AI Detector Check

AI Detector Check — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

  • Linux Trace Toolkit

    Linux Trace Toolkit

    The Linux Trace Toolkit (LTT) is a set of tools that is designed to log program execution details from a patched Linux kernel and then perform various analyses on them, using console-based and graphical tools. LTT has been mostly superseded by its successor LTTng (Linux Trace Toolkit Next Generation). LTT allows the user to see in-depth information about the processes that were running during the trace period, including when context switches occurred, how long the processes were blocked for, and how much time the processes spent executing vs. how much time the processes were blocked. The data is logged to a text file and various console-based and graphical (GTK+) tools are provided for interpreting that data. In order to do data collection, LTT requires a patched Linux kernel. The authors of LTT claim that the performance hit for a patched kernel compared to a regular kernel is minimal; Their testing has reportedly shown that this is less than 2.5% on a "normal use" system (measured using batches of kernel makes) and less than 5% on a file I/O intensive system (measured using batches of tar). == Usage == === Collecting trace data === Data collection is Started by: trace 15 foo This command will cause the LTT tracedaemon to do a trace that lasts for 15 seconds, writing trace data to foo.trace and process information from the /proc filesystem to foo.proc. The trace command is actually a script which runs the program tracedaemon with some common options. It is possible to run tracedaemon directly and in that case, the user can use a number of command-line options to control the data which is collected. For the complete list of options supported by tracedaemon, see the online manual page for tracedaemon. === Viewing the results === Viewing the results of a trace can be accomplished with: traceview foo This command will launch a graphical (GTK+) traceview tool that will read from foo.trace and foo.proc. This tool can show information in various interesting ways, including Event Graph, Process Analysis, and Raw Trace. The Event Graph is perhaps the most interesting view, showing the exact timing of events like page faults, interrupts, and context switches, in a simple graphical way. The traceview command is a wrapper for a program called tracevisualizer. For the complete list of options supported by tracevisualizer, see the online manual page for tracevisualizer.

    Read more →
  • Mobile Passport Control

    Mobile Passport Control

    Mobile Passport Control (MPC) is a mobile app that enables eligible travelers entering the United States to submit their passport information and customs declaration form to Customs and Border Protection via smartphone or tablet and go through the inspections process using an expedited lane. It is available to "U.S. citizens, U.S. lawful permanent residents, Canadian B1/B2 citizen visitors and returning Visa Waiver Program travelers with approved ESTA". The app is available on iOS and Android devices and is operational at 34 US airports, 14 international airports offering preclearance facilities, and 4 seaports. The use of Mobile Passport Control operations have increased threefold from 2016 to 2017. == History == Mobile Passport Control operations were launched in Atlanta at the Hartsfield-Jackson International Airport in 2016 and is now available at 34 U.S. airports, 14 international airports that offer preclearance and 4 U.S. cruise ports. The Mobile Passport app is authorized by CBP and sponsored by the Airports Council International-North America, Boeing, and the Port of Everglades. Airside Mobile, Inc. secured a Series A funding of $6 million in the fall of 2017. == How it works == During the customs process at the Federal Inspection Service (FIS) area of a U.S. airport, travelers arriving from international locations typically wait in long lines before presenting passports and paperwork and verbally answering questions made by CBP officials. Eligible travelers who have downloaded the Mobile Passport app can expedite this process by submitting information regarding their passport and trip details, and a newly-taken selfie, via their mobile device to CBP officials, then access an expedited line. Mobile Passport Control users will be required to show their physical passport(s) and briefly talk to a CBP officer. == Locations == === US airports === Atlanta (ATL) Baltimore (BWI) Boston (BOS) Charlotte (CLT) Chicago (ORD) Dallas/Ft Worth (DFW) Denver (DEN) Detroit (DTW) as of 7/2024 Ft. Lauderdale (FLL) Honolulu (HNL) Houston (HOU and IAH) Kansas City (MCI) Las Vegas (LAS) Los Angeles (LAX) Miami (MIA) Minneapolis (MSP) New York (JFK) Newark (EWR) Oakland (OAK) Orlando (MCO) Palm Beach (PBI) Philadelphia (PHL) Phoenix (PHX) Pittsburgh (PIT) Portland (PDX) Sacramento (SMF) San Diego (SAN) San Francisco (SFO) San Jose (SJC) San Juan (SJU) Seattle (SEA) Tampa (TPA) Washington Dulles (IAD) === International Preclearance locations === Abu Dhabi (AUH) Aruba (AUA) Bermuda (BDA) Calgary (YYC) Dublin (DUB) Edmonton (YEG) Halifax (YHZ) Montreal (YUL) Nassau (NAS) Ottawa (YOW) Shannon (SNN) Toronto (YYZ) Vancouver (YVR) Winnipeg (YWG) Sepinggan (BPN) === Seaports === Fort Lauderdale (PEV) Miami (MSE) San Juan (PUE) West Palm Beach (WPB)

