AI Analytics Ui

AI Analytics Ui — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Linux color management

  Linux color management has the same goal as the color management systems (CMS) for other operating systems, which is to achieve the best possible color reproduction throughout an imaging workflow from its source (camera, video, scanner, etc.), through imaging software (Digikam, darktable, RawTherapee, GIMP, Krita, Scribus, etc.), and finally onto an output medium (monitor, video projector, printer, etc.). In particular, color management attempts to enable color consistency across media and throughout a color-managed workflow. Linux color management relies on the use of accurate ICC (International Color Consortium) and DCP (DNG Color Profile) profiles describing the behavior of input and output devices, and color-managed applications that are aware of these profiles. These applications perform gamut conversions between device profiles and color spaces. Gamut conversions, based on accurate device profiles, are the essence of color management. Historically, color management was not an initial design consideration of the X Window System on which much of Linux graphics support rests, and thus color-managed workflows have been somewhat more challenging to implement on Linux than on other OS's such as Microsoft Windows or macOS. This situation is now being progressively remedied, and color management under Linux, while functional, has not yet acquired mature status. Although it is now possible to obtain a consistent color-managed workflow under Linux, certain problems still remain: The absence of a central user control panel for color settings. Some hardware devices for color calibration lack Linux drivers, firmware or accessory data. Since ICC color profiles are written to an open specification, they are compatible across operating systems. Hence, a profile produced on one OS should work on any other OS given the availability of the necessary software to read it and perform the gamut conversions. This can be used as a workaround for the lack of support for certain spectrophotometers or colorimeters under Linux: one can simply produce a profile on a different OS and then use it in a Linux workflow. Additionally, certain hardware, such as most printers and certain monitors, can be calibrated under another OS and then used in a fully color-managed workflow on Linux. The popular Ubuntu Linux distribution added initial color management in the 11.10 release (the "Oneiric Ocelot" release). == Requirements for a color-managed workflow == Accurate device profiles obtained with source or output characterization software. Correctly loaded video card lookup tables (LUTs) (or monitor profiles that do not require LUT adjustments). Color-managed applications that are configured to use a correct monitor profile and input/output profiles, with support for control over the rendering intent and black point compensation. Calibration and profiling requires: for input devices (scanner, camera, etc.) a color target which the profiling software will compare to the manufacturer-provided color values of the target. or for output devices (monitor, printer, etc.) a reading with a specific device (spectrophotometer, colorimeter or spectrocolorimeter) of the color patch values and comparing the measured values against the values originally sent for output. === Monitor calibration and profiling === One of the critical elements in any color-managed workflow is the monitor, because, at one step or another, handling and making color adaptation through imaging software is required for most images, thus the ability of the monitor to present accurate colors is crucial. Monitor color management consists of calibration and profiling. The first step, calibration, is done by adjusting the monitor controls and the output of the graphics card (via calibration curves) to match user-definable characteristics, such as brightness, white point and gamma. The calibration settings are stored in a .cal file. The second step, profiling (characterization), involves measuring the calibrated display's response and recording it in a color profile. The profile is stored in an .icc file ("ICC file"). For convenience, the calibration settings are usually stored together with the profile in the ICC file. Note that .icm files are identical to .icc files - the difference is only in the name. Seeing correct colors requires using a monitor profile-aware application, together with the same calibration used when profiling the monitor. Calibration alone does not yield accurate colors. If a monitor was calibrated before it was profiled, the profile will only yield correct colors when used on the monitor with the same calibration (the same monitor control adjustments and the same calibration curves loaded into the video card's lookup table). macOS has built-in support for loading calibration curves and installing a system-wide color profile. Windows 7 onward allows loading calibration curves, though this functionality must be enabled manually. Linux and older versions of Windows require using a standalone LUT loader. === Device profiles === ICC profiles are cross-platform and can thus be created on other operating systems and used under Linux. Monitor profiles, however, require some additional attention. Since a monitor profile depends both on the monitor itself and on the video card, a monitor profile should only be used with the same monitor and video card with which it was created. The monitor settings should not be adjusted after creating the profile. In addition, since most calibration software use LUT adjustments during calibration, the corresponding LUTs must be loaded every time the display server (X11, Wayland) is started (e.g. with every graphical login). In the unlikely case of a colorimeter being unsupported by Linux, a profile created under Windows or macOS can be used under Linux. === Display-channel lookup tables === There are two approaches to loading display channel LUTs: Create a profile that does not modify video card LUTs and thus does not require LUTs be loaded later on. Ideally, this approach would rely on DDC-capable monitors—the internal monitor settings of which are set via calibration software. Unfortunately, monitors capable of making these adjustments through DDC are not common and are generally expensive. There is only one calibration software on Linux that can interact with a DDC monitor. For mainstream monitors, a couple of options exist: BasICColor software, which works with most colorimeters on the market, allows one to adjust display output via the monitor interface, and then to choose a "Profile, do not calibrate" option. By doing this, one can create a profile that does not require video card LUT adjustments. For EyeOne devices, EyeOne Match allows the user to calibrate to "Native" gamma and white point targets, which results in the LUT adjustment curves displayed after the calibration as a simple, linear 1:1 mapping (a straight line from corner to corner). Both BasICColor and EyeOne Match do not presently run under Linux but they are capable of creating a profile that does not require LUT adjustments. Use an LUT loader to actually load the LUT adjustments contained within the profile prepared during calibration. According to the documentation, these loaders do not modify the video card LUT by itself, but achieve the same type of adjustment by modifying the X server gamma ramp. Loaders are available for Linux distributions that use X.org or XFree86—the two most popular X servers on Linux. Other X servers are not guaranteed to work with the currently available loaders. There are two LUT loaders available for Linux: Xcalib is one such loader, and although it is a command-line utility, it is quite easy to use. dispwin is a part of Argyll CMS. If, for any reason, the LUT cannot be loaded, it is still recommended to go through the initial stages of calibration where a user is asked by calibration software to make some manual adjustments to the monitor, as this will often improve display linearity and also provide information on its color temperature. This is especially recommended for CRT monitors. === Color-managed applications === In ICC-aware applications, it is important to make sure the correct profiles are assigned to devices, mainly to the monitor and the printer. Some Linux applications can auto-detect the monitor profile, while others requires that it is specified manually. Although there is no designated place to store device profiles on Linux, /usr/share/color/icc/ has become the de facto standard. Most applications running under WINE have not been fully tested for color accuracy. While 8-bpp programs can have some color resolution difficulties due to depth conversion errors, colors in higher-depth applications should be accurate, as long as those programs perform their gamut conversions based on the same monitor profile as that used for loading the LUT, granted that the corresponding LUT adjustments are loaded. == List of color-managed applications == darktabl

