AI App Home Design Free

AI App Home Design Free — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Artificial consciousness

    Artificial consciousness

    Artificial consciousness, also known as machine consciousness, synthetic consciousness, or digital consciousness, is consciousness hypothesized to be possible for artificial intelligence. It is also the corresponding field of study, which draws insights from philosophy of mind, philosophy of artificial intelligence, cognitive science and neuroscience. The term "sentience" can be used when specifically designating ethical considerations stemming from a form of phenomenal consciousness (P-consciousness, or the ability to feel qualia). Since sentience involves the ability to experience ethically positive or negative (i.e., valenced) mental states, it may justify welfare concerns and legal protection, as with non-human animals. Some scholars believe that consciousness is generated by the interoperation of various parts of the brain; these mechanisms are labeled the neural correlates of consciousness (NCC). Some further believe that constructing a system (e.g., a computer system) that can emulate this NCC interoperation would result in a system that is conscious. Some scholars reject the possibility of non-biological conscious beings. == Philosophical views == As there are many hypothesized types of consciousness, there are many potential implementations of artificial consciousness. In the philosophical literature, perhaps the most common taxonomy of consciousness is into "access" and "phenomenal" variants. Access consciousness concerns those aspects of experience that can be apprehended, while phenomenal consciousness concerns those aspects of experience that seemingly cannot be apprehended, instead being characterized qualitatively in terms of "raw feels", "what it is like" or qualia. === Plausibility debate === Type-identity theorists and other skeptics hold the view that consciousness can be realized only in particular physical systems because consciousness has properties that necessarily depend on physical constitution. In his 2001 article "Artificial Consciousness: Utopia or Real Possibility," Giorgio Buttazzo says that a common objection to artificial consciousness is that, "Working in a fully automated mode, they [the computers] cannot exhibit creativity, unreprogrammation (which means can 'no longer be reprogrammed', from rethinking), emotions, or free will. A computer, like a washing machine, is a slave operated by its components." For other theorists (e.g., functionalists), who define mental states in terms of causal roles, any system that can instantiate the same pattern of causal roles, regardless of physical constitution, will instantiate the same mental states, including consciousness. ==== Thought experiments ==== David Chalmers proposed two thought experiments intending to demonstrate that "functionally isomorphic" systems (those with the same "fine-grained functional organization", i.e., the same information processing) will have qualitatively identical conscious experiences, regardless of whether they are based on biological neurons or digital hardware. The "fading qualia" is a reductio ad absurdum thought experiment. It involves replacing, one by one, the neurons of a brain with a functionally identical component, for example based on a silicon chip. Chalmers makes the hypothesis, knowing it in advance to be absurd, that "the qualia fade or disappear" when neurons are replaced one-by-one with identical silicon equivalents. Since the original neurons and their silicon counterparts are functionally identical, the brain's information processing should remain unchanged, and the subject's behaviour and introspective reports would stay exactly the same. Chalmers argues that this leads to an absurd conclusion: the subject would continue to report normal conscious experiences even as their actual qualia fade away. He concludes that the subject's qualia actually don't fade, and that the resulting robotic brain, once every neuron is replaced, would remain just as sentient as the original biological brain. Similarly, the "dancing qualia" thought experiment is another reductio ad absurdum argument. It supposes that two functionally isomorphic systems could have different perceptions (for instance, seeing the same object in different colors, like red and blue). It involves a switch that alternates between a chunk of brain that causes the perception of red, and a functionally isomorphic silicon chip, that causes the perception of blue. Since both perform the same function within the brain, the subject would not notice any change during the switch. Chalmers argues that this would be highly implausible if the qualia were truly switching between red and blue, hence the contradiction. Therefore, he concludes that the equivalent digital system would not only experience qualia, but it would perceive the same qualia as the biological system (e.g., seeing the same color). Greg Egan's short story Learning To Be Me (mentioned in §In fiction), illustrates how undetectable duplication of the brain and its functionality could be from a first-person perspective. Critics object that Chalmers' proposal begs the question in assuming that all mental properties and external connections are already sufficiently captured by abstract causal organization. Van Heuveln et al. argue that the dancing qualia argument contains an equivocation fallacy, conflating a "change in experience" between two systems with an "experience of change" within a single system. Mogensen argues that the fading qualia argument can be resisted by appealing to vagueness at the boundaries of consciousness and the holistic structure of conscious neural activity, which suggests consciousness may require specific biological substrates rather than being substrate-independent. Anil Seth argues that the complexity of brain neurons intrinsically matters in addition to their function and that it is not possible to replace any part of the brain with a perfect silicon equivalent. He points out that some of biological neurons exhibit activity aimed at cleaning up metabolic waste products, and writes that a perfect silicon replacement would require a silicon-based metabolism, but silicon is not suitable for creating such artificial metabolism. ==== In large language models ==== In 2022, Google engineer Blake Lemoine made a viral claim that Google's LaMDA chatbot was sentient. Lemoine supplied as evidence the chatbot's humanlike answers to many of his questions; however, the chatbot's behavior was judged by the scientific community as likely a consequence of mimicry, rather than machine sentience. Lemoine's claim was widely derided for being ridiculous. Moreover, attributing consciousness based solely on the basis of LLM outputs or the immersive experience created by an algorithm is considered a fallacy. However, while philosopher Nick Bostrom states that LaMDA is unlikely to be conscious, he additionally poses the question of "what grounds would a person have for being sure about it?" One would have to have access to unpublished information about LaMDA's architecture, and also would have to understand how consciousness works, and then figure out how to map the philosophy onto the machine: "(In the absence of these steps), it seems like one should be maybe a little bit uncertain. [...] there could well be other systems now, or in the relatively near future, that would start to satisfy the criteria." David Chalmers argued in 2023 that LLMs today display impressive conversational and general intelligence abilities, but are likely not conscious yet, as they lack some features that may be necessary, such as recurrent processing, a global workspace, and unified agency. Nonetheless, he considers that non-biological systems can be conscious, and suggested that future, extended models (LLM+s) incorporating these elements might eventually meet the criteria for consciousness, raising both profound scientific questions and significant ethical challenges. However, the view that consciousness can exist without biological phenomena is controversial and some reject it. Kristina Šekrst cautions that anthropomorphic terms such as "hallucination" can obscure important ontological differences between artificial and human cognition. While LLMs may produce human-like outputs, she argues that it does not justify ascribing mental states or consciousness to them. Instead, she advocates for an epistemological framework (such as reliabilism) that recognizes the distinct nature of AI knowledge production. She suggests that apparent understanding in LLMs may be a sophisticated form of AI hallucination. She also questions what would happen if an LLM were trained without any mention of consciousness. === Testing === Sentience is an inherently first-person phenomenon. Because of that, and due to the lack of an empirical definition of sentience, directly measuring it may be impossible. Although systems may display numerous behaviors correlated with sentience, determining whether a system is sentient is known as the hard pr

