AI Analytics For Retail

AI Analytics For Retail — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Agent verification

    Agent verification

    Agent verification is activity to gain assurances that purposeful artificial constructs act in accordance with their specifications. While primitive forms of inorganic agents have been used in manufacturing for centuries, the study of artificial agents did not begin until the mid 20th century. Foundational work on such agents was closely bound with the emergence of artificial intelligence as an academic discipline. Early agents deployed for industrial control systems and in computing were often controlled by quite simple logic however, not involving artificial intelligence as such. When deployed as part of a multi-agent system, even such simple agents could require special agent orientated testing methods, as their collective behaviour was challenging to verify with traditional testing techniques. Difficulties in providing assurances that agents will not behave in dangerous ways became more prevalent after the introduction of LLM agents, especially after the rapid acceleration of their deployment in 2025. The verification of agent behaviour can be conducted by formal or informal methods. Informal verification requires less mathematical skill. But when agents are part of systems where errors have significant risks — such as danger to human life, environmental damage or major financial loss — formal verification is preferred. Both regulators and system designers themselves like formal verification as it provides a high degree of mathematical certainty. It is not however always possible to formally test all aspects of an agent based system's behaviour, especially where newer LLM based agents are concerned, due in part to their high degree of autonomy. Accordingly, agent verification for low impact deployments might be carried out only with informal methods, while for high impact deployments, it may be performed with a mix of formal and informal techniques. == Terminology == In academia, the term agent verification is often defined to mean activity concerned with gaining assurance that the agent behaves in accordance with its specification - whether by processes such as testing or simulation. 'Verification' is typically contrasted with 'validation', the latter meaning activity concerned with checking that the specification itself meets user or real world needs. Such definitions are not universally adhered to however - for example, in some workplaces and documents, the words 'verification' and 'validation' can be used synonymously. Efforts to gain confidence in Agents have intensified sharply since 2025 due to the rapid roll out of LLM agents; different terms are sometimes used in the commercial sector. Here the term 'agent verification' can be used in the same sense as it is in academia, but sometimes the same activity can be covered by more ambiguous and wider ranging terms such as 'Agent governance' , 'Agent observability' or 'AI agent policing'. == History == === Classical agents === The theoretical underpinnings for artificial (inorganic) agents emerged in the mid 20th century, with establishment of cybernetics and artificial intelligence. Oliver Selfridge's 1958 Pandemonium - A Paradigm for Learning paper was an important early theoretical contribution in establishing agent oriented architecture. Practical implementations of agents for real world applications began to become widespread in the 1990s, after the introduction of the belief–desire–intention software model (BDI), and agent-oriented programming. Pure digital agents were deployed in computer infrastructure for purposes such as monitoring, while agents connected to real-world sensors and actuators were increasingly used in industrial control systems. While the concept of artificial agents was interwoven with early artificial intelligence studies right from the start, early agents lacked general purpose reasoning capabilities, often only having simple if then logic. Even a device as simple as a thermostat, which has a sensor and a means of acting, can be considered a proto agent in this sense. Verifying the behaviours of a simple single agent system is not generally especially difficult, but it can be a different matter when several simple agents coexist in the same system. Craig Reynolds's work on boids showed that relatively complex, "intelligent" behaviour can emerge from a number of such simple agents working together in a Multi-agent system (MAS). By the 1990s, even the behaviour of a single agent system could sometimes be quite complex; in accordance with the Belief–desire–intention software model, agents could have believes that might evolve over time. Agents were increasingly introduced that were controlled by quite large decision tree models, which had new vulnerabilities to adversarial attack. It was becoming increasingly apparent that traditional software verification methods had limitations for testing such agents, or even for the more primitive type of agents when they were deployed as part of a MAS. It was the use of agents for industrial control systems, sometimes associated with robotics, that lent urgency to the practice of agent verification. Informal testing might be acceptable for digital agents used say to monitor whether each of an organisation's computers are properly licensed. But with an increasing potential for faulty agents to result in a failure that might cause a large fire to break out at a chemical manufacturing plant, a botched medical operation, or even a crashed aircraft, the need to develop reliable means of verifying behaviour of such agents was considered urgent. The Foundation for Intelligent Physical Agents was established in 1996. From the late 90s, a growing number of industry and university based scientists began working on the problem, with researchers publishing papers on the verification of both single and multi agent systems. Much of this work showed how formal verification techniques like model checking could be used to gain a high level of assurance that agent based systems would conform with their specification. A 2018 systematic review covering 231 studies found that model checking was the most common technique for agent verification, with theorem proving the second most commonly used formal verification method. In the first two decades of the 20th century, agents run by AI became more common, with Siri and Alexa being well known examples. But such agents still lacked general reasoning capabilities and did not pose new pressing problems for agent verification. === General purpose reasoning agents === The advent of LLMs created huge potential for further use of artificial agents, as agents based on them could have general purpose cognitive abilities. Agents run by LLMs (and occasionally non-LLM foundation models) have similar vulnerability to adversarial attack as those run by decision tree models. The wider scope of actions for LLM agents has created new challenges for their verification, over and above those present for classical agents. For example, the LLM's neural network endows it with infinite domains, an especial challenge for traditional formal verification techniques. Academics began to study the problems involved in verifying LLM agents from 2018. Deployment of such agents began to accelerate in late 2023 after OpenAI's "function-calling" API was made available, and especially after Anthropic's late 2024 introduction of Model Context Protocol (MCP), a standardised way for LLM agents to gain contextual awareness, and to act on the world by calling various external tools. The rapid rollout of LLM agents following MCP's release has seen the task of agent verification receive increased attention within academia, and also from the private sector. In 2024 and 2025 several startups focusing on LLM agent verification have been founded in both Europe and the US to meet growing demand. == Approaches == === Formal verification === Formal verification involves proving the correctness of some or all aspects of a system using mathematical methods. Such methods can range from manual formal proof, to verification assisted with automated theorem provers like Isabelle. For agent verification, model checking is by far the most frequently used formal verification method; for pre-LLM models it was often complemented with techniques using computation tree logic. Another common method is theorem proving. Formal verification provides a higher degree of confidence than informal methods, but it is not always used, even when it is possible. Sometimes a person or organisation developing software agents won't have the necessary skills, or may not see it as worth the effort if the agent(s) will not have the ability to cause much harm even if they malfunction. When agents are deployed in systems where errors could have serious consequences, the ability of formal verification methods to provide mathematical certainty tends to be strongly preferred by both regulators and designers themselves. But even for high impact systems, formal verificatio

    Read more →
  • Thirst trap

    Thirst trap

    A thirst trap is a type of social media post intended to entice viewers sexually. It refers to a viewer's "thirst", a colloquialism likening sexual frustration to dehydration, implying desperation, with the afflicted individual being described as "thirsty". The phrase entered into the lexicon in the late 1990s, but is most related to Internet slang that developed in the early 2010s. Its meaning has changed over time, previously referring to a graceless need for approval, affection or attention. == History == The term thirst trap originated within selfie culture, though its precise origins remain unclear. An early use of the phrase with reference to dehydration appears in the 1999 book Running for Dummies by Florence Griffith Joyner and John Hanc, where it referred to the deceptive sensation of thirst being quenched after initial fluid intake, advising continued hydration to avoid the so-called "thirst trap." The modern usage of thirst trap resurfaced around 2011 on platforms such as Twitter and Urban Dictionary, coinciding with the growing popularity of Snapchat, Instagram, and dating apps like Tinder and Grindr. In 2011, Urban Dictionary defined it as "any statement used to intentionally create attention or 'thirst'." By 2018, the term had entered mainstream discourse, appearing in outlets such as The New York Times and GQ without the need for explanation. == Usage of the term == Often, the term thirst trap describes an attractive picture of an individual that they post online. Thirst trap can also describe a digital heartthrob. For instance, former Canadian prime minister Justin Trudeau has been described as a political thirst trap. It has also been described as a modern form of "fishing for compliments". == Motivation == Thirst trapping may be driven by a variety of motives. Individuals often seek attention through "likes" and comments on social media, which can offer a temporary sense of validation and improved self-esteem. It can also serve as an outlet for expressing one's sexuality or enhancing a personal brand. In some cases, sharing such content may provide financial gain. Others might post thirst traps to cope with emotional distress, such as after breakup, or to spite a former lover. Sharing a thirst trap has also been used as a way to connect in times of social isolation (e.g. COVID-19 pandemic). From a physiological standpoint, endorphins and neurotransmitters like oxytocin and dopamine are released during sexual contact. It has been speculated outside of the academic setting that sharing and engaging with thirst traps may elicit similar pleasure responses. == Methodology == Methodologies have developed to take an optimal thirst trap photo. Reporting for Vice magazine, Graham Isador found several of his social network contacts spent a lot of time considering how to take the best photo and what text they should use. They considered angles and lighting. Sometimes they made use of the self-timer feature available on some cameras. Often, body parts are put on display without being too explicit (e.g. bulges of male genitalia, breast cleavage, abdominal muscles, pectoral muscles, backs, buttocks). Often, the thirst trap is accompanied by a caption. For instance, in October 2019, actress Tracee Ellis Ross posted bikini pictures on Instagram with a caption that included the message: "I've worked so hard to feel good in my skin and to build a life that truly matches me and I'm in it and it feels good. ... No filter, no retouch 47 year old thirst trap! Boom!" On Instagram, #ThirstTrapThursdays is a popular tag. Followers reply in turn after a posting. == Variations == "Gatsbying" is a variation of the thirst trap, where one puts posts on social media to attract the attention of a particular individual. The term alludes to the novel The Great Gatsby where the character Jay Gatsby would throw extravagant parties to attract the attention of his love interest, Daisy. "Instagrandstanding" is an alternative name for this. "Wholesome trapping" has developed, where one posts pictures of more meaningful aspects of life, such as spending time with friends or doing outdoor activities. == Criticism == Psychotherapist Lisa Brateman has criticized thirst traps as an unhealthy method of receiving external validation. This desire for external validation can be addictive. Thirst traps can cause pressure to maintain a good physical appearance, and therefore cause self-esteem issues. Additionally, thirst traps are often highly choreographed and thus present a distorted perception of reality. The manufacturing of thirst traps can be limited when one enters a relationship or with time as the body ages. In some cases, thirst traps can lead to harassment and online bullying. In April 2020, model Chrissy Teigen posted a video of herself wearing a black one-piece swimsuit, and she received a multitude of negative comments that constituted bullying and body shaming.

