AI App Kya Hai In Hindi

AI App Kya Hai In Hindi — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

International Road Traffic and Accident Database

The International Road Traffic and Accident Database (IRTAD) is an initiative dedicated to compiling and analyzing global road crash data. It is managed by the International Transport Forum (ITF) under the auspices of its permanent working group, which specializes in road safety, commonly referred to as the IRTAD Group. The primary objective of IRTAD is to provide a robust empirical basis for international comparisons in the field of road safety and to offer data to support the formulation of effective road safety policies. == Data availability == A portion of the data gathered by IRTAD is accessible for free through the OECD statistics website, however the remaining data requires a subscription for access. == History == The IRTAD database was originally started in 1988 by Germany's Federal Institution for Roads (BASt) in response to demands for international comparative data. It was later taken over and expanded by the International Transport Forum and has grown to be an important resource for comparing road safety metrics between countries worldwide, although mostly in the developed world. Every year, the ITF publishes comparative and country-by-country road safety data gathered for the IRTAD database and analysed by the IRTAD Group in the ITF Road Safety Annual Report, informally known as "IRTAD Report". Over the years, the IRTAD acronym has come to stand not only for the database, but also for the Traffic Safety Data and Analysis Group (usually referred to as IRTAD Group). The IRTAD Group is the International Transport Forum's permanent working group on road safety. It consists of a group of international road safety experts drawn from national road administrations, road safety research institutes, International organizations, automobile associations, insurance companies, car manufacturers and other road safety stakeholders. The IRTAD Group is a major forum for international road safety collaboration and exchange of best practices. Its focus is on improving road safety data as a basis for targeting interventions that are effective in reducing the number of road deaths and serious traffic injuries. The work of IRTAD, among that of others, has spawned the creation of road safety observatories for different world regions: the Ibero-American Road Safety Observatory Archived 2020-06-28 at the Wayback Machine (OISEVI), the African Road Safety Observatory Archived 2020-06-10 at the Wayback Machine, and the South-East Asian Road Safety Observatory. The ITF supports OISEVI through the Spanish-language IRTAD-LAC database and is actively involved in the implementation of the African and South East-Asian observatories. The genesis of the road safety observatory movement dates back to 2008, when the ITF, via IRTAD, began to facilitate twinning between countries striving to improve their road safety record and countries with high road safety performance. The initial twinning was between Jamaica and the United Kingdom. This work was supported by the World Bank, the Inter-American Development Bank (IADB) and the FIA Foundation. The twinning between Argentina and Spain in 2011 led to the creation of OISEVI. To this day, the ITF supports OISEVI through the Spanish-language IRTAD-LAC database. In 2006, the ITF set up Safer City Streets, a global traffic safety network for cities that replicates the successful IRTAD approach for urban road safety.
Read more →
Hilscher netx network controller

The netX network controller family (based on ASICs), developed by Hilscher Gesellschaft für Systemautomation mbH, is a solution for implementing all proven Fieldbus and Real-Time Ethernet systems. It was the first Multi-Protocol ASIC which combines Real-Time-Ethernet and Fieldbus System in one solution. The Multiprotocol functionality is done over a flexible cpu sub system called XC. Through exchanging some microcode the XC is able to realize beside others a PROFINET IRT Switch, EtherCAT Slave, Ethernet Powerlink HUB, PROFIBUS, CAN bus, CC-Link Industrial Networks Interface. == The Hilscher netX family == === Multiplex Matrix IOs (MMIO) === The Multiplex Matrix is a set of PINs which could be configured freely with peripheral functions. Options are CAN, UART, SPI, I2C, GPIOs, PIOs and SYNC Trigger. === GPIOs === The GPIOs from Hilscher are able to generate Interrupts, could count level or flags, or could be connected to a timer unit to auto generate a PWM. The Resolution of the PWM is normally 10ns. In some netX ASICS is a dedicated Motion unit with a resolution if 1ns is available.
Read more →
NRENum.net