    Read more →
  • Database

    Database

    In computing, a database is an organized collection of data or a type of data store based on the use of a database management system (DBMS), the software that interacts with end users, applications, and the database itself to capture and analyze the data. The DBMS additionally encompasses the core facilities provided to administer the database. The sum total of the database, the DBMS and the associated applications can be referred to as a database system. Often the term "database" is also used loosely to refer to any of the DBMS, the database system or an application associated with the database. Before digital storage and retrieval of data became widespread, index cards were used for data storage in a wide range of applications and environments: in the home to record and store recipes, shopping lists, contact information and other organizational data; in business to record presentation notes, project research and notes, and contact information; in schools as flash cards or other visual aids; and in academic research to hold data such as bibliographical citations or notes in a card file. Professional book indexers used index cards in the creation of book indexes until they were replaced by indexing software in the 1980s and 1990s. Small databases can be stored on a file system, while large databases are hosted on computer clusters or cloud storage. The design of databases spans formal techniques and practical considerations, including data modeling, efficient data representation and storage, query languages, security and privacy of sensitive data, and distributed computing issues, including supporting concurrent access and fault tolerance. Computer scientists may classify database management systems according to the database models that they support. Relational databases became dominant in the 1980s. These model data as rows and columns in a series of tables, and the vast majority use SQL for writing and querying data. In the 2000s, non-relational databases became popular, collectively referred to as NoSQL, because they use different query languages. == Terminology and overview == Formally, a "database" refers to a set of related data accessed through the use of a "database management system" (DBMS), which is an integrated set of computer software that allows users to interact with one or more databases and provides access to all of the data contained in the database (although restrictions may exist that limit access to particular data). The DBMS provides various functions that allow entry, storage and retrieval of large quantities of information and provides ways to manage how that information is organized. Because of the close relationship between them, the term "database" is often used casually to refer to both a database and the DBMS used to manipulate it. Outside the world of professional information technology, the term database is often used to refer to any collection of related data (such as a spreadsheet or a card index) as size and usage requirements typically necessitate use of a database management system. Existing DBMSs provide various functions that allow management of a database and its data which can be classified into four main functional groups: Data definition – Creation, modification and removal of definitions that detail how the data is to be organized. Update – Insertion, modification, and deletion of the data itself. Retrieval – Selecting data according to specified criteria (e.g., a query, a position in a hierarchy, or a position in relation to other data) and providing that data either directly to the user, or making it available for further processing by the database itself or by other applications. The retrieved data may be made available in a more or less direct form without modification, as it is stored in the database, or in a new form obtained by altering it or combining it with existing data from the database. Administration – Registering and monitoring users, enforcing data security, monitoring performance, maintaining data integrity, dealing with concurrency control, and recovering information that has been corrupted by some event such as an unexpected system failure. Both a database and its DBMS conform to the principles of a particular database model. "Database system" refers collectively to the database model, database management system, and database. Physically, database servers are dedicated computers that hold the actual databases and run only the DBMS and related software. Database servers are usually multiprocessor computers, with generous memory and RAID disk arrays used for stable storage. Hardware database accelerators, connected to one or more servers via a high-speed channel, are also used in large-volume transaction processing environments. DBMSs are found at the heart of most database applications. DBMSs may be built around a custom multitasking kernel with built-in networking support, but modern DBMSs typically rely on a standard operating system to provide these functions. Since DBMSs comprise a significant market, computer and storage vendors often take into account DBMS requirements in their own development plans. Databases and DBMSs can be categorized according to the database model(s) that they support (such as relational or XML), the type(s) of computer they run on (from a server cluster to a mobile phone), the query language(s) used to access the database (such as SQL or XQuery), and their internal engineering, which affects performance, scalability, resilience, and security. == History == The sizes, capabilities, and performance of databases and their respective DBMSs have grown in orders of magnitude. These performance increases were enabled by the technology progress in the areas of processors, computer memory, computer storage, and computer networks. The concept of a database was made possible by the emergence of direct access storage media such as magnetic disks, which became widely available in the mid-1960s; earlier systems relied on sequential storage of data on magnetic tape. The subsequent development of database technology can be divided into three eras based on data model or structure: navigational, SQL/relational, and post-relational. The two main early navigational data models were the hierarchical model and the CODASYL model (network model). These were characterized by the use of pointers (often physical disk addresses) to follow relationships from one record to another. The relational model, first proposed in 1970 by Edgar F. Codd, departed from this tradition by insisting that applications should search for data by content, rather than by following links. The relational model employs sets of ledger-style tables, each used for a different type of entity. Only in the mid-1980s did computing hardware become powerful enough to allow the wide deployment of relational systems (DBMSs plus applications). By the early 1990s, however, relational systems dominated in all large-scale data processing applications, and as of 2018 they remain dominant: IBM Db2, Oracle, MySQL, and Microsoft SQL Server are the most searched DBMS. The dominant database language, standardized SQL for the relational model, has influenced database languages for other data models. Object databases were developed in the 1980s to overcome the inconvenience of object–relational impedance mismatch, which led to the coining of the term "post-relational" and also the development of hybrid object–relational databases. The next generation of post-relational databases in the late 2000s became known as NoSQL databases, introducing fast key–value stores and document-oriented databases. A competing "next generation" known as NewSQL databases attempted new implementations that retained the relational/SQL model while aiming to match the high performance of NoSQL compared to commercially available relational DBMSs. === 1960s, navigational DBMS === The introduction of the term database coincided with the availability of direct-access storage (disks and drums) from the mid-1960s onwards. The term represented a contrast with the tape-based systems of the past, allowing shared interactive use rather than daily batch processing. The Oxford English Dictionary cites a 1962 report by the System Development Corporation of California as the first to use the term "data-base" in a specific technical sense. As computers grew in speed and capability, a number of general-purpose database systems emerged; by the mid-1960s a number of such systems had come into commercial use. Interest in a standard began to grow, and Charles Bachman, author of one such product, the Integrated Data Store (IDS), founded the Database Task Group within CODASYL, the group responsible for the creation and standardization of COBOL. In 1971, the Database Task Group delivered their standard, which generally became known as the CODASYL approach, and soon a number of commercial products based on this approach entered the market. The CODASYL approach of