    Read more →
  • Personal web page

    Personal web page

    Personal web pages are World Wide Web pages created by an individual to contain content of a personal nature rather than content pertaining to a company, organization or institution. Personal web pages are primarily used for informative or entertainment purposes but can also be used for personal career marketing (by containing a list of the individual's skills, experience and a CV), social networking with other people with shared interests, or as a space for personal expression. These terms do not usually refer to just a single "page" or HTML file, but to a website—a collection of webpages and related files under a common URL or Web address. In strictly technical terms, a site's actual home page (index page) often only contains sparse content with some catchy introductory material and serves mostly as a pointer or table of contents to the more content-rich pages inside, such as résumés, family, hobbies, family genealogy, a web log/diary ("blog"), opinions, online journals and diaries or other writing, examples of written work, digital audio sound clips, digital video clips, digital photos, or information about a user's other interests. Many personal pages only include information of interest to friends and family of the author. However, some webpages set up by hobbyists or enthusiasts of certain subject areas can be valuable topical web directories. == History == In the 1990s, most Internet service providers (ISPs) provided a free small personal, user-created webpage along with free Usenet News service. These were all considered part of full Internet service. Also several free web hosting services such as GeoCities provided free web space for personal web pages. These free web hosting services would typically include web-based site management and a few pre-configured scripts to easily integrate an input form or guestbook script into the user's site. Early personal web pages were often called "home pages" and were intended to be set as a default page in a web browser's preferences, usually by their owner. These pages would often contain links, to-do lists, and other information their author found useful. In the days when search engines were in their infancy, these pages (and the links they contained) could be an important resource in navigating the web. Since the early 2000s, the rise of blogging and the development of user friendly web page designing software made it easier for amateur users who did not have computer programming or website designer training to create personal web pages. Some website design websites provided free ready-made blogging scripts, where all the user had to do was input their content into a template. At the same time, a personal web presence became easier with the increased popularity of social networking services, some with blogging platforms such as LiveJournal and Blogger. These websites provided an attractive and easy-to-use content management system for regular users. Most of the early personal websites were Web 1.0 style, in which a static display of text and images or photos was displayed to individuals who came to the page. About the only interaction that was possible on these early websites was signing the virtual "guestbook". With the collapse of the dot-com bubble in the late 1990s, the ISP industry consolidated, and the focus of web hosting services shifted away from the surviving ISP companies to independent Internet hosting services and to ones with other affiliations. For example, many university departments provided personal pages for professors and television broadcasters provided them for their on-air personalities. These free webpages served as a perquisite ("perk") for staff, while at the same time boosting the Web visibility of the parent organization. Web hosting companies either charge a monthly fee, or provide service that is "free" (advertising based) for personal web pages. These are priced or limited according to the total size of all files in bytes on the host's hard drive, or by bandwidth, (traffic), or by some combination of both. For those customers who continue to use their ISP for these services, national ISPs commonly continue to provide both disk space and help including ready-made drop-in scripts. With the rise of Web 2.0-style websites, both professional websites and user-created, amateur websites tended to contain interactive features, such as "clickable" links to online newspaper articles or favourite websites, the option to comment on content displayed on the website, the option to "tag" images, videos or links on the site, the option of "clicking" on an image to enlarge it or find out more information, the option of user participation for website guests to evaluate or review the pages, or even the option to create new user-generated content for others to see. A key difference between Web 1.0 personal webpages and Web 2.0 personal pages was while the former tended to be created by hackers, computer programmers and computer hobbyists, the latter were created by a much wider variety of users, including individuals whose main interests lay in hobbies or topics outside of computers (e.g., indie music fans, political activists, and social entrepreneurs). == Motivations == In a study done by Zinkhan, participants had four main reasons to create personal web pages. First, people use personal web pages as a portrayal of self, in a sense marketing themselves, since creators have the freedom to portray their own identities. Second, personal web pages are a way to interact with people who have similar interests as the creator, possible employers, or colleagues. Third, personal web pages can gain social acceptance with groups that the creator is interested in depending on the information that the creator reveals about themselves. Fourth, personal web pages can give creators a sense of connection to the world since these web pages are public and a way to introduce oneself to other people around the globe. People may maintain personal web pages to serve as a showcase for their skills in professional life, creative skills or self promotion of their business, charity or band. The use of personal web pages to display an individual's professional life has become more common in the 21st century. Mary Madden, an expert researcher on privacy and technology, did a study that found a tenth of American jobs require Personal web pages that advertise an individual online. Personal web pages have become a source of initial impression of possible employees used by employers. It can also be used to express opinions on issues ranging from news and politics to movies. Others may use their personal web page as a communication method. For example, an aspiring artist might give out business cards with their personal web page, and invite people to visit their page and see their artwork, "like" their page or sign their guestbook. A personal web page gives the owner generally more control on presence in search results and how they wish to be viewed online. It also allows more freedom in types and quantity of content than a social network profile offers, and can link various social media profiles with each other. It can be used to correct the record on something, or clear up potential confusion between you and someone with the same name. In the 2010s, some amateur writers, bands and filmmakers release digital versions of their stories, songs and short films online, with the aim of gaining an audience and becoming more well-known. While the huge number of aspiring artists posting their work online makes it unlikely for individuals and groups to become popular via the Internet, there are a small number of YouTube stars who were unknown until their online performances garnered them a huge audience. == Sites of academics == Academic professionals (especially at the college and university level), including professors and researchers, are often given online space for creating and storing personal web documents, including personal web pages, CVs and a list of their books, academic papers and conference presentations, on the websites of their employers. This goes back to the early decade of the World Wide Web and its original purpose of providing a quick and easy way for academics to share research papers and data. Researchers may have a personal website to share more information about themselves, about their academic activities and for sharing (unpublished) results of their research. This has been noted as part of the success of open-access repositories such as arXiv.