    Read more →
  • Automotive security

    Automotive security

    Automotive security refers to the branch of computer security focused on the cyber risks related to the automotive context. The increasingly high number of ECUs in vehicles and, alongside, the implementation of multiple different means of communication from and towards the vehicle in a remote and wireless manner led to the necessity of a branch of cybersecurity dedicated to the threats associated with vehicles. Not to be confused with automotive safety. == Causes == The implementation of multiple ECUs (Electronic Control Units) inside vehicles began in the early '70s thanks to the development of integrated circuits and microprocessors that made it economically feasible to produce the ECUs on a large scale. Since then the number of ECUs has increased to up to 100 per vehicle. These units nowadays control almost everything in the vehicle, from simple tasks such as activating the wipers to more safety-related ones like brake-by-wire or ABS (Anti-lock Braking System). Autonomous driving is also strongly reliant on the implementation of new, complex ECUs such as the ADAS, alongside sensors (lidars and radars) and their control units. Inside the vehicle, the ECUs are connected with each other through cabled or wireless communication networks, such as CAN bus (controller area network), MOST bus (Media Oriented System Transport), FlexRay (Automotive Network Communications Protocol) or RF (radio frequency) as in many implementations of TPMSs (tire-pressure monitoring systems). Many of these ECUs require data received through these networks that arrive from various sensors to operate and use such data to modify the behavior of the vehicle (e.g., the cruise control modifies the vehicle's speed depending on signals arriving from a button usually located on the steering wheel). Since the development of cheap wireless communication technologies such as Bluetooth, LTE, Wi-Fi, RFID and similar, automotive producers and OEMs have designed ECUs that implement such technologies with the goal of improving the experience of the driver and passengers. Safety-related systems such as the OnStar from General Motors, telematic units, communication between smartphones and the vehicle's speakers through Bluetooth, Android Auto and Apple CarPlay. == Threat model == Threat models of the automotive world are based on both real-world and theoretically possible attacks. Most real-world attacks aim at the safety of the people in and around the car, by modifying the cyber-physical capabilities of the vehicle (e.g., steering, braking, accelerating without requiring actions from the driver), while theoretical attacks have been supposed to focus also on privacy-related goals, such as obtaining GPS data on the vehicle, or capturing microphone signals and similar. Regarding the attack surfaces of the vehicle, they are usually divided in long-range, short-range, and local attack surfaces: LTE and DSRC can be considered long-range ones, while Bluetooth and Wi-Fi are usually considered short-range although still wireless. Finally, USB, OBD-II and all the attack surfaces that require physical access to the car are defined as local. An attacker that is able to implement the attack through a long-range surface is considered stronger and more dangerous than the one that requires physical access to the vehicle. In 2015 the possibility of attacks on vehicles already on the market has been proven possible by Miller and Valasek, that managed to disrupt the driving of a Jeep Cherokee while remotely connecting to it through remote wireless communication. === Controller area network attacks === The most common network used in vehicles and the one that is mainly used for safety-related communication is CAN, due to its real-time properties, simplicity, and cheapness. For this reason the majority of real-world attacks have been implemented against ECUs connected through this type of network. The majority of attacks demonstrated either against actual vehicles or in testbeds fall in one or more of the following categories: ==== Sniffing ==== Sniffing in the computer security field generally refers to the possibility of intercepting and logging packets or more generally data from a network. In the case of CAN, since it is a bus network, every node listens to all communication on the network. It is useful for the attacker to read data to learn the behavior of the other nodes of the network before implementing the actual attack. Usually, the final goal of the attacker is not to simply sniff the data on CAN, since the packets passing on this type of network are not usually valuable just to read. ==== Denial of service ==== Denial of service (DoS) in information security is usually described as an attack that has the objective of making a machine or a network unavailable. DoS attacks against ECUs connected to CAN buses can be done both against the network, by abusing the arbitration protocol used by CAN to always win the arbitration, and targeting the single ECU, by abusing the error handling protocol of CAN. In this second case the attacker flags the messages of the victim as faulty to convince the victim of being broken and therefore shut itself off the network. ==== Spoofing ==== Spoofing attacks comprise all cases in which an attacker, by falsifying data, sends messages pretending to be another node of the network. In automotive security usually spoofing attacks are divided into masquerade and replay attacks. Replay attacks are defined as all those where the attacker pretends to be the victim and sends sniffed data that the victim sent in a previous iteration of authentication. Masquerade attacks are, on the contrary, spoofing attacks where the data payload has been created by the attacker. == Real life automotive threat example == Security researchers Charlie Miller and Chris Valasek have successfully demonstrated remote access to a wide variety of vehicle controls using a Jeep Cherokee as the target. They were able to control the radio, environmental controls, windshield wipers, and certain engine and brake functions. The method used to hack the system was implementation of pre-programmed chip into the controller area network (CAN) bus. By inserting this chip into the CAN bus, he was able to send arbitrary message to CAN bus. One other thing that Miller has pointed out is the danger of the CAN bus, as it broadcasts the signal which the message can be caught by the hackers throughout the network. The control of the vehicle was all done remotely, manipulating the system without any physical interaction. Miller states that he could control any of some 1.4 million vehicles in the United States regardless of the location or distance, the only thing needed is for someone to turn on the vehicle to gain access. The work by Miller and Valasek replicated earlier work completed and published by academics in 2010 and 2011 on a different vehicle. The earlier work demonstrated the ability to compromise a vehicle remotely, over multiple wireless channels (including cellular), and the ability to remotely control critical components on the vehicle post-compromise, including the telematics unit and the car's brakes. While the earlier academic work was publicly visible, both in peer-reviewed scholarly publications and in the press, the Miller and Valesek work received even greater public visibility. == Security measures == The increasing complexity of devices and networks in the automotive context requires the application of security measures to limit the capabilities of a potential attacker. Since the early 2000 many different countermeasures have been proposed and, in some cases, applied. Following, a list of the most common security measures: Sub-networks: to limit the attacker capabilities even if he/she manages to access the vehicle from remote through a remotely connected ECU, the networks of the vehicle are divided in multiple sub-networks, and the most critical ECUs are not placed in the same sub-networks of the ECUs that can be accessed from remote. Gateways: the sub-networks are divided by secure gateways or firewalls that block messages from crossing from a sub-network to the other if they were not intended to. Intrusion Detection Systems (IDS): on each critical sub-network, one of the nodes (ECUs) connected to it has the goal of reading all data passing on the sub-network and detect messages that, given some rules, are considered malicious (made by an attacker). The arbitrary messages can be caught by the passenger by using IDS which will notify the owner regarding with unexpected message. Authentication protocols: in order to implement authentication on networks where it is not already implemented (such as CAN), it is possible to design an authentication protocol that works on the higher layers of the ISO OSI model, by using part of the data payload of a message to authenticate the message itself. Hardware Security Modules: since many ECUs are not powerful enough to keep real-time delays whi

