AI App Kisne Banaya

AI App Kisne Banaya — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Ware report

    Ware report

    Security Controls for Computer Systems, commonly called the Ware report, is a 1970 text by Willis Ware that was foundational in the field of computer security. == Development == A defense contractor in St. Louis, Missouri, had bought an IBM mainframe computer, which it was using for classified work on a fighter aircraft. To provide additional income, the contractor asked the Department of Defense (DoD) for permission to sell computer time on the mainframe to local businesses via remote terminals, while the classified work continued. At the time, the DoD did not have a policy to cover this. The DoD's Advanced Research Projects Agency (DARPA) asked Ware - a RAND employee - to chair a committee to examine and report on the feasibility of security controls for computer systems. The committee's report was a classified document given in January 1970 to the Defense Science Board (DSB), which had taken over the project from ARPA. After declassification, the report was published by RAND in October 1979. == Influence == The IEEE Computer Society said the report was widely circulated, and the IEEE Annals of the History of Computing said that it, together with Ware's 1967 Spring Joint Computer Conference session, marked the start of the field of computer security. The report influenced security certification standards and processes, especially in the banking and defense industries, where the report was instrumental in creating the Orange Book.

    Read more →
  • Strong cryptography

    Strong cryptography

    Strong cryptography or cryptographically strong are general terms used to designate the cryptographic algorithms that, when used correctly, provide a very high (usually insurmountable) level of protection against any eavesdropper, including the government agencies. There is no precise definition of the boundary line between the strong cryptography and (breakable) weak cryptography, as this border constantly shifts due to improvements in hardware and cryptanalysis techniques. These improvements eventually place the capabilities once available only to the NSA within the reach of a skilled individual, so in practice there are only two levels of cryptographic security, "cryptography that will stop your kid sister from reading your files, and cryptography that will stop major governments from reading your files" (Bruce Schneier). The strong cryptography algorithms have high security strength, for practical purposes usually defined as a number of bits in the key. For example, the United States government, when dealing with export control of encryption, considered as of 1999 any implementation of the symmetric encryption algorithm with the key length above 56 bits or its public key equivalent to be strong and thus potentially a subject to the export licensing. To be strong, an algorithm needs to have a sufficiently long key and be free of known mathematical weaknesses, as exploitation of these effectively reduces the key size. At the beginning of the 21st century, the typical security strength of the strong symmetrical encryption algorithms is 128 bits (slightly lower values still can be strong, but usually there is little technical gain in using smaller key sizes). Demonstrating the resistance of any cryptographic scheme to attack is a complex matter, requiring extensive testing and reviews, preferably in a public forum. Good algorithms and protocols are required (similarly, good materials are required to construct a strong building), but good system design and implementation is needed as well: "it is possible to build a cryptographically weak system using strong algorithms and protocols" (just like the use of good materials in construction does not guarantee a solid structure). Many real-life systems turn out to be weak when the strong cryptography is not used properly, for example, random nonces are reused A successful attack might not even involve algorithm at all, for example, if the key is generated from a password, guessing a weak password is easy and does not depend on the strength of the cryptographic primitives. A user can become the weakest link in the overall picture, for example, by sharing passwords and hardware tokens with the colleagues. == Background == The level of expense required for strong cryptography originally restricted its use to the government and military agencies, until the middle of the 20th century the process of encryption required a lot of human labor and errors (preventing the decryption) were very common, so only a small share of written information could have been encrypted. US government, in particular, was able to keep a monopoly on the development and use of cryptography in the US into the 1960s. In the 1970, the increased availability of powerful computers and unclassified research breakthroughs (Data Encryption Standard, the Diffie-Hellman and RSA algorithms) made strong cryptography available for civilian use. Mid-1990s saw the worldwide proliferation of knowledge and tools for strong cryptography. By the 21st century the technical limitations were gone, although the majority of the communication were still unencrypted. At the same the cost of building and running systems with strong cryptography became roughly the same as the one for the weak cryptography. The use of computers changed the process of cryptanalysis, famously with Bletchley Park's Colossus. But just as the development of digital computers and electronics helped in cryptanalysis, it also made possible much more complex ciphers. It is typically the case that use of a quality cipher is very efficient, while breaking it requires an effort many orders of magnitude larger - making cryptanalysis so inefficient and impractical as to be effectively impossible. == Cryptographically strong algorithms == This term "cryptographically strong" is often used to describe an encryption algorithm, and implies, in comparison to some other algorithm (which is thus cryptographically weak), greater resistance to attack. But it can also be used to describe hashing and unique identifier and filename creation algorithms. See for example the description of the Microsoft .NET runtime library function Path.GetRandomFileName. In this usage, the term means "difficult to guess". An encryption algorithm is intended to be unbreakable (in which case it is as strong as it can ever be), but might be breakable (in which case it is as weak as it can ever be) so there is not, in principle, a continuum of strength as the idiom would seem to imply: Algorithm A is stronger than Algorithm B which is stronger than Algorithm C, and so on. The situation is made more complex, and less subsumable into a single strength metric, by the fact that there are many types of cryptanalytic attack and that any given algorithm is likely to force the attacker to do more work to break it when using one attack than another. There is only one known unbreakable cryptographic system, the one-time pad, which is not generally possible to use because of the difficulties involved in exchanging one-time pads without them being compromised. So any encryption algorithm can be compared to the perfect algorithm, the one-time pad. The usual sense in which this term is (loosely) used, is in reference to a particular attack, brute force key search — especially in explanations for newcomers to the field. Indeed, with this attack (always assuming keys to have been randomly chosen), there is a continuum of resistance depending on the length of the key used. But even so there are two major problems: many algorithms allow use of different length keys at different times, and any algorithm can forgo use of the full key length possible. Thus, Blowfish and RC5 are block cipher algorithms whose design specifically allowed for several key lengths, and who cannot therefore be said to have any particular strength with respect to brute force key search. Furthermore, US export regulations restrict key length for exportable cryptographic products and in several cases in the 1980s and 1990s (e.g., famously in the case of Lotus Notes' export approval) only partial keys were used, decreasing 'strength' against brute force attack for those (export) versions. More or less the same thing happened outside the US as well, as for example in the case of more than one of the cryptographic algorithms in the GSM cellular telephone standard. The term is commonly used to convey that some algorithm is suitable for some task in cryptography or information security, but also resists cryptanalysis and has no, or fewer, security weaknesses. Tasks are varied, and might include: generating randomness encrypting data providing a method to ensure data integrity Cryptographically strong would seem to mean that the described method has some kind of maturity, perhaps even approved for use against different kinds of systematic attacks in theory and/or practice. Indeed, that the method may resist those attacks long enough to protect the information carried (and what stands behind the information) for a useful length of time. But due to the complexity and subtlety of the field, neither is almost ever the case. Since such assurances are not actually available in real practice, sleight of hand in language which implies that they are will generally be misleading. There will always be uncertainty as advances (e.g., in cryptanalytic theory or merely affordable computer capacity) may reduce the effort needed to successfully use some attack method against an algorithm. In addition, actual use of cryptographic algorithms requires their encapsulation in a cryptosystem, and doing so often introduces vulnerabilities which are not due to faults in an algorithm. For example, essentially all algorithms require random choice of keys, and any cryptosystem which does not provide such keys will be subject to attack regardless of any attack resistant qualities of the encryption algorithm(s) used. == Legal issues == Widespread use of encryption increases the costs of surveillance, so the government policies aim to regulate the use of the strong cryptography. In the 2000s, the effect of encryption on the surveillance capabilities was limited by the ever-increasing share of communications going through the global social media platforms, that did not use the strong encryption and provided governments with the requested data. Murphy talks about a legislative balance that needs to be struck between the power of the government that are broad enough to be able to follow the qui