    Read more →
  • Social media as a news source

    Social media as a news source

    Social media as a news source is defined as the use of online social media platforms such as Instagram, TikTok, and Facebook rather than the use of traditional media platforms like the newspaper or live TV to obtain news. Television had just begun to turn a nation of people who once listened to media content into watchers of media content between the 1950s and the 1980s when the popularity of social media had also begun creating a nation of media content creators. Almost half of Americans use social media as a news source, according to the Pew Research Center. As social media's role in news consumption grows, questions have emerged about its impact on knowledge, the formation of echo chambers, and the effectiveness of fact-checking efforts in combating misinformation. Social media platforms allow user-generated content and sharing content within one's own virtual network. Using social media as a news source allows users to engage with news in a variety of ways including: Consuming and discovering news Sharing or reposting news Posting one's own photos, videos, or reports of news (i.e., engage in citizen or participatory journalism) Commenting on news posts Using social media as a news source has become an increasingly popular way for people of all age groups to obtain current and important information. Just like many other new forms of technology there are going to be pros and cons. There are ways that social media positively affects the world of news and journalism but it is important to acknowledge that there are also ways in which social media has a negative effect on the news. With this accessibility, people now have more ways to consume false news, biased news, and even disturbing content. In 2019, the Pew Research Center created a poll that reported Americans are wary about the ways that social media sites share news and certain content. This wariness of accuracy grew as awareness that social media sites could be exploited by bad actors who concoct false narratives and fake news. == Relationship to traditional news sources == Unlike traditional news platforms such as newspapers and news shows, social media platforms allow people without professional journalistic backgrounds to create news and cover events that news agencies might not cover. Social media users may read a set of news that differs slightly from what newspaper editors prioritize in the print press. A 2019 study found that Facebook and Twitter users are more likely to share politics, public affairs, and visual media news. Typically social media users circulate more towards posting about negative news. A study of tweets found that while optimistic-sounding and neutral-sounding tweets were equally likely to express certainty or uncertainty, the pessimistic tweets were nearly twice as likely to appear certain of an outcome than uncertain. These results could imply that posts of a more pessimistic nature that are also written with an air of certainty are more likely to be shared or otherwise permeate groups on Twitter. A similar bias towards negativity has developed on Facebook, where internal memos revealed that an algorithm built to promote "meaningful social interaction" actually incentivized publishers to promote negative and sensational news. Biases towards negativity need to be considered when the utility of new media is addressed, as the potential for human opinion to overemphasize any particular news story is greater despite general improvement. In order to compete in this rapidly changing technological environment, there has been an upheaval of traditional news sources onto online spaces. The production and circulation of newspaper prints have continued to globally decline in accordance with the increasing presence of news outlets on social media. Prominent platforms such as Twitter and Facebook have been key in engaging users through the integration of journalistic news into their newsfeeds. This feature has now become a foundational part of these apps' interfaces. Social media incentivizes both legacy news brands and individual professional journalists to share their reporting and interact with audiences on social platforms to boost engagement. However, most people who consume news on social media report that accessing news is not their main motivation for being on social media, but rather, they see and consume news incidentally. Nonetheless, informational interviews reveal that these consumers rely on being informed through social media. Some news consumers attest that a news brand's participation in social media does not improve their trust in the brand and that more in-depth reporting and more transparency about biases would improve trust instead. == Use as a news source == Globally, data from 2020 shows that over 70% of adult participants from Kenya, South Africa, Chile, Bulgaria, Greece, and Argentina utilized social media for news while those from France, the UK, the Netherlands, Germany, and Japan were reportedly less than 40 percent. According to the Pew Research Center, 20% of adults in the United States in 2018 said they get their news from social media "often," compared to 16% who said they often get news from print newspapers, 26% who often get it from the radio, 33% who often get it from news websites, and 49% who often get it from TV. The same survey found that social media was the most popular way for American adults age 18–29 to get news, the second-to-last most popular way for Americans age 20–49 to get news, and the least popular way for American adults age 50-64 and 65+ to get the news. In 2019, the Pew Research Center found that over half of Americans (54%) either got their news "sometimes" or "often" from social media, and Facebook was the most popular social media site where American adults got their news. However, at least 50% off all respondents reported that the following were either a "very big problem" or a "moderately big problem" for getting news on social media: One-sided news (83%) Inaccurate news (81%) Censorship of the news (69%) Uncivil discussions about the news (69%) Harassment of journalists (57%) News organizations or personalities being banned (53%) Violent or disturbing news images or videos (51%) In a later survey from the same year, the Pew Research Center reported that 18% of American adults reported that the most common way they get news about politics and the election was from social media. Additional source information shows that from politics and the United States presidential election in 2016, the popularity of fake news had grown to global attention. With this information, the study explains that more than 60 percent of adults receive their news from social media, the most popular being Facebook. With the increase of fake news, and the large amount of adult participation on these social media sites, it made it much harder for those who were searching for news to find a source that they could find credible. Another study found that adult participants found their own friends on Facebook to be a more reliable source of information online compared to a professional news organization. Although, when news was posted by a news organization online, they were then found more reliable compared to when they are shared by their online friends. Showing that adult participants found that the news that was only posted on Facebook and social media was much more credible to them than compared to other forms of information spreading. The study further states that these outcomes have the potential explanation that the topic of the news article played a part in the ways they were affected. This could have affected the way adult participants interacted with the different news sources, such as their online friends compared to a news organization, prominently because depending on the story, they want to have the correct information about the news from the most credible source. === By young people === Social media platforms are some of the most easily accessible forms of news and with the growing generations, the technology is only going to grow. With that, the use of social media in younger generations is also going to grow alongside it. Technology in the hands of young kids can be a concern moving into the future. Globally, there is evidence that through social media, youth have become more directly involved in protests, social campaigns and generally, in the sharing of news across multiple platforms. The number of people who use social media platforms such as Twitter, Facebook, Instagram, or Snapchat as ways to seek information has increased significantly in recent years especially for people who are part of the younger generation.TikTok is a rapidly expanding platform that young adults can use to find news content on social media. TikTok is one of the sites that young adults and teens utilize to get news about trending themes and controversial topics. The younger generation accepts without hesitation the information that thei

    Read more →
  • List of computer graphics journals

    List of computer graphics journals

    List of computer graphics journals includes notable peer-reviewed scientific and academic journals that focus on computer graphics, visualization, and related areas such as rendering, animation, image processing, and geometric modeling. == Journals == ACM Transactions on Graphics Computers & Graphics IEEE Computer Graphics and Applications IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems Graphical Models Journal of Computer Graphics Techniques Presence: Teleoperators and Virtual Environments Virtual Reality Simulation & Gaming

    Read more →
  • Social profiling

    Social profiling

    Social profiling is the process of constructing a social media user's profile using their social data. In general, profiling refers to the data science process of generating a person's profile with computerized algorithms and technology. There are various platforms for sharing this information with the proliferation of growing popular social networks, including but not limited to LinkedIn, Google+, Facebook and Twitter. == Social profile and social data == A person's social data refers to the personal data that they generate either online or offline (for more information, see social data revolution). A large amount of these data, including one's language, location and interest, is shared through social media and social network. Users join multiple social media platforms and their profiles across these platforms can be linked using different methods to obtain their interests, locations, content, and friend list. Altogether, this information can be used to construct a person's social profile. Meeting the user's satisfaction level for information collection is becoming more challenging. This is because of too much "noise" generated, which affects the process of information collection due to explosively increasing online data. Social profiling is an emerging approach to overcome the challenges faced in meeting user's demands by introducing the concept of personalized search while keeping in consideration user profiles generated using social network data. A study reviews and classifies research inferring users social profile attributes from social media data as individual and group profiling. The existing techniques along with utilized data sources, the limitations, and challenges were highlighted. The prominent approaches adopted include machine learning, ontology, and fuzzy logic. Social media data from Twitter and Facebook have been used by most of the studies to infer the social attributes of users. The literature showed that user social attributes, including age, gender, home location, wellness, emotion, opinion, relation, influence are still need to be explored. === Personalized meta-search engines === The ever-increasing online content has resulted in the lack of proficiency of centralized search engine's results. It can no longer satisfy user's demand for information. A possible solution that would increase coverage of search results would be meta-search engines, an approach that collects information from numerous centralized search engines. A new problem thus emerges, that is too much data and too much noise is generated in the collection process. Therefore, a new technique called personalized meta-search engines was developed. It makes use of a user's profile (largely social profile) to filter the search results. A user's profile can be a combination of a number of things, including but not limited to, "a user's manual selected interests, user's search history", and personal social network data. == Social media profiling == According to Samuel D. Warren II and Louis Brandeis (1890), disclosure of private information and the misuse of it can hurt people's feelings and cause considerable damage in people's lives. Social networks provide people access to intimate online interactions; therefore, information access control, information transactions, privacy issues, connections and relationships on social media have become important research fields and are subjects of concern to the public. Ricard Fogues and other co-authors state that "any privacy mechanism has at its base an access control", that dictate "how permissions are given, what elements can be private, how access rules are defined, and so on". Current access control for social media accounts tend to still be very simplistic: there is very limited diversity in the category of relationships on for social network accounts. User's relationships to others are, on most platforms, only categorized as "friend" or "non-friend" and people may leak important information to "friends" inside their social circle but not necessarily users to they consciously want to share the information to. The below section is concerned with social media profiling and what profiling information on social media accounts can achieve. === Privacy leaks === A lot of information is voluntarily shared on online social networks, such as photos and updates on life activities (new job, hobbies, etc.). People rest assured that different social network accounts on different platforms will not be linked as long as they do not grant permission to these links. However, according to Diane Gan, information gathered online enables "target subjects to be identified on other social networking sites such as Foursquare, Instagram, LinkedIn, Facebook and Google+, where more personal information was leaked". The majority of social networking platforms use the "opt out approach" for their features. If users wish to protect their privacy, it is user's own responsibility to check and change the privacy settings as a number of them are set to default option. A major social network platforms have developed geo-tag functions and are in popular usage. This is concerning because 39% of users have experienced profiling hacking; 78% burglars have used major social media networks and Google Street-view to select their victims; and an astonishing 54% of burglars attempted to break into empty houses when people posted their status updates and geo-locations. === Facebook === Formation and maintenance of social media accounts and their relationships with other accounts are associated with various social outcomes. In 2015, for many firms, customer relationship management is essential and is partially done through Facebook. Before the emergence and prevalence of social media, customer identification was primarily based upon information that a firm could directly acquire: for example, it may be through a customer's purchasing process or voluntary act of completing a survey/loyalty program. However, the rise of social media has greatly reduced the approach of building a customer's profile/model based on available data. Marketers now increasingly seek customer information through Facebook; this may include a variety of information users disclose to all users or partial users on Facebook: name, gender, date of birth, e-mail address, sexual orientation, marital status, interests, hobbies, favorite sports team(s), favorite athlete(s), or favorite music, and more importantly, Facebook connections. However, due to the privacy policy design, acquiring true information on Facebook is no trivial task. Often, Facebook users either refuse to disclose true information (sometimes using pseudonyms) or setting information to be only visible to friends, Facebook users who "LIKE" your page are also hard to identify. To do online profiling of users and cluster users, marketers and companies can and will access the following kinds of data: gender, the IP address and city of each user through the Facebook Insight page, who "LIKED" a certain user, a page list of all the pages that a person "LIKED" (transaction data), other people that a user follow (even if it exceeds the first 500, which we usually can not see) and all the publicly shared data. === Twitter === First launched on the Internet in March 2006, Twitter is a platform on which users can connect and communicate with any other user in just 280 characters. Like Facebook, Twitter is also a crucial tunnel for users to leak important information, often unconsciously, but able to be accessed and collected by others. According to Rachel Nuwer, in a sample of 10.8 million tweets by more than 5,000 users, their posted and publicly shared information are enough to reveal a user's income range. A postdoctoral researcher from the University of Pennsylvania, Daniel Preoţiuc-Pietro and his colleagues were able to categorize 90% of users into corresponding income groups. Their existing collected data, after being fed into a machine-learning model, generated reliable predictions on the characteristics of each income group. The mobile app called Streamd.in displays live tweets on Google Maps by using geo-location details attached to the tweet, and traces the user's movement in the real world. === Profiling photos on social network === The advent and universality of social media networks have boosted the role of images and visual information dissemination. Many types of visual information on social media transmit messages from the author, location information and other personal information. For example, a user may post a photo of themselves in which landmarks are visible, which can enable other users to determine where they are. In a study done by Cristina Segalin, Dong Seon Cheng and Marco Cristani, they found that profiling user posts' photos can reveal personal traits such as personality and mood. In the study, convolutional neural networks (CNNs) is introduced. It builds on the main characteristics of computational