The NRENum.net service is an end-user ENUM service run by TERENA and the participating national research and education networking organisations (NRENs), primarily for academia. NRENum.net is considered as a complementary service and a valid alternative to the Golden ENUM tree. The domain nrenum.net is being populated in order to provide the infrastructure in DNS for storage of E.164 numbers. The NRENum.net service includes the operation of the Tier-0 root Domain Name Server(s) and the delegation of county codes to NRENum.net Registries. NRENum.net is a registered community trademark of TERENA. == Service description == E.164 Telephone Number Mapping (ENUM) is a standard protocol that is the result of work of the Internet Engineering Task Force's Telephone Number Mapping working group. ENUM translates a telephone number into a domain name. This allows users to continue to use the existing phone number formats they are familiar with, while allowing the call to be routed using DNS. This makes ENUM a quick, stable and cheap link between telecommunications systems and the Internet. RFC 3761 discusses the use of the Domain Name System for storage of E.164 numbers. More specifically, how DNS can be used for identifying available services connected to one E.164 number. The RIPE NCC provides DNS operations for e164.arpa (known as Golden ENUM tree) in accordance with the instructions from the Internet Architecture Board. The NRENum.net service is an end-user ENUM service run by TERENA and the participating NRENs primarily for academia. NRENum.net is considered as a complementary service and a valid alternative to the Golden ENUM tree. The domain nrenum.net is being populated in order to provide the infrastructure in DNS for storage of E.164 numbers. The NRENum.net service includes the operation of the Tier-0 root Domain Name Servers and the delegation of county codes to NRENum.net Registries. NRENum.net is a registered community trademark of TERENA. NRENum.net facilitates services such as Voice over IP and videoconferencing. NRENum.net tree refers to the tree structure where: Tier-0 root Domain Name Servers (technically one master and several secondary servers ensuring resilience) are run by the hosting organisations and coordinated by the NRENum.net Operations Team. Tier-1 Domain Name Servers are run by the NRENum.net (national or regional) Registries responsible for the country code(s) delegated. Tier-2 and lower DNS sub-delegations may be implemented, regulated by the national service policies. An NRENum.net Registry is an entity that is authorised by the NRENum.net Operations Team to operate the national or regional Tier-1 Domain Name Server and be responsible for the county code(s) delegated. In many countries there is a National Research and Education Networking organisation (NREN) that acts as the Registry of the country. An NRENum.net Registrar is responsible for the number/block registration in the Tier-1 DNS and a Number Validation Entity is responsible for the validation of the E.164 telephone numbers to be registered. The NREN may at the same time have the role of the NRENum.net Registry, Registrar and Validation Entity for the country code(s) delegated. A Registrant (end user) is an E.164 telephone number holder. Holders of E.164 numbers who want to be listed in the service must contact the appropriate NRENum.net Registrar. Number (block) delegation is the technical process of assigning country codes to national registries, or number blocks under country codes to end users. Number (block) registration is the technical process of configuring DNS and populating it with the appropriate ENUM records (i.e., adding NAPTR records to DNS) via registrars. The ITU-T strictly regulates the number structure of valid E.164 telephone numbers and assigns number blocks to national authorities (telecom regulators) or recently to global entities directly. The national authorities can further delegate the number ranges to local operators within the country or region. A virtual number has either a non-valid E.164 number structure (e.g., longer than 15 digits) or has a valid structure but is not assigned to any national authorities or operators. The number Validation Entity is responsible for checking the numbers to be registered to NRENum.net. == History == The idea for the NRENum.net service was conceived in 2006. NRENum.net became operational in August 2006, and was run by Bernie Höneisen, a staff member of SWITCH, and Kewin Stöckigt, a staff member of AARNet, as a private service, with technical support from SWITCH and the participants in the TERENA Task Force on Enhanced Communication Services (TF-ECS). When that task force completed its activities in 2008, TERENA agreed to take over the coordination of the NRENum.net service. By that time, nine NRENs had joined NRENum.net. The service continued to grow during the next years, and in March 2012 NRENum.net went global when RNP from Brazil joined the service as its 14th partificpant and the first outside Europe. In 2011, the participants decided to migrate the operation of the service's master Domain Name Server to NIIF and the operation of the two secondary DNSs to CARNET and SWITCH. In 2013, Internet2, AARNet and NORDUnet set up additional secondary Domain Name Servers for their regions, thereby completing the global distribution of DNS slaves and bringing the resilience of the NRENum.net infrastructure to a high level. == Governance == TERENA has established a lightweight global governance structure. The Global NRENum.net Governance Committee (GNGC) is the highest-level strategic body responsible for overall NRENum.net service definition, sustainability and long-term strategy. This includes formulating and recommending service governance principles and policies. Its members are nominated by the NRENum.net Registries in the various world regions, and are appointed by TERENA. The GNGC is composed of two members representing Europe, two representing the Asia-Pacific region, and two representing the Americas. The NRENum.net Operations Team is responsible for the day-to-day operations of the Tier-0 root DNSs and the handling of country code delegation requests. It may escalate technical or policy issues to the GNGC for discussion. TERENA is responsible for ensuring the correct and secure operations of the NRENum.net service performed by the NRENum.net Operations Team and governance by the GNGC. TERENA also supports the development of technical improvements to the NRENum.net service and promotes the deployment of NRENum.net worldwide. == Geographical deployment == Thirty-two county codes are delegated in the NRENum.net service. Below these are listed per world region. === Europe === === Asia-Pacific === === North America === +1 United States (Internet2) === Latin America === === Caribbean === === Africa === +262 Réunion, Mayotte (RENATER)
Read more →
Clustered file system