    Read more →
  • Strong cryptography

    Strong cryptography

    Strong cryptography or cryptographically strong are general terms used to designate the cryptographic algorithms that, when used correctly, provide a very high (usually insurmountable) level of protection against any eavesdropper, including the government agencies. There is no precise definition of the boundary line between the strong cryptography and (breakable) weak cryptography, as this border constantly shifts due to improvements in hardware and cryptanalysis techniques. These improvements eventually place the capabilities once available only to the NSA within the reach of a skilled individual, so in practice there are only two levels of cryptographic security, "cryptography that will stop your kid sister from reading your files, and cryptography that will stop major governments from reading your files" (Bruce Schneier). The strong cryptography algorithms have high security strength, for practical purposes usually defined as a number of bits in the key. For example, the United States government, when dealing with export control of encryption, considered as of 1999 any implementation of the symmetric encryption algorithm with the key length above 56 bits or its public key equivalent to be strong and thus potentially a subject to the export licensing. To be strong, an algorithm needs to have a sufficiently long key and be free of known mathematical weaknesses, as exploitation of these effectively reduces the key size. At the beginning of the 21st century, the typical security strength of the strong symmetrical encryption algorithms is 128 bits (slightly lower values still can be strong, but usually there is little technical gain in using smaller key sizes). Demonstrating the resistance of any cryptographic scheme to attack is a complex matter, requiring extensive testing and reviews, preferably in a public forum. Good algorithms and protocols are required (similarly, good materials are required to construct a strong building), but good system design and implementation is needed as well: "it is possible to build a cryptographically weak system using strong algorithms and protocols" (just like the use of good materials in construction does not guarantee a solid structure). Many real-life systems turn out to be weak when the strong cryptography is not used properly, for example, random nonces are reused A successful attack might not even involve algorithm at all, for example, if the key is generated from a password, guessing a weak password is easy and does not depend on the strength of the cryptographic primitives. A user can become the weakest link in the overall picture, for example, by sharing passwords and hardware tokens with the colleagues. == Background == The level of expense required for strong cryptography originally restricted its use to the government and military agencies, until the middle of the 20th century the process of encryption required a lot of human labor and errors (preventing the decryption) were very common, so only a small share of written information could have been encrypted. US government, in particular, was able to keep a monopoly on the development and use of cryptography in the US into the 1960s. In the 1970, the increased availability of powerful computers and unclassified research breakthroughs (Data Encryption Standard, the Diffie-Hellman and RSA algorithms) made strong cryptography available for civilian use. Mid-1990s saw the worldwide proliferation of knowledge and tools for strong cryptography. By the 21st century the technical limitations were gone, although the majority of the communication were still unencrypted. At the same the cost of building and running systems with strong cryptography became roughly the same as the one for the weak cryptography. The use of computers changed the process of cryptanalysis, famously with Bletchley Park's Colossus. But just as the development of digital computers and electronics helped in cryptanalysis, it also made possible much more complex ciphers. It is typically the case that use of a quality cipher is very efficient, while breaking it requires an effort many orders of magnitude larger - making cryptanalysis so inefficient and impractical as to be effectively impossible. == Cryptographically strong algorithms == This term "cryptographically strong" is often used to describe an encryption algorithm, and implies, in comparison to some other algorithm (which is thus cryptographically weak), greater resistance to attack. But it can also be used to describe hashing and unique identifier and filename creation algorithms. See for example the description of the Microsoft .NET runtime library function Path.GetRandomFileName. In this usage, the term means "difficult to guess". An encryption algorithm is intended to be unbreakable (in which case it is as strong as it can ever be), but might be breakable (in which case it is as weak as it can ever be) so there is not, in principle, a continuum of strength as the idiom would seem to imply: Algorithm A is stronger than Algorithm B which is stronger than Algorithm C, and so on. The situation is made more complex, and less subsumable into a single strength metric, by the fact that there are many types of cryptanalytic attack and that any given algorithm is likely to force the attacker to do more work to break it when using one attack than another. There is only one known unbreakable cryptographic system, the one-time pad, which is not generally possible to use because of the difficulties involved in exchanging one-time pads without them being compromised. So any encryption algorithm can be compared to the perfect algorithm, the one-time pad. The usual sense in which this term is (loosely) used, is in reference to a particular attack, brute force key search — especially in explanations for newcomers to the field. Indeed, with this attack (always assuming keys to have been randomly chosen), there is a continuum of resistance depending on the length of the key used. But even so there are two major problems: many algorithms allow use of different length keys at different times, and any algorithm can forgo use of the full key length possible. Thus, Blowfish and RC5 are block cipher algorithms whose design specifically allowed for several key lengths, and who cannot therefore be said to have any particular strength with respect to brute force key search. Furthermore, US export regulations restrict key length for exportable cryptographic products and in several cases in the 1980s and 1990s (e.g., famously in the case of Lotus Notes' export approval) only partial keys were used, decreasing 'strength' against brute force attack for those (export) versions. More or less the same thing happened outside the US as well, as for example in the case of more than one of the cryptographic algorithms in the GSM cellular telephone standard. The term is commonly used to convey that some algorithm is suitable for some task in cryptography or information security, but also resists cryptanalysis and has no, or fewer, security weaknesses. Tasks are varied, and might include: generating randomness encrypting data providing a method to ensure data integrity Cryptographically strong would seem to mean that the described method has some kind of maturity, perhaps even approved for use against different kinds of systematic attacks in theory and/or practice. Indeed, that the method may resist those attacks long enough to protect the information carried (and what stands behind the information) for a useful length of time. But due to the complexity and subtlety of the field, neither is almost ever the case. Since such assurances are not actually available in real practice, sleight of hand in language which implies that they are will generally be misleading. There will always be uncertainty as advances (e.g., in cryptanalytic theory or merely affordable computer capacity) may reduce the effort needed to successfully use some attack method against an algorithm. In addition, actual use of cryptographic algorithms requires their encapsulation in a cryptosystem, and doing so often introduces vulnerabilities which are not due to faults in an algorithm. For example, essentially all algorithms require random choice of keys, and any cryptosystem which does not provide such keys will be subject to attack regardless of any attack resistant qualities of the encryption algorithm(s) used. == Legal issues == Widespread use of encryption increases the costs of surveillance, so the government policies aim to regulate the use of the strong cryptography. In the 2000s, the effect of encryption on the surveillance capabilities was limited by the ever-increasing share of communications going through the global social media platforms, that did not use the strong encryption and provided governments with the requested data. Murphy talks about a legislative balance that needs to be struck between the power of the government that are broad enough to be able to follow the qui

    Read more →
  • Key Transparency

    Key Transparency

    Key Transparency allows communicating parties to verify public keys used in end-to-end encryption. In many end-to-end encryption services, to initiate communication a user will reach out to a central server and request the public keys of the user with which they wish to communicate. If the central server is malicious or becomes compromised, a man-in-the-middle attack can be launched through the issuance of incorrect public keys. The communications can then be intercepted and manipulated. Additionally, legal pressure could be applied by surveillance agencies to manipulate public keys and read messages. With Key Transparency, public keys are posted to a public log that can be universally audited. Communicating parties can verify public keys used are accurate.