  Read more →
• 

  Characteristic samples

  Characteristic samples is a concept in the field of grammatical inference, related to passive learning. In passive learning, an inference algorithm I {\displaystyle I} is given a set of pairs of strings and labels S {\displaystyle S} , and returns a representation R {\displaystyle R} that is consistent with S {\displaystyle S} . Characteristic samples consider the scenario when the goal is not only finding a representation consistent with S {\displaystyle S} , but finding a representation that recognizes a specific target language. A characteristic sample of language L {\displaystyle L} is a set of pairs of the form ( s , l ( s ) ) {\displaystyle (s,l(s))} where: l ( s ) = 1 {\displaystyle l(s)=1} if and only if s ∈ L {\displaystyle s\in L} l ( s ) = − 1 {\displaystyle l(s)=-1} if and only if s ∉ L {\displaystyle s\notin L} Given the characteristic sample S {\displaystyle S} , I {\displaystyle I} 's output on it is a representation R {\displaystyle R} , e.g. an automaton, that recognizes L {\displaystyle L} . == Formal Definition == === The Learning Paradigm associated with Characteristic Samples === There are three entities in the learning paradigm connected to characteristic samples, the adversary, the teacher and the inference algorithm. Given a class of languages C {\displaystyle \mathbb {C} } and a class of representations for the languages R {\displaystyle \mathbb {R} } , the paradigm goes as follows: The adversary A {\displaystyle A} selects a language L ∈ C {\displaystyle L\in \mathbb {C} } and reports it to the teacher The teacher T {\displaystyle T} then computes a set of strings and label them correctly according to L {\displaystyle L} , trying to make sure that the inference algorithm will compute L {\displaystyle L} The adversary can add correctly labeled words to the set in order to confuse the inference algorithm The inference algorithm I {\displaystyle I} gets the sample and computes a representation R ∈ R {\displaystyle R\in \mathbb {R} } consistent with the sample. The goal is that when the inference algorithm receives a characteristic sample for a language L {\displaystyle L} , or a sample that subsumes a characteristic sample for L {\displaystyle L} , it will return a representation that recognizes exactly the language L {\displaystyle L} . === Sample === Sample S {\displaystyle S} is a set of pairs of the form ( s , l ( s ) ) {\displaystyle (s,l(s))} such that l ( s ) ∈ { − 1 , 1 } {\displaystyle l(s)\in \{-1,1\}} ==== Sample consistent with a language ==== We say that a sample S {\displaystyle S} is consistent with language L {\displaystyle L} if for every pair ( s , l ( s ) ) {\displaystyle (s,l(s))} in S {\displaystyle S} : l ( s ) = 1 if and only if s ∈ L {\displaystyle l(s)=1{\text{ if and only if }}s\in L} l ( s ) = − 1 if and only if s ∉ L {\displaystyle l(s)=-1{\text{ if and only if }}s\notin L} === Characteristic sample === Given an inference algorithm I {\displaystyle I} and a language L {\displaystyle L} , a sample S {\displaystyle S} that is consistent with L {\displaystyle L} is called a characteristic sample of L {\displaystyle L} for I {\displaystyle I} if: I {\displaystyle I} 's output on S {\displaystyle S} is a representation R {\displaystyle R} that recognizes L {\displaystyle L} . For every sample D {\displaystyle D} that is consistent with L {\displaystyle L} and also fulfils S ⊆ D {\displaystyle S\subseteq D} , I {\displaystyle I} 's output on D {\displaystyle D} is a representation R {\displaystyle R} that recognizes L {\displaystyle L} . A Class of languages C {\displaystyle \mathbb {C} } is said to have charistaristic samples if every L ∈ C {\displaystyle L\in \mathbb {C} } has a characteristic sample. == Related Theorems == === Theorem === If equivalence is undecidable for a class C {\textstyle \mathbb {C} } over Σ {\textstyle \Sigma } of cardinality bigger than 1, then C {\textstyle \mathbb {C} } doesn't have characteristic samples. ==== Proof ==== Given a class of representations C {\textstyle \mathbb {C} } such that equivalence is undecidable, for every polynomial p ( x ) {\displaystyle p(x)} and every n ∈ N {\displaystyle n\in \mathbb {N} } , there exist two representations r 1 {\displaystyle r_{1}} and r 2 {\displaystyle r_{2}} of sizes bounded by n {\displaystyle n} , that recognize different languages but are inseparable by any string of size bounded by p ( n ) {\displaystyle p(n)} . Assuming this is not the case, we can decide if r 1 {\displaystyle r_{1}} and r 2 {\displaystyle r_{2}} are equivalent by simulating their run on all strings of size smaller than p ( n ) {\displaystyle p(n)} , contradicting the assumption that equivalence is undecidable. === Theorem === If S 1 {\displaystyle S_{1}} is a characteristic sample for L 1 {\displaystyle L_{1}} and is also consistent with L 2 {\displaystyle L_{2}} , then every characteristic sample of L 2 {\displaystyle L_{2}} , is inconsistent with L 1 {\displaystyle L_{1}} . ==== Proof ==== Given a class C {\textstyle \mathbb {C} } that has characteristic samples, let R 1 {\displaystyle R_{1}} and R 2 {\displaystyle R_{2}} be representations that recognize L 1 {\displaystyle L_{1}} and L 2 {\displaystyle L_{2}} respectively. Under the assumption that there is a characteristic sample for L 1 {\displaystyle L_{1}} , S 1 {\displaystyle S_{1}} that is also consistent with L 2 {\displaystyle L_{2}} , we'll assume falsely that there exist a characteristic sample for L 2 {\displaystyle L_{2}} , S 2 {\displaystyle S_{2}} that is consistent with L 1 {\displaystyle L_{1}} . By the definition of characteristic sample, the inference algorithm I {\displaystyle I} must return a representation which recognizes the language if given a sample that subsumes the characteristic sample itself. But for the sample S 1 ∪ S 2 {\displaystyle S_{1}\cup S_{2}} , the answer of the inferring algorithm needs to recognize both L 1 {\displaystyle L_{1}} and L 2 {\displaystyle L_{2}} , in contradiction. === Theorem === If a class is polynomially learnable by example based queries, it is learnable with characteristic samples. == Polynomialy characterizable classes == === Regular languages === The proof that DFA's are learnable using characteristic samples, relies on the fact that every regular language has a finite number of equivalence classes with respect to the right congruence relation, ∼ L {\displaystyle \sim _{L}} (where x ∼ L y {\displaystyle x\sim _{L}y} for x , y ∈ Σ ∗ {\displaystyle x,y\in \Sigma ^{}} if and only if ∀ z ∈ Σ ∗ : x z ∈ L ↔ y z ∈ L {\displaystyle \forall z\in \Sigma ^{}:xz\in L\leftrightarrow yz\in L} ). Note that if x {\displaystyle x} , y {\displaystyle y} are not congruent with respect to ∼ L {\displaystyle \sim _{L}} , there exists a string z {\displaystyle z} such that x z ∈ L {\displaystyle xz\in L} but y z ∉ L {\displaystyle yz\notin L} or vice versa, this string is called a separating suffix. ==== Constructing a characteristic sample ==== The construction of a characteristic sample for a language L {\displaystyle L} by the teacher goes as follows. Firstly, by running a depth first search on a deterministic automaton A {\displaystyle A} recognizing L {\displaystyle L} , starting from its initial state, we get a suffix closed set of words, W {\displaystyle W} , ordered in shortlex order. From the fact above, we know that for every two states in the automaton, there exists a separating suffix that separates between every two strings that the run of A {\displaystyle A} on them ends in the respective states. We refer to the set of separating suffixes as S {\displaystyle S} . The labeled set (sample) of words the teacher gives the adversary is { ( w , l ( w ) ) | w ∈ W ⋅ S ∪ W ⋅ Σ ⋅ S } {\displaystyle \{(w,l(w))|w\in W\cdot S\cup W\cdot \Sigma \cdot S\}} where l ( w ) {\displaystyle l(w)} is the correct label of w {\displaystyle w} (whether it is in L {\displaystyle L} or not). We may assume that ϵ ∈ S {\displaystyle \epsilon \in S} . ==== Constructing a deterministic automata ==== Given the sample from the adversary W {\displaystyle W} , the construction of the automaton by the inference algorithm I {\displaystyle I} starts with defining P = prefix ( W ) {\displaystyle P={\text{prefix}}(W)} and S = suffix ( W ) {\displaystyle S={\text{suffix}}(W)} , which are the set of prefixes and suffixes of W {\displaystyle W} respectively. Now the algorithm constructs a matrix M {\displaystyle M} where the elements of P {\displaystyle P} function as the rows, ordered by the shortlex order, and the elements of S {\displaystyle S} function as the columns, ordered by the shortlex order. Next, the cells in the matrix are filled in the following manner for prefix p i {\displaystyle p_{i}} and suffix s j {\displaystyle s_{j}} : If p i s j ∈ W → M i j = l ( p i s j ) {\displaystyle p_{i}s_{j}\in W\rightarrow M_{ij}=l(p_{i}s_{j})} else, M i j = 0 {\displaystyle M_{ij}=0} Now, we say row i {\displaystyle i} and t {\displaystyle t} are distinguishable if there exi