A clustered file system (CFS) is a file system which is shared by being simultaneously mounted on multiple servers. There are several approaches to clustering, most of which do not employ a clustered file system (only direct attached storage for each node). Clustered file systems can provide features like location-independent addressing and redundancy which improve reliability or reduce the complexity of the other parts of the cluster. Parallel file systems are a type of clustered file system that spread data across multiple storage nodes, usually for redundancy or performance. == Shared-disk file system == A shared-disk file system uses a storage area network (SAN) to allow multiple computers to gain direct disk access at the block level. Access control and translation from file-level operations that applications use to block-level operations used by the SAN must take place on the client node. The most common type of clustered file system, the shared-disk file system – by adding mechanisms for concurrency control – provides a consistent and serializable view of the file system, avoiding corruption and unintended data loss even when multiple clients try to access the same files at the same time. Shared-disk file-systems commonly employ some sort of fencing mechanism to prevent data corruption in case of node failures, because an unfenced device can cause data corruption if it loses communication with its sister nodes and tries to access the same information other nodes are accessing. The underlying storage area network may use any of a number of block-level protocols, including SCSI, iSCSI, HyperSCSI, ATA over Ethernet (AoE), Fibre Channel, network block device, and InfiniBand. There are different architectural approaches to a shared-disk filesystem. Some distribute file information across all the servers in a cluster (fully distributed). === Examples === == Distributed file systems == Distributed file systems do not share block level access to the same storage but use a network protocol. These are commonly known as network file systems, even though they are not the only file systems that use the network to send data. Distributed file systems can restrict access to the file system depending on access lists or capabilities on both the servers and the clients, depending on how the protocol is designed. The difference between a distributed file system and a distributed data store is that a distributed file system allows files to be accessed using the same interfaces and semantics as local files – for example, mounting/unmounting, listing directories, read/write at byte boundaries, system's native permission model. Distributed data stores, by contrast, require using a different API or library and have different semantics (most often those of a database). === Design goals === Distributed file systems may aim for "transparency" in a number of aspects. That is, they aim to be "invisible" to client programs, which "see" a system which is similar to a local file system. Behind the scenes, the distributed file system handles locating files, transporting data, and potentially providing other features listed below. Access transparency: clients are unaware that files are distributed and can access them in the same way as local files are accessed. Location transparency: a consistent namespace exists encompassing local as well as remote files. The name of a file does not give its location. Concurrency transparency: all clients have the same view of the state of the file system. This means that if one process is modifying a file, any other processes on the same system or remote systems that are accessing the files will see the modifications in a coherent manner. Failure transparency: the client and client programs should operate correctly after a server failure. Heterogeneity: file service should be provided across different hardware and operating system platforms. Scalability: the file system should work well in small environments (1 machine, a dozen machines) and also scale gracefully to bigger ones (hundreds through tens of thousands of systems). Replication transparency: Clients should not have to be aware of the file replication performed across multiple servers to support scalability. Migration transparency: files should be able to move between different servers without the client's knowledge. === History === The Incompatible Timesharing System used virtual devices for transparent inter-machine file system access in the 1960s. More file servers were developed in the 1970s. In 1976, Digital Equipment Corporation created the File Access Listener (FAL), an implementation of the Data Access Protocol as part of DECnet Phase II which became the first widely used network file system. In 1984, Sun Microsystems created the file system called "Network File System" (NFS) which became the first widely used Internet Protocol based network file system. Other notable network file systems are Andrew File System (AFS), Apple Filing Protocol (AFP), NetWare Core Protocol (NCP), and Server Message Block (SMB) which is also known as Common Internet File System (CIFS). In 1986, IBM announced client and server support for Distributed Data Management Architecture (DDM) for the System/36, System/38, and IBM mainframe computers running CICS. This was followed by the support for IBM Personal Computer, AS/400, IBM mainframe computers under the MVS and VSE operating systems, and FlexOS. DDM also became the foundation for Distributed Relational Database Architecture, also known as DRDA. There are many peer-to-peer network protocols for open-source distributed file systems for cloud or closed-source clustered file systems, e. g.: 9P, AFS, Coda, CIFS/SMB, DCE/DFS, WekaFS, Lustre, PanFS, Google File System, Mnet, Chord Project. === Examples === == Network-attached storage == Network-attached storage (NAS) provides both storage and a file system, like a shared disk file system on top of a storage area network (SAN). NAS typically uses file-based protocols (as opposed to block-based protocols a SAN would use) such as NFS (popular on UNIX systems), SMB/CIFS (Server Message Block/Common Internet File System) (used with MS Windows systems), AFP (used with Apple Macintosh computers), or NCP (used with OES and Novell NetWare). == Design considerations == === Avoiding single point of failure === The failure of disk hardware or a given storage node in a cluster can create a single point of failure that can result in data loss or unavailability. Fault tolerance and high availability can be provided through data replication of one sort or another, so that data remains intact and available despite the failure of any single piece of equipment. For examples, see the lists of distributed fault-tolerant file systems and distributed parallel fault-tolerant file systems. === Performance === A common performance measurement of a clustered file system is the amount of time needed to satisfy service requests. In conventional systems, this time consists of a disk-access time and a small amount of CPU-processing time. But in a clustered file system, a remote access has additional overhead due to the distributed structure. This includes the time to deliver the request to a server, the time to deliver the response to the client, and for each direction, a CPU overhead of running the communication protocol software. === Concurrency === Concurrency control becomes an issue when more than one person or client is accessing the same file or block and want to update it. Hence updates to the file from one client should not interfere with access and updates from other clients. This problem is more complex with file systems due to concurrent overlapping writes, where different writers write to overlapping regions of the file concurrently. This problem is usually handled by concurrency control or locking which may either be built into the file system or provided by an add-on protocol. == History == IBM mainframes in the 1970s could share physical disks and file systems if each machine had its own channel connection to the drives' control units. In the 1980s, Digital Equipment Corporation's TOPS-20 and OpenVMS clusters (VAX/ALPHA/IA64) included shared disk file systems.
Read more →
Digital Image Processing with Sound

DIPS (Digital Image Processing with Sound) is a set of plug-in objects that handle real-time digital image processing in Max/MSP programming environment. Combining with the built-in objects of the environment, DIPS enables to program the interaction between audio and visual events with ease, and supports the realization of interactive multimedia art as well as interactive computer music. == Summary of Features == A plug-in software for Max/MSP (Max 5 and 6) More than 300 Max external objects and abstractions More than 90 OpenGL objects included More than 110 visual effect objects (Dfx library, Core Image Filters) A utility library for the easy of programming (prefix Dlib) A comprehensive set of sample patches, and a detailed tutorial Handling images & movie files (QuickTime, OpenGL) Render and move 3D models (OpenGL) Video signal input (QuickTime, video texture) Video input analysis: motion detect, face tracking (OpenCV, OpenGL) Importing 3D models (.obj file) Importing Quartz Composer files OpenGL Shading Language (GLSL) programming interface Easy integration of visual events using DIPSWindowMixer (OpenGL) == Description == DIPS is a free plug-in software (a set of external objects) for Max/MSP. It supports the designing of the interaction between sound and visual events in Max using Apple’s Core Image, OpenGL and OpenCV technologies, and consequently, provides a powerful and user-friendly programming environment for the creation of interactive multimedia art. DIPS can be used to detect a performer’s motions and to track positions of subtle details, such as the face, mouth, and eyes. It can also be used to measure the distance between objects and a Kinect sensor system, and offers powerful tools for realtime image processing of incoming video stream and stored movie files. In addition, it can be used to create complex images in a virtual three-dimensional space. The DIPS consists of a library of more than 300 Max external objects and abstractions, a comprehensive set of sample patches, and a detailed tutorial. Some of its strong points, in comparison with other similar plug-ins and software, are its ease of programming, power, and efficiency. The sample patches and tutorial contained in the installation package allows composers and artists who are interested in the creation of interactive art to realize sophisticated realtime video effects on a live video signal at their first practice. And because of its ease of programming, it is likely that one will soon acquire skills needed to create state-of-the-art interactive performance works, multimedia installations, interactive multimedia artworks, and Max VJ applications using DIPS. == History == Initially developed by Shu Matsuda in 1997, DIPS was a plug-in software for Max/FTS running on SGI Octane and O2 computers. Since 2000, it has been developed by the DIPS Development Group supervised by Takayuki Rai. Current active group members are Shu Matsuda, Yota Morimoto, Takuto Fukuda, and Keitaro Takahashi. Previously, Chikashi Miyama, Daichi Ando and Takayuki Hamano also contributed to its development. 2013 DIPS5 for Max (Mac OS X) 2009 DIPS4 for Max/MSP (Mac OS X) 2006 DIPS3 for Max/MSP (Mac OS X) 2003 DIPS2 for jMax4 (Mac OS X) 2002 DIPS for jMax2 (Mac OS X & Linux) 2000 DIPS for jMax (Linux)
Read more →
Key Transparency