    Read more →
  • Distinguishable interfaces

    Distinguishable interfaces

    Distinguishable interfaces use computer graphic principles to automatically generate easily distinguishable appearance for computer data. Although the desktop metaphor revolutionized user interfaces, there is evidence that a spatial layout alone does little to help in locating files and other data; distinguishable appearance is also required. Studies have shown that average users have considerable difficulty finding files on their personal computers, even ones that they created the same day. Search engines do not always help, since it has been found that users often know of the existence of a file without being able to specify relevant search terms. On the contrary, people appear to incrementally search for files using some form of context. Recently researchers and web developers have argued that the problem is the lack of distinguishable appearance: in the traditional computer interface most objects and locations appear identical. This problem rarely occurs in the real world, where both objects and locations generally have easily distinguishable appearance. Discriminability was one of the recommendations in the ISO 9241-12 recommendation on presentation of information on visual displays (part of the overall report on Ergonomics of Human System Interaction), however it was assumed in that report that this would be achieved by manual design of graphical symbols. == VisualIDs, semanticons, and identicons == The mass availability of computer graphics supported the introduction of approaches that make better use of the brain's "visual hardware", by providing individual files and other abstract data with distinguishable appearance. This idea initially appeared in strictly academic VisualIDs and Semanticons works, but the web community has explored and rapidly adopted similar ideas, such as the Identicon. The VisualIDs project automatically generated icons for files or other data based on a hash of the data identifier, so the icons had no relation to the content or meaning of the data. It was argued not only that generating meaningful icons is unnecessary (their user study showed rapid learning of the arbitrary icons), but also that basing icons on content is actually incorrect ("contrasting visualization with visual identifiers"). The Semanticons project developed by Setlur et al. demonstrated an algorithm to create icons that reflect the content of files. In this work the name, location and content of a file are parsed and used to retrieve related image(s) from an image database. These are then processed using a Non-photorealistic rendering technique in order to generate graphical icons. Developer Don Park introduced the identicon library for making a visual icon from a hash of a data identifier. This initial public implementation has spawned a large number of implementations for various environments. In particular, identicons are now being used as default visual user identifiers (avatars) for several widely used systems. They are also used as a complement to Gravatars, which are pre-existing avatar images created or chosen by users, instead of automatically generated images. (see #External links). == Current research == While current web practice has followed the semantics-free approach of VisualIDs, recent research has followed the semantics-based approach of Semanticons. Examples include using data mining principles to automatically create "intelligent icons" that reflect the contents of files and creating icons for music files that reflect audio characteristics or affective content.

    Read more →
  • Ciphertext

    Ciphertext

    In cryptography, ciphertext or cyphertext is the result of encryption performed on plaintext using an algorithm, called a cipher. Ciphertext is also known as encrypted or encoded information because it contains a form of the original plaintext that is unreadable by a human or computer without the proper cipher to decrypt it. This process prevents the loss of sensitive information via hacking. Decryption, the inverse of encryption, is the process of turning ciphertext into readable plaintext. Ciphertext is not to be confused with codetext, because the latter is a result of a code, not a cipher. == Conceptual underpinnings == Let m {\displaystyle m\!} be the plaintext message that Alice wants to secretly transmit to Bob and let E k {\displaystyle E_{k}\!} be the encryption cipher, where k {\displaystyle _{k}\!} is a cryptographic key. Alice must first transform the plaintext into ciphertext, c {\displaystyle c\!} , in order to securely send the message to Bob, as follows: c = E k ( m ) . {\displaystyle c=E_{k}(m).\!} In a symmetric-key system, Bob knows Alice's encryption key. Once the message is encrypted, Alice can safely transmit it to Bob (assuming no one else knows the key). In order to read Alice's message, Bob must decrypt the ciphertext using E k − 1 {\displaystyle {E_{k}}^{-1}\!} which is known as the decryption cipher, D k : {\displaystyle D_{k}:\!} D k ( c ) = D k ( E k ( m ) ) = m . {\displaystyle D_{k}(c)=D_{k}(E_{k}(m))=m.\!} Alternatively, in a non-symmetric key system, everyone, not just Alice and Bob, knows the encryption key; but the decryption key cannot be inferred from the encryption key. Only Bob knows the decryption key D k , {\displaystyle D_{k},} and decryption proceeds as D k ( c ) = m . {\displaystyle D_{k}(c)=m.} == Types of ciphers == The history of cryptography began thousands of years ago. Cryptography uses a variety of different types of encryption. Earlier algorithms were performed by hand and are substantially different from modern algorithms, which are generally executed by a machine. === Historical ciphers === Historical pen and paper ciphers used in the past are sometimes known as classical ciphers. They include: Substitution cipher: the units of plaintext are replaced with ciphertext (e.g., Caesar cipher and one-time pad) Polyalphabetic substitution cipher: a substitution cipher using multiple substitution alphabets (e.g., Vigenère cipher and Enigma machine) Polygraphic substitution cipher: the unit of substitution is a sequence of two or more letters rather than just one (e.g., Playfair cipher) Transposition cipher: the ciphertext is a permutation of the plaintext (e.g., rail fence cipher) Historical ciphers are not generally used as a standalone encryption technique because they are quite easy to crack. Many of the classical ciphers, with the exception of the one-time pad, can be cracked using brute force. === Modern ciphers === Modern ciphers are more secure than classical ciphers and are designed to withstand a wide range of attacks. An attacker should not be able to find the key used in a modern cipher, even if they know any specifics about the plaintext and its corresponding ciphertext. Modern encryption methods can be divided into the following categories: Private-key cryptography (symmetric key algorithm): one shared key is used for encryption and decryption Public-key cryptography (asymmetric key algorithm): two different keys are used for encryption and decryption In a symmetric key algorithm (e.g., DES, AES), the sender and receiver have a shared key established in advance: the sender uses the shared key to perform encryption; the receiver uses the shared key to perform decryption. Symmetric key algorithms can either be block ciphers or stream ciphers. Block ciphers operate on fixed-length groups of bits, called blocks, with an unvarying transformation. Stream ciphers encrypt plaintext digits one at a time on a continuous stream of data, with the transformation of successive digits varying during the encryption process. In an asymmetric key algorithm (e.g., RSA), there are two different keys: a public key and a private key. The public key is published, thereby allowing any sender to perform encryption. The private key is kept secret by the receiver, thereby allowing only the receiver to correctly perform decryption. == Cryptanalysis == Cryptanalysis (also referred to as codebreaking or cracking the code) is the study of applying various methodologies to obtain the meaning of encrypted information, without having access to the cipher required to correctly decrypt the information. This typically involves gaining an understanding of the system design and determining the cipher. Cryptanalysts can follow one or more attack models to crack a cipher, depending upon what information is available and the type of cipher being analyzed. Ciphertext is generally the most easily obtained part of a cryptosystem and therefore is an important part of cryptanalysis. === Attack models === Ciphertext-only: the cryptanalyst has access only to a collection of ciphertexts or code texts. This is the weakest attack model because the cryptanalyst has limited information. Modern ciphers rarely fail under this attack. Known-plaintext: the attacker has a set of ciphertexts to which they know the corresponding plaintext Chosen-plaintext attack: the attacker can obtain the ciphertexts corresponding to an arbitrary set of plaintexts of their own choosing Batch chosen-plaintext attack: where the cryptanalyst chooses all plaintexts before any of them are encrypted. This is often the meaning of an unqualified use of "chosen-plaintext attack". Adaptive chosen-plaintext attack: where the cryptanalyst makes a series of interactive queries, choosing subsequent plaintexts based on the information from the previous encryptions. Chosen-ciphertext attack: the attacker can obtain the plaintexts corresponding to an arbitrary set of ciphertexts of their own choosing Adaptive chosen-ciphertext attack Indifferent chosen-ciphertext attack Related-key attack: similar to a chosen-plaintext attack, except the attacker can obtain ciphertexts encrypted under two different keys. The keys are unknown, but the relationship between them is known (e.g., two keys that differ in the one bit). == Famous ciphertexts == The Babington Plot ciphers The Shugborough inscription The Zimmermann Telegram The Magic Words are Squeamish Ossifrage The cryptogram in "The Gold-Bug" Beale ciphers Kryptos Zodiac Killer ciphers