    Read more →
  • Depth peeling

    Depth peeling

    In computer graphics, depth peeling is an exact multipass method of order-independent transparency that extracts transparent fragments into depth layers and composites those layers in depth order. Depth peeling has the advantage of being able to generate correct results even for complex images containing intersecting transparent objects. == Method == Depth peeling works by rendering the image multiple times. Depth peeling uses two Z buffers, one that works conventionally, and one that is not modified, and sets the minimum distance at which a fragment can be drawn without being discarded. For each pass, the previous pass' conventional Z-buffer is used as the minimal Z-buffer, so each pass removes already-captured nearer fragments and draws the next depth layer behind them. The resulting images can then be composited in depth order to form a single image. A major drawback of classical depth peeling is performance: it requires one geometry pass per peeled layer, so scenes with high depth complexity require many passes that each re-rasterize the transparent geometry. Later variants reduce the number of passes by peeling multiple layers or both front and back layers in a pass. Dual depth peeling reduces the geometry-pass count from N to N/2+1 by peeling one layer from the front and one from the back in each pass, while multi-layer depth peeling peels several layers per pass and reported up to an 8x speed-up in RGBA8 settings.

    Read more →
  • Cloud computing

    Cloud computing

    Cloud computing is defined by the International Organization for Standardization (ISO) as "a paradigm for enabling network access to a scalable and elastic pool of shareable physical or virtual resources with self-service provisioning and administration on demand". It is commonly referred to as "the cloud". == Characteristics == In 2011, the National Institute of Standards and Technology (NIST) identified five "essential characteristics" for cloud systems. Below are the exact definitions according to NIST: On-demand self-service: "A consumer can unilaterally provision computing capabilities, such as server time and network storage, as needed automatically without requiring human interaction with each service provider." Broad network access: "Capabilities are available over the network and accessed through standard mechanisms that promote use by heterogeneous thin or thick client platforms (e.g., mobile phones, tablets, laptops, and workstations)." Resource pooling: " The provider's computing resources are pooled to serve multiple consumers using a multi-tenant model, with different physical and virtual resources dynamically assigned and reassigned according to consumer demand." Rapid elasticity: "Capabilities can be elastically provisioned and released, in some cases automatically, to scale rapidly outward and inward commensurate with demand. To the consumer, the capabilities available for provisioning often appear unlimited and can be appropriated in any quantity at any time." Measured service: "Cloud systems automatically control and optimize resource use by leveraging a metering capability at some level of abstraction appropriate to the type of service (e.g., storage, processing, bandwidth, and active user accounts). Resource usage can be monitored, controlled, and reported, providing transparency for both the provider and consumer of the utilized service. By 2023, the International Organization for Standardization (ISO) had expanded and refined the list. == History == The history of cloud computing extends to the 1960s, with the initial concepts of time-sharing becoming popularized via remote job entry (RJE). The "data center" model, where users submitted jobs to operators to run on mainframes, was predominantly used during this era. This period saw broad experimentation with making large-scale computing power more accessible through time-sharing, while optimizing infrastructure, platforms, and applications to improve efficiency for end users. The "cloud" metaphor for virtualized services dates to 1994, when it was used by General Magic for the universe of "places" that mobile agents in the Telescript environment could "go". The metaphor is credited to David Hoffman, a General Magic communications specialist, based on its long-standing use in networking and telecom. The expression cloud computing became more widely known in 1996 when Compaq Computer Corporation drew up a business plan for future computing and the Internet. The company's ambition was to supercharge sales with "cloud computing-enabled applications". The business plan foresaw that online consumer file storage would likely be commercially successful. As a result, Compaq decided to sell server hardware to internet service providers. In the 2000s, the application of cloud computing began to take shape with the establishment of Amazon Web Services (AWS) in 2002, which allowed developers to build applications independently. In 2006 Amazon Simple Storage Service, known as Amazon S3, and the Amazon Elastic Compute Cloud (EC2) were released. In 2008 NASA's development of the first open-source software for deploying private and hybrid clouds. The following decade saw the launch of various cloud services. In 2010, Microsoft launched Microsoft Azure, and Rackspace Hosting and NASA initiated an open-source cloud-software project, OpenStack. IBM introduced the IBM SmartCloud framework in 2011, and Oracle announced the Oracle Cloud in 2012. In December 2019, Amazon launched AWS Outposts, a service that extends AWS infrastructure, services, APIs, and tools to customer data centers, co-location spaces, or on-premises facilities. == Value proposition == Cloud computing can shorten time to market by offering pre-configured tools, scalable resources, and managed services, allowing users to focus on core business value rather than maintaining infrastructure. Cloud platforms can enable organizations and individuals to reduce upfront capital expenditures on physical infrastructure by shifting to an operational expenditure model, where costs scale with usage. Cloud platforms also offer managed services and tools, such as artificial intelligence, data analytics, and machine learning, which might otherwise require significant in-house expertise and infrastructure investment. While cloud computing can offer cost advantages through effective resource optimization, organizations often face challenges such as unused resources, inefficient configurations, and hidden costs without proper oversight and governance. Many cloud platforms provide cost management tools, such as AWS Cost Explorer and Azure Cost Management, and frameworks like FinOps have emerged to standardize financial operations in the cloud. Cloud computing also facilitates collaboration, remote work, and global service delivery by enabling secure access to data and applications from any location with an internet connection. Cloud providers offer various redundancy options for core services, such as managed storage and managed databases, though redundancy configurations often vary by service tier. Advanced redundancy strategies, such as cross-region replication or failover systems, typically require explicit configuration and may incur additional costs or licensing fees. Cloud environments operate under a shared responsibility model, where providers are typically responsible for infrastructure security, physical hardware, and software updates, while customers are accountable for data encryption, identity and access management (IAM), and application-level security. These responsibilities vary depending on the cloud service model—Infrastructure as a Service (IaaS), Platform as a Service (PaaS), or Software as a Service (SaaS)—with customers typically having more control and responsibility in IaaS environments and progressively less in PaaS and SaaS models, often trading control for convenience and managed services. == Adoption and suitability == The decision to adopt cloud computing or maintain on-premises infrastructure depends on factors such as scalability, cost structure, latency requirements, regulatory constraints, and infrastructure customization. Organizations with variable or unpredictable workloads, limited capital for upfront investments, or a focus on rapid scalability benefit from cloud adoption. Startups, SaaS companies, and e-commerce platforms often prefer the pay-as-you-go operational expenditure (OpEx) model of cloud infrastructure. Additionally, companies prioritizing global accessibility, remote workforce enablement, disaster recovery, and leveraging advanced services such as AI/ML and analytics are well-suited for the cloud. In recent years, some cloud providers have started offering specialized services for high-performance computing and low-latency applications, addressing some use cases previously exclusive to on-premises setups. On the other hand, organizations with strict regulatory requirements, highly predictable workloads, or reliance on deeply integrated legacy systems may find cloud infrastructure less suitable. Businesses in industries like defense, government, or those handling highly sensitive data often favor on-premises setups for greater control and data sovereignty. Additionally, companies with ultra-low latency requirements, such as high-frequency trading (HFT) firms, rely on custom hardware (e.g., FPGAs) and physical proximity to exchanges, which most cloud providers cannot fully replicate despite recent advancements. Similarly, tech giants like Google, Meta, and Amazon build their own data centers due to economies of scale, predictable workloads, and the ability to customize hardware and network infrastructure for optimal efficiency. However, these companies also use cloud services selectively for certain workloads and applications where it aligns with their operational needs. In practice, many organizations are increasingly adopting hybrid cloud architectures, combining on-premises infrastructure with cloud services. This approach allows businesses to balance scalability, cost-effectiveness, and control, offering the benefits of both deployment models while mitigating their respective limitations. == Challenges and limitations == One of the primary challenges of cloud computing, compared with traditional on-premises systems, is maintaining data security and privacy. Cloud users entrust their sensitive data to third-party providers, who may not have adequate measures to protect it from unau

