AI Analytics And Strategic Decision Making

AI Analytics And Strategic Decision Making — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

Google Mobile Services

Google Mobile Services (GMS) is a collection of proprietary applications and application programming interfaces (APIs) services from Google that are typically pre-installed on the majority of Android devices, such as smartphones, tablets, and smart TVs. GMS is not a part of the Android Open Source Project (AOSP), which means an Android manufacturer needs to obtain a license from Google in order to legally pre-install GMS on an Android device. This license is provided by Google without any licensing fees except in the EU. == Core applications == The following are core applications that are part of Google Mobile Services: Google Search Google Chrome YouTube Google Play Google Drive Gmail Google Meet Google Maps Google Photos Google TV YouTube Music === Historically === Google+ Google Hangouts Google Wallet Google Play Magazines Google Play Music Google Play Movies & TV Google Duo == Reception, competitors, and regulators == === FairSearch === Numerous European firms filed a complaint to the European Commission stating that Google had manipulated their power and dominance within the market to push their Services to be used by phone manufacturers. The firms were joined under the name FairSearch, and the main firms included were Microsoft, Expedia, TripAdvisor, Nokia and Oracle. FairSearch's major problem with Google's practices was that they believed Google were forcing phone manufacturers to use their Mobile Services. They claimed Google managed this by asking these manufacturers to sign a contract stating that they must preinstall specific Google Mobile Services, such as Maps, Search and YouTube, in order to get the latest version of Android. Google swiftly responded stating that they "continue to work co-operatively with the European Commission". === Aptoide === The third-party Android app store Aptoide also filed an EU competition complaint against Google once again stating that they are misusing their power within the market. Aptoide alleged that Google was blocking third-party app stores from being on Google Play, as well as blocking Google Chrome from downloading any third-party apps and app stores. As of June 2014, Google had not responded to these allegations. === Abuse of Android dominance === In May 2019, Umar Javeed, Sukarma Thapar, Aaqib Javeed vs. Google LLC & Ors. the Competition Commission of India ordered an antitrust probe against Google for abusing its dominant position with Android to block market rivals. In Prima Facie opinion the commission held that mandatory pre-installation of the entire Google Mobile Services (GMS) suite, under Mobile Application Distribution Agreements (MADA), amounts to the imposition of unfair conditions on the device manufacturers. === EU antitrust ruling === On July 18, 2018, the European Commission fined Google €4.34 billion for breaching EU antitrust rules which resulted in a change of licensing policy for the GMS in the EU. A new paid licensing agreement for smartphones and tablets shipped into the EEA was created. The change is that the GMS is now decoupled from the base Android and will be offered under a separate paid licensing agreement. === Privacy policy === At the same time, Google faced problems with various European data protection agencies, most notably In the United Kingdom and France. The problem they faced was that they had a set of 60 rules merged into one, which allowed Google to "track users more closely". Google once again came out and stated that their new policies still abide by European Union laws. === Android distributions without Google Mobile Services === After surveillance and privacy concerns, several custom android distributions have been implemented, such as GrapheneOS, LineageOS, CalyxOS, iodéOS or /e/OS, and they come either without any GMS installed by default or with microG, that adds a compatibility layer.
Read more →
Commercial skipping

Commercial skipping is a feature of some digital video recorders that makes it possible to automatically skip commercials in recorded programs. This feature created controversy, with major television networks and movie studios claiming it violates copyright and should be banned. == History == After the video cassette recorder (VCR) became popular in the 1980s, the television industry began studying the impact of users fast forwarding through commercials. Advertising agencies fought the trend by making them more entertaining. For many years, video recorders manufactured for the Japanese market have been able to skip advertisements automatically, which is done by detecting when foreign language audio overdub tracks provided for many programmes go silent, as advertisements were broadcast with a single language only. The first digital video recorder (DVR) with a built-in commercial skipping feature was ReplayTV with its "4000 Series" and "5000 Series" units. In 2002, the main television networks and movie studios sued ReplayTV, claiming that skipping advertisements during replay violates copyright. Later, five owners of ReplayTV represented by Electronic Frontier Foundation and attorneys Ira Rothken and Richard Wiebe countersued, asking the federal judge to uphold consumers' rights to record TV shows and skip commercials, claiming that features like commercial skipping help parents protect their kids from excessive consumerism. ReplayTV ended up filing for bankruptcy in 2003 after fighting a copyright infringement suit over the ReplayTV's ability to skip commercials. === Commercial skipping software === In addition to the DVR devices which existed in the private market since the late 1990s, towards the mid-2000s, due to the significant advances in home computers, Home theater PCs started gaining popularity in the private market and many users began using their Home theater PCs in their living room for entertainment purposes. Following this, many DVR programs were developed, including popular programs such as Windows Media Center, which contained all of the features of the DVR devices in addition to advanced features such as HDTV and the use of Multiple TV Tuner Cards. Some independent developers began developing independent software capable of skipping the commercial segments when playing recorded videos, and permanently removing the commercial segments from recorded video files. By 2014, many DVR programs such as Windows Media Center, SageTV and MythTV had the capability to skip commercials segments in recorded TV broadcasts after installing third-party add-ons such as DVRMSToolbox, Comskip and ShowAnalyzer, which use various advanced techniques to locate the commercial segments in the video files and save their locations to text files. The text files can also be fed into programs such as MEncoder or DVRMSToolboxGUI which can delete the commercial segments from the recorded video files. A few third-party tools such as MCEBuddy automate detection and removal/marking of commercials. One of the weaknesses of commercial skippers is that, operating automatically, they may misidentify program material as a commercial. Some programs like MCEBuddy provide the ability to fine-tune commercial detection for groups of files (e.g. by channel or country) and provide tools to manually fine-tune commercial segments for individual files. In May 2012, the US Dish Network began offering a DVR with what it calls AutoHop. The device would automatically skip commercials when displaying programming that the viewer had previously recorded with the PrimeTime Anytime feature. It does not skip ads on any live programs. US broadcasters were angered at the news, and FOX embarked on legal action. Most, but not all, of Fox's claims were dismissed; ultimately an agreement was reached whereby AutoHop would only become available for Fox stations seven days after a program is transmitted; terms of the settlement were not disclosed. == The future of TV advertisements == The introduction of digital video recorders and services with skipping and fast-forward capabilities enables viewers to avoid viewing interruptive advertisements in recorded programs, either manually or automatically. While advertising separate to television shows can be skipped, advertising in TV shows themselves ("product placement") cannot be skipped. Streaming services such as Hulu show shorter advertisements with a countdown timer and tailored to the viewers interests, asking interactive questions like "Is this ad relevant to you?".
Read more →
InteLex Past Masters

InteLex Past Masters is a collection of full-text web-based scholarly editions of classic works in the humanities. InteLex Corporation was founded in 1989 by its current chief executive officer, Mark Rooks, to produce electronic versions of the works of the great philosophers, based on existing scholarly editions. The company is located in Charlottesville, Virginia. Its databases are marketed to academic institutions, with pricing based on the individual collections purchased. Content is provided in XML and searchable image format and is accessed through the InteLex Corporation website. In addition to philosophy, subject coverage includes religious studies, English literature, women's writing, social science, and history of science. InteLex databases are found in institutions in over 65 countries around the world.
Read more →
Elonis v. United States