  Read more →
• 

  Jpred

  Jpred v.4 is the latest version of the JPred Protein Secondary Structure Prediction Server which provides predictions by the JNet algorithm, one of the most accurate methods for secondary structure prediction, that has existed since 1998 in different versions. In addition to protein secondary structure, JPred also makes predictions of solvent accessibility and coiled-coil regions. The JPred service runs up to 134 000 jobs per month and has carried out over 2 million predictions in total for users in 179 countries. == JPred 2 == The static HTML pages of JPred 2 are still available for reference. == JPred 3 == The JPred v3 followed on from previous versions of JPred developed and maintained by James Cuff and Jonathan Barber (see JPred References). This release added new functionality and fixed many bugs. The highlights are: New, friendlier user interface Retrained and optimised version of Jnet (v2) - mean secondary structure prediction accuracy of >81% Batch submission of jobs Better error checking of input sequences/alignments Predictions now (optionally) returned via e-mail Users may provide their own query names for each submission JPred now makes a prediction even when there are no PSI-BLAST hits to the query PS/PDF output now incorporates all the predictions == JPred 4 == The current version of JPred (v4) has the following improvements and updates incorporated: Retrained on the latest UniRef90 and SCOPe/ASTRAL version of Jnet (v2.3.1) - mean secondary structure prediction accuracy of >82%. Upgraded the Web Server to the latest technologies (Bootstrap framework, JavaScript) and updating the web pages – improving the design and usability through implementing responsive technologies. Added RESTful API and mass-submission and results retrieval scripts - resulting in peak throughput above 20,000 predictions per day. Added prediction jobs monitoring tools. Upgraded the results reporting – both, on the web-site, and through the optional email summary reports: improved batch submission, added results summary preview through Jalview results visualization summary in SVG and adding full multiple sequence alignments into the reports. Improved help-pages, incorporating tool-tips, and adding one-page step-by-step tutorials. Sequence residues are categorised or assigned to one of the secondary structure elements, such as alpha-helix, beta-sheet and coiled-coil. Jnet uses two neural networks for its prediction. The first network is fed with a window of 17 residues over each amino acid in the alignment plus a conservation number. It uses a hidden layer of nine nodes and has three output nodes, one for each secondary structure element. The second network is fed with a window of 19 residues (the result of first network) plus the conservation number. It has a hidden layer with nine nodes and has three output nodes.

  Read more →
• 

  Alternating decision tree

  An alternating decision tree (ADTree) is a machine learning method for classification. It generalizes decision trees and has connections to boosting. An ADTree consists of an alternation of decision nodes, which specify a predicate condition, and prediction nodes, which contain a single number. An instance is classified by an ADTree by following all paths for which all decision nodes are true, and summing any prediction nodes that are traversed. == History == ADTrees were introduced by Yoav Freund and Llew Mason. However, the algorithm as presented had several typographical errors. Clarifications and optimizations were later presented by Bernhard Pfahringer, Geoffrey Holmes and Richard Kirkby. Implementations are available in Weka and JBoost. == Motivation == Original boosting algorithms typically used either decision stumps or decision trees as weak hypotheses. As an example, boosting decision stumps creates a set of T {\displaystyle T} weighted decision stumps (where T {\displaystyle T} is the number of boosting iterations), which then vote on the final classification according to their weights. Individual decision stumps are weighted according to their ability to classify the data. Boosting a simple learner results in an unstructured set of T {\displaystyle T} hypotheses, making it difficult to infer correlations between attributes. Alternating decision trees introduce structure to the set of hypotheses by requiring that they build off a hypothesis that was produced in an earlier iteration. The resulting set of hypotheses can be visualized in a tree based on the relationship between a hypothesis and its "parent." Another important feature of boosted algorithms is that the data is given a different distribution at each iteration. Instances that are misclassified are given a larger weight while accurately classified instances are given reduced weight. == Alternating decision tree structure == An alternating decision tree consists of decision nodes and prediction nodes. Decision nodes specify a predicate condition. Prediction nodes contain a single number. ADTrees always have prediction nodes as both root and leaves. An instance is classified by an ADTree by following all paths for which all decision nodes are true and summing any prediction nodes that are traversed. This is different from binary classification trees such as CART (Classification and regression tree) or C4.5 in which an instance follows only one path through the tree. === Example === The following tree was constructed using JBoost on the spambase dataset (available from the UCI Machine Learning Repository). In this example, spam is coded as 1 and regular email is coded as −1. The following table contains part of the information for a single instance. The instance is scored by summing all of the prediction nodes through which it passes. In the case of the instance above, the score is calculated as The final score of 0.657 is positive, so the instance is classified as spam. The magnitude of the value is a measure of confidence in the prediction. The original authors list three potential levels of interpretation for the set of attributes identified by an ADTree: Individual nodes can be evaluated for their own predictive ability. Sets of nodes on the same path may be interpreted as having a joint effect The tree can be interpreted as a whole. Care must be taken when interpreting individual nodes as the scores reflect a re weighting of the data in each iteration. == Description of the algorithm == The inputs to the alternating decision tree algorithm are: A set of inputs ( x 1 , y 1 ) , … , ( x m , y m ) {\displaystyle (x_{1},y_{1}),\ldots ,(x_{m},y_{m})} where x i {\displaystyle x_{i}} is a vector of attributes and y i {\displaystyle y_{i}} is either -1 or 1. Inputs are also called instances. A set of weights w i {\displaystyle w_{i}} corresponding to each instance. The fundamental element of the ADTree algorithm is the rule. A single rule consists of a precondition, a condition, and two scores. A condition is a predicate of the form "attribute value." A precondition is simply a logical conjunction of conditions. Evaluation of a rule involves a pair of nested if statements: 1 if (precondition) 2 if (condition) 3 return score_one 4 else 5 return score_two 6 end if 7 else 8 return 0 9 end if Several auxiliary functions are also required by the algorithm: W + ( c ) {\displaystyle W_{+}(c)} returns the sum of the weights of all positively labeled examples that satisfy predicate c {\displaystyle c} W − ( c ) {\displaystyle W_{-}(c)} returns the sum of the weights of all negatively labeled examples that satisfy predicate c {\displaystyle c} W ( c ) = W + ( c ) + W − ( c ) {\displaystyle W(c)=W_{+}(c)+W_{-}(c)} returns the sum of the weights of all examples that satisfy predicate c {\displaystyle c} The algorithm is as follows: 1 function ad_tree 2 input Set of m training instances 3 4 wi = 1/m for all i 5 a = 1 2 ln W + ( t r u e ) W − ( t r u e ) {\displaystyle a={\frac {1}{2}}{\textrm {ln}}{\frac {W_{+}(true)}{W_{-}(true)}}} 6 R0 = a rule with scores a and 0, precondition "true" and condition "true." 7 P = { t r u e } {\displaystyle {\mathcal {P}}=\{true\}} 8 C = {\displaystyle {\mathcal {C}}=} the set of all possible conditions 9 for j = 1 … T {\displaystyle j=1\dots T} 10 p ∈ P , c ∈ C {\displaystyle p\in {\mathcal {P}},c\in {\mathcal {C}}} get values that minimize z = 2 ( W + ( p ∧ c ) W − ( p ∧ c ) + W + ( p ∧ ¬ c ) W − ( p ∧ ¬ c ) ) + W ( ¬ p ) {\displaystyle z=2\left({\sqrt {W_{+}(p\wedge c)W_{-}(p\wedge c)}}+{\sqrt {W_{+}(p\wedge \neg c)W_{-}(p\wedge \neg c)}}\right)+W(\neg p)} 11 P + = p ∧ c + p ∧ ¬ c {\displaystyle {\mathcal {P}}+=p\wedge c+p\wedge \neg c} 12 a 1 = 1 2 ln W + ( p ∧ c ) + 1 W − ( p ∧ c ) + 1 {\displaystyle a_{1}={\frac {1}{2}}{\textrm {ln}}{\frac {W_{+}(p\wedge c)+1}{W_{-}(p\wedge c)+1}}} 13 a 2 = 1 2 ln W + ( p ∧ ¬ c ) + 1 W − ( p ∧ ¬ c ) + 1 {\displaystyle a_{2}={\frac {1}{2}}{\textrm {ln}}{\frac {W_{+}(p\wedge \neg c)+1}{W_{-}(p\wedge \neg c)+1}}} 14 Rj = new rule with precondition p, condition c, and weights a1 and a2 15 w i = w i e − y i R j ( x i ) {\displaystyle w_{i}=w_{i}e^{-y_{i}R_{j}(x_{i})}} 16 end for 17 return set of Rj The set P {\displaystyle {\mathcal {P}}} grows by two preconditions in each iteration, and it is possible to derive the tree structure of a set of rules by making note of the precondition that is used in each successive rule. == Empirical results == Figure 6 in the original paper demonstrates that ADTrees are typically as robust as boosted decision trees and boosted decision stumps. Typically, equivalent accuracy can be achieved with a much simpler tree structure than recursive partitioning algorithms.