    Read more →
  • ISO/IEC JTC 1/SC 24

    ISO/IEC JTC 1/SC 24

    ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation is a standardization subcommittee of the joint subcommittee ISO/IEC JTC 1 of the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC), which develops and facilitates standards within the field of computer graphics, image processing, and environmental data representation. The international secretariat of ISO/IEC JTC 1/SC 24 is the British Standards Institute (BSI) located in the United Kingdom. == History == ISO/IEC JTC 1/SC 24 was formed in 1987 from ISO/TC 97 as a result of Resolution 21 at the ISO/IEC JTC 1 plenary. The group's origins began in computer graphics, the standardization of which was originally under ISO/IEC JTC 1/SC 21/WG 2. However, when ISO/IEC JTC 1/SC 24 was created, the standardization activity of ISO/IEC JTC 1/SC 21/WG 2 was carried over to the new subcommittee. The initial five working groups of ISO/IEC JTC 1/SC 24 were titled, “Architecture,” “Application programming interfaces,” “Metafiles and interfaces,” “Language bindings,” and “Validation, testing and registration.” The work of ISO/IEC JTC 1/SC 24 began with the Graphical Kernel System (GKS), which was adopted from ISO/IEC JTC 1/SC 21/WG 2. However, since GKS only addressed 2D functionality, attention turned to the standardization of 3D functionality. This resulted in two standards being published: GKS-3D in 1988 and PHIGS in 1989, both of which addressed 3D functionality. Since 1991, ISO/IEC JTC 1/SC 24 has held plenaries in a number of countries, including the Netherlands, Germany, United States, France, Canada, Japan, Sweden, Korea, United Kingdom, Australia, and Czech Republic. == Scope == The scope of ISO/IEC JTC 1/SC 24 is the “Standardization of interfaces for information technology based applications relating to”: Computer graphics Image processing Environmental data representation Support for the Mixed and Augmented Reality (MAR) Interaction with, and visual representation of, information Included are the following related areas: Modeling and simulation and related reference models Virtual reality with accompanying augmented reality/augmented virtuality aspects and related reference models Application program interfaces Functional specifications Representation models Interchange formats, encodings and their specifications, including metafiles Device interfaces Testing methods Registration procedures Presentation and support for creation of multimedia, hypermedia, and mixed reality documents Excluded are the following areas: Character and image coding Coding of multimedia, hypermedia, and mixed reality document interchange formats JTC 1 work in user system interfaces and document presentation ISO/TC 207 work on ISO 14000 environment management, ISO/TC 211 work on geographic information and geomatics Software environments as described by ISO/IEC JTC 1/SC 22 == Structure == ISO/IEC JTC 1/SC 24 is made up of four active working groups, each of which carries out specific tasks in standards development within the field of computer graphics, image processing and environmental data representation, together with ITU-T Study Group 16. As a response to changing standardization needs, working groups of ISO/IEC JTC 1/SC 24 can be disbanded if their area of work is no longer applicable, or established if new working areas arise. The focus of each working group is described in the group's terms of reference. Active working groups of ISO/IEC JTC 1/SC 24 are: == Collaborations == ISO/IEC JTC 1/SC 24 works in close collaboration with a number of other organizations or subcommittees, both internal and external to ISO or IEC, in order to avoid conflicting or duplicative work. Organizations internal to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: ISO/IEC JTC 1/WG 7, Sensor Networks ISO/IEC JTC 1/SC 29, Coding of audio, picture, multimedia and hypermedia information ISO/IEC JTC 1/SC 32, Data management and interchange ISO/TAG 14, Imagery and technology ISO/TC 130, Graphic Technology ISO/TC 184/SC 4, Industrial data ISO/TC 211, Geographic information/Geomatics ISO/TC 215, Health informatics IEC TC 100, Audio, video and multimedia system and equipment Some organizations external to ISO or IEC that collaborate with or are in liaison to ISO/IEC JTC 1/SC 24 include: Defence Geospatial Information Working Group (DGIWG) Digital Imaging and Communications in Medicine (DICOM) International Hydrographic Organization (IHO) The Khronos Group NATO - Joint Intelligence Surveillance and Reconnaissance Capability Group (JISRCG) OMG Robotics DTF Open CGM Open Geospatial Consortium (OGC) SEDRIS Organization Simulation Interoperability Standards Organization (SISO) US National Imagery Transmission Format Standard (NITFS) Technical Board (US NTB) Web3D Consortium World Intellectual Property Organization (WIPO) World Wide Web Consortium (W3C) == Member countries == Countries pay a fee to ISO to be members of subcommittees. The 11 "P" (participating) members of ISO/IEC JTC 1/SC 24 are: Australia, China, Egypt, France, India, Japan, Republic of Korea, Portugal, Russian Federation, United Kingdom, and United States. The 22 "O" (observer) members of ISO/IEC JTC 1/SC 24 are: Argentina, Austria, Belgium, Bosnia and Herzegovina, Bulgaria, Canada, Cuba, Czech Republic, Finland, Ghana, Hungary, Iceland, Indonesia, Islamic Republic of Iran, Italy, Kazakhstan, Malaysia, Poland, Romania, Serbia, Slovakia, Switzerland, and Thailand. == Published standards == ISO/IEC JTC 1/SC 24 currently has 80 published standards under their direct responsibility within the field of computer graphics, image processing, and environmental data representation, including:

    Read more →
  • Shape table

    Shape table

    Shape tables are a feature of the Apple II ROMs which allows for manipulation of small images encoded as a series of vectors. An image (or shape) can be drawn in the high-resolution graphics mode—with scaling and rotation—via software routines in the ROM. Shape tables are supported via Applesoft BASIC and from machine code in the "Programmer's Aid" package that was bundled with the original Integer BASIC ROMs for that computer. Applesoft's high-resolution graphics routines were not optimized for speed, so shape tables were not typically used for performance-critical software such as games, which were typically written in assembly language and used pre-shifted bitmap shapes. Shape tables were used primarily for static shapes and sometimes for fancy text; Beagle Bros offered a number of fonts in Font Mechanic as Applesoft shape tables. == Technical details == The vectors of a two-dimensional graphic, each encoding a direction from the previous pixel along with a flag indicating whether the new pixel should be illuminated or not, were encoded up to three in a byte. These were stored in a table via the Monitor or the POKE command. From there, the graphic could be referenced by number (a table could contain up to 255 shapes), and built-in Applesoft routines permitted scaling, rotating, and drawing or erasing the shape. An XOR mode was also available to allow the shape to be visible on any color background; this had the advantage, also, of allowing the shape to be easily erased by redrawing it. Apple did not provide any utilities for creating shape tables; they had to be created by hand, usually by plotting on graph paper, then calculating the hexadecimal values and entering them into the computer. Beagle Bros created a shape table editing program, which eliminated the "number crunching", called Apple Mechanic, and a related program, Font Mechanic.

    Read more →
  • Joox

    Joox

    Joox (stylised in all caps) is a music streaming service owned by Tencent, launched in January 2015. Joox is the biggest music streaming app in Asian markets such as Hong Kong, Macau, Indonesia, Malaysia, Myanmar, Thailand and also in South Africa before it was shut down in early 2022. Joox is a freemium service, providing most of its songs free, while some songs are only available for premium users, offered via paid subscriptions or by doing different tasks offered. In 2017, Joox launched their service in their first non-Asian market, South Africa, which for an unknown reason shut down five years later. The service now accounts for more than 50% of all music streaming app downloads in their Asian markets. The number of music-streaming users in Hong Kong, Macau, Malaysia, Thailand, Myanmar and Indonesia was expected to reach 87 million by 2020. == Background == Before the emergence of Joox, Tencent owned QQ Music, one of the largest music streaming and download service in China. In 2015, they introduced Joox as their expansion of music services to overseas market instead of mainland China, starting first in Hong Kong. Instead of providing free services by playing audio ads to users like Spotify, another major music service, Joox focused on banner ads, splash ads and other advertising methods such as category playlists and in-app skins. They claimed it as a success. Joox offered their premium VIP access to DStv subscribers free of charge. DStv is the sister company to Tencent and is the primary pay-TV provider in South Africa. In November 2021, it was announced that Joox will stop streaming in South Africa in March 2022.