    Read more →
  • Computer network

    Computer network

    In computer science, computer engineering, and telecommunications, a network is a group of communicating computers and peripherals known as hosts, which communicate data to other hosts via communication protocols, as facilitated by networking hardware. Within a computer network, hosts are identified by network addresses, which allow networking hardware to locate and identify hosts. Hosts may also have hostnames, memorable labels for the host nodes, which can be mapped to a network address using a hosts file or a name server such as Domain Name Service. The physical medium that supports information exchange includes wired media like copper cables, optical fibers, and wireless radio-frequency media. The arrangement of hosts and hardware within a network architecture is known as the network topology. The first computer network was created in 1940 when George Stibitz connected a terminal at Dartmouth to his Complex Number Calculator at Bell Labs in New York. Today, almost all computers are connected to a computer network, such as the global Internet or embedded networks such as those found in many modern electronic devices. Many applications have only limited functionality unless they are connected to a network. Networks support applications and services, such as access to the World Wide Web, digital video and audio, application and storage servers, printers, and email and instant messaging applications. == History == === Early origins (1940 – 1960s) === In 1940, George Stibitz of Bell Labs connected a teletype at Dartmouth to a Bell Labs computer running his Complex Number Calculator to demonstrate the use of computers at long distance. This was the first real-time, remote use of a computing machine. In the late 1950s, a network of computers was built for the U.S. military Semi-Automatic Ground Environment (SAGE) radar system using the Bell 101 modem. It was the first commercial modem for computers, released by AT&T Corporation in 1958. The modem allowed digital data to be transmitted over regular unconditioned telephone lines at a speed of 110 bits per second (bit/s). In 1959, Christopher Strachey filed a patent application for time-sharing in the United Kingdom and John McCarthy initiated the first project to implement time-sharing of user programs at MIT. Strachey passed the concept on to J. C. R. Licklider at the inaugural UNESCO Information Processing Conference in Paris that year. McCarthy was instrumental in the creation of three of the earliest time-sharing systems (the Compatible Time-Sharing System in 1961, the BBN Time-Sharing System in 1962, and the Dartmouth Time-Sharing System in 1963). In 1959, Anatoly Kitov proposed to the Central Committee of the Communist Party of the Soviet Union a detailed plan for the re-organization of the control of the Soviet armed forces and of the Soviet economy on the basis of a network of computing centers. Kitov's proposal was rejected, as later was the 1962 OGAS economy management network project. During the 1960s, Paul Baran and Donald Davies independently invented the concept of packet switching for data communication between computers over a network. Baran's work addressed adaptive routing of message blocks across a distributed network, but did not include routers with software switches, nor the idea that users, rather than the network itself, would provide the reliability. Davies' hierarchical network design included high-speed routers, communication protocols and the essence of the end-to-end principle. The NPL network, a local area network at the National Physical Laboratory (United Kingdom), pioneered the implementation of the concept in 1968-69 using 768 kbit/s links. Both Baran's and Davies' inventions were seminal contributions that influenced the development of computer networks. === ARPANET (1969 – 1974) === In 1962 and 1963, J. C. R. Licklider sent a series of memos to office colleagues discussing the concept of the "Intergalactic Computer Network", a computer network intended to allow general communications among computer users. This ultimately became the basis for the ARPANET, which began in 1969. That year, the first four nodes of the ARPANET were connected using 50 kbit/s circuits between the University of California at Los Angeles, the Stanford Research Institute, the University of California, Santa Barbara, and the University of Utah. Designed principally by Bob Kahn, the network's routing, flow control, software design and network control were developed by the IMP team working for Bolt Beranek & Newman. In the early 1970s, Leonard Kleinrock carried out mathematical work to model the performance of packet-switched networks, which underpinned the development of the ARPANET. His theoretical work on hierarchical routing in the late 1970s with student Farouk Kamoun remains critical to the operation of the Internet today. In 1973, Peter Kirstein put internetworking into practice at University College London (UCL), connecting the ARPANET to British academic networks, the first international heterogeneous computer network. That same year, Robert Metcalfe wrote a formal memo at Xerox PARC describing Ethernet, a local area networking system he created with David Boggs. It was inspired by the packet radio ALOHAnet, started by Norman Abramson and Franklin Kuo at the University of Hawaii in the late 1960s. Metcalfe and Boggs, with John Shoch and Edward Taft, also developed the PARC Universal Packet for internetworking. That year, the French CYCLADES network, directed by Louis Pouzin was the first to make the hosts responsible for the reliable delivery of data, rather than this being a centralized service of the network itself. === The internet (1974 – present) === In 1974, Vint Cerf and Bob Kahn published their seminal 1974 paper on internetworking, A Protocol for Packet Network Intercommunication. Later that year, Cerf, Yogen Dalal, and Carl Sunshine wrote the first Transmission Control Protocol (TCP) specification, RFC 675, coining the term Internet as a shorthand for internetworking. In July 1976, Metcalfe and Boggs published their paper "Ethernet: Distributed Packet Switching for Local Computer Networks" and in December 1977, together with Butler Lampson and Charles P. Thacker, they received U.S. patent 4063220A for their invention. In 1976, John Murphy of Datapoint Corporation created ARCNET, a token-passing network first used to share storage devices. In 1979, Robert Metcalfe pursued making Ethernet an open standard. In 1980, Ethernet was upgraded from the original 2.94 Mbit/s protocol to the 10 Mbit/s protocol, which was developed by Ron Crane, Bob Garner, Roy Ogus, Hal Murray, Dave Redell and Yogen Dalal. In 1986, the National Science Foundation (NSF) launched the National Science Foundation Network (NSFNET) as a general-purpose research network connecting various NSF-funded sites to each other and to regional research and education networks. In 1995, the transmission speed capacity for Ethernet increased from 10 Mbit/s to 100 Mbit/s. By 1998, Ethernet supported transmission speeds of 1 Gbit/s. Subsequently, higher speeds of up to 800 Gbit/s were added (as of 2025). The scaling of Ethernet has been a contributing factor to its continued use. In the 1980s and 1990s, as embedded systems were becoming increasingly important in factories, cars, and airplanes, network protocols were developed to allow the embedded computers to communicate. In the late 1990s and 2000s, ubiquitous computing and an Internet of Things became popular. === Commercial usage === In 1960, the commercial airline reservation system semi-automatic business research environment (SABRE) went online with two connected mainframes. In 1965, Western Electric introduced the first widely used telephone switch that implemented computer control in the switching fabric. In 1972, commercial services were first deployed on experimental public data networks in Europe. Public data networks in Europe, North America and Japan began using X.25 in the late 1970s and interconnected with X.75. This underlying infrastructure was used for expanding TCP/IP networks in the 1980s. In 1977, the first long-distance fiber network was deployed by GTE in Long Beach, California. == Hardware == === Network links === The transmission media used to link devices to form a computer network include electrical cable, optical fiber, and free space. In the OSI model, the software to handle the media is defined at layers 1 and 2 — the physical layer and the data link layer. Common examples of networking technologies include: Ethernet is a widely adopted family of networking technologies that use copper and fiber media in local area networks (LAN). The media and protocol standards that enable communication between networked devices over Ethernet are defined by IEEE 802.3. Wireless LAN standards, which use radio waves. Some standards use infrared signals as a transmission medium. Power line communication uses a building's power cabling to transmit