  Read more →
• 

  Algorithmic probability

  In algorithmic information theory, algorithmic probability, also known as Solomonoff probability, is a mathematical method of assigning a prior probability to a given observation. It was invented by Ray Solomonoff in the 1960s. It is used in inductive inference theory and analyses of algorithms. In his general theory of inductive inference, Solomonoff uses the method together with Bayes' rule to obtain probabilities of prediction for an algorithm's future outputs. In the mathematical formalism used, the observations have the form of finite binary strings viewed as outputs of Turing machines, and the universal prior is a probability distribution over the set of finite binary strings calculated from a probability distribution over programs (that is, inputs to a universal Turing machine). The prior is universal in the Turing-computability sense, i.e. no string has zero probability. It is not computable, but it can be approximated. Formally, the probability P {\displaystyle P} is not a probability and it is not computable. It is only "lower semi-computable" and a "semi-measure". By "semi-measure", it means that 0 ≤ ∑ x P ( x ) < 1 {\displaystyle 0\leq \sum _{x}P(x)<1} . That is, the "probability" does not actually sum up to one, unlike actual probabilities. This is because some inputs to the Turing machine causes it to never halt, which means the probability mass allocated to those inputs is lost. By "lower semi-computable", it means there is a Turing machine that, given an input string x {\displaystyle x} , can print out a sequence y 1 < y 2 < ⋯ {\displaystyle y_{1} Read more →

• 

  Grammatical evolution

  Grammatical evolution (GE) is a genetic programming (GP) technique (or approach) from evolutionary computation pioneered by Conor Ryan, JJ Collins and Michael O'Neill in 1998 at the BDS Group in the University of Limerick. As in any other GP approach, the objective is to find an executable program, program fragment, or function, which will achieve a good fitness value for a given objective function. In most published work on GP, a LISP-style tree-structured expression is directly manipulated, whereas GE applies genetic operators to an integer string, subsequently mapped to a program (or similar) through the use of a grammar, which is typically expressed in Backus–Naur form. One of the benefits of GE is that this mapping simplifies the application of search to different programming languages and other structures. == Problem addressed == In type-free, conventional Koza-style GP, the function set must meet the requirement of closure: all functions must be capable of accepting as their arguments the output of all other functions in the function set. Usually, this is implemented by dealing with a single data-type such as double-precision floating point. While modern Genetic Programming frameworks support typing, such type-systems have limitations that Grammatical Evolution does not suffer from. == GE's solution == GE offers a solution to the single-type limitation by evolving solutions according to a user-specified grammar (usually a grammar in Backus-Naur form). Therefore, the search space can be restricted, and domain knowledge of the problem can be incorporated. The inspiration for this approach comes from a desire to separate the "genotype" from the "phenotype": in GP, the objects the search algorithm operates on and what the fitness evaluation function interprets are one and the same. In contrast, GE's "genotypes" are ordered lists of integers which code for selecting rules from the provided context-free grammar. The phenotype, however, is the same as in Koza-style GP: a tree-like structure that is evaluated recursively. This model is more in line with how genetics work in nature, where there is a separation between an organism's genotype and the final expression of phenotype in proteins, etc. Separating genotype and phenotype allows a modular approach. In particular, the search portion of the GE paradigm needn't be carried out by any one particular algorithm or method. Observe that the objects GE performs search on are the same as those used in genetic algorithms. This means, in principle, that any existing genetic algorithm package, such as the popular GAlib, can be used to carry out the search, and a developer implementing a GE system need only worry about carrying out the mapping from list of integers to program tree. It is also in principle possible to perform the search using some other method, such as particle swarm optimization (see the remark below); the modular nature of GE creates many opportunities for hybrids as the problem of interest to be solved dictates. Brabazon and O'Neill have successfully applied GE to predicting corporate bankruptcy, forecasting stock indices, bond credit ratings, and other financial applications. GE has also been used with a classic predator-prey model to explore the impact of parameters such as predator efficiency, niche number, and random mutations on ecological stability. It is possible to structure a GE grammar that for a given function/terminal set is equivalent to genetic programming. == Criticism == Despite its successes, GE has been the subject of some criticism. One issue is that as a result of its mapping operation, GE's genetic operators do not achieve high locality which is a highly regarded property of genetic operators in evolutionary algorithms. == Variants == Although GE was originally described in terms of using an Evolutionary Algorithm, specifically, a Genetic Algorithm, other variants exist. For example, GE researchers have experimented with using particle swarm optimization to carry out the searching instead of genetic algorithms with results comparable to that of normal GE; this is referred to as a "grammatical swarm"; using only the basic PSO model it has been found that PSO is probably equally capable of carrying out the search process in GE as simple genetic algorithms are. (Although PSO is normally a floating-point search paradigm, it can be discretized, e.g., by simply rounding each vector to the nearest integer, for use with GE.) Yet another possible variation that has been experimented with in the literature is attempting to encode semantic information in the grammar in order to further bias the search process. Other work showed that, with biased grammars that leverage domain knowledge, even random search can be used to drive GE. == Related work == GE was originally a combination of the linear representation as used by the Genetic Algorithm for Developing Software (GADS) and Backus Naur Form grammars, which were originally used in tree-based GP by Wong and Leung in 1995 and Whigham in 1996. Other related work noted in the original GE paper was that of Frederic Gruau, who used a conceptually similar "embryonic" approach, as well as that of Keller and Banzhaf, which similarly used linear genomes. == Implementations == There are several implementations of GE. These include the following.