    Read more →
  • Vatican News App

    Vatican News App

    The Vatican News App is an official mobile application software issued by the Vatican's Dicastery for Communication. Formerly titled The Pope App, the app was launched on January 23, 2013, under the auspices of the Pontifical Council for Social Communications, a now-defunct dicastery that was merged into the Secretariat (now Dicastery) for Communication in March 2016. Initially, The Pope App was available only on iOS devices, but became available for Android phones at the end of February 2013. The app is available for download on iOS and Android in five languages: English, French, Italian, Portuguese and Spanish. It was originally promoted as an application with focus on the figure of the Pope which made it possible to follow the Pope's events while they are taking place. Alerts notified the followers by informing and offering access to "official papal-related content in a variety of formats". The app also enabled its users to see areas of the Vatican through webcams allocated throughout St. Peter's Square in Rome that broadcast images. In early 2018, The Pope App was relaunched as the Vatican News App, accompanied by a redesign that eliminated many of the previous version's features, reducing the app to a more conventional news service, with increased emphasis on news from the Vatican and the worldwide Catholic Church and less focus on the day-to-day activities of the Pope.

    Read more →
  • MeituPic

    MeituPic

    Meitu Xiu Xiu ("Meitu") (Chinese: 美图秀秀) is an image editing software that is mostly used in Mainland China but is also popular in Hong Kong and Taiwan. It is only available on Google Play and App Store in certain countries. It provides tools for editing photos: filters, retouching, collage, scenes, frames, and photo decorations, as well as generative AI features such as text-to-images, AI removal and AI repainting etc. Meitu is one of the apps developed by Meitu, Inc.; it also produced BeautyCam, Wink and X-Design. == History == Meitu's PC version was created in 2008 by Wu Xinhong, the CEO of Meitu. In 2013, its mobile version became one of the first must-have mobile apps in China. Meitu, Inc. is a photo and video-centered app developer, which was founded in 2008 in Xiamen. Currently, the major revenue source of Meitu is premium subscription. Meitu, Inc. was initially funded by Cai Wensheng, a well-known angel investor. The company has an approximately 250 million monthly active users globally. == Function == === Edit === MeituPic provides a number of photo-editing tools. The major functions are auto enhance, edit, enhance, filters, frames, magic brush, mosaic, text, and blur. Auto enhance focuses on the nature of photos taken, while Edit includes functions of cropping, rotation, sharpening, and adjustment of ratio. For Enhance, users can apply slight adjustment on the photo by controlling the levels of brightness, contrast, colour temperature, saturation, highlight, shadow and smart light. Major types of filters are LOMO, beauty, style as well as art. Different frames can be chosen from poster, simple, and fantasy. Magic brush provides a great variety of brushes with different colours and patterns for users to decorate the photos. Mosaic brush enables users to cover certain parts of the photo. Texts can be added to the photo. Choices of different bubbles, font as well as style of words are available. Blurring effect is also available to make the photo less distinct and clear. === Beauty Retouch === There are seven major functions for retouching a photo: automatic retouch, smooth and whiten skin, remove blemish, make slimmer, remove dark circles and bags under the eyes, make taller, and enhance the eyes. Automatic retouch enhances portraits by lightening the skin tone, brightening the eyes, and simulating a face-lift by tapping on just one button. This helps to remove wrinkles and optimizes the skin tone. Acne, blemishes, and other skin imperfections can also be removed. The face-lift and weight-loss functions in the slimming option can be used to reshape the body. The option to make the subject taller can be used to change the perceived height of the subject and give the impression of slimmer, longer legs. The option to enhance the eyes can enlarge and brighten the eyes. === Collage === Collage has four types: template, freestyle, poster, PicStrip, which all maximize to insert nine photos. Template integrates photos in a vertical rectangle tightly. MeituPic has 15 frames or free download function for users. MeituPic also provides different templates according to number of photos inserted. Freestyle separates photos on a background freely. There are two parts of background: custom and more. For custom, users choose from album. For more, there are plain and picture with 18 choices. Poster makes a poster with photos. Users choose a poster among 8 choices or tap ‘more’ to download a new one. PicStrip combines photos vertically making an elongated file. Users choose a frame from 15 choices. Pinching thumb and forefinger together or apart zooms photos in/out. Putting two fingers and turning hand rotates photos. Pressing moves photos to ideal location. After designing, users tap ‘save/share’ on the upper right corner and the photo made is saved into album automatically. == Awards ==