    Read more →
  • Netsukuku

    Netsukuku

    Netsukuku is an experimental peer-to-peer routing system, developed by the FreakNet MediaLab in 2005, created to build up a distributed network, anonymous and censorship-free, fully independent but not necessarily separated from the Internet, without the support of any server, Internet service provider and no central authority. Netsukuku is designed to handle up to 2128 nodes without any servers or central systems, with minimal CPU and memory resources. This mesh network can be built using existing network infrastructure components such as Wi-Fi. The project has been in slow development since 2005, never abandoning a beta state. It has also never been tested on large scale. == Operation == As of December 2011, the latest theoretical work on Netsukuku could be found in the author's master thesis Scalable Mesh Networks and the Address Space Balancing problem. The following description takes into account only the basic concepts of the theory. Netsukuku uses a custom routing protocol called QSPN (Quantum Shortest Path Netsukuku) that strives to be efficient and not taxing on the computational capabilities of each node. The current version of the protocol is QSPNv2. It adopts a hierarchical structure. 256 nodes are grouped inside a gnode (group node), 256 gnodes are grouped in a single ggnode (group of group nodes), 256 ggnodes are grouped in a single gggnode, and so on. This offers a set of advantages main documentation. The protocol relies on the fact that the nodes are not mobile and that the network structure does not change quickly, as several minutes may be required before a change in the network is propagated. However, a node that joins the network is immediately able to communicate using the routes of its neighbors. When a node joins the mesh network, Netsukuku automatically adapts and all other nodes come to know the fastest and most efficient routes to communicate with the newcomer. Each node has no more privileges or restrictions than the other nodes. The domain name system (DNS) is replaced by a decentralised and distributed system called ANDNA (Abnormal Netsukuku Domain Name Anarchy). The ANDNA database is included in the Netsukuku system, so each node includes such database that occupies at most 355 kilobytes of memory. Simplifying, ANDNA works as follows: to resolve a symbolic name the host applies a function Hash on its behalf. The Hash function returns an address that the host contacts asking for the resolution generated by the hash. The contacted node receives a request, searches in its ANDNA database for the address associated with the name and returns it to the applicant host. Recording works in a similar way: for example, let's suppose that the node X wants to register the address FreakNet.andna; X calculates the hash name and obtains the address 11.22.33.44 associated with node Y. The node X contacts Y asking to register 11.22.33.44 as its own. Y stores the request in its database and any request for resolution of 11.22.33.44 hash, will answer with the X's address. The protocol is a little more complex than this, as the system provides a public/private key to authenticate the hosts and prevent unauthorized changes to the ANDNA database. Furthermore, the protocol provides redundancy in the database to make the protocol resistant to failure and also provides for the migration of the database if the network topology changes. The protocol does not provide for the possibility of revoking a symbolic name; after a certain period of inactivity (currently 3 days) it is simply deleted from the database. The protocol also prevents a single host from recording an excessive number of symbolic names (at present 256 names) in order to prevent spammers from storing a high number of terms to perform cybersquatting.

    Read more →
  • List of speech recognition software

    List of speech recognition software

    Speech recognition software is available for many computing platforms, operating systems, use models, and software licenses. Here is a listing of such, grouped in various useful ways. == Acoustic models and speech corpus (compilation) == The following list presents notable speech recognition software engines with a brief synopsis of characteristics. == Macintosh == == Cross-platform web apps based on Chrome == The following list presents notable speech recognition software that operate in a Chrome browser as web apps. They make use of HTML5 Web-Speech-API. == Mobile devices and smartphones == Many mobile phone handsets, including feature phones and smartphones such as iPhones and BlackBerrys, have basic dial-by-voice features built in. Many third-party apps have implemented natural-language speech recognition support, including: == Windows == === Windows built-in speech recognition === The Windows Speech Recognition version 8.0 by Microsoft comes built into Windows Vista, Windows 7, Windows 8 and Windows 10. Speech Recognition is available only in English, French, Spanish, German, Japanese, Simplified Chinese, and Traditional Chinese and only in the corresponding version of Windows; meaning you cannot use the speech recognition engine in one language if you use a version of Windows in another language. Windows 7 Ultimate and Windows 8 Pro allow you to change the system language, and therefore change which speech engine is available. Windows Speech Recognition evolved into Cortana (software), a personal assistant included in Windows 10. === Windows 7, 8, 10, 11 third-party speech recognition === Braina – Dictate into third party software and websites, fill web forms and execute vocal commands. Dragon NaturallySpeaking from Nuance Communications – Successor to the older DragonDictate product. Focus on dictation. 64-bit Windows support since version 10.1. Tazti – Create speech command profiles to play PC games and control applications – programs. Create speech commands to open files, folders, webpages, applications. Windows 7, Windows 8 and Windows 8.1 versions. Voice Finger – software that improves the Windows speech recognition system by adding several extensions to it. The software enables controlling the mouse and the keyboard by only using the voice. It is especially useful for aiding users to overcome disabilities or to heal from computer injuries. === Microsoft Speech API === The first version of the Microsoft Speech API was released for Windows NT 3.51 and Windows 95 in 1995, it was then part of Windows up to Windows Vista. This initial version already contained Direct Speech Recognition and Direct Text To Speech APIs which applications could use to directly control engines, as well as simplified 'higher-level' Voice Command and Voice Talk APIs. Speech recognition functionality included as part of Microsoft Office and on Tablet PCs running Microsoft Windows XP Tablet PC Edition. It can also be downloaded as part of the Speech SDK 5.1 for Windows applications, but since that is aimed at developers building speech applications, the pure SDK form lacks any user interface (numerous applications were available), and thus is unsuitable for end users. == Built-in software == Microsoft Kinect includes built-in software which allows speech recognition of commands. Older generations of Nokia phones like Nokia N Series (before using Windows 7 mobile technology) used speech-recognition with family names from contact list and a few commands. Siri, originally implemented in the iPhone 4S, Apple's personal assistant for iOS, which uses technology from Nuance Communications. Cortana (software), Microsoft's personal assistant built into Windows Phone and Windows 10. == Interactive voice response == The following are interactive voice response (IVR) systems: CSLU Toolkit Genesys HTK – copyrighted by Microsoft, but allows altering software for licensee's internal use LumenVox ASR Tellme Networks; acquired by Microsoft == Unix-like x86 and x86-64 speech transcription software == Janus Recognition Toolkit (JRTk) Mozilla DeepSpeech was developing an open-source Speech-To-Text engine based on Baidu's deep speech research paper. Weesper Neon Flow – professional voice-dictation software that provides offline speech-to-text processing on macOS and Windows using local AI models. It is not open source and offers a paid subscription after a 15‑day free trial. Vocalinux – open-source speech transcription software for Linux. == Discontinued software == IBM VoiceType (formerly IBM Personal Dictation System) IBM ViaVoice – Embedded version still maintained by IBM. No longer supported for versions above Windows Vista. Untested above macOS 10.4 or on Macintoshes with an Intel chipset. Quack.com; acquired by AOL; the name has now been reused for an iPad search app. SpeechWorks from Nuance Communications. Yap Speech Cloud – Speech-to-text platform acquired by Amazon.com.