  Read more →
• 

  Q-learning

  Q-learning is a reinforcement learning algorithm that trains an agent to assign values to its possible actions based on its current state, without requiring a model of the environment (model-free). It can handle problems with stochastic transitions and rewards without requiring adaptations. For example, in a grid maze, an agent learns to reach an exit worth 10 points. At a junction, Q-learning might assign a higher value to moving right than left if right gets to the exit faster, improving this choice by trying both directions over time. For any finite Markov decision process, Q-learning finds an optimal policy in the sense of maximizing the expected value of the total reward over any and all successive steps, starting from the current state. Q-learning can identify an optimal action-selection policy for any given finite Markov decision process, given infinite exploration time and a partly random policy. "Q" refers to the function that the algorithm computes: the expected reward—that is, the quality—of an action taken in a given state. == Reinforcement learning == Reinforcement learning involves an agent, a set of states S {\displaystyle {\mathcal {S}}} , and a set A {\displaystyle {\mathcal {A}}} of actions per state. By performing an action a ∈ A {\displaystyle a\in {\mathcal {A}}} , the agent transitions from state to state. Executing an action in a specific state provides the agent with a reward (a numerical score). The goal of the agent is to maximize its total reward. It does this by adding the maximum reward attainable from future states to the reward for achieving its current state, effectively influencing the current action by the potential future reward. This potential reward is a weighted sum of expected values of the rewards of all future steps starting from the current state. As an example, consider the process of boarding a train, in which the reward is measured by the negative of the total time spent boarding (alternatively, the cost of boarding the train is equal to the boarding time). One strategy is to enter the train door as soon as they open, minimizing the initial wait time for yourself. If the train is crowded, however, then you will have a slow entry after the initial action of entering the door as people are fighting you to depart the train as you attempt to board. The total boarding time, or cost, is then: 0 seconds wait time + 15 seconds fight time On the next day, by random chance (exploration), you decide to wait and let other people depart first. This initially results in a longer wait time. However, less time is spent fighting the departing passengers. Overall, this path has a higher reward than that of the previous day, since the total boarding time is now: 5 second wait time + 0 second fight time Through exploration, despite the initial (patient) action resulting in a larger cost (or negative reward) than in the forceful strategy, the overall cost is lower, thus revealing a more rewarding strategy. == Algorithm == After Δ t {\displaystyle \Delta t} steps into the future the agent will decide some next step. The weight for this step is calculated as γ Δ t {\displaystyle \gamma ^{\Delta t}} , where γ {\displaystyle \gamma } (the discount factor) is a number between 0 and 1 ( 0 ≤ γ ≤ 1 {\displaystyle 0\leq \gamma \leq 1} ). Assuming γ < 1 {\displaystyle \gamma <1} , it has the effect of valuing rewards received earlier higher than those received later (reflecting the value of a "good start"). γ {\displaystyle \gamma } may also be interpreted as the probability to succeed (or survive) at every step Δ t {\displaystyle \Delta t} . The algorithm, therefore, has a function that calculates the quality of a state–action combination: Q : S × A → R {\displaystyle Q:{\mathcal {S}}\times {\mathcal {A}}\to \mathbb {R} } . Before learning begins, ⁠ Q {\displaystyle Q} ⁠ is initialized to a possibly arbitrary fixed value (chosen by the programmer). Then, at each time t {\displaystyle t} the agent selects an action A t {\displaystyle A_{t}} , observes a reward R t + 1 {\displaystyle R_{t+1}} , enters a new state S t + 1 {\displaystyle S_{t+1}} (that may depend on both the previous state S t {\displaystyle S_{t}} and the selected action), and Q {\displaystyle Q} is updated. The core of the algorithm is a Bellman equation as a simple value iteration update, using the weighted average of the current value and the new information: Q n e w ( S t , A t ) ← ( 1 − α ⏟ learning rate ) ⋅ Q ( S t , A t ) ⏟ current value + α ⏟ learning rate ⋅ ( R t + 1 ⏟ reward + γ ⏟ discount factor ⋅ max a Q ( S t + 1 , a ) ⏟ estimate of optimal future value ⏟ new value (temporal difference target) ) {\displaystyle Q^{new}(S_{t},A_{t})\leftarrow (1-\underbrace {\alpha } _{\text{learning rate}})\cdot \underbrace {Q(S_{t},A_{t})} _{\text{current value}}+\underbrace {\alpha } _{\text{learning rate}}\cdot {\bigg (}\underbrace {\underbrace {R_{t+1}} _{\text{reward}}+\underbrace {\gamma } _{\text{discount factor}}\cdot \underbrace {\max _{a}Q(S_{t+1},a)} _{\text{estimate of optimal future value}}} _{\text{new value (temporal difference target)}}{\bigg )}} where R t + 1 {\displaystyle R_{t+1}} is the reward received when moving from the state S t {\displaystyle S_{t}} to the state S t + 1 {\displaystyle S_{t+1}} , and α {\displaystyle \alpha } is the learning rate ( 0 < α ≤ 1 ) {\displaystyle (0<\alpha \leq 1)} . Note that Q n e w ( S t , A t ) {\displaystyle Q^{new}(S_{t},A_{t})} is the sum of three terms: ( 1 − α ) Q ( S t , A t ) {\displaystyle (1-\alpha )Q(S_{t},A_{t})} : the current value (weighted by one minus the learning rate) α R t + 1 {\displaystyle \alpha \,R_{t+1}} : the reward R t + 1 {\displaystyle R_{t+1}} to obtain if action A t {\displaystyle A_{t}} is taken when in state S t {\displaystyle S_{t}} (weighted by learning rate) α γ max a Q ( S t + 1 , a ) {\displaystyle \alpha \gamma \max _{a}Q(S_{t+1},a)} : the maximum reward that can be obtained from state S t + 1 {\displaystyle S_{t+1}} (weighted by learning rate and discount factor) An episode of the algorithm ends when state S t + 1 {\displaystyle S_{t+1}} is a final or terminal state. However, Q-learning can also learn in non-episodic tasks (as a result of the property of convergent infinite series). If the discount factor is lower than 1, the action values are finite even if the problem can contain infinite loops or paths. For all final states s f {\displaystyle s_{f}} , Q ( s f , a ) {\displaystyle Q(s_{f},a)} is never updated, but is set to the reward value r {\displaystyle r} observed for state s f {\displaystyle s_{f}} . In most cases, Q ( s f , a ) {\displaystyle Q(s_{f},a)} can be taken to equal zero. == Influence of variables == === Learning rate === The learning rate or step size determines to what extent newly acquired information overrides old information. A factor of 0 makes the agent learn nothing (exclusively exploiting prior knowledge), while a factor of 1 makes the agent consider only the most recent information (ignoring prior knowledge to explore possibilities). In fully deterministic environments, a learning rate of α t = 1 {\displaystyle \alpha _{t}=1} is optimal. When the problem is stochastic, the algorithm converges under some technical conditions on the learning rate that require it to decrease to zero. In practice, often a constant learning rate is used, such as α t = 0.1 {\displaystyle \alpha _{t}=0.1} for all t {\displaystyle t} . === Discount factor === The discount factor ⁠ γ {\displaystyle \gamma } ⁠ determines the importance of future rewards. A factor of 0 will make the agent "myopic" (or short-sighted) by only considering current rewards, i.e. r t {\displaystyle r_{t}} (in the update rule above), while a factor approaching 1 will make it strive for a long-term high reward. If the discount factor meets or exceeds 1, the action values may diverge. For ⁠ γ = 1 {\displaystyle \gamma =1} ⁠, without a terminal state, or if the agent never reaches one, all environment histories become infinitely long, and utilities with additive, undiscounted rewards generally become infinite. Even with a discount factor only slightly lower than 1, Q-function learning leads to propagation of errors and instabilities when the value function is approximated with an artificial neural network. In that case, starting with a lower discount factor and increasing it towards its final value accelerates learning. === Initial conditions (Q0) === Since Q-learning is an iterative algorithm, it implicitly assumes an initial condition before the first update occurs. High initial values, also known as "optimistic initial conditions", can encourage exploration: no matter what action is selected, the update rule will cause it to have lower values than the other alternative, thus increasing their choice probability. The first reward r {\displaystyle r} can be used to reset the initial conditions. According to this idea, the first time an action is taken the reward is used to set the value