Elonis v. United States, 575 U.S. 723 (2015), was a United States Supreme Court case concerning whether conviction of threatening another person over interstate lines (under 18 U.S.C. § 875(c)) requires proof of subjective intent to threaten or whether it is enough to show that a "reasonable person" would regard the statement as threatening. In controversy were the purported threats of violent rap lyrics written by Anthony Douglas Elonis and posted to Facebook under a pseudonym. The ACLU filed an amicus brief in support of the petitioner. It was the first time the Court has heard a case considering true threats and the limits of speech on social media. == Background == In May 2010, Elonis was in the process of divorce and made a number of public Facebook posts. Prior to his postings, he had lost his job at an amusement park. He "posted the script of a sketch" by The Whitest Kids U' Know, which originally referenced saying "I want to kill the President of the United States" and replaced the president with his wife: Elonis ended the post with this statement: "Art is about pushing limits. I'm willing to go to jail for my constitutional rights. Are you?" A week later, Elonis posted about local law enforcement and a kindergarten class, which caught the attention of the Federal Bureau of Investigation. Then, he wrote a post on Facebook about one of the agents who visited him: He concluded: == Arrest and Conviction == These actions led to Elonis's arrest on December 8, 2010. He was indicted by a grand jury on five counts of threats to his estranged ex-wife, park employees and visitors, local law enforcement, an FBI agent, and a kindergarten class that had been relayed through interstate communication. At the district court, Elonis moved to dismiss the indictment for failing to allege that he had intended to threaten anyone, claiming his Facebook post was not were not intended as a threat. He argued that, as an aspiring rap artist, his posts were intended to be a form of artistic expression to help him cope with his recent loses. According to him, he did not mean anything said in his posts in a literal sense. His motion was denied. He requested a jury instruction that "the government must prove that he intended to communicate a true threat", which was also denied. He was convicted on the last four of the five counts, and was sentenced to 44 months in prison and three years on supervised release. He appealed unsuccessfully to the Third Circuit, renewing his challenge to the jury instructions. He then appealed to the U.S. Supreme Court based on lack of any attempt to show intent to threaten and on First Amendment rights. == Decision == On June 1, 2015, the U.S. Supreme Court reversed Elonis's conviction in an 8–1 decision. Chief Justice John Roberts wrote for a seven-justice majority, Samuel Alito authored an opinion concurring in part and dissenting in part, and Clarence Thomas authored a dissenting opinion. The finding of the circuit court was reversed and the matter remanded. === Majority opinion === The majority opinion, written by Roberts, did not rule on First Amendment matters or on the question of whether recklessness was sufficient mens rea to show intent. It ruled that mens rea was required to prove the commission of a crime under §875(c). Importantly, the mens rea issue had been preserved for review, since Elonis had raised that objection at every stage of the previous proceedings. The government contended that the presence of the words "intent to extort" in §875(b) and §875(d) implied that the absence in §875(c) was constructive. The court disagreed, holding that the absence of the language in §875(c) was because the section was intended to have a broader scope than threats relating to extortion. The opinion drew on many Supreme Court cases holding that in criminal law, mens rea was required though it had not been mentioned explicitly in statute. Consequently, the Supreme Court ruled in favor of Elonis. === Alito's concurrence === Justice Samuel Alito, concurring in part and dissenting in part, opined that while agreeing that mens rea was required and specifically that showing negligence was not sufficient, the court should have ruled on the question of recklessness. He further opined that recklessness was sufficient to show a crime under that provision on the basis that going further would amount to amending the statute, rather than interpreting it. Since Elonis explicitly argued that recklessness was not sufficient, Alito said: I would therefore remand for the Third Circuit to determine if Elonis’s failure (indeed, refusal) to argue for recklessness prevents reversal of his conviction. The Third Circuit should also have the opportunity to consider whether the conviction could be upheld on harmless error grounds. Alito also addressed the First Amendment question, elided by the majority opinion. He held that "lyrics in songs that are performed for an audience or sold in recorded form are unlikely to be interpreted as a real threat to a real person. ... Statements on social media that are pointedly directed at their victims, by contrast, are much more likely to be taken seriously." === Thomas's dissent === Justice Clarence Thomas, dissenting, wrote against discarding the "general intent" standard without replacing it with a clearer standard. Thomas argued that "there is no historical practice requiring more than general intent when a statute regulates speech." Thomas cited Rosen v. United States, arguing that general intent was sufficient in this case. However, the majority opinion offers refutation in that Rosen turned on ignorance of the law: knowledge as to whether material was legally obscene, not on whether it was intended to be obscene. Thomas also supported the government's claim that the presence of "intent to extort" language in the adjacent §875(b) and did not address the majority's reasoning on that language. Thomas used precedent, notably from the states and 18th-century England based on other but similar and, arguably, influencing legislation to support his "general intent" claim. Thomas also drew a parallel with general intent in tort. While he sought to address the First Amendment issues, he never strayed far from "general intent". == Aftermath == On remand, the Third Circuit reaffirmed the conviction "concluding beyond a reasonable doubt that Elonis would have been convicted if the jury had been properly instructed" and therefore was harmless error. In 2022, Elonis was once again arrested and indicted on three counts of cyberstalking involving three people. It was discovered that between 2018 and 2021, Elonis had sent numerous threatening messages over email, text, voice mail, and social media platforms like Twitter to a former prosecutor of the Eastern District of Pennsylvania, his ex-girlfriend, and ex-wife. On August 5, after a five-day trial, Elonis was found guilty on all three counts, and on March 23, 2023, he was sentenced by U.S. District Court Judge Edward G. Smith of Easton, Pennsylvania to twelve years and seven months in prison.
Read more →
Triller (app)