    Read more →
  • Onshape

    Onshape

    Onshape is a computer-aided design (CAD) software system, delivered over the Internet via a software as a service (SaaS) model. It makes extensive use of cloud computing, with compute-intensive processing and rendering performed on Internet-based servers, and users are able to interact with the system via a web browser or the iOS and Android apps. As a SaaS system, Onshape upgrades are released directly to the web interface, and the software does not require maintenance by the user. Onshape allows teams to collaborate on a single shared design, the same way multiple writers can work together editing a shared document via cloud services. It is primarily focused on mechanical CAD (MCAD) and is used for product and machinery design across many industries, including consumer electronics, mechanical machinery, medical devices, 3D printing, machine parts, and industrial equipment. As of 2025, Onshape is popularly used as a CAD suite for the FIRST Robotics Competition (FRC) alongside the MKCad application available in the Onshape App Store. == Company history == Onshape was developed by a company with the same name. Founded in 2012, Onshape was based in Cambridge, Massachusetts (USA), with offices in Singapore and Pune, India. Its leadership team includes several engineers and executives who originated from SolidWorks, a popular 3D CAD program that runs on Microsoft Windows. Onshape’s co-founders include two former SolidWorks CEOs, Jon Hirschtick and John McEleney. In November 2012, former SolidWorks CEOs Jon Hirschtick and John McEleney led six co-founders launching Belmont Technology, a placeholder name that was later changed to Onshape. The company’s first round of funding was $9 million from North Bridge Venture Partners and Commonwealth Capital. In March 2015, Onshape released the public beta version of its cloud CAD software, after pre-production testing with more than a thousand CAD professionals in 52 countries. Included in the beta launch was Onshape for iPhone. In August 2015, the company released its Onshape for Android app. In December 2015, Onshape launched its full commercial release. The company also launched the Onshape App Store, offering CAM, simulation, rendering and other cloud-based engineering tools. The Onshape App Store was launched with 24 developer partners. In April 2016, Onshape introduced its Education Plan, with a free version of Onshape Professional geared for college students and educators. In May 2016, Onshape released FeatureScript, a new open source (MIT licensed) programming language for creating and customizing CAD features. In October 2019, Onshape agreed to be acquired by PTC. The acquisition closed in November 2019 for $470 million. In February 2024, Onshape released iOS support for the Apple Vision Pro, allowing for real world applications of CAD models and prototypes. In January 2025, Onshape released the CAM studio, allowing users to generate G-code for up to 5-axis Simultaneous milling. == Funding == Onshape was a venture-backed company with investments from firms including Andreessen Horowitz, Commonwealth Capital Ventures, New Enterprise Associates (NEA) and North Bridge Venture Partners. Total venture funding amounted to $169 million. == Supported file formats == === Modelling === ==== Importing ==== As of May 2025, Onshape supported importing (opening) the following common CAD file formats: Parasolid X_T (Preferred) STEP (ISO 10303) ISO JT (ISO 14306) ACIS IGES CATIA v4, v5, v6 Autodesk Inventor Part (.IPT) Assembly (.IAM) Presentation (.IPN) Drawing (.IDW) Pro/ENGINEER, Creo Rhinoceros 3D: .3dm .STL .OBJ SolidWorks file formats Siemens NX file formats Drawings (.DXF/.DWG) ==== Exporting ==== Onshape supports exporting to the following formats: STEP (ISO 10303) Parasolid XT ACIS IGES SolidWorks file formats .STL Rhinoceros 3D: .3dm Collada XML-spec based textual file === Drawing === Ordinary engineering or technical drawing can be exported as .PDF file. === Other Formats === In addition to CAD file formats, Onshape supports importing some Non-CAD file formats for viewing and referencing. === Assembly === Assemblies can be imported and exported to: STEP (ISO 10303) Parasolid XT ACIS Pro/ENGINEER, Creo ISO JT Rhinoceros 3D: .3dm Siemens NX file formats SolidWorks Pack and Go zip file File formats that assemblies can be only-exported to, are: IGES .STL Collada XML-spec based textual file