  Read more →
• 

  Fitness approximation

  Fitness approximation aims to approximate the objective or fitness functions in evolutionary optimization by building up machine learning models based on data collected from numerical simulations or physical experiments. The machine learning models for fitness approximation are also known as meta-models or surrogates, and evolutionary optimization based on approximated fitness evaluations are also known as surrogate-assisted evolutionary approximation. Fitness approximation in evolutionary optimization can be seen as a sub-area of data-driven evolutionary optimization. == Approximate models in function optimization == === Motivation === In many real-world optimization problems including engineering problems, the number of fitness function evaluations needed to obtain a good solution dominates the optimization cost. In order to obtain efficient optimization algorithms, it is crucial to use prior information gained during the optimization process. Conceptually, a natural approach to utilizing the known prior information is building a model of the fitness function to assist in the selection of candidate solutions for evaluation. A variety of techniques for constructing such a model, often also referred to as surrogates, metamodels or approximation models – for computationally expensive optimization problems have been considered. === Approaches === Common approaches to constructing approximate models based on learning and interpolation from known fitness values of a small population include: Low-degree polynomials and regression models Fourier surrogate modeling Artificial neural networks including Multilayer perceptrons Radial basis function network Support vector machines Due to the limited number of training samples and high dimensionality encountered in engineering design optimization, constructing a globally valid approximate model remains difficult. As a result, evolutionary algorithms using such approximate fitness functions may converge to local optima. Therefore, it can be beneficial to selectively use the original fitness function together with the approximate model.

  Read more →
• 

  Google Mobile Services

  Google Mobile Services (GMS) is a collection of proprietary applications and application programming interfaces (APIs) services from Google that are typically pre-installed on the majority of Android devices, such as smartphones, tablets, and smart TVs. GMS is not a part of the Android Open Source Project (AOSP), which means an Android manufacturer needs to obtain a license from Google in order to legally pre-install GMS on an Android device. This license is provided by Google without any licensing fees except in the EU. == Core applications == The following are core applications that are part of Google Mobile Services: Google Search Google Chrome YouTube Google Play Google Drive Gmail Google Meet Google Maps Google Photos Google TV YouTube Music === Historically === Google+ Google Hangouts Google Wallet Google Play Magazines Google Play Music Google Play Movies & TV Google Duo == Reception, competitors, and regulators == === FairSearch === Numerous European firms filed a complaint to the European Commission stating that Google had manipulated their power and dominance within the market to push their Services to be used by phone manufacturers. The firms were joined under the name FairSearch, and the main firms included were Microsoft, Expedia, TripAdvisor, Nokia and Oracle. FairSearch's major problem with Google's practices was that they believed Google were forcing phone manufacturers to use their Mobile Services. They claimed Google managed this by asking these manufacturers to sign a contract stating that they must preinstall specific Google Mobile Services, such as Maps, Search and YouTube, in order to get the latest version of Android. Google swiftly responded stating that they "continue to work co-operatively with the European Commission". === Aptoide === The third-party Android app store Aptoide also filed an EU competition complaint against Google once again stating that they are misusing their power within the market. Aptoide alleged that Google was blocking third-party app stores from being on Google Play, as well as blocking Google Chrome from downloading any third-party apps and app stores. As of June 2014, Google had not responded to these allegations. === Abuse of Android dominance === In May 2019, Umar Javeed, Sukarma Thapar, Aaqib Javeed vs. Google LLC & Ors. the Competition Commission of India ordered an antitrust probe against Google for abusing its dominant position with Android to block market rivals. In Prima Facie opinion the commission held that mandatory pre-installation of the entire Google Mobile Services (GMS) suite, under Mobile Application Distribution Agreements (MADA), amounts to the imposition of unfair conditions on the device manufacturers. === EU antitrust ruling === On July 18, 2018, the European Commission fined Google €4.34 billion for breaching EU antitrust rules which resulted in a change of licensing policy for the GMS in the EU. A new paid licensing agreement for smartphones and tablets shipped into the EEA was created. The change is that the GMS is now decoupled from the base Android and will be offered under a separate paid licensing agreement. === Privacy policy === At the same time, Google faced problems with various European data protection agencies, most notably In the United Kingdom and France. The problem they faced was that they had a set of 60 rules merged into one, which allowed Google to "track users more closely". Google once again came out and stated that their new policies still abide by European Union laws. === Android distributions without Google Mobile Services === After surveillance and privacy concerns, several custom android distributions have been implemented, such as GrapheneOS, LineageOS, CalyxOS, iodéOS or /e/OS, and they come either without any GMS installed by default or with microG, that adds a compatibility layer.

  Read more →
• 

  L-1 Identity Solutions

  L-1 Identity Solutions, Inc. was an American biometric technology company headquartered in Stamford, Connecticut, specializing in identity management products and services including facial recognition systems, fingerprint readers, and secure credentialing solutions for governments and commercial enterprises. The company's shares traded on the New York Stock Exchange under the ticker symbol "ID." == History == L-1 Identity Solutions was formed on August 29, 2006, from a merger of Viisage Technology, Inc. and Identix Incorporated. Prior to the Safran acquisition, L-1 divested its Intelligence Services Group (ISG) comprising SpecTal LLC, Advanced Concepts Inc., and McClendon LLC to BAE Systems, Inc. for approximately $297 million. The transaction, initially announced in September 2010, closed on February 15, 2011, with more than 1,000 ISG employees joining BAE Systems' Intelligence & Security sector. It specializes in selling face recognition systems, electronic passports, such as Fly Clear, and other biometric technology to governments such as the United States and Saudi Arabia. It also licenses technology to other companies internationally, including China. On July 26, 2011, Safran (NYSE Euronext Paris: SAF) acquired L-1 Identity Solutions, Inc. for a total cash amount of USD 1.09 billion. L-1 was part of Morpho's MorphoTrust department which rebranded to Idemia in 2017. Bioscrypt is a biometrics research, development and manufacturing company purchased by L-1 Identity Solutions. It provides fingerprint IP readers for physical access control systems, Facial recognition system readers for contactless access control authentication and OEM fingerprint modules for embedded applications. According to IMS Research, Bioscrypt has been the world market leader in biometric access control for enterprises (since 2006) with a worldwide market share of over 13%. In 2011, Bioscrypt was sold to Safran Morpho.

  Read more →
• 

  Dendrogram

  A dendrogram is a diagram representing a tree graph. This diagrammatic representation is frequently used in different contexts: in hierarchical clustering, it illustrates the arrangement of the clusters produced by the corresponding analyses. in computational biology, it shows the clustering of genes or samples, sometimes in the margins of heatmaps. in phylogenetics, it displays the evolutionary relationships among various biological taxa. In this case, the dendrogram is also called a phylogenetic tree. The name dendrogram derives from the two ancient greek words δένδρον (déndron), meaning "tree", and γράμμα (grámma), meaning "drawing, mathematical figure". == Clustering example == For a clustering example, suppose that five taxa ( a {\displaystyle a} to e {\displaystyle e} ) have been clustered by UPGMA based on a matrix of genetic distances. The hierarchical clustering dendrogram would show a column of five nodes representing the initial data (here individual taxa), and the remaining nodes represent the clusters to which the data belong, with the arrows representing the distance (dissimilarity). The distance between merged clusters is monotone, increasing with the level of the merger: the height of each node in the plot is proportional to the value of the intergroup dissimilarity between its two daughters (the nodes on the right representing individual observations all plotted at zero height).