Key Transparency allows communicating parties to verify public keys used in end-to-end encryption. In many end-to-end encryption services, to initiate communication a user will reach out to a central server and request the public keys of the user with which they wish to communicate. If the central server is malicious or becomes compromised, a man-in-the-middle attack can be launched through the issuance of incorrect public keys. The communications can then be intercepted and manipulated. Additionally, legal pressure could be applied by surveillance agencies to manipulate public keys and read messages. With Key Transparency, public keys are posted to a public log that can be universally audited. Communicating parties can verify public keys used are accurate.
Read more →
Content management

Content management (CM) are a set of processes and technologies that support the collection, managing, and publishing of information in any form or medium. When stored and accessed via computers, this information may be more specifically referred to as digital content, or simply as content. Digital content may take the form of text (such as electronic documents), images, multimedia files (such as audio or video files), or any other file type that follows a content lifecycle requiring management. The process of content development and management is complex enough that various commercial software vendors (large and small), such as Interwoven and Microsoft, offer content management software to control and automate significant aspects of the content lifecycle. == Process == Content management practices and goals vary by mission and by organizational governance structure. News organizations, e-commerce websites, and educational institutions all use content management, but in different ways. This leads to differences in terminology and in the names and number of steps in the process. For example, some digital content is created by one or more authors. Over time that content may be edited. One or more individuals may provide some editorial oversight, approving the content for publication. Publishing may take many forms: it may be the act of "pushing" content out to others, or simply granting digital access rights to certain content to one or more individuals. Later that content may be superseded by another version of the content and thus retired or removed from use (as when this wiki page is modified). Content management is an inherently collaborative process. It often consists of the following basic roles and responsibilities: Creator – responsible for creating and editing content. Editor – responsible for tuning the content message and the style of delivery, including translation and localization. Publisher – responsible for releasing the content for use. Administrator – responsible for managing access permissions to folders, collections and files, usually accomplished by assigning access rights to user groups or roles. Admins may also assist and support users in various ways. Consumer, viewer or guest – the person who reads or otherwise consumes the content after it is published or shared. A critical aspect of content management is the ability to manage versions of content as it evolves (see also version control). Authors and editors often need to restore older versions of edited products due to a process failure or an undesirable series of edits. Time-sensitive content may also require updates as the subject matter evolves over time. Another equally important aspect of content management involves the creation, maintenance, and application of review standards. Each member of the content creation and review process has a unique role and set of responsibilities in the development or publication of the content. Each review team member requires clear and concise review standards. These must be maintained on an ongoing basis to ensure the long-term consistency and health of the knowledge base. A content management system is a set of automated processes that may support the following features: Import and creation of documents and multimedia material Identification of all key users and their roles The ability to assign roles and responsibilities to different instances of content categories or types Definition of workflow tasks often coupled with messaging so that content managers are alerted to changes in content The ability to track and manage multiple versions of a single instance of content The ability to publish the content to a repository to support access The ability to personalize content based on a set of rules Increasingly, the repository is an inherent part of the system, and incorporates enterprise search and retrieval. Content management systems take the following forms: Web content management system—software for web site management (often what content management implicitly means) Output of a newspaper editorial staff organization Workflow for article publication Document management systems Knowledge management software Single source content management system—content stored in chunks within a relational database Variant management system—where personnel tag source content (usually text and graphics) to represent variants stored as single source "master" content modules, resolved to the desired variant at publication (for example: automobile owners manual content for 12 model years stored as single master content files and "called" by model year as needed)—often used in concert with database chunk storage (see above) for large content objects == Governance structures == Content management expert Marc Feldman defines three primary content management governance structures: localized, centralized, and federated—each having its unique strengths and weaknesses. === Localized governance === By putting control in the hands of those closest to the content, the context experts, localized governance models empower and unleash creativity. These benefits come, however, at the cost of a partial-to-total loss of managerial control and oversight. === Centralized governance === When the levers of control are strongly centralized, content management systems are capable of delivering an exceptionally clear and unified brand message. Moreover, centralized content management governance structures allow for a large number of cost-savings opportunities in large enterprises, realized, for example, through (1) the avoidance of duplicated efforts in creating, editing, formatting, repurposing and archiving content; (2) process management and the streamlining of all content related labor; and/or (3) an orderly deployment or updating of the content management system. === Federated governance === Federated governance models potentially realize the benefits of both localized and centralized control while avoiding the weaknesses of both. While content management software systems are inherently structured to enable federated governance models, realizing these benefits can be difficult because it requires, for example, negotiating the boundaries of control with local managers and content creators. In the case of larger enterprises, in particular, the failure to fully implement or realize a federated governance structure equates to a failure to realize the full return on investment and cost savings that content management systems enable. == Implementation == Content management implementations must be able to manage content distributions and digital rights in content life cycle. Content management systems are usually involved with digital rights management in order to control user access and digital rights. In this step, the read-only structures of digital rights management systems force some limitations on content management, as they do not allow authors to change protected content in their life cycle. Creating new content using managed (protected) content is also an issue that gets protected contents out of management controlling systems. A few content management implementations cover all these issues.
Read more →
Forking lemma