Triller is an American video-sharing social networking service that was first released for iOS and Android in 2015. The service allowed users to create and share short-form videos, including videos set to, or automatically synchronized to, music using artificial intelligence technology. It initially operated as a video editing app before adding social networking features. Triller gained prominence in 2020 as a competitor to the similar Chinese-owned app TikTok, mainly in the United States and India (after the service was banned in the latter country). The app's success would allow its parent company to expand into sports broadcasting and promotion; including the distribution of pay-per-view boxing events under the Triller Fight Club banner (such as Mike Tyson vs. Roy Jones Jr. and Jake Paul vs. Ben Askren) that incorporated live music performances and appearances by various celebrities and entertainment personalities. == History == === Launch and early years === Triller was launched in 2015 by co-founders David Leiberman and Sammy Rubin. The app was originally positioned as a video editor, using artificial intelligence to automatically edit distinct clips into music videos. They later launched Triller Famous, a page within the app that featured curated selections of user videos. In 2016, the app was purchased by Carnegie Technologies and converted into a social networking service by allowing users to follow each other and share their videos publicly. In 2019, Ryan Kavanaugh's Proxima Media made a majority investment. It is headquartered in Los Angeles, California, and is currently led by CEO Mahi de Silva. === Media exposure and controversies === On June 29, 2020, Government of India banned TikTok, among other apps stating that they were "prejudicial to [the] sovereignty and integrity" of India. Triller, which had planned to enter into the Indian market by the end of 2020, saw a spike from less than 1 million users to over 30 million users in the country overnight. In July 2020, Triller sued ByteDance, the Chinese parent company of TikTok, for infringing patents relating to video editing. In response, TikTok and ByteDance filed a lawsuit against Triller, alleging the litigation initiated by Triller has "cast a cloud" over TikTok's reputation and business dealings. That Summer, U.S. president Donald Trump signed an executive order which threatened to ban TikTok from operating within the United States, citing threats to national security, unless it was sold by ByteDance. The Trump administration stated that TikTok had until November 12, 2020, to assure the administration that the app did not pose any national security threats to the U.S. Following this order and news of possible purchases of TikTok's American operations by companies such as Oracle, Triller jumped from number 198 to number one in the App Store in the U.S., while TikTok dropped down to number three. The discussions surrounding TikTok's potential ban in the United States caused popular TikTok stars, including Charli D’Amelio and her family, to join Triller. Trump joined Triller himself and posted his first video on August 15, 2020. The video received over a million views within hours. On August 12, 2020, Triller partnered with B2B music company 7digital, which will provide Triller with access to its catalogue of 80 million tracks and automatically report usage data to Sony Music, Warner Music Group, Universal Music Group and Merlin Network. The number of Triller's app installations came under scrutiny when third-party analytics firm Apptopia estimated only 52 million lifetime installations of the app by August 2020, while Triller claimed 250 million. Triller threatened to sue Apptopia for publishing the report. By October 2020, Triller claimed to serve 100 million active monthly users, but this number was quickly disputed by six former employees interviewed by Business Insider. Within a few weeks of Triller's claim, employees shared screenshots of the company's internal analytics that showed less than 2.5 million active monthly users. On October 2, 2020, Triller signed licensing deals with the rights societies PRS for Music, GEMA, STIM and IMRO, and the publishers Concord, Downtown and Peermusic. On February 5, 2021, Universal Music Group (UMG) pulled its library from Triller, citing unpaid music royalties. They alleged that Triller "shamefully withheld payments owed to our artists" and refused to negotiate future music licensing. Triller responded with the assertion that "relevant artists" were already partnered with Triller, so a deal with UMG was unnecessary. The two companies reached an expanded licensing agreement in May 2021. On March 24, 2021, Triller signed a licensing agreement with the National Music Publishers' Association. == Features == The Triller app allows users to create music videos, skits, and lip-sync videos containing background music. The app's spotlight feature is its special auto-editing tool, which uses artificial intelligence to automatically stitch separate video clips together without the user having to do it themselves. The separate video clips are created to the same background music, but users are able to shoot multiple takes with different filters or edits each time. Once the auto-editing tool stitches the individual clips together, users can rearrange and replace clips as desired. Users can also customize videos by applying filters and text. When creating a video, users can choose to make a "music video" or a "social video". A "music video" allows users to add music and trim the audio to personal preference. Unlike the music video option, a "social video" does not require the user to add music in the background. The app's auto-editing tool is only used when making music videos, as it uses the background track to help arrange and synchronize the clips. Users can also link their accounts with Apple Music or Spotify to integrate their playlists. Incomplete videos that are yet to be shared appear in a user's "Projects" folder. Once finalized, a video can be shared with other users of the app or through social media platforms such as Facebook, Instagram, Twitter (X), WhatsApp, and YouTube. Any video on Triller can also be downloaded or shared through links, text messages, or direct messaging to other users within the app. The app is divided into three video feeds, consisting of videos from creators that the user follows, the "Social" feed (which showcases trending videos and those by verified users), and the "Music" feed (which exclusively features music videos). Triller accounts can be made either public or private. When the account is public, any user can view the videos on that account. When the account is private, only approved users can view the videos on that account. Users with private accounts can change the privacy settings of individual videos on their accounts from private to public, making the selected videos viewable to anyone on the app. In accordance with online child privacy laws in the United States, children under the age of 13 must receive parental consent in order to create an account on Triller. == User characteristics and behavior == In August 2020, Triller reported that it had been downloaded over 250 million times worldwide with average rating of 4.00. Mobile analytics firm Apptopia disputed the numbers and claimed they were inflated, suggesting that the app had only been downloaded 52 million times since it first launched in 2015. Apptopia pulled the report after Triller threatened to sue the company. The app has been downloaded 23.8 million times in the U.S., with users spending an average of more than 20 minutes per day. A large number of downloads come from India, where TikTok has been banned, as well as from various European and African countries. In October 2020, Triller CEO Mike Lu stated that the app has 100 million monthly active users (MAU). In February 2021, Billboard reported that Triller had "reported higher numbers of monthly active users to the public than it reports to [music] rights holders." CEO Lu argued that "there is no legal definition" of monthly and daily active users, and that "if someone is trying to compare TikTok's MAU/DAU to ours—which means they are saying we have the same definition of MAU/DAU—there is an inherent misunderstanding about Triller's business and business model. It’s like trying to compare a fish and a bicycle." In a public statement, Lu denied that the company had inflated its user metrics. Triller has attracted celebrity users like Chance the Rapper, King Von, LIl Tecca, Lil Mosey, Justin Bieber, Marshmello, The Weeknd, Alicia Keys, Cardi B, Eminem, Post Malone and Kevin Hart. The app is also used by TikTok stars such as Charli D’Amelio, Josh Richards, Noah Beck, Griffin Johnson, and Dixie D’Amelio. Triller has offered large sums of money, company equity, and advisory roles to encourage prominent TikTok users to move to Triller, such as The Sway Boys. Sway House member J
Read more →
The Morning After (web series)

The Morning After is a Hulu original web series that premiered on January 17, 2011, and ended April 24, 2014. It was produced by Hulu and Jace Hall's HDFilms, streaming Monday through Friday. The show originally featured Brian Kimmet and Ginger Gonzaga as hosts. Later shows used a rotation of hosts including Alison Haislip, Dave Holmes, Damien Fahey, Bradley Hasemeyer, Haley Mancini, Paul Nyhart, and Rachel Perry. The series advertises itself as "a smart, daily shot of pop culture to help Hulu users stay up to date" and typically highlights notable moments from television shows and current news in an entertaining fashion. In keeping with its focus on pop culture, The Morning After will sometimes stream an episode featuring past pop culture titled "From the Archives," such as its April Fools' Day episode. == History == While not the first original series to appear exclusively on Hulu, The Morning After is the company's first self-branded production. It was preceded by If I Can Dream, a reality series co-produced with 19 Entertainment and created by Simon Fuller. Hulu originated the idea in house, based on user feedback and observations from discussion boards hosted by the website. The concept was modeled after The Big Show with Olbermann and Patrick. The company sought out a production partner and ultimately chose Jace Hall and his team at HDFilms to executive produce. Initial stream of the series was held on January 17, 2011, and featured coverage of Piers Morgan, the Golden Globes, and The Bachelor. Senior VP of Content and Distribution Andy Forssell made the announcement for the show the same day. The show aired its last episode April 24, 2014. == Format == A typical episode usually begins with a cold open shared by the varying hosts listing the highlights to be covered. The topics focus on TV and Pop Culture Highlights from the previous night, with the intention of helping Hulu users digest hours of content in a matter of moments. The show has the hosts trade humorous remarks regarding the news and each other, taking turns reviewing the night's TV and injecting their own personality. The Morning After was named as an honoree by the Webbys on April 10, 2012, in the variety section of its online video category.
Read more →
Web testing