  Read more →
• 

  Dispersive flies optimisation

  Dispersive flies optimisation (DFO) is a bare-bones swarm intelligence algorithm which is inspired by the swarming behaviour of flies hovering over food sources. DFO is a simple optimiser which works by iteratively trying to improve a candidate solution with regard to a numerical measure that is calculated by a fitness function. Each member of the population, a fly or an agent, holds a candidate solution whose suitability can be evaluated by their fitness value. Optimisation problems are often formulated as either minimisation or maximisation problems. DFO was introduced with the intention of analysing a simplified swarm intelligence algorithm with the fewest tunable parameters and components. In the first work on DFO, this algorithm was compared against a few other existing swarm intelligence techniques using error, efficiency and diversity measures. It is shown that despite the simplicity of the algorithm, which only uses agents’ position vectors at time t to generate the position vectors for time t + 1, it exhibits a competitive performance. Since its inception, DFO has been used in a variety of applications including medical imaging and image analysis as well as data mining and machine learning. == Algorithm == DFO bears many similarities with other existing continuous, population-based optimisers (e.g. particle swarm optimization and differential evolution). In that, the swarming behaviour of the individuals consists of two tightly connected mechanisms, one is the formation of the swarm and the other is its breaking or weakening. DFO works by facilitating the information exchange between the members of the population (the swarming flies). Each fly x {\displaystyle \mathbf {x} } represents a position in a d-dimensional search space: x = ( x 1 , x 2 , … , x d ) {\displaystyle \mathbf {x} =(x_{1},x_{2},\ldots ,x_{d})} , and the fitness of each fly is calculated by the fitness function f ( x ) {\displaystyle f(\mathbf {x} )} , which takes into account the flies' d dimensions: f ( x ) = f ( x 1 , x 2 , … , x d ) {\displaystyle f(\mathbf {x} )=f(x_{1},x_{2},\ldots ,x_{d})} . The pseudocode below represents one iteration of the algorithm: for i = 1 : N flies x i . fitness = f ( x i ) {\displaystyle \mathbf {x_{i}} .{\text{fitness}}=f(\mathbf {x} _{i})} end for i x s {\displaystyle \mathbf {x} _{s}} = arg min [ f ( x i ) ] , i ∈ { 1 , … , N } {\textstyle [f(\mathbf {x} _{i})],\;i\in \{1,\ldots ,N\}} for i = 1 : N and i ≠ s {\displaystyle i\neq s} for d = 1 : D dimensions if U ( 0 , 1 ) < Δ {\displaystyle U(0,1)<\Delta } x i d t + 1 = U ( x min , d , x max , d ) {\displaystyle x_{id}^{t+1}=U(x_{\min ,d},x_{\max ,d})} else x i d t + 1 = x i n d t + U ( 0 , 1 ) ( x s d t − x i d t ) {\displaystyle x_{id}^{t+1}=x_{i_{nd}}^{t}+U(0,1)(x_{sd}^{t}-x_{id}^{t})} end if end for d end for i In the algorithm above, x i d t + 1 {\displaystyle x_{id}^{t+1}} represents fly i {\displaystyle i} at dimension d {\displaystyle d} and time t + 1 {\displaystyle t+1} ; x i n d t {\displaystyle x_{i_{nd}}^{t}} presents x i {\displaystyle x_{i}} 's best neighbouring fly in ring topology (left or right, using flies indexes), at dimension d {\displaystyle d} and time t {\displaystyle t} ; and x s d t {\displaystyle x_{sd}^{t}} is the swarm's best fly. Using this update equation, the swarm's population update depends on each fly's best neighbour (which is used as the focus μ {\displaystyle \mu } , and the difference between the current fly and the best in swarm represents the spread of movement, σ {\displaystyle \sigma } ). Other than the population size N {\displaystyle N} , the only tunable parameter is the disturbance threshold Δ {\displaystyle \Delta } , which controls the dimension-wise restart in each fly vector. This mechanism is proposed to control the diversity of the swarm. Other notable minimalist swarm algorithm is Bare bones particle swarms (BB-PSO), which is based on particle swarm optimisation, along with bare bones differential evolution (BBDE) which is a hybrid of the bare bones particle swarm optimiser and differential evolution, aiming to reduce the number of parameters. Alhakbani in her PhD thesis covers many aspects of the algorithms including several DFO applications in feature selection as well as parameter tuning. == Applications == Some of the recent applications of DFO are listed below: Optimising support vector machine kernel to classify imbalanced data Quantifying symmetrical complexity in computational aesthetics Analysing computational autopoiesis and computational creativity Identifying calcifications in medical images Building non-identical organic structures for game's space development Deep Neuroevolution: Training Deep Neural Networks for False Alarm Detection in Intensive Care Units Identification of animation key points from 2D-medialness maps

  Read more →
• 

  Sycophancy (artificial intelligence)