    Read more →
  • List of color palettes

    List of color palettes

    The following is a list that contains color palettes for notable computer graphics, terminals and video game consoles. Only a simulated image using a palette and its name are given. Main articles are linked from the name of each palette, test charts, sample colours, simulated images, and further technical details (including references). During older eras of computing, manufacturers developed many different display systems often in a competitive, non-collaborative basis (with a few exceptions in the VESA consortium), creating many proprietary, non-standard different instances of display hardware. Often, as with early personal and home computers, a given machine employed its unique display subsystem, also with its unique color palette. Furthermore, software developers had made use of the color abilities of distinct display systems in many different ways. The result is that there is no single common standard nomenclature or classification taxonomy which can encompass every computer color palette. In order to organize the material, color palettes have been grouped following certain criteria. First, generic monochrome and full RGB repertories common to various computer display systems are listed. Then, usual color repertories used for display systems that employ indexed color techniques. And finally, specific manufacturers' color palettes implemented in many representative early personal computers and video game consoles of various brands. The list for personal computer palettes is split into two categories: 8-bit and 16-bit machines. This is not intended as a true strict categorization of such machines, because mixed architectures also exist (16-bit processors with an 8-bit data bus or 32-bit processors with a 16-bit data bus, among others). The distinction is based more on broad 8-bit and 16-bit computer ages or generations (around 1975–1985 and 1985–1995, respectively) and their associated state of the art in color display capabilities. The following is the common color test chart and sample image used to render each palette in this list: See further details in the summary paragraph of the corresponding article. == List of monochrome and RGB palettes == In this article, the term monochrome palette means a set of intensities for a monochrome display, and the term RGB palette is defined as the complete set of combinations a given RGB display can offer by mixing all the possible intensities of the red, green, and blue primaries available in its hardware. These are generic complete repertories of colors to produce black and white and RGB color pictures by the display hardware, not necessarily the total number of such colors that can be simultaneously displayed in a given text or graphic mode of any machine. RGB is the most common method to produce colors for displays; so these complete RGB color repertories have every possible combination of R-G-B triplets within any given maximum number of levels per component. For specific hardware and different methods to produce colors than RGB, see the List of computer hardware palettes and the List of video game consoles sections. For various software arrangements and sorts of colors, including other possible full RGB arrangements within 8-bit depth displays, see the List of software palettes section. === Monochrome palettes === These palettes only have shades of gray. === Dichrome palettes === Each permuted pair of red, green, and blue (16-bit color palette, with 65,536 colors). For example, "additive red green" has zero blue and "subtractive red green" has full blue. === Regular RGB palettes === These full RGB palettes employ the same number of bits to store the relative intensity for the red, green and blue components of every image's pixel color. Thus, they have the same number of levels per channel and the total number of possible colors is always the cube of a power of two. It should be understood that 'when developed' many of these formats were directly related to the size of some host computers 'natural word length' in bytes—the amount of memory in bits held by a single memory address such that the CPU can grab or put it in one operation. === Non-regular RGB palettes === These are also RGB palettes, in the sense defined above (except for 4-bit RGBI, which has an intensity bit that affects all channels at once), but either they do not have the same number of levels for each primary channel, or the numbers are not powers of two, so are not represented as separate bit fields. All of these have been used in popular personal computers. == List of software palettes == Systems that use a 4-bit or 8-bit pixel depth can display up to 16 or 256 colors simultaneously. Many personal computers in the later 1980s and early 1990s displayed at most 256 different colors, freely selected by software (either by the user or by a program) from their wider hardware's color palette. Usual selections of colors in limited subsets (generally 16 or 256) of the full palette includes some RGB level arrangements commonly used with the 8 bpp palettes as master palettes or universal palettes (i.e., palettes for multipurpose uses). These are some representative software palettes, but any selection can be made in such types of systems. === System specific palettes === These are selections of colors officially employed as system palettes in some popular operating systems for personal computers that feature 8-bit displays. === RGB arrangements === These are selections of colors based on evenly ordered RGB levels, mainly used as master palettes to display any kind of image within the limitations of the 8-bit pixel depth. === Other common uses of software palettes === == List of computer hardware palettes == In old personal computers and terminals that offered color displays, some color palettes were chosen algorithmically to provide the most diverse set of colors for a given palette size, and others were chosen to assure the availability of certain colors. In many early home computers, especially when the palette choices were determined at the hardware level by resistor combinations, the palette was determined by the manufacturer. Many early models output composite video colors. When seen on TV devices, the perception of the colors may not correspond with the value levels for the color values employed (most noticeable with NTSC TV color system). For current RGB display systems for PCs (Super VGA, etc.), see the 16-bit RGB and 24-bit RGB for High Color (thousands) and True Color (millions of colors) modes. For video game consoles, see the List of video game consoles section. For every model, their main different graphical color modes are listed based exclusively in the way they handle colors on screen, not all their different screen modes. The list is organized roughly historically by video hardware, not by branch. They are listed according to the original model of each system, which means that extended versions, clones, and compatibles also support the original palette. === Terminals and 8-bit machines === === 16-bit machines === === Video game console palettes === Color palettes of some of the most popular video game consoles. The criteria are the same as those of the List of computer hardware palettes section.

    Read more →
  • Telebirr

    Telebirr

    Telebirr (Amharic: ቴሌብር) is a mobile payment service developed and was launched by Ethio telecom, the state owned telecommunication and Internet service provider in Ethiopia. It took five months to develop the end-to-end service. It facilitates the delivery of cashless transactions. The platform deployed currently has the capacity of processing up to 100 transactions per second (TPS) and can be scaled up to 1000 TPS. The service is accessible via SMS, USSD, and smartphone applications. Telebirr works in five languages. == Services == Though the service is fully accessible for any customer of Ethio telecom, the users need to register through the mobile application called Telebirr or using an authorized agent or Ethio telecom shop or Unstructured Supplementary Service Data (USSD), 127# nationally. However, Telebirr also provides a “quick registration” by using any information that already exists in Ethio telecom's system.