Web testing is software testing that focuses on web applications. Complete testing of a web-based system before going live can help address issues before the system is revealed to the public. Issues may include the security of the web application, the basic functionality of the site, its accessibility to disabled and fully able users, its ability to adapt to the multitude of desktops, devices, and operating systems, as well as readiness for expected traffic and number of users and the ability to survive a massive spike in user traffic, both of which are related to load testing. == Web application performance tool == A web application performance tool (WAPT) is used to test web applications and web related interfaces. These tools are used for performance, load and stress testing of web applications, web sites, web API, web servers and other web interfaces. WAPT tends to simulate virtual users which will repeat either recorded URLs or specified URL and allows the users to specify number of times or iterations that the virtual users will have to repeat the recorded URLs. By doing so, the tool is useful to check for bottleneck and performance leakage in the website or web application being tested. A WAPT faces various challenges during testing and should be able to conduct tests for: Browser compatibility Operating System compatibility Windows application compatibility where required WAPT allows a user to specify how virtual users are involved in the testing environment.ie either increasing users or constant users or periodic users load. Increasing user load, step by step is called RAMP where virtual users are increased from 0 to hundreds. Constant user load maintains specified user load at all time. Periodic user load tends to increase and decrease the user load from time to time. == Web security testing == Web security testing tells us whether Web-based applications requirements are met when they are subjected to malicious input data. There is a web application security testing plug-in collection for Fire Fox == Web API testing == An application programming interface API exposes services to other software components, which can query the API. The API implementation is in charge of computing the service and returning the result to the component that send the query. A part of web testing focuses on testing these web API implementations. GraphQL is a specific query and API language. It is the focus of tailored testing techniques. Search-based test generation yields good results to generate test cases for GraphQL APIs.
Read more →
T.38

T.38 is an ITU recommendation for allowing transmission of fax over IP networks (FoIP) in real time. == History == The T.38 fax relay standard was devised in 1998 as a way to transport faxes across IP networks between existing Group 3 (G3) fax terminals. T.4 and related fax standards were published by the ITU in 1980, before the rise of the Internet. In the late 1990s, VoIP, or voice over IP, began to gain ground as an alternative to the conventional public switched telephone network (PSTN). However, because most VoIP systems are optimized (through their use of aggressive lossy bandwidth-saving compression) for voice rather than data calls, conventional fax machines worked poorly or not at all on them due to the network impairments such as delay, jitter, packet loss, and so on. Thus, some way of transmitting fax over IP was needed. == Overview == In practical scenarios, a T.38 fax call has at least part of the call being carried over PSTN, although this is not required by the T.38 definition, and two T.38 devices can send faxes to each other. This particular type of device is called Internet-Aware Fax device, or IAF, and it is capable of initiating or completing a fax call towards the IP network. The typical scenario where T.38 is used is – T.38 fax relay – where a T.30 fax device sends a fax over PSTN to a T.38 fax gateway which converts or encapsulates the T.30 protocol into a T.38 data stream. This is then sent either to a T.38-enabled end point such as fax machine or fax server or another T.38 gateway that converts it back to a PSTN PCM or analog signal and terminates the fax on a T.30 device. The T.38 recommendation defines the use of both TCP and UDP to transport T.38 packets. Implementations tend to use UDP, due to TCP's requirement for acknowledgement packets and resulting retransmission during packet loss, which introduces delays. When using UDP, T.38 copes with packet loss by using redundant data packets. T.38 is not a call setup protocol, thus the T.38 devices need to use standard call setup protocols to negotiate the T.38 call, e.g. H.323, SIP & MGCP. == Operation == There are two primary ways that fax transactions are conveyed across packet networks. The T.37 standard specifies how a fax image is encapsulated in e-mail and transported, ultimately, to the recipient using a store-and-forward process through intermediary entities. T.38, however, defines a protocol that supports the use of the T.30 protocol in both the sender and recipient terminals. (See diagram above.) T.38 lets one transmit a fax across an IP network in real time, just as the original G3 fax standards did for the traditional (time-division multiplexed (TDM)) network, also called the public switched telephone network or PSTN. A special protocol is needed for real-time fax over IP (Internet Protocol) since existing fax terminals only supported PSTN connections, where the information flow was generally smooth and uninterrupted, as opposed to the jittery arrival of IP packets. The trick was to come up with a protocol that makes the IP network “invisible” to the endpoint fax terminals, which would mean the user of a legacy fax terminal need not know that the fax call was traversing an IP network. The network interconnections supported by T.38 are shown above. The two fax terminals on either side of the figure communicate using the T.30 fax protocol published by the ITU in 1980. Interconnection of the PSTN with the IP packet network requires a “gateway” between the PSTN and IP networks. PSTN-IP Gateways support TDM voice on the PSTN side and VoIP and FoIP on the packet side. For voice sessions, the gateway will take in voice packets on the IP side, accumulate a few packets to ensure a smooth flow of TDM data upon their release, and then meter them out over TDM where they eventually are heard by a human or stored on a computer for later playback. The gateway employs packet-management techniques to enhance the quality of the speech in the presence of network errors by taking advantage of the natural ability of a listener to not really hear the occasional missing or repeated packet. But facsimile data are transmitted by modems, which aren't as forgiving as the human ear is for speech. Missing packets will often cause a fax session to fail at worst or create one or more image lines in error at best. So the job of T.38 is to “fool” the terminal into “thinking” that it's communicating directly with another T.30 terminal. It will also correct for network delays with so-called spoofing techniques, and missing or delayed packets with fax-aware buffer-management techniques. Spoofing refers to the logic implemented in the protocol engine of a T.38 relay that modifies the protocol commands and responses on the TDM side to keep network delays on the IP side from causing the transaction to fail. This is done, for example, by padding image lines or deliberately causing a message to be re-transmitted to render network delays transparent to the sending/receiving fax terminals. Networks that do not have packet loss or excessive delay can exhibit acceptable fax performance without T.38, provided the PCM clocks in all gateways are of very high accuracy (explained below). T.38 not only removes the effect of PCM clocks not being synchronized, but also reduces the required network bandwidth by a factor of 10, while it corrects for packet loss and delay. === Bandwidth reduction === As shown in the diagram below, a T.38 gateway is composed of two primary elements: the fax modems and the T.38 subsystem. The fax modems modulate and demodulate the PCM samples of the analog data, turning the sampled-data representation of the fax terminal's analog signal to its binary translation, and vice versa. The PSTN network samples the analog signal of a voice or modem signal (it doesn't know the difference) 8,000 times per second (SPS), and encodes them as 8-bit data bytes. This means 8000 samples-per-second times 8-bits per sample, or 64,000 bits per second (bit/s) to represent the modem (or voice) data in one direction. For both directions the modem transaction consumes 128,000 bits of network bandwidth. However, the typical modem in a fax terminal transmits the image data at 33,600 bit/s, so if the analog data are first converted to the digital content they represent, only 33,600 bits (plus network overhead of a few bytes) are needed. And since T.30 fax is a half-duplex protocol, the network is only needed for one direction at a time. Refer to RFC 3261 === PCM clock synchronization === In the diagram above, there is a sample-rate clock in the fax terminal and one in the gateway's modems that is used to trigger the sampling of the analog line 8,000 times per second. These clocks are usually quite accurate, but in some low-cost terminal adapters (a one or two-line gateway) the PCM clock can be surprisingly inaccurate. If the terminal is sending data to the gateway, and the gateway's clock is too slow, the buffers (jitter buffers) in the gateway will eventually overflow, causing the transaction to fail. Since the difference is often quite small, this problem occurs on long, detailed fax images giving the clocks more time to cause the jitter buffer in gateway to either underflow or overflow, which is just the same as missing or duplicated packets. === Packet loss === T.38 provides facilities to eliminate the effects of packet loss through data redundancy. When a packet is sent, either zero, one, two, three, or even more of the previously sent packets are repeated. (The specification does not impose a limit.) This increases the network bandwidth required (it's still much less than not using T.38) but it allows the receiving gateway to reconstruct the complete packet sequence, even with a fairly high level of packet loss. == Related standards == T.4 is the umbrella specification for fax. It specifies the standard image sizes, two forms of image-data compression (encoding), the image-data format, and references, T.30 and the various modem standards. T.6 specifies a compression scheme that reduces the time required to transmit an image by roughly 50-percent. T.30 specifies the procedures that a sending and receiving terminal use to set up a fax call, determine the image size, encoding, and transfer speed, the demarcation between pages, and the termination of the call. T.30 also references the various modem standards. V.21, V.27ter, V.29, V.17, V.34: ITU modem standards used in facsimile. The first three were ratified prior to 1980, and were specified in the original T.4 and T.30 standards. V.34 was published for fax in 1994. T.37 The ITU standard for sending a fax-image file via e-mail to the intended recipient of a fax. G.711 pass through - this is where the T.30 fax call is carried in a VoIP call encoded as audio. This is sensitive to network packet loss, jitter and clock synchronization. When using voice high-compression encoding techniques such as, but not limited to, G.729, some fax tonal signa
Read more →
Pocket (service)