    Read more →
  • Reverse proxy

    Reverse proxy

    In computer networks, a reverse proxy or surrogate server is a proxy server that appears to any client to be an ordinary web server, but in reality merely acts as an intermediary that forwards the client's requests to one or more ordinary web servers. Reverse proxies help increase scalability, performance, resilience, and security, but they also carry a number of risks. Companies that run web servers often set up reverse proxies to facilitate the communication between an Internet user's browser and the web servers. An important advantage of doing so is that the web servers can be hidden behind a firewall on a company-internal network, and only the reverse proxy needs to be directly exposed to the Internet. Reverse proxy servers are implemented in popular open-source web servers. Dedicated reverse proxy servers are used by some of the biggest websites on the Internet. A reverse proxy is capable of tracking IP addresses of requests that are relayed through it as well as reading and/or modifying any non-encrypted traffic. However, this implies that anyone who has compromised the server could do so as well. Reverse proxies differ from forward proxies, which are used when the client is restricted to a private, internal network and asks a forward proxy to retrieve resources from the public Internet. == Uses == Large websites and content delivery networks use reverse proxies, together with other techniques, to balance the load between internal servers. Reverse proxies can keep a cache of static content, which further reduces the load on these internal servers and the internal network. It is also common for reverse proxies to add features such as compression or TLS encryption to the communication channel between the client and the reverse proxy. Reverse proxies can inspect HTTP headers, which, for example, allows them to present a single IP address to the Internet while relaying requests to different internal servers based on the URL of the HTTP request. Reverse proxies can hide the existence and characteristics of origin servers. This can make it more difficult to determine the actual location of the origin server / website and, for instance, more challenging to initiate legal action such as takedowns or block access to the website, as the IP address of the website may not be immediately apparent. Additionally, the reverse proxy may be located in a different jurisdiction with different legal requirements, further complicating the takedown process. Application firewall features can protect against common web-based attacks, like a denial-of-service attack (DoS) or distributed denial-of-service attacks (DDoS). Without a reverse proxy, removing malware or initiating takedowns (while simultaneously dealing with the attack) on one's own site, for example, can be difficult. In the case of secure websites, a web server may not perform TLS encryption itself, but instead offload the task to a reverse proxy that may be equipped with TLS acceleration hardware. (See TLS termination proxy.) A reverse proxy can distribute the load from incoming requests to several servers, with each server supporting its own application area. In the case of reverse proxying web servers, the reverse proxy may have to rewrite the URL in each incoming request in order to match the relevant internal location of the requested resource. A reverse proxy can reduce load on its origin servers by caching static content and dynamic content, known as web acceleration. Proxy caches of this sort can often satisfy a considerable number of website requests, greatly reducing the load on the origin server(s). A reverse proxy can optimize content by compressing it in order to speed up loading times. In a technique named "spoon-feeding", a dynamically generated page can be produced in its entirety and served to the reverse proxy, which can feed the page to the client as the connection allows. The program that generates the page need not remain open, thus releasing server resources during the possibly extended time the client requires to complete the transfer. Reverse proxies can operate wherever multiple web-servers must be accessible via a single public IP address. The web servers listen on different ports in the same machine, with the same local IP address or, possibly, on different machines with different local IP addresses. The reverse proxy analyzes each incoming request and delivers it to the right server within the local area network. Reverse proxies can perform A/B testing and multivariate testing without requiring application code to handle the logic of which version is served to a client. A reverse proxy can add access authentication to a web server that does not have any authentication. == Risks == When the transit traffic is encrypted and the reverse proxy needs to filter/cache/compress or otherwise modify or improve the traffic, the proxy first must decrypt and re-encrypt communications. This requires the proxy to possess the TLS certificate and its corresponding private key, extending the number of systems that can have access to non-encrypted data and making it a more valuable target for attackers. The vast majority of external data breaches happen either when hackers succeed in abusing an existing reverse proxy that was intentionally deployed by an organization, or when hackers succeed in converting an existing Internet-facing server into a reverse proxy server. Compromised or converted systems allow external attackers to specify where they want their attacks proxied to, enabling their access to internal networks and systems. Applications that were developed for the internal use of a company are not typically hardened to public standards and are not necessarily designed to withstand all hacking attempts. When an organization allows external access to such internal applications via a reverse proxy, they might unintentionally increase their own attack surface and invite hackers. If a reverse proxy is not configured to filter attacks or it does not receive daily updates to keep its attack signature database up to date, a zero-day vulnerability can pass through unfiltered, enabling attackers to gain control of the system(s) that are behind the reverse proxy server. Giving the reverse proxy of a third party access to private keys (for caching or optimizing content) places the entire triad of confidentiality, integrity and availability in the hands of the third party who operates the proxy. A reverse proxy is a single point of failure for the back-end services it fronts: an outage caused by misconfiguration, a denial-of-service attack, or a software fault can make every fronted service unreachable to outside clients, even when the back-end services themselves remain healthy. For example, a 2020 outage at Cloudflare briefly took down major sites and services that relied on its reverse-proxy edge, including Discord.

    Read more →
  • SCinet

    SCinet

    SCinet is the high-performance network built annually by volunteers in support of SC (formerly Supercomputing, the International Conference for High Performance Computing, Networking, Storage and Analysis). SCinet is the primary network for the yearly conference and is used by attendees and exhibitors to demonstrate and test high-performance computing and networking applications. == International Community == SCinet is also a hub for the international networking community. It provides a platform to share the latest research, technologies, and demonstrations for networks, network technology providers, and even software developers who are in charge of supporting HPC communities at their own institutions or organizations. == Volunteers == Nearly 200 volunteers from educational institutions, high performance computing sites, equipment vendors, research and education networks, government agencies and telecommunications carriers collaborate via technology and in-person to design, build and operate SCinet. While many of these credentialed individuals have volunteered at SCinet for years, first timers join the team each year. They include international students and participants in the National Science Foundation-funded Women in IT Networking at SC (WINS) program. The 2017 SCinet team included women and men from high performance computing institutions in the U.S. and throughout the world. == History == Originated in 1991 as an initiative within the SC conference to provide networking to attendees, SCinet has grown to become the "World's Fastest Network" during the duration of the conference. For 29 years, SCinet has provided SC attendees and the high performance computing (HPC) community with the innovative network platform necessary to internationally interconnect, transport, and display HPC research during SC. Historically, SCinet has been used as a platform to test networking technology and applications which have found their way into common use. == Research and development == In the past years, SCinet deployed conference wide networking technologies such as ATM, FDDI, HiPPi before they were deployed commercially.