  In the field of artificial intelligence, sycophancy is a tendency of large language models (LLMs) and other AI assistants to tailor their responses to what they predict the user wants to hear rather than to what is accurate or warranted. The behavior takes several forms: an assistant may agree with a user's stated opinion even when the user is mistaken; it may abandon a correct answer after a challenge such as "are you sure?"; it may validate beliefs, decisions or self-presentation regardless of merit; or it may praise the user, their work or their ideas in unwarranted terms. The word is borrowed from the ordinary English term for fawning flattery, and is used in AI alignment and AI safety research to describe a class of misalignment failures associated with training on human feedback. Researchers at Anthropic first documented the behavior systematically in 2022. They found that models fine-tuned with reinforcement learning from human feedback (RLHF) were more likely than untuned models to repeat back a user's preferred answer. A 2023 follow-up paper, "Towards Understanding Sycophancy in Language Models", showed that five frontier assistants from OpenAI, Anthropic and Meta all exhibited the behavior, and traced its origin to biases in the human preference data used during training. Later work documented sycophancy in mathematics, medicine, academic peer review and other domains, and identified a broader category called "social sycophancy" affecting an assistant's emotional and interpersonal responses. The issue drew widespread public attention in April 2025 after OpenAI rolled back an update to its GPT-4o model. Users had reported that the assistant praised dangerous decisions, endorsed delusional thinking and offered exaggerated compliments for trivial prompts. OpenAI's post-mortem attributed the change in behavior to an additional training signal based on user thumbs-up and thumbs-down feedback. That episode, together with reporting in The New York Times, Rolling Stone and elsewhere on users drawn into delusional thinking through prolonged chatbot interaction, has been cited in litigation and in academic studies as evidence that sycophancy poses risks to user well-being. Proposed mitigations include fine-tuning on synthetic data that rewards disagreement with incorrect user statements, editing the small subset of model parameters causally responsible for the behavior, changes to the dialogue or system prompt, and benchmarks designed to surface sycophantic behavior before models are released. == Causes == The dominant explanation points to RLHF, the standard technique for aligning chat assistants with user expectations. Human annotators rank candidate model responses; a reward model is trained to predict those rankings; and the language model is then optimized against the reward model. Because human raters tend to prefer outputs that confirm their existing beliefs or flatter their work, the pipeline systematically rewards responses that agree with the annotator. Perez and colleagues at Anthropic published the first large-scale empirical evidence of the effect in 2022. They reported that RLHF training increased the probability that a model would repeat back a dialog user's preferred answer, and that larger models exhibited the behavior more strongly. Sharma and colleagues, the following year, went further and examined Anthropic's own preference data directly. Both the human raters and the reward models trained on their judgments preferred convincingly written sycophantic responses to truthful ones at a non-negligible rate. Wei and co-authors at Google DeepMind found similar results in the PaLM family, observing that both model scale and instruction tuning increased sycophancy on opinion questions. The behavior is often classified as a form of reward hacking, in which an optimization process exploits a flaw in its reward signal rather than achieving the intended objective. OpenAI's post-mortem of the April 2025 GPT-4o incident identified a more specific mechanism. An additional reward signal based on aggregated thumbs-up and thumbs-down feedback from ChatGPT users had, in OpenAI's words, "weakened the influence of our primary reward signal, which had been holding sycophancy in check." Separately, an Anthropic interpretability paper from 2025 located a linear direction in a model's internal activations corresponding to sycophantic behavior, and showed that such "persona vectors" could be used to flag sycophancy-inducing training data and to steer models away from the trait at inference time. == Measurement == The Anthropic team released SycophancyEval with its 2023 paper, supplying test sets for each of the four canonical behaviors. Two further benchmarks from Stanford followed in 2025. SycEval, applied to mathematical and medical reasoning tasks, reported an overall sycophancy rate of 58 per cent across the GPT-4o, Claude and Gemini models tested. ELEPHANT, aimed at social sycophancy, found that the eleven LLMs evaluated affirmed posts that the Reddit community r/AmITheAsshole had judged inappropriate in 42 per cent of cases, and preserved a user's face 45 percentage points more often than human respondents did. Domain-specific benchmarks have followed. BrokenMath tests robustness to plausible-looking but false mathematical claims drawn from competition problems, and reports that the best evaluated model was sycophantic in 29 per cent of cases. SYCON-Bench measures how many dialogue turns are required before a model abandons a correct position. Visual sycophancy in multimodal models has been examined with MM-SY and PENDULUM. A 2026 study by researchers at the Massachusetts Institute of Technology reported that personalization features, which adapt assistants to individual users over repeated sessions, can intensify social sycophancy. == Notable incidents == === GPT-4o rollback (April 2025) === On 25 April 2025, OpenAI completed the rollout of an update to GPT-4o, the default model used in ChatGPT at the time. Within days, users reported that the assistant had begun praising trivial messages in extravagant terms, endorsing impulsive or dangerous decisions, and reinforcing strong emotional statements without pushback. Widely shared examples included the model congratulating a user who reported stopping prescribed psychiatric medication, and praising a business plan to sell "shit on a stick" as venture-capital ready. OpenAI's chief executive, Sam Altman, wrote on 27 April that recent updates had made the model "too sycophant-y and annoying" and said fixes were in progress. The company began reverting the update on 28 April and completed the rollback for free users by 30 April. Two post-mortems followed: a short note on 29 April and a longer technical follow-up, "Expanding on what we missed with sycophancy", on 2 May. Both attributed the regression to a new training signal based on user thumbs-up and thumbs-down feedback, to inadequate pre-launch evaluation for sycophantic drift, and to the dismissal of qualitative concerns raised by internal testers before release. Reporting in CNN, Fortune and Bloomberg News treated the incident as a turning point in public awareness of the problem. === Chatbot-related psychological harm === From mid-2025 onward, news reports began to link sycophantic chatbot behavior to acute psychological harm. In June 2025, The New York Times technology reporter Kashmir Hill published an investigation centered on Eugene Torres, a Manhattan accountant with no history of mental illness, who developed a sustained delusional episode after a series of conversations with ChatGPT about simulation theory. According to the article, the assistant encouraged Torres to stop taking prescribed medication, to cut off friends and family, and at one point told him that he could fly from a nineteen-story building if he "truly believed". Futurism and Rolling Stone ran parallel investigations documenting other cases in which heavy use of ChatGPT had been associated with delusional thinking, involuntary commitment or, in at least one case, the death of a user with a pre-existing psychiatric diagnosis. A 2026 paper by researchers at the Massachusetts Institute of Technology and the University of Washington put forward a formal Bayesian model. It showed that even an ideally rational user could be drawn into what the authors call "delusional spiraling" when interacting with a sufficiently sycophantic assistant, and that the effect was not eliminated by suppressing hallucinations or by warning users in advance. The lawsuit Raine v. OpenAI, filed in San Francisco Superior Court in August 2025 by the parents of a sixteen-year-old who had died by suicide, alleges that "heightened sycophancy" was a design feature of ChatGPT that contributed to their son's death; it is the first wrongful-death suit against a large language-model provider. === Wider commentary === Mainstream coverage in outlets including The New York Times, The Washington Pos

  Read more →
• 

  Evolutionary multimodal optimization

  In applied mathematics, multimodal optimization deals with optimization tasks that involve finding all or most of the multiple (at least locally optimal) solutions of a problem, as opposed to a single best solution. Evolutionary multimodal optimization is a branch of evolutionary computation, which is closely related to machine learning. Wong provides a short survey, wherein the chapter of Shir and the book of Preuss cover the topic in more detail. == Motivation == Knowledge of multiple solutions to an optimization task is especially helpful in engineering, when due to physical (and/or cost) constraints, the best results may not always be realizable. In such a scenario, if multiple solutions (locally and/or globally optimal) are known, the implementation can be quickly switched to another solution and still obtain the best possible system performance. Multiple solutions could also be analyzed to discover hidden properties (or relationships) of the underlying optimization problem, which makes them important for obtaining domain knowledge. In addition, the algorithms for multimodal optimization usually not only locate multiple optima in a single run, but also preserve their population diversity, resulting in their global optimization ability on multimodal functions. Moreover, the techniques for multimodal optimization are usually borrowed as diversity maintenance techniques to other problems. == Background == Classical techniques of optimization would need multiple restart points and multiple runs in the hope that a different solution may be discovered every run, with no guarantee however. Evolutionary algorithms (EAs) due to their population based approach, provide a natural advantage over classical optimization techniques. They maintain a population of possible solutions, which are processed every generation, and if the multiple solutions can be preserved over all these generations, then at termination of the algorithm we will have multiple good solutions, rather than only the best solution. Note that this is against the natural tendency of classical optimization techniques, which will always converge to the best solution, or a sub-optimal solution (in a rugged, “badly behaving” function). Finding and maintenance of multiple solutions is wherein lies the challenge of using EAs for multi-modal optimization. Niching is a generic term referred to as the technique of finding and preserving multiple stable niches, or favorable parts of the solution space possibly around multiple solutions, so as to prevent convergence to a single solution. The field of Evolutionary algorithms encompasses genetic algorithms (GAs), evolution strategy (ES), differential evolution (DE), particle swarm optimization (PSO), and other methods. Attempts have been made to solve multi-modal optimization in all these realms and most, if not all the various methods implement niching in some form or the other. == Multimodal optimization using genetic algorithms/evolution strategies == De Jong's crowding method, Goldberg's sharing function approach, Petrowski's clearing method, restricted mating, maintaining multiple subpopulations are some of the popular approaches that have been proposed by the community. The first two methods are especially well studied, however, they do not perform explicit separation into solutions belonging to different basins of attraction. The application of multimodal optimization within ES was not explicit for many years, and has been explored only recently. A niching framework utilizing derandomized ES was introduced by Shir, proposing the CMA-ES as a niching optimizer for the first time. The underpinning of that framework was the selection of a peak individual per subpopulation in each generation, followed by its sampling to produce the consecutive dispersion of search-points. The biological analogy of this machinery is an alpha-male winning all the imposed competitions and dominating thereafter its ecological niche, which then obtains all the sexual resources therein to generate its offspring. Recently, an evolutionary multiobjective optimization (EMO) approach was proposed, in which a suitable second objective is added to the originally single objective multimodal optimization problem, so that the multiple solutions form a weak pareto-optimal front. Hence, the multimodal optimization problem can be solved for its multiple solutions using an EMO algorithm. Improving upon their work, the same authors have made their algorithm self-adaptive, thus eliminating the need for pre-specifying the parameters. An approach that does not use any radius for separating the population into subpopulations (or species) but employs the space topology instead is proposed in.

  Read more →
• 

  Confirmatory blockmodeling

  Confirmatory blockmodeling is a deductive approach in blockmodeling, where a blockmodel (or part of it) is prespecify before the analysis, and then the analysis is fit to this model. When only a part of analysis is prespecify (like individual cluster(s) or location of the block types), it is called partially confirmatory blockmodeling. This is so-called indirect approach, where the blockmodeling is done on the blockmodel fitting (e.g., a priori hypothesized blockmodel). Opposite approach to the confirmatory blockmodeling is an inductive exploratory blockmodeling.

  Read more →