    Read more →
  • DBGallery

    DBGallery

    DBGallery, short for Database Gallery, is a cloud-based Software as a Service (SaaS) and on-prem webserver for teams of various sizes. DBGallery enables users to centrally store, manage, catalog, archive, and securely share image, video, and document files. It facilitates version control, detects duplicates, and offers an intuitive and advanced search functionality, making assets easily accessible to all users. It takes advantage of current AI technologies to automatically add significant metadata to images, facilitates custom-trained AI models, and offers bespoke AI features. Additionally, DBGallery provides team management tools, workflow management, an activity audit trail, and other collaborative features that foster a productive environment for both internal and external stakeholders. == History == DBGallery's first public release was December 2007. Since then each year has seen continuous enhancements. 2013 added support for additional non-English languages in its meta-data. 2014 added support for creating custom data fields for tagging and search. In 2015 included the ability to auto-tag images using Reverse Geocoding. 2018 added artificial intelligence (AI) image recognition as a further addition to auto-tagging. March 2020 added complete image collection management via the web (e.g. file and folder drag and drop), a new collection dashboard, custom data layouts, and an improved audit trail. 2021 saw user experience improvements provided by improved styling and performance enhancements. Version 12 was released in October 2021. It added the ability to upload unlimited file sizes and made significant performance improvements for very large collections. June 2022 saw the release of a global duplicate images search. In late 2022, DBGallery began offering significantly reduced cloud storage cost, at a third of its previous prices, which played into its recent high-volume/high-capacity capabilities and its clients' subsequent demand for additional storage. 2023 saw improvements in user and role management, introduced it's mobile app (PWA), and improved custom-trained object detection. Release 14.0 in the spring of 2024 had large sharing improvements and a new find related images feature. Winter 2025's v15 release introduced AI-generated image descriptions, image-to-text, and facial recognition.

    Read more →
  • Operational image

    Operational image

    An operational image, also known as operative image, is an image that serves a functional, rather than aesthetic, purpose. Operational images are not intended to be viewed by people as representations of the real world; they are created to be used as instruments in performing some task or operation, often by machine automation. Operational images are used in a wide variety of applications, such as weapons targeting and guidance systems, and assisting surgeons performing robot-assisted surgery. The term "operational image" was first coined in 2000 by German filmmaker Harun Farocki in the first part of his three-part audiovisual installation, Eye/Machine. Farocki's installation included operational images used by militaries, such as weapons guidance and targeting systems. Eye/Machine featured images shown to the public by the United States military from the cameras used by laser-guided missiles in the Gulf War. Farocki defined operational images as "Images without a social goal, not for edification, not for reflection," and that they "do not represent an object, but rather are part of an operation." According to Volker Pantenburg, operational images are more accurately characterized as "visualizations of data". He describes operational images as a "working image" or an image that "performs work". Operational images are ubiquitous in modern society, used for a variety of military and non-military applications, such as inspecting sewer piping, and assisting surgeons performing robotic surgery.

    Read more →
  • Database-as-IPC

    Database-as-IPC

    In computer programming, Database-as-IPC may be considered an anti-pattern where a disk persisted table in a database is used as the message queue store for routine inter-process communication (IPC) or subscribed data processing. If database performance is of concern, alternatives include sockets, network socket, or message queue. British computer scientist, Junade Ali, defined the Database-as-IPC Anti-Pattern as using a database to "schedule jobs or queue up tasks to be completed", noting that this anti-pattern centres around using a database for temporary messages instead of persistent data. == Controversy == The issue arises if there is a performance issue, and if additional systems (and servers) can be justified. In terms of performance, recent advancements in database systems provide more efficient mechanisms for signaling and messaging, and database systems also support memory (non-persisted) tables. There are databases with built-in notification mechanisms, such as PostgreSQL, SQL Server, and Oracle. These mechanisms and future improvements of database systems can make queuing much more efficient and avoid the need to set up a separate signaling or messaging queue system along with the server and management overhead. While MySQL doesn't have direct support for notifications, some workarounds are possible. However, they would be seen as non-standard and therefore more difficult to maintain.

