin both spending time in Australia with John Underwood to understand the methods and details of why Australia was disproportionately successful in implementing significant mission critical RAD projects. == James Martin approach == The James Martin approach to RAD divides the process into four distinct phases: Requirements planning phase – combines elements of the system planning and systems analysis phases of the systems development life cycle (SDLC). Users, managers, and IT staff members discuss and agree on business needs, project scope, constraints, and system requirements. It ends when the team agrees on the key issues and obtains management authorization to continue. User design phase – during this phase, users interact with systems analysts and develop models and prototypes that represent all system processes, inputs, and outputs. The RAD groups or subgroups typically use a combination of joint application design (JAD) techniques and CASE tools to translate user needs into working models. User design is a continuous interactive process that allows users to understand, modify, and eventually approve a working model of the system that meets their needs. Construction phase – focuses on program and application development task similar to the SDLC. In RAD, however, users continue to participate and can still suggest changes or improvements as actual screens or reports are developed. Its tasks are programming and application development, coding, unit-integration and system testing. Cutover phase – resembles the final tasks in the SDLC implementation phase, including data conversion, testing, changeover to the new system, and user training. Compared with traditional methods, the entire process is compressed. As a result, the new system is built, delivered, and placed in operation much sooner. == Advantages == In modern Information Technology environments, many systems are now built using some degree of Rapid Application Development (not necessarily the James Martin approach). In addition to Martin's method, agile methods and the Rational Unified Process are often used for RAD development. The purported advantages of RAD include: Better quality. By having users interact with evolving prototypes the business functionality from a RAD project can often be much higher than that achieved via a waterfall model. The software can be more usable and has a better chance to focus on business problems that are critical to end users rather than technical problems of interest to developers. However, this excludes other categories of what are usually known as Non-functional requirements (AKA constraints or quality attributes) including security and portability. Risk control. Although much of the literature on RAD focuses on speed and user involvement a critical feature of RAD done correctly is risk mitigation. It's worth remembering that Boehm initially characterized the spiral model as a risk based approach. A RAD approach can focus in early on the key risk factors and adjust to them based on empirical evidence collected in the early part of the process. E.g., the complexity of prototyping some of the most complex parts of the system. More projects completed on time and within budget. By focusing on the development of incremental units the chances for catastrophic failures that have dogged large waterfall projects is reduced. In the Waterfall model it was common to come to a realization after six months or more of analysis and development that required a radical rethinking of the entire system. With RAD this kind of information can be discovered and acted upon earlier in the proces

    Read more →
  • Nagarik App

    Nagarik App

    Nagarik App (translation: Citizen App) is a mobile application launched by the Government of Nepal to provide government-related services in a single online platform. The app was developed to facilitate an easier, systematic, and simplified delivery of government services to Nepali citizens digitally. The app was launched to play a pivotal role in revolutionizing the way citizens interact with the government. It offers government services through a single unified platform, minimizing the need for citizens to navigate multiple channels or physical offices for their diverse needs of government services. The services are added gradually according to the needs and services required. The government aims to reduce the physical queues and the need to be physically present to get services from the different government offices. One can get services online round-the-clock even during holidays. As of now, 25 services are included in the app, ranging from Police Clearance Report to Voters Card. The app contains and provides a vast range of government services. The app was launched on the occasion of the fourth National Information and Communication Technology Day, 2021 (2078 BS). The event marked a significant milestone in Nepal’s digital transformation journey. It aims to reduce all the bureaucratic hurdles that the citizens have been facing and make government services more efficient and convenient. In Oct 20, 2024, a E-Chalan was introduced for managing traffic violations in initially piloting in Kathmandu Valley. The Kathmandu Valley Traffic Police Office announced that physical licenses would no longer be confiscated for traffic rule violations. Instead, a "Digital Chit (E-Chalan)" system was implemented, allowing drivers to pay fines electronically. Integrated with the NagarikApp, the system enables police to access drivers' licenses, record violations, and update details directly in the app. == Features and Services == Inland Revenue Department (Nepal) PAN Registration Election Commission (Nepal) Voter Card Pre-Registration and Details Nepal Police Online Clearance Report Traffic Violations and Fine Payment Nepal Passport, Driving License, National Identity Card (NID), Citizenship, and Voter ID link details My Municipality (Includes contact info of the representatives, services such as ambulance, nearby police, and budget programs and plans) The Government Press ID card PF/PAN/SST/CIT statements can be viewed Nagarik Pahichan Dwar (Online bank accounts can be opened and KYC can be verified for selected banks using the QR) == Awards and honors == Each year, World Summit Award honors outstanding digital applications and solutions across various categories. The winners of the World Summit Award represent the pinnacle of innovation in their respective categories. Nagarik App was selected among 180 participants and won the World Summit Award of 2022 in Government and Citizen Engagement category. == Latest Statistics & Usage Trends (2082 BS / 2025 AD) == As of August 2025, over 1.5 million Nepali citizens have registered and actively use the Nagarik App, according to the National Information Technology Center (NITC). The majority of daily logins come from: Kathmandu Valley – 37% of total users Province 1 (Koshi) – 19% of total users Bagmati Province – 15% of total users On average, 45,000+ transactions (service requests, document verifications, and payments) are processed through the app each day. The most-used services include: PAN Card Registration – 28% of total requests Police Clearance Report – 22% Driving License Linking & E-Chalan Payment – 18% Vehicle Tax Payment – 14% Source: Internal report from NITC, July 2025 == Step-by-Step: How to Link Your Driving License with Nagarik App == Update the App – Install the latest version from Play Store or App Store. Login or Register – Ensure your SIM is registered in your own name. Go to “Transport Services” in the menu. Select “Driving License” – Enter your license number and date of birth. Verify via OTP – Sent to your registered mobile number. Confirmation – Your digital license will appear inside the app. This guide is continuously updated to reflect the latest rules from the Kathmandu Valley Traffic Police Office and changes in NITC’s backend system. For in-depth details, step-by-step tutorials, and the most recent Nagarik App updates, visit the full article on The Bipin Blog.