    Read more →
  • Manufacturing Automation Protocol

    Manufacturing Automation Protocol

    Manufacturing Automation Protocol (MAP) was a computer network standard released in 1982 for interconnection of devices from multiple manufacturers. It was developed by General Motors to combat the proliferation of incompatible communications standards used by suppliers of automation products such as programmable controllers. By 1985 demonstrations of interoperability were carried out and 21 vendors offered MAP products. In 1986 the Boeing corporation merged its Technical Office Protocol with the MAP standard, and the combined standard was referred to as "MAP/TOP". The standard was revised several times between the first issue in 1982 and MAP 3.0 in 1987, with significant technical changes that made interoperation between different revisions of the standard difficult. Although promoted and used by manufacturers such as General Motors, Boeing, and others, it lost market share to the contemporary Ethernet standard and was not widely adopted. Difficulties included changing protocol specifications, the expense of MAP interface links, and the speed penalty of a token-passing network. The token bus network protocol used by MAP became standardized as IEEE standard 802.4 but this committee disbanded in 2004 due to lack of industry attention.

    Read more →
  • Eduroam

    Eduroam

    eduroam (a portmanteau of education and roaming) is an international Wi-Fi internet access roaming service for users in research, higher education and further education. It provides researchers, teachers, and students network access when visiting an institution other than their own. Users are authenticated with credentials from their home institution, regardless of the location of the eduroam access point. Authorization to access the Internet and other resources are handled by the visited institution. Users do not have to pay to use eduroam. In some countries, Internet access via eduroam is also available at other locations than the participating institutions, e.g. in libraries, public buildings, railway stations, city centres and airports. It is also available at many primary and secondary education institutions in Brazil and the US. == History == The eduroam initiative started in 2002 when during the preparations for the creation of TERENA's task force TF-Mobility, Klaas Wierenga of SURFnet shared the idea of combining a RADIUS-based infrastructure with IEEE 802.1X technology to provide roaming network access across research and education networks. Initially, the service was joined by institutions in the Netherlands, Germany, Finland, Portugal, Croatia and the United Kingdom. Later, other NRENs in Europe embraced the idea and started joining the infrastructure, which was then called eduroam. Since 2004, the European Union co-funded further research and development work related to the eduroam service through the GN2 and GN3 projects. From September 2007, the European Union also funded through these projects the continued operation and maintenance of the eduroam service at the European level. The first non-European country to join eduroam was Australia, in December 2004. In Canada, eduroam started as an initiative of the University of British Columbia, which was later taken over by CANARIE as a service of its Canadian Access Federation. In the United States, eduroam was initially a pilot project between the National Science Foundation and the University of Tennessee (UTK). In 2012, Internet2 announced the addition of eduroam to its NET+ service offerings. AnyRoam LLC, a private company, was formed by former UTK staff to serve as an Internet2 active corporate member administering the US top-level servers. In 2021, Internet2 assumed direct management of the eduroam service for US-based organizations. == Technology == The eduroam service uses IEEE 802.1X as the authentication method and a hierarchical system of RADIUS servers. The hierarchy typically consists of RADIUS servers at the participating institutions, national RADIUS servers run by the National Roaming Operators, and regional top-level RADIUS servers for individual world regions. In some cases, institutions contact each other directly via DNS lookups () When a user visits a remote institution, the user's device presents their credentials to the local RADIUS server. That RADIUS server discovers that it is not responsible for the realm of the user's home institution and proxies the access request to another RADIUS server, typically the national RADIUS server. If the visited institution is in a different country than the home institution, the request is in turn proxied to the regional top-level RADIUS server, and then to the national RADIUS server of the user's home country. That national server forwards the credentials to the home institution, where they are verified. The RADIUS response travels back over the proxy-hierarchy to the visited institution and the user is granted access. In eduroam, the user credentials are always presented in the form of an EAP method (). The EAP method is responsible for ensuring that the users credentials are secure, and private. The users credentials can then travel via a number of intermediate servers, not under the control of the home institution of the user. This requirement limits the types of EAP methods that can be used. EAP methods which do not provide for security or privacy of user credentials cannot be used in eduroam. The most commonly used EAP methods in eduroam are EAP-TLS, PEAP, and EAP-TTLS. The methods used generally fall into two broad categories: those that use credentials in the form of some public-key mechanism with certificates and those that use so-called tunnelled authentication with "inner" passwords or other credentials. Most institutions use a tunnelled authentication method that requires a server certificate. These server certificates are used to set up a secure tunnel between the mobile device and the authentication server, through which the user credentials (e.g. name and password) are securely transported. A complication arises if the user's home institution does not use a two-letter country-code top-level domain as part of its realm, but a generic top-level domain such as .edu or .org. By inspection of such realms, it is not possible to determine which national RADIUS server the request should be routed to. Such domains will thus, by default, fail to work in international roaming. The workaround for this problem involves the creation of exceptions in the international RADIUS request routing tables; however, this workaround does not scale as the number of exception entries grows. Several solutions have been proposed to eliminate this workaround in the future, the most promising of which is RADIUS over TLS with Dynamic Discovery, which does not rely on static routing tables inside a RADIUS server configuration to route requests to their proper destination. Instead, the participating institution adds one NAPTR DNS resource record to its own domain's DNS zone, which states by which server eduroam authentication for the domain is handled. == Governance == GÉANT has established a lightweight global governance structure. Recognising the large variety in the organisation and funding of research and education (networking) in different countries and regions, rules imposed on the operations of eduroam are limited to technical and administrative requirements that are necessary to ensure the smooth and secure operations of eduroam worldwide. Moreover, the eduroam operators have the leading role in creating and maintaining the rules of the global eduroam governance. The Global eduroam Governance Committee (GeGC) has the central role in the global eduroam governance structure. While its structure has evolved over time, it presently has three representatives from each of five regions — mirroring those used by the Regional Internet registries — serving a two-year term. In addition, GÉANT may appoint one or more experts as non-voting members of the GeGC. == Geographical deployment == eduroam is available at selected locations in countries with a National Roaming Operator that has signed the eduroam Compliance Statement. Those sixty-seven countries are listed below. In addition, there may be pilot deployments in countries that are in the process of joining eduroam. === Middle East === eduroam is deployed in: === Europe === The NRENs that are members of the consortium of the GN3 project have joined the European eduroam confederation by signing the confederation's policy that requires its members to comply with a set of technical and organisational requirements, which are more specific than those in the global eduroam Compliance Statement. As a consequence, eduroam is deployed in the following countries: In addition, three NRENs that are associate members of the consortium of the GN3 project without voting rights joined the European eduroam confederation; they represent Belarus (UIIP), Moldova (RENAM) and Russia (Joint Supercomputer Center of the Russian Academy of Sciences). Finally, five NRENs not involved in the GN3 project joined the European eduroam confederation on a voluntary basis, enabling the deployment of the service in: The European top-level RADIUS servers are operated by SURFnet and Forskningsnettet. === Asia-Pacific === eduroam is deployed in the following countries and economies: The Asia-Pacific top-level RADIUS servers are operated by AARNet and by the University of Hong Kong. === North America === eduroam is deployed in: === Latin America === eduroam is deployed in: === Africa === eduroam is deployed in: The inter-African RADIUS servers are operated by West-African research and education network WACREN, the UbuntuNet Alliance and TENET.