Pocket, formerly known as Read It Later, was a social bookmarking service for storing, sharing and discovering web bookmarks, first released in 2007. Mozilla, the developer of Pocket, announced in May 2025 that it was discontinuing the service and would shut it down in July of that year. == History == Pocket was introduced in August 2007 as a Mozilla Firefox browser extension named Read It Later by Nathan (Nate) Weiner. Once his product was used by millions of people, he moved his office to Silicon Valley and four other people joined the Read It Later team. Weiner's intention was for the application to be like a TiVo directory for web content and to give users access to that content on any device. Read It Later obtained venture capital investments of US$2.5 million in 2011 and $5.0 million in 2012. The 2011 funding came from Foundation Capital, Baseline Ventures, Google Ventures, Founder Collective and unnamed angel investors. The company rejected an acquisition offer by Evernote after showing concerns that Evernote intended to shut down the Read It Later service and amalgamate its functionality into Evernote's main service. Initially, the Read It Later app was available in a free version and a paid version that included additional features. After the rebranding to Pocket, all paid features were made available in a free and advertisement-free app. In May 2014, a paid subscription service called Pocket Premium was introduced, adding server-side storage of articles and more powerful search tools. In June 2015, Pocket was included in Firefox, via a toolbar button and link to a user's Pocket list in the bookmark's menu. The integration was controversial, as users displayed concerns for the direct integration of a proprietary service into an open source application, and that it could not be completely disabled without editing advanced settings, unlike other third-party extensions. A Mozilla spokesperson stated that the feature was meant to leverage the service's popularity among Firefox users and clarified that all code related to the integration was open source. The spokesperson added that "[Mozilla had] gotten lots of positive feedback about the integration from users". On February 27, 2017, Pocket announced that it had been acquired by Mozilla Corporation, the commercial arm of Firefox's non-profit development group. Mozilla staff stated that Pocket would continue to operate as an independent subsidiary but that it would be leveraged as part of an ongoing "Context Graph" project. There were plans to open-source the server-side code of Pocket, though only parts of the project had been open-sourced as of 2024. On May 22, 2025, Mozilla announced that it would shut down Pocket on July 8, 2025. Exports of user data would be available until October 8, 2025, when accounts would be deleted. The email newsletter Pocket Hits was rebranded as Ten Tabs on June 12 as part of the closure, with it being changed to release only on weekdays. == Functions == The application allows the user to save an article or web page to remote servers for later reading. The article is sent to the user's Pocket list (synced to all of their devices) for offline reading. Pocket makes the article more readable by removing clutter and enabling the user to add tags and adjust text settings. == User base == The application had 17 million users and 1 billion saves, as of September 2015. Pocket was listed among Time magazine's 50 Best Android Applications for 2013. == Reception == Kent German of CNET said that "Read It Later is oh so incredibly useful for saving all the articles and news stories I find while commuting or waiting in line." Erez Zukerman of PC World said that supporting the developer is enough reason to buy what he deemed a "handy app". Bill Barol of Forbes said that although Read It Later works less well than Instapaper, "it makes my beloved Instapaper look and feel a little stodgy." In 2015, Pocket was awarded a Material Design Award for Adaptive Layout by Google for their Android application.
Read more →
Gnowit