The forking lemma is any of a number of related lemmas in cryptography research. The lemma states that if an adversary (typically a probabilistic Turing machine), on inputs drawn from some distribution, produces an output that has some property with non-negligible probability, then with non-negligible probability, if the adversary is re-run on new inputs but with the same random tape, its second output will also have the property. This concept was first used by David Pointcheval and Jacques Stern in "Security proofs for signature schemes," published in the proceedings of Eurocrypt 1996. In their paper, the forking lemma is specified in terms of an adversary that attacks a digital signature scheme instantiated in the random oracle model. They show that if an adversary can forge a signature with non-negligible probability, then there is a non-negligible probability that the same adversary with the same random tape can create a second forgery in an attack with a different random oracle. The forking lemma was later generalized by Mihir Bellare and Gregory Neven. The forking lemma has been used and further generalized to prove the security of a variety of digital signature schemes and other random-oracle based cryptographic constructions. == Statement of the lemma == The generalized version of the lemma is stated as follows. Let A be a probabilistic algorithm, with inputs (x, h1, ..., hq; r) that outputs a pair (J, y), where r refers to the random tape of A (that is, the random choices A will make). Suppose further that IG is a probability distribution from which x is drawn, and that H is a set of size h from which each of the hi values are drawn according to the uniform distribution. Let acc be the probability that on inputs distributed as described, the J output by A is greater than or equal to 1. We can then define a "forking algorithm" FA that proceeds as follows, on input x: Pick a random tape r for A. Pick h1, ..., hq uniformly from H. Run A on input (x, h1, ..., hq; r) to produce (J, y). If J = 0, then return (0, 0, 0). Pick h'J, ..., h'q uniformly from H. Run A on input (x, h1, ..., hJ−1, h'J, ..., h'q; r) to produce (J', y'). If J' = J and hJ ≠ h'J then return (1, y, y'), otherwise, return (0, 0, 0). Let frk be the probability that FA outputs a triple starting with 1, given an input x chosen randomly from IG. Then frk ≥ acc ⋅ ( acc q − 1 h ) . {\displaystyle {\text{frk}}\geq {\text{acc}}\cdot \left({\frac {\text{acc}}{q}}-{\frac {1}{h}}\right).} === Intuition === The idea here is to think of A as running two times in related executions, where the process "forks" at a certain point, when some but not all of the input has been examined. In the alternate version, the remaining inputs are re-generated but are generated in the normal way. The point at which the process forks may be something we only want to decide later, possibly based on the behavior of A the first time around: this is why the lemma statement chooses the branching point (J) based on the output of A. The requirement that hJ ≠ h'J is a technical one required by many uses of the lemma. (Note that since both hJ and h'J are chosen randomly from H, then if h is large, as is usually the case, the probability of the two values not being distinct is extremely small.) === Example === For example, let A be an algorithm for breaking a digital signature scheme in the random oracle model. Then x would be the public parameters (including the public key) A is attacking, and hi would be the output of the random oracle on its ith distinct input. The forking lemma is of use when it would be possible, given two different random signatures of the same message, to solve some underlying hard problem. An adversary that forges once, however, gives rise to one that forges twice on the same message with non-negligible probability through the forking lemma. When A attempts to forge on a message m, we consider the output of A to be (J, y) where y is the forgery, and J is such that m was the Jth unique query to the random oracle (it may be assumed that A will query m at some point, if A is to be successful with non-negligible probability). (If A outputs an incorrect forgery, we consider the output to be (0, y).) By the forking lemma, the probability (frk) of obtaining two good forgeries y and y' on the same message but with different random oracle outputs (that is, with hJ ≠ h'J) is non-negligible when acc is also non-negligible. This allows us to prove that if the underlying hard problem is indeed hard, then no adversary can forge signatures. This is the essence of the proof given by Pointcheval and Stern for a modified ElGamal signature scheme against an adaptive adversary. == Known issues with application of forking lemma == The reduction provided by the forking lemma is not tight. Pointcheval and Stern proposed security arguments for Digital Signatures and Blind Signature using Forking Lemma. Claus P. Schnorr provided an attack on blind Schnorr signatures schemes, with more than p o l y l o g ( n ) {\displaystyle polylog(n)} concurrent executions (the case studied and proven secure by Pointcheval and Stern). A polynomial-time attack, for Ω ( n ) {\displaystyle \Omega (n)} concurrent executions, was shown in 2020 by Benhamouda, Lepoint, Raykova, and Orrù. Schnorr also suggested enhancements for securing blind signatures schemes based on discrete logarithm problem.
Read more →
Standard test image

A standard test image is a digital image file used across different institutions to test image processing and image compression algorithms. By using the same standard test images, different labs are able to compare results, both visually and quantitatively. The images are in many cases chosen to represent natural or typical images that a class of processing techniques would need to deal with. Other test images are chosen because they present a range of challenges to image reconstruction algorithms, such as the reproduction of fine detail and textures, sharp transitions and edges, and uniform regions. == Historical origins == Test images as transmission system calibration material probably date back to the original Paris to Lyon pantelegraph link. Analogue fax equipment (and photographic equipment for the printing trade) were the largest user groups of the standardized image for calibration technology until the coming of television and digital image transmission systems. == Common test image resolutions == The standard resolution of the images is usually 512×512 or 720×576. Most of these images are available as TIFF files from the University of Southern California's Signal and Image Processing Institute. Kodak has released 768×512 images, available as PNGs, that was originally on Photo CD with higher resolution, that are widely used for comparing image compression techniques.
Read more →
Plaintext