    Read more →
  • Graphics address remapping table

    Graphics address remapping table

    The graphics address remapping table (GART), also known as the graphics aperture remapping table, or graphics translation table (GTT), is an I/O memory management unit (IOMMU) used by Accelerated Graphics Port (AGP) and PCI Express (PCIe) graphics cards. The GART allows the graphics card direct memory access (DMA) to the host system memory, through which buffers of textures, polygon meshes and other data are loaded. AMD later reused the same mechanism for I/O virtualization with other peripherals including disk controllers and network adapters. A GART is used as a means of data exchange between the main memory and video memory through which buffers (i.e. paging/swapping) of textures, polygon meshes and other data are loaded, but can also be used to expand the amount of video memory available for systems with only integrated or shared graphics (i.e. no discrete or inbuilt graphics processor), such as Intel HD Graphics processors. However, this type of memory (expansion) remapping has a caveat that affects the entire system: specifically, any GART, pre-allocated memory becomes pooled and cannot be utilised for any other purposes but graphics memory and display rendering. Since PCI Express, the GART is extended to the GTT (Graphics Translation Table), which act as a buffer or cache between system memory and graphics card, and in PCI Express, the GTT buffer size is changeable by the GPU driver. == Operating system support == === Windows === Support for AGP GART was added since Windows 95 OSR2. Later, support for GTT was added since Windows XP SP2 and Windows Vista. === Linux === Jeff Hartmann served as the primary maintainer of the Linux kernel's agpgart driver, which began as part of Brian Paul's Utah GLX accelerated Mesa 3D driver project. The developers primarily targeted Linux 2.4.x kernels, but made patches available against older 2.2.x kernels. Dave Jones heavily reworked agpgart for the Linux 2.6.x kernels, along with more contributions from Jeff Hartmann. === FreeBSD === In FreeBSD, the agpgart driver appeared in its 4.1 release. === Solaris === AGPgart support was introduced into Solaris Express Developer Edition as of its 7/05 release.

    Read more →
  • JasPer

    JasPer

    JasPer is a computer software project to create a reference implementation of the codec specified in the JPEG-2000 Part-1 standard (i.e. ISO/IEC 15444-1) - started in 1997 at Image Power Inc. and at the University of British Columbia. It consists of a C library and some sample applications useful for testing the codec. The copyright owner began licensing the code to the public under an MIT License-style license in 2004 in response to requests from the open-source community. As of 2011 JasPer operated as a component of many software projects, both free and proprietary, including (but not limited to) netpbm (as of release 10.12), ImageMagick and KDE (as of version 3.2). As of 22 June 2010 the GEGL graphics library supported JasPer in its latest Git versions. In a series of objective JPEG-2000-compression quality tests conducted in 2004, "JasPer was the best codec, closely followed by IrfanView and Kakadu". However, Jasper remains one of the slowest implementations of the JPEG-2000 codec, as it was designed for reference, not performance. == Etymology == The name "JasPer" has simultaneous connotations with Canada's Jasper National Park, with the semi-precious gemstone, jasper, and with "JP" as an abbreviation of the JPEG-2000 standard.

    Read more →
  • Telebirr

    Telebirr

    Telebirr (Amharic: ቴሌብር) is a mobile payment service developed and was launched by Ethio telecom, the state owned telecommunication and Internet service provider in Ethiopia. It took five months to develop the end-to-end service. It facilitates the delivery of cashless transactions. The platform deployed currently has the capacity of processing up to 100 transactions per second (TPS) and can be scaled up to 1000 TPS. The service is accessible via SMS, USSD, and smartphone applications. Telebirr works in five languages. == Services == Though the service is fully accessible for any customer of Ethio telecom, the users need to register through the mobile application called Telebirr or using an authorized agent or Ethio telecom shop or Unstructured Supplementary Service Data (USSD), 127# nationally. However, Telebirr also provides a “quick registration” by using any information that already exists in Ethio telecom's system.

    Read more →
  • Tandem Money

    Tandem Money

    Tandem is one of the UK's original challenger banks. Tandem is a digital bank with a mobile app, and no branches. The acquisition of Harrods Bank in 2017 allowed the company to provide services using the former's banking licence. Tandem Bank Limited is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority. Tandem has offices across the UK in Blackpool, Cardiff, Durham and London, employing over 500 people. == History == The company was founded by Ricky Knox, Matt Cooper and Michael Kent in 2014. In December 2016, Tandem announced that it had secured a £35 million investment from The Sanpower Group, the Chinese company that also owned the department store House of Fraser; however, £29 million of this investment was later revoked by Sanpower over concerns that the Chinese Government would object to the investment following increased restrictions on outbound investment in China. This resulted in a delay in the launch of Tandem's savings products, which, at the time of the revocation, was expected imminently and, more importantly, meant that Tandem volunteered the return of their banking license but retained all other permissions. In April 2018, Tandem launched fixed-term savings accounts, offering one-, two- and three-year terms through its app. === Acquisitions === In August 2017, it was announced that Tandem would fully acquire Harrods Bank, founded in 1893, in a deal that would bring a near-£200m loan book, over £300m of deposits and nearly £80 million of capital. Prior to its sale to Tandem Money, Harrods Bank catered for high-net-worth (HNW) individuals and operated from the Harrods store in Knightsbridge, London. It offered a variety of personal and business current and savings accounts, mortgages, foreign currency and gold bullion trading services. On 7 August 2017, Tandem Money Limited announced a deal to acquire 100% of Harrods Bank Limited shares. The purchase deal closed successfully on 11 January 2018. In March 2018, Tandem agreed to acquire Pariti Technologies Limited, developers of the Pariti money management application. In August 2020 Tandem acquired green home improvement loan specialists Allium Lending Group. It was announced on 8 February 2021 that Tandem had agreed to purchase the mortgage book from private bank Bank and Clients, consisting of 300 B&C customers for an undisclosed amount. In January 2022 Tandem Bank acquired consumer lender Oplo, creating a combined business with £1.2 billion of total assets. In April 2023, it was announced that Tandem had acquired money-sharing app Loop Money. At the time of the purchase, one of Loop's founders – Paul Pester – was also chairman at Tandem. == Features == Tandem Bank offers customers savings, mortgages, personal and secured loans, green home improvement loans and motor finance. In November 2022, the bank launched its new Tandem Marketplace, providing information and resources to help promote greener living.

    Read more →