Gnowit (pronounced "know it") is a Canadian software company that provides automated, near-real-time monitoring of legislative, regulatory, and political activity across Canada. Its platform aggregates and analyzes information from government publications, parliamentary debates, committee, and proceedings to provide searchable alerts and reports for organizations monitoring public policy and regulatory developments. The system uses natural-language processing and machine learning techniques to organize and filter large volumes of public information.; the company reports that new publication documents are captured and millions of items are added to its repository daily. == History, Founders and Leadership == Gnowit was co-founded in Ottawa in 2010 by Shahzad Khan and Mohammad Al-Azzouni; Khan serves as chief executive officer. Khan holds a PhD in Computer Science from the University of Cambridge, has more than two decades of experience in AI/ML and computational linguistics, and has authored or co-authored 37 peer-reviewed publications and five patents. Traditionally, companies performed this analysis manually; Gnowit has delivered efficiencies achieved through AI innovations. The company has participated in several Canadian startup and accelerator programs, including Carleton University's Lead To Win initiative, the University of Ottawa's Startup Garage, the Invest Ottawa incubator, and the League of Innovators' BOOST program. === Kubernetes validation (2019–2020) === As part of a Canada's Centre of Excellence in Next Generation Networks (CENGN) project, Gnowit validated a containerized version of its web-intelligence software on Kubernetes. Between 2019 and 2020, Gnowit participated in a project with Canada’s Centre of Excellence in Next Generation Networks (CENGN) to test and scale its platform using containerized infrastructure based on Kubernetes. The initiative focused on improving scalability and supporting the company’s transition from a monolithic software architecture to a cloud-native deployment model. == Products and services == Gnowit markets several modules for public-affairs, compliance, and market-intelligence teams. Legislative & Regulatory Monitoring (vAnalyst). vAnalyst is a monitoring platform that tracks legislative and regulatory activity across Canadian federal, provincial, and territorial jurisdictions. The system aggregates parliamentary debates, bills, committee proceedings, and regulatory publications and provides searchable alerts and reporting tools. The product monitors more than two million web sources to surface relevant items quickly. Parliamentary Live (vAnalyst). Monitors live video feeds from parliamentary sessions and committees with same-day transcripts, AI-generated summaries, witness summaries, and motion detection; municipal coverage is offered as an option. Gnowit can avail transcripts up to two weeks before official releases. These transcripts enable users to navigate and review lengthy parliamentary sittings and committee discussions through searchable text. Municipal Monitoring (vAnalyst). The platform also tracks council meetings, agendas, bylaws, and other municipal government publications from hundreds of Canadian municipalities. The platform aggregates these sources into a single searchable interface for reviewing local government decisions. Curation Edge (analyst service). Curation Edge is an add-on service in which expert analysts work and collaborate with clients to develop a tailored curation guide and deliver daily newsletters or briefs on legislation and media. These reports provide concise summaries, relevant links, and optional metadata, prioritizing key updates with additional context and analysis. The service is customizable, including branding and formatting for executive audiences, and is intended to reduce information overload, support decision-making, and streamline the synthesis and distribution of information. === Coverage and sources === Gnowit monitors sources span Canadian government materials across federal, provincial, and territorial jurisdictions Hansard transcripts (All Jurisdictions, including committees), order papers, committee transcripts, gazettes, bills, acts and regulations, consultations, regulatory-agency publications, and global news media as well as press releases and council-meeting materials from hundreds of municipalities. == Partnerships and support == Gnowit reports collaborations with Canadian academic and ecosystem partners, including: Algonquin College Carleton University McGill University University of Ottawa Université du Québec en Outaouais (UQO) Queen's University The company also participated in the accelerator program at Invest Ottawa and has received support from Canadian research and innovation programs, including: NRC Industrial Research Assistance Program (NRC-IRAP) Mitacs Ontario Centre of Innovation (OCI) (formerly OCE) Gnowit has also referenced membership in the Southern Ontario Smart Computing Innovation Platform (Government of Canada profile: FedDev Ontario – SOSCIP overview). == Technology == Gnowit develops technology intended to support timely decision-making by delivering updates from monitored web sources as they are published. The platform applies artificial intelligence (AI) and machine learning (ML) techniques to monitor, capture, clean, analyze, filter, and organize text, and to generate concise briefs. Its technical approach combines Boolean queries, shallow language processing techniques, and machine learning classifiers within a self-service interface. The company has described its longer-term development framework in relation to a belief–desire–intention (BDI) model of intelligent agents on the web. Gnowit and its founder are listed as inventors/assignees on patents concerning multi-document clustering, salient-content extraction, and sentiment analysis methods that are consistent with these features: US 9,600,470 – Method and system relating to re-labelling multi-document clusters (assignee: Whyz Technologies Ltd.). US 9,336,202 – Method and system relating to salient content extraction for information retrieval (assignee: Whyz Technologies Ltd.). CA 2,865,184 C – Method and system relating to re-labelling multi-document clusters. CA 2,865,186 C – Procédé et système concernant l'analyse de sentiment d'un contenu (sentiment analysis; French record). CA 2,865,187 C – Method and system relating to salient content extraction for information retrieval. == Research and community == In January 2025, Gnowit personnel contributed to regulatory NLP by co-authoring a peer-reviewed paper at the 1st Regulatory NLP Workshop (RegNLP 2025), co-located with COLING in Abu Dhabi. Titled Unifying Large Language Models and Knowledge Graphs for Efficient Regulatory Information Retrieval and Answer Generation, the work introduces PolicyInsight, a framework that joins a dynamic policy data model and knowledge graph with LLMs to monitor policy texts, detect changes, and support retrieval and answer generation; the author list includes Shahzad Khan (CEO, Gnowit Inc.). (ACL Anthology, aclweb.org). Similar information-retrieval technologies are widely used for competitive intelligence, policy monitoring, and media analysis. == White paper == Gnowit has published a practical guide, Automated Government Information Monitoring, which outlines how GR and regulatory teams can design a monitoring and briefing workflow and describes Gnowit's automation features and export options (PDF, email, dashboards, CSV/JSON/XML/API).
Read more →
Locative media

Locative media or location-based media (LBM) is a virtual medium of communication functionally bound to a location. The physical implementation of locative media, however, is not bound to the same location to which the content refers. Location-based media delivers multimedia and other content directly to the user of a mobile device dependent upon their location. Location information determined by means such as mobile phone tracking and other emerging real-time locating system technologies like Wi-Fi or RFID can be used to customize media content presented on the device. Locative media are digital media applied to real places and thus triggering real social interactions. While mobile technologies such as the Global Positioning System (GPS), laptop computers and mobile phones enable locative media, they are not the goal for the development of projects in this field. == Description == Media content is managed and organized externally of the device on a standard desktop, laptop, server, or cloud computing system. The device then downloads this formatted content with GPS or other RTLS coordinate-based triggers applied to each media sequence. As the location-aware device enters the selected area, centralized services trigger the assigned media, designed to be of optimal relevance to the user and their surroundings. Use of locative technologies "includes a range of experimental uses of geo-technologies including location-based games, artistic critique of surveillance technologies, experiential mapping, and spatial annotation." Location based media allows for the enhancement of any given environment offering explanation, analysis and detailed commentary on what the user is looking at through a combination of video, audio, images and text. The location-aware device can deliver interpretation of cities, parklands, heritage sites, sporting events or any other environment where location based media is required. The content production and pre-production are integral to the overall experience that is created and must have been performed with ultimate consideration of the location and the users position within that location. The media offers a depth to the environment beyond that which is immediately apparent, allowing revelations about background, history and current topical feeds. == Locative, ubiquitous and pervasive computing == The term 'locative media' was coined by Karlis Kalnins. Locative media is closely related to augmented reality (reality overlaid with virtual reality) and pervasive computing (computers everywhere, as in ubiquitous computing). Whereas augmented reality strives for technical solutions, and pervasive computing is interested in embedded computers, locative media concentrates on social interaction with a place and with technology. Many locative media projects have a social, critical or personal (memory) background. While strictly spoken, any kind of link to additional information set up in space (together with the information that a specific place supplies) would make up location-dependent media, the term locative media is strictly bound to technical projects. Locative media works on locations and yet many of its applications are still location-independent in a technical sense. As in the case of digital media, where the medium itself is not digital but the content is digital, in locative media the medium itself might not be location-oriented, whereas the content is location-oriented. Japanese mobile phone culture embraces location-dependent information and context-awareness. It is projected that in the near future locative media will develop to a significant factor in everyday life. == Enabling technologies == Locative media projects use technology such as Global Positioning System (GPS), laptop computers, the mobile phone, Geographic Information System (GIS), and web map services such as Mapbox, OpenStreetMap, and Google Maps among others. Whereas GPS allows for the accurate detection of a specific location, mobile computers allow interactive media to be linked to this place. The GIS supplies arbitrary information about the geological, strategic or economic situation of a location. Web maps like Google Maps give a visual representation of a specific place. Another important new technology that links digital data to a specific place is radio-frequency identification (RFID), a successor to barcodes like Semacode. Research that contributes to the field of locative media happens in fields such as pervasive computing, context awareness and mobile technology. The technological background of locative media is sometimes referred to as "location-aware computing". == Creative representation == Place is often seen as central to creativity; in fact, "for some—regional artists, citizen journalists and environmental organizations for example—a sense of place is a particularly important aspect of representation, and the starting point of conversations." Locative media can propel such conversations in its function as a "poetic form of data visualization," as its output often traces how people move in, and by proxy, make sense of, urban environments. Given the dynamism and hybridity of cities and the networks which comprise them, locative media extends the internet landscape to physical environments where people forge social relations and actions which can be "mobile, plural, differentiated, adventurous, innovative, but also estranged, alienated, impersonalized." Moreover, in using locative technologies, users can expand how they communicate and assert themselves in their environment and, in doing so, explore this continuum of urban interactions. Furthermore, users can assume a more active role in constructing the environments they are situated in accordingly. In turn, artists have been intrigued with locative media as a means of "user-led mapping, social networking and artistic interventions in which the fabric of the urban environment and the contours of the earth become a 'canvas.'" Such projects demystify how resident behaviors in a given city contribute to the culture and sense of personality that cities are often perceived to take on. Design scholars Anne Galloway and Matthew Ward state that "various online lists of pervasive computing and locative media projects draw out the breadth of current classification schema: everything from mobile games, place-based storytelling, spatial annotation and networked performances to device-specific applications." A prominent use of locative media is in locative art. A sub-category of interactive art or new media art, locative art explores the relationships between the real world and the virtual or between people, places or objects in the real world. == Examples == Notable locative media projects include Bio Mapping by Christian Nold in 2004, locative art projects such as the SpacePlace ZKM/ZKMax bluecasting and participatory urban media access in Munich in 2005 and Britglyph by Alfie Dennen in 2009, and location-based games such as AR Quake by the Wearable Computer Lab at the University of South Australia and Can You See Me Now? in 2001 by Blast Theory in collaboration with the Mixed Reality Lab at the University of Nottingham. In 2005, the Silicon Valley–based collaborators of C5 first exhibited the C5 Landscape Initiative, a suite of four GPS inspired projects that investigate perception of landscape in light of locative media. In William Gibson's 2007 novel Spook Country, locative art is one of the main themes and set pieces in the story. Narrative projects which engage with locative media are sometimes referred to as Location-Aware Fiction, as explored in "Data and Narrative: Location Aware Fiction" a 2003 essay by Kate Armstrong. This location-aware fiction is also known as locative literature, where locative stories and poems can be experienced via digital portals, apps, QR codes and e-books, as well as via analogue forms such as labelling tape, Scrabble tiles, fridge magnets or Post-It notes, and these are forms often used by the writer and artist Matt Blackwood. The Transborder Immigrant Tool by the Electronic Disturbance Theater is a locative media project aimed at providing life saving directions to water for people trying to cross the US / Mexico border. The project attracted global media attention in 2009 and 2010. Articles included a Los Angeles Times cover story focusing on Ricardo Dominguez and an AP story interviewing Micha Cárdenas and Brett Stalbaum. The articles focused on concerns over the legality of the project and the ensuing investigations of the group, which are still underway. The Transborder Immigrant Tool has recently been included in a number of major exhibitions including Here, Not There at the Museum of Contemporary Art San Diego and the 2010 California Biennial at the Orange County Museum of Art. Invisible Threads by Stephanie Rothenberg and Jeff Crouse is a locative media project aimed at creating embodied awareness of sweatshops and just-in-time production t
Read more →
Electronics