In cryptography, plaintext usually means unencrypted information pending input into cryptographic algorithms, usually encryption algorithms. This usually refers to data that is transmitted or stored unencrypted. == Overview == With the advent of computing, the term plaintext expanded beyond human-readable documents to mean any data, including binary files, in a form that can be viewed or used without requiring a key or other decryption device. Information—a message, document, file, etc.—if to be communicated or stored in an unencrypted form is referred to as plaintext. Plaintext is used as input to an encryption algorithm; the output is usually termed ciphertext, particularly when the algorithm is a cipher. Codetext is less often used, and almost always only when the algorithm involved is actually a code. Some systems use multiple layers of encryption, with the output of one encryption algorithm becoming "plaintext" input for the next. == Secure handling == Insecure handling of plaintext can introduce weaknesses into a cryptosystem by letting an attacker bypass the cryptography altogether. Plaintext is vulnerable in use and in storage, whether in electronic or paper format. Physical security means the securing of information and its storage media from physical, attack—for instance by someone entering a building to access papers, storage media, or computers. Discarded material, if not disposed of securely, may be a security risk. Even shredded documents and erased magnetic media might be reconstructed with sufficient effort. If plaintext is stored in a computer file, the storage media, the computer and its components, and all backups must be secure. Sensitive data is sometimes processed on computers whose mass storage is removable, in which case physical security of the removed disk is vital. In the case of securing a computer, useful (as opposed to handwaving) security must be physical (e.g., against burglary, brazen removal under cover of supposed repair, installation of covert monitoring devices, etc.), as well as virtual (e.g., operating system modification, illicit network access, Trojan programs). Wide availability of keydrives, which can plug into most modern computers and store large quantities of data, poses another severe security headache. A spy (perhaps posing as a cleaning person) could easily conceal one, and even swallow it if necessary. Discarded computers, disk drives and media are also a potential source of plaintexts. Most operating systems do not actually erase anything— they simply mark the disk space occupied by a deleted file as 'available for use', and remove its entry from the file system directory. The information in a file deleted in this way remains fully present until overwritten at some later time when the operating system reuses the disk space. With even low-end computers commonly sold with many gigabytes of disk space and rising monthly, this 'later time' may be months later, or never. Even overwriting the portion of a disk surface occupied by a deleted file is insufficient in many cases. Peter Gutmann of the University of Auckland wrote a celebrated 1996 paper on the recovery of overwritten information from magnetic disks; areal storage densities have gotten much higher since then, so this sort of recovery is likely to be more difficult than it was when Gutmann wrote. Modern hard drives automatically remap failing sectors, moving data to good sectors. This process makes information on those failing, excluded sectors invisible to the file system and normal applications. Special software, however, can still extract information from them. Some government agencies (e.g., US NSA) require that personnel physically pulverize discarded disk drives and, in some cases, treat them with chemical corrosives. This practice is not widespread outside government, however. Garfinkel and Shelat (2003) analyzed 158 second-hand hard drives they acquired at garage sales and the like, and found that less than 10% had been sufficiently sanitized. The others contained a wide variety of readable personal and confidential information. See data remanence. Physical loss is a serious problem. The US State Department, Department of Defense, and the British Secret Service have all had laptops with secret information, including in plaintext, lost or stolen. Appropriate disk encryption techniques can safeguard data on misappropriated computers or media. On occasion, even when data on host systems is encrypted, media that personnel use to transfer data between systems is plaintext because of poorly designed data policy. For example, in October 2007, HM Revenue and Customs lost CDs that contained the unencrypted records of 25 million child benefit recipients in the United Kingdom. Modern cryptographic systems resist known plaintext or even chosen plaintext attacks, and so may not be entirely compromised when plaintext is lost or stolen. Older systems resisted the effects of plaintext data loss on security with less effective techniques—such as padding and Russian copulation to obscure information in plaintext that could be easily guessed.
Read more →
Batch cryptography

Batch cryptography is a field of cryptology focused on the design of cryptographic protocols that perform operations—such as encryption, decryption, key exchange, and authentication—on multiple inputs simultaneously, rather than processing each input individually. Batching cryptographic operations can significantly reduce the marginal cost of handling individual inputs—a principle that was first introduced by Amos Fiat in 1989.
Read more →
Coreu

COREU (French: Correspondance Européenne – Telex network of European correspondents, also EUKOR-Netzwerk in Austria) is a communication network of the European Union for the communication of the Council of the European Union, the European correspondents of the foreign ministries of the EU member states, permanent representatives of member states in Brussels, the European Commission, and the General Secretariat of the Council of the European Union. The European Parliament is not among the participants. COREU is the European equivalent of the American Secret Internet Protocol Router Network (SIPRNet, also known as Intelink-S). COREU's official aim is fast communication in case of crisis. The network enables a closer cooperation in matters regarding foreign affairs. In actuality the system's function exceeds that of mere communication, it also enables decision-making. COREU's first goal is to enable the exchange of information before and after decisions. Relaying upfront negotiations in preparation of meetings is the second goal. In addition, the system also allows the editing of documents and the decision-making, especially if there is little time. While the first two goals are preparatory measures for a shared foreign policy, the third is a methodical variant marked by practise that is defining for the image of the Common Foreign and Security Policy. == Members == (The following information dates from 2013): There is one representative in each of the capital cities in the EU.(since 1973) In Germany for example, this is the European correspondent (EU-KOR) from the Foreign Office. In Austria it is the European correspondent from the Referat II.1.a in the Federal Ministry for Europe, Integration and Foreign Affairs They are the correspondents (since 1982) for the European Commission They comprise the secretariat for the European Council They also make up the European External Action Service (EEAS) (responsible for foreign policy issues, since 1987) == Data volume and technical details == COREU functions as a spoke-hub distribution paradigm system with the hub in Brussels. The network is operated by the European Union Intelligence and Situation Centre (formerly Joint Situation Center, JSC). The technical infrastructure is located in a building of the European Council. COREU may be described as an advanced telex system with encrypted messages via dedicated terminals. Once a message has reached the destination, it is then redistributed via the local media. In contrast, messages of governments are transmitted via local media to the correspondents and from there delivered point-to-point to Brussels via COREU. In 2010, approximately 8500 communications had been distributed over this network. == History == A telex-based communication system under the name COREU was established in 1973. Originally, only the ministries of Foreign Affairs in the European capitals were connected to it. This telex system was replaced in 1997 by the mail system CORTESY (COREU Terminal Equipment System). The name was retained despite the technical innovation. COREU was reportedly compromised by hackers working for the People's Liberation Army Strategic Support Force, allowing for the theft of thousands of low-classified documents and diplomatic cables.
Read more →
LumenVox