    Read more →
  • NAPLPS

    NAPLPS

    NAPLPS (North American Presentation Layer Protocol Syntax) is a graphics language for use originally with videotex and teletext services. NAPLPS was developed from the Telidon system developed in Canada, with a small number of additions from AT&T Corporation. The basics of NAPLPS were later used as the basis for several other microcomputer-based graphics systems. == History == The Canadian Communications Research Centre (CRC), based in Ottawa, had been working on various graphics systems since the late 1960s, much of it led by Herb Bown. Through the 1970s they turned their attention to building out a system of "picture description instructions", which encoded graphics commands as a text stream. Graphics were encoded as a series of instructions (graphics primitives) each represented by a single ASCII character. Graphic coordinates were encoded in multiple 6-bit strings of XY coordinate data, flagged to place them in the printable ASCII range so that they could be transmitted with conventional text transmission techniques. ASCII SI/SO characters were used to differentiate the text from graphic portions of a transmitted "page". These instructions were decoded by separate programs to produce graphics output, on a plotter for instance. Other work produced a fully interactive version. In 1975, the CRC gave a contract to Norpak to develop an interactive graphics terminal that could decode the instructions and display them on a color display. During this period, a number of companies were developing the first teletext systems, notably the BBC's Ceefax system. Ceefax encoded character data into the lines in the vertical blanking interval of normal television signals where they could not be seen on-screen, and then used a buffer and decoder in the user's television to convert these into "pages" of text on the display. The Independent Broadcasting Authority quickly introduced their own ORACLE system, and the two organizations subsequently agreed to use a single standard, the "Broadcast Teletext Specification". This later became World System Teletext. At about the same time, other organizations were developing videotex systems, similar to teletext except they used modems to transmit their data instead of television signals. This was potentially slower and used up a telephone line, but had the major advantage of allowing the user to transmit data back to the sender. The UK's General Post Office developed a system using the Ceefax/ORACLE standard, launching it as Prestel, while France prepared the first steps for its ultimately very successful Minitel system, using a rival display standard called Antiope. By 1977, the Norpak system was running, and from this work the CRC decided to create their own teletext/videotext system. Unlike the systems being rolled out in Europe, the CRC decided from the start that the system should be able to run on any combination of communications links. For instance, it could use the vertical blanking interval to send data to the user, and a modem to return selections to the servers. It could be used in a one-way or two-way system. In teletext mode, character codes were sent to users' televisions by encoding them as dot patterns in the vertical blanking interval of the video signal. Various technical "tweaks" and details of the NTSC signals used by North American televisions allowed the downstream videotex channel to increase to 600 bit/s, about twice that used in the European systems. In videotext mode, Bell 202 modems were typical, offering a 1,200 bit/s download rate. A set top box attached to the TV decoded these signals back into text and graphics pages, which the user could select among. The system was publicly launched as Telidon on August 15, 1978. Compared to the European standards, the CRC system was faster, bi-directional, and offered real graphics as opposed to simple character graphics. The downside of the system was that it required much more advanced decoders, typically featuring Zilog Z80 or Motorola 6809 processors with RGB and/or RF output. The Innovation, Science and Economic Development Canada (then Department of Communications) launched a four-year plan to fund public roll-outs of the technology in an effort to spur the development of a commercial Telidon system. AT&T Corporation was so impressed by Telidon that they decided to join the project. They added a number of useful extensions, notably the ability to define original graphics commands (macro) and character sets (DRCS). They also tabled algorithms for proportionally spaced text, which greatly improved the quality of the displayed pages. A joint CSA/ANSI working group (X3L2.1) revised the specifications, which were submitted for standardization. In 1983, they became CSA T500 and ANSI X3.110, or NAPLPS. The data encoding system was also standardized as the NABTS (North American Broadcast Teletext Specification) protocol. Business models for Telidon services were poorly developed. Unlike the UK, where teletext was supported by one of only two large companies whose whole revenue model was based on a read-only medium (television), in North America Telidon was being offered by companies who worked on a subscriber basis. == One-way systems == Telidon-based teletext was tested in a few North American trials in the early 1980s — CBC IRIS, TVOntario, MTS-sponsored Project IDA, to name a few. NAPLPS was also part of the NABTS teletext standard, for the encoding and display of teletext pages. In the late 1980s and early 1990s, affiliates of the regional sports network group SportsChannel ran a service called Sports Plus Network, which ran sports news and scores while SportsChannel was not otherwise on the air. The screens, which frequently featured team logos or likenesses of players in addition to text, were drawn entirely with NAPLPS graphics and resembled the loading of Prodigy pages over a modem, though slightly faster. == Two-way systems == Various two-way systems using NAPLPS appeared in North America in the early 1980s. The biggest North American examples were Knight Ridder's Viewtron (based in Miami) and the Los Angeles Times' Gateway service (based in Orange County). Both used the Sceptre NAPLPS terminal from AT&T. The Sceptre contained a slow modem that connected over the consumer's telephone line to host computers. The Sceptre was expensive whether purchased or rented. Despite huge investments by their parent companies, neither Viewtron nor Gateway lasted into the second half of the decade. Another system, Keyfax, was developed by Keycom Electronic Publishing, a joint venture of Honeywell, Centel (since acquired by Sprint) and Field Enterprises, then-owner of the Chicago Sun-Times newspaper. Keyfax had originally been a WST teletext service, broadcast overnights on Field's Chicago television station WFLD-32 and through the VBI of both WFLD and national superstation WTBS; the decision was made to convert Keyfax into a subscription service, using a proprietary NAPLPS terminal device in a last-ditch effort to save the service. It did not work and Keyfax had ceased operations by the end of 1986. Other early-1980s NAPLPS technology was deployed in Canada, both as a way for rural Canadians to get news and weather information and as the platform for touchscreen information kiosks. In Vancouver these were featured at Expo 86. The kiosks became ubiquitous in Toronto under the name Teleguide, and were deployed in many shopping centres and at major tourist attractions. The latter city was the North American nexus of NAPLPS and the home of Norpak, the most successful of NAPLPS-oriented developers. Norpak created and sold hardware and software for NAPLPS development and display. TVOntario also developed NAPLPS content creation software. London, Ontario - based Cableshare used NAPLPS as the basis of touch-screen information kiosks for shopping malls, the flagship of which was deployed at Toronto's Eaton Centre. The system relied on an 8085-based microcomputer which drove several NAPLPS terminals fitted with touch screens, all communicating via Datapac to a back end database. The system offered news, weather and sports information along with shopping mall guides and coupons. Cableshare also developed and sold a leading NAPLPS page creation utility called the "Picture Painter." In the late 1980s, Tribune Media Services (TMS) and the Associated Press operated a cable television channel called AP News Plus that provided NAPLPS-based news screens to cable television subscribers in many U.S. cities. The news pages were created and edited by TMS staffers working on an Atex editing system in Orlando, Florida, and sent by satellite to NAPLPS decoder devices located at the local cable television companies. Among the firms providing technology to TMS and the Associated Press for the AP News Plus channel was Minneapolis-based Electronic Publishers Inc. (1985–1988). In 1981, two amateur radio operators (VE3FTT and VE3GQW) received special permission from the Canad