    Read more →
  • The AI Con

    The AI Con

    The AI Con: How to Fight Big Tech's Hype and Create the Future We Want is a 2025 non-fiction book by linguist Emily M. Bender and sociologist Alex Hanna. It argues that much of what is labeled "artificial intelligence" is a misleading term that obscures ordinary automation while concentrating power in a small number of technology firms. The book was published in May 2025 by Harper in the United States and Bodley Head in the United Kingdom. It was developed alongside the authors' long-running podcast Mystery AI Hype Theater 3000, which critiques exaggerated claims about AI. == Synopsis == The authors present AI as a marketing umbrella that encourages audiences to infer understanding and agency where none exist. They argue readers should treat such language skeptically and to separate specific automated tasks from broad claims of intelligence. The book describes a recurring hype cycle in which corporate narratives justify data and labor extraction, the replacement of human services with cheaper substitutes, and the diversion of attention from present harms to speculative futures. While acknowledging limited uses such as pattern recognition, the authors argue that contemporary systems are best understood as text and media generators shaped by training data and human labor, not as thinking or reasoning entities. A central theme is the social and environmental cost of scaling these systems, including increased energy and water use, the appropriation of creative work for training, and the outsourcing of ghost work to low-paid data workers worldwide. These costs are linked to workplace effects, with the authors arguing that automation rarely eliminates jobs outright and more often degrades them through surveillance, work intensification, and unpaid oversight. As alternatives to passive adoption, the authors propose concrete responses: asking precise questions about what is being automated and why, demanding transparency about data and evaluation, and practicing what they call strategic refusal when deployment conflicts with evidence or values. The book also develops a vocabulary for public debate, rejecting both boosterish and doomerish narratives as grounded in the same assumption that AI is a singular, autonomous force. The authors recommend reading strategies such as favoring trusted human sources over automated summaries and using humor to deflate inflated claims. They describe a link between language to policy and power, arguing that precise terminology can help policymakers and the public resist austerity-driven automation and demand accountability for errors and harms. == Reception == The Guardian praised the book's myth-busting approach and its analysis of how hype erodes cultural and civic life by normalizing synthetic media as a substitute for human judgment. Kirkus Reviews described it as a contrarian account that catalogs concrete risks while cutting through speculative predictions. An interview in Business Insider highlighted the authors' accessible frameworks, including their proposal to describe chatbots as conversation simulators and to evaluate systems in terms of values, labor, and evidence. Coverage in GeekWire emphasized the book's call for resistance through collective bargaining, stronger data rights, and a norm of rejecting deployments that fail basic standards of necessity and evaluation. Some reviews were more critical. A review in LLRX argued that the book's tone could be overly polemical and that it gave limited attention to potential benefits claimed for generative systems. Coverage in the Financial Times, focused on Bender's broader public scholarship, situated the book within her long-standing critique of anthropomorphic narratives about large language models and her advocacy for more democratic oversight of automated systems.

    Read more →
  • Data profiling

    Data profiling

    Data profiling is the process of examining the data available from an existing information source (e.g. a database or a file) and collecting statistics or informative summaries about that data. The purpose of these statistics may be to: Find out whether existing data can be easily used for other purposes Improve the ability to search data by tagging it with keywords, descriptions, or assigning it to a category Assess data quality, including whether the data conforms to particular standards or patterns Assess the risk involved in integrating data in new applications, including the challenges of joins Discover metadata of the source database, including value patterns and distributions, key candidates, foreign-key candidates, and functional dependencies Assess whether known metadata accurately describes the actual values in the source database Understanding data challenges early in any data intensive project, so that late project surprises are avoided. Finding data problems late in the project can lead to delays and cost overruns. Have an enterprise view of all data, for uses such as master data management, where key data is needed, or data governance for improving data quality. == Introduction == Data profiling refers to the analysis of information for use in a data warehouse in order to clarify the structure, content, relationships, and derivation rules of the data. Profiling helps to not only understand anomalies and assess data quality, but also to discover, register, and assess enterprise metadata. The result of the analysis is used to determine the suitability of the candidate source systems, usually giving the basis for an early go/no-go decision, and also to identify problems for later solution design. == How data profiling is conducted == Data profiling utilizes methods of descriptive statistics such as minimum, maximum, mean, mode, percentile, standard deviation, frequency, variation, aggregates such as count and sum, and additional metadata information obtained during data profiling such as data type, length, discrete values, uniqueness, occurrence of null values, typical string patterns, and abstract type recognition. The metadata can then be used to discover problems such as illegal values, misspellings, missing values, varying value representation, and duplicates. Different analyses are performed for different structural levels. E.g. single columns could be profiled individually to get an understanding of frequency distribution of different values, type, and use of each column. Embedded value dependencies can be exposed in a cross-columns analysis. Finally, overlapping value sets possibly representing foreign key relationships between entities can be explored in an inter-table analysis. Normally, purpose-built tools are used for data profiling to ease the process. The computational complexity increases when going from single column, to single table, to cross-table structural profiling. Therefore, performance is an evaluation criterion for profiling tools. == When is data profiling conducted? == According to Kimball, data profiling is performed several times and with varying intensity throughout the data warehouse developing process. A light profiling assessment should be undertaken immediately after candidate source systems have been identified and DW/BI business requirements have been satisfied. The purpose of this initial analysis is to clarify at an early stage if the correct data is available at the appropriate detail level and that anomalies can be handled subsequently. If this is not the case the project may be terminated. Additionally, more in-depth profiling is done prior to the dimensional modeling process in order assess what is required to convert data into a dimensional model. Detailed profiling extends into the ETL system design process in order to determine the appropriate data to extract and which filters to apply to the data set. Additionally, data profiling may be conducted in the data warehouse development process after data has been loaded into staging, the data marts, etc. Conducting data at these stages helps ensure that data cleaning and transformations have been done correctly and in compliance of requirements. == Benefits and examples == Data profiling can improve data quality, shorten the implementation cycle of major projects, and improve users' understanding of data. Discovering business knowledge embedded in data itself is one of the significant benefits derived from data profiling. It can improve data accuracy in corporate databases.

    Read more →
  • Hilscher netx network controller

    Hilscher netx network controller

    The netX network controller family (based on ASICs), developed by Hilscher Gesellschaft für Systemautomation mbH, is a solution for implementing all proven Fieldbus and Real-Time Ethernet systems. It was the first Multi-Protocol ASIC which combines Real-Time-Ethernet and Fieldbus System in one solution. The Multiprotocol functionality is done over a flexible cpu sub system called XC. Through exchanging some microcode the XC is able to realize beside others a PROFINET IRT Switch, EtherCAT Slave, Ethernet Powerlink HUB, PROFIBUS, CAN bus, CC-Link Industrial Networks Interface. == The Hilscher netX family == === Multiplex Matrix IOs (MMIO) === The Multiplex Matrix is a set of PINs which could be configured freely with peripheral functions. Options are CAN, UART, SPI, I2C, GPIOs, PIOs and SYNC Trigger. === GPIOs === The GPIOs from Hilscher are able to generate Interrupts, could count level or flags, or could be connected to a timer unit to auto generate a PWM. The Resolution of the PWM is normally 10ns. In some netX ASICS is a dedicated Motion unit with a resolution if 1ns is available.