LumenVox is a privately held speech recognition software company based in San Diego, California. LumenVox has been described as one of the market leaders in the speech recognition software industry. == History == LumenVox was founded in 2001 as subsidiary of Progressive Computing. According to LumenVox CEO Edward Miller, when Progressive had initially looked to add speech recognition to its own phone system, it found the existing offerings too expensive and recognized a niche in the market for a more affordable speech recognition product. This led to the development of LumenVox with an aim to bring speech recognition to small-to-midsized businesses. LumenVox is one of the major providers of automatic speech recognition for telephone systems, and as of 2006, became the second largest provider of speech recognition software. == Products == The primary LumenVox product is the LumenVox Speech Engine. It is a speaker-independent automatic speech recognizer that uses the Speech Recognition Grammar Specification for building and defining grammars. It has been integrated with several of the major voice platforms, including Avaya Voice Portal/Interactive Response, Aculab, and BroadSoft's BroadWorks. The Speech Engine was originally derived from CMU Sphinx, but LumenVox has added considerable development effort to make it a commercial-ready product. LumenVox also offers a product called the Speech Tuner, which provides a graphical means of testing and troubleshooting speech recognition applications. == Open source support == LumenVox was recognized as one of the top VoIP companies in 2008 for its work in providing its offerings to the open source community, an effort by the company that began in 2006 when it partnered with Digium. At that time, Digium, maintainer of the open source Asterisk PBX, integrated the LumenVox Speech Engine into Asterisk. This made LumenVox the first commercially available speech recognition engine for Asterisk. As one of the earlier commercial software integrations with Asterisk, the LumenVox integration has been described as one of the applications that helped to mainstream Asterisk. In 2009, LumenVox also began offering access to the Speech Engine as a monthly subscription, bringing the cost of entry down even lower for open source users. LumenVox is also integrated with the open source UniMRCP project, which provides open source client and server libraries for the Media Resource Control Protocol.
Read more →
IWARP

iWARP is a computer networking protocol that implements remote direct memory access (RDMA) for efficient data transfer over Internet Protocol networks. Contrary to some accounts, iWARP is not an acronym. Because iWARP is layered on Internet Engineering Task Force (IETF)-standard congestion-aware protocols such as Transmission Control Protocol (TCP) and Stream Control Transmission Protocol (SCTP), it makes few requirements on the network, and can be successfully deployed in a broad range of environments. == History == In 2007, the IETF published five Request for Comments (RFCs) that define iWARP: RFC 5040 A Remote Direct Memory Access Protocol Specification is layered over Direct Data Placement Protocol (DDP). It defines how RDMA Send, Read, and Write operations are encoded using DDP into headers on the network. RFC 5041 Direct Data Placement over Reliable Transports is layered over MPA/TCP or SCTP. It defines how received data can be directly placed into an upper layer protocols receive buffer without intermediate buffers. RFC 5042 Direct Data Placement Protocol (DDP) / Remote Direct Memory Access Protocol (RDMAP) Security analyzes security issues related to iWARP DDP and RDMAP protocol layers. RFC 5043 Stream Control Transmission Protocol (SCTP) Direct Data Placement (DDP) Adaptation defines an adaptation layer that enables DDP over SCTP. RFC 5044 Marker PDU Aligned Framing for TCP Specification defines an adaptation layer that enables preservation of DDP-level protocol record boundaries layered over the TCP reliable connected byte stream. These RFCs are based on the RDMA Consortium's specifications for RDMA over TCP. The RDMA Consortium's specifications are influenced by earlier RDMA standards, including Virtual Interface Architecture (VIA) and InfiniBand (IB). Since 2007, the IETF has published three additional RFCs that maintain and extend iWARP: RFC 6580 IANA Registries for the Remote Direct Data Placement (RDDP) Protocols published in 2012 defines IANA registries for Remote Direct Data Placement (RDDP) error codes, operation codes, and function codes. RFC 6581 Enhanced Remote Direct Memory Access (RDMA) Connection Establishment published in 2011 fixes shortcomings with iWARP connection setup. RFC 7306 Remote Direct Memory Access (RDMA) Protocol Extensions published in 2014 extends RFC 5040 with atomic operations and RDMA Write with Immediate Data. == Protocol == The main component in the iWARP protocol is the Direct Data Placement Protocol (DDP), which permits the actual zero-copy transmission. DDP itself does not perform the transmission; the underlying protocol (TCP or SCTP) does. However, TCP does not respect message boundaries; it sends data as a sequence of bytes without regard to protocol data units (PDU). In this regard, DDP itself may be better suited for SCTP, and indeed the IETF proposed a standard RDMA over SCTP. To run DDP over TCP requires a tweak known as marker PDU aligned (MPA) framing to guarantee boundaries of messages. Furthermore, DDP is not intended to be accessed directly. Instead, a separate RDMA protocol (RDMAP) provides the services to read and write data. Therefore, the entire RDMA over TCP specification is really RDMAP over DDP over either MPA/TCP or SCTP. All of these protocols can be implemented in hardware. Unlike IB, iWARP only has reliable connected communication, as this is the only service that TCP and SCTP provide. The iWARP specification omits other features of IB, such as Send with Immediate Data operations. With RFC 7306, the IETF is working to reduce these omissions. == Implementation == Because a kernel implementation of the TCP stack can be seen as a bottleneck, the protocol is typically implemented in hardware RDMA network interface controllers (rNICs). As simple data losses are rare in tightly coupled network environments, the error-correction mechanisms of TCP may be performed by software while the more frequently performed communications are handled strictly by logic embedded on the rNIC. Similarly, connections are often established entirely by software and then handed off to the hardware. Furthermore, the handling of iWARP specific protocol details is typically isolated from the TCP implementation, allowing rNICs to be used for both as RDMA offload and TCP offload (in support of traditional sockets based TCP/IP applications). The portion of the hardware implementation used for implementing the TCP protocol is known as the TCP Offload Engine (TOE). TOE itself does not prevent copying on the reception side, and must be combined with RDMA hardware for zero-copy results. The RDMA / TCP specification is a set of different wire protocols intended to be implemented in hardware (though it seems feasible to emulate it in software for compatibility but without the performance benefits). == Interfaces == iWARP is a protocol, not an implementation, but defines protocol behavior in terms of the operations that are legal for the protocol, known as Verbs. As such, iWARP does not have any single standard programming interface. However, programming interfaces tend to very closely correspond to the Verbs. Several programmatic interfaces have been proposed, including OpenFabrics Verbs, Network Direct, uDAPL, kDAPL, IT-API, and RNICPI. Implementations of some of these interfaces are available for different platforms, including Windows and Linux. == Services available == Networking services implemented over iWARP include those offered in the OpenFabrics Enterprise Distribution (OFED) by the OpenFabrics Alliance for Linux operating systems, and by Microsoft Windows via Network Direct. NVMe over Fabrics (NVMEoF) iSCSI Extensions for RDMA (iSER) Server Message Block Direct (SMB Direct) Sockets Direct Protocol (SDP) SCSI RDMA Protocol (SRP) Network File System over RDMA (NFS over RDMA) GPUDirect
Read more →
Data Transformation Services