    Read more →
  • Social influence bias

    Social influence bias

    The social influence bias is an asymmetric herding effect on online social media platforms which makes users overcompensate for negative ratings but amplify positive ones. Driven by the desire to be accepted within a specific group, it surrounds the idea that people alter certain behaviors to be like those of the people within a group. Therefore, it is a subgroup term for various types of cognitive biases. Some social influence bias types include the bandwagon effect, authority bias, groupthinking effect, social comparison bias, social media bias and more. Understanding these biases helps us understand the term overall. However, the composition of the term "social influence bias" requires critical examination to understand the way that it affects individuals' and groups' lives. The term "influence" has 2 different types of stigma. For one, it surrounds the idea that people show their true inner selves when "under the influence". On the other end, it also proposes the idea that people are not their own selves when "under the influence". These tend to be constructions made by people, which also tend to fit the situation based on their own perspectives. So, even in social terms, it requires both sides to be examined to understand whether we truly are affected by context, or we remain to be and behave in terms of our own selves. The term "influence" doesn't necessarily say that there lies greater strength in our inner self's desires and decisions, nor does it say that external factors have the greater power. In a similar manner, both social and non-social judgments are to be associated with anxiety, but the same can't necessarily be said in the case of social conformity. So, the gray areas within this topic beg the question, "What does social influence bias say about us, and does it affect us all in the same way?" == Social media bias == Media bias is reflected in search systems in social media. Kulshrestha and her team found through research in 2018 that the top-ranked results returned by these search engines can influence users' perceptions when they conduct searches for events or people, which is particularly reflected in political bias and polarizing topics. Fueled by confirmation bias, online echo chambers allow users to be steeped within their own ideology. Because social media is tailored to your interests and your selected friends, it is an easy outlet for political echo chambers. Social media bias is also reflected in hostile media effect. Social media has a place in disseminating news in modern society, where viewers are exposed to other people's comments while reading news articles. In their 2020 study, Gearhart and her team showed that viewers' perceptions of bias increased and perceptions of credibility decreased after seeing comments with which they held different opinions. == In research context == In observational data, how social influence affects collected judgment is challenging to fully understand. Positive social influence can accumulate and result in a rating bubble, while negative social influence is neutralized by crowd correction. This phenomenon was first described in a paper written by Lev Muchnik, Sinan Aral and Sean J. Taylor in 2014, then the question was revisited by Cicognani et al., whose experiment reinforced Munchnik's and his co-authors' results. == Relevance == Online customer reviews are trusted sources of information in various contexts such as online marketplaces, dining, accommodation, movies, or digital products. However, these online ratings are not immune to herd behavior, which means that subsequent reviews are not independent from each other. As on many such sites, preceding opinions are visible to a new reviewer, he or she can be heavily influenced by the antecedent evaluations in his or her decision about the certain product, service or online content. This form of herding behavior inspired Muchnik, Aral and Taylor to conduct their experiment on influence in social contexts. == Experimental design == Muchnik, Aral, and Taylor designed a large-scale randomized experiment to measure social influence on user reviews. The experiment was conducted on social news aggregation website like Reddit. The study lasted for 5 months, the authors randomly assigned 101 281 comments to one of the following treatment groups: up-treated (4049), down-treated (1942), or control (the proportions reflect the observed ratio of up-and down-votes. Comments which fell to the first group were given an up-vote upon the creation of the comment, the second group got a down-vote upon creation, the comments in the control group remained untouched. A vote is equivalent to a single rating (+1 or -1). As other users are unable to trace a user’s votes, they were unaware of the experiment. Due to randomization, comments in the control and the treatment group were not different in terms of expected rating. The treated comments were viewed more than 10 million times and rated 308 515 times by successive users. == Results == The up-vote treatment increased the probability of up-voting by the first viewer by 32% over the control group, while the probability of down-voting did not change compared to the control group, which means that users did not correct the random positive rating. The upward bias remained inplace for the observed 5-month period. The accumulating herding effect increased the comment’s mean rating by 25% compared to the control group comments. Positively manipulated comments did receive higher ratings at all parts of the distribution, which means that they were also more likely to collect extremely high scores. The negative manipulation created an asymmetric herd effect: although the probability of subsequent down-votes was increased by the negative treatment, the probability of up-voting also grew for these comments. The community performed a correction which neutralized the negative treatment and resulted non-different final mean ratings from the control group. The authors also compared the final mean scores of comments across the most active topic categories on the website. The observed positive herding effect was present in the "politics," "culture and society," and "business" subreddits, but was not applicable for "economics," "IT," "fun," and "general news".- == Implications == The skewed nature of online ratings makes review outcomes different to what it would be without the social influence bias. In a 2009 experiment by Hu, Zhang and Pavlou showed that the distribution of reviews of a certain product made by unconnected individuals is approximately normal, however, the rating of the same product on Amazon followed a J-Shaped distribution with twice as much five-star ratings than others. Cicognani, Figini and Magnani came to similar conclusions after their experiment conducted on a tourism services website: positive preceding ratings influenced raters' behavior more than mediocre ones. Positive crowd correction makes community-based opinions upward-biased.

    Read more →
  • IT8

    IT8

    IT8 is a set of American National Standards Institute (ANSI) standards for color communications and control specifications. Formerly governed by the IT8 Committee, IT8 activities were merged with those of the Committee for Graphics Arts Technologies Standards (CGATS Archived November 9, 2018, at the Wayback Machine) in 1994. == Standards list == The following is a list of the IT8 standards, according to the NPES Standards Blue Book Archived July 19, 2011, at the Wayback Machine: === IT8.6 - 2002 - Graphic technology - Prepress digital data exchange - Diecutting data (DDES3) === This standard establishes a data exchange format to enable transfer of numerical control information between diecutting systems and electronic prepress systems. The information will typically consist of numerical control information used in the manufacture of dies. 37 pp. === IT8.7/1 - 1993 (R2003) - Graphic technology - Color transmission target for input scanner calibration === This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set used to create the target. It is intended to address the color transparency products that are generally used for input to the preparatory process for printing and publishing. This standard defines the layout and colorimetric values of a target that can be manufactured on any positive color transparency film and that is intended for use in the calibration of a photographic film/scanner combination. 32 pp. === IT8.7/2 - 1993 (R2003) Graphic technology - Color reflection target for input scanner calibration === This standard defines an input test target that will allow any color input scanner to be calibrated with any film dye set used to create the target. It is intended to address the color photographic paper products that are generally used for input to the preparatory process for printing and publishing. It defines the layout and colorimetric values of the target that can be manufactured on any color photographic paper and is intended for use in the calibration of a photographic paper/scanner combination. 29 pp. === IT8.7/3 - 1993 (R2003) Graphic technology - Input data for characterization of 4-color process printing === The purpose of this standard is to specify an input data file, a measurement procedure and an output data format to characterize any four-color printing process. The output data (characterization) file should be transferred with any four-color (cyan, magenta, yellow and black) halftone image files to enable a color transformation to be undertaken when required. 29 pp. == Targets == Calibrating all devices involved in the process chain (original, scanner/digital camera, monitor/printer) is required for an authentic color reproduction, because their actual color spaces differ device-specifically from the reference color spaces. An IT8 calibration is done with what are called IT8 targets, which are defined by the IT8 standards. Example Special targets, implementing the IT8.7/1 (transparent target) or IT8.7/2 (reflective target) standards, are needed for calibrating scanners. These targets consists of 24 grey fields and 264 color fields in 22 columns: Column 01 to 12: HCL color model, which differ in Hue, Chroma, and Lightness Column 13 to 16: CMYK-Colors Cyan, Magenta, Yellow, and Key (black) in different steps of brightness Column 17 to 19: RGB-Colors Red, Green, and Blue in different steps of brightness Column 20 to 22: undefined, producers' choice After scanning such a target, an ICC profile gets calculated on the basis of reference values. This profile is used for all subsequent scans and assures color fidelity.

    Read more →
  • Data governance

    Data governance

    Data governance is a term used on both a macro and a micro level. The former is a political concept and forms part of international relations and Internet governance; the latter is a data management concept and forms part of corporate/organizational data governance. Data governance involves delegating authority over data and exercising that authority through decision-making processes. It plays a role in enhancing the value of data assets. == Macro level == Data governance at the macro level involves regulating cross-border data flows among countries, which is more precisely termed international data governance. This field was first formed in the early 2000s, and consists of "norms, principles and rules governing various types of data." There have been several international groups established by research organizations that aim to grant access to their data. These groups that enable an exchange of data are, as a result, exposed to domestic and international legal interpretations that ultimately decide how data is used. However, as of 2023, there are no international laws or agreements specifically focused on data protection. == Data governance (Data Management) == Data governance is the set of principles, policies, and processes that guide the effective and responsible use of data within an organization. It creates a framework for decision making, accountability, and oversight across the data lifecycle, from creation and storage to sharing and disposal. Data governance is closely linked with data management, which provides the practical methods to carry out governance objectives. These methods include data quality assurance, metadata management, master data management, security controls, and compliance monitoring. Together, governance and management aim to maximize the value of data as a strategic asset, reduce risks from misuse or inaccuracy, and ensure compliance with regulatory, ethical, and business requirements. The importance of this discipline has grown with the rise of big data, cloud computing, and artificial intelligence, where consistent standards and stewardship are essential for privacy protection, interoperability, and informed decision making. == Data governance drivers == While data governance initiatives can be driven by a desire to improve data quality, they are often driven by C-level leaders responding to external regulations. In a recent report conducted by the CIO WaterCooler community, 54% stated the key driver was efficiencies in processes; 39% - regulatory requirements; and only 7% customer service. Examples of these regulations include Sarbanes–Oxley Act, Basel I, Basel II, HIPAA, GDPR, cGMP, and a number of data privacy regulations. To achieve compliance with these regulations, business processes and controls require formal management processes to govern the data subject to these regulations. Successful programs identify drivers that are meaningful to both supervisory and executive leadership. Common themes among the external regulations center on the need to manage risk. The risks can be financial misstatement, inadvertent release of sensitive data, or poor data quality for key decisions. Methods to manage these risks vary from industry to industry. Examples of commonly referenced best practices and guidelines include COBIT, ISO/IEC 38500, and others. The proliferation of regulations and standards creates challenges for data governance professionals, particularly when multiple regulations overlap the data being managed. Organizations often launch data governance initiatives to address these challenges. == Data governance initiatives (Dimensions) == Data governance initiatives improve the quality of data by assigning a team responsible for data's accuracy, completeness, consistency, timeliness, validity, and uniqueness. This team usually consists of executive leadership, project management, line-of-business managers, and data stewards. The team usually employs a methodology for tracking and improving enterprise data, such as Six Sigma, and tools for data mapping, profiling, cleansing, and monitoring data. Data governance initiatives may be aimed at achieving a number of objectives including offering better visibility to internal and external customers (such as supply chain management), compliance with regulatory law, improving operations after rapid company growth or corporate mergers, or to aid the efficiency of enterprise knowledge workers by reducing confusion and error and increasing their scope of knowledge. Many data governance initiatives are also inspired by past attempts to fix information quality at the departmental level, which can lead to incongruent and redundant data quality processes. Most large companies have many applications and databases that can not easily share information. Therefore, knowledge workers within large organizations may not have access to the data they need to best do their jobs. When they do have access to the data, the data quality may be poor. By setting up a data governance practice or corporate data authority (individual or area responsible for determining how to proceed, in the best interest of the business, when a data issue arises), these problems can be mitigated. == Implementation == Implementation of a data governance initiative may vary in scope as well as origin. Sometimes, an executive mandate will arise to initiate an enterprise-wide effort. Sometimes the mandate will be to create a pilot project or projects, limited in scope and objectives, aimed at either resolving existing issues or demonstrating value. Sometimes, an initiative originates from lower down in the organization's hierarchy and will be deployed in a limited scope to demonstrate value to potential sponsors higher up in the organization. The initial scope of an implementation can vary greatly as well, from review of a one-off IT system to a cross-organization initiative. == Data governance tools == Leaders of successful data governance programs declared at the Data Governance Conference in Orlando, FL, in December 2006, that data governance is about 80 to 95 percent communication. That stated, it is a given that many of the objectives of a data governance program must be accomplished with appropriate tools. Many vendors are now positioning their products as data governance tools. Due to the different focus areas of various data governance initiatives, a given tool may or may not be appropriate. Additionally, many tools that are not marketed as governance tools address governance needs and demands.