    Read more →
  • Kruskal count

    Kruskal count

    The Kruskal count (also known as Kruskal's principle, Dynkin–Kruskal count, Dynkin's counting trick, Dynkin's card trick, coupling card trick or shift coupling) is a probabilistic concept originally demonstrated by the Russian mathematician Evgenii Borisovich Dynkin in the 1950s or 1960s discussing coupling effects and rediscovered as a card trick by the American mathematician Martin David Kruskal in the early 1970s as a side-product while working on another problem. It was published by Kruskal's friend Martin Gardner and magician Karl Fulves in 1975. This is related to a similar trick published by magician Alexander F. Kraus in 1957 as Sum total and later called Kraus principle. Besides uses as a card trick, the underlying phenomenon has applications in cryptography, code breaking, software tamper protection, code self-synchronization, control-flow resynchronization, design of variable-length codes and variable-length instruction sets, web navigation, object alignment, and others. == Card trick == The trick is performed with cards, but is more a magical-looking effect than a conventional magic trick. The magician has no access to the cards, which are manipulated by members of the audience. Thus sleight of hand is not possible. Rather the effect is based on the mathematical fact that the output of a Markov chain, under certain conditions, is typically independent of the input. A simplified version using the hands of a clock performed by David Copperfield is as follows. A volunteer picks a number from one to twelve and does not reveal it to the magician. The volunteer is instructed to start from 12 on the clock and move clockwise by a number of spaces equal to the number of letters that the chosen number has when spelled out. This is then repeated, moving by the number of letters in the new number. The output after three or more moves does not depend on the initially chosen number and therefore the magician can predict it.

    Read more →
  • Contextual image classification

    Contextual image classification

    Contextual image classification, a topic of pattern recognition in computer vision, is an approach of classification based on contextual information in images. "Contextual" means this approach is focusing on the relationship of the nearby pixels, which is also called neighbourhood. The goal of this approach is to classify the images by using the contextual information. == Introduction == Similar as processing language, a single word may have multiple meanings unless the context is provided, and the patterns within the sentences are the only informative segments we care about. For images, the principle is same. Find out the patterns and associate proper meanings to them. As the image illustrated below, if only a small portion of the image is shown, it is very difficult to tell what the image is about. Even try another portion of the image, it is still difficult to classify the image. However, if we increase the contextual of the image, then it makes more sense to recognize. As the full images shows below, almost everyone can classify it easily. During the procedure of segmentation, the methods which do not use the contextual information are sensitive to noise and variations, thus the result of segmentation will contain a great deal of misclassified regions, and often these regions are small (e.g., one pixel). Compared to other techniques, this approach is robust to noise and substantial variations for it takes the continuity of the segments into account. Several methods of this approach will be described below. == Applications == === Functioning as a post-processing filter to a labelled image === This approach is very effective against small regions caused by noise. And these small regions are usually formed by few pixels or one pixel. The most probable label is assigned to these regions. However, there is a drawback of this method. The small regions also can be formed by correct regions rather than noise, and in this case the method is actually making the classification worse. This approach is widely used in remote sensing applications. === Improving the post-processing classification === This is a two-stage classification process: For each pixel, label the pixel and form a new feature vector for it. Use the new feature vector and combine the contextual information to assign the final label to the === Merging the pixels in earlier stages === Instead of using single pixels, the neighbour pixels can be merged into homogeneous regions benefiting from contextual information. And provide these regions to classifier. === Acquiring pixel feature from neighbourhood === The original spectral data can be enriched by adding the contextual information carried by the neighbour pixels, or even replaced in some occasions. This kind of pre-processing methods are widely used in textured image recognition. The typical approaches include mean values, variances, texture description, etc. === Combining spectral and spatial information === The classifier uses the grey level and pixel neighbourhood (contextual information) to assign labels to pixels. In such case the information is a combination of spectral and spatial information. === Powered by the Bayes minimum error classifier === Contextual classification of image data is based on the Bayes minimum error classifier (also known as a naive Bayes classifier). Present the pixel: A pixel is denoted as x 0 {\displaystyle x_{0}} . The neighbourhood of each pixel x 0 {\displaystyle x_{0}} is a vector and denoted as N ( x 0 ) {\displaystyle N(x_{0})} . The values in the neighbourhood vector is denoted as f ( x i ) {\displaystyle f(x_{i})} . Each pixel is presented by the vector ξ = ( f ( x 0 ) , f ( x 1 ) , … , f ( x k ) ) {\displaystyle \xi =\left(f(x_{0}),f(x_{1}),\ldots ,f(x_{k})\right)} x i ∈ N ( x 0 ) ; i = 1 , … , k {\displaystyle x_{i}\in N(x_{0});\quad i=1,\ldots ,k} The labels (classification) of pixels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} are presented as a vector η = ( θ 0 , θ 1 , … , θ k ) {\displaystyle \eta =\left(\theta _{0},\theta _{1},\ldots ,\theta _{k}\right)} θ i ∈ { ω 0 , ω 1 , … , ω k } {\displaystyle \theta _{i}\in \left\{\omega _{0},\omega _{1},\ldots ,\omega _{k}\right\}} ω s {\displaystyle \omega _{s}} here denotes the assigned class. A vector presents the labels in the neighbourhood N ( x 0 ) {\displaystyle N(x_{0})} without the pixel x 0 {\displaystyle x_{0}} η ^ = ( θ 1 , θ 2 , … , θ k ) {\displaystyle {\hat {\eta }}=\left(\theta _{1},\theta _{2},\ldots ,\theta _{k}\right)} The neighbourhood: Size of the neighbourhood. There is no limitation of the size, but it is considered to be relatively small for each pixel x 0 {\displaystyle x_{0}} . A reasonable size of neighbourhood would be 3 × 3 {\displaystyle 3\times 3} of 4-connectivity or 8-connectivity ( x 0 {\displaystyle x_{0}} is marked as red and placed in the centre). The calculation: Apply the minimum error classification on a pixel x 0 {\displaystyle x_{0}} , if the probability of a class ω r {\displaystyle \omega _{r}} being presenting the pixel x 0 {\displaystyle x_{0}} is the highest among all, then assign ω r {\displaystyle \omega _{r}} as its class. θ 0 = ω r if P ( ω r ∣ f ( x 0 ) ) = max s = 1 , 2 , … , R P ( ω s ∣ f ( x 0 ) ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid f(x_{0}))=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid f(x_{0}))} The contextual classification rule is described as below, it uses the feature vector x 1 {\displaystyle x_{1}} rather than x 0 {\displaystyle x_{0}} . θ 0 = ω r if P ( ω r ∣ ξ ) = max s = 1 , 2 , … , R P ( ω s ∣ ξ ) {\displaystyle \theta _{0}=\omega _{r}\quad {\text{ if }}\quad P(\omega _{r}\mid \xi )=\max _{s=1,2,\ldots ,R}P(\omega _{s}\mid \xi )} Use the Bayes formula to calculate the posteriori probability P ( ω s ∣ ξ ) {\displaystyle P(\omega _{s}\mid \xi )} P ( ω s ∣ ξ ) = p ( ξ ∣ ω s ) P ( ω s ) p ( ξ ) {\displaystyle P(\omega _{s}\mid \xi )={\frac {p(\xi \mid \omega _{s})P(\omega _{s})}{p\left(\xi \right)}}} The number of vectors is the same as the number of pixels in the image. For the classifier uses a vector corresponding to each pixel x i {\displaystyle x_{i}} , and the vector is generated from the pixel's neighbourhood. The basic steps of contextual image classification: Calculate the feature vector ξ {\displaystyle \xi } for each pixel. Calculate the parameters of probability distribution p ( ξ ∣ ω s ) {\displaystyle p(\xi \mid \omega _{s})} and P ( ω s ) {\displaystyle P(\omega _{s})} Calculate the posterior probabilities P ( ω r ∣ ξ ) {\displaystyle P(\omega _{r}\mid \xi )} and all labels θ 0 {\displaystyle \theta _{0}} . Get the image classification result. == Algorithms == === Template matching === The template matching is a "brute force" implementation of this approach. The concept is first create a set of templates, and then look for small parts in the image match with a template. This method is computationally high and inefficient. It keeps an entire templates list during the whole process and the number of combinations is extremely high. For a m × n {\displaystyle m\times n} pixel image, there could be a maximum of 2 m × n {\displaystyle 2^{m\times n}} combinations, which leads to high computation. This method is a top down method and often called table look-up or dictionary look-up. === Lower-order Markov chain === The Markov chain also can be applied in pattern recognition. The pixels in an image can be recognised as a set of random variables, then use the lower order Markov chain to find the relationship among the pixels. The image is treated as a virtual line, and the method uses conditional probability. === Hilbert space-filling curves === The Hilbert curve runs in a unique pattern through the whole image, it traverses every pixel without visiting any of them twice and keeps a continuous curve. It is fast and efficient. === Markov meshes === The lower-order Markov chain and Hilbert space-filling curves mentioned above are treating the image as a line structure. The Markov meshes however will take the two dimensional information into account. === Dependency tree === The dependency tree is a method using tree dependency to approximate probability distributions.