Data Transformation Services (DTS) is a Microsoft database tool with a set of objects and utilities to allow the automation of extract, transform and load operations to or from a database. The objects are DTS packages and their components, and the utilities are called DTS tools. DTS was included with earlier versions of Microsoft SQL Server, and was almost always used with SQL Server databases, although it could be used independently with other databases. DTS allows data to be transformed and loaded from heterogeneous sources using OLE DB, ODBC, or text-only files, into any supported database. DTS can also allow automation of data import or transformation on a scheduled basis, and can perform additional functions such as FTPing files and executing external programs. In addition, DTS provides an alternative method of version control and backup for packages when used in conjunction with a version control system, such as Microsoft Visual SourceSafe. DTS has been superseded by SQL Server Integration Services in later releases of Microsoft SQL Server though there was some backwards compatibility and ability to run DTS packages in the new SSIS for a time. == History == In SQL Server versions 6.5 and earlier, database administrators (DBAs) used SQL Server Transfer Manager and Bulk Copy Program, included with SQL Server, to transfer data. These tools had significant shortcomings, and many DBAs used third-party tools such as Pervasive Data Integrator to transfer data more flexibly and easily. With the release of SQL Server 7 in 1998, "Data Transformation Services" was packaged with it to replace all these tools. The concept, design, and implementation of the Data Transformation Services was led by Stewart P. MacLeod (SQL Server Development Group Program Manager), Vij Rajarajan (SQL Server Lead Developer), and Ted Hart (SQL Server Lead Developer). The goal was to make it easier to import, export, and transform heterogeneous data and simplify the creation of data warehouses from operational data sources. SQL Server 2000 expanded DTS functionality in several ways. It introduced new types of tasks, including the ability to FTP files, move databases or database components, and add messages into Microsoft Message Queue. DTS packages can be saved as a Visual Basic file in SQL Server 2000, and this can be expanded to save into any COM-compliant language. Microsoft also integrated packages into Windows 2000 security and made DTS tools more user-friendly; tasks can accept input and output parameters. DTS comes with all editions of SQL Server 7 and 2000, but was superseded by SQL Server Integration Services in the Microsoft SQL Server 2005 release in 2005. == DTS packages == The DTS package is the fundamental logical component of DTS; every DTS object is a child component of the package. Packages are used whenever one modifies data using DTS. All the metadata about the data transformation is contained within the package. Packages can be saved directly in a SQL Server, or can be saved in the Microsoft Repository or in COM files. SQL Server 2000 also allows a programmer to save packages in a Visual Basic or other language file (when stored to a VB file, the package is actually scripted—that is, a VB script is executed to dynamically create the package objects and its component objects). A package can contain any number of connection objects, but does not have to contain any. These allow the package to read data from any OLE DB-compliant data source, and can be expanded to handle other sorts of data. The functionality of a package is organized into tasks and steps. A DTS Task is a discrete set of functionalities executed as a single step in a DTS package. Each task defines a work item to be performed as part of the data movement and data transformation process or as a job to be executed. Data Transformation Services supplies a number of tasks that are part of the DTS object model and that can be accessed graphically through the DTS Designer or accessed programmatically. These tasks, which can be configured individually, cover a wide variety of data copying, data transformation and notification situations. For example, the following types of tasks represent some actions that you can perform by using DTS: executing a single SQL statement, sending an email, and transferring a file with FTP. A step within a DTS package describes the order in which tasks are run and the precedence constraints that describe what to do in the case damage or of failure. These steps can be executed sequentially or in parallel. Packages can also contain global variables which can be used throughout the package. SQL Server 2000 allows input and output parameters for tasks, greatly expanding the usefulness of global variables. DTS packages can be edited, password protected, scheduled for execution, and retrieved by version. == DTS tools == DTS tools packaged with SQL Server include the DTS wizards, DTS Designer, and DTS Programming Interfaces. === DTS wizards === The DTS wizards can be used to perform simple or common DTS tasks. These include the Import/Export Wizard and the Copy of Database Wizard. They provide the simplest method of copying data between OLE DB data sources. There is a great deal of functionality that is not available by merely using a wizard. However, a package created with a wizard can be saved and later altered with one of the other DTS tools. A Create Publishing Wizard is also available to schedule packages to run at certain times. This only works if SQL Server Agent is running; otherwise the package will be scheduled, but will not be executed. === DTS Designer === The DTS Designer is a graphical tool used to build complex DTS Packages with workflows and event-driven logic. DTS Designer can also be used to edit and customize DTS Packages created with the DTS wizard. Each connection and task in DTS Designer is shown with a specific icon. These icons are joined with precedence constraints, which specify the order and requirements for tasks to be run. One task may run, for instance, only if another task succeeds (or fails). Other tasks may run concurrently. The DTS Designer has been criticized for having unusual quirks and limitations, such as the inability to visually copy and paste multiple tasks at one time. Many of these shortcomings have been overcome in SQL Server Integration Services, DTS's successor. === DTS Query Designer === A graphical tool used to build queries in DTS. === DTS Run Utility === DTS Packages can be run from the command line using the DTSRUN Utility. The utility is invoked using the following syntax: dtsrun /S server_name[\instance_name] { {/[~]U user_name [/[~]P password]} | /E } ] { {/[~]N package_name } | {/[~]G package_guid_string} | {/[~]V package_version_guid_string} } [/[~]M package_password] [/[~]F filename] [/[~]R repository_database_name] [/A global_variable_name:typeid=value] [/L log_file_name] [/W NT_event_log_completion_status] [/Z] [/!X] [/!D] [/!Y] [/!C] ] When passing in parameters which are mapped to Global Variables, you are required to include the typeid. This is rather difficult to find on the Microsoft site. Below are the TypeIds used in passing in these values.
Read more →