    Read more →
  • Global serializability

    Global serializability

    In concurrency control of databases, transaction processing (transaction management), and other transactional distributed applications, global serializability (or modular serializability) is a property of a global schedule of transactions. A global schedule is the unified schedule of all the individual database (and other transactional object) schedules in a multidatabase environment (e.g., federated database). Complying with global serializability means that the global schedule is serializable, has the serializability property, while each component database (module) has a serializable schedule as well. In other words, a collection of serializable components provides overall system serializability, which is usually incorrect. A need in correctness across databases in multidatabase systems makes global serializability a major goal for global concurrency control (or modular concurrency control). With the proliferation of the Internet, Cloud computing, Grid computing, and small, portable, powerful computing devices (e.g., smartphones), as well as increase in systems management sophistication, the need for atomic distributed transactions and thus effective global serializability techniques, to ensure correctness in and among distributed transactional applications, seems to increase. In a federated database system or any other more loosely defined multidatabase system, which are typically distributed in a communication network, transactions span multiple (and possibly distributed) databases. Enforcing global serializability in such system, where different databases may use different types of concurrency control, is problematic. Even if every local schedule of a single database is serializable, the global schedule of a whole system is not necessarily serializable. The massive communication exchanges of conflict information needed between databases to reach conflict serializability globally would lead to unacceptable performance, primarily due to computer and communication latency. Achieving global serializability effectively over different types of concurrency control has been open for several years. == The global serializability problem == === Problem statement === The difficulties described above translate into the following problem: Find an efficient (high-performance and fault tolerant) method to enforce Global serializability (global conflict serializability) in a heterogeneous distributed environment of multiple autonomous database systems. The database systems may employ different concurrency control methods. No limitation should be imposed on the operations of either local transactions (confined to a single database system) or global transactions (span two or more database systems). === Quotations === Lack of an appropriate solution for the global serializability problem has driven researchers to look for alternatives to serializability as a correctness criterion in a multidatabase environment (e.g., see Relaxing global serializability below), and the problem has been characterized as difficult and open. The following two quotations demonstrate the mindset about it by the end of the year 1991, with similar quotations in numerous other articles: "Without knowledge about local as well as global transactions, it is highly unlikely that efficient global concurrency control can be provided... Additional complications occur when different component DBMSs [Database Management Systems] and the FDBMSs [Federated Database Management Systems] support different concurrency mechanisms... It is unlikely that a theoretically elegant solution that provides conflict serializability without sacrificing performance (i.e., concurrency and/or response time) and availability exists." === Proposed solutions === Several solutions, some partial, have been proposed for the global serializability problem. Among them: Global conflict graph (serializability graph, precedence graph) checking Distributed Two-phase locking (Distributed 2PL) Distributed Timestamp ordering Tickets (local logical timestamps which define local total orders, and are propagated to determine global partial order of transactions) == Relaxing global serializability == Some techniques have been developed for relaxed global serializability (i.e., they do not guarantee global serializability; see also Relaxing serializability). Among them (with several publications each): Quasi serializability Two-level serializability Another common reason nowadays for Global serializability relaxation is the requirement of availability of internet products and services. This requirement is typically answered by large scale data replication. The straightforward solution for synchronizing replicas' updates of a same database object is including all these updates in a single atomic distributed transaction. However, with many replicas such a transaction is very large, and may span several computers and networks that some of them are likely to be unavailable. Thus such a transaction is likely to end with abort and miss its purpose. Consequently, Optimistic replication (Lazy replication) is often utilized (e.g., in many products and services by Google, Amazon, Yahoo, and alike), while global serializability is relaxed and compromised for eventual consistency. In this case relaxation is done only for applications that are not expected to be harmed by it. Classes of schedules defined by relaxed global serializability properties either contain the global serializability class, or are incomparable with it. What differentiates techniques for relaxed global conflict serializability (RGCSR) properties from those of relaxed conflict serializability (RCSR) properties that are not RGCSR is typically the different way global cycles (span two or more databases) in the global conflict graph are handled. No distinction between global and local cycles exists for RCSR properties that are not RGCSR. RCSR contains RGCSR. Typically RGCSR techniques eliminate local cycles, i.e., provide local serializability (which can be achieved effectively by regular, known concurrency control methods); however, obviously they do not eliminate all global cycles (which would achieve global serializability).

    Read more →