    Read more →
  • Ultra (cryptography)

    Ultra (cryptography)

    Ultra was the designation adopted by British military intelligence in June 1941 for wartime signals intelligence obtained by breaking high-level encrypted enemy radio and teleprinter communications at the Government Code and Cypher School (GC&CS) at Bletchley Park. Ultra eventually became the standard designation among the western Allies for all such intelligence. The name arose because the intelligence obtained was considered more important than that designated by the highest British security classification then used (Most Secret) and so was regarded as being Ultra Secret. Several other cryptonyms had been used for such intelligence. The code name "Boniface" was used as a cover name for Ultra. In order to ensure that the successful code-breaking did not become apparent to the Germans, British intelligence created a fictional MI6 master spy, Boniface, who controlled a fictional series of agents throughout Germany. Information obtained through code-breaking was often attributed to the human intelligence from the Boniface network. The U.S. used the codename Magic for its decrypts from Japanese sources, including the "Purple" cipher. Much of the German cipher traffic was encrypted on the Enigma machine. Used properly, the German military Enigma would have been virtually unbreakable; in practice, shortcomings in operation allowed it to be broken. The term "Ultra" has often been used almost synonymously with "Enigma decrypts". However, Ultra also encompassed decrypts of the German Lorenz SZ 40/42 machines that were used by the German High Command, and the Hagelin machine. Many observers, at the time and later, regarded Ultra as immensely valuable to the Allies. Winston Churchill was reported to have told King George VI, when presenting to him Stewart Menzies (head of the Secret Intelligence Service and the person who controlled distribution of Ultra decrypts to the government): "It is thanks to the secret weapon of General Menzies, put into use on all the fronts, that we won the war!" F. W. Winterbotham quoted the western Supreme Allied Commander, Dwight D. Eisenhower, at war's end describing Ultra as having been "decisive" to Allied victory. Sir Harry Hinsley, Bletchley Park veteran and official historian of British Intelligence in World War II, made a similar assessment of Ultra, saying that while the Allies would have won the war without it, "the war would have been something like two years longer, perhaps three years longer, possibly four years longer than it was." However, Hinsley and others have emphasized the difficulties of counterfactual history in attempting such conclusions, and some historians, such as John Keegan, have said the shortening might have been as little as the three months it took the United States to deploy the atomic bomb. == Sources of intelligence == Most Ultra intelligence was derived from reading radio messages that had been encrypted with cipher machines, complemented by material from radio communications using traffic analysis and direction finding. In the early phases of the war, particularly during the eight-month Phoney War, the Germans could transmit most of their messages using land lines and so had no need to use radio. This meant that those at Bletchley Park had some time to build up experience of collecting and starting to decrypt messages on the various radio networks. German Enigma messages were the main source, with those of the German air force (the Luftwaffe) predominating, as they used radio more and their operators were particularly ill-disciplined. === German === ==== Enigma ==== "Enigma" refers to a family of electro-mechanical rotor cipher machines. These produced a polyalphabetic substitution cipher and were widely thought to be unbreakable in the 1920s, when a variant of the commercial Model D was first used by the Reichswehr. The German Army (Heer), Navy, Air Force, Nazi party, Gestapo and German diplomats used Enigma machines in several variants. Abwehr (German military intelligence) used a four-rotor machine without a plugboard and Naval Enigma used different key management from that of the army or air force, making its traffic far more difficult to cryptanalyse; each variant required different cryptanalytic treatment. The commercial versions were not as secure and Dilly Knox of GC&CS is said to have broken one before the war. German military Enigma was first broken in December 1932 by Marian Rejewski and the Polish Cipher Bureau, using a combination of brilliant mathematics, the services of a spy in the German office responsible for administering encrypted communications, and good luck. The Poles read Enigma to the outbreak of World War II and beyond, in France. At the turn of 1939, the Germans made the systems ten times more complex, which required a tenfold increase in Polish decryption equipment, which they could not meet. On 25 July 1939, the Polish Cipher Bureau handed reconstructed Enigma machines and their techniques for decrypting ciphers to the French and British. Gordon Welchman wrote, Ultra would never have got off the ground if we had not learned from the Poles, in the nick of time, the details both of the German military Enigma machine, and of the operating procedures that were in use. At Bletchley Park, some of the key people responsible for success against Enigma included mathematicians Alan Turing and Hugh Alexander and, at the British Tabulating Machine Company, chief engineer Harold Keen. After the war, interrogation of German cryptographic personnel led to the conclusion that German cryptanalysts understood that cryptanalytic attacks against Enigma were possible but were thought to require impracticable amounts of effort and investment. The Poles' early start at breaking Enigma and the continuity of their success gave the Allies an advantage when World War II began. ==== Lorenz cipher ==== In June 1941, the Germans started to introduce on-line stream cipher teleprinter systems for strategic point-to-point radio links, to which the British gave the code-name Fish. Several systems were used, principally the Lorenz SZ 40/42 (codenamed "Tunny" by the British) and Geheimfernschreiber ("Sturgeon"). These cipher systems were cryptanalysed, particularly Tunny, which the British thoroughly penetrated. It was eventually attacked using Colossus machines, which were the first digital programme-controlled electronic computers. In many respects the Tunny work was more difficult than for the Enigma, since the British codebreakers had no knowledge of the machine producing it and no head-start such as that the Poles had given them against Enigma. Although the volume of intelligence derived from this system was much smaller than that from Enigma, its importance was often far higher because it produced primarily high-level, strategic intelligence that was sent between Wehrmacht high command (Oberkommando der Wehrmacht, OKW). The eventual bulk decryption of Lorenz-enciphered messages contributed significantly, and perhaps decisively, to the defeat of Nazi Germany. Nevertheless, the Tunny story has become much less well known among the public than the Enigma one. At Bletchley Park, some of the key people responsible for success in the Tunny effort included mathematicians W. T. "Bill" Tutte and Max Newman and electrical engineer Tommy Flowers. === Italian === In June 1940, the Italians were using book codes for most of their military messages, except for the Italian Navy, which in early 1941 had started using a version of the Hagelin rotor-based cipher machine C-38. This was broken from June 1941 onwards by the Italian subsection of GC&CS at Bletchley Park. === Japanese === In the Pacific theatre, a Japanese cipher machine, called "Purple" by the Americans, was used for highest-level Japanese diplomatic traffic. It produced a polyalphabetic substitution cipher, but unlike Enigma, was not a rotor machine, being built around electrical stepping switches. It was broken by the US Army Signal Intelligence Service and disseminated as Magic. Detailed reports by the Japanese ambassador to Germany were encrypted on the Purple machine. His reports included reviews of German assessments of the military situation, reviews of strategy and intentions, reports on direct inspections by the ambassador (in one case, of Normandy beach defences), and reports of long interviews with Hitler. The Japanese are said to have obtained an Enigma machine in 1937, although it is debated whether they were given it by the Germans or bought a commercial version, which, apart from the plugboard and internal wiring, was the German Heer/Luftwaffe machine. Having developed a similar machine, the Japanese did not use the Enigma machine for their most secret communications. The chief fleet communications code system used by the Imperial Japanese Navy was called JN-25 by the Americans, and by early 1942 the US Navy had made considerable progress in decrypting Japanese naval messages. The US Army also made progress on the

    Read more →