    Read more →
  • Data integration

    Data integration

    Data integration is the process of combining, sharing, or synchronizing data from multiple sources to provide users with a unified view. There are a wide range of possible applications for data integration, from commercial (such as when a business merges multiple databases) to scientific (combining research data from different bioinformatics repositories). The decision to integrate data tends to arise when the volume, complexity (that is, big data) and need to share existing data explodes. It has become the focus of extensive theoretical work, and numerous open problems remain unsolved. Data integration encourages collaboration between internal as well as external users. The data being integrated must be received from a heterogeneous database system and transformed to a single coherent data store that provides synchronous data across a network of files for clients. A common use of data integration is in data mining when analyzing and extracting information from existing databases that can be useful for Business information. == History == Issues with combining heterogeneous data sources, often referred to as information silos, under a single query interface have existed for some time. In the early 1980s, computer scientists began designing systems for interoperability of heterogeneous databases. The first data integration system driven by structured metadata was designed in 1991 at the University of Minnesota for the Integrated Public Use Microdata Series (IPUMS). IPUMS used a data warehousing approach, which extracts, transforms, and loads data from heterogeneous sources into a unique view schema so data from different sources become compatible. By making thousands of population databases interoperable, IPUMS demonstrated the feasibility of large-scale data integration. The data warehouse approach offers a tightly coupled architecture because the data are already physically reconciled in a single queryable repository, so it usually takes little time to resolve queries. The data warehouse approach is less feasible for data sets that are frequently updated, requiring the extract, transform, load (ETL) process to be continuously re-executed for synchronization. Difficulties also arise in constructing data warehouses when one has only a query interface to summary data sources and no access to the full data. This problem frequently emerges when integrating several commercial query services like travel or classified advertisement web applications. A trend began in 2009 favoring the loose coupling of data and providing a unified query-interface to access real time data over a mediated schema (see Figure 2), which allows information to be retrieved directly from original databases. This is consistent with the SOA approach popular in that era. This approach relies on mappings between the mediated schema and the schema of original sources, and translating a query into decomposed queries to match the schema of the original databases. Such mappings can be specified in two ways: as a mapping from entities in the mediated schema to entities in the original sources (the "Global-as-View" (GAV) approach), or as a mapping from entities in the original sources to the mediated schema (the "Local-as-View" (LAV) approach). The latter approach requires more sophisticated inferences to resolve a query on the mediated schema, but makes it easier to add new data sources to a (stable) mediated schema. As of 2010, some of the work in data integration research concerns the semantic integration problem. This problem addresses not the structuring of the architecture of the integration, but how to resolve semantic conflicts between heterogeneous data sources. For example, if two companies merge their databases, certain concepts and definitions in their respective schemas like "earnings" inevitably have different meanings. In one database it may mean profits in dollars (a floating-point number), while in the other it might represent the number of sales (an integer). A common strategy for the resolution of such problems involves the use of ontologies which explicitly define schema terms and thus help to resolve semantic conflicts. This approach represents ontology-based data integration. On the other hand, the problem of combining research results from different bioinformatics repositories requires bench-marking of the similarities, computed from different data sources, on a single criterion such as positive predictive value. This enables the data sources to be directly comparable and can be integrated even when the natures of experiments are distinct. As of 2011, it was determined that current data modeling methods were imparting data isolation into every data architecture in the form of islands of disparate data and information silos. This data isolation is an unintended artifact of the data modeling methodology that results in the development of disparate data models. Disparate data models, when instantiated as databases, form disparate databases. Enhanced data model methodologies have been developed to eliminate the data isolation artifact and to promote the development of integrated data models. One enhanced data modeling method recasts data models by augmenting them with structural metadata in the form of standardized data entities. As a result of recasting multiple data models, the set of recast data models will now share one or more commonality relationships that relate the structural metadata now common to these data models. Commonality relationships are a peer-to-peer type of entity relationships that relate the standardized data entities of multiple data models. Multiple data models that contain the same standard data entity may participate in the same commonality relationship. When integrated data models are instantiated as databases and are properly populated from a common set of master data, then these databases are integrated. Since 2011, data hub approaches have been of greater interest than fully structured (typically relational) Enterprise Data Warehouses. Since 2013, data lake approaches have risen to the level of Data Hubs. (See all three search terms popularity on Google Trends.) These approaches combine unstructured or varied data into one location, but do not necessarily require an (often complex) master relational schema to structure and define all data in the Hub. In recent times, as the number of applications being used have increased many fold and application to application integration have become critical and this has given rise to [Unified APIs] that help application developers integrate their apps with other apps and more recently with [MCP - Model Context Protocol] taking it a step further for AI Agents. Data integration plays a big role in business regarding data collection used for studying the market. Converting the raw data retrieved from consumers into coherent data is something businesses try to do when considering what steps they should take next. Organizations are more frequently using data mining for collecting information and patterns from their databases, and this process helps them develop new business strategies to increase business performance and perform economic analyses more efficiently. Compiling the large amount of data they collect to be stored in their system is a form of data integration adapted for Business intelligence to improve their chances of success. == Example == Consider a web application where a user can query a variety of information about cities (such as crime statistics, weather, hotels, demographics, etc.). Traditionally, the information must be stored in a single database with a single schema. But any single enterprise would find information of this breadth somewhat difficult and expensive to collect. Even if the resources exist to gather the data, it would likely duplicate data in existing crime databases, weather websites, and census data. A data-integration solution may address this problem by considering these external resources as materialized views over a virtual mediated schema, resulting in "virtual data integration". This means application-developers construct a virtual schema—the mediated schema—to best model the kinds of answers their users want. Next, they design "wrappers" or adapters for each data source, such as the crime database and weather website. These adapters simply transform the local query results (those returned by the respective websites or databases) into an easily processed form for the data integration solution (see figure 2). When an application-user queries the mediated schema, the data-integration solution transforms this query into appropriate queries over the respective data sources. Finally, the virtual database combines the results of these queries into the answer to the user's query. This solution offers the convenience of adding new sources by simply constructing an adapter or an application software blade for them. It contrasts with ETL systems or with a si