Electronics is a scientific and engineering discipline that studies and applies the principles of physics to design, create, and operate devices that manipulate electrons and other electrically charged particles. It is a subfield of physics and electrical engineering which uses active devices such as transistors, diodes, and integrated circuits to control and amplify the flow of electric current and to convert it from one form to another, such as from alternating current (AC) to direct current (DC) or from analog signals to digital signals. Electronic devices have significantly influenced the development of many aspects of modern society, such as telecommunications, entertainment, education, health care, industry, and security. The main driving force behind the advancement of electronics is the semiconductor industry, which continually produces ever-more sophisticated electronic devices and circuits in response to global demand. The semiconductor industry is one of the global economy's largest and most profitable industries, with annual revenues exceeding $481 billion in 2018. The electronics industry also encompasses other branches that rely on electronic devices and systems, such as e-commerce, which generated over $29 trillion in online sales in 2017. == History and development == Karl Ferdinand Braun's development of the crystal detector, the first semiconductor device, in 1874 and the identification of the electron in 1897 by Sir Joseph John Thomson, along with the subsequent invention of the vacuum tube which could amplify and rectify small electrical signals, inaugurated the field of electronics and the electron age. Practical applications started with the invention of the diode by Ambrose Fleming and the triode by Lee De Forest in the early 1900s, which made the detection of small electrical voltages, such as radio signals from a radio antenna, practicable. Vacuum tubes (thermionic valves) were the first active electronic components which controlled current flow by influencing the flow of individual electrons, and enabled the construction of equipment that used current amplification and rectification to give us radio, television, radar, long-distance telephony and much more. The early growth of electronics was rapid, and by the 1920s, commercial radio broadcasting and telecommunications were becoming widespread and electronic amplifiers were being used in such diverse applications as long-distance telephony and the music recording industry. The next big technological step took several decades to appear, when the first working point-contact transistor was invented by John Bardeen and Walter Houser Brattain at Bell Labs in 1947. However, vacuum tubes continued to play a leading role in the field of microwave and high power transmission as well as television receivers until the middle of the 1980s. Since then, solid-state devices have all but completely taken over. Vacuum tubes are still used in some specialist applications such as high power RF amplifiers, cathode-ray tubes, specialist audio equipment, guitar amplifiers and some microwave devices. In April 1955, the IBM 608 was the first IBM product to use transistor circuits without any vacuum tubes and is believed to be the first all-transistorized calculator to be manufactured for the commercial market. The 608 contained more than 3,000 germanium transistors. Thomas J. Watson Jr. ordered all future IBM products to use transistors in their design. From that time on, transistors were almost exclusively used for computer logic circuits and peripheral devices. However, early junction transistors were relatively bulky devices that were difficult to manufacture on a mass-production basis, which limited them to a number of specialised applications. The MOSFET was invented at Bell Labs between 1955 and 1960. It was the first truly compact transistor that could be miniaturised and mass-produced for a wide range of uses. Its advantages include high scalability, affordability, low power consumption, and high density. It revolutionized the electronics industry, becoming the most widely used electronic device in the world. The MOSFET is the basic element in most modern electronic equipment. As the complexity of circuits grew, problems arose. One problem was the size of the circuit. A complex circuit like a computer was dependent on speed. If the components were large, the wires interconnecting them must be long. The electric signals took time to go through the circuit, thus slowing the computer. The invention of the integrated circuit by Jack Kilby and Robert Noyce solved this problem by making all the components and the chip out of the same block (monolith) of semiconductor material. The circuits could be made smaller, and the manufacturing process could be automated. This led to the idea of integrating all components on a single-crystal silicon wafer, which led to small-scale integration (SSI) in the early 1960s, and then medium-scale integration (MSI) in the late 1960s, followed by VLSI. In 2008, billion-transistor processors became commercially available. == Subfields == == Devices and components == An electronic component is any component, either active or passive, in an electronic system or electronic device. Components are connected together, usually by being soldered to a printed circuit board (PCB), to create an electronic circuit with a particular function. Components may be packaged singly or in more complex groups as integrated circuits. Passive electronic components are capacitors, inductors, resistors, whilst active components are such as semiconductor devices; transistors and thyristors, which control current flow at electron level. == Types of circuits == Electronic circuit functions can be divided into two function groups: analog and digital. A particular device may consist of circuitry that has either or a mix of the two types. Analog circuits are becoming less common, as many of their functions are being digitized. === Analog circuits === Analog circuits use a continuous range of voltage or current for signal processing, as opposed to the discrete levels used in digital circuits. Analog circuits were common throughout electronic devices in the early years, in devices such as radio receivers and transmitters. Analog electronic computers were valuable for solving problems with continuous variables until digital processing advanced. As semiconductor technology developed, many of the functions of analog circuits were taken over by digital circuits, and modern circuits that are entirely analog are less common; their functions being replaced by hybrid approach which, for instance, uses analog circuits at the front end of a device receiving an analog signal, and then use digital processing using microprocessor techniques thereafter. Sometimes it may be difficult to classify some circuits that have elements of both linear and non-linear operation. An example is the voltage comparator, which receives a continuous range of voltage but only outputs one of two levels, as in a digital circuit. Similarly, an overdriven transistor amplifier can take on the characteristics of a controlled switch, having essentially two levels of output. Analog circuits are still widely used for signal amplification, such as in the entertainment industry, and conditioning signals from analog sensors, such as in industrial measurement and control. === Digital circuits === Digital circuits are electric circuits based on discrete voltage levels. Digital circuits use Boolean algebra and are the basis of all digital computers and microprocessor devices. They range from simple logic gates to large integrated circuits, employing millions of such gates. Digital circuits use a binary system with two voltage levels labelled 0 and 1 to indicate logical status. Often logic 0 will be a lower voltage and referred to as Low while logic 1 is referred to as High. However, some systems use the reverse definition (0 is High) or are current based. Quite often, the logic designer may reverse these definitions from one circuit to the next as they see fit to facilitate their design. The definition of the levels as 0 or 1 is arbitrary. Ternary (with three states) logic has been studied, and some prototype computers made, but have not gained any significant practical acceptance. Universally, computers and digital signal processors are constructed with digital logic circuits using transistors such as MOSFETs in the electronic logic gates to generate binary states. Logic gates Adders Flip-flops Counters Registers Multiplexers Schmitt triggers Highly integrated devices: Memory chip Microprocessors Microcontrollers Application-specific integrated circuit (ASIC) Digital signal processor (DSP) Field-programmable gate array (FPGA) Field-programmable analog array (FPAA) System on chip (SOC) == Design == Electronic systems design deals with the multi-disciplinary design issues of complex electronic devices and systems, such as mob
Read more →
MyChild App