    Read more →
  • KoalaPad

    KoalaPad

    The KoalaPad is a graphics tablet, released in 1983 by US company Koala Technologies Corporation, for the Apple II, TRS-80 Color Computer (as the TRS-80 Touch Pad), Atari 8-bit computers, Commodore 64, and IBM PC compatibles. Originally designed by Dr. David Thornburg as a low-cost computer drawing tool for schools, the Koala Pad and the bundled drawing program, KoalaPainter, was popular with home users as well. KoalaPainter was called KoalaPaint in some versions for the Apple II, and PC Design for the IBM PC. A program called Graphics Exhibitor was included for creating slideshow presentations from KoalaPainter drawings. == Description == The pad was four inches square (i.e. roughly 10×10 cm) and mounted on a slightly inclined base with the back of the pad higher than the front. At the top, "behind" the pad, were two buttons. The pad hooked into the computer using the analog signals of the joystick ports (the so-called paddle inputs), which meant that it had a low resolution and tended to jostle the cursor if moved during use. As an alternative to the drawing stylus, the pad could as easily be operated by the user's fingers for tasks that demanded less precision, such as selecting between menu items (thus using the pad as a kind of "indirect touch screen"). The top-mounted buttons tended to be somewhat frustrating to use, as the user had to "reach around" the stylus to push the buttons in order to start or stop drawing. A similar tablet from Atari, the Atari CX77 Touch Tablet, addressed this with a built-in button on the stylus, which some enterprising users adapted for use with their KoalaPad. == KoalaPainter == The pad shipped with a simple bitmap graphics editor developed by Audio Light called KoalaPainter, PC Design or Micro Illustrator depending on the target machine (see release history). Although bundled with the pad, KoalaPainter could also be operated using an ordinary digital joystick. One unique feature of the program, for its time, was that it held two pictures in the computer's memory, allowing the user to flip from one to the other—a function commonly used in order to study the differences between an original and a modified picture, and to copy and paste between two different pictures. Some third-party bitmap editors could also be used with the KoalaPad, such as Broderbund's Dazzle Draw for the Apple II. === Release history === KoalaPainter for Commodore 64 (1983) and Atari 8-bit computers (1983) PC Design for the IBM PC (1983) Micro Illustrator for the Apple II (1983), Atari 8-bit computers (1983) and Commodore Plus/4 (1984) KoalaPainter II for Commodore 64 (1984) === Reception === Ahoy! called KoalaPainter "a very powerful and effective color drawing package", and concluded that it and the KoalaPad were "excellent in ease of use, a fine choice for a beginner as well as young children". BYTE's reviewer stated in December 1984 that he made far fewer errors when using an Apple Mouse with MousePaint than with a KoalaPad and its software. He found that MousePaint was easier to use and more efficient, predicting that the mouse would receive more software support than the pad. Cassie Stahl in InfoWorld's Essential Guide to Atari Computers praised the tablet and its documentation, rating it "Excellent" among all categories and stating that "Playing with the KoalaPad becomes addictive. It does everything it claims to, and it does it well". She also liked Micro Illustrator, rating it "Excellent" except for "Good" for Performance. While criticizing the limited erase function, Stahl reported an undocumented feature enabling exporting pictures to other software. === File format === The Commodore 64 version of KoalaPainter used a fairly simple file format corresponding directly to the way bitmapped graphics are handled on the computer: A two-byte load address, followed immediately by 8,000 bytes of raw bitmap data, 1,000 bytes of raw "Video Matrix" data, 1,000 bytes of raw "Color RAM" data, and a one-byte Background Color field. == KoalaWare == Koala Technologies offered more software beyond the bundled KoalaPainter and Graphics Exhibitor for use with the pad. Among these applications, marketed under the moniker KoalaWare (like KoalaPainter itself), was educational software for use with customized keypads and overlays, such as spelling tools, music programs, and mathematics instruction software, as well as software for "translating" graphical designs into Logo programs.

    Read more →
  • National Parking Platform

    National Parking Platform

    The National Parking Platform is a digital platform in the United Kingdom providing interoperability between car park operators, parking apps, and other service providers. It enables all parking apps that support the system: RingGo, JustPark, PayByPhone, Apcoa Connect, AppyParking, and Caura to work at all participating car parks. It has been rolled out in 13 local authorities so far. It was first developed by the Department for Transport starting in 2019, and since May 2025 is controlled by the British Parking Association on a not-for-profit basis. == Participating local authorities == Buckinghamshire Cheshire West and Chester Coventry City East Hertfordshire East Suffolk Liverpool City Manchester City Oxfordshire County Peterborough City Stevenage Sutton Walsall Welwyn Hatfield