    Read more →
  • Pamphlet war

    Pamphlet war

    A pamphlet war is a protracted argument or discussion through printed media, especially between the time the printing press became common, and when state intervention like copyright laws made such public discourse more difficult. The purpose was to defend or attack a certain perspective or idea. Pamphlet wars have occurred multiple times throughout history, as both social and political platforms. Pamphlet wars became viable platforms for this protracted discussion with the advent and spread of the printing press. Cheap printing presses, and increased literacy made the late 17th century a key stepping stone for the development of pamphlet wars, a period of prolific use of this type of debate. Over 2200 pamphlets were published between 1600–1715 alone. Pamphlet wars are generally credited for powering many key social changes of the era, including the Reformation and the Revolution Controversy, the English philosophical debate set off by the French Revolution. == History of the pamphlet in England == Throughout Europe in the 16th century, printed tracts were used to argue religious doctrine and foment support for religious causes. In England, Henry VIII used print literature to justify his break from the Catholic Church. During the subsequent reigns of Edward and Mary, print polemics escalated into propaganda warfare, as print media gained enormous potential to sway common opinion. By the 1560s, print was widely used to convey news. In 1562, the first pamphlets appeared, which discussed the English forces sent to aid the Protestant French Huguenots. In 1569, pamphlets reported the revolt of the Northern Earls and the subsequent Rebellion of the same year. In the 1580s, pamphlets began to replace broadsheet ballads as the means to convey information to the general public. Over the next century, the pamphlet became the principal means of garnering support for a cause or an idea, and was particularly influential during the English Civil Wars (1642-1651) and the Glorious Revolution of 1688. Through the ensuing decades, the pamphlet lost some popularity due to the emergence of newspapers and journals, but continued to be an important medium of public debate, as illustrated by the Revolution Controversy a full century later in the 1790s. == Pamphlet printing == Coming from a Latin word, "pamphlet" literally means "small book." In the early days of printing, the format of the book or pamphlet depended on the size of the paper used and the number of times it was folded. If a page was only folded once, it was called a folio. If it was folded twice, it was known as a quarto. An octave was a paper folded three times. A pamphlet was usually 1-12 sheets of paper folded in quarto, or 8-96 pages. It was sold for one or two pennies apiece. The printing of a pamphlet involved many people: the author, the printer, suppliers, print-makers, compositor, correctors, pressmen, binders, and distributors. Once the pamphleteer had written the pamphlet, it was sent to the printing house to be corrected, set into type, and printed. The papers were then given to the printer's warehouse-keeper, who bundled the copies and sent them to the bookseller, who was probably the one financing the printing. He was responsible to bind the pamphlets, usually by sewing them, and then sold them wholesale to individual bookselling vendors. The booksellers then sold them from a stall in the marketplace. == Pamphlet subjects == Pamphlets began as the means of conveyance for religious debates, and therefore religious topics were one of the main subjects they dealt with. The definition of a pamphlet came to mean a short work dealing with social, political, or religious issues. Typical topics included the Civil war, Church of England doctrines, Acts of Parliament, the Popish Plot (see below), the Stuart Era, and Cromwell propaganda. In addition, pamphlets were also used for romantic fiction, autobiography, scurrilous personal abuse, and social criticism. They contained much of the propaganda of the 17th century in the midst of the religious and political turmoil. They were also used for debates between the Puritans and the Anglican. During the Glorious Revolution, pamphlets were political weapons. == Authors == There were many authors of pamphlets. However some of the more popular authors include Daniel Defoe, Thomas Hobbes, Jonathan Swift, John Milton, and Samuel Pepys. Also included in the midst are Thomas Nashe, Joseph Addison, Richard Steele, and Matthew Prior. In 1591–1592, Robert Greene released a series of pamphlets which later inspired many other authors including Thomas Middleton and Thomas Dekker. == Critics == Pamphlets, along with their vast popularity, received criticism. There were many in the time period who believed that pamphlets were full of foolishness. They thought the pamphlets were not good enough literature and that they would turn people from "good" writing. They believed that pamphlets would be the end of the great volumes of literature and that great writing would be forgotten. == News reporting == Pamphlets made a great difference in the way news was reported to the general public. With the publication of pamphlets, it was no longer difficult for people to hear of events taking place far away. The closer the occurrence was to London, the easier and faster people heard of it. For example, the Battle of Edgehill took place on 23 October 1642. The first pamphlet reporting the incident was printed on 25 October 24 hours after some of the orders reported had been given. While not entirely accurate, and hurriedly made, the pamphlet nonetheless was able to tell the general public what had happened in the battle. A more accurate, specific, and readable account was available in a pamphlet printed on 26 October, and the "authorized" version was available only five days after the battle took place. == Marprelate pamphlets == In 1588, a series of pamphlets marked a turning point for the Puritans, dividing them from other Protestants in the country. The authors wrote under the pseudonym of Martin Marprelate and his two sons of the same name. The true identities of the authors were never discovered. The pamphlets aimed to provoke authorities to take action against censorship. The series was among the first to ask questions directly of its readers. == Early pamphlet wars == === Elizabethan pamphlet wars === As a means of forming or swaying public opinion, pamphlets like these had a part in influencing society, even as the content was itself influenced by society. During the 16th century and continuing for a short while in the early 17th century in England there was rise in the use of pamphlet wars to discuss a myriad of issues spanning from the civil war, to religious freedoms and the roles of women in society. The Queen herself participated in these discussions, making sure that she was widely read and understood by her people in order to gain favour and establish herself as the monarch despite being a woman. Examples of her use of this medium appear in To the Troops at Tilbury written in 1588, On Mary's Execution written in 1586, and many more. Another famous writer of this period to take advantage of the pamphlet was Emilia Lanier, famous for her arguments about the role of women. A common idea promoted by many literary works and the general attitude towards women, Lanier's work "Eve's Apology in Defence of Women" refuted the belief that Eve is responsible for the fall of man. A very uncommon and unpopular stance to take, Lanier accomplishes her defence through structuring it as an apology, one of the earliest subversive feminist texts. Similarly, Francis Bacon wrote his Essays to promote his idea of morality and other complicated social issues. For example, his work, "Of Love" examines the various understandings of the concept of love, particularly as it was perceived during the Elizabethan era. === Eikon Series === From 1649 until 1651, some five pamphlets were published in a debate about the execution of King Charles I of England (1600-1649). Prior to his execution, King Charles wrote the first pamphlet in the discussion, Eikon Basilike’’ (from the Greek “eikon” for image and “basileus” for king). The subtitle of this work - Portraiture of His Sacred Majesty in His Solitudes and Sufferings - indicates that Charles sought to portray himself as a martyr to the cause of regal prerogative. In the following months, several response pamphlets were published (collectively known as the "Eikon" series), including: Eikon Alethine, Eikon e Pistes, Eikonoklastes, and Eikon Aklastos,” alternately attacking or defending the king, his regicide, and his self-portrait in “Eikon Basilike.” == Popish Plot and Elizabeth Cellier == In the 1680s, after being acquitted of the "Meal-Tub Plot" for which she was accused, Elizabeth Cellier wrote Malice Defeated, which, along with The Matchless Picaro, sparked a pamphlet war surrounding debate of the ascension of a Catholic king to the thro

    Read more →