MyChild App is an Android app that helps parents screen developmental disorders in their children between the age of 1 and 24 months. The app contains information for parents about the different stages of a child's development. == Background == Launched in 2015 on Google PlayStore, the app is a consumer product of the parent company, Time Ahead, Inc. Its office is based in Bhopal, Madhya Pradesh, India. As of August 2016, the app had been downloaded by 11,000+ users in 140+ countries and is a part of fbstart case study. == Funding == In 2015, MyChild App raised a seed round of $100k led by 500 Startups, followed by angel investors Samir Bangara, Anisha Mittal, Pallav Nadhani, Deobrat Singh, Lalit Mangal, Arihant Patni, Amit Gupta, Dr. Ritesh Malik, Saurab Paruthi, and Singapore Angel Network.
Read more →
COVFEFE Act

The Communications Over Various Feeds Electronically for Engagement Act (COVFEFE Act), House Bill H.R. 2884, was introduced in the United States House of Representatives on June 12, 2017, during the 115th United States Congress. The bill was intended to amend the Presidential Records Act to preserve Twitter posts and other social media interactions of the President of the United States and require the National Archives to store such items. H.R. 2884 was assigned to the House Oversight and Reform Committee for consideration. While in committee, there were no roll call votes related to the bill. The bill died in committee. U.S. Representative Mike Quigley, Democrat of Illinois, introduced the legislation due to Donald Trump's routine use of Twitter, stating "In order to maintain public trust in government, elected officials must answer for what they do and say; this includes 140-character tweets. If the president is going to take to social media to make sudden public policy proclamations, we must ensure that these statements are documented and preserved for future reference". If enacted, the bill "would bar the prolifically tweeting president from deleting his posts, as he has sometimes done". The COVFEFE Act would have also treated a president's personal social media accounts (e.g., Trump's "@realDonaldTrump" Twitter account) the same as official social media accounts (e.g., the "@POTUS" Twitter account). == Background == The bill title refers to "covfefe", a word in a May 31, 2017 tweet that Trump sent at 12:06 AM EDT, reading "Despite the constant negative press covfefe". This incomplete tweet was liked and retweeted hundreds of thousands of times, making it one of the most popular tweets of 2017, as people speculated on its meaning. The tweet was deleted at 5:48 AM EDT. At 6:09 AM EDT, Trump's account tweeted "Who can figure out the true meaning of 'covfefe' ??? Enjoy!" During the May 31 White House press briefing, Hunter Walker of Yahoo! News asked White House press secretary Sean Spicer about the tweet and if there was any concern about the president sending out incoherent tweets that stay up for hours. Spicer responded, "I think the president and a small group of people know exactly what he meant" and offered no other explanation. This unexpected response spawned additional media attention and criticism for its cryptic meaning, with commentators unsure whether or not Spicer was joking. Callum Borchers of The Washington Post's The Fix noted that the Trump administration deliberately responded in a way that encouraged the media and the public to focus on covfefe instead of other controversies like the Russia investigation, resignation of White House communications director Michael Dubke, or U.S.-Germany relations. == Legal significance of Trump's tweeting == Trump's tweets have been legally significant in the past. White House Press Secretary Sean Spicer stated that Trump's tweets are "considered official statements by the President of the United States". Some of his tweets have contradicted his agenda by undercutting or contradicting statements of public officials as well as the arguments of U.S. Department of Justice attorneys seeking to defend Trump's decisions in court. A federal appellate court cited one of Trump's tweets in upholding a lower court's order blocking Trump's Executive Order 13780 from going into effect in 2017. Courts have been clear that Twitter statements can be used as evidence of intent. Before Trump's "@realDonaldTrump" Twitter account was suspended, he blocked a number of users, preventing them from viewing his tweets or posting public replies. A group associated with Columbia University filed a lawsuit on behalf of blocked users, called Knight First Amendment Institute v. Trump. Plaintiffs successfully argued that @realDonaldTrump reply threads constituted a "designated public forum" akin to a public meeting, and therefore blocking users based on their political viewpoints violated their constitutional right to freedom of speech. The Second Circuit upheld this ruling on July 9, 2019. Regardless of the failure of the bill, Trump's tweets have been archived in accordance with the Presidential and Federal Records Act Amendments of 2014.
Read more →
Macroelectronics

Macroelectronics are flexible electronics that cover a large area. The most visible example of macroelectronics is flat-panel displays. Other emerging applications include rollable display, printable thin film solar cell and electronic skin. Flat-panel displays fabricated on glass substrates are fragile so fabricating directly on flexible substrates, such as polymers is being explored. Displays made on thin polymer substrates can be more rugged than glass. In September 2005, Philips Polymer Vision revealed the world's first prototype of a rollable electronic reader, which can unfold to a 5-inch display and roll back into a pocket-size (100×60×20 mm) device. Thin-film devices on flexible polymer substrates can lend themselves to low-cost fabrication processes (i.e., roll-to-roll printing), resulting in lightweight, rugged and flexible macroelectronic products.
Read more →