    Read more →
  • Metadata repository

    Metadata repository

    A metadata repository is a database created to store metadata. Metadata is information about the structures that contain the actual data. Metadata is often said to be "data about data", but this is misleading. Data profiles are an example of actual "data about data". Metadata adds one layer of abstraction to this definition– it is data about the structures that contain data. Metadata may describe the structure of any data, of any subject, stored in any format. A well-designed metadata repository typically contains data far beyond simple definitions of the various data structures. Typical repositories store dozens to hundreds of separate pieces of information about each data structure. Comparing the metadata of a couple data items - one digital and one physical - clarify what metadata is: First, digital: For data stored in a database one may have a table called "Patient" with many columns, each containing data which describes a different attribute of each patient. One of these columns may be named "Patient_Last_Name". What is some of the metadata about the column that contains the actual surnames of patients in the database? We have already used two items: the name of the column that contains the data (Patient_Last_Name) and the name of the table that contains the column (Patient). Other metadata might include the maximum length of last name that may be entered, whether or not last name is required (can we have a patient without Patient_Last_Name?), and whether the database converts any surnames entered in lower case to upper case. Metadata of a security nature may show the restrictions which limit who may view these names. Second, physical: For data stored in a brick and mortar library, one have many volumes and may have various media, including books. Metadata about books would include ISBN, Binding_Type, Page_Count, Author, etc. Within Binding_Type, metadata would include possible bindings, material, etc. This contextual information of business data include meaning and content, policies that govern, technical attributes, specifications that transform, and programs that manipulate. == Definition == The metadata repository is responsible for physically storing and cataloging metadata. Data in a metadata repository should be generic, integrated, current, and historical: Generic Meta model should store the metadata by generic terms instead of storing it by an applications-specific defined way, so that if your data base standard changes from one product to another the physical meta model of the metadata repository would not need to change. Integration of the metadata repository allows all business areas' metadata to be in an integrated fashion: Covering all domains and subject areas of the organization. current and historical The metadata repository should have accessible current and historical metadata. Metadata repositories used to be referred to as a data dictionary. With the transition of needs for the metadata usage for business intelligence has increased so is the scope of the metadata repository increased. Earlier data dictionaries are the closest place to interact technology with business. Data dictionaries are the universe of metadata repository in the initial stages but as the scope increased Business glossary and their tags to variety of status flags emerged in the business side while consumption of the technology metadata, their lineage and linkages made the repository, the source for valuable reports to bring business and technology together and helped data management decisions easier as well as assess the cost of the changes. Metadata repository explores the enterprise wide data governance, data quality and master data management (includes master data and reference data) and integrates this wealth of information with integrated metadata across the organization to provide decision support system for data structures, even though it only reflects the structures consumed from various systems. == Repository vs. registry == Repository has additional functionalities compared with registry. Metadata repository not only stores metadata like Metadata registry but also adds relationships with related metadata types. Metadata when related in a flow from its point of entry into organization up to the deliverables is considered as the lineage of that data point. Metadata when related across other related metadata types is called linkages. By providing the relationships to all the metadata points across the organization and maintaining its integrity with an architecture to handle the changes, metadata repository provides the basic material for understanding the complete data flow and their definitions and their impact. Also the important feature is to maintain the version control though this statement for contrasting is open for discussion. These definitions are still evolving, so the accuracy of the definitions needs refinement. The purpose of registry is to define the metadata element and maintained across the organization. And data models and other data management teams refer to the registry for any changes to follow. While Metadata repository sources metadata from various metadata systems in the organizations and reflects what is in the upstream. Repository never acts as an upstream while registry is used as an upstream for metadata changes. == Reason for use == Metadata repository enables all the structure of the organizations data containers to one integrated place. This opens plethora of resourceful information for making calculated business decisions. This tool uses one generic form of data model to integrate all the models thus brings all the applications and programs of the organization into one format. And on top of it applying the business definitions and business processes brings the business and technology closer that will help organizations make reliable roadmaps with definite goals. With one stop information, business will have more control on the changes, and can do impact analysis of the tool. Usually business spends much time and money to make decisions based on discovery and research on impacts to make changes or to add new data structures or remove structures in data management of the organization. With a structured and well maintained repository, moving the product from ideation to delivery takes the least amount of time (considering other variables are constant). To sum it up: Integration of the metadata across the organization Build relationship between various metadata types Build relationship between various disparate systems Define business golden copy of definitions Version control of the changes at structure level Interaction with Reference data Link view to master data Automatic synchronization with various authorized metadata source systems More control to business decisions Validate the structures by overlapping the models Discovering discrepancies, gaps, lineage, metrics at data structure level Each database management system (DBMS) and database tools have their own language for the metadata components within. Database applications already have their own repositories or registries that are expected to provide all of the necessary functionality to access the data stored within. Vendors do not want other companies to be capable of easily migrating data away from their products and into competitors products, so they are proprietary with the way they handle metadata. CASE tools, DBMS dictionaries, ETL tools, data cleansing tools, OLAP tools, and data mining tools all handle and store metadata differently. Only a metadata repository can be designed to store the metadata components from all of these tools. == Design == Metadata repositories should store metadata in four classifications: ownership, descriptive characteristics, rules and policies, and physical characteristics. Ownership, showing the data owner and the application owner. The descriptive characteristics, define the names, types and lengths, and definitions describing business data or business processes. Rules and policies, will define security, data cleanliness, timelines for data, and relationships. Physical characteristics define the origin or source, and physical location. Like building a logical data model for creating a database, a logical meta model can help identify the metadata requirements for business data. The metadata repository will be centralized, decentralized, or distributed. A centralized design means that there is one database for the metadata repository that stores metadata for all applications business wide. A centralized metadata repository has the same advantages and disadvantages of a centralized database. Easier to manage because all the data is in one database, but the disadvantage is that bottlenecks may occur. A decentralized metadata repository stores metadata in multiple databases, either separated by location and or departments of the business. This makes management of the repository more involved than a centraliz

    Read more →
  • Unfold (app)

    Unfold (app)

    Unfold is a mobile application that allows users to create social media content using a variety of templates and other tools. It was founded in 2018 by Alfonso Cobo and Andy McCune. It enables users to add photos, video, and text with a variety of tools. In 2019, Unfold was acquired by Squarespace. == History == In January 2017, Alfonso Cobo was studying at Parsons School of Design when he realized there was no software or app that could create a portfolio of his work on an iPad. Cobo created an app called Portfolio, a basic version of a portfolio layout app, and the first one to exist for iPad. He launched it in 2017. After launching the first version of Portfolio, Cobo realized the more popular market and use case was on mobile. Around that time, Instagram was launching Stories. As a result, Cobo pivoted the app away from portfolios and instead focused on an app to showcase one's stories. Cobo later contacted Andy McCune, founder of social media account Earth, to collaborate with Unfold. Unfold also partnered with various companies to create custom templates. These include Equinox, Tommy Hilfiger, NARS, Billboard Music Awards, and Product Red. Unfold also launched a collection of Product Red templates to help eliminate HIV/AIDS in several African countries. In 2019, Squarespace acquired Unfold. The Unfold app has been downloaded over 60 million times and has been used to create over 1 billion Instagram stories. == Features == With Unfold, users can utilize hundreds of templates to make social content for social media platforms such as Instagram, Snapchat, and Facebook. The free app offers users basic templates and standard fonts, filters, and stickers, and there are also premium templates available for a monthly subscription. With Unfold+ and Unfold Pro (previously Unfold for Brands), users can access premium templates and tools, as well as upload custom brand assets and fonts. In 2020, Unfold launched Bio Sites, which allows users to link to multiple sites and platforms.

    Read more →
  • ReRites

    ReRites

    ReRites (also known as RERITES, ReadingRites, Big Data Poetry) is a literary work of "Human + A.I. poetry" by David Jhave Johnston that used neural network models trained to generate poetry which the author then edited. ReRites won the Robert Coover Award for a Work of Electronic Literature in 2022. == About the project == The ReRites project began as a daily rite of writing with a neural network, expanded into a series of performances from which video documentation has been published online, and concluded with a set of 12 books and an accompanying book of essays published by Anteism Books in 2019. In Electronic Literature, Scott Rettberg describes the early phases of the project in 2016, when it bore the preliminary name Big Data Poetry. Jhave (the artist name that David Jhave Johnston goes by) describes the process of writing ReRites as a rite: "Every morning for 2 hours (normally 6:30–8:30am) I get up and edit the poetic output of a neural net. Deleting, weaving, conjugating, lineating, cohering. Re-writing. Re-wiring authorship: hybrid augmented enhanced evolutionary". There is video documentation of the writing process. The human editing of the neural network's output is fundamental to this project, and Jhave gives examples of both unedited text extracts and his edited versions in publications about the project. Kyle Booten describes ReRites as "simultaneously dusty and outrageously verdant, monotonously sublime and speckled with beautiful and rare specimens". === Performances === ReRites was first shared with an audience through a series of performances where audience members and poets would participate in reading the automatically generated texts, which appeared on screen so fast that human readers could barely keep up. This has been described as allowing participants to "re-discover[..] the peculiar pleasures of being embodied", or, in Jhave's own words, as a space where human participants were "playing their wits and voices against an evocative infinite deep-learning muse". The first performance was at Brown University's Interrupt Festival in 2019. It has been performed many times since, including at the Barbican Centre in London and Anteism Books. === Print publications === For a single year Jhave published one book of poetry from the ReRites project each month. These twelve volumes are accompanied by a book of essays, all published by Anteism Books. The accompanying essays provide critical responses to the project from poets and scholars including Allison Parrish, Johanna Drucker, Kyle Booten, Stephanie Strickland, John Cayley, Lai-Tze Fan, Nick Montfort, Mairéad Byrne, and Chris Funkhouser. Allison Parrish notes elsewhere that these paratexts to ReRites serve a legitimising function for a genre of poetry that is not yet institutionally acknowledged. === Technical details === Starting in 2016 under the name Big Data Poetry, Jhave generated poems using, in his own words, "neural network code (..) adapted from three corporate github-hosted machine-learning libraries: TensorFlow (Google), PyTorch (Facebook), and AWD-LSTM (SalesForce)". He explains that the "models were trained on a customised corpus of 600,000 lines of poetry ranging from the romantic epoch to the 20th century avant garde". Jhave maintains a GitHub repository with some of the code supporting ReRites. == Reception == ReRites is described by John Cayley as "one of the most thorough and beautiful" poetic responses to machine learning. The work's influence on the field of electronic literature was acknowledged in 2022, when the work won the Electronic Literature Organization's Robert Coover Award for a Work of Electronic Literature. The jury described ReRites as particularly poignant in the time of the pandemic, as it was "a documentation of the performance of the private ritual of writing and the obsessive-compulsive need for writers to communicate — even when no one else is reading". The question of authorship and voice in ReRites has been raised by several critics. Although generated poetry is an established genre in electronic literature, Cayley notes that unlike the combinatory poems created by authors like Nick Montfort, where the author explicitly defines which words and phrases will be recombined, ReRites has "not been directed by literary preconceptions inscribed in the program itself, but only by patterns and rhythms pre-existing in the corpora". In an essay for the Australian journal TEXT, David Thomas Henry Wright asks how to understand authorship and authority in ReRites: "Who or what is the authority of the work? The original data fed into the machine, that is not currently retrievable or discernible from the final works? The code that was taken and adapted for his purposes? Or Jhave, the human editor?" Wright concludes that Jhave is the only actor with any intentionality and therefore the authority of the work. The centrality of the human editor is also emphasised by other scholars. In a chapter analysing ReRites Malthe Stavning Erslev argues that the machine learning misrepresents the dataset it is trained on. While ReRites uses 21st century neural networks, it has been compared to earlier literary traditions. Poet Victoria Stanton, who read at one of the ReRites performances, has compared ReRites to found poetry, while David Thomas Henry Wright compares it to the Oulipo movement and Mark Amerika to the cut-up technique. Scholars also position ReRites firmly within the long tradition of generative poetry both in electronic literature and print, stretching from the I Ching, Queneau's Cent Mille Milliards de Poemes and Nabokov's Pale Fire to computer-generated poems like Christopher Strachey's Love Letter Generator (1952) and more contemporary examples. Jhave describes the process of working with the output from the neural network as "carving". In his book My Life as an Artificial Creative Intelligence, Mark Amerika writes that the "method of carving the digital outputs provided by the language model as part of a collaborative remix jam session with GPT-2, where the language artist and the language model play off each other’s unexpected outputs as if caught in a live postproduction set, is one I share with electronic literature composer David Jhave Johnston, whose AI poetry experiments precede my own investigations."

    Read more →
  • Zolostays

    Zolostays

    Zolostays is a real-tech co-living focused startup that provides ready-to-move rooms/beds. It was founded in 2015 by Nikhil Sikri, Akhil Sikri and Sneha Choudhry. == Overview == During the pandemic, Zolo provided 75 of rent-free accommodation to those who lost their jobs. Zolo uses bulk inventory in usually residential township and ties up with real estate companies to make the rooms/beds available. Zolostays has both revenue sharing and leased model. == History == Zolostays was founded in 2015 to solve the problem of students and young professionals who would move to temporarily go to other cities to study and work and look for affordable housing. In 2020, it was operating in 10 Indian cities. It has four round of funding, with total $98 million.

    Read more →
  • Security.txt

    Security.txt

    security.txt is an accepted standard for website security information that allows security researchers to report security vulnerabilities easily. The standard prescribes a text file named security.txt in the well known location, similar in syntax to robots.txt but intended to be machine and human readable, for those wishing to contact a website's owner about security issues. security.txt files have been adopted by Google, GitHub, LinkedIn, and Facebook. == History == The Internet Draft was first submitted by Edwin Foudil in September 2017. At that time it covered four directives, "Contact", "Encryption", "Disclosure" and "Acknowledgement". Foudil expected to add further directives based on feedback. In addition, web security expert Scott Helme said he had seen positive feedback from the security community while use among the top 1 million websites was "as low as expected right now". In 2019, the Cybersecurity and Infrastructure Security Agency (CISA) published a draft binding operational directive that requires all US federal agencies to publish a security.txt file within 180 days. The Internet Engineering Steering Group (IESG) issued a Last Call for security.txt in December 2019 which ended on January 6, 2020. A study in 2021 found that over ten percent of top-100 websites published a security.txt file, with the percentage of sites publishing the file decreasing as more websites were considered. The study also noted a number of discrepancies between the standard and the content of the file. In April 2022 the security.txt file has been accepted by Internet Engineering Task Force (IETF) as RFC 9116. == File format == security.txt files can be served under the /.well-known/ directory (i.e. /.well-known/security.txt) or the top-level directory (i.e. /security.txt) of a website. The file must be served over HTTPS and in plaintext format